Ticket #21930: erlang_debug.log

sudo port -d upgrade erlang
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/erlang
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: erlang R13B02_1 exists in the ports tree
DEBUG: erlang R13B01_1  is the latest installed
DEBUG: erlang R13B01_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/erlang
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port erlang.
DEBUG: Requested variant darwin is not provided by port erlang.
DEBUG: Requested variant macosx is not provided by port erlang.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gawk 3.1.7_0 exists in the ports tree
DEBUG: gawk 3.1.7_0  is the latest installed
DEBUG: gawk 3.1.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port gawk.
DEBUG: Requested variant darwin is not provided by port gawk.
DEBUG: Requested variant macosx is not provided by port gawk.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libiconv.
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gperf.
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gettext.
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncurses.
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncursesw.
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port expat.
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: wxWidgets 2.8.10_0 exists in the ports tree
DEBUG: wxWidgets 2.8.10_0  is the latest installed
DEBUG: wxWidgets 2.8.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port wxWidgets.
DEBUG: Requested variant darwin is not provided by port wxWidgets.
DEBUG: Requested variant macosx is not provided by port wxWidgets.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 6b_3 exists in the ports tree
DEBUG: jpeg 6b_3  is the latest installed
DEBUG: jpeg 6b_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port jpeg.
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.1_0 exists in the ports tree
DEBUG: tiff 3.9.1_0 +macosx is the latest installed
DEBUG: tiff 3.9.1_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port tiff.
DEBUG: Requested variant darwin is not provided by port tiff.
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port zlib.
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! tiff 3.9.1_0 >= tiff 3.9.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.38_0 exists in the ports tree
DEBUG: libpng 1.2.38_0  is the latest installed
DEBUG: libpng 1.2.38_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libpng.
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: No need to upgrade! libpng 1.2.38_0 >= libpng 1.2.38_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsdl 1.2.14_6 exists in the ports tree
DEBUG: libsdl 1.2.14_6  is the latest installed
DEBUG: libsdl 1.2.14_6  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libsdl.
DEBUG: Requested variant darwin is not provided by port libsdl.
DEBUG: Requested variant macosx is not provided by port libsdl.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1_0  is the latest installed
DEBUG: xorg-libXext 1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXext.
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1  is the latest installed
DEBUG: pkgconfig 0.23_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port pkgconfig.
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0  is the latest installed
DEBUG: xorg-xproto 7.0.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xproto.
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
DEBUG: xorg-xextproto 7.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xextproto.
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3_0  is the latest installed
DEBUG: xorg-libX11 1.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libX11.
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.3.0_0  is the latest installed
DEBUG: xorg-util-macros 1.3.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-util-macros.
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros 1.3.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.4_0  is the latest installed
DEBUG: xorg-xtrans 1.2.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xtrans.
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0  is the latest installed
DEBUG: xorg-inputproto 2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-inputproto.
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.3_0  is the latest installed
DEBUG: xorg-kbproto 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-kbproto.
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2  is the latest installed
DEBUG: autoconf 2.64_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port autoconf.
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: perl5 is *not* installed by MacPorts
DEBUG: Searching for dependency: perl5
DEBUG: Didn't find receipt, going to depspec regex for: perl5
DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$
DEBUG: perl5 not installed, soft dependency satisfied
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port m4.
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1  is the latest installed
DEBUG: help2man 1.36.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port help2man.
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext.
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0  is the latest installed
DEBUG: automake 1.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port automake.
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0  is the latest installed
DEBUG: libtool 2.2.6a_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libtool.
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXdmcp.
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0  is the latest installed
DEBUG: xorg-libXau 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXau.
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: No need to upgrade! xorg-libX11 1.3_0 >= xorg-libX11 1.3_0
DEBUG: No need to upgrade! xorg-libXext 1.1_0 >= xorg-libXext 1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
DEBUG: xorg-libXrandr 1.3.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXrandr.
DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0  is the latest installed
DEBUG: xrender 0.9.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xrender.
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0  is the latest installed
DEBUG: xorg-renderproto 0.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-renderproto.
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
DEBUG: xorg-randrproto 1.3.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-randrproto.
DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0
DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1
DEBUG: No need to upgrade! libsdl 1.2.14_6 >= libsdl 1.2.14_6
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsdl_mixer 1.2.8_1 exists in the ports tree
DEBUG: libsdl_mixer 1.2.8_1  is the latest installed
DEBUG: libsdl_mixer 1.2.8_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port libsdl_mixer.
DEBUG: Requested variant macosx is not provided by port libsdl_mixer.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: smpeg 0.4.4_8 exists in the ports tree
DEBUG: smpeg 0.4.4_8  is the latest installed
DEBUG: smpeg 0.4.4_8  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port smpeg.
DEBUG: Requested variant darwin is not provided by port smpeg.
DEBUG: Requested variant macosx is not provided by port smpeg.
DEBUG: No need to upgrade! smpeg 0.4.4_8 >= smpeg 0.4.4_8
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libvorbis 1.2.3_0 exists in the ports tree
DEBUG: libvorbis 1.2.3_0  is the latest installed
DEBUG: libvorbis 1.2.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libvorbis.
DEBUG: Requested variant darwin is not provided by port libvorbis.
DEBUG: Requested variant macosx is not provided by port libvorbis.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libogg 1.1.4_0 exists in the ports tree
DEBUG: libogg 1.1.4_0  is the latest installed
DEBUG: libogg 1.1.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libogg.
DEBUG: Requested variant darwin is not provided by port libogg.
DEBUG: Requested variant macosx is not provided by port libogg.
DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0
DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0
Warning: Skipping upgrade since libsdl_mixer 1.2.8_1 >= libsdl_mixer 1.2.8_1, even though installed variants "" do not match "+darwin". Use 'upgrade --enforce-variants' to switch to the requested variants.
DEBUG: No need to upgrade! wxWidgets 2.8.10_0 >= wxWidgets 2.8.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.7_0 exists in the ports tree
DEBUG: tk 8.5.7_0 +darwin is the latest installed
DEBUG: tk 8.5.7_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port tk.
DEBUG: Requested variant macosx is not provided by port tk.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.7_0 exists in the ports tree
DEBUG: tcl 8.5.7_0 +darwin is the latest installed
DEBUG: tcl 8.5.7_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port tcl.
DEBUG: Requested variant macosx is not provided by port tcl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tcl 8.5.7_0 >= tcl 8.5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.13_2 exists in the ports tree
DEBUG: Xft2 2.1.13_2  is the latest installed
DEBUG: Xft2 2.1.13_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port Xft2.
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.9_1 exists in the ports tree
DEBUG: freetype 2.3.9_1 +macosx is the latest installed
DEBUG: freetype 2.3.9_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port freetype.
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.7.3_0 exists in the ports tree
DEBUG: fontconfig 2.7.3_0 +macosx is the latest installed
DEBUG: fontconfig 2.7.3_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port fontconfig.
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0
DEBUG: No need to upgrade! Xft2 2.1.13_2 >= Xft2 2.1.13_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
DEBUG: No need to upgrade! tk 8.5.7_0 >= tk 8.5.7_0
--->  Computing dependencies for erlang
DEBUG: Searching for dependency: gawk
DEBUG: Found Dependency: receipt exists for gawk
DEBUG: Searching for dependency: wxWidgets
DEBUG: Found Dependency: receipt exists for wxWidgets
DEBUG: Searching for dependency: tk
DEBUG: Found Dependency: receipt exists for tk
DEBUG: Executing org.macports.main (erlang)
DEBUG: Skipping completed org.macports.unarchive (erlang)
DEBUG: Skipping completed org.macports.fetch (erlang)
DEBUG: Skipping completed org.macports.checksum (erlang)
DEBUG: Skipping completed org.macports.extract (erlang)
DEBUG: Skipping completed org.macports.patch (erlang)
DEBUG: Skipping completed org.macports.configure (erlang)
--->  Building erlang
DEBUG: Executing org.macports.build (erlang)
DEBUG: port disallows a parallel build
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02" && /usr/bin/make all'
test X"$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 make generate depend)
make -f powerpc-apple-darwin9.8.0/Makefile generate
make[2]: Nothing to be done for `generate'.
make -f powerpc-apple-darwin9.8.0/Makefile depend
/usr/bin/gcc-4.0 -MM -MG -mdynamic-no-pic -Ipcre -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT  -Ipowerpc-apple-darwin9.8.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ipowerpc-apple-darwin9.8.0 -Izlib  -Ipcre -Ihipe -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -Idrivers/common beam/atom.c beam/beam_bif_load.c beam/beam_bp.c beam/beam_catches.c beam/beam_debug.c beam/beam_emu.c beam/beam_load.c beam/benchmark.c beam/bif.c beam/big.c beam/binary.c beam/break.c beam/copy.c beam/dist.c beam/elib_malloc.c beam/elib_memmove.c beam/erl_afit_alloc.c beam/erl_alloc.c beam/erl_alloc_util.c beam/erl_arith.c beam/erl_async.c beam/erl_bestfit_alloc.c beam/erl_bif_chksum.c beam/erl_bif_ddll.c beam/erl_bif_guard.c beam/erl_bif_info.c beam/erl_bif_lists.c beam/erl_bif_op.c beam/erl_bif_os.c beam/erl_bif_port.c beam/erl_bif_re.c beam/erl_bif_timer.c beam/erl_bif_trace.c beam/erl_bits.c beam/erl_db.c beam/erl_db_hash.c beam/erl_db_tree.c beam/erl_db_util.c beam/erl_debug.c beam/erl_drv_thread.c beam/erl_fun.c beam/erl_gc.c beam/erl_goodfit_alloc.c beam/erl_init.c beam/erl_instrument.c beam/erl_lock_check.c beam/erl_lock_count.c beam/erl_math.c beam/erl_md5.c beam/erl_message.c beam/erl_monitors.c beam/erl_mtrace.c beam/erl_nmgc.c beam/erl_node_tables.c beam/erl_obsolete.c beam/erl_port_task.c beam/erl_posix_str.c beam/erl_printf_term.c beam/erl_process.c beam/erl_process_dict.c beam/erl_process_dump.c beam/erl_process_lock.c beam/erl_resolv_dns.c beam/erl_resolv_nodns.c beam/erl_term.c beam/erl_time_sup.c beam/erl_trace.c beam/erl_unicode.c beam/erl_zlib.c beam/export.c beam/external.c beam/fix_alloc.c beam/hash.c beam/index.c beam/io.c beam/module.c beam/packet_parser.c beam/register.c beam/safe_hash.c beam/time.c beam/utils.c \
                | sed 's|^\([^:]*:\)|$(OBJDIR)/\1|g;s|powerpc-apple-darwin9.8.0/opt/plain/|$(TTF_DIR)/|g;s|\([  ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' > powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -MG -mdynamic-no-pic -Ipcre -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT  -Ipowerpc-apple-darwin9.8.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ipowerpc-apple-darwin9.8.0 -Izlib  -Ipcre -Ihipe -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -Idrivers/common drivers/common/efile_drv.c drivers/common/gzio.c drivers/common/inet_drv.c drivers/common/ram_file_drv.c drivers/common/zlib_drv.c drivers/unix/bin_drv.c drivers/unix/mem_drv.c drivers/unix/multi_drv.c drivers/unix/sig_drv.c drivers/unix/ttsl_drv.c drivers/unix/unix_efile.c \
                | sed 's|^\([^:]*:\)|$(OBJDIR)/\1|g;s|powerpc-apple-darwin9.8.0/opt/plain/|$(TTF_DIR)/|g;s|\([  ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -MG -mdynamic-no-pic -Ipcre -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT  -Ipowerpc-apple-darwin9.8.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ipowerpc-apple-darwin9.8.0 -Izlib  -Ipcre -Ihipe -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -Idrivers/common sys/unix/erl9_start.c sys/unix/erl_child_setup.c sys/unix/erl_main.c sys/unix/erl_unix_sys_ddll.c sys/unix/sys.c sys/unix/sys_float.c sys/unix/sys_time.c sys/common/erl_check_io.c sys/common/erl_mseg.c sys/common/erl_mtrace_sys_wrap.c sys/common/erl_poll.c \
                | sed 's|^\([^:]*:\)|$(OBJDIR)/\1|g;s|powerpc-apple-darwin9.8.0/opt/plain/|$(TTF_DIR)/|g;s|\([  ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -MG -mdynamic-no-pic -Ipcre -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT  -Ipowerpc-apple-darwin9.8.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ipowerpc-apple-darwin9.8.0 -Izlib  -Ipcre -Ihipe -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -Idrivers/common powerpc-apple-darwin9.8.0/erl_atom_table.c powerpc-apple-darwin9.8.0/erl_bif_table.c powerpc-apple-darwin9.8.0/erl_bif_wrap.c powerpc-apple-darwin9.8.0/erl_pbifs.c powerpc-apple-darwin9.8.0/preload.c powerpc-apple-darwin9.8.0/opt/plain/beam_opcodes.c powerpc-apple-darwin9.8.0/opt/plain/driver_tab.c \
                | sed 's|^\([^:]*:\)|$(OBJDIR)/\1|g;s|powerpc-apple-darwin9.8.0/opt/plain/|$(TTF_DIR)/|g;s|\([  ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -MG -mdynamic-no-pic -Ipcre -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT  -Ipowerpc-apple-darwin9.8.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ipowerpc-apple-darwin9.8.0 -Izlib  -Ipcre -Ihipe -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -Idrivers/common -DENABLE_ELIB_MALLOC -DELIB_ALLOC_IS_CLIB -DELIB_HEAP_SBRK beam/elib_malloc.c beam/elib_memmove.c beam/erl_bif_info.c beam/utils.c beam/erl_alloc.c \
                | sed 's|^\([^:]*\).o[  ]*:|$(OBJDIR)/\1.elib.o:|g;s|powerpc-apple-darwin9.8.0/opt/plain/|$(TTF_DIR)/|g;s|\([   ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' >> powerpc-apple-darwin9.8.0/depend.mk
test X"$ERTS_SKIP_DEPEND" = X"true" || (cd erts/lib_src && ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 make depend)
make -f powerpc-apple-darwin9.8.0/Makefile depend
Generating dependency file powerpc-apple-darwin9.8.0/depend.mk...
/usr/bin/gcc-4.0 -MM -DUSE_THREADS  -D_THREAD_SAFE -D_REENTRANT  -m32 -O3 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DHAVE_CONFIG_H  -I../include -I../include/powerpc-apple-darwin9.8.0 -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -I../emulator/beam -I../emulator/sys/unix common/ethread.c \
                | sed 's|^\([^:]*\)\.o:|$(r_OBJ_DIR)/\1.o:|g;s|powerpc-apple-darwin9.8.0/opt/|$(TT_DIR)/|g;s|powerpc-apple-darwin9.8.0/|$(TARGET)/|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -DUSE_THREADS  -D_THREAD_SAFE -D_REENTRANT  -m32 -O3 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DHAVE_CONFIG_H  -I../include -I../include/powerpc-apple-darwin9.8.0 -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -I../emulator/beam -I../emulator/sys/unix common/erl_printf_format.c common/erl_printf.c common/erl_misc_utils.c \
                | sed 's|^\([^:]*\)\.o:|$(r_OBJ_DIR)/\1.o:|g;s|powerpc-apple-darwin9.8.0/opt/|$(TT_DIR)/|g;s|powerpc-apple-darwin9.8.0/|$(TARGET)/|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM  -m32 -O3 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DHAVE_CONFIG_H  -I../include -I../include/powerpc-apple-darwin9.8.0 -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -I../emulator/beam -I../emulator/sys/unix common/erl_printf_format.c common/erl_printf.c common/erl_misc_utils.c \
                | sed 's|^\([^:]*\)\.o:|$(OBJ_DIR)/\1.o:|g;s|powerpc-apple-darwin9.8.0/opt/|$(TT_DIR)/|g;s|powerpc-apple-darwin9.8.0/|$(TARGET)/|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM -DUSE_THREADS  -D_THREAD_SAFE -D_REENTRANT  -m32 -O3 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DHAVE_CONFIG_H  -I../include -I../include/powerpc-apple-darwin9.8.0 -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -I../emulator/beam -I../emulator/sys/unix common/erl_memory_trace_parser.c \
                | sed 's|^\([^:]*\)\.o:|$(r_OBJ_DIR)/\1.o:|g;s|powerpc-apple-darwin9.8.0/opt/|$(TT_DIR)/|g;s|powerpc-apple-darwin9.8.0/|$(TARGET)/|g' >> powerpc-apple-darwin9.8.0/depend.mk
/usr/bin/gcc-4.0 -MM  -m32 -O3 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DHAVE_CONFIG_H  -I../include -I../include/powerpc-apple-darwin9.8.0 -I../include/internal -I../include/internal/powerpc-apple-darwin9.8.0 -I../emulator/beam -I../emulator/sys/unix common/erl_memory_trace_parser.c \
                | sed 's|^\([^:]*\)\.o:|$(OBJ_DIR)/\1.o:|g;s|powerpc-apple-darwin9.8.0/opt/|$(TT_DIR)/|g;s|powerpc-apple-darwin9.8.0/|$(TARGET)/|g' >> powerpc-apple-darwin9.8.0/depend.mk
cd erts && ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 make NO_START_SCRIPTS=true  FLAVOR=
make -f powerpc-apple-darwin9.8.0/Makefile generate
make[3]: Nothing to be done for `generate'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/lib_src && make opt
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile generate
make[3]: Nothing to be done for `generate'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/lib_src && make opt
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[5]: Nothing to be done for `all'.
make[2]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/lib_src && make opt
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[6]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `all'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[3]: Nothing to be done for `all'.
cd lib && \
          ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 PATH=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/bin:${PATH} \
                make opt SECONDARY_BOOTSTRAP=true
=== Entering application parsetools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application parsetools
make[2]: Nothing to be done for `opt'.
Makefile:48: warning: overriding commands for target `docs'
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/make/otp_subdir.mk:28: warning: ignoring old commands for target `docs'
=== Entering application hipe
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application hipe
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/hipe ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/hipe ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/hipe/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/hipe/ebin ; fi
for x in lib/hipe/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/hipe/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/include ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/include ; fi
for x in lib/parsetools/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/parsetools/include/*.hrl; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/parsetools/include/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1 ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1 ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/src ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/src ; fi
for x in lib/asn1/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/asn1/src/*.[eh]rl; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/asn1/src/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
cd lib && \
          ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 PATH=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/bin:${PATH} \
                make opt TERTIARY_BOOTSTRAP=true
=== Entering application snmp
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application snmp
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp/include ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp/include ; fi
for x in lib/snmp/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/snmp/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
cd lib && \
          ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 PATH=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/bin:${PATH} \
                make opt FOURTH_BOOTSTRAP=true
=== Entering application sasl
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application sasl
=== Entering application jinterface
set -e; set -x; \
        case "make" in *clearmake*) tflag="-T";; *) tflag="";; esac; \
        if test -f com/ericsson/otp/erlang/ignore_config_record.inf; then xflag=$tflag; fi; \
        (cd com/ericsson/otp/erlang && make -f Makefile.otp $xflag opt)
+ case "make" in
+ tflag=
+ test -f com/ericsson/otp/erlang/ignore_config_record.inf
+ xflag=
+ cd com/ericsson/otp/erlang
+ make -f Makefile.otp opt
if [ ! -d "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/lib/jinterface/priv/" ];then mkdir "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/lib/jinterface/priv/"; fi
make[3]: Nothing to be done for `opt'.
=== Leaving application jinterface
=== Entering application ic
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application ic
Makefile:62: warning: overriding commands for target `docs'
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/make/otp_subdir.mk:28: warning: ignoring old commands for target `docs'
=== Entering application syntax_tools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application syntax_tools
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl/include ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl/include ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/include ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/include ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx/ebin ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx/include ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx/include ; fi
for x in lib/ic/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/ic/include/*.idl; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/include/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/ic/include/*.h; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/ic/include/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/sasl/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/sasl/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/syntax_tools ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/syntax_tools ; fi
if test ! -d /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/syntax_tools/ebin ; then mkdir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/syntax_tools/ebin ; fi
for x in lib/syntax_tools/ebin/*.beam; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/syntax_tools/ebin/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
for x in lib/wx/include/*.hrl; do \
                BN=`basename $x`; \
                TF=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/lib/wx/include/$BN; \
                test -f  $TF && \
                test '!' -z "`find $x -newer $TF -print`" && \
                        cp $x $TF; \
                test '!' -f $TF && \
                        cp $x $TF; \
                true; \
        done
cd lib && \
          ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02 PATH=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/bootstrap/bin:${PATH} \
                make opt BUILD_ALL=true
=== Entering application stdlib
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application stdlib
=== Entering application sasl
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application sasl
=== Entering application kernel
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application kernel
=== Entering application compiler
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application compiler
=== Entering application tools
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/lib_src && make opt
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[6]: Nothing to be done for `all'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application tools
=== Entering application snmp
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application snmp
=== Entering application otp_mibs
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application otp_mibs
=== Entering application appmon
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application appmon
=== Entering application erl_interface
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[3]: Nothing to be done for `opt'.
=== Leaving application erl_interface
=== Entering application asn1
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `opt'.
=== Leaving application asn1
=== Entering application jinterface
set -e; set -x; \
        case "make" in *clearmake*) tflag="-T";; *) tflag="";; esac; \
        if test -f com/ericsson/otp/erlang/ignore_config_record.inf; then xflag=$tflag; fi; \
        (cd com/ericsson/otp/erlang && make -f Makefile.otp $xflag opt)
+ case "make" in
+ tflag=
+ test -f com/ericsson/otp/erlang/ignore_config_record.inf
+ xflag=
+ cd com/ericsson/otp/erlang
+ make -f Makefile.otp opt
if [ ! -d "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/lib/jinterface/priv/" ];then mkdir "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/lib/jinterface/priv/"; fi
make[3]: Nothing to be done for `opt'.
=== Leaving application jinterface
=== Entering application wx
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
=== Skipping subdir demos, it is missing
make[3]: Nothing to be done for `opt'.
=== Leaving application wx
=== Entering application debugger
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application debugger
=== Entering application reltool
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application reltool
=== Entering application gs
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application gs
=== Entering application inets
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application inets
=== Entering application ic
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application ic
=== Entering application mnesia
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application mnesia
=== Entering application crypto
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[3]: Nothing to be done for `opt'.
=== Leaving application crypto
=== Entering application orber
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[4]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
echo "Nothing to build" 
Nothing to build
make[4]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application orber
=== Entering application os_mon
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
make[4]: Nothing to be done for `debug'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application os_mon
=== Entering application parsetools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application parsetools
Makefile:62: warning: overriding commands for target `docs'
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/make/otp_subdir.mk:28: warning: ignoring old commands for target `docs'
=== Entering application syntax_tools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application syntax_tools
=== Entering application pman
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application pman
=== Entering application public_key
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application public_key
=== Entering application ssl
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
/usr/bin/gcc-4.0  -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -o ../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock ../priv/obj/powerpc-apple-darwin9.8.0/esock.o ../priv/obj/powerpc-apple-darwin9.8.0/debuglog.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_poll.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_osio.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_utils.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_posix_str.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_openssl.o -lutil -ldl -lm   -L/usr/lib -lssl -lcrypto
Undefined symbols:
  "_SSL_CTX_set_info_callback", referenced from:
      _set_ssl_parameters in esock_openssl.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock] Error 1
make[3]: *** [opt] Error 2
make[2]: *** [opt] Error 2
make[1]: *** [opt] Error 2
make: *** [libs] Error 2
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02" && /usr/bin/make all " returned error 2
Command output: === Entering application syntax_tools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application syntax_tools
=== Entering application pman
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application pman
=== Entering application public_key
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application public_key
=== Entering application ssl
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
/usr/bin/gcc-4.0  -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -o ../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock ../priv/obj/powerpc-apple-darwin9.8.0/esock.o ../priv/obj/powerpc-apple-darwin9.8.0/debuglog.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_poll.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_osio.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_utils.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_posix_str.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_openssl.o -lutil -ldl -lm   -L/usr/lib -lssl -lcrypto
Undefined symbols:
  "_SSL_CTX_set_info_callback", referenced from:
      _set_ssl_parameters in esock_openssl.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock] Error 1
make[3]: *** [opt] Error 2
make[2]: *** [opt] Error 2
make[1]: *** [opt] Error 2
make: *** [libs] Error 2

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02" && /usr/bin/make all " returned error 2
Command output: === Entering application syntax_tools
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application syntax_tools
=== Entering application pman
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application pman
=== Entering application public_key
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
=== Leaving application public_key
=== Entering application ssl
make[3]: Nothing to be done for `opt'.
make[3]: Nothing to be done for `opt'.
make -f powerpc-apple-darwin9.8.0/Makefile TYPE=opt
/usr/bin/gcc-4.0  -m32 -O2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/work/erlang-R13B02/erts/powerpc-apple-darwin9.8.0  -no-cpp-precomp  -I/opt/local/include  -o ../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock ../priv/obj/powerpc-apple-darwin9.8.0/esock.o ../priv/obj/powerpc-apple-darwin9.8.0/debuglog.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_poll.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_osio.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_utils.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_posix_str.o ../priv/obj/powerpc-apple-darwin9.8.0/esock_openssl.o -lutil -ldl -lm   -L/usr/lib -lssl -lcrypto
Undefined symbols:
  "_SSL_CTX_set_info_callback", referenced from:
      _set_ssl_parameters in esock_openssl.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [../priv/bin/powerpc-apple-darwin9.8.0/ssl_esock] Error 1
make[3]: *** [opt] Error 2
make[2]: *** [opt] Error 2
make[1]: *** [opt] Error 2
make: *** [libs] Error 2

    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for erlang): org.macports.archive org.macports.build org.macports.destroot
DEBUG: Registry error: perl5 not registered as installed & active.
    while executing
"registry::active $portname"
Error: Unable to upgrade port: 1