1 | $ ./configure --help |
---|
2 | `configure' configures poppler 0.8.5 to adapt to many kinds of systems. |
---|
3 | |
---|
4 | Usage: ./configure [OPTION]... [VAR=VALUE]... |
---|
5 | |
---|
6 | To assign environment variables (e.g., CC, CFLAGS...), specify them as |
---|
7 | VAR=VALUE. See below for descriptions of some of the useful variables. |
---|
8 | |
---|
9 | Defaults for the options are specified in brackets. |
---|
10 | |
---|
11 | Configuration: |
---|
12 | -h, --help display this help and exit |
---|
13 | --help=short display options specific to this package |
---|
14 | --help=recursive display the short help of all the included packages |
---|
15 | -V, --version display version information and exit |
---|
16 | -q, --quiet, --silent do not print `checking...' messages |
---|
17 | --cache-file=FILE cache test results in FILE [disabled] |
---|
18 | -C, --config-cache alias for `--cache-file=config.cache' |
---|
19 | -n, --no-create do not create output files |
---|
20 | --srcdir=DIR find the sources in DIR [configure dir or `..'] |
---|
21 | |
---|
22 | Installation directories: |
---|
23 | --prefix=PREFIX install architecture-independent files in PREFIX |
---|
24 | [/usr/local] |
---|
25 | --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
---|
26 | [PREFIX] |
---|
27 | |
---|
28 | By default, `make install' will install all the files in |
---|
29 | `/usr/local/bin', `/usr/local/lib' etc. You can specify |
---|
30 | an installation prefix other than `/usr/local' using `--prefix', |
---|
31 | for instance `--prefix=$HOME'. |
---|
32 | |
---|
33 | For better control, use the options below. |
---|
34 | |
---|
35 | Fine tuning of the installation directories: |
---|
36 | --bindir=DIR user executables [EPREFIX/bin] |
---|
37 | --sbindir=DIR system admin executables [EPREFIX/sbin] |
---|
38 | --libexecdir=DIR program executables [EPREFIX/libexec] |
---|
39 | --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
---|
40 | --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
---|
41 | --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
---|
42 | --libdir=DIR object code libraries [EPREFIX/lib] |
---|
43 | --includedir=DIR C header files [PREFIX/include] |
---|
44 | --oldincludedir=DIR C header files for non-gcc [/usr/include] |
---|
45 | --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
---|
46 | --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
---|
47 | --infodir=DIR info documentation [DATAROOTDIR/info] |
---|
48 | --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
---|
49 | --mandir=DIR man documentation [DATAROOTDIR/man] |
---|
50 | --docdir=DIR documentation root [DATAROOTDIR/doc/poppler] |
---|
51 | --htmldir=DIR html documentation [DOCDIR] |
---|
52 | --dvidir=DIR dvi documentation [DOCDIR] |
---|
53 | --pdfdir=DIR pdf documentation [DOCDIR] |
---|
54 | --psdir=DIR ps documentation [DOCDIR] |
---|
55 | |
---|
56 | Program names: |
---|
57 | --program-prefix=PREFIX prepend PREFIX to installed program names |
---|
58 | --program-suffix=SUFFIX append SUFFIX to installed program names |
---|
59 | --program-transform-name=PROGRAM run sed PROGRAM on installed program names |
---|
60 | |
---|
61 | X features: |
---|
62 | --x-includes=DIR X include files are in DIR |
---|
63 | --x-libraries=DIR X library files are in DIR |
---|
64 | |
---|
65 | System types: |
---|
66 | --build=BUILD configure for building on BUILD [guessed] |
---|
67 | --host=HOST cross-compile to build programs to run on HOST [BUILD] |
---|
68 | |
---|
69 | Optional Features: |
---|
70 | --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
---|
71 | --enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
---|
72 | --enable-shared[=PKGS] build shared libraries [default=yes] |
---|
73 | --enable-static[=PKGS] build static libraries [default=yes] |
---|
74 | --enable-fast-install[=PKGS] |
---|
75 | optimize for fast installation [default=yes] |
---|
76 | --disable-dependency-tracking speeds up one-time build |
---|
77 | --enable-dependency-tracking do not reject slow dependency extractors |
---|
78 | --disable-libtool-lock avoid locking (might break parallel builds) |
---|
79 | --enable-xpdf-headers Install unsupported xpdf headers. |
---|
80 | --enable-fixedpoint use fixed point (instead of floating point) arithmetic |
---|
81 | --enable-exceptions use C++ exceptions |
---|
82 | --disable-largefile omit support for large files |
---|
83 | --enable-zlib Build with zlib |
---|
84 | --disable-libjpeg Don't build against libjpeg. |
---|
85 | --disable-splash-output Don't build the Splash graphics backend. |
---|
86 | --disable-cairo-output Don't build the cairo graphics backend. |
---|
87 | --disable-poppler-glib Don't compile poppler glib wrapper. |
---|
88 | --enable-gtk-doc use gtk-doc to build documentation default=no |
---|
89 | --disable-gdk Compile without gdk. |
---|
90 | --disable-poppler-qt Don't compile poppler qt wrapper. |
---|
91 | --disable-poppler-qt4 Don't compile poppler Qt4 wrapper. |
---|
92 | --disable-gtk-test Don't compile GTK+ test program. |
---|
93 | --disable-abiword-output |
---|
94 | Don't build the abiword backend. |
---|
95 | --disable-utils Don't compile poppler command line utils. |
---|
96 | --enable-compile-warnings=[no/yes/kde] |
---|
97 | Turn on compiler warnings. |
---|
98 | |
---|
99 | |
---|
100 | Optional Packages: |
---|
101 | --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] |
---|
102 | --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) |
---|
103 | --with-gnu-ld assume the C compiler uses GNU ld [default=no] |
---|
104 | --with-pic try to use only PIC/non-PIC objects [default=use |
---|
105 | both] |
---|
106 | --with-tags[=TAGS] include additional configurations [automatic] |
---|
107 | --with-x use the X Window System |
---|
108 | --with-html-dir=PATH path to installed docs |
---|
109 | |
---|
110 | Some influential environment variables: |
---|
111 | CC C compiler command |
---|
112 | CFLAGS C compiler flags |
---|
113 | LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a |
---|
114 | nonstandard directory <lib dir> |
---|
115 | LIBS libraries to pass to the linker, e.g. -l<library> |
---|
116 | CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if |
---|
117 | you have headers in a nonstandard directory <include dir> |
---|
118 | CPP C preprocessor |
---|
119 | CXX C++ compiler command |
---|
120 | CXXFLAGS C++ compiler flags |
---|
121 | CXXCPP C++ preprocessor |
---|
122 | F77 Fortran 77 compiler command |
---|
123 | FFLAGS Fortran 77 compiler flags |
---|
124 | XMKMF Path to xmkmf, Makefile generator for X Window System |
---|
125 | PKG_CONFIG path to pkg-config utility |
---|
126 | FREETYPE_CFLAGS |
---|
127 | C compiler flags for FREETYPE, overriding pkg-config |
---|
128 | FREETYPE_LIBS |
---|
129 | linker flags for FREETYPE, overriding pkg-config |
---|
130 | FONTCONFIG_CFLAGS |
---|
131 | C compiler flags for FONTCONFIG, overriding pkg-config |
---|
132 | FONTCONFIG_LIBS |
---|
133 | linker flags for FONTCONFIG, overriding pkg-config |
---|
134 | CAIRO_CFLAGS |
---|
135 | C compiler flags for CAIRO, overriding pkg-config |
---|
136 | CAIRO_LIBS linker flags for CAIRO, overriding pkg-config |
---|
137 | POPPLER_GLIB_CFLAGS |
---|
138 | C compiler flags for POPPLER_GLIB, overriding pkg-config |
---|
139 | POPPLER_GLIB_LIBS |
---|
140 | linker flags for POPPLER_GLIB, overriding pkg-config |
---|
141 | GDK_CFLAGS C compiler flags for GDK, overriding pkg-config |
---|
142 | GDK_LIBS linker flags for GDK, overriding pkg-config |
---|
143 | POPPLER_QT4_CFLAGS |
---|
144 | C compiler flags for POPPLER_QT4, overriding pkg-config |
---|
145 | POPPLER_QT4_LIBS |
---|
146 | linker flags for POPPLER_QT4, overriding pkg-config |
---|
147 | GTK_TEST_CFLAGS |
---|
148 | C compiler flags for GTK_TEST, overriding pkg-config |
---|
149 | GTK_TEST_LIBS |
---|
150 | linker flags for GTK_TEST, overriding pkg-config |
---|
151 | ABIWORD_CFLAGS |
---|
152 | C compiler flags for ABIWORD, overriding pkg-config |
---|
153 | ABIWORD_LIBS |
---|
154 | linker flags for ABIWORD, overriding pkg-config |
---|
155 | |
---|
156 | Use these variables to override the choices made by `configure' or to help |
---|
157 | it to find libraries and programs with nonstandard names/locations. |
---|
158 | |
---|