Ticket #20210: July7Run

Last login: Tue Jul  7 14:47:58 on ttyp1
Welcome to Darwin!
Gulliver:~ aszy$ sudo port selfupdate
Password:

MacPorts base version 1.710 installed
Downloaded MacPorts base version 1.710

The MacPorts installation is not outdated so it was not updated
Gulliver:~ aszy$ port outdated        
The following installed ports are outdated:
aalib                          1.4rc5_2 < 1.4rc5_4       
atk                            1.18.0_0 < 1.26.0_1       
autoconf                       2.61_1 < 2.63_0           
automake                       1.10_0 < 1.11_0           
bison                          2.3_0 < 2.4.1_0           
cairo                          1.4.10_0 < 1.8.8_0        
fontconfig                     2.4.2_0 < 2.6.0_2         
freetype                       2.3.5_0 < 2.3.9_0         
gettext                        0.16.1_0 < 0.17_4         
ghostscript                    8.54_0 < 8.64_3           
gimp                           2.2.17_0 < 2.6.6_0        
glib1                          1.2.10_5 < 1.2.10_6       
glib2                          2.12.12_0 < 2.20.4_0      
gnome-icon-theme               2.18.0_1 < 2.26.0_0       
gtk1                           1.2.10_6 < 1.2.10_8       
gtk2                           2.10.13_0 < 2.16.4_0      
help2man                       1.36.4_0 < 1.36.4_1       
icon-naming-utils              0.8.1_0 < 0.8.90_0        
intltool                       0.35.5_0 < 0.40.6_0       
jpeg                           6b_1 < 6b_3               
lcms                           1.16_0 < 1.18a_0          
lesstif                        0.95.0_0 < 0.95.0_3       
libart_lgpl                    2.3.19_1 < 2.3.20_0       
libexif                        0.6.16_0 < 0.6.17_0       
libglade2                      2.6.1_1 < 2.6.4_0         
libgnomecanvas                 2.14.0_1 < 2.26.0_0       
libgnomecups                   0.2.2_0 < 0.2.3_1         
libgnomeprint                  2.12.1_0 < 2.18.6_0       
libgnomeprintui                2.12.1_0 < 2.18.4_0       
libiconv                       1.11_4 < 1.13_0           
libmikmod                      3.2.0-beta2_0 < 3.2.0-beta2_1  
libmng                         1.0.9_0 < 1.0.10_0        
libogg                         1.1.3_0 < 1.1.3_2         
libpng                         1.2.18_0 < 1.2.37_0       
libsdl                         1.2.11_0 < 1.2.13_6       
libsdl_gfx                     2.0.16_0 < 2.0.19_0       
libsdl_image                   1.2.5_1 < 1.2.7_0         
libsdl_mixer                   1.2.7_0 < 1.2.8_1         
libsdl_ttf                     2.0.8_1 < 2.0.9_0         
libtool                        1.5.24_0 < 2.2.6a_0       
libvorbis                      1.1.2_0 < 1.2.2_0         
libwmf                         0.2.8.4_0 < 0.2.8.4_2     
libxml2                        2.6.28_1 < 2.7.3_0        
m4                             1.4.9_0 < 1.4.13_0        
p5-xml-namespacesupport        1.09_0 < 1.10_0           
p5-xml-parser                  2.34_3 < 2.36_0           
p5-xml-simple                  2.16_0 < 2.18_0           
pango                          1.16.4_0 < 1.24.4_0       
perl5.8                        5.8.8_0 < 5.8.9_3         
physfs                         1.0.1_0 < 1.0.2_0         
pkgconfig                      0.22_0 < 0.23_1           
popt                           1.11_1 < 1.15_0           
smpeg                          0.4.4_6 < 0.4.4_8         
tiff                           3.8.2_0 < 3.8.2_3         
xephem                         3.7_0 < 3.7.2_0           
Xft2                           2.1.7_0 < 2.1.13_1        
xmahjongg                      3.6.1_0 < 3.7_2           
xrender                        0.9.0_0 < 0.9.4_5         
zlib                           1.2.3_1 < 1.2.3_2         
Gulliver:~ aszy$ sudo port upgrade outdated
--->  Fetching m4
--->  Attempting to fetch m4-1.4.13.tar.bz2 from http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/m4
--->  Verifying checksum(s) for m4
--->  Extracting m4
--->  Applying patches to m4
--->  Configuring m4
--->  Building m4
--->  Staging m4 into destroot
--->  Deactivating m4 @1.4.9_0
--->  Installing m4 @1.4.13_0
--->  Activating m4 @1.4.13_0
--->  Cleaning m4
--->  Fetching gperf
--->  Attempting to fetch gperf-3.0.4.tar.gz from http://mirrors.kernel.org/gnu/gperf
--->  Verifying checksum(s) for gperf
--->  Extracting gperf
--->  Configuring gperf
--->  Building gperf
--->  Staging gperf into destroot
--->  Installing gperf @3.0.4_0
--->  Activating gperf @3.0.4_0
--->  Cleaning gperf
--->  Fetching libiconv
--->  Attempting to fetch libiconv-1.13.tar.gz from http://mirrors.kernel.org/gnu/libiconv
--->  Verifying checksum(s) for libiconv
--->  Extracting libiconv
--->  Applying patches to libiconv
--->  Configuring libiconv
--->  Building libiconv
--->  Staging libiconv into destroot
--->  Deactivating libiconv @1.11_4+darwin_8
--->  Installing libiconv @1.13_0
--->  Activating libiconv @1.13_0
--->  Cleaning libiconv
--->  Fetching gettext
--->  Attempting to fetch gettext-0.17.tar.gz from http://mirrors.kernel.org/gnu/gettext
--->  Verifying checksum(s) for gettext
--->  Extracting gettext
--->  Applying patches to gettext
--->  Configuring gettext
--->  Building gettext
--->  Staging gettext into destroot
--->  Deactivating gettext @0.16.1_0
--->  Installing gettext @0.17_4
--->  Activating gettext @0.17_4
--->  Cleaning gettext
--->  Fetching help2man
--->  Verifying checksum(s) for help2man
--->  Extracting help2man
--->  Applying patches to help2man
--->  Configuring help2man
--->  Building help2man
--->  Staging help2man into destroot
--->  Deactivating help2man @1.36.4_0+darwin_8
--->  Installing help2man @1.36.4_1
--->  Activating help2man @1.36.4_1
--->  Cleaning help2man
--->  Fetching autoconf
--->  Attempting to fetch autoconf-2.63.tar.bz2 from http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/autoconf
--->  Verifying checksum(s) for autoconf
--->  Extracting autoconf
--->  Configuring autoconf
--->  Building autoconf
--->  Staging autoconf into destroot
--->  Deactivating autoconf @2.61_1
--->  Installing autoconf @2.63_0
--->  Activating autoconf @2.63_0
--->  Cleaning autoconf
--->  Fetching automake
--->  Attempting to fetch automake-1.11.tar.bz2 from http://mirrors.kernel.org/gnu/automake
--->  Verifying checksum(s) for automake
--->  Extracting automake
--->  Configuring automake
--->  Building automake
--->  Staging automake into destroot
--->  Deactivating automake @1.10_0
--->  Installing automake @1.11_0
--->  Activating automake @1.11_0
--->  Cleaning automake
--->  Fetching libtool
--->  Attempting to fetch libtool-2.2.6a.tar.gz from http://mirrors.kernel.org/gnu/libtool
--->  Verifying checksum(s) for libtool
--->  Extracting libtool
--->  Configuring libtool
--->  Building libtool
--->  Staging libtool into destroot
--->  Deactivating libtool @1.5.24_0
--->  Installing libtool @2.2.6a_0
--->  Activating libtool @2.2.6a_0
--->  Cleaning libtool
--->  Fetching aalib
--->  Verifying checksum(s) for aalib
--->  Extracting aalib
--->  Applying patches to aalib
--->  Configuring aalib
--->  Building aalib
--->  Staging aalib into destroot
--->  Deactivating aalib @1.4rc5_2
--->  Installing aalib @1.4rc5_4
--->  Activating aalib @1.4rc5_4
--->  Cleaning aalib
--->  Fetching gnome-common
--->  Attempting to fetch gnome-common-2.26.0.tar.bz2 from http://distfiles.macports.org/gnome-common
--->  Verifying checksum(s) for gnome-common
--->  Extracting gnome-common
--->  Applying patches to gnome-common
--->  Configuring gnome-common
--->  Building gnome-common
--->  Staging gnome-common into destroot
--->  Installing gnome-common @2.26.0_0
--->  Activating gnome-common @2.26.0_0
--->  Cleaning gnome-common
--->  Fetching p5-xml-parser
--->  Attempting to fetch XML-Parser-2.36.tar.gz from http://distfiles.macports.org/perl5
--->  Verifying checksum(s) for p5-xml-parser
--->  Extracting p5-xml-parser
--->  Configuring p5-xml-parser
--->  Building p5-xml-parser
--->  Staging p5-xml-parser into destroot
--->  Deactivating p5-xml-parser @2.34_3
--->  Installing p5-xml-parser @2.36_0
--->  Activating p5-xml-parser @2.36_0
--->  Cleaning p5-xml-parser
--->  Fetching intltool
--->  Attempting to fetch intltool-0.40.6.tar.bz2 from http://distfiles.macports.org/intltool
--->  Verifying checksum(s) for intltool
--->  Extracting intltool
--->  Configuring intltool
--->  Building intltool
--->  Staging intltool into destroot
--->  Deactivating intltool @0.35.5_0
--->  Installing intltool @0.40.6_0
--->  Activating intltool @0.40.6_0
--->  Cleaning intltool
--->  Fetching zlib
--->  Verifying checksum(s) for zlib
--->  Extracting zlib
--->  Applying patches to zlib
--->  Configuring zlib
--->  Building zlib
--->  Staging zlib into destroot
--->  Deactivating zlib @1.2.3_1
--->  Installing zlib @1.2.3_2
--->  Activating zlib @1.2.3_2
--->  Cleaning zlib
--->  Fetching libxml2
--->  Attempting to fetch libxml2-2.7.3.tar.gz from http://distfiles.macports.org/libxml2
--->  Verifying checksum(s) for libxml2
--->  Extracting libxml2
--->  Configuring libxml2
--->  Building libxml2
--->  Staging libxml2 into destroot
--->  Deactivating libxml2 @2.6.28_1
--->  Installing libxml2 @2.7.3_0
--->  Activating libxml2 @2.7.3_0
--->  Cleaning libxml2
--->  Fetching xorg-renderproto
--->  Attempting to fetch renderproto-0.9.3.tar.bz2 from http://www.x.org/pub/individual/proto/
--->  Verifying checksum(s) for xorg-renderproto
--->  Extracting xorg-renderproto
--->  Configuring xorg-renderproto
--->  Building xorg-renderproto
--->  Staging xorg-renderproto into destroot
--->  Installing xorg-renderproto @0.9.3_0
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching freetype
--->  Attempting to fetch freetype-2.3.9.tar.bz2 from http://distfiles.macports.org/freetype
--->  Attempting to fetch freetype-doc-2.3.9.tar.bz2 from http://distfiles.macports.org/freetype
--->  Verifying checksum(s) for freetype
--->  Extracting freetype
--->  Applying patches to freetype
--->  Configuring freetype
--->  Building freetype
--->  Staging freetype into destroot
--->  Deactivating freetype @2.3.5_0
--->  Installing freetype @2.3.9_0+macosx
--->  Activating freetype @2.3.9_0+macosx
--->  Cleaning freetype
--->  Fetching fontconfig
--->  Attempting to fetch fontconfig-2.6.0.tar.gz from http://distfiles.macports.org/fontconfig
--->  Verifying checksum(s) for fontconfig
--->  Extracting fontconfig
--->  Applying patches to fontconfig
--->  Configuring fontconfig
--->  Building fontconfig
--->  Staging fontconfig into destroot
--->  Deactivating fontconfig @2.4.2_0+macosx
--->  Installing fontconfig @2.6.0_2+macosx
--->  Activating fontconfig @2.6.0_2+macosx
--->  Cleaning fontconfig
--->  Fetching Xft2
--->  Attempting to fetch libXft-2.1.13.tar.bz2 from http://distfiles.macports.org/Xft2
--->  Verifying checksum(s) for Xft2
--->  Extracting Xft2
--->  Configuring Xft2
--->  Building Xft2
--->  Staging Xft2 into destroot
--->  Deactivating Xft2 @2.1.7_0
--->  Installing Xft2 @2.1.13_1
--->  Activating Xft2 @2.1.13_1
--->  Cleaning Xft2
--->  Fetching glib2
--->  Attempting to fetch glib-2.20.4.tar.bz2 from http://distfiles.macports.org/glib2
--->  Verifying checksum(s) for glib2
--->  Extracting glib2
--->  Applying patches to glib2
--->  Configuring glib2
--->  Building glib2
--->  Staging glib2 into destroot
--->  Deactivating glib2 @2.12.12_0
--->  Installing glib2 @2.20.4_0
--->  Activating glib2 @2.20.4_0
--->  Cleaning glib2
--->  Fetching atk
--->  Attempting to fetch atk-1.26.0.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/atk/1.26/
--->  Verifying checksum(s) for atk
--->  Extracting atk
--->  Configuring atk
--->  Building atk
--->  Staging atk into destroot
--->  Deactivating atk @1.18.0_0
--->  Installing atk @1.26.0_1
--->  Activating atk @1.26.0_1
--->  Cleaning atk
--->  Fetching bison
--->  Attempting to fetch bison-2.4.1.tar.bz2 from http://distfiles.macports.org/bison
--->  Verifying checksum(s) for bison
--->  Extracting bison
--->  Configuring bison
--->  Building bison
--->  Staging bison into destroot
--->  Deactivating bison @2.3_0
--->  Installing bison @2.4.1_0
--->  Activating bison @2.4.1_0
--->  Cleaning bison
--->  Fetching libpixman
--->  Attempting to fetch pixman-0.14.0.tar.bz2 from http://distfiles.macports.org/libpixman
--->  Verifying checksum(s) for libpixman
--->  Extracting libpixman
--->  Configuring libpixman
--->  Building libpixman
--->  Staging libpixman into destroot
--->  Installing libpixman @0.14.0_0
--->  Activating libpixman @0.14.0_0
--->  Cleaning libpixman
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching libpng
--->  Attempting to fetch libpng-1.2.37.tar.bz2 from http://distfiles.macports.org/libpng
--->  Verifying checksum(s) for libpng
--->  Extracting libpng
--->  Configuring libpng
--->  Building libpng
--->  Staging libpng into destroot
--->  Deactivating libpng @1.2.18_0+darwin_8
--->  Installing libpng @1.2.37_0
--->  Activating libpng @1.2.37_0
--->  Cleaning libpng
--->  Fetching cairo
--->  Attempting to fetch cairo-1.8.8.tar.gz from http://distfiles.macports.org/cairo
--->  Verifying checksum(s) for cairo
--->  Extracting cairo
--->  Configuring cairo
--->  Building cairo
--->  Staging cairo into destroot
--->  Deactivating cairo @1.4.10_0
--->  Installing cairo @1.8.8_0+macosx
--->  Activating cairo @1.8.8_0+macosx
--->  Cleaning cairo
--->  Fetching xorg-libice
--->  Attempting to fetch libICE-1.0.5.tar.bz2 from http://www.x.org/pub/individual/lib/
--->  Verifying checksum(s) for xorg-libice
--->  Extracting xorg-libice
--->  Configuring xorg-libice
--->  Building xorg-libice
--->  Staging xorg-libice into destroot
--->  Installing xorg-libice @1.0.5_0
--->  Activating xorg-libice @1.0.5_0
--->  Cleaning xorg-libice
--->  Fetching xorg-libsm
--->  Attempting to fetch libSM-1.1.0.tar.bz2 from http://distfiles.macports.org/xorg-libsm
--->  Verifying checksum(s) for xorg-libsm
--->  Extracting xorg-libsm
--->  Configuring xorg-libsm
--->  Building xorg-libsm
--->  Staging xorg-libsm into destroot
--->  Installing xorg-libsm @1.1.0_0
--->  Activating xorg-libsm @1.1.0_0
--->  Cleaning xorg-libsm
--->  Fetching xorg-libXt
--->  Attempting to fetch libXt-1.0.6.tar.bz2 from http://distfiles.macports.org/xorg-libXt
--->  Verifying checksum(s) for xorg-libXt
--->  Extracting xorg-libXt
--->  Configuring xorg-libXt
--->  Building xorg-libXt
--->  Staging xorg-libXt into destroot
--->  Installing xorg-libXt @1.0.6_0
--->  Activating xorg-libXt @1.0.6_0
--->  Cleaning xorg-libXt
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching ghostscript
--->  Attempting to fetch ghostscript-8.64.tar.gz from http://distfiles.macports.org/ghostscript
--->  Verifying checksum(s) for ghostscript
--->  Extracting ghostscript
--->  Applying patches to ghostscript
--->  Configuring ghostscript
--->  Building ghostscript
--->  Staging ghostscript into destroot
--->  Deactivating ghostscript @8.54_0
--->  Installing ghostscript @8.64_3
--->  Activating ghostscript @8.64_3
--->  Cleaning ghostscript
--->  Fetching icns-gimp
--->  Attempting to fetch icns-gimp-0.1.tar.gz from http://easynews.dl.sourceforge.net/gimp-mac-helper
--->  Verifying checksum(s) for icns-gimp
--->  Extracting icns-gimp
--->  Applying patches to icns-gimp
--->  Configuring icns-gimp
--->  Building icns-gimp
--->  Staging icns-gimp into destroot
--->  Installing icns-gimp @0.1_0
--->  Activating icns-gimp @0.1_0
--->  Cleaning icns-gimp
--->  Fetching openjpeg
--->  Attempting to fetch openjpeg_v1_3.tar.gz from http://distfiles.macports.org/openjpeg
--->  Verifying checksum(s) for openjpeg
--->  Extracting openjpeg
--->  Applying patches to openjpeg
--->  Configuring openjpeg
--->  Building openjpeg
--->  Staging openjpeg into destroot
--->  Installing openjpeg @1.3_3
--->  Activating openjpeg @1.3_3
--->  Cleaning openjpeg
--->  Fetching gimp-jp2
--->  Attempting to fetch jp2.tar.gz from http://distfiles.macports.org/gimp-jp2
--->  Verifying checksum(s) for gimp-jp2
--->  Extracting gimp-jp2
--->  Configuring gimp-jp2
--->  Building gimp-jp2
--->  Staging gimp-jp2 into destroot
--->  Installing gimp-jp2 @2.2.0_2
--->  Activating gimp-jp2 @2.2.0_2
--->  Cleaning gimp-jp2
--->  Fetching curl
--->  Attempting to fetch curl-7.19.5.tar.bz2 from http://distfiles.macports.org/curl
--->  Verifying checksum(s) for curl
--->  Extracting curl
--->  Configuring curl
--->  Building curl
--->  Staging curl into destroot
--->  Installing curl @7.19.5_0
--->  Activating curl @7.19.5_0
--->  Cleaning curl
--->  Fetching babl
--->  Attempting to fetch babl-0.0.22.tar.bz2 from http://distfiles.macports.org/babl
--->  Verifying checksum(s) for babl
--->  Extracting babl
--->  Applying patches to babl
--->  Configuring babl
--->  Building babl
--->  Staging babl into destroot
--->  Installing babl @0.0.22_0
--->  Activating babl @0.0.22_0
--->  Cleaning babl
--->  Fetching XviD
--->  Attempting to fetch xvidcore-1.2.2.tar.bz2 from http://distfiles.macports.org/XviD
--->  Verifying checksum(s) for XviD
--->  Extracting XviD
--->  Applying patches to XviD
--->  Configuring XviD
--->  Building XviD
--->  Staging XviD into destroot
--->  Installing XviD @1.2.2_0
--->  Activating XviD @1.2.2_0
--->  Cleaning XviD
--->  Fetching cppunit
--->  Attempting to fetch cppunit-1.12.1.tar.gz from http://distfiles.macports.org/cppunit
--->  Verifying checksum(s) for cppunit
--->  Extracting cppunit
--->  Configuring cppunit
--->  Building cppunit
--->  Staging cppunit into destroot
--->  Installing cppunit @1.12.1_0
--->  Activating cppunit @1.12.1_0
--->  Cleaning cppunit
--->  Fetching dirac
--->  Attempting to fetch dirac-1.0.2.tar.gz from http://distfiles.macports.org/dirac
--->  Verifying checksum(s) for dirac
--->  Extracting dirac
--->  Applying patches to dirac
--->  Configuring dirac
--->  Building dirac
--->  Staging dirac into destroot
--->  Installing dirac @1.0.2_0
--->  Activating dirac @1.0.2_0
--->  Cleaning dirac
--->  Fetching libmp4v2
--->  Attempting to fetch libmp4v2-1.5.0.1.tar.bz2 from http://arn.se.distfiles.macports.org/libmp4v2
--->  Verifying checksum(s) for libmp4v2
--->  Extracting libmp4v2
--->  Configuring libmp4v2
--->  Building libmp4v2
--->  Staging libmp4v2 into destroot
--->  Installing libmp4v2 @1.5.0.1_0
--->  Activating libmp4v2 @1.5.0.1_0
--->  Cleaning libmp4v2
--->  Fetching faac
--->  Attempting to fetch faac-1.28.tar.gz from http://distfiles.macports.org/faac
--->  Verifying checksum(s) for faac
--->  Extracting faac
--->  Configuring faac
--->  Building faac
--->  Staging faac into destroot
--->  Installing faac @1.28_1
--->  Activating faac @1.28_1
--->  Cleaning faac
--->  Fetching faad2
--->  Attempting to fetch faad2-2.6.1.tar.gz from http://distfiles.macports.org/faad2
--->  Verifying checksum(s) for faad2
--->  Extracting faad2
--->  Applying patches to faad2
--->  Configuring faad2
--->  Building faad2
--->  Staging faad2 into destroot
--->  Installing faad2 @2.6.1_1
--->  Activating faad2 @2.6.1_1
--->  Cleaning faad2
--->  Fetching gmake
--->  Attempting to fetch make-3.81.tar.bz2 from http://distfiles.macports.org/gmake
--->  Verifying checksum(s) for gmake
--->  Extracting gmake
--->  Configuring gmake
--->  Building gmake
--->  Staging gmake into destroot
--->  Installing gmake @3.81_0
--->  Activating gmake @3.81_0
--->  Cleaning gmake
--->  Fetching lame
--->  Attempting to fetch lame-398-2.tar.gz from http://distfiles.macports.org/lame
--->  Verifying checksum(s) for lame
--->  Extracting lame
--->  Configuring lame
--->  Building lame
--->  Staging lame into destroot
--->  Installing lame @3.98.2_0
--->  Activating lame @3.98.2_0
--->  Cleaning lame
--->  Fetching libtheora
--->  Attempting to fetch libtheora-1.0.tar.bz2 from http://arn.se.distfiles.macports.org/libtheora
--->  Verifying checksum(s) for libtheora
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
Error: The following dependencies failed to build: gimp2 gegl ffmpeg libtheora schroedinger liboil x264 graphviz gd2 xpm urw-fonts xorg-libXaw xorg-libXmu libopenraw boost boost-jam librsvg libcroco libgsf gnome-vfs desktop-file-utils gconf policykit gnome-mime-data shared-mime-info libbonobo libspiro lua openexr ilmbase w3m boehmgc libgnomeui gnome-keyring libgcrypt libgpg-error libtasn1 libbonoboui libgnome poppler poppler-data py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-gobject liblqr
--->  Fetching liblqr
--->  Attempting to fetch liblqr-1-0.4.1.tar.bz2 from http://distfiles.macports.org/liblqr
--->  Verifying checksum(s) for liblqr
--->  Extracting liblqr
--->  Applying patches to liblqr
--->  Configuring liblqr
--->  Building liblqr
--->  Staging liblqr into destroot
--->  Installing liblqr @1-0.4.1_0
--->  Activating liblqr @1-0.4.1_0
--->  Cleaning liblqr
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
Error: The following dependencies failed to build: gegl ffmpeg libtheora schroedinger liboil x264 graphviz gd2 xpm urw-fonts xorg-libXaw xorg-libXmu libopenraw boost boost-jam librsvg libcroco libgsf gnome-vfs desktop-file-utils gconf policykit gnome-mime-data shared-mime-info libbonobo libspiro lua openexr ilmbase w3m boehmgc libgnomeui gnome-keyring libgcrypt libgpg-error libtasn1 libbonoboui libgnome poppler poppler-data py25-gtk py25-cairo py25-numpy fftw-3 py25-nose py25-setuptools py25-gobject
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
Error: The following dependencies failed to build: ffmpeg libtheora schroedinger liboil x264 graphviz gd2 xpm urw-fonts xorg-libXaw xorg-libXmu libopenraw boost boost-jam librsvg libcroco libgsf gnome-vfs desktop-file-utils gconf policykit gnome-mime-data shared-mime-info libbonobo libspiro lua openexr ilmbase w3m boehmgc
--->  Fetching boehmgc
--->  Attempting to fetch gc-7.1.tar.gz from http://distfiles.macports.org/boehmgc
--->  Verifying checksum(s) for boehmgc
--->  Extracting boehmgc
--->  Configuring boehmgc
--->  Building boehmgc
--->  Staging boehmgc into destroot
--->  Installing boehmgc @7.1_0
--->  Activating boehmgc @7.1_0
--->  Cleaning boehmgc
--->  Fetching w3m
--->  Attempting to fetch w3m-0.5.2.tar.gz from http://distfiles.macports.org/w3m
--->  Verifying checksum(s) for w3m
--->  Extracting w3m
--->  Applying patches to w3m
--->  Configuring w3m
--->  Building w3m
--->  Staging w3m into destroot
--->  Installing w3m @0.5.2_1
--->  Activating w3m @0.5.2_1
--->  Cleaning w3m
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching jpeg
--->  Attempting to fetch droppatch.tar.gz from http://distfiles.macports.org/jpeg
--->  Verifying checksum(s) for jpeg
--->  Extracting jpeg
--->  Applying patches to jpeg
--->  Configuring jpeg
--->  Building jpeg
--->  Staging jpeg into destroot
--->  Deactivating jpeg @6b_1
--->  Installing jpeg @6b_3
--->  Activating jpeg @6b_3
--->  Cleaning jpeg
--->  Fetching tiff
--->  Verifying checksum(s) for tiff
--->  Extracting tiff
--->  Applying patches to tiff
--->  Configuring tiff
--->  Building tiff
--->  Staging tiff into destroot
--->  Deactivating tiff @3.8.2_0+darwin_8
--->  Installing tiff @3.8.2_3+macosx
--->  Activating tiff @3.8.2_3+macosx
--->  Cleaning tiff
--->  Fetching jasper
--->  Attempting to fetch jasper-1.900.1.zip from http://arn.se.distfiles.macports.org/jasper
--->  Verifying checksum(s) for jasper
--->  Extracting jasper
--->  Applying patches to jasper
--->  Configuring jasper
--->  Building jasper
--->  Staging jasper into destroot
--->  Installing jasper @1.900.1_4
--->  Activating jasper @1.900.1_4
--->  Cleaning jasper
--->  Fetching pango
--->  Attempting to fetch pango-1.24.4.tar.bz2 from http://distfiles.macports.org/pango
--->  Verifying checksum(s) for pango
--->  Extracting pango
--->  Applying patches to pango
--->  Configuring pango
--->  Building pango
--->  Staging pango into destroot
--->  Deactivating pango @1.16.4_0
--->  Installing pango @1.24.4_0+macosx
--->  Activating pango @1.24.4_0+macosx
--->  Cleaning pango
--->  Fetching xorg-libXi
--->  Attempting to fetch libXi-1.2.1.tar.bz2 from http://distfiles.macports.org/xorg-libXi
--->  Verifying checksum(s) for xorg-libXi
--->  Extracting xorg-libXi
--->  Configuring xorg-libXi
--->  Building xorg-libXi
--->  Staging xorg-libXi into destroot
--->  Installing xorg-libXi @1.2.1_0
--->  Activating xorg-libXi @1.2.1_0
--->  Cleaning xorg-libXi
--->  Fetching xorg-randrproto
--->  Attempting to fetch randrproto-1.3.0.tar.bz2 from http://www.x.org/pub/individual/proto/
--->  Verifying checksum(s) for xorg-randrproto
--->  Extracting xorg-randrproto
--->  Configuring xorg-randrproto
--->  Building xorg-randrproto
--->  Staging xorg-randrproto into destroot
--->  Installing xorg-randrproto @1.3.0_0
--->  Activating xorg-randrproto @1.3.0_0
--->  Cleaning xorg-randrproto
--->  Fetching xorg-libXrandr
--->  Attempting to fetch libXrandr-1.3.0.tar.bz2 from http://distfiles.macports.org/xorg-libXrandr
--->  Verifying checksum(s) for xorg-libXrandr
--->  Extracting xorg-libXrandr
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Fetching xorg-fixesproto
--->  Attempting to fetch fixesproto-4.0.tar.bz2 from http://distfiles.macports.org/xorg-fixesproto
--->  Verifying checksum(s) for xorg-fixesproto
--->  Extracting xorg-fixesproto
--->  Configuring xorg-fixesproto
--->  Building xorg-fixesproto
--->  Staging xorg-fixesproto into destroot
--->  Installing xorg-fixesproto @4.0_0
--->  Activating xorg-fixesproto @4.0_0
--->  Cleaning xorg-fixesproto
--->  Fetching xorg-libXfixes
--->  Attempting to fetch libXfixes-4.0.3.tar.bz2 from http://distfiles.macports.org/xorg-libXfixes
--->  Verifying checksum(s) for xorg-libXfixes
--->  Extracting xorg-libXfixes
--->  Configuring xorg-libXfixes
--->  Building xorg-libXfixes
--->  Staging xorg-libXfixes into destroot
--->  Installing xorg-libXfixes @4.0.3_0
--->  Activating xorg-libXfixes @4.0.3_0
--->  Cleaning xorg-libXfixes
--->  Fetching xorg-libXcursor
--->  Attempting to fetch libXcursor-1.1.9.tar.bz2 from http://distfiles.macports.org/xorg-libXcursor
--->  Verifying checksum(s) for xorg-libXcursor
--->  Extracting xorg-libXcursor
--->  Configuring xorg-libXcursor
--->  Building xorg-libXcursor
--->  Staging xorg-libXcursor into destroot
--->  Installing xorg-libXcursor @1.1.9_0
--->  Activating xorg-libXcursor @1.1.9_0
--->  Cleaning xorg-libXcursor
--->  Fetching xorg-xineramaproto
--->  Attempting to fetch xineramaproto-1.1.2.tar.bz2 from http://distfiles.macports.org/xorg-xineramaproto
--->  Verifying checksum(s) for xorg-xineramaproto
--->  Extracting xorg-xineramaproto
--->  Configuring xorg-xineramaproto
--->  Building xorg-xineramaproto
--->  Staging xorg-xineramaproto into destroot
--->  Installing xorg-xineramaproto @1.1.2_0
--->  Activating xorg-xineramaproto @1.1.2_0
--->  Cleaning xorg-xineramaproto
--->  Fetching xorg-libXinerama
--->  Attempting to fetch libXinerama-1.0.3.tar.bz2 from http://distfiles.macports.org/xorg-libXinerama
--->  Verifying checksum(s) for xorg-libXinerama
--->  Extracting xorg-libXinerama
--->  Configuring xorg-libXinerama
--->  Building xorg-libXinerama
--->  Staging xorg-libXinerama into destroot
--->  Installing xorg-libXinerama @1.0.3_0
--->  Activating xorg-libXinerama @1.0.3_0
--->  Cleaning xorg-libXinerama
--->  Fetching xorg-damageproto
--->  Attempting to fetch damageproto-1.1.0.tar.bz2 from http://distfiles.macports.org/xorg-damageproto
--->  Verifying checksum(s) for xorg-damageproto
--->  Extracting xorg-damageproto
--->  Configuring xorg-damageproto
--->  Building xorg-damageproto
--->  Staging xorg-damageproto into destroot
--->  Installing xorg-damageproto @1.1.0_0
--->  Activating xorg-damageproto @1.1.0_0
--->  Cleaning xorg-damageproto
--->  Fetching xorg-libXdamage
--->  Attempting to fetch libXdamage-1.1.1.tar.bz2 from http://distfiles.macports.org/xorg-libXdamage
--->  Verifying checksum(s) for xorg-libXdamage
--->  Extracting xorg-libXdamage
--->  Configuring xorg-libXdamage
--->  Building xorg-libXdamage
--->  Staging xorg-libXdamage into destroot
--->  Installing xorg-libXdamage @1.1.1_0
--->  Activating xorg-libXdamage @1.1.1_0
--->  Cleaning xorg-libXdamage
--->  Fetching xorg-compositeproto
--->  Attempting to fetch compositeproto-0.4.tar.bz2 from http://distfiles.macports.org/xorg-compositeproto
--->  Verifying checksum(s) for xorg-compositeproto
--->  Extracting xorg-compositeproto
--->  Configuring xorg-compositeproto
--->  Building xorg-compositeproto
--->  Staging xorg-compositeproto into destroot
--->  Installing xorg-compositeproto @0.4_0
--->  Activating xorg-compositeproto @0.4_0
--->  Cleaning xorg-compositeproto
--->  Fetching xorg-libXcomposite
--->  Attempting to fetch libXcomposite-0.4.0.tar.bz2 from http://distfiles.macports.org/xorg-libXcomposite
--->  Verifying checksum(s) for xorg-libXcomposite
--->  Extracting xorg-libXcomposite
--->  Configuring xorg-libXcomposite
--->  Building xorg-libXcomposite
--->  Staging xorg-libXcomposite into destroot
--->  Installing xorg-libXcomposite @0.4.0_0
--->  Activating xorg-libXcomposite @0.4.0_0
--->  Cleaning xorg-libXcomposite
--->  Fetching shared-mime-info
--->  Attempting to fetch shared-mime-info-0.60.tar.bz2 from http://distfiles.macports.org/shared-mime-info
--->  Verifying checksum(s) for shared-mime-info
--->  Extracting shared-mime-info
--->  Configuring shared-mime-info
--->  Building shared-mime-info
--->  Staging shared-mime-info into destroot
--->  Installing shared-mime-info @0.60_0
--->  Activating shared-mime-info @0.60_0
--->  Cleaning shared-mime-info
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching lua
--->  Attempting to fetch lua-5.1.4.tar.gz from http://distfiles.macports.org/lua
--->  Verifying checksum(s) for lua
--->  Extracting lua
--->  Configuring lua
--->  Building lua
--->  Staging lua into destroot
--->  Installing lua @5.1.4_0
--->  Activating lua @5.1.4_0
--->  Cleaning lua
--->  Fetching ilmbase
--->  Attempting to fetch ilmbase-1.0.1.tar.gz from http://distfiles.macports.org/ilmbase
--->  Verifying checksum(s) for ilmbase
--->  Extracting ilmbase
--->  Configuring ilmbase
--->  Building ilmbase
--->  Staging ilmbase into destroot
--->  Installing ilmbase @1.0.1_2
--->  Activating ilmbase @1.0.1_2
--->  Cleaning ilmbase
--->  Fetching openexr
--->  Attempting to fetch openexr-1.6.1.tar.gz from http://distfiles.macports.org/openexr
--->  Verifying checksum(s) for openexr
--->  Extracting openexr
--->  Configuring openexr
--->  Building openexr
--->  Staging openexr into destroot
--->  Installing openexr @1.6.1_1
--->  Activating openexr @1.6.1_1
--->  Cleaning openexr
--->  Fetching boost-jam
--->  Attempting to fetch boost-jam-3.1.17.tgz from http://downloads.sourceforge.net/boost
--->  Verifying checksum(s) for boost-jam
--->  Extracting boost-jam
--->  Applying patches to boost-jam
--->  Configuring boost-jam
--->  Building boost-jam
--->  Staging boost-jam into destroot
--->  Installing boost-jam @3.1.17_0
--->  Activating boost-jam @3.1.17_0
--->  Cleaning boost-jam
--->  Fetching boost
--->  Attempting to fetch boost_1_39_0.tar.bz2 from http://distfiles.macports.org/boost
--->  Verifying checksum(s) for boost
--->  Extracting boost
--->  Applying patches to boost
--->  Configuring boost
--->  Building boost
--->  Staging boost into destroot
--->  Installing boost @1.39.0_2
--->  Activating boost @1.39.0_2
--->  Cleaning boost
--->  Fetching libopenraw
--->  Attempting to fetch libopenraw-0.0.8.tar.gz from http://libopenraw.freedesktop.org/download/
--->  Verifying checksum(s) for libopenraw
--->  Extracting libopenraw
--->  Applying patches to libopenraw
--->  Configuring libopenraw
--->  Building libopenraw
--->  Staging libopenraw into destroot
--->  Installing libopenraw @0.0.8_0
--->  Activating libopenraw @0.0.8_0
--->  Cleaning libopenraw
--->  Fetching libcroco
--->  Attempting to fetch libcroco-0.6.2.tar.bz2 from http://distfiles.macports.org/libcroco
--->  Verifying checksum(s) for libcroco
--->  Extracting libcroco
--->  Configuring libcroco
--->  Building libcroco
--->  Staging libcroco into destroot
--->  Installing libcroco @0.6.2_0
--->  Activating libcroco @0.6.2_0
--->  Cleaning libcroco
--->  Fetching desktop-file-utils
--->  Attempting to fetch desktop-file-utils-0.15.tar.gz from http://distfiles.macports.org/desktop-file-utils
--->  Verifying checksum(s) for desktop-file-utils
--->  Extracting desktop-file-utils
--->  Configuring desktop-file-utils
--->  Building desktop-file-utils
--->  Staging desktop-file-utils into destroot
--->  Installing desktop-file-utils @0.15_1
--->  Activating desktop-file-utils @0.15_1
--->  Cleaning desktop-file-utils
--->  Configuring policykit
--->  Building policykit
--->  Staging policykit into destroot
--->  Installing policykit @0.9_0
--->  Activating policykit @0.9_0
--->  Cleaning policykit
--->  Fetching gconf
--->  Attempting to fetch GConf-2.26.2.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/GConf/2.26/
--->  Verifying checksum(s) for gconf
--->  Extracting gconf
--->  Configuring gconf
--->  Building gconf
--->  Staging gconf into destroot
--->  Installing gconf @2.26.2_0
--->  Activating gconf @2.26.2_0
--->  Cleaning gconf
--->  Fetching gnome-mime-data
--->  Attempting to fetch gnome-mime-data-2.18.0.tar.bz2 from http://distfiles.macports.org/gnome-mime-data
--->  Verifying checksum(s) for gnome-mime-data
--->  Extracting gnome-mime-data
--->  Configuring gnome-mime-data
--->  Building gnome-mime-data
--->  Staging gnome-mime-data into destroot
--->  Installing gnome-mime-data @2.18.0_3
--->  Activating gnome-mime-data @2.18.0_3
--->  Cleaning gnome-mime-data
--->  Fetching gnome-vfs
--->  Attempting to fetch gnome-vfs-2.24.1.tar.bz2 from http://distfiles.macports.org/gnome-vfs
--->  Verifying checksum(s) for gnome-vfs
--->  Extracting gnome-vfs
--->  Applying patches to gnome-vfs
--->  Configuring gnome-vfs
--->  Building gnome-vfs
--->  Staging gnome-vfs into destroot
--->  Installing gnome-vfs @2.24.1_0
--->  Activating gnome-vfs @2.24.1_0
--->  Cleaning gnome-vfs
--->  Fetching libbonobo
--->  Attempting to fetch libbonobo-2.24.1.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libbonobo/2.24/
--->  Verifying checksum(s) for libbonobo
--->  Extracting libbonobo
--->  Configuring libbonobo
--->  Building libbonobo
--->  Staging libbonobo into destroot
--->  Installing libbonobo @2.24.1_0
--->  Activating libbonobo @2.24.1_0
--->  Cleaning libbonobo
--->  Fetching libgsf
--->  Attempting to fetch libgsf-1.14.15.tar.bz2 from http://distfiles.macports.org/libgsf
--->  Verifying checksum(s) for libgsf
--->  Extracting libgsf
--->  Configuring libgsf
--->  Building libgsf
--->  Staging libgsf into destroot
--->  Installing libgsf @1.14.15_0
--->  Activating libgsf @1.14.15_0
--->  Cleaning libgsf
--->  Fetching librsvg
--->  Attempting to fetch librsvg-2.26.0.tar.bz2 from http://distfiles.macports.org/librsvg
--->  Verifying checksum(s) for librsvg
--->  Extracting librsvg
--->  Configuring librsvg
--->  Building librsvg
--->  Staging librsvg into destroot
--->  Installing librsvg @2.26.0_0
--->  Activating librsvg @2.26.0_0
--->  Cleaning librsvg
--->  Fetching popt
--->  Attempting to fetch popt-1.15.tar.gz from http://distfiles.macports.org/popt
--->  Verifying checksum(s) for popt
--->  Extracting popt
--->  Configuring popt
--->  Building popt
--->  Staging popt into destroot
--->  Deactivating popt @1.11_1
--->  Installing popt @1.15_0
--->  Activating popt @1.15_0
--->  Cleaning popt
--->  Fetching libart_lgpl
--->  Attempting to fetch libart_lgpl-2.3.20.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libart_lgpl/2.3/
--->  Verifying checksum(s) for libart_lgpl
--->  Extracting libart_lgpl
--->  Applying patches to libart_lgpl
--->  Configuring libart_lgpl
--->  Building libart_lgpl
--->  Staging libart_lgpl into destroot
--->  Deactivating libart_lgpl @2.3.19_1
--->  Installing libart_lgpl @2.3.20_0
--->  Activating libart_lgpl @2.3.20_0
--->  Cleaning libart_lgpl
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching xpm
--->  Attempting to fetch libXpm-3.5.7.tar.bz2 from http://distfiles.macports.org/xpm
--->  Verifying checksum(s) for xpm
--->  Extracting xpm
--->  Configuring xpm
--->  Building xpm
--->  Staging xpm into destroot
--->  Installing xpm @3.5.7_0
--->  Activating xpm @3.5.7_0
--->  Cleaning xpm
--->  Fetching gd2
--->  Attempting to fetch gd-2.0.35.tar.bz2 from http://distfiles.macports.org/gd2
--->  Verifying checksum(s) for gd2
--->  Extracting gd2
--->  Applying patches to gd2
--->  Configuring gd2
--->  Building gd2
--->  Staging gd2 into destroot
--->  Installing gd2 @2.0.35_5
--->  Activating gd2 @2.0.35_5
--->  Cleaning gd2
--->  Fetching urw-fonts
--->  Attempting to fetch urw-fonts-1.0.7pre44.tar.bz2 from http://distfiles.macports.org/urw-fonts
--->  Verifying checksum(s) for urw-fonts
--->  Extracting urw-fonts
--->  Configuring urw-fonts
--->  Building urw-fonts
--->  Staging urw-fonts into destroot
--->  Installing urw-fonts @1.0.7pre44_0
--->  Activating urw-fonts @1.0.7pre44_0
--->  Cleaning urw-fonts
--->  Fetching xorg-libXmu
--->  Attempting to fetch libXmu-1.0.4.tar.bz2 from http://distfiles.macports.org/xorg-libXmu
--->  Verifying checksum(s) for xorg-libXmu
--->  Extracting xorg-libXmu
--->  Configuring xorg-libXmu
--->  Building xorg-libXmu
--->  Staging xorg-libXmu into destroot
--->  Installing xorg-libXmu @1.0.4_0
--->  Activating xorg-libXmu @1.0.4_0
--->  Cleaning xorg-libXmu
--->  Fetching xorg-libXaw
--->  Attempting to fetch libXaw-1.0.6.tar.bz2 from http://distfiles.macports.org/xorg-libXaw
--->  Verifying checksum(s) for xorg-libXaw
--->  Extracting xorg-libXaw
--->  Configuring xorg-libXaw
--->  Building xorg-libXaw
--->  Staging xorg-libXaw into destroot
--->  Installing xorg-libXaw @1.0.6_0
--->  Activating xorg-libXaw @1.0.6_0
--->  Cleaning xorg-libXaw
--->  Fetching graphviz
--->  Attempting to fetch graphviz-2.24.0.tar.gz from http://www.graphviz.org/pub/graphviz/stable/SOURCES/
--->  Verifying checksum(s) for graphviz
--->  Extracting graphviz
--->  Configuring graphviz
--->  Building graphviz
--->  Staging graphviz into destroot
--->  Installing graphviz @2.24.0_0+macosx
--->  Activating graphviz @2.24.0_0+macosx
--->  Cleaning graphviz
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
Error: The following dependencies failed to build: libtheora schroedinger liboil x264
--->  Fetching libogg
--->  Verifying checksum(s) for libogg
--->  Extracting libogg
--->  Configuring libogg
--->  Building libogg
--->  Staging libogg into destroot
--->  Deactivating libogg @1.1.3_0
--->  Installing libogg @1.1.3_2
--->  Activating libogg @1.1.3_2
--->  Cleaning libogg
--->  Fetching libvorbis
--->  Attempting to fetch libvorbis-1.2.2.tar.gz from http://downloads.xiph.org/releases/vorbis/
--->  Verifying checksum(s) for libvorbis
--->  Extracting libvorbis
--->  Configuring libvorbis
--->  Building libvorbis
--->  Staging libvorbis into destroot
--->  Deactivating libvorbis @1.1.2_0
--->  Installing libvorbis @1.2.2_0
--->  Activating libvorbis @1.2.2_0
--->  Cleaning libvorbis
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
--->  Fetching liboil
--->  Attempting to fetch liboil-0.3.16.tar.gz from http://distfiles.macports.org/liboil
--->  Verifying checksum(s) for liboil
--->  Extracting liboil
--->  Applying patches to liboil
--->  Configuring liboil
--->  Building liboil
--->  Staging liboil into destroot
--->  Installing liboil @0.3.16_0
--->  Activating liboil @0.3.16_0
--->  Cleaning liboil
--->  Fetching schroedinger
--->  Attempting to fetch schroedinger-1.0.7.tar.gz from http://diracvideo.org/download/schroedinger
--->  Verifying checksum(s) for schroedinger
--->  Extracting schroedinger
--->  Configuring schroedinger
--->  Building schroedinger
--->  Staging schroedinger into destroot
--->  Installing schroedinger @1.0.7_0
--->  Activating schroedinger @1.0.7_0
--->  Cleaning schroedinger
--->  Fetching x264
--->  Attempting to fetch x264-snapshot-20090408-2245.tar.bz2 from http://distfiles.macports.org/x264
--->  Verifying checksum(s) for x264
--->  Extracting x264
--->  Configuring x264
--->  Building x264
--->  Staging x264 into destroot
--->  Installing x264 @20090408_1
--->  Activating x264 @20090408_1
--->  Cleaning x264
--->  Fetching libspiro
--->  Attempting to fetch libspiro_src-20071029.tar.bz2 from http://downloads.sourceforge.net/libspiro
--->  Verifying checksum(s) for libspiro
--->  Extracting libspiro
--->  Configuring libspiro
--->  Building libspiro
--->  Staging libspiro into destroot
--->  Installing libspiro @20071029_0
--->  Activating libspiro @20071029_0
--->  Cleaning libspiro
--->  Fetching libexif
--->  Attempting to fetch libexif-0.6.17.tar.bz2 from http://voxel.dl.sourceforge.net/libexif
--->  Verifying checksum(s) for libexif
--->  Extracting libexif
--->  Configuring libexif
--->  Building libexif
--->  Staging libexif into destroot
--->  Deactivating libexif @0.6.16_0
--->  Installing libexif @0.6.17_0
--->  Activating libexif @0.6.17_0
--->  Cleaning libexif
--->  Fetching libgpg-error
--->  Attempting to fetch libgpg-error-1.7.tar.bz2 from http://distfiles.macports.org/libgpg-error
--->  Verifying checksum(s) for libgpg-error
--->  Extracting libgpg-error
--->  Applying patches to libgpg-error
--->  Configuring libgpg-error
--->  Building libgpg-error
--->  Staging libgpg-error into destroot
--->  Installing libgpg-error @1.7_0
--->  Activating libgpg-error @1.7_0
--->  Cleaning libgpg-error
--->  Fetching libgcrypt
--->  Attempting to fetch libgcrypt-1.4.4.tar.bz2 from http://distfiles.macports.org/libgcrypt
--->  Verifying checksum(s) for libgcrypt
--->  Extracting libgcrypt
--->  Configuring libgcrypt
--->  Building libgcrypt
--->  Staging libgcrypt into destroot
--->  Installing libgcrypt @1.4.4_0
--->  Activating libgcrypt @1.4.4_0
--->  Cleaning libgcrypt
--->  Fetching libtasn1
--->  Attempting to fetch libtasn1-1.7.tar.gz from http://distfiles.macports.org/libtasn1
--->  Verifying checksum(s) for libtasn1
--->  Extracting libtasn1
--->  Configuring libtasn1
--->  Building libtasn1
--->  Staging libtasn1 into destroot
--->  Installing libtasn1 @1.7_0
--->  Activating libtasn1 @1.7_0
--->  Cleaning libtasn1
--->  Fetching gnome-keyring
--->  Attempting to fetch gnome-keyring-2.26.3.tar.bz2 from http://distfiles.macports.org/gnome-keyring
--->  Verifying checksum(s) for gnome-keyring
--->  Extracting gnome-keyring
--->  Configuring gnome-keyring
--->  Building gnome-keyring
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-keyring/work/gnome-keyring-2.26.3" && make all " returned error 2
Command output: /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.0  -Wall       -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes      -Wnested-externs -Wpointer-arith        -Wcast-align -Wsign-compare     -O2 -Wno-strict-aliasing -Wno-sign-compare  -L/opt/local/lib -o libegg-secure.la  egg-secure-memory.lo  
libtool: link: ar cru .libs/libegg-secure.a .libs/egg-secure-memory.o 
libtool: link: ranlib .libs/libegg-secure.a
libtool: link: ( cd ".libs" && rm -f "libegg-secure.la" && ln -s "../libegg-secure.la" "libegg-secure.la" )
/bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I..   -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include   -Wall       -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes      -Wnested-externs -Wpointer-arith        -Wcast-align -Wsign-compare     -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libegg_secure_entry_la-egg-secure-entry.lo -MD -MP -MF .deps/libegg_secure_entry_la-egg-secure-entry.Tpo -c -o libegg_secure_entry_la-egg-secure-entry.lo `test -f 'egg-secure-entry.c' || echo './'`egg-secure-entry.c
libtool: compile:  /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libegg_secure_entry_la-egg-secure-entry.lo -MD -MP -MF .deps/libegg_secure_entry_la-egg-secure-entry.Tpo -c egg-secure-entry.c  -fno-common -DPIC -o .libs/libegg_secure_entry_la-egg-secure-entry.o
mv -f .deps/libegg_secure_entry_la-egg-secure-entry.Tpo .deps/libegg_secure_entry_la-egg-secure-entry.Plo
/bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include   -Wall       -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes   -Wnested-externs -Wpointer-arith   -Wcast-align -Wsign-compare     -O2 -Wno-strict-aliasing -Wno-sign-compare  -L/opt/local/lib -o libegg-secure-entry.la  libegg_secure_entry_la-egg-secure-entry.lo  
libtool: link: ar cru .libs/libegg-secure-entry.a .libs/libegg_secure_entry_la-egg-secure-entry.o 
libtool: link: ranlib .libs/libegg-secure-entry.a
libtool: link: ( cd ".libs" && rm -f "libegg-secure-entry.la" && ln -s "../libegg-secure-entry.la" "libegg-secure-entry.la" )
Making all in gcr
echo "#include \"gcr-marshal.h\"" > gcr-marshal.c && \
/opt/local/bin/glib-genmarshal gcr-marshal.list --body --prefix=_gcr_marshal >> gcr-marshal.c
/opt/local/bin/glib-genmarshal gcr-marshal.list --header --prefix=_gcr_marshal > gcr-marshal.h
make  all-recursive
Making all in .
/bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include -I/opt/local/include    -I/opt/local/include -DPKCS11_MODULE_PATH=\""/opt/local/lib/gnome-keyring/gnome-keyring-pkcs11.so"\" -DGCR_API_SUBJECT_TO_CHANGE -DUIDIR=\""/opt/local/share/gcr/ui/"\" -Wall  -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes   -Wnested-externs -Wpointer-arith        -Wcast-align -Wsign-compare        -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libgcr_la-gcr-certificate.lo -MD -MP -MF .deps/libgcr_la-gcr-certificate.Tpo -c -o libgcr_la-gcr-certificate.lo `test -f 'gcr-certificate.c' || echo './'`gcr-certificate.c
libtool: compile:  /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -DPKCS11_MODULE_PATH=\"/opt/local/lib/gnome-keyring/gnome-keyring-pkcs11.so\" -DGCR_API_SUBJECT_TO_CHANGE -DUIDIR=\"/opt/local/share/gcr/ui/\" -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libgcr_la-gcr-certificate.lo -MD -MP -MF .deps/libgcr_la-gcr-certificate.Tpo -c gcr-certificate.c  -fno-common -DPIC -o .libs/libgcr_la-gcr-certificate.o
In file included from gcr.h:30,
                 from gcr-internal.h:4,
                 from gcr-certificate.c:24:
gcr-importer.h:82: error: parse error before 'GInputStream'
gcr-importer.h:87: error: parse error before 'GInputStream'
gcr-importer.h:93: error: parse error before 'GAsyncResult'
make[4]: *** [libgcr_la-gcr-certificate.lo] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Error: The following dependencies failed to build: gnome-keyring libbonoboui libgnome
--->  Fetching libgnome
--->  Attempting to fetch libgnome-2.26.0.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libgnome/2.26/
--->  Verifying checksum(s) for libgnome
--->  Extracting libgnome
--->  Configuring libgnome
--->  Building libgnome
--->  Staging libgnome into destroot
--->  Installing libgnome @2.26.0_0
--->  Activating libgnome @2.26.0_0
--->  Cleaning libgnome
--->  Fetching libbonoboui
--->  Attempting to fetch libbonoboui-2.24.1.tar.bz2 from http://distfiles.macports.org/libbonoboui
--->  Verifying checksum(s) for libbonoboui
--->  Extracting libbonoboui
--->  Configuring libbonoboui
--->  Building libbonoboui
--->  Staging libbonoboui into destroot
--->  Installing libbonoboui @2.24.1_0
--->  Activating libbonoboui @2.24.1_0
--->  Cleaning libbonoboui
--->  Fetching libglade2
--->  Attempting to fetch libglade-2.6.4.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libglade/2.6/
--->  Verifying checksum(s) for libglade2
--->  Extracting libglade2
--->  Configuring libglade2
--->  Building libglade2
--->  Staging libglade2 into destroot
--->  Deactivating libglade2 @2.6.1_1
--->  Installing libglade2 @2.6.4_0
--->  Activating libglade2 @2.6.4_0
--->  Cleaning libglade2
--->  Fetching libgnomecanvas
--->  Attempting to fetch libgnomecanvas-2.26.0.tar.bz2 from http://distfiles.macports.org/libgnomecanvas
--->  Verifying checksum(s) for libgnomecanvas
--->  Extracting libgnomecanvas
--->  Configuring libgnomecanvas
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnomecanvas/work/libgnomecanvas-2.26.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... no
checking for bindtextdomain in -lintl... yes
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /opt/local/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /opt/local/bin/msgfmt
checking for xgettext... (cached) /opt/local/bin/xgettext
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.18... yes
checking for LIBGNOMECANVAS... configure: error: Package requirements (  gtk+-2.0 >= 2.0.3   gail >= 1.9.0   libart-2.0 >= 2.3.8   pango >= 1.0.1   pangoft2 >= 1.0.1) were not met:

No package 'gail' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBGNOMECANVAS_CFLAGS
and LIBGNOMECANVAS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: Unable to upgrade port: 1
--->  Fetching p5-xml-namespacesupport
--->  Attempting to fetch XML-NamespaceSupport-1.10.tar.gz from http://distfiles.macports.org/perl5
--->  Verifying checksum(s) for p5-xml-namespacesupport
--->  Extracting p5-xml-namespacesupport
--->  Configuring p5-xml-namespacesupport
--->  Building p5-xml-namespacesupport
--->  Staging p5-xml-namespacesupport into destroot
--->  Deactivating p5-xml-namespacesupport @1.09_0
--->  Installing p5-xml-namespacesupport @1.10_0
--->  Activating p5-xml-namespacesupport @1.10_0
--->  Cleaning p5-xml-namespacesupport
--->  Fetching p5-xml-sax
--->  Attempting to fetch XML-SAX-0.96.tar.gz from http://distfiles.macports.org/perl5
--->  Verifying checksum(s) for p5-xml-sax
--->  Extracting p5-xml-sax
--->  Configuring p5-xml-sax
--->  Building p5-xml-sax
--->  Staging p5-xml-sax into destroot
--->  Installing p5-xml-sax @0.96_1
--->  Activating p5-xml-sax @0.96_1
--->  Cleaning p5-xml-sax
--->  Fetching p5-xml-simple
--->  Attempting to fetch XML-Simple-2.18.tar.gz from http://distfiles.macports.org/perl5
--->  Verifying checksum(s) for p5-xml-simple
--->  Extracting p5-xml-simple
--->  Configuring p5-xml-simple
--->  Building p5-xml-simple
--->  Staging p5-xml-simple into destroot
--->  Deactivating p5-xml-simple @2.16_0
--->  Installing p5-xml-simple @2.18_0
--->  Activating p5-xml-simple @2.18_0
--->  Cleaning p5-xml-simple
--->  Fetching icon-naming-utils
--->  Attempting to fetch icon-naming-utils-0.8.90.tar.gz from http://distfiles.macports.org/icon-naming-utils
--->  Verifying checksum(s) for icon-naming-utils
--->  Extracting icon-naming-utils
--->  Configuring icon-naming-utils
--->  Building icon-naming-utils
--->  Staging icon-naming-utils into destroot
--->  Deactivating icon-naming-utils @0.8.1_0
--->  Installing icon-naming-utils @0.8.90_0
--->  Activating icon-naming-utils @0.8.90_0
--->  Cleaning icon-naming-utils
--->  Fetching gnome-icon-theme
--->  Attempting to fetch gnome-icon-theme-2.26.0.tar.bz2 from http://distfiles.macports.org/gnome-icon-theme
--->  Verifying checksum(s) for gnome-icon-theme
--->  Extracting gnome-icon-theme
--->  Configuring gnome-icon-theme
--->  Building gnome-icon-theme
--->  Staging gnome-icon-theme into destroot
--->  Deactivating gnome-icon-theme @2.18.0_1
--->  Installing gnome-icon-theme @2.26.0_0
--->  Activating gnome-icon-theme @2.26.0_0
--->  Cleaning gnome-icon-theme
--->  Building gnome-keyring
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-keyring/work/gnome-keyring-2.26.3" && make all " returned error 2
Command output: make  all-recursive
Making all in .
make[2]: Nothing to be done for `all-am'.
Making all in gp11
make  all-recursive
Making all in .
make[4]: Nothing to be done for `all-am'.
Making all in egg
make  all-recursive
Making all in .
make[4]: Nothing to be done for `all-am'.
Making all in gcr
make  all-recursive
Making all in .
/bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include -I/opt/local/include    -I/opt/local/include -DPKCS11_MODULE_PATH=\""/opt/local/lib/gnome-keyring/gnome-keyring-pkcs11.so"\" -DGCR_API_SUBJECT_TO_CHANGE -DUIDIR=\""/opt/local/share/gcr/ui/"\" -Wall  -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes   -Wnested-externs -Wpointer-arith        -Wcast-align -Wsign-compare        -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libgcr_la-gcr-certificate.lo -MD -MP -MF .deps/libgcr_la-gcr-certificate.Tpo -c -o libgcr_la-gcr-certificate.lo `test -f 'gcr-certificate.c' || echo './'`gcr-certificate.c
libtool: compile:  /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -DPKCS11_MODULE_PATH=\"/opt/local/lib/gnome-keyring/gnome-keyring-pkcs11.so\" -DGCR_API_SUBJECT_TO_CHANGE -DUIDIR=\"/opt/local/share/gcr/ui/\" -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -O2 -Wno-strict-aliasing -Wno-sign-compare -MT libgcr_la-gcr-certificate.lo -MD -MP -MF .deps/libgcr_la-gcr-certificate.Tpo -c gcr-certificate.c  -fno-common -DPIC -o .libs/libgcr_la-gcr-certificate.o
In file included from gcr.h:30,
                 from gcr-internal.h:4,
                 from gcr-certificate.c:24:
gcr-importer.h:82: error: parse error before 'GInputStream'
gcr-importer.h:87: error: parse error before 'GInputStream'
gcr-importer.h:93: error: parse error before 'GAsyncResult'
make[4]: *** [libgcr_la-gcr-certificate.lo] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

--->  Fetching lcms
--->  Attempting to fetch lcms-1.18a.tar.gz from http://easynews.dl.sourceforge.net/lcms
--->  Verifying checksum(s) for lcms
--->  Extracting lcms
--->  Configuring lcms
--->  Building lcms
--->  Staging lcms into destroot
--->  Deactivating lcms @1.16_0
--->  Installing lcms @1.18a_0
--->  Activating lcms @1.18a_0
--->  Cleaning lcms
--->  Fetching libmng
--->  Attempting to fetch libmng-1.0.10.tar.gz from http://distfiles.macports.org/libmng
--->  Verifying checksum(s) for libmng
--->  Extracting libmng
--->  Configuring libmng
--->  Building libmng
--->  Staging libmng into destroot
--->  Deactivating libmng @1.0.9_0
--->  Installing libmng @1.0.10_0
--->  Activating libmng @1.0.10_0
--->  Cleaning libmng
--->  Fetching libwmf
--->  Verifying checksum(s) for libwmf
--->  Extracting libwmf
--->  Configuring libwmf
--->  Building libwmf
--->  Staging libwmf into destroot
--->  Deactivating libwmf @0.2.8.4_0
--->  Installing libwmf @0.2.8.4_2
--->  Activating libwmf @0.2.8.4_2
--->  Cleaning libwmf
--->  Fetching poppler-data
--->  Attempting to fetch poppler-data-0.2.1.tar.gz from http://distfiles.macports.org/poppler-data
--->  Verifying checksum(s) for poppler-data
--->  Extracting poppler-data
--->  Configuring poppler-data
--->  Building poppler-data
--->  Staging poppler-data into destroot
--->  Installing poppler-data @0.2.1_0
--->  Activating poppler-data @0.2.1_0
--->  Cleaning poppler-data
--->  Fetching poppler
--->  Attempting to fetch poppler-0.11.1.tar.gz from http://poppler.freedesktop.org/
--->  Verifying checksum(s) for poppler
--->  Extracting poppler
--->  Configuring poppler
--->  Building poppler
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/work/poppler-0.11.1" && make all " returned error 2
Command output: mv -f .deps/pdftoabw.Tpo .deps/pdftoabw.Po
/bin/sh ../libtool --tag=CXX   --mode=link /usr/bin/g++-4.0  -Wall -Wno-write-strings -O2  -L/opt/local/lib -o pdftoabw pdftoabw.o parseargs.o ../poppler/libpoppler.la  -Wl,-framework,CoreServices -Wl,-framework,ApplicationServices -L/opt/local/lib -lfontconfig -lexpat -lfreetype -lz   -L/opt/local/lib -lxml2 -lpthread -lz -liconv -lm   -lz 
libtool: link: /usr/bin/g++-4.0 -Wall -Wno-write-strings -O2 -o .libs/pdftoabw pdftoabw.o parseargs.o -Wl,-framework -Wl,CoreServices -Wl,-framework -Wl,ApplicationServices  -L/opt/local/lib ../poppler/.libs/libpoppler.dylib /opt/local/lib/liblcms.dylib /opt/local/lib/libjpeg.dylib -lopenjpeg /opt/local/lib/libfontconfig.dylib /opt/local/lib/libexpat.dylib /opt/local/lib/libfreetype.dylib /opt/local/lib/libxml2.dylib -lpthread /opt/local/lib/libiconv.dylib -lm -lz
Making all in glib
/opt/local/bin/glib-mkenums --template poppler-enums.c.template poppler-action.h poppler-date.h poppler-document.h poppler-page.h poppler-attachment.h poppler-form-field.h poppler-annot.h poppler-layer.h poppler.h > xgen-etbc \
&& (cmp -s xgen-etbc poppler-enums.c || cp xgen-etbc poppler-enums.c ) \
&& rm -f xgen-etbc
/opt/local/bin/glib-mkenums --template poppler-enums.h.template poppler-action.h poppler-date.h poppler-document.h poppler-page.h poppler-attachment.h poppler-form-field.h poppler-annot.h poppler-layer.h poppler.h > xgen-etbh \
&& (cmp -s xgen-etbh poppler-enums.h || cp xgen-etbh poppler-enums.h ) \
&& rm -f xgen-etbh \
&& echo timestamp > stamp-poppler-enums.h
make  all-recursive
Making all in .
/opt/local/bin/glib-mkenums --template poppler-enums.c.template poppler-action.h poppler-date.h poppler-document.h poppler-page.h poppler-attachment.h poppler-form-field.h poppler-annot.h poppler-layer.h poppler.h > xgen-etbc \
&& (cmp -s xgen-etbc poppler-enums.c || cp xgen-etbc poppler-enums.c ) \
&& rm -f xgen-etbc
/bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -I../poppler -DG_LOG_DOMAIN=\"Poppler\" -I.. -I../poppler -DXTHREADS -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include   -I/opt/local/include/freetype2 -I/opt/local/include   -I/opt/local/include   -DXTHREADS -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include   -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_SINGLE_INCLUDES  -I/opt/local/include  -O2 -MT poppler-enums.lo -MD -MP -MF .deps/poppler-enums.Tpo -c -o poppler-enums.lo poppler-enums.c
libtool: compile:  /usr/bin/gcc-4.0 -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -I../poppler -DG_LOG_DOMAIN=\"Poppler\" -I.. -I../poppler -DXTHREADS -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include -DXTHREADS -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_SINGLE_INCLUDES -I/opt/local/include -O2 -MT poppler-enums.lo -MD -MP -MF .deps/poppler-enums.Tpo -c poppler-enums.c  -fno-common -DPIC -o .libs/poppler-enums.o
In file included from /opt/local/include/gtk-2.0/gdk/gdkspawn.h:26,
                 from /opt/local/include/gtk-2.0/gdk/gdk.h:52,
                 from poppler-page.h:27,
                 from poppler.h:121,
                 from poppler-action.h:23,
                 from poppler-enums.c:9:
/opt/local/include/glib-2.0/glib/gspawn.h:22:2: error: #error "Only <glib.h> can be included directly."
make[4]: *** [poppler-enums.lo] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

--->  Fetching fftw-3
--->  Attempting to fetch fftw-3.2.1.tar.gz from http://www.fftw.org/
--->  Verifying checksum(s) for fftw-3
--->  Extracting fftw-3
--->  Configuring fftw-3
--->  Building fftw-3
--->  Staging fftw-3 into destroot
--->  Installing fftw-3 @3.2.1_2
--->  Activating fftw-3 @3.2.1_2
--->  Cleaning fftw-3
--->  Fetching py25-setuptools
--->  Attempting to fetch setuptools-0.6c9.tar.gz from http://cheeseshop.python.org/packages/source/s/setuptools/
--->  Verifying checksum(s) for py25-setuptools
--->  Extracting py25-setuptools
--->  Configuring py25-setuptools
--->  Building py25-setuptools
--->  Staging py25-setuptools into destroot
--->  Installing py25-setuptools @0.6c9_0
--->  Activating py25-setuptools @0.6c9_0
--->  Cleaning py25-setuptools
--->  Fetching py25-nose
--->  Attempting to fetch nose-0.10.4.tar.gz from http://distfiles.macports.org/python
--->  Verifying checksum(s) for py25-nose
--->  Extracting py25-nose
--->  Configuring py25-nose
--->  Building py25-nose
--->  Staging py25-nose into destroot
--->  Installing py25-nose @0.10.4_0
--->  Activating py25-nose @0.10.4_0
--->  Cleaning py25-nose
--->  Fetching py25-numpy
--->  Attempting to fetch numpy-1.3.0.tar.gz from http://distfiles.macports.org/python
--->  Verifying checksum(s) for py25-numpy
--->  Extracting py25-numpy
--->  Applying patches to py25-numpy
--->  Configuring py25-numpy
--->  Building py25-numpy
--->  Staging py25-numpy into destroot
--->  Installing py25-numpy @1.3.0_0
--->  Activating py25-numpy @1.3.0_0
--->  Cleaning py25-numpy
--->  Fetching py25-cairo
--->  Attempting to fetch pycairo-1.8.2.tar.gz from http://distfiles.macports.org/py25-cairo
--->  Verifying checksum(s) for py25-cairo
--->  Extracting py25-cairo
--->  Configuring py25-cairo
--->  Building py25-cairo
--->  Staging py25-cairo into destroot
--->  Installing py25-cairo @1.8.2_0
--->  Activating py25-cairo @1.8.2_0
--->  Cleaning py25-cairo
--->  Fetching py25-gobject
--->  Attempting to fetch pygobject-2.18.0.tar.bz2 from http://distfiles.macports.org/py25-gobject
--->  Verifying checksum(s) for py25-gobject
--->  Extracting py25-gobject
--->  Configuring py25-gobject
--->  Building py25-gobject
--->  Staging py25-gobject into destroot
--->  Installing py25-gobject @2.18.0_0
--->  Activating py25-gobject @2.18.0_0
--->  Cleaning py25-gobject
--->  Fetching py25-gtk
--->  Attempting to fetch pygtk-2.14.1.tar.bz2 from http://distfiles.macports.org/py25-gtk
--->  Verifying checksum(s) for py25-gtk
--->  Extracting py25-gtk
--->  Configuring py25-gtk
--->  Building py25-gtk
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.14.1" && make all " returned error 2
Command output:          See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkImage needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkPixbuf needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkPixbufAnimation needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkPixbufLoader needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkPixbufSimpleAnim needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkScreen needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
Warning: Constructor for GdkVisual needs to be updated to new API
         See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors
***INFO*** The coverage of global functions is 74.87% (140/187)
***INFO*** The coverage of methods is 90.51% (372/411)
***INFO*** The coverage of virtual proxies is 69.77% (30/43)
***INFO*** The coverage of virtual accessors is 69.77% (30/43)
***INFO*** There are no declared interface proxies.
if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I./gtk  -I/opt/local/include  -DXTHREADS -I/opt/local/include/python2.5/pycairo -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include   -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include    -O2 -Wall -fno-strict-aliasing -std=c9x -MT _gtk_la-gdk.lo -MD -MP -MF ".deps/_gtk_la-gdk.Tpo" -c -o _gtk_la-gdk.lo `test -f 'gdk.c' || echo './'`gdk.c; \
then mv -f ".deps/_gtk_la-gdk.Tpo" ".deps/_gtk_la-gdk.Plo"; else rm -f ".deps/_gtk_la-gdk.Tpo"; exit 1; fi
libtool: compile:  /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/python2.5/pycairo -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/libpng12 -I/usr/X11R6/include -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -O2 -Wall -fno-strict-aliasing -std=c9x -MT _gtk_la-gdk.lo -MD -MP -MF .deps/_gtk_la-gdk.Tpo -c gdk.c  -fno-common -DPIC -o .libs/_gtk_la-gdk.o
gdk.c: In function 'pygdk_register_classes':
gdk.c:19015: error: 'GDK_TYPE_APP_LAUNCH_CONTEXT' undeclared (first use in this function)
gdk.c:19015: error: (Each undeclared identifier is reported only once
gdk.c:19015: error: for each function it appears in.)
make[2]: *** [_gtk_la-gdk.lo] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

--->  Fetching gmp
--->  Attempting to fetch gmp-4.3.1.tar.bz2 from http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gmp
--->  Verifying checksum(s) for gmp
--->  Extracting gmp
--->  Applying patches to gmp
--->  Configuring gmp
--->  Building gmp
--->  Staging gmp into destroot
--->  Installing gmp @4.3.1_0
--->  Activating gmp @4.3.1_0
--->  Cleaning gmp
--->  Fetching coreutils
--->  Attempting to fetch coreutils-7.4.tar.gz from http://mirrors.kernel.org/gnu/coreutils
--->  Verifying checksum(s) for coreutils
--->  Extracting coreutils
--->  Configuring coreutils
--->  Building coreutils
--->  Staging coreutils into destroot
--->  Installing coreutils @7.4_0
--->  Activating coreutils @7.4_0
--->  Cleaning coreutils
--->  Fetching gtk-nodoka-engine
--->  Attempting to fetch gtk-nodoka-engine-0.7.2.tar.gz from https://fedorahosted.org/releases/n/o/nodoka/
--->  Verifying checksum(s) for gtk-nodoka-engine
--->  Extracting gtk-nodoka-engine
--->  Configuring gtk-nodoka-engine
--->  Building gtk-nodoka-engine
--->  Staging gtk-nodoka-engine into destroot
--->  Installing gtk-nodoka-engine @0.7.2_0
--->  Activating gtk-nodoka-engine @0.7.2_0
--->  Cleaning gtk-nodoka-engine
--->  Fetching gutenprint

            This port only installs the Gutenprint plugin for the Gimp.
            You can get the complete Gutenprint drivers and utilities - except the gimp plugin - from
            http://gimp-print.sourceforge.net
            
--->  Attempting to fetch gutenprint-5.2.3.tar.bz2 from http://distfiles.macports.org/gutenprint
--->  Verifying checksum(s) for gutenprint
--->  Extracting gutenprint
--->  Configuring gutenprint
--->  Building gutenprint
--->  Staging gutenprint into destroot
--->  Installing gutenprint @5.2.3_1
--->  Activating gutenprint @5.2.3_1
--->  Cleaning gutenprint
--->  Fetching exiv2
--->  Attempting to fetch exiv2-0.18.2.tar.gz from http://distfiles.macports.org/exiv2
--->  Verifying checksum(s) for exiv2
--->  Extracting exiv2
--->  Configuring exiv2
--->  Building exiv2
--->  Staging exiv2 into destroot
--->  Installing exiv2 @0.18.2_0
--->  Activating exiv2 @0.18.2_0
--->  Cleaning exiv2
--->  Fetching gtkimageview
--->  Attempting to fetch gtkimageview-1.6.4.tar.gz from http://trac.bjourne.webfactional.com/attachment/wiki/WikiStart/gtkimageview-1.6.4.tar.gz?format=raw&dummy=
--->  Verifying checksum(s) for gtkimageview
--->  Extracting gtkimageview
--->  Applying patches to gtkimageview
--->  Configuring gtkimageview
--->  Building gtkimageview
--->  Staging gtkimageview into destroot
--->  Installing gtkimageview @1.6.4_0
--->  Activating gtkimageview @1.6.4_0
--->  Cleaning gtkimageview
--->  Fetching ufraw
--->  Attempting to fetch ufraw-0.15.tar.gz from http://distfiles.macports.org/ufraw
--->  Verifying checksum(s) for ufraw
--->  Extracting ufraw
--->  Configuring ufraw
--->  Building ufraw
--->  Staging ufraw into destroot
--->  Installing ufraw @0.15_0
--->  Activating ufraw @0.15_0
--->  Cleaning ufraw
--->  Fetching libusb
--->  Attempting to fetch libusb-0.1.12.tar.gz from http://distfiles.macports.org/libusb
--->  Verifying checksum(s) for libusb
--->  Extracting libusb
--->  Applying patches to libusb
--->  Configuring libusb
--->  Building libusb
--->  Staging libusb into destroot
--->  Installing libusb @0.1.12_1
--->  Activating libusb @0.1.12_1
--->  Cleaning libusb
--->  Fetching sane-backends
--->  Attempting to fetch sane-backends-1.0.20.tar.gz from http://distfiles.macports.org/sane-backends
--->  Verifying checksum(s) for sane-backends
--->  Extracting sane-backends
--->  Applying patches to sane-backends
--->  Configuring sane-backends
--->  Building sane-backends
--->  Staging sane-backends into destroot
--->  Installing sane-backends @1.0.20_0
--->  Activating sane-backends @1.0.20_0
--->  Cleaning sane-backends
--->  Fetching xsane
--->  Attempting to fetch xsane-0.996.tar.gz from ftp://ftp.sane-project.org/pub/sane/xsane/
--->  Verifying checksum(s) for xsane
--->  Extracting xsane
--->  Configuring xsane
--->  Building xsane
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_xsane/work/xsane-0.996" && make all " returned error 2
Command output: ranlib: file: liblib.a(usleep.o) has no symbols
making all in intl
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  bindtextdom.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  dcgettext.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  dgettext.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  gettext.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  finddomain.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  loadmsgcat.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  localealias.c
localealias.c: In function 'read_alias_file':
localealias.c:258: warning: pointer targets in passing argument 1 of 'fgets' differ in signedness
localealias.c:264: warning: pointer targets in passing argument 1 of 'strchr' differ in signedness
localealias.c:317: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
localealias.c:318: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  textdomain.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  l10nflist.c
/usr/bin/gcc-4.0 -c -DLOCALEDIR=\"/opt/local/share/locale\" -DGNULOCALEDIR=\"/opt/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/opt/local/share/locale:.\" -DHAVE_CONFIG_H -I.. -I. -I../intl -I../lib -I../include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl       -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -O2 -Wall  explodename.c
explodename.c: In function '_nl_explode_name':
explodename.c:112: warning: pointer targets in passing argument 1 of '_nl_normalize_codeset' differ in signedness
rm -f libintl.a
ar cru libintl.a  bindtextdom.o dcgettext.o dgettext.o gettext.o finddomain.o loadmsgcat.o localealias.o textdomain.o l10nflist.o explodename.o
ranlib libintl.a
making all in src
/usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -DLOCALEDIR=/opt/local/share/locale -DSANELOCALEDIR=/opt/local/share/locale -I. -I. -I../include -I../include  -I/usr/local/include -I/opt/local/include -no-cpp-precomp -D_GNU_SOURCE -I../intl         -DV_MAJOR=0 -DV_MINOR=996 -DSANE_V_MAJOR=1 -DPATH_XSANE_DOC_DIR=/opt/local/share/sane/xsane/doc -DPATH_SANE_DATA_DIR=/opt/local/share/sane -O2 -Wall -I/opt/local/include -DXTHREADS -I/opt/local/include/gimp-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include    xsane-back-gtk.c
xsane-back-gtk.c: In function 'xsane_back_gtk_set_sensitivity':
xsane-back-gtk.c:2615: error: 'SANE_CAP_ALWAYS_SETTABLE' undeclared (first use in this function)
xsane-back-gtk.c:2615: error: (Each undeclared identifier is reported only once
xsane-back-gtk.c:2615: error: for each function it appears in.)
make[1]: *** [xsane-back-gtk.o] Error 1
make: *** [all-recursive] Error 1

--->  Fetching gimp-app
--->  Attempting to fetch ScriptExec.tar.gz from http://distfiles.macports.org/gimp-app
--->  Attempting to fetch gimp.app.skel.tar.gz from http://distfiles.macports.org/gimp-app
--->  Verifying checksum(s) for gimp-app
--->  Extracting gimp-app
--->  Configuring gimp-app
--->  Building gimp-app
--->  Staging gimp-app into destroot
--->  Installing gimp-app @2.6.0_1

    If you are having problems viewing the help files when using Gimp.app,
            1- Make sure you have the user manual installed (port gimp-user-manual)
            2- Add the following line to ~/.gimp-2.6/gimprc :
                (help-locales "LANG")
                        where LANG is your two-letters locale (fr, en, jp, ...)
    
--->  Activating gimp-app @2.6.0_1
--->  Cleaning gimp-app
--->  Fetching macclipboard-gimp
--->  Attempting to fetch macclipboard-gimp-0.7.tar.gz from http://voxel.dl.sourceforge.net/gimp-mac-helper
--->  Verifying checksum(s) for macclipboard-gimp
--->  Extracting macclipboard-gimp
--->  Configuring macclipboard-gimp
--->  Building macclipboard-gimp
--->  Staging macclipboard-gimp into destroot
--->  Installing macclipboard-gimp @0.7_0
--->  Activating macclipboard-gimp @0.7_0
--->  Cleaning macclipboard-gimp
--->  Fetching macfile-gimp
--->  Attempting to fetch macfile-gimp-0.1.tar.gz from http://distfiles.macports.org/macfile-gimp
--->  Verifying checksum(s) for macfile-gimp
--->  Extracting macfile-gimp
--->  Configuring macfile-gimp
--->  Building macfile-gimp
--->  Staging macfile-gimp into destroot
--->  Installing macfile-gimp @0.1_0
--->  Activating macfile-gimp @0.1_0
--->  Cleaning macfile-gimp
--->  Extracting libtheora
Error: On Mac OS X 10.4, libtheora 1.0 requires Xcode 2.5 or later but you have Xcode 2.4.1.
Error: Target org.macports.extract returned: incompatible Xcode version
Error: The following dependencies failed to build: gimp-lqr-plugin gimp2 gegl ffmpeg libtheora libgnomeui gnome-keyring poppler py25-gtk xsane
Error: Unable to upgrade port: 1
--->  Fetching glib1
--->  Verifying checksum(s) for glib1
--->  Extracting glib1
--->  Applying patches to glib1
--->  Configuring glib1
--->  Building glib1
--->  Staging glib1 into destroot
--->  Deactivating glib1 @1.2.10_5
--->  Installing glib1 @1.2.10_6
--->  Activating glib1 @1.2.10_6
--->  Cleaning glib1
--->  Fetching gtk1
--->  Verifying checksum(s) for gtk1
--->  Extracting gtk1
--->  Applying patches to gtk1
--->  Configuring gtk1
--->  Building gtk1
--->  Staging gtk1 into destroot
--->  Deactivating gtk1 @1.2.10_6
--->  Installing gtk1 @1.2.10_8
--->  Activating gtk1 @1.2.10_8
--->  Cleaning gtk1
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching xorg-printproto
--->  Attempting to fetch printproto-1.0.4.tar.bz2 from http://www.x.org/pub/individual/proto/
--->  Verifying checksum(s) for xorg-printproto
--->  Extracting xorg-printproto
--->  Configuring xorg-printproto
--->  Building xorg-printproto
--->  Staging xorg-printproto into destroot
--->  Installing xorg-printproto @1.0.4_0
--->  Activating xorg-printproto @1.0.4_0
--->  Cleaning xorg-printproto
--->  Fetching xorg-util-macros
--->  Attempting to fetch util-macros-1.2.2.tar.bz2 from http://distfiles.macports.org/xorg-util-macros
--->  Verifying checksum(s) for xorg-util-macros
--->  Extracting xorg-util-macros
--->  Configuring xorg-util-macros
--->  Building xorg-util-macros
--->  Staging xorg-util-macros into destroot
--->  Installing xorg-util-macros @1.2.2_0
--->  Activating xorg-util-macros @1.2.2_0
--->  Cleaning xorg-util-macros
--->  Fetching xorg-libXp
--->  Attempting to fetch libXp-1.0.0.tar.bz2 from http://distfiles.macports.org/xorg-libXp
--->  Verifying checksum(s) for xorg-libXp
--->  Extracting xorg-libXp
--->  Configuring xorg-libXp
--->  Building xorg-libXp
--->  Staging xorg-libXp into destroot
--->  Installing xorg-libXp @1.0.0_2
--->  Activating xorg-libXp @1.0.0_2
--->  Cleaning xorg-libXp
--->  Fetching lesstif
--->  Verifying checksum(s) for lesstif
--->  Extracting lesstif
--->  Configuring lesstif
--->  Building lesstif
--->  Staging lesstif into destroot
Warning: violation by /opt/local/LessTif
Warning: lesstif violates the layout of the ports-filesystems!
Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases!
--->  Deactivating lesstif @0.95.0_0
--->  Installing lesstif @0.95.0_3
--->  Activating lesstif @0.95.0_3
--->  Cleaning lesstif
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Configuring libgnomecanvas
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnomecanvas/work/libgnomecanvas-2.26.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... no
checking for bindtextdomain in -lintl... yes
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /opt/local/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /opt/local/bin/msgfmt
checking for xgettext... (cached) /opt/local/bin/xgettext
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.18... yes
checking for LIBGNOMECANVAS... configure: error: Package requirements (  gtk+-2.0 >= 2.0.3   gail >= 1.9.0   libart-2.0 >= 2.3.8   pango >= 1.0.1   pangoft2 >= 1.0.1) were not met:

No package 'gail' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBGNOMECANVAS_CFLAGS
and LIBGNOMECANVAS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: Unable to upgrade port: 1
--->  Fetching libgnomecups
--->  Attempting to fetch libgnomecups-0.2.3.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libgnomecups/0.2/
--->  Verifying checksum(s) for libgnomecups
--->  Extracting libgnomecups
--->  Applying patches to libgnomecups
--->  Configuring libgnomecups
--->  Building libgnomecups
--->  Staging libgnomecups into destroot
--->  Deactivating libgnomecups @0.2.2_0
--->  Installing libgnomecups @0.2.3_1+darwin_8
--->  Activating libgnomecups @0.2.3_1+darwin_8
--->  Cleaning libgnomecups
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching libgnomeprint
--->  Attempting to fetch libgnomeprint-2.18.6.tar.bz2 from http://distfiles.macports.org/libgnomeprint
--->  Verifying checksum(s) for libgnomeprint
--->  Extracting libgnomeprint
--->  Applying patches to libgnomeprint
--->  Configuring libgnomeprint
--->  Building libgnomeprint
--->  Staging libgnomeprint into destroot
--->  Deactivating libgnomeprint @2.12.1_0
--->  Installing libgnomeprint @2.18.6_0
--->  Activating libgnomeprint @2.18.6_0
--->  Cleaning libgnomeprint
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Configuring libgnomecanvas
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libgnomecanvas/work/libgnomecanvas-2.26.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... no
checking for bindtextdomain in -lintl... yes
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /opt/local/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /opt/local/bin/msgfmt
checking for xgettext... (cached) /opt/local/bin/xgettext
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.18... yes
checking for LIBGNOMECANVAS... configure: error: Package requirements (  gtk+-2.0 >= 2.0.3   gail >= 1.9.0   libart-2.0 >= 2.3.8   pango >= 1.0.1   pangoft2 >= 1.0.1) were not met:

No package 'gail' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBGNOMECANVAS_CFLAGS
and LIBGNOMECANVAS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: Unable to upgrade port: 1
--->  Fetching libgnomeprintui
--->  Attempting to fetch libgnomeprintui-2.18.4.tar.bz2 from ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libgnomeprintui/2.18/
--->  Verifying checksum(s) for libgnomeprintui
--->  Extracting libgnomeprintui
--->  Configuring libgnomeprintui
--->  Building libgnomeprintui
--->  Staging libgnomeprintui into destroot
--->  Deactivating libgnomeprintui @2.12.1_0
--->  Installing libgnomeprintui @2.18.4_0
--->  Activating libgnomeprintui @2.18.4_0
--->  Cleaning libgnomeprintui
--->  Fetching libmikmod
--->  Attempting to fetch libmikmod-3.2.0-beta2.tar.bz2 from http://arn.se.distfiles.macports.org/libmikmod
--->  Verifying checksum(s) for libmikmod
--->  Extracting libmikmod
--->  Applying patches to libmikmod
--->  Configuring libmikmod
--->  Building libmikmod
--->  Staging libmikmod into destroot
--->  Deactivating libmikmod @3.2.0-beta2_0
--->  Installing libmikmod @3.2.0-beta2_1
--->  Activating libmikmod @3.2.0-beta2_1
--->  Cleaning libmikmod
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching libsdl_gfx
--->  Attempting to fetch SDL_gfx-2.0.19.tar.gz from http://distfiles.macports.org/libsdl_gfx
--->  Verifying checksum(s) for libsdl_gfx
--->  Extracting libsdl_gfx
--->  Configuring libsdl_gfx
--->  Building libsdl_gfx
--->  Staging libsdl_gfx into destroot
--->  Deactivating libsdl_gfx @2.0.16_0
--->  Installing libsdl_gfx @2.0.19_0
--->  Activating libsdl_gfx @2.0.19_0
--->  Cleaning libsdl_gfx
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching libsdl_image
--->  Attempting to fetch SDL_image-1.2.7.tar.gz from http://distfiles.macports.org/libsdl_image
--->  Verifying checksum(s) for libsdl_image
--->  Extracting libsdl_image
--->  Configuring libsdl_image
--->  Building libsdl_image
--->  Staging libsdl_image into destroot
--->  Deactivating libsdl_image @1.2.5_1+darwin_8
--->  Installing libsdl_image @1.2.7_0
--->  Activating libsdl_image @1.2.7_0
--->  Cleaning libsdl_image
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching smpeg
--->  Verifying checksum(s) for smpeg
--->  Extracting smpeg
--->  Applying patches to smpeg
--->  Configuring smpeg
--->  Building smpeg
--->  Staging smpeg into destroot
--->  Deactivating smpeg @0.4.4_6+darwin_8
--->  Installing smpeg @0.4.4_8
--->  Activating smpeg @0.4.4_8
--->  Cleaning smpeg
--->  Fetching libsdl_mixer
--->  Attempting to fetch SDL_mixer-1.2.8.tar.gz from http://www.libsdl.org/projects/SDL_mixer/release/
--->  Verifying checksum(s) for libsdl_mixer
--->  Extracting libsdl_mixer
--->  Configuring libsdl_mixer
--->  Building libsdl_mixer
--->  Staging libsdl_mixer into destroot
--->  Deactivating libsdl_mixer @1.2.7_0+darwin_8
--->  Installing libsdl_mixer @1.2.8_1
--->  Activating libsdl_mixer @1.2.8_1
--->  Cleaning libsdl_mixer
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching libsdl_ttf
--->  Attempting to fetch SDL_ttf-2.0.9.tar.gz from http://distfiles.macports.org/libsdl_ttf
--->  Verifying checksum(s) for libsdl_ttf
--->  Extracting libsdl_ttf
--->  Configuring libsdl_ttf
--->  Building libsdl_ttf
--->  Staging libsdl_ttf into destroot
--->  Deactivating libsdl_ttf @2.0.8_1+darwin_8
--->  Installing libsdl_ttf @2.0.9_0
--->  Activating libsdl_ttf @2.0.9_0
--->  Cleaning libsdl_ttf
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching perl5.8
--->  Attempting to fetch perl-5.8.9.tar.bz2 from http://distfiles.macports.org/perl5.8
--->  Verifying checksum(s) for perl5.8
--->  Extracting perl5.8
--->  Applying patches to perl5.8
--->  Configuring perl5.8
--->  Building perl5.8
--->  Staging perl5.8 into destroot
--->  Deactivating perl5.8 @5.8.8_0+darwin_8
--->  Installing perl5.8 @5.8.9_3
--->  Activating perl5.8 @5.8.9_3
--->  Cleaning perl5.8
--->  Fetching physfs
--->  Attempting to fetch physfs-1.0.2.tar.gz from http://icculus.org/physfs/downloads/
--->  Verifying checksum(s) for physfs
--->  Extracting physfs
--->  Configuring physfs
--->  Building physfs
--->  Staging physfs into destroot
--->  Deactivating physfs @1.0.1_0+darwin_8
--->  Installing physfs @1.0.2_0+darwin_8
--->  Activating physfs @1.0.2_0+darwin_8
--->  Cleaning physfs
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Configuring xorg-libXrandr
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXrandr/work/libXrandr-1.3.0" && ./configure --prefix=/opt/local " returned error 1
Command output: checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin8.11.1 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for RANDR... configure: error: Package requirements (x11 randrproto >= 1.3 xext xextproto xrender renderproto) were not met:

No package 'renderproto' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables RANDR_CFLAGS
and RANDR_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Error: The following dependencies failed to build: xorg-libXrandr
Error: Unable to upgrade port: 1
--->  Fetching xephem
--->  Attempting to fetch xephem-3.7.2.tar.gz from http://distfiles.macports.org/xephem
--->  Verifying checksum(s) for xephem
--->  Extracting xephem
--->  Configuring xephem
--->  Building xephem
--->  Staging xephem into destroot
Warning: violation by /usr
Warning: xephem violates the layout of the ports-filesystems!
Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases!
--->  Deactivating xephem @3.7_0
--->  Installing xephem @3.7.2_0
--->  Activating xephem @3.7.2_0
--->  Cleaning xephem
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
--->  Fetching xmahjongg
--->  Attempting to fetch xmahjongg-3.7.tar.gz from http://distfiles.macports.org/xmahjongg
--->  Verifying checksum(s) for xmahjongg
--->  Extracting xmahjongg
--->  Configuring xmahjongg
--->  Building xmahjongg
--->  Staging xmahjongg into destroot
--->  Deactivating xmahjongg @3.6.1_0
--->  Installing xmahjongg @3.7_2
--->  Activating xmahjongg @3.7_2
Error: Target org.macports.activate returned: Image error: /opt/local/share/xmahjongg/backgrounds/default.gif already exists and does not belong to a registered port.  Unable to activate port xmahjongg.
--->  Activating xorg-renderproto @0.9.3_0
Error: Target org.macports.activate returned: Image error: /opt/local/include/X11/extensions/render.h is being used by the active render port.  Please deactivate this port first, or use 'port -f activate xorg-renderproto' to force the activation.
Error: The following dependencies failed to build: xorg-renderproto
Error: Unable to upgrade port: 1
Gulliver:~ aszy$