1 | [dozer:~] andfried% sudo port -d install emos |
---|
2 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/emos |
---|
3 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/emos |
---|
4 | DEBUG: OS Platform: darwin |
---|
5 | DEBUG: OS Version: 9.8.0 |
---|
6 | DEBUG: Mac OS X Version: 10.5 |
---|
7 | DEBUG: System Arch: powerpc |
---|
8 | DEBUG: setting option os.universal_supported to yes |
---|
9 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
10 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
11 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
12 | DEBUG: Requested variant powerpc is not provided by port emos. |
---|
13 | DEBUG: Requested variant darwin is not provided by port emos. |
---|
14 | DEBUG: Requested variant macosx is not provided by port emos. |
---|
15 | DEBUG: Executing variant gcc43 provides gcc43 |
---|
16 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 |
---|
17 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
18 | DEBUG: gcc43 4.3.4_0 exists in the ports tree |
---|
19 | DEBUG: gcc43 4.3.4_0 +powerpc is the latest installed |
---|
20 | DEBUG: gcc43 4.3.4_0 +powerpc is active |
---|
21 | DEBUG: Merging existing variants powerpc into variants |
---|
22 | DEBUG: new fully merged portvariants: |
---|
23 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 |
---|
24 | DEBUG: OS Platform: darwin |
---|
25 | DEBUG: OS Version: 9.8.0 |
---|
26 | DEBUG: Mac OS X Version: 10.5 |
---|
27 | DEBUG: System Arch: powerpc |
---|
28 | DEBUG: setting option os.universal_supported to yes |
---|
29 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
30 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
31 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
32 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
33 | DEBUG: Requested variant darwin is not provided by port gcc43. |
---|
34 | DEBUG: Requested variant macosx is not provided by port gcc43. |
---|
35 | DEBUG: Executing variant powerpc provides powerpc |
---|
36 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
---|
37 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
38 | DEBUG: gmp 4.3.1_1 exists in the ports tree |
---|
39 | DEBUG: gmp 4.3.1_1 +powerpc is the latest installed |
---|
40 | DEBUG: gmp 4.3.1_1 +powerpc is active |
---|
41 | DEBUG: Merging existing variants powerpc into variants |
---|
42 | DEBUG: new fully merged portvariants: |
---|
43 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
---|
44 | DEBUG: OS Platform: darwin |
---|
45 | DEBUG: OS Version: 9.8.0 |
---|
46 | DEBUG: Mac OS X Version: 10.5 |
---|
47 | DEBUG: System Arch: powerpc |
---|
48 | DEBUG: setting option os.universal_supported to yes |
---|
49 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
50 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
51 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
52 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
53 | DEBUG: universal variant already exists, so not adding the default one |
---|
54 | DEBUG: Requested variant darwin is not provided by port gmp. |
---|
55 | DEBUG: Requested variant macosx is not provided by port gmp. |
---|
56 | DEBUG: Executing variant powerpc provides powerpc |
---|
57 | DEBUG: No need to upgrade! gmp 4.3.1_1 >= gmp 4.3.1_1 |
---|
58 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
---|
59 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
60 | DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree |
---|
61 | DEBUG: mpfr 2.4.2-p1_0 is the latest installed |
---|
62 | DEBUG: mpfr 2.4.2-p1_0 is active |
---|
63 | DEBUG: Merging existing variants into variants |
---|
64 | DEBUG: new fully merged portvariants: |
---|
65 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
---|
66 | DEBUG: OS Platform: darwin |
---|
67 | DEBUG: OS Version: 9.8.0 |
---|
68 | DEBUG: Mac OS X Version: 10.5 |
---|
69 | DEBUG: System Arch: powerpc |
---|
70 | DEBUG: setting option os.universal_supported to yes |
---|
71 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
72 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
73 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
74 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
75 | DEBUG: universal variant already exists, so not adding the default one |
---|
76 | DEBUG: Requested variant powerpc is not provided by port mpfr. |
---|
77 | DEBUG: Requested variant darwin is not provided by port mpfr. |
---|
78 | DEBUG: Requested variant macosx is not provided by port mpfr. |
---|
79 | DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0 |
---|
80 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
81 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
82 | DEBUG: libiconv 1.13_0 exists in the ports tree |
---|
83 | DEBUG: libiconv 1.13_0 is the latest installed |
---|
84 | DEBUG: libiconv 1.13_0 is active |
---|
85 | DEBUG: Merging existing variants into variants |
---|
86 | DEBUG: new fully merged portvariants: |
---|
87 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
88 | DEBUG: OS Platform: darwin |
---|
89 | DEBUG: OS Version: 9.8.0 |
---|
90 | DEBUG: Mac OS X Version: 10.5 |
---|
91 | DEBUG: System Arch: powerpc |
---|
92 | DEBUG: setting option os.universal_supported to yes |
---|
93 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
94 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
95 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
96 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
97 | DEBUG: universal variant already exists, so not adding the default one |
---|
98 | DEBUG: Requested variant powerpc is not provided by port libiconv. |
---|
99 | DEBUG: Requested variant darwin is not provided by port libiconv. |
---|
100 | DEBUG: Requested variant macosx is not provided by port libiconv. |
---|
101 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
102 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
103 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
---|
104 | DEBUG: gperf 3.0.4_0 is the latest installed |
---|
105 | DEBUG: gperf 3.0.4_0 is active |
---|
106 | DEBUG: Merging existing variants into variants |
---|
107 | DEBUG: new fully merged portvariants: |
---|
108 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
109 | DEBUG: OS Platform: darwin |
---|
110 | DEBUG: OS Version: 9.8.0 |
---|
111 | DEBUG: Mac OS X Version: 10.5 |
---|
112 | DEBUG: System Arch: powerpc |
---|
113 | DEBUG: setting option os.universal_supported to yes |
---|
114 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
115 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
116 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
117 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
118 | DEBUG: universal variant already exists, so not adding the default one |
---|
119 | DEBUG: Requested variant powerpc is not provided by port gperf. |
---|
120 | DEBUG: Requested variant darwin is not provided by port gperf. |
---|
121 | DEBUG: Requested variant macosx is not provided by port gperf. |
---|
122 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
---|
123 | DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 |
---|
124 | DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0 |
---|
125 | ---> Computing dependencies for emos |
---|
126 | DEBUG: Searching for dependency: gcc43 |
---|
127 | DEBUG: Found Dependency: receipt exists for gcc43 |
---|
128 | DEBUG: Executing org.macports.main (emos) |
---|
129 | DEBUG: Skipping completed org.macports.fetch (emos) |
---|
130 | DEBUG: Skipping completed org.macports.checksum (emos) |
---|
131 | DEBUG: Skipping completed org.macports.extract (emos) |
---|
132 | DEBUG: Skipping completed org.macports.patch (emos) |
---|
133 | DEBUG: Skipping completed org.macports.configure (emos) |
---|
134 | ---> Building emos |
---|
135 | DEBUG: Executing org.macports.build (emos) |
---|
136 | DEBUG: port disallows a parallel build |
---|
137 | DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' |
---|
138 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_emos/work/emos_000371" && /usr/bin/make all' |
---|
139 | ************************* |
---|
140 | *** Make in gribex |
---|
141 | ************************* |
---|
142 | make[1]: Nothing to be done for `all'. |
---|
143 | ************************* |
---|
144 | *** Make in interpolation |
---|
145 | ************************* |
---|
146 | /opt/local/bin/gfortran-mp-4.3 -O2 -fdefault-real-8 -fcray-pointer -fno-second-underscore -DPOINTER_64 -DINTEGER_IS_INT -Dlinux -Dgfortran -c hntfaps.F |
---|
147 | hntfaps.F:448.31: |
---|
148 | |
---|
149 | ZNFELDI(LOOP) = SNGL(DATA(LOOP)) |
---|
150 | 1 |
---|
151 | Error: Type of argument 'a' in call to 'sngl' at (1) should be REAL(16), not REAL(8) |
---|
152 | make[1]: *** [hntfaps.o] Error 1 |
---|
153 | ************************* |
---|
154 | *** Make in bufrdc |
---|
155 | ************************* |
---|
156 | /opt/local/bin/gfortran-mp-4.3 -O2 -fdefault-real-8 -fcray-pointer -fno-second-underscore -DPOINTER_64 -DINTEGER_IS_INT -Dlinux -Dgfortran -c buens4.F |
---|
157 | buens4.F:142.32: |
---|
158 | |
---|
159 | R8=1.7976931348623157D+308 |
---|
160 | 1 |
---|
161 | Error: Real constant overflows its kind at (1) |
---|
162 | make[1]: *** [buens4.o] Error 1 |
---|
163 | ************************* |
---|
164 | *** Make in crexdc |
---|
165 | ************************* |
---|
166 | make[1]: Nothing to be done for `all'. |
---|
167 | ************************* |
---|
168 | *** Make in pbio |
---|
169 | ************************* |
---|
170 | make[1]: Nothing to be done for `all'. |
---|
171 | ************************* |
---|
172 | *** Make in fft |
---|
173 | ************************* |
---|
174 | make[1]: Nothing to be done for `all'. |
---|
175 | ************************* |
---|
176 | *** Make in bufrtables |
---|
177 | ************************* |
---|
178 | ./links.sh |
---|
179 | /opt/local/bin/gfortran-mp-4.3 -O2 -fdefault-real-8 -fcray-pointer -fno-second-underscore -DPOINTER_64 -DINTEGER_IS_INT -Dlinux -Dgfortran -o bufr2txt_tables bufr2txt_tables.f ../libemosR64.a |
---|
180 | Undefined symbols: |
---|
181 | "_busel_", referenced from: |
---|
182 | _MAIN__ in ccMRNcUq.o |
---|
183 | "_bufrex_", referenced from: |
---|
184 | _MAIN__ in ccMRNcUq.o |
---|
185 | "_bus012_", referenced from: |
---|
186 | _MAIN__ in ccMRNcUq.o |
---|
187 | ld: symbol(s) not found |
---|
188 | collect2: ld returned 1 exit status |
---|
189 | make[1]: *** [bufr2txt_tables] Error 1 |
---|
190 | make: *** [all] Error 2 |
---|
191 | Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_emos/work/emos_000371" && /usr/bin/make all " returned error 2 |
---|
192 | DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_emos/work/emos_000371" && /usr/bin/make all " returned error 2 |
---|
193 | while executing |
---|
194 | "command_exec build" |
---|
195 | (procedure "portbuild::build_main" line 9) |
---|
196 | invoked from within |
---|
197 | "$procedure $targetname" |
---|
198 | Warning: the following items did not execute (for emos): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
---|
199 | Error: Status 1 encountered during processing. |
---|
200 | To report a bug, see <http://guide.macports.org/#project.tickets> |
---|