Ticket #23887: PIKLAB-Debug-snow-leopard

File PIKLAB-Debug-snow-leopard, 143.8 KB (added by m.v.d.bilt@…, 15 years ago)

Debug of the installation

Line 
1MacBook:gpsim-0.24.0 marcel$ sudo port install -d piklab
2Password:
3--->  Computing dependencies for piklab
4--->  Configuring piklab
5Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_piklab/work/piklab-0.15.4" && ./configure --prefix=/opt/local QTDIR=/opt/local/lib/qt3 --without-arts " returned error 1
6Command output: configure: WARNING:
7There is an installation error in jpeg support. You seem to have only one
8of either the headers _or_ the libraries installed. You may need to either
9provide correct --with-extra-... options, or the development package of
10libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
11Disabling JPEG support.
12
13checking for perl... /opt/local/bin/perl
14checking for Qt... libraries /opt/local/lib/qt3/lib, headers /opt/local/lib/qt3/include using -mt
15checking for moc... /opt/local/lib/qt3/bin/moc
16checking for uic... /opt/local/lib/qt3/bin/uic
17checking whether uic supports -L ... yes
18checking whether uic supports -nounload ... yes
19yes
20checking for rpath... yes
21checking for KDE... libraries /opt/local/lib, headers /opt/local/include
22checking if UIC has KDE plugins available... yes
23checking for KDE paths... defaults
24checking for dcopidl... /opt/local/bin/dcopidl
25checking for dcopidl2cpp... /opt/local/bin/dcopidl2cpp
26checking for meinproc... /opt/local/bin/meinproc
27checking for xmllint... /opt/local/bin/xmllint
28checking whether byte ordering is bigendian... no
29checking for parport header/ppdev.h... no
30checking for ppbus header/ppi.h... no
31checking for libusb-config... yes
32checking usb.h usability... yes
33checking usb.h presence... yes
34checking for usb.h... yes
35checking for usb_init... configure: error: libusb not found, use ./configure LIBUSB_LIBS=...
36
37Error: Status 1 encountered during processing.
38Before reporting a bug, first run the command again with the -d flag to get complete output.
39MacBook:gpsim-0.24.0 marcel$ sudo port -d install piklab
40Password:
41DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/piklab
42DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/piklab
43DEBUG: OS Platform: darwin
44DEBUG: OS Version: 10.2.0
45DEBUG: Mac OS X Version: 10.6
46DEBUG: System Arch: i386
47DEBUG: setting option os.universal_supported to yes
48DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
49DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
50DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
51DEBUG: adding the default universal variant
52DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
53DEBUG: Requested variant darwin is not provided by port piklab.
54DEBUG: Requested variant i386 is not provided by port piklab.
55DEBUG: Requested variant macosx is not provided by port piklab.
56DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
57DEBUG: epoch: in tree: 0 installed: 0
58DEBUG: kdelibs3 3.5.10_3 exists in the ports tree
59DEBUG: kdelibs3 3.5.10_3  is the latest installed
60DEBUG: kdelibs3 3.5.10_3  is active
61DEBUG: Merging existing variants  into variants
62DEBUG: new fully merged portvariants:
63DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
64DEBUG: OS Platform: darwin
65DEBUG: OS Version: 10.2.0
66DEBUG: Mac OS X Version: 10.6
67DEBUG: System Arch: i386
68DEBUG: setting option os.universal_supported to yes
69DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
70DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
71DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
72DEBUG: 'universal_variant no' specified, so not adding the default universal variant
73DEBUG: Requested variant darwin is not provided by port kdelibs3.
74DEBUG: Requested variant i386 is not provided by port kdelibs3.
75DEBUG: Requested variant macosx is not provided by port kdelibs3.
76DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
77DEBUG: epoch: in tree: 0 installed: 0
78DEBUG: autoconf263 2.63_0 exists in the ports tree
79DEBUG: autoconf263 2.63_0  is the latest installed
80DEBUG: autoconf263 2.63_0  is active
81DEBUG: Merging existing variants  into variants
82DEBUG: new fully merged portvariants:
83DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
84DEBUG: OS Platform: darwin
85DEBUG: OS Version: 10.2.0
86DEBUG: Mac OS X Version: 10.6
87DEBUG: System Arch: i386
88DEBUG: setting option os.universal_supported to yes
89DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
90DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
91DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
92DEBUG: 'universal_variant no' specified, so not adding the default universal variant
93DEBUG: Requested variant darwin is not provided by port autoconf263.
94DEBUG: Requested variant i386 is not provided by port autoconf263.
95DEBUG: Requested variant macosx is not provided by port autoconf263.
96DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
97DEBUG: epoch: in tree: 0 installed: 0
98DEBUG: perl5 5.8.9_0 exists in the ports tree
99DEBUG: perl5 5.8.9_0  is the latest installed
100DEBUG: perl5 5.8.9_0  is active
101DEBUG: Merging existing variants  into variants
102DEBUG: new fully merged portvariants:
103DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
104DEBUG: OS Platform: darwin
105DEBUG: OS Version: 10.2.0
106DEBUG: Mac OS X Version: 10.6
107DEBUG: System Arch: i386
108DEBUG: setting option os.universal_supported to yes
109DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
110DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
111DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
112DEBUG: 'universal_variant no' specified, so not adding the default universal variant
113DEBUG: Requested variant darwin is not provided by port perl5.
114DEBUG: Requested variant i386 is not provided by port perl5.
115DEBUG: Requested variant macosx is not provided by port perl5.
116DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
117DEBUG: epoch: in tree: 0 installed: 0
118DEBUG: perl5.8 5.8.9_3 exists in the ports tree
119DEBUG: perl5.8 5.8.9_3 +universal is the latest installed
120DEBUG: perl5.8 5.8.9_3 +universal is active
121DEBUG: Merging existing variants universal into variants
122DEBUG: new fully merged portvariants: universal +
123DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
124DEBUG: OS Platform: darwin
125DEBUG: OS Version: 10.2.0
126DEBUG: Mac OS X Version: 10.6
127DEBUG: System Arch: i386
128DEBUG: setting option os.universal_supported to yes
129DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
130DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
131DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
132DEBUG: adding the default universal variant
133DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
134DEBUG: Requested variant darwin is not provided by port perl5.8.
135DEBUG: Requested variant i386 is not provided by port perl5.8.
136DEBUG: Requested variant macosx is not provided by port perl5.8.
137DEBUG: Executing variant universal provides universal
138DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
139DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
140DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
141DEBUG: epoch: in tree: 0 installed: 0
142DEBUG: m4 1.4.13_0 exists in the ports tree
143DEBUG: m4 1.4.13_0  is the latest installed
144DEBUG: m4 1.4.13_0  is active
145DEBUG: Merging existing variants  into variants
146DEBUG: new fully merged portvariants:
147DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
148DEBUG: OS Platform: darwin
149DEBUG: OS Version: 10.2.0
150DEBUG: Mac OS X Version: 10.6
151DEBUG: System Arch: i386
152DEBUG: setting option os.universal_supported to yes
153DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
154DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
155DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
156DEBUG: adding the default universal variant
157DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
158DEBUG: Requested variant darwin is not provided by port m4.
159DEBUG: Requested variant i386 is not provided by port m4.
160DEBUG: Requested variant macosx is not provided by port m4.
161DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
162DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
163DEBUG: epoch: in tree: 0 installed: 0
164DEBUG: help2man 1.37.1_1 exists in the ports tree
165DEBUG: help2man 1.37.1_1  is the latest installed
166DEBUG: help2man 1.37.1_1  is active
167DEBUG: Merging existing variants  into variants
168DEBUG: new fully merged portvariants:
169DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
170DEBUG: OS Platform: darwin
171DEBUG: OS Version: 10.2.0
172DEBUG: Mac OS X Version: 10.6
173DEBUG: System Arch: i386
174DEBUG: setting option os.universal_supported to yes
175DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
176DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
177DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
178DEBUG: adding the default universal variant
179DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
180DEBUG: Requested variant darwin is not provided by port help2man.
181DEBUG: Requested variant i386 is not provided by port help2man.
182DEBUG: Requested variant macosx is not provided by port help2man.
183DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
184DEBUG: epoch: in tree: 0 installed: 0
185DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
186DEBUG: p5-locale-gettext 1.05_2  is the latest installed
187DEBUG: p5-locale-gettext 1.05_2  is active
188DEBUG: Merging existing variants  into variants
189DEBUG: new fully merged portvariants:
190DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
191DEBUG: OS Platform: darwin
192DEBUG: OS Version: 10.2.0
193DEBUG: Mac OS X Version: 10.6
194DEBUG: System Arch: i386
195DEBUG: setting option os.universal_supported to yes
196DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
197DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
198DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
199DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
200DEBUG: 'universal_variant no' specified, so not adding the default universal variant
201DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
202DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
203DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
204DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
205DEBUG: epoch: in tree: 0 installed: 0
206DEBUG: gettext 0.17_4 exists in the ports tree
207DEBUG: gettext 0.17_4 +universal is the latest installed
208DEBUG: gettext 0.17_4 +universal is active
209DEBUG: Merging existing variants universal into variants
210DEBUG: new fully merged portvariants: universal +
211DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
212DEBUG: OS Platform: darwin
213DEBUG: OS Version: 10.2.0
214DEBUG: Mac OS X Version: 10.6
215DEBUG: System Arch: i386
216DEBUG: setting option os.universal_supported to yes
217DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
218DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
219DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
220DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
221DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
222DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
223DEBUG: universal variant already exists, so not adding the default one
224DEBUG: Requested variant darwin is not provided by port gettext.
225DEBUG: Requested variant i386 is not provided by port gettext.
226DEBUG: Requested variant macosx is not provided by port gettext.
227DEBUG: Executing variant universal provides universal
228DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
229DEBUG: epoch: in tree: 0 installed: 0
230DEBUG: libiconv 1.13.1_0 exists in the ports tree
231DEBUG: libiconv 1.13.1_0 +universal is the latest installed
232DEBUG: libiconv 1.13.1_0 +universal is active
233DEBUG: Merging existing variants universal into variants
234DEBUG: new fully merged portvariants: universal +
235DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
236DEBUG: OS Platform: darwin
237DEBUG: OS Version: 10.2.0
238DEBUG: Mac OS X Version: 10.6
239DEBUG: System Arch: i386
240DEBUG: setting option os.universal_supported to yes
241DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
242DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
243DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
244DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
245DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
246DEBUG: universal variant already exists, so not adding the default one
247DEBUG: Requested variant darwin is not provided by port libiconv.
248DEBUG: Requested variant i386 is not provided by port libiconv.
249DEBUG: Requested variant macosx is not provided by port libiconv.
250DEBUG: Executing variant universal provides universal
251DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
252DEBUG: epoch: in tree: 0 installed: 0
253DEBUG: gperf 3.0.4_0 exists in the ports tree
254DEBUG: gperf 3.0.4_0 +universal is the latest installed
255DEBUG: gperf 3.0.4_0 +universal is active
256DEBUG: Merging existing variants universal into variants
257DEBUG: new fully merged portvariants: universal +
258DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
259DEBUG: OS Platform: darwin
260DEBUG: OS Version: 10.2.0
261DEBUG: Mac OS X Version: 10.6
262DEBUG: System Arch: i386
263DEBUG: setting option os.universal_supported to yes
264DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
265DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
266DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
267DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
268DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
269DEBUG: universal variant already exists, so not adding the default one
270DEBUG: Requested variant darwin is not provided by port gperf.
271DEBUG: Requested variant i386 is not provided by port gperf.
272DEBUG: Requested variant macosx is not provided by port gperf.
273DEBUG: Executing variant universal provides universal
274DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
275DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
276DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
277DEBUG: epoch: in tree: 0 installed: 0
278DEBUG: ncurses 5.7_0 exists in the ports tree
279DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed
280DEBUG: ncurses 5.7_0 +darwin_10+universal is active
281DEBUG: Merging existing variants darwin_10 universal into variants
282DEBUG: new fully merged portvariants: universal +
283DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
284DEBUG: OS Platform: darwin
285DEBUG: OS Version: 10.2.0
286DEBUG: Mac OS X Version: 10.6
287DEBUG: System Arch: i386
288DEBUG: setting option os.universal_supported to yes
289DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
290DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
291DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
292DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
293DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
294DEBUG: universal variant already exists, so not adding the default one
295DEBUG: Requested variant darwin is not provided by port ncurses.
296DEBUG: Requested variant i386 is not provided by port ncurses.
297DEBUG: Requested variant macosx is not provided by port ncurses.
298DEBUG: Executing variant universal provides universal
299DEBUG: Executing variant darwin_10 provides darwin_10
300DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
301DEBUG: epoch: in tree: 0 installed: 0
302DEBUG: ncursesw 5.7_0 exists in the ports tree
303DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed
304DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
305DEBUG: Merging existing variants darwin_10 universal into variants
306DEBUG: new fully merged portvariants: universal +
307DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
308DEBUG: OS Platform: darwin
309DEBUG: OS Version: 10.2.0
310DEBUG: Mac OS X Version: 10.6
311DEBUG: System Arch: i386
312DEBUG: setting option os.universal_supported to yes
313DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
314DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
315DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
316DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
317DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
318DEBUG: universal variant already exists, so not adding the default one
319DEBUG: Requested variant darwin is not provided by port ncursesw.
320DEBUG: Requested variant i386 is not provided by port ncursesw.
321DEBUG: Requested variant macosx is not provided by port ncursesw.
322DEBUG: Executing variant universal provides universal
323DEBUG: Executing variant darwin_10 provides darwin_10
324DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
325DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
326DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
327DEBUG: epoch: in tree: 0 installed: 0
328DEBUG: expat 2.0.1_0 exists in the ports tree
329DEBUG: expat 2.0.1_0 +universal is the latest installed
330DEBUG: expat 2.0.1_0 +universal is active
331DEBUG: Merging existing variants universal into variants
332DEBUG: new fully merged portvariants: universal +
333DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
334DEBUG: OS Platform: darwin
335DEBUG: OS Version: 10.2.0
336DEBUG: Mac OS X Version: 10.6
337DEBUG: System Arch: i386
338DEBUG: setting option os.universal_supported to yes
339DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
340DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
341DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
342DEBUG: adding the default universal variant
343DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
344DEBUG: Requested variant darwin is not provided by port expat.
345DEBUG: Requested variant i386 is not provided by port expat.
346DEBUG: Requested variant macosx is not provided by port expat.
347DEBUG: Executing variant universal provides universal
348DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
349DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
350DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
351DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
352DEBUG: No need to upgrade! autoconf263 2.63_0 >= autoconf263 2.63_0
353DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
354DEBUG: epoch: in tree: 0 installed: 0
355DEBUG: pkgconfig 0.23_1 exists in the ports tree
356DEBUG: pkgconfig 0.23_1  is the latest installed
357DEBUG: pkgconfig 0.23_1  is active
358DEBUG: Merging existing variants  into variants
359DEBUG: new fully merged portvariants:
360DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
361DEBUG: OS Platform: darwin
362DEBUG: OS Version: 10.2.0
363DEBUG: Mac OS X Version: 10.6
364DEBUG: System Arch: i386
365DEBUG: setting option os.universal_supported to yes
366DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
367DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
368DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
369DEBUG: adding the default universal variant
370DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
371DEBUG: Requested variant darwin is not provided by port pkgconfig.
372DEBUG: Requested variant i386 is not provided by port pkgconfig.
373DEBUG: Requested variant macosx is not provided by port pkgconfig.
374DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
375DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
376DEBUG: epoch: in tree: 0 installed: 0
377DEBUG: unsermake 0.4-20070824_2 exists in the ports tree
378DEBUG: unsermake 0.4-20070824_2  is the latest installed
379DEBUG: unsermake 0.4-20070824_2  is active
380DEBUG: Merging existing variants  into variants
381DEBUG: new fully merged portvariants:
382DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
383DEBUG: OS Platform: darwin
384DEBUG: OS Version: 10.2.0
385DEBUG: Mac OS X Version: 10.6
386DEBUG: System Arch: i386
387DEBUG: setting option os.universal_supported to yes
388DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
389DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
390DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
391DEBUG: not using configure, so not adding the default universal variant
392DEBUG: Requested variant darwin is not provided by port unsermake.
393DEBUG: Requested variant i386 is not provided by port unsermake.
394DEBUG: Requested variant macosx is not provided by port unsermake.
395DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
396DEBUG: epoch: in tree: 0 installed: 0
397DEBUG: python26 2.6.4_0 exists in the ports tree
398DEBUG: python26 2.6.4_0 +darwin is the latest installed
399DEBUG: python26 2.6.4_0 +darwin is active
400DEBUG: Merging existing variants darwin into variants
401DEBUG: new fully merged portvariants:
402DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
403DEBUG: OS Platform: darwin
404DEBUG: OS Version: 10.2.0
405DEBUG: Mac OS X Version: 10.6
406DEBUG: System Arch: i386
407DEBUG: setting option os.universal_supported to yes
408DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
409DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
410DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
411DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
412DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
413DEBUG: universal variant already exists, so not adding the default one
414DEBUG: Requested variant i386 is not provided by port python26.
415DEBUG: Requested variant macosx is not provided by port python26.
416DEBUG: Executing variant darwin provides darwin
417DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
418DEBUG: epoch: in tree: 0 installed: 0
419DEBUG: zlib 1.2.3_4 exists in the ports tree
420DEBUG: zlib 1.2.3_4  is the latest installed
421DEBUG: zlib 1.2.3_4  is active
422DEBUG: Merging existing variants  into variants
423DEBUG: new fully merged portvariants:
424DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
425DEBUG: OS Platform: darwin
426DEBUG: OS Version: 10.2.0
427DEBUG: Mac OS X Version: 10.6
428DEBUG: System Arch: i386
429DEBUG: setting option os.universal_supported to yes
430DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
431DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
432DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
433DEBUG: adding the default universal variant
434DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
435DEBUG: Requested variant darwin is not provided by port zlib.
436DEBUG: Requested variant i386 is not provided by port zlib.
437DEBUG: Requested variant macosx is not provided by port zlib.
438DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
439DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
440DEBUG: epoch: in tree: 1 installed: 1
441DEBUG: openssl 0.9.8l_0 exists in the ports tree
442DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
443DEBUG: openssl 0.9.8l_0 +darwin is active
444DEBUG: Merging existing variants darwin into variants
445DEBUG: new fully merged portvariants:
446DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
447DEBUG: OS Platform: darwin
448DEBUG: OS Version: 10.2.0
449DEBUG: Mac OS X Version: 10.6
450DEBUG: System Arch: i386
451DEBUG: setting option os.universal_supported to yes
452DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
453DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
454DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
455DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
456DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
457DEBUG: universal variant already exists, so not adding the default one
458DEBUG: Requested variant i386 is not provided by port openssl.
459DEBUG: Requested variant macosx is not provided by port openssl.
460DEBUG: Executing variant darwin provides darwin
461DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
462DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
463DEBUG: epoch: in tree: 0 installed: 0
464DEBUG: tk 8.5.8_0 exists in the ports tree
465DEBUG: tk 8.5.8_0 +darwin is the latest installed
466DEBUG: tk 8.5.8_0 +darwin is active
467DEBUG: Merging existing variants darwin into variants
468DEBUG: new fully merged portvariants:
469DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
470DEBUG: OS Platform: darwin
471DEBUG: OS Version: 10.2.0
472DEBUG: Mac OS X Version: 10.6
473DEBUG: System Arch: i386
474DEBUG: setting option os.universal_supported to yes
475DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
476DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
477DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
478DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
479DEBUG: adding the default universal variant
480DEBUG: Requested variant i386 is not provided by port tk.
481DEBUG: Requested variant macosx is not provided by port tk.
482DEBUG: Executing variant darwin provides darwin
483DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
484DEBUG: epoch: in tree: 0 installed: 0
485DEBUG: tcl 8.5.8_0 exists in the ports tree
486DEBUG: tcl 8.5.8_0 +darwin is the latest installed
487DEBUG: tcl 8.5.8_0 +darwin is active
488DEBUG: Merging existing variants darwin into variants
489DEBUG: new fully merged portvariants:
490DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
491DEBUG: OS Platform: darwin
492DEBUG: OS Version: 10.2.0
493DEBUG: Mac OS X Version: 10.6
494DEBUG: System Arch: i386
495DEBUG: setting option os.universal_supported to yes
496DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
497DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
498DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
499DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
500DEBUG: adding the default universal variant
501DEBUG: Requested variant i386 is not provided by port tcl.
502DEBUG: Requested variant macosx is not provided by port tcl.
503DEBUG: Executing variant darwin provides darwin
504DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
505DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
506DEBUG: epoch: in tree: 0 installed: 0
507DEBUG: Xft2 2.1.14_0 exists in the ports tree
508DEBUG: Xft2 2.1.14_0  is the latest installed
509DEBUG: Xft2 2.1.14_0  is active
510DEBUG: Merging existing variants  into variants
511DEBUG: new fully merged portvariants:
512DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
513DEBUG: OS Platform: darwin
514DEBUG: OS Version: 10.2.0
515DEBUG: Mac OS X Version: 10.6
516DEBUG: System Arch: i386
517DEBUG: setting option os.universal_supported to yes
518DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
519DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
520DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
521DEBUG: adding the default universal variant
522DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
523DEBUG: Requested variant darwin is not provided by port Xft2.
524DEBUG: Requested variant i386 is not provided by port Xft2.
525DEBUG: Requested variant macosx is not provided by port Xft2.
526DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
527DEBUG: epoch: in tree: 0 installed: 0
528DEBUG: xrender 0.9.5_0 exists in the ports tree
529DEBUG: xrender 0.9.5_0  is the latest installed
530DEBUG: xrender 0.9.5_0  is active
531DEBUG: Merging existing variants  into variants
532DEBUG: new fully merged portvariants:
533DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
534DEBUG: OS Platform: darwin
535DEBUG: OS Version: 10.2.0
536DEBUG: Mac OS X Version: 10.6
537DEBUG: System Arch: i386
538DEBUG: setting option os.universal_supported to yes
539DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
540DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
541DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
542DEBUG: adding the default universal variant
543DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
544DEBUG: Requested variant darwin is not provided by port xrender.
545DEBUG: Requested variant i386 is not provided by port xrender.
546DEBUG: Requested variant macosx is not provided by port xrender.
547DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
548DEBUG: epoch: in tree: 0 installed: 0
549DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
550DEBUG: xorg-libX11 1.3.3_0  is the latest installed
551DEBUG: xorg-libX11 1.3.3_0  is active
552DEBUG: Merging existing variants  into variants
553DEBUG: new fully merged portvariants:
554DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
555DEBUG: OS Platform: darwin
556DEBUG: OS Version: 10.2.0
557DEBUG: Mac OS X Version: 10.6
558DEBUG: System Arch: i386
559DEBUG: setting option os.universal_supported to yes
560DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
561DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
562DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
563DEBUG: adding the default universal variant
564DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
565DEBUG: Requested variant darwin is not provided by port xorg-libX11.
566DEBUG: Requested variant i386 is not provided by port xorg-libX11.
567DEBUG: Requested variant macosx is not provided by port xorg-libX11.
568DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
569DEBUG: epoch: in tree: 0 installed: 0
570DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
571DEBUG: xorg-util-macros 1.6.0_0  is the latest installed
572DEBUG: xorg-util-macros 1.6.0_0  is active
573DEBUG: Merging existing variants  into variants
574DEBUG: new fully merged portvariants:
575DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
576DEBUG: OS Platform: darwin
577DEBUG: OS Version: 10.2.0
578DEBUG: Mac OS X Version: 10.6
579DEBUG: System Arch: i386
580DEBUG: setting option os.universal_supported to yes
581DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
582DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
583DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
584DEBUG: 'universal_variant no' specified, so not adding the default universal variant
585DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
586DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
587DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
588DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros 1.6.0_0
589DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
590DEBUG: epoch: in tree: 0 installed: 0
591DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
592DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
593DEBUG: xorg-xtrans 1.2.5_0  is active
594DEBUG: Merging existing variants  into variants
595DEBUG: new fully merged portvariants:
596DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
597DEBUG: OS Platform: darwin
598DEBUG: OS Version: 10.2.0
599DEBUG: Mac OS X Version: 10.6
600DEBUG: System Arch: i386
601DEBUG: setting option os.universal_supported to yes
602DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
603DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
604DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
605DEBUG: 'universal_variant no' specified, so not adding the default universal variant
606DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
607DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
608DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
609DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
610DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
611DEBUG: epoch: in tree: 0 installed: 0
612DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
613DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
614DEBUG: xorg-bigreqsproto 1.1.0_0  is active
615DEBUG: Merging existing variants  into variants
616DEBUG: new fully merged portvariants:
617DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
618DEBUG: OS Platform: darwin
619DEBUG: OS Version: 10.2.0
620DEBUG: Mac OS X Version: 10.6
621DEBUG: System Arch: i386
622DEBUG: setting option os.universal_supported to yes
623DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
624DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
625DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
626DEBUG: 'universal_variant no' specified, so not adding the default universal variant
627DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
628DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
629DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
630DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
631DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
632DEBUG: epoch: in tree: 0 installed: 0
633DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
634DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
635DEBUG: xorg-xcmiscproto 1.2.0_0  is active
636DEBUG: Merging existing variants  into variants
637DEBUG: new fully merged portvariants:
638DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
639DEBUG: OS Platform: darwin
640DEBUG: OS Version: 10.2.0
641DEBUG: Mac OS X Version: 10.6
642DEBUG: System Arch: i386
643DEBUG: setting option os.universal_supported to yes
644DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
645DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
646DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
647DEBUG: 'universal_variant no' specified, so not adding the default universal variant
648DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
649DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
650DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
651DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
652DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
653DEBUG: epoch: in tree: 0 installed: 0
654DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
655DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
656DEBUG: xorg-xextproto 7.1.1_0  is active
657DEBUG: Merging existing variants  into variants
658DEBUG: new fully merged portvariants:
659DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
660DEBUG: OS Platform: darwin
661DEBUG: OS Version: 10.2.0
662DEBUG: Mac OS X Version: 10.6
663DEBUG: System Arch: i386
664DEBUG: setting option os.universal_supported to yes
665DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
666DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
667DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
668DEBUG: 'universal_variant no' specified, so not adding the default universal variant
669DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
670DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
671DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
672DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
673DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
674DEBUG: epoch: in tree: 0 installed: 0
675DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
676DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
677DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
678DEBUG: Merging existing variants  into variants
679DEBUG: new fully merged portvariants:
680DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
681DEBUG: OS Platform: darwin
682DEBUG: OS Version: 10.2.0
683DEBUG: Mac OS X Version: 10.6
684DEBUG: System Arch: i386
685DEBUG: setting option os.universal_supported to yes
686DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
687DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
688DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
689DEBUG: 'universal_variant no' specified, so not adding the default universal variant
690DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
691DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
692DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
693DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
694DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
695DEBUG: epoch: in tree: 0 installed: 0
696DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
697DEBUG: xorg-inputproto 2.0_0  is the latest installed
698DEBUG: xorg-inputproto 2.0_0  is active
699DEBUG: Merging existing variants  into variants
700DEBUG: new fully merged portvariants:
701DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
702DEBUG: OS Platform: darwin
703DEBUG: OS Version: 10.2.0
704DEBUG: Mac OS X Version: 10.6
705DEBUG: System Arch: i386
706DEBUG: setting option os.universal_supported to yes
707DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
708DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
709DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
710DEBUG: 'universal_variant no' specified, so not adding the default universal variant
711DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
712DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
713DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
714DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
715DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
716DEBUG: epoch: in tree: 0 installed: 0
717DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
718DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
719DEBUG: xorg-libXdmcp 1.0.3_0  is active
720DEBUG: Merging existing variants  into variants
721DEBUG: new fully merged portvariants:
722DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
723DEBUG: OS Platform: darwin
724DEBUG: OS Version: 10.2.0
725DEBUG: Mac OS X Version: 10.6
726DEBUG: System Arch: i386
727DEBUG: setting option os.universal_supported to yes
728DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
729DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
730DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
731DEBUG: adding the default universal variant
732DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
733DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
734DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
735DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
736DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
737DEBUG: epoch: in tree: 0 installed: 0
738DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
739DEBUG: xorg-xproto 7.0.16_0  is the latest installed
740DEBUG: xorg-xproto 7.0.16_0  is active
741DEBUG: Merging existing variants  into variants
742DEBUG: new fully merged portvariants:
743DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
744DEBUG: OS Platform: darwin
745DEBUG: OS Version: 10.2.0
746DEBUG: Mac OS X Version: 10.6
747DEBUG: System Arch: i386
748DEBUG: setting option os.universal_supported to yes
749DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
750DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
751DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
752DEBUG: 'universal_variant no' specified, so not adding the default universal variant
753DEBUG: Requested variant darwin is not provided by port xorg-xproto.
754DEBUG: Requested variant i386 is not provided by port xorg-xproto.
755DEBUG: Requested variant macosx is not provided by port xorg-xproto.
756DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
757DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
758DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
759DEBUG: epoch: in tree: 0 installed: 0
760DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
761DEBUG: xorg-libXau 1.0.5_0  is the latest installed
762DEBUG: xorg-libXau 1.0.5_0  is active
763DEBUG: Merging existing variants  into variants
764DEBUG: new fully merged portvariants:
765DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
766DEBUG: OS Platform: darwin
767DEBUG: OS Version: 10.2.0
768DEBUG: Mac OS X Version: 10.6
769DEBUG: System Arch: i386
770DEBUG: setting option os.universal_supported to yes
771DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
772DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
773DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
774DEBUG: adding the default universal variant
775DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
776DEBUG: Requested variant darwin is not provided by port xorg-libXau.
777DEBUG: Requested variant i386 is not provided by port xorg-libXau.
778DEBUG: Requested variant macosx is not provided by port xorg-libXau.
779DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
780DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
781DEBUG: epoch: in tree: 0 installed: 0
782DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
783DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
784DEBUG: xorg-kbproto 1.0.4_0  is active
785DEBUG: Merging existing variants  into variants
786DEBUG: new fully merged portvariants:
787DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
788DEBUG: OS Platform: darwin
789DEBUG: OS Version: 10.2.0
790DEBUG: Mac OS X Version: 10.6
791DEBUG: System Arch: i386
792DEBUG: setting option os.universal_supported to yes
793DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
794DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
795DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
796DEBUG: 'universal_variant no' specified, so not adding the default universal variant
797DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
798DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
799DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
800DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
801DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
802DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
803DEBUG: epoch: in tree: 0 installed: 0
804DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
805DEBUG: xorg-renderproto 0.11_0  is the latest installed
806DEBUG: xorg-renderproto 0.11_0  is active
807DEBUG: Merging existing variants  into variants
808DEBUG: new fully merged portvariants:
809DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
810DEBUG: OS Platform: darwin
811DEBUG: OS Version: 10.2.0
812DEBUG: Mac OS X Version: 10.6
813DEBUG: System Arch: i386
814DEBUG: setting option os.universal_supported to yes
815DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
816DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
817DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
818DEBUG: 'universal_variant no' specified, so not adding the default universal variant
819DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
820DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
821DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
822DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
823DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
824DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
825DEBUG: epoch: in tree: 0 installed: 0
826DEBUG: freetype 2.3.12_0 exists in the ports tree
827DEBUG: freetype 2.3.12_0 +macosx is the latest installed
828DEBUG: freetype 2.3.12_0 +macosx is active
829DEBUG: Merging existing variants macosx into variants
830DEBUG: new fully merged portvariants:
831DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
832DEBUG: OS Platform: darwin
833DEBUG: OS Version: 10.2.0
834DEBUG: Mac OS X Version: 10.6
835DEBUG: System Arch: i386
836DEBUG: setting option os.universal_supported to yes
837DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
838DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
839DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
840DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
841DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
842DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
843DEBUG: universal variant already exists, so not adding the default one
844DEBUG: Requested variant darwin is not provided by port freetype.
845DEBUG: Requested variant i386 is not provided by port freetype.
846DEBUG: Executing variant macosx provides macosx
847DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
848DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
849DEBUG: epoch: in tree: 0 installed: 0
850DEBUG: fontconfig 2.8.0_0 exists in the ports tree
851DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
852DEBUG: fontconfig 2.8.0_0 +macosx is active
853DEBUG: Merging existing variants macosx into variants
854DEBUG: new fully merged portvariants:
855DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
856DEBUG: OS Platform: darwin
857DEBUG: OS Version: 10.2.0
858DEBUG: Mac OS X Version: 10.6
859DEBUG: System Arch: i386
860DEBUG: setting option os.universal_supported to yes
861DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
862DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
863DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
864DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
865DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
866DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
867DEBUG: universal variant already exists, so not adding the default one
868DEBUG: Requested variant darwin is not provided by port fontconfig.
869DEBUG: Requested variant i386 is not provided by port fontconfig.
870DEBUG: Executing variant macosx provides macosx
871DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
872DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
873DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
874DEBUG: epoch: in tree: 0 installed: 0
875DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
876DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
877DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
878DEBUG: Merging existing variants  into variants
879DEBUG: new fully merged portvariants:
880DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
881DEBUG: OS Platform: darwin
882DEBUG: OS Version: 10.2.0
883DEBUG: Mac OS X Version: 10.6
884DEBUG: System Arch: i386
885DEBUG: setting option os.universal_supported to yes
886DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
887DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
888DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
889DEBUG: adding the default universal variant
890DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
891DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
892DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
893DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
894DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
895DEBUG: epoch: in tree: 0 installed: 0
896DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
897DEBUG: xorg-libXext 1.1.1_0  is the latest installed
898DEBUG: xorg-libXext 1.1.1_0  is active
899DEBUG: Merging existing variants  into variants
900DEBUG: new fully merged portvariants:
901DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
902DEBUG: OS Platform: darwin
903DEBUG: OS Version: 10.2.0
904DEBUG: Mac OS X Version: 10.6
905DEBUG: System Arch: i386
906DEBUG: setting option os.universal_supported to yes
907DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
908DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
909DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
910DEBUG: adding the default universal variant
911DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
912DEBUG: Requested variant darwin is not provided by port xorg-libXext.
913DEBUG: Requested variant i386 is not provided by port xorg-libXext.
914DEBUG: Requested variant macosx is not provided by port xorg-libXext.
915DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
916DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
917DEBUG: epoch: in tree: 0 installed: 0
918DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
919DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
920DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
921DEBUG: Merging existing variants  into variants
922DEBUG: new fully merged portvariants:
923DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
924DEBUG: OS Platform: darwin
925DEBUG: OS Version: 10.2.0
926DEBUG: Mac OS X Version: 10.6
927DEBUG: System Arch: i386
928DEBUG: setting option os.universal_supported to yes
929DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
930DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
931DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
932DEBUG: 'universal_variant no' specified, so not adding the default universal variant
933DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
934DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
935DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
936DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
937DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
938DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
939DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
940DEBUG: epoch: in tree: 0 installed: 0
941DEBUG: sqlite3 3.6.22_0 exists in the ports tree
942DEBUG: sqlite3 3.6.22_0  is the latest installed
943DEBUG: sqlite3 3.6.22_0  is active
944DEBUG: Merging existing variants  into variants
945DEBUG: new fully merged portvariants:
946DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
947DEBUG: OS Platform: darwin
948DEBUG: OS Version: 10.2.0
949DEBUG: Mac OS X Version: 10.6
950DEBUG: System Arch: i386
951DEBUG: setting option os.universal_supported to yes
952DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
953DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
954DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
955DEBUG: adding the default universal variant
956DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
957DEBUG: Requested variant darwin is not provided by port sqlite3.
958DEBUG: Requested variant i386 is not provided by port sqlite3.
959DEBUG: Requested variant macosx is not provided by port sqlite3.
960DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
961DEBUG: epoch: in tree: 0 installed: 0
962DEBUG: readline 6.1.000_1 exists in the ports tree
963DEBUG: readline 6.1.000_1 +darwin+universal is the latest installed
964DEBUG: readline 6.1.000_1 +darwin+universal is active
965DEBUG: Merging existing variants darwin universal into variants
966DEBUG: new fully merged portvariants: universal +
967DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
968DEBUG: OS Platform: darwin
969DEBUG: OS Version: 10.2.0
970DEBUG: Mac OS X Version: 10.6
971DEBUG: System Arch: i386
972DEBUG: setting option os.universal_supported to yes
973DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
974DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
975DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
976DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
977DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
978DEBUG: universal variant already exists, so not adding the default one
979DEBUG: Requested variant i386 is not provided by port readline.
980DEBUG: Requested variant macosx is not provided by port readline.
981DEBUG: Executing variant universal provides universal
982DEBUG: Executing variant darwin provides darwin
983DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
984DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
985DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
986DEBUG: epoch: in tree: 0 installed: 0
987DEBUG: db46 4.6.21_6 exists in the ports tree
988DEBUG: db46 4.6.21_6  is the latest installed
989DEBUG: db46 4.6.21_6  is active
990DEBUG: Merging existing variants  into variants
991DEBUG: new fully merged portvariants:
992DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
993DEBUG: OS Platform: darwin
994DEBUG: OS Version: 10.2.0
995DEBUG: Mac OS X Version: 10.6
996DEBUG: System Arch: i386
997DEBUG: setting option os.universal_supported to yes
998DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
999DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1000DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1001DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1002DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1003DEBUG: universal variant already exists, so not adding the default one
1004DEBUG: Requested variant darwin is not provided by port db46.
1005DEBUG: Requested variant i386 is not provided by port db46.
1006DEBUG: Requested variant macosx is not provided by port db46.
1007DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
1008DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
1009DEBUG: epoch: in tree: 0 installed: 0
1010DEBUG: gdbm 1.8.3_2 exists in the ports tree
1011DEBUG: gdbm 1.8.3_2  is the latest installed
1012DEBUG: gdbm 1.8.3_2  is active
1013DEBUG: Merging existing variants  into variants
1014DEBUG: new fully merged portvariants:
1015DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
1016DEBUG: OS Platform: darwin
1017DEBUG: OS Version: 10.2.0
1018DEBUG: Mac OS X Version: 10.6
1019DEBUG: System Arch: i386
1020DEBUG: setting option os.universal_supported to yes
1021DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1022DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1023DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1024DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1025DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1026DEBUG: universal variant already exists, so not adding the default one
1027DEBUG: Requested variant darwin is not provided by port gdbm.
1028DEBUG: Requested variant i386 is not provided by port gdbm.
1029DEBUG: Requested variant macosx is not provided by port gdbm.
1030DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
1031DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
1032DEBUG: epoch: in tree: 0 installed: 0
1033DEBUG: bzip2 1.0.5_3 exists in the ports tree
1034DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
1035DEBUG: bzip2 1.0.5_3 +darwin is active
1036DEBUG: Merging existing variants darwin into variants
1037DEBUG: new fully merged portvariants:
1038DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
1039DEBUG: OS Platform: darwin
1040DEBUG: OS Version: 10.2.0
1041DEBUG: Mac OS X Version: 10.6
1042DEBUG: System Arch: i386
1043DEBUG: setting option os.universal_supported to yes
1044DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1045DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1046DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1047DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1048DEBUG: universal variant already exists, so not adding the default one
1049DEBUG: Requested variant i386 is not provided by port bzip2.
1050DEBUG: Requested variant macosx is not provided by port bzip2.
1051DEBUG: Executing variant darwin provides darwin
1052DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
1053DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
1054DEBUG: No need to upgrade! unsermake 0.4-20070824_2 >= unsermake 0.4-20070824_2
1055DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/poll-emulator
1056DEBUG: poll-emulator is *not* installed by MacPorts
1057DEBUG: Searching for dependency: poll-emulator
1058DEBUG: Didn't find receipt, going to depspec regex for: poll-emulator
1059DEBUG: Found Dependency: path: /usr/lib filename: libpoll.dylib regex: ^libpoll\.dylib$
1060DEBUG: poll-emulator not installed, soft dependency satisfied
1061DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
1062DEBUG: epoch: in tree: 0 installed: 0
1063DEBUG: mesa 7.6.1_1 exists in the ports tree
1064DEBUG: mesa 7.6.1_1 +hw_render is the latest installed
1065DEBUG: mesa 7.6.1_1 +hw_render is active
1066DEBUG: Merging existing variants hw_render into variants
1067DEBUG: new fully merged portvariants: hw_render +
1068DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
1069DEBUG: OS Platform: darwin
1070DEBUG: OS Version: 10.2.0
1071DEBUG: Mac OS X Version: 10.6
1072DEBUG: System Arch: i386
1073DEBUG: setting option os.universal_supported to yes
1074DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1075DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1076DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1077DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1078DEBUG: universal variant already exists, so not adding the default one
1079DEBUG: Requested variant darwin is not provided by port mesa.
1080DEBUG: Requested variant i386 is not provided by port mesa.
1081DEBUG: Requested variant macosx is not provided by port mesa.
1082DEBUG: Executing variant hw_render provides hw_render
1083DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
1084DEBUG: epoch: in tree: 0 installed: 0
1085DEBUG: makedepend 1.0.2_0 exists in the ports tree
1086DEBUG: makedepend 1.0.2_0  is the latest installed
1087DEBUG: makedepend 1.0.2_0  is active
1088DEBUG: Merging existing variants  into variants
1089DEBUG: new fully merged portvariants:
1090DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
1091DEBUG: OS Platform: darwin
1092DEBUG: OS Version: 10.2.0
1093DEBUG: Mac OS X Version: 10.6
1094DEBUG: System Arch: i386
1095DEBUG: setting option os.universal_supported to yes
1096DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1097DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1098DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1099DEBUG: adding the default universal variant
1100DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1101DEBUG: Requested variant darwin is not provided by port makedepend.
1102DEBUG: Requested variant i386 is not provided by port makedepend.
1103DEBUG: Requested variant macosx is not provided by port makedepend.
1104DEBUG: No need to upgrade! makedepend 1.0.2_0 >= makedepend 1.0.2_0
1105DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
1106DEBUG: epoch: in tree: 0 installed: 0
1107DEBUG: glut 3.7_3 exists in the ports tree
1108DEBUG: glut 3.7_3  is the latest installed
1109DEBUG: glut 3.7_3  is active
1110DEBUG: Merging existing variants  into variants
1111DEBUG: new fully merged portvariants:
1112DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
1113DEBUG: OS Platform: darwin
1114DEBUG: OS Version: 10.2.0
1115DEBUG: Mac OS X Version: 10.6
1116DEBUG: System Arch: i386
1117DEBUG: setting option os.universal_supported to yes
1118DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1119DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1120DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1121DEBUG: not using configure, so not adding the default universal variant
1122DEBUG: Requested variant darwin is not provided by port glut.
1123DEBUG: Requested variant i386 is not provided by port glut.
1124DEBUG: Requested variant macosx is not provided by port glut.
1125DEBUG: No need to upgrade! glut 3.7_3 >= glut 3.7_3
1126DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto
1127DEBUG: epoch: in tree: 0 installed: 0
1128DEBUG: xorg-glproto 1.4.11_0 exists in the ports tree
1129DEBUG: xorg-glproto 1.4.11_0  is the latest installed
1130DEBUG: xorg-glproto 1.4.11_0  is active
1131DEBUG: Merging existing variants  into variants
1132DEBUG: new fully merged portvariants:
1133DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto
1134DEBUG: OS Platform: darwin
1135DEBUG: OS Version: 10.2.0
1136DEBUG: Mac OS X Version: 10.6
1137DEBUG: System Arch: i386
1138DEBUG: setting option os.universal_supported to yes
1139DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1140DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1141DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1142DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1143DEBUG: Requested variant darwin is not provided by port xorg-glproto.
1144DEBUG: Requested variant i386 is not provided by port xorg-glproto.
1145DEBUG: Requested variant macosx is not provided by port xorg-glproto.
1146DEBUG: No need to upgrade! xorg-glproto 1.4.11_0 >= xorg-glproto 1.4.11_0
1147DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto
1148DEBUG: epoch: in tree: 0 installed: 0
1149DEBUG: xorg-dri2proto 2.3_0 exists in the ports tree
1150DEBUG: xorg-dri2proto 2.3_0  is the latest installed
1151DEBUG: xorg-dri2proto 2.3_0  is active
1152DEBUG: Merging existing variants  into variants
1153DEBUG: new fully merged portvariants:
1154DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto
1155DEBUG: OS Platform: darwin
1156DEBUG: OS Version: 10.2.0
1157DEBUG: Mac OS X Version: 10.6
1158DEBUG: System Arch: i386
1159DEBUG: setting option os.universal_supported to yes
1160DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1161DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1162DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1163DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1164DEBUG: Requested variant darwin is not provided by port xorg-dri2proto.
1165DEBUG: Requested variant i386 is not provided by port xorg-dri2proto.
1166DEBUG: Requested variant macosx is not provided by port xorg-dri2proto.
1167DEBUG: No need to upgrade! xorg-dri2proto 2.3_0 >= xorg-dri2proto 2.3_0
1168DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
1169DEBUG: epoch: in tree: 0 installed: 0
1170DEBUG: xorg-libXfixes 4.0.4_0 exists in the ports tree
1171DEBUG: xorg-libXfixes 4.0.4_0  is the latest installed
1172DEBUG: xorg-libXfixes 4.0.4_0  is active
1173DEBUG: Merging existing variants  into variants
1174DEBUG: new fully merged portvariants:
1175DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
1176DEBUG: OS Platform: darwin
1177DEBUG: OS Version: 10.2.0
1178DEBUG: Mac OS X Version: 10.6
1179DEBUG: System Arch: i386
1180DEBUG: setting option os.universal_supported to yes
1181DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1182DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1183DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1184DEBUG: adding the default universal variant
1185DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1186DEBUG: Requested variant darwin is not provided by port xorg-libXfixes.
1187DEBUG: Requested variant i386 is not provided by port xorg-libXfixes.
1188DEBUG: Requested variant macosx is not provided by port xorg-libXfixes.
1189DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
1190DEBUG: epoch: in tree: 0 installed: 0
1191DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree
1192DEBUG: xorg-fixesproto 4.1.1_0  is the latest installed
1193DEBUG: xorg-fixesproto 4.1.1_0  is active
1194DEBUG: Merging existing variants  into variants
1195DEBUG: new fully merged portvariants:
1196DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
1197DEBUG: OS Platform: darwin
1198DEBUG: OS Version: 10.2.0
1199DEBUG: Mac OS X Version: 10.6
1200DEBUG: System Arch: i386
1201DEBUG: setting option os.universal_supported to yes
1202DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1203DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1204DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1205DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1206DEBUG: Requested variant darwin is not provided by port xorg-fixesproto.
1207DEBUG: Requested variant i386 is not provided by port xorg-fixesproto.
1208DEBUG: Requested variant macosx is not provided by port xorg-fixesproto.
1209DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0
1210DEBUG: No need to upgrade! xorg-libXfixes 4.0.4_0 >= xorg-libXfixes 4.0.4_0
1211DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
1212DEBUG: epoch: in tree: 0 installed: 0
1213DEBUG: xorg-libXi 1.3_0 exists in the ports tree
1214DEBUG: xorg-libXi 1.3_0  is the latest installed
1215DEBUG: xorg-libXi 1.3_0  is active
1216DEBUG: Merging existing variants  into variants
1217DEBUG: new fully merged portvariants:
1218DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
1219DEBUG: OS Platform: darwin
1220DEBUG: OS Version: 10.2.0
1221DEBUG: Mac OS X Version: 10.6
1222DEBUG: System Arch: i386
1223DEBUG: setting option os.universal_supported to yes
1224DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1225DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1226DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1227DEBUG: adding the default universal variant
1228DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1229DEBUG: Requested variant darwin is not provided by port xorg-libXi.
1230DEBUG: Requested variant i386 is not provided by port xorg-libXi.
1231DEBUG: Requested variant macosx is not provided by port xorg-libXi.
1232DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0
1233DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
1234DEBUG: epoch: in tree: 0 installed: 0
1235DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
1236DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
1237DEBUG: xorg-libXmu 1.0.5_0  is active
1238DEBUG: Merging existing variants  into variants
1239DEBUG: new fully merged portvariants:
1240DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
1241DEBUG: OS Platform: darwin
1242DEBUG: OS Version: 10.2.0
1243DEBUG: Mac OS X Version: 10.6
1244DEBUG: System Arch: i386
1245DEBUG: setting option os.universal_supported to yes
1246DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1247DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1248DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1249DEBUG: adding the default universal variant
1250DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1251DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
1252DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
1253DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
1254DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
1255DEBUG: epoch: in tree: 0 installed: 0
1256DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
1257DEBUG: xorg-libXt 1.0.7_1  is the latest installed
1258DEBUG: xorg-libXt 1.0.7_1  is active
1259DEBUG: Merging existing variants  into variants
1260DEBUG: new fully merged portvariants:
1261DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
1262DEBUG: OS Platform: darwin
1263DEBUG: OS Version: 10.2.0
1264DEBUG: Mac OS X Version: 10.6
1265DEBUG: System Arch: i386
1266DEBUG: setting option os.universal_supported to yes
1267DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1268DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1269DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1270DEBUG: adding the default universal variant
1271DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1272DEBUG: Requested variant darwin is not provided by port xorg-libXt.
1273DEBUG: Requested variant i386 is not provided by port xorg-libXt.
1274DEBUG: Requested variant macosx is not provided by port xorg-libXt.
1275DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
1276DEBUG: epoch: in tree: 0 installed: 0
1277DEBUG: autoconf 2.65_1 exists in the ports tree
1278DEBUG: autoconf 2.65_1  is the latest installed
1279DEBUG: autoconf 2.65_1  is active
1280DEBUG: Merging existing variants  into variants
1281DEBUG: new fully merged portvariants:
1282DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
1283DEBUG: OS Platform: darwin
1284DEBUG: OS Version: 10.2.0
1285DEBUG: Mac OS X Version: 10.6
1286DEBUG: System Arch: i386
1287DEBUG: setting option os.universal_supported to yes
1288DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1289DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1290DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1291DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1292DEBUG: Requested variant darwin is not provided by port autoconf.
1293DEBUG: Requested variant i386 is not provided by port autoconf.
1294DEBUG: Requested variant macosx is not provided by port autoconf.
1295DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
1296DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
1297DEBUG: epoch: in tree: 0 installed: 0
1298DEBUG: automake 1.11.1_0 exists in the ports tree
1299DEBUG: automake 1.11.1_0  is the latest installed
1300DEBUG: automake 1.11.1_0  is active
1301DEBUG: Merging existing variants  into variants
1302DEBUG: new fully merged portvariants:
1303DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
1304DEBUG: OS Platform: darwin
1305DEBUG: OS Version: 10.2.0
1306DEBUG: Mac OS X Version: 10.6
1307DEBUG: System Arch: i386
1308DEBUG: setting option os.universal_supported to yes
1309DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1310DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1311DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1312DEBUG: adding the default universal variant
1313DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1314DEBUG: Requested variant darwin is not provided by port automake.
1315DEBUG: Requested variant i386 is not provided by port automake.
1316DEBUG: Requested variant macosx is not provided by port automake.
1317DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
1318DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
1319DEBUG: epoch: in tree: 0 installed: 0
1320DEBUG: libtool 2.2.6b_0 exists in the ports tree
1321DEBUG: libtool 2.2.6b_0  is the latest installed
1322DEBUG: libtool 2.2.6b_0  is active
1323DEBUG: Merging existing variants  into variants
1324DEBUG: new fully merged portvariants:
1325DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
1326DEBUG: OS Platform: darwin
1327DEBUG: OS Version: 10.2.0
1328DEBUG: Mac OS X Version: 10.6
1329DEBUG: System Arch: i386
1330DEBUG: setting option os.universal_supported to yes
1331DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1332DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1333DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1334DEBUG: adding the default universal variant
1335DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1336DEBUG: Requested variant darwin is not provided by port libtool.
1337DEBUG: Requested variant i386 is not provided by port libtool.
1338DEBUG: Requested variant macosx is not provided by port libtool.
1339DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
1340DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
1341DEBUG: epoch: in tree: 0 installed: 0
1342DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
1343DEBUG: xorg-libsm 1.1.1_0  is the latest installed
1344DEBUG: xorg-libsm 1.1.1_0  is active
1345DEBUG: Merging existing variants  into variants
1346DEBUG: new fully merged portvariants:
1347DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
1348DEBUG: OS Platform: darwin
1349DEBUG: OS Version: 10.2.0
1350DEBUG: Mac OS X Version: 10.6
1351DEBUG: System Arch: i386
1352DEBUG: setting option os.universal_supported to yes
1353DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1354DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1355DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1356DEBUG: adding the default universal variant
1357DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1358DEBUG: Requested variant darwin is not provided by port xorg-libsm.
1359DEBUG: Requested variant i386 is not provided by port xorg-libsm.
1360DEBUG: Requested variant macosx is not provided by port xorg-libsm.
1361DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
1362DEBUG: epoch: in tree: 0 installed: 0
1363DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
1364DEBUG: xorg-libice 1.0.6_0  is the latest installed
1365DEBUG: xorg-libice 1.0.6_0  is active
1366DEBUG: Merging existing variants  into variants
1367DEBUG: new fully merged portvariants:
1368DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
1369DEBUG: OS Platform: darwin
1370DEBUG: OS Version: 10.2.0
1371DEBUG: Mac OS X Version: 10.6
1372DEBUG: System Arch: i386
1373DEBUG: setting option os.universal_supported to yes
1374DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1375DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1376DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1377DEBUG: adding the default universal variant
1378DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1379DEBUG: Requested variant darwin is not provided by port xorg-libice.
1380DEBUG: Requested variant i386 is not provided by port xorg-libice.
1381DEBUG: Requested variant macosx is not provided by port xorg-libice.
1382DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
1383DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
1384DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
1385DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
1386DEBUG: No need to upgrade! mesa 7.6.1_1 >= mesa 7.6.1_1
1387DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
1388DEBUG: epoch: in tree: 0 installed: 0
1389DEBUG: aspell 0.60.6_2 exists in the ports tree
1390DEBUG: aspell 0.60.6_2 +macosx is the latest installed
1391DEBUG: aspell 0.60.6_2 +macosx is active
1392DEBUG: Merging existing variants macosx into variants
1393DEBUG: new fully merged portvariants:
1394DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
1395DEBUG: OS Platform: darwin
1396DEBUG: OS Version: 10.2.0
1397DEBUG: Mac OS X Version: 10.6
1398DEBUG: System Arch: i386
1399DEBUG: setting option os.universal_supported to yes
1400DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1401DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1402DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1403DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1404DEBUG: adding the default universal variant
1405DEBUG: Requested variant darwin is not provided by port aspell.
1406DEBUG: Requested variant i386 is not provided by port aspell.
1407DEBUG: Executing variant macosx provides macosx
1408DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
1409DEBUG: epoch: in tree: 0 installed: 0
1410DEBUG: texinfo 4.13_0 exists in the ports tree
1411DEBUG: texinfo 4.13_0  is the latest installed
1412DEBUG: texinfo 4.13_0  is active
1413DEBUG: Merging existing variants  into variants
1414DEBUG: new fully merged portvariants:
1415DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
1416DEBUG: OS Platform: darwin
1417DEBUG: OS Version: 10.2.0
1418DEBUG: Mac OS X Version: 10.6
1419DEBUG: System Arch: i386
1420DEBUG: setting option os.universal_supported to yes
1421DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1422DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1423DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1424DEBUG: adding the default universal variant
1425DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1426DEBUG: Requested variant darwin is not provided by port texinfo.
1427DEBUG: Requested variant i386 is not provided by port texinfo.
1428DEBUG: Requested variant macosx is not provided by port texinfo.
1429DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
1430DEBUG: epoch: in tree: 0 installed: 0
1431DEBUG: lzmautils 4.32.7_1 exists in the ports tree
1432DEBUG: lzmautils 4.32.7_1  is the latest installed
1433DEBUG: lzmautils 4.32.7_1  is active
1434DEBUG: Merging existing variants  into variants
1435DEBUG: new fully merged portvariants:
1436DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
1437DEBUG: OS Platform: darwin
1438DEBUG: OS Version: 10.2.0
1439DEBUG: Mac OS X Version: 10.6
1440DEBUG: System Arch: i386
1441DEBUG: setting option os.universal_supported to yes
1442DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1443DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1444DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1445DEBUG: adding the default universal variant
1446DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1447DEBUG: Requested variant darwin is not provided by port lzmautils.
1448DEBUG: Requested variant i386 is not provided by port lzmautils.
1449DEBUG: Requested variant macosx is not provided by port lzmautils.
1450DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
1451DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
1452DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2
1453DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
1454DEBUG: epoch: in tree: 0 installed: 0
1455DEBUG: flex 2.5.35_0 exists in the ports tree
1456DEBUG: flex 2.5.35_0  is the latest installed
1457DEBUG: flex 2.5.35_0  is active
1458DEBUG: Merging existing variants  into variants
1459DEBUG: new fully merged portvariants:
1460DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
1461DEBUG: OS Platform: darwin
1462DEBUG: OS Version: 10.2.0
1463DEBUG: Mac OS X Version: 10.6
1464DEBUG: System Arch: i386
1465DEBUG: setting option os.universal_supported to yes
1466DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1467DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1468DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1469DEBUG: adding the default universal variant
1470DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1471DEBUG: Requested variant darwin is not provided by port flex.
1472DEBUG: Requested variant i386 is not provided by port flex.
1473DEBUG: Requested variant macosx is not provided by port flex.
1474DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
1475DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
1476DEBUG: epoch: in tree: 0 installed: 0
1477DEBUG: glib2 2.22.4_0 exists in the ports tree
1478DEBUG: glib2 2.22.4_0 +darwin is the latest installed
1479DEBUG: glib2 2.22.4_0 +darwin is active
1480DEBUG: Merging existing variants darwin into variants
1481DEBUG: new fully merged portvariants:
1482DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
1483DEBUG: OS Platform: darwin
1484DEBUG: OS Version: 10.2.0
1485DEBUG: Mac OS X Version: 10.6
1486DEBUG: System Arch: i386
1487DEBUG: setting option os.universal_supported to yes
1488DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1489DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1490DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1491DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1492DEBUG: adding the default universal variant
1493DEBUG: Requested variant i386 is not provided by port glib2.
1494DEBUG: Requested variant macosx is not provided by port glib2.
1495DEBUG: Executing variant darwin provides darwin
1496DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
1497DEBUG: python_select is *not* installed by MacPorts
1498DEBUG: Searching for dependency: python_select
1499DEBUG: Didn't find receipt, going to depspec regex for: python_select
1500DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
1501DEBUG: python_select not installed, soft dependency satisfied
1502DEBUG: No need to upgrade! glib2 2.22.4_0 >= glib2 2.22.4_0
1503DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
1504DEBUG: epoch: in tree: 0 installed: 0
1505DEBUG: hicolor-icon-theme 0.12_0 exists in the ports tree
1506DEBUG: hicolor-icon-theme 0.12_0  is the latest installed
1507DEBUG: hicolor-icon-theme 0.12_0  is active
1508DEBUG: Merging existing variants  into variants
1509DEBUG: new fully merged portvariants:
1510DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
1511DEBUG: OS Platform: darwin
1512DEBUG: OS Version: 10.2.0
1513DEBUG: Mac OS X Version: 10.6
1514DEBUG: System Arch: i386
1515DEBUG: setting option os.universal_supported to yes
1516DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1517DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1518DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1519DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1520DEBUG: Requested variant darwin is not provided by port hicolor-icon-theme.
1521DEBUG: Requested variant i386 is not provided by port hicolor-icon-theme.
1522DEBUG: Requested variant macosx is not provided by port hicolor-icon-theme.
1523DEBUG: No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0
1524DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
1525DEBUG: epoch: in tree: 0 installed: 0
1526DEBUG: jasper 1.900.1_6 exists in the ports tree
1527DEBUG: jasper 1.900.1_6  is the latest installed
1528DEBUG: jasper 1.900.1_6  is active
1529DEBUG: Merging existing variants  into variants
1530DEBUG: new fully merged portvariants:
1531DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
1532DEBUG: OS Platform: darwin
1533DEBUG: OS Version: 10.2.0
1534DEBUG: Mac OS X Version: 10.6
1535DEBUG: System Arch: i386
1536DEBUG: setting option os.universal_supported to yes
1537DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1538DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1539DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1540DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1541DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1542DEBUG: universal variant already exists, so not adding the default one
1543DEBUG: Requested variant darwin is not provided by port jasper.
1544DEBUG: Requested variant i386 is not provided by port jasper.
1545DEBUG: Requested variant macosx is not provided by port jasper.
1546DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
1547DEBUG: unzip is *not* installed by MacPorts
1548DEBUG: Searching for dependency: unzip
1549DEBUG: Didn't find receipt, going to depspec regex for: unzip
1550DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
1551DEBUG: unzip not installed, soft dependency satisfied
1552DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
1553DEBUG: epoch: in tree: 0 installed: 0
1554DEBUG: jpeg 7_0 exists in the ports tree
1555DEBUG: jpeg 7_0  is the latest installed
1556DEBUG: jpeg 7_0  is active
1557DEBUG: Merging existing variants  into variants
1558DEBUG: new fully merged portvariants:
1559DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
1560DEBUG: OS Platform: darwin
1561DEBUG: OS Version: 10.2.0
1562DEBUG: Mac OS X Version: 10.6
1563DEBUG: System Arch: i386
1564DEBUG: setting option os.universal_supported to yes
1565DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1566DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1567DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1568DEBUG: adding the default universal variant
1569DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1570DEBUG: Requested variant darwin is not provided by port jpeg.
1571DEBUG: Requested variant i386 is not provided by port jpeg.
1572DEBUG: Requested variant macosx is not provided by port jpeg.
1573DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
1574DEBUG: No need to upgrade! jasper 1.900.1_6 >= jasper 1.900.1_6
1575DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
1576DEBUG: epoch: in tree: 0 installed: 0
1577DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
1578DEBUG: libart_lgpl 2.3.20_0  is the latest installed
1579DEBUG: libart_lgpl 2.3.20_0  is active
1580DEBUG: Merging existing variants  into variants
1581DEBUG: new fully merged portvariants:
1582DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
1583DEBUG: OS Platform: darwin
1584DEBUG: OS Version: 10.2.0
1585DEBUG: Mac OS X Version: 10.6
1586DEBUG: System Arch: i386
1587DEBUG: setting option os.universal_supported to yes
1588DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1589DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1590DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1591DEBUG: adding the default universal variant
1592DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1593DEBUG: Requested variant darwin is not provided by port libart_lgpl.
1594DEBUG: Requested variant i386 is not provided by port libart_lgpl.
1595DEBUG: Requested variant macosx is not provided by port libart_lgpl.
1596DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
1597DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
1598DEBUG: epoch: in tree: 0 installed: 0
1599DEBUG: libidn 1.16_0 exists in the ports tree
1600DEBUG: libidn 1.16_0  is the latest installed
1601DEBUG: libidn 1.16_0  is active
1602DEBUG: Merging existing variants  into variants
1603DEBUG: new fully merged portvariants:
1604DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
1605DEBUG: OS Platform: darwin
1606DEBUG: OS Version: 10.2.0
1607DEBUG: Mac OS X Version: 10.6
1608DEBUG: System Arch: i386
1609DEBUG: setting option os.universal_supported to yes
1610DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1611DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1612DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1613DEBUG: adding the default universal variant
1614DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1615DEBUG: Requested variant darwin is not provided by port libidn.
1616DEBUG: Requested variant i386 is not provided by port libidn.
1617DEBUG: Requested variant macosx is not provided by port libidn.
1618DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0
1619DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
1620DEBUG: epoch: in tree: 0 installed: 0
1621DEBUG: libpng 1.2.42_0 exists in the ports tree
1622DEBUG: libpng 1.2.42_0  is the latest installed
1623DEBUG: libpng 1.2.42_0  is active
1624DEBUG: Merging existing variants  into variants
1625DEBUG: new fully merged portvariants:
1626DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
1627DEBUG: OS Platform: darwin
1628DEBUG: OS Version: 10.2.0
1629DEBUG: Mac OS X Version: 10.6
1630DEBUG: System Arch: i386
1631DEBUG: setting option os.universal_supported to yes
1632DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1633DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1634DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1635DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1636DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1637DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
1638DEBUG: universal variant already exists, so not adding the default one
1639DEBUG: Requested variant darwin is not provided by port libpng.
1640DEBUG: Requested variant i386 is not provided by port libpng.
1641DEBUG: Requested variant macosx is not provided by port libpng.
1642DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
1643DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
1644DEBUG: epoch: in tree: 0 installed: 0
1645DEBUG: libxml2 2.7.6_0 exists in the ports tree
1646DEBUG: libxml2 2.7.6_0  is the latest installed
1647DEBUG: libxml2 2.7.6_0  is active
1648DEBUG: Merging existing variants  into variants
1649DEBUG: new fully merged portvariants:
1650DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
1651DEBUG: OS Platform: darwin
1652DEBUG: OS Version: 10.2.0
1653DEBUG: Mac OS X Version: 10.6
1654DEBUG: System Arch: i386
1655DEBUG: setting option os.universal_supported to yes
1656DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1657DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1658DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1659DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
1660DEBUG: adding the default universal variant
1661DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1662DEBUG: Requested variant darwin is not provided by port libxml2.
1663DEBUG: Requested variant i386 is not provided by port libxml2.
1664DEBUG: Requested variant macosx is not provided by port libxml2.
1665DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
1666DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
1667DEBUG: epoch: in tree: 0 installed: 0
1668DEBUG: libxslt 1.1.26_0 exists in the ports tree
1669DEBUG: libxslt 1.1.26_0  is the latest installed
1670DEBUG: libxslt 1.1.26_0  is active
1671DEBUG: Merging existing variants  into variants
1672DEBUG: new fully merged portvariants:
1673DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
1674DEBUG: OS Platform: darwin
1675DEBUG: OS Version: 10.2.0
1676DEBUG: Mac OS X Version: 10.6
1677DEBUG: System Arch: i386
1678DEBUG: setting option os.universal_supported to yes
1679DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1680DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1681DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1682DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1683DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1684DEBUG: universal variant already exists, so not adding the default one
1685DEBUG: Requested variant darwin is not provided by port libxslt.
1686DEBUG: Requested variant i386 is not provided by port libxslt.
1687DEBUG: Requested variant macosx is not provided by port libxslt.
1688DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
1689DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
1690DEBUG: epoch: in tree: 0 installed: 0
1691DEBUG: pcre 7.9_0 exists in the ports tree
1692DEBUG: pcre 7.9_0  is the latest installed
1693DEBUG: pcre 7.9_0  is active
1694DEBUG: Merging existing variants  into variants
1695DEBUG: new fully merged portvariants:
1696DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
1697DEBUG: OS Platform: darwin
1698DEBUG: OS Version: 10.2.0
1699DEBUG: Mac OS X Version: 10.6
1700DEBUG: System Arch: i386
1701DEBUG: setting option os.universal_supported to yes
1702DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1703DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1704DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1705DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1706DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1707DEBUG: universal variant already exists, so not adding the default one
1708DEBUG: Requested variant darwin is not provided by port pcre.
1709DEBUG: Requested variant i386 is not provided by port pcre.
1710DEBUG: Requested variant macosx is not provided by port pcre.
1711DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
1712DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
1713DEBUG: epoch: in tree: 0 installed: 0
1714DEBUG: tiff 3.9.2_2 exists in the ports tree
1715DEBUG: tiff 3.9.2_2 +macosx is the latest installed
1716DEBUG: tiff 3.9.2_2 +macosx is active
1717DEBUG: Merging existing variants macosx into variants
1718DEBUG: new fully merged portvariants:
1719DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
1720DEBUG: OS Platform: darwin
1721DEBUG: OS Version: 10.2.0
1722DEBUG: Mac OS X Version: 10.6
1723DEBUG: System Arch: i386
1724DEBUG: setting option os.universal_supported to yes
1725DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1726DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1727DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1728DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1729DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1730DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
1731DEBUG: universal variant already exists, so not adding the default one
1732DEBUG: Requested variant darwin is not provided by port tiff.
1733DEBUG: Requested variant i386 is not provided by port tiff.
1734DEBUG: Executing variant macosx provides macosx
1735DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
1736DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
1737DEBUG: epoch: in tree: 0 installed: 0
1738DEBUG: openexr 1.6.1_1 exists in the ports tree
1739DEBUG: openexr 1.6.1_1  is the latest installed
1740DEBUG: openexr 1.6.1_1  is active
1741DEBUG: Merging existing variants  into variants
1742DEBUG: new fully merged portvariants:
1743DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
1744DEBUG: OS Platform: darwin
1745DEBUG: OS Version: 10.2.0
1746DEBUG: Mac OS X Version: 10.6
1747DEBUG: System Arch: i386
1748DEBUG: setting option os.universal_supported to yes
1749DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1750DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1751DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1752DEBUG: adding the default universal variant
1753DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1754DEBUG: Requested variant darwin is not provided by port openexr.
1755DEBUG: Requested variant i386 is not provided by port openexr.
1756DEBUG: Requested variant macosx is not provided by port openexr.
1757DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
1758DEBUG: epoch: in tree: 0 installed: 0
1759DEBUG: ilmbase 1.0.1_2 exists in the ports tree
1760DEBUG: ilmbase 1.0.1_2  is the latest installed
1761DEBUG: ilmbase 1.0.1_2  is active
1762DEBUG: Merging existing variants  into variants
1763DEBUG: new fully merged portvariants:
1764DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
1765DEBUG: OS Platform: darwin
1766DEBUG: OS Version: 10.2.0
1767DEBUG: Mac OS X Version: 10.6
1768DEBUG: System Arch: i386
1769DEBUG: setting option os.universal_supported to yes
1770DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1771DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1772DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1773DEBUG: adding the default universal variant
1774DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1775DEBUG: Requested variant darwin is not provided by port ilmbase.
1776DEBUG: Requested variant i386 is not provided by port ilmbase.
1777DEBUG: Requested variant macosx is not provided by port ilmbase.
1778DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
1779DEBUG: epoch: in tree: 0 installed: 0
1780DEBUG: gsed 4.2.1_0 exists in the ports tree
1781DEBUG: gsed 4.2.1_0  is the latest installed
1782DEBUG: gsed 4.2.1_0  is active
1783DEBUG: Merging existing variants  into variants
1784DEBUG: new fully merged portvariants:
1785DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
1786DEBUG: OS Platform: darwin
1787DEBUG: OS Version: 10.2.0
1788DEBUG: Mac OS X Version: 10.6
1789DEBUG: System Arch: i386
1790DEBUG: setting option os.universal_supported to yes
1791DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1792DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1793DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1794DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1795DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1796DEBUG: universal variant already exists, so not adding the default one
1797DEBUG: Requested variant darwin is not provided by port gsed.
1798DEBUG: Requested variant i386 is not provided by port gsed.
1799DEBUG: Requested variant macosx is not provided by port gsed.
1800DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
1801DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
1802DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
1803DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
1804DEBUG: epoch: in tree: 0 installed: 0
1805DEBUG: qt3 3.3.8_8 exists in the ports tree
1806DEBUG: qt3 3.3.8_8 +darwin_10 is the latest installed
1807DEBUG: qt3 3.3.8_8 +darwin_10 is active
1808DEBUG: Merging existing variants darwin_10 into variants
1809DEBUG: new fully merged portvariants:
1810DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
1811DEBUG: OS Platform: darwin
1812DEBUG: OS Version: 10.2.0
1813DEBUG: Mac OS X Version: 10.6
1814DEBUG: System Arch: i386
1815DEBUG: setting option os.universal_supported to yes
1816DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1817DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1818DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1819DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1820DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1821DEBUG: Requested variant darwin is not provided by port qt3.
1822DEBUG: Requested variant i386 is not provided by port qt3.
1823DEBUG: Requested variant macosx is not provided by port qt3.
1824DEBUG: Executing variant darwin_10 provides darwin_10
1825DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
1826DEBUG: epoch: in tree: 0 installed: 0
1827DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree
1828DEBUG: xorg-libXcursor 1.1.10_0  is the latest installed
1829DEBUG: xorg-libXcursor 1.1.10_0  is active
1830DEBUG: Merging existing variants  into variants
1831DEBUG: new fully merged portvariants:
1832DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
1833DEBUG: OS Platform: darwin
1834DEBUG: OS Version: 10.2.0
1835DEBUG: Mac OS X Version: 10.6
1836DEBUG: System Arch: i386
1837DEBUG: setting option os.universal_supported to yes
1838DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1839DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1840DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1841DEBUG: adding the default universal variant
1842DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1843DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
1844DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
1845DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
1846DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0
1847DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
1848DEBUG: epoch: in tree: 0 installed: 0
1849DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree
1850DEBUG: xorg-libXinerama 1.1_0  is the latest installed
1851DEBUG: xorg-libXinerama 1.1_0  is active
1852DEBUG: Merging existing variants  into variants
1853DEBUG: new fully merged portvariants:
1854DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
1855DEBUG: OS Platform: darwin
1856DEBUG: OS Version: 10.2.0
1857DEBUG: Mac OS X Version: 10.6
1858DEBUG: System Arch: i386
1859DEBUG: setting option os.universal_supported to yes
1860DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1861DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1862DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1863DEBUG: adding the default universal variant
1864DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1865DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
1866DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
1867DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
1868DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
1869DEBUG: epoch: in tree: 0 installed: 0
1870DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree
1871DEBUG: xorg-xineramaproto 1.2_0  is the latest installed
1872DEBUG: xorg-xineramaproto 1.2_0  is active
1873DEBUG: Merging existing variants  into variants
1874DEBUG: new fully merged portvariants:
1875DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
1876DEBUG: OS Platform: darwin
1877DEBUG: OS Version: 10.2.0
1878DEBUG: Mac OS X Version: 10.6
1879DEBUG: System Arch: i386
1880DEBUG: setting option os.universal_supported to yes
1881DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1882DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1883DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1884DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1885DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto.
1886DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto.
1887DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto.
1888DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0
1889DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0
1890DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
1891DEBUG: epoch: in tree: 0 installed: 0
1892DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
1893DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
1894DEBUG: xorg-libXrandr 1.3.0_1  is active
1895DEBUG: Merging existing variants  into variants
1896DEBUG: new fully merged portvariants:
1897DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
1898DEBUG: OS Platform: darwin
1899DEBUG: OS Version: 10.2.0
1900DEBUG: Mac OS X Version: 10.6
1901DEBUG: System Arch: i386
1902DEBUG: setting option os.universal_supported to yes
1903DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1904DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1905DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1906DEBUG: adding the default universal variant
1907DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1908DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
1909DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
1910DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
1911DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
1912DEBUG: epoch: in tree: 0 installed: 0
1913DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
1914DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
1915DEBUG: xorg-randrproto 1.3.1_0  is active
1916DEBUG: Merging existing variants  into variants
1917DEBUG: new fully merged portvariants:
1918DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
1919DEBUG: OS Platform: darwin
1920DEBUG: OS Version: 10.2.0
1921DEBUG: Mac OS X Version: 10.6
1922DEBUG: System Arch: i386
1923DEBUG: setting option os.universal_supported to yes
1924DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1925DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1926DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1927DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1928DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
1929DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
1930DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
1931DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0
1932DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1
1933DEBUG: No need to upgrade! qt3 3.3.8_8 >= qt3 3.3.8_8
1934DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/dejavu-fonts
1935DEBUG: epoch: in tree: 0 installed: 0
1936DEBUG: dejavu-fonts 2.29_0 exists in the ports tree
1937DEBUG: dejavu-fonts 2.29_0  is the latest installed
1938DEBUG: dejavu-fonts 2.29_0  is active
1939DEBUG: Merging existing variants  into variants
1940DEBUG: new fully merged portvariants:
1941DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/dejavu-fonts
1942DEBUG: OS Platform: darwin
1943DEBUG: OS Version: 10.2.0
1944DEBUG: Mac OS X Version: 10.6
1945DEBUG: System Arch: i386
1946DEBUG: setting option os.universal_supported to yes
1947DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1948DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1949DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1950DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1951DEBUG: Requested variant darwin is not provided by port dejavu-fonts.
1952DEBUG: Requested variant i386 is not provided by port dejavu-fonts.
1953DEBUG: Requested variant macosx is not provided by port dejavu-fonts.
1954DEBUG: No need to upgrade! dejavu-fonts 2.29_0 >= dejavu-fonts 2.29_0
1955DEBUG: No need to upgrade! kdelibs3 3.5.10_3 >= kdelibs3 3.5.10_3
1956DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb-compat
1957DEBUG: epoch: in tree: 0 installed: 0
1958DEBUG: libusb-compat 0.1.3_0 exists in the ports tree
1959DEBUG: libusb-compat 0.1.3_0 +universal is the latest installed
1960DEBUG: libusb-compat 0.1.3_0 +universal is active
1961DEBUG: Merging existing variants universal into variants
1962DEBUG: new fully merged portvariants: universal +
1963DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb-compat
1964DEBUG: OS Platform: darwin
1965DEBUG: OS Version: 10.2.0
1966DEBUG: Mac OS X Version: 10.6
1967DEBUG: System Arch: i386
1968DEBUG: setting option os.universal_supported to yes
1969DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1970DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1971DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1972DEBUG: adding the default universal variant
1973DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1974DEBUG: Requested variant darwin is not provided by port libusb-compat.
1975DEBUG: Requested variant i386 is not provided by port libusb-compat.
1976DEBUG: Requested variant macosx is not provided by port libusb-compat.
1977DEBUG: Executing variant universal provides universal
1978DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
1979DEBUG: epoch: in tree: 0 installed: 0
1980DEBUG: libusb 1.0.6_0 exists in the ports tree
1981DEBUG: libusb 1.0.6_0 +universal is the latest installed
1982DEBUG: libusb 1.0.6_0 +universal is active
1983DEBUG: Merging existing variants universal into variants
1984DEBUG: new fully merged portvariants: universal +
1985DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
1986DEBUG: OS Platform: darwin
1987DEBUG: OS Version: 10.2.0
1988DEBUG: Mac OS X Version: 10.6
1989DEBUG: System Arch: i386
1990DEBUG: setting option os.universal_supported to yes
1991DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1992DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1993DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1994DEBUG: adding the default universal variant
1995DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1996DEBUG: Requested variant darwin is not provided by port libusb.
1997DEBUG: Requested variant i386 is not provided by port libusb.
1998DEBUG: Requested variant macosx is not provided by port libusb.
1999DEBUG: Executing variant universal provides universal
2000DEBUG: No need to upgrade! libusb 1.0.6_0 >= libusb 1.0.6_0
2001DEBUG: No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0
2002--->  Computing dependencies for piklab
2003DEBUG: Searching for dependency: kdelibs3
2004DEBUG: Found Dependency: receipt exists for kdelibs3
2005DEBUG: Searching for dependency: libusb-compat
2006DEBUG: Found Dependency: receipt exists for libusb-compat
2007DEBUG: Searching for dependency: jpeg
2008DEBUG: Found Dependency: receipt exists for jpeg
2009DEBUG: Searching for dependency: readline
2010DEBUG: Found Dependency: receipt exists for readline
2011DEBUG: Executing org.macports.main (piklab)
2012DEBUG: Skipping completed org.macports.fetch (piklab)
2013DEBUG: Skipping completed org.macports.checksum (piklab)
2014DEBUG: setting option extract.cmd to /usr/bin/bzip2
2015DEBUG: Skipping completed org.macports.extract (piklab)
2016DEBUG: Skipping completed org.macports.patch (piklab)
2017--->  Configuring piklab
2018DEBUG: Using compiler 'Mac OS X gcc 4.2'
2019DEBUG: Executing org.macports.configure (piklab)
2020DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2'
2021DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_piklab/work/piklab-0.15.4" && ./configure --prefix=/opt/local QTDIR=/opt/local/lib/qt3 --without-arts'
2022checking build system type... i686-apple-darwin10.2.0
2023checking host system type... i686-apple-darwin10.2.0
2024checking target system type... i686-apple-darwin10.2.0
2025checking for a BSD-compatible install... /usr/bin/install -c
2026checking whether build environment is sane... yes
2027checking for a thread-safe mkdir -p... admin/install-sh -c -d
2028checking for gawk... no
2029checking for mawk... no
2030checking for nawk... no
2031checking for awk... awk
2032checking whether make sets $(MAKE)... yes
2033checking for kde-config... /opt/local/bin/kde-config
2034checking where to install... /opt/local (as requested)
2035checking for style of include used by make... GNU
2036checking for gcc... /usr/bin/gcc-4.2
2037checking for C compiler default output file name... a.out
2038checking whether the C compiler works... yes
2039checking whether we are cross compiling... no
2040checking for suffix of executables...
2041checking for suffix of object files... o
2042checking whether we are using the GNU C compiler... yes
2043checking whether /usr/bin/gcc-4.2 accepts -g... yes
2044checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
2045checking dependency style of /usr/bin/gcc-4.2... gcc3
2046checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
2047checking whether we are using the GNU C++ compiler... yes
2048checking whether /usr/bin/g++-4.2 accepts -g... yes
2049checking dependency style of /usr/bin/g++-4.2... gcc3
2050checking whether /usr/bin/gcc-4.2 is blacklisted... no
2051checking whether /usr/bin/g++-4.2 supports -Wundef... yes
2052checking whether /usr/bin/g++-4.2 supports -Wno-long-long... yes
2053checking whether /usr/bin/g++-4.2 supports -Wno-non-virtual-dtor... yes
2054checking whether /usr/bin/g++-4.2 supports -fno-reorder-blocks... yes
2055checking whether /usr/bin/g++-4.2 supports -fno-exceptions... yes
2056checking whether /usr/bin/g++-4.2 supports -fno-check-new... yes
2057checking whether /usr/bin/g++-4.2 supports -fno-common... yes
2058checking whether /usr/bin/g++-4.2 supports -fexceptions... yes
2059checking whether system headers can cope with -O2 -fno-inline... irrelevant
2060checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E
2061checking whether /usr/bin/g++-4.2 supports -O0... yes
2062not using lib directory suffix
2063checking for a sed that does not truncate output... /opt/local/bin/gsed
2064checking for grep that handles long lines and -e... /usr/bin/grep
2065checking for egrep... /usr/bin/grep -E
2066checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
2067checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
2068checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r
2069checking for BSD-compatible nm... /usr/bin/nm
2070checking whether ln -s works... yes
2071checking how to recognise dependent libraries... pass_all
2072checking for ANSI C header files... yes
2073checking for sys/types.h... yes
2074checking for sys/stat.h... yes
2075checking for stdlib.h... yes
2076checking for string.h... yes
2077checking for memory.h... yes
2078checking for strings.h... yes
2079checking for inttypes.h... yes
2080checking for stdint.h... yes
2081checking for unistd.h... yes
2082checking dlfcn.h usability... yes
2083checking dlfcn.h presence... yes
2084checking for dlfcn.h... yes
2085checking for g77... no
2086checking for xlf... no
2087checking for f77... no
2088checking for frt... no
2089checking for pgf77... no
2090checking for cf77... no
2091checking for fort77... no
2092checking for fl32... no
2093checking for af77... no
2094checking for xlf90... no
2095checking for f90... no
2096checking for pgf90... no
2097checking for pghpf... no
2098checking for epcf90... no
2099checking for gfortran... no
2100checking for g95... no
2101checking for xlf95... no
2102checking for f95... no
2103checking for fort... no
2104checking for ifort... no
2105checking for ifc... no
2106checking for efc... no
2107checking for pgf95... no
2108checking for lf95... no
2109checking for ftn... no
2110checking whether we are using the GNU Fortran 77 compiler... no
2111checking whether  accepts -g... no
2112checking the maximum length of command line arguments... 65536
2113checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok
2114checking for objdir... .libs
2115checking for ar... ar
2116checking for ranlib... ranlib
2117checking for strip... strip
2118checking if /usr/bin/gcc-4.2 static flag  works... yes
2119checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no
2120checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common
2121checking if /usr/bin/gcc-4.2 PIC flag -fno-common works... yes
2122checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
2123checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
2124checking dynamic linker characteristics... darwin10.2.0 dyld
2125checking how to hardcode library paths into programs... immediate
2126checking whether stripping libraries is possible... yes
2127checking for dlopen in -ldl... yes
2128checking whether a program can dlopen itself... yes
2129checking whether a statically linked program can dlopen itself... yes
2130checking if libtool supports shared libraries... yes
2131checking whether to build shared libraries... yes
2132checking whether to build static libraries... no
2133configure: creating libtool
2134appending configuration tag "CXX" to libtool
2135checking for ld used by /usr/bin/g++-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
2136checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
2137checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
2138checking for /usr/bin/g++-4.2 option to produce PIC... -fno-common
2139checking if /usr/bin/g++-4.2 PIC flag -fno-common works... yes
2140checking if /usr/bin/g++-4.2 supports -c -o file.o... yes
2141checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
2142checking dynamic linker characteristics... darwin10.2.0 dyld
2143checking how to hardcode library paths into programs... immediate
2144checking whether stripping libraries is possible... yes
2145checking for dlopen in -ldl... (cached) yes
2146checking whether a program can dlopen itself... (cached) yes
2147checking whether a statically linked program can dlopen itself... (cached) yes
2148appending configuration tag "F77" to libtool
2149checking for msgfmt... /opt/local/bin/msgfmt
2150checking for gmsgfmt... /opt/local/bin/msgfmt
2151checking for xgettext... /opt/local/bin/xgettext
2152checking if C++ programs can be compiled... yes
2153checking for strlcat... yes
2154checking if strlcat needs custom prototype... no
2155checking for strlcpy... yes
2156checking if strlcpy needs custom prototype... no
2157checking for main in -lutil... yes
2158checking for main in -lcompat... no
2159checking for crypt in -lcrypt... no
2160checking for crypt in -lc... yes
2161checking for socklen_t... yes
2162checking for dnet_ntoa in -ldnet... no
2163checking for dnet_ntoa in -ldnet_stub... no
2164checking for inet_ntoa... yes
2165checking for connect... yes
2166checking for remove... yes
2167checking for shmat... yes
2168checking for sys/types.h... (cached) yes
2169checking for stdint.h... (cached) yes
2170checking sys/bitypes.h usability... no
2171checking sys/bitypes.h presence... no
2172checking for sys/bitypes.h... no
2173checking for poll in -lpoll... yes
2174checking Carbon/Carbon.h usability... yes
2175checking Carbon/Carbon.h presence... yes
2176checking for Carbon/Carbon.h... yes
2177checking CoreAudio/CoreAudio.h usability... yes
2178checking CoreAudio/CoreAudio.h presence... yes
2179checking for CoreAudio/CoreAudio.h... yes
2180checking if res_init needs -lresolv... yes
2181checking for res_init... yes
2182checking if res_init needs custom prototype... no
2183checking for killpg in -lucb... no
2184checking for int... yes
2185checking size of int... 4
2186checking for short... yes
2187checking size of short... 2
2188checking for long... yes
2189checking size of long... 8
2190checking for char *... yes
2191checking size of char *... 8
2192checking for dlopen in -ldl... (cached) yes
2193checking for shl_unload in -ldld... no
2194checking for size_t... yes
2195checking size of size_t... 8
2196checking for unsigned long... yes
2197checking size of unsigned long... 8
2198checking sizeof size_t == sizeof unsigned long... yes
2199checking for PIE support... yes
2200checking if enabling -pie/fPIE support... yes
2201checking crt_externs.h usability... yes
2202checking crt_externs.h presence... yes
2203checking for crt_externs.h... yes
2204checking for _NSGetEnviron... yes
2205checking for vsnprintf... yes
2206checking for snprintf... yes
2207checking for X... libraries /usr/lib, headers .
2208checking for IceConnectionNumber in -lICE... yes
2209checking for libXext... yes
2210checking for pthread_create in -lpthread... yes
2211checking for extra includes... no
2212checking for extra libs... no
2213checking for libz... -lz
2214checking for libpng... -lpng -lz -lm
2215checking for libjpeg6b... no
2216checking for libjpeg... -ljpeg
2217configure: WARNING:
2218There is an installation error in jpeg support. You seem to have only one
2219of either the headers _or_ the libraries installed. You may need to either
2220provide correct --with-extra-... options, or the development package of
2221libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
2222Disabling JPEG support.
2223
2224checking for perl... /opt/local/bin/perl
2225checking for Qt... libraries /opt/local/lib/qt3/lib, headers /opt/local/lib/qt3/include using -mt
2226checking for moc... /opt/local/lib/qt3/bin/moc
2227checking for uic... /opt/local/lib/qt3/bin/uic
2228checking whether uic supports -L ... yes
2229checking whether uic supports -nounload ... yes
2230yes
2231checking for rpath... yes
2232checking for KDE... libraries /opt/local/lib, headers /opt/local/include
2233checking if UIC has KDE plugins available... yes
2234checking for KDE paths... defaults
2235checking for dcopidl... /opt/local/bin/dcopidl
2236checking for dcopidl2cpp... /opt/local/bin/dcopidl2cpp
2237checking for meinproc... /opt/local/bin/meinproc
2238checking for xmllint... /opt/local/bin/xmllint
2239checking whether byte ordering is bigendian... no
2240checking for parport header/ppdev.h... no
2241checking for ppbus header/ppi.h... no
2242checking for libusb-config... yes
2243checking usb.h usability... yes
2244checking usb.h presence... yes
2245checking for usb.h... yes
2246checking for usb_init... configure: error: libusb not found, use ./configure LIBUSB_LIBS=...
2247Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_piklab/work/piklab-0.15.4" && ./configure --prefix=/opt/local QTDIR=/opt/local/lib/qt3 --without-arts " returned error 1
2248DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_piklab/work/piklab-0.15.4" && ./configure --prefix=/opt/local QTDIR=/opt/local/lib/qt3 --without-arts " returned error 1
2249    while executing
2250"$procedure $targetname"
2251Warning: the following items did not execute (for piklab): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
2252Error: Status 1 encountered during processing.
2253To report a bug, see <http://guide.macports.org/#project.tickets>