| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.25_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.25_0 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.25_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0 |
|---|
| 16 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 17 | :debug:main djvulibre 3.5.22_3 exists in the ports tree |
|---|
| 18 | :debug:main djvulibre 3.5.22_3 is the latest installed |
|---|
| 19 | :debug:main djvulibre 3.5.22_3 is active |
|---|
| 20 | :debug:main Merging existing variants '' into variants |
|---|
| 21 | :debug:main new fully merged portvariants: |
|---|
| 22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/djvulibre |
|---|
| 23 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main adding the default universal variant |
|---|
| 28 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 29 | :debug:main No need to upgrade! djvulibre 3.5.22_3 >= djvulibre 3.5.22_3 |
|---|
| 30 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 31 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 32 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 33 | :debug:main libiconv 1.13.1_0 is active |
|---|
| 34 | :debug:main Merging existing variants '' into variants |
|---|
| 35 | :debug:main new fully merged portvariants: |
|---|
| 36 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 37 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 38 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 42 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 43 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 44 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 45 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 46 | :debug:main jpeg 8a_0 exists in the ports tree |
|---|
| 47 | :debug:main jpeg 8a_0 is the latest installed |
|---|
| 48 | :debug:main jpeg 8a_0 is active |
|---|
| 49 | :debug:main Merging existing variants '' into variants |
|---|
| 50 | :debug:main new fully merged portvariants: |
|---|
| 51 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 52 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 53 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main adding the default universal variant |
|---|
| 57 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 58 | :debug:main No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 |
|---|
| 59 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 60 | :debug:main tiff 3.9.2_3 exists in the ports tree |
|---|
| 61 | :debug:main tiff 3.9.2_3 is the latest installed |
|---|
| 62 | :debug:main tiff 3.9.2_3 is active |
|---|
| 63 | :debug:main Merging existing variants '' into variants |
|---|
| 64 | :debug:main new fully merged portvariants: |
|---|
| 65 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff |
|---|
| 66 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 67 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 68 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 69 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 71 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 72 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 73 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 74 | :debug:main No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3 |
|---|
| 75 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 76 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 77 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 78 | :debug:main zlib 1.2.5_0 is active |
|---|
| 79 | :debug:main Merging existing variants '' into variants |
|---|
| 80 | :debug:main new fully merged portvariants: |
|---|
| 81 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 82 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 83 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 84 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 85 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 87 | :debug:main adding the default universal variant |
|---|
| 88 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 89 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 90 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 91 | :debug:main libpng 1.2.44_0 exists in the ports tree |
|---|
| 92 | :debug:main libpng 1.2.44_0 is the latest installed |
|---|
| 93 | :debug:main libpng 1.2.44_0 is active |
|---|
| 94 | :debug:main Merging existing variants '' into variants |
|---|
| 95 | :debug:main new fully merged portvariants: |
|---|
| 96 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 97 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 98 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 99 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 102 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 103 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 104 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 105 | :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0 |
|---|
| 106 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 107 | :debug:main poppler 0.14.0_1 exists in the ports tree |
|---|
| 108 | :debug:main poppler 0.14.0_1 is the latest installed |
|---|
| 109 | :debug:main poppler 0.14.0_1 is active |
|---|
| 110 | :debug:main Merging existing variants '' into variants |
|---|
| 111 | :debug:main new fully merged portvariants: |
|---|
| 112 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler |
|---|
| 113 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 114 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 115 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 116 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 117 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 118 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 119 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 120 | :debug:main No need to upgrade! poppler 0.14.0_1 >= poppler 0.14.0_1 |
|---|
| 121 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 122 | :debug:main gtk2 2.20.1_0 exists in the ports tree |
|---|
| 123 | :debug:main gtk2 2.20.1_0 +x11 is the latest installed |
|---|
| 124 | :debug:main gtk2 2.20.1_0 +x11 is active |
|---|
| 125 | :debug:main Merging existing variants '+x11' into variants |
|---|
| 126 | :debug:main new fully merged portvariants: x11 + |
|---|
| 127 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 |
|---|
| 128 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 129 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 130 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 131 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 132 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 133 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 134 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 135 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 136 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 137 | :debug:main Executing variant x11 provides x11 |
|---|
| 138 | :debug:main No need to upgrade! gtk2 2.20.1_0 >= gtk2 2.20.1_0 |
|---|
| 139 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 140 | :debug:main jasper 1.900.1_7 exists in the ports tree |
|---|
| 141 | :debug:main jasper 1.900.1_7 is the latest installed |
|---|
| 142 | :debug:main jasper 1.900.1_7 is active |
|---|
| 143 | :debug:main Merging existing variants '' into variants |
|---|
| 144 | :debug:main new fully merged portvariants: |
|---|
| 145 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper |
|---|
| 146 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 147 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 148 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 149 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 150 | :debug:main adding the default universal variant |
|---|
| 151 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 152 | :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 |
|---|
| 153 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 154 | :debug:main atk 1.30.0_0 exists in the ports tree |
|---|
| 155 | :debug:main atk 1.30.0_0 is the latest installed |
|---|
| 156 | :debug:main atk 1.30.0_0 is active |
|---|
| 157 | :debug:main Merging existing variants '' into variants |
|---|
| 158 | :debug:main new fully merged portvariants: |
|---|
| 159 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk |
|---|
| 160 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 161 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 162 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 163 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 164 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 165 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 166 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 167 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 168 | :debug:main No need to upgrade! atk 1.30.0_0 >= atk 1.30.0_0 |
|---|
| 169 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 170 | :debug:main glib2 2.24.1_0 exists in the ports tree |
|---|
| 171 | :debug:main glib2 2.24.1_0 is the latest installed |
|---|
| 172 | :debug:main glib2 2.24.1_0 is active |
|---|
| 173 | :debug:main Merging existing variants '' into variants |
|---|
| 174 | :debug:main new fully merged portvariants: |
|---|
| 175 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 |
|---|
| 176 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 177 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 178 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 179 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 180 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 181 | :debug:main adding the default universal variant |
|---|
| 182 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 183 | :debug:main No need to upgrade! glib2 2.24.1_0 >= glib2 2.24.1_0 |
|---|
| 184 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 185 | :debug:main gettext 0.18.1.1_0 exists in the ports tree |
|---|
| 186 | :debug:main gettext 0.18.1.1_0 is the latest installed |
|---|
| 187 | :debug:main gettext 0.18.1.1_0 is active |
|---|
| 188 | :debug:main Merging existing variants '' into variants |
|---|
| 189 | :debug:main new fully merged portvariants: |
|---|
| 190 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 191 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 192 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 193 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 194 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 195 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 196 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 197 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 198 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 199 | :debug:main No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0 |
|---|
| 200 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 201 | :debug:main ncurses 5.7_0 exists in the ports tree |
|---|
| 202 | :debug:main ncurses 5.7_0 is the latest installed |
|---|
| 203 | :debug:main ncurses 5.7_0 is active |
|---|
| 204 | :debug:main Merging existing variants '' into variants |
|---|
| 205 | :debug:main new fully merged portvariants: |
|---|
| 206 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 207 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 208 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 209 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 210 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 211 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 212 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 213 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 214 | :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
|---|
| 215 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 216 | :debug:main ncursesw 5.7_0 exists in the ports tree |
|---|
| 217 | :debug:main ncursesw 5.7_0 is the latest installed |
|---|
| 218 | :debug:main ncursesw 5.7_0 is active |
|---|
| 219 | :debug:main Merging existing variants '' into variants |
|---|
| 220 | :debug:main new fully merged portvariants: |
|---|
| 221 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 222 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 223 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 224 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 225 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 226 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 227 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 228 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 229 | :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
|---|
| 230 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 231 | :debug:main expat 2.0.1_0 exists in the ports tree |
|---|
| 232 | :debug:main expat 2.0.1_0 is the latest installed |
|---|
| 233 | :debug:main expat 2.0.1_0 is active |
|---|
| 234 | :debug:main Merging existing variants '' into variants |
|---|
| 235 | :debug:main new fully merged portvariants: |
|---|
| 236 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 237 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 238 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 239 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 240 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 241 | :debug:main adding the default universal variant |
|---|
| 242 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 243 | :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
|---|
| 244 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 245 | :debug:main perl5 5.8.9_0 exists in the ports tree |
|---|
| 246 | :debug:main perl5 5.8.9_0 is the latest installed |
|---|
| 247 | :debug:main perl5 5.8.9_0 is active |
|---|
| 248 | :debug:main Merging existing variants '' into variants |
|---|
| 249 | :debug:main new fully merged portvariants: |
|---|
| 250 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 251 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 252 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 253 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 254 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 255 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 256 | :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
|---|
| 257 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 258 | :debug:main perl5.8 5.8.9_3 exists in the ports tree |
|---|
| 259 | :debug:main perl5.8 5.8.9_3 is the latest installed |
|---|
| 260 | :debug:main perl5.8 5.8.9_3 is active |
|---|
| 261 | :debug:main Merging existing variants '' into variants |
|---|
| 262 | :debug:main new fully merged portvariants: |
|---|
| 263 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
|---|
| 264 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 265 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 266 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 267 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 268 | :debug:main adding the default universal variant |
|---|
| 269 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 270 | :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
|---|
| 271 | :debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$ |
|---|
| 272 | :debug:main python_select is *not* installed by MacPorts |
|---|
| 273 | :debug:main Searching for dependency: python_select |
|---|
| 274 | :debug:main Didn't find receipt, going to depspec regex for: python_select |
|---|
| 275 | :debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$ |
|---|
| 276 | :debug:main python_select not installed, soft dependency satisfied |
|---|
| 277 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 278 | :debug:main pango 1.24.5_0 exists in the ports tree |
|---|
| 279 | :debug:main pango 1.24.5_0 is the latest installed |
|---|
| 280 | :debug:main pango 1.24.5_0 is active |
|---|
| 281 | :debug:main Merging existing variants '' into variants |
|---|
| 282 | :debug:main new fully merged portvariants: |
|---|
| 283 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango |
|---|
| 284 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 285 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 287 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 288 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 289 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 290 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 291 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 292 | :debug:main No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 |
|---|
| 293 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 294 | :debug:main Xft2 2.1.14_0 exists in the ports tree |
|---|
| 295 | :debug:main Xft2 2.1.14_0 is the latest installed |
|---|
| 296 | :debug:main Xft2 2.1.14_0 is active |
|---|
| 297 | :debug:main Merging existing variants '' into variants |
|---|
| 298 | :debug:main new fully merged portvariants: |
|---|
| 299 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 300 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 301 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 302 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 303 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 304 | :debug:main adding the default universal variant |
|---|
| 305 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 306 | :debug:main No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 |
|---|
| 307 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 308 | :debug:main xrender 0.9.6_0 exists in the ports tree |
|---|
| 309 | :debug:main xrender 0.9.6_0 is the latest installed |
|---|
| 310 | :debug:main xrender 0.9.6_0 is active |
|---|
| 311 | :debug:main Merging existing variants '' into variants |
|---|
| 312 | :debug:main new fully merged portvariants: |
|---|
| 313 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 314 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 315 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 316 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 317 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | :debug:main adding the default universal variant |
|---|
| 319 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 320 | :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 |
|---|
| 321 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 322 | :debug:main xorg-libX11 1.3.4_0 exists in the ports tree |
|---|
| 323 | :debug:main xorg-libX11 1.3.4_0 is the latest installed |
|---|
| 324 | :debug:main xorg-libX11 1.3.4_0 is active |
|---|
| 325 | :debug:main Merging existing variants '' into variants |
|---|
| 326 | :debug:main new fully merged portvariants: |
|---|
| 327 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 328 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 329 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 331 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 332 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 333 | :debug:main adding the default universal variant |
|---|
| 334 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 335 | :debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 |
|---|
| 336 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 337 | :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree |
|---|
| 338 | :debug:main xorg-libXdmcp 1.0.3_0 is the latest installed |
|---|
| 339 | :debug:main xorg-libXdmcp 1.0.3_0 is active |
|---|
| 340 | :debug:main Merging existing variants '' into variants |
|---|
| 341 | :debug:main new fully merged portvariants: |
|---|
| 342 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 343 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 344 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 345 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 346 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 347 | :debug:main adding the default universal variant |
|---|
| 348 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 349 | :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
|---|
| 350 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 351 | :debug:main xorg-libXau 1.0.5_0 exists in the ports tree |
|---|
| 352 | :debug:main xorg-libXau 1.0.5_0 is the latest installed |
|---|
| 353 | :debug:main xorg-libXau 1.0.5_0 is active |
|---|
| 354 | :debug:main Merging existing variants '' into variants |
|---|
| 355 | :debug:main new fully merged portvariants: |
|---|
| 356 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 357 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 358 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 359 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 360 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 361 | :debug:main adding the default universal variant |
|---|
| 362 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 363 | :debug:main No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 |
|---|
| 364 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 365 | :debug:main xorg-xproto 7.0.17_0 exists in the ports tree |
|---|
| 366 | :debug:main xorg-xproto 7.0.17_0 is the latest installed |
|---|
| 367 | :debug:main xorg-xproto 7.0.17_0 is active |
|---|
| 368 | :debug:main Merging existing variants '' into variants |
|---|
| 369 | :debug:main new fully merged portvariants: |
|---|
| 370 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 371 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 372 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 373 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 374 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 375 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 376 | :debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 |
|---|
| 377 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 378 | :debug:main xorg-kbproto 1.0.4_0 exists in the ports tree |
|---|
| 379 | :debug:main xorg-kbproto 1.0.4_0 is the latest installed |
|---|
| 380 | :debug:main xorg-kbproto 1.0.4_0 is active |
|---|
| 381 | :debug:main Merging existing variants '' into variants |
|---|
| 382 | :debug:main new fully merged portvariants: |
|---|
| 383 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 384 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 385 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 386 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 387 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 388 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 389 | :debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
|---|
| 390 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 391 | :debug:main xorg-renderproto 0.11_0 exists in the ports tree |
|---|
| 392 | :debug:main xorg-renderproto 0.11_0 is the latest installed |
|---|
| 393 | :debug:main xorg-renderproto 0.11_0 is active |
|---|
| 394 | :debug:main Merging existing variants '' into variants |
|---|
| 395 | :debug:main new fully merged portvariants: |
|---|
| 396 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 397 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 398 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 399 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 400 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 401 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 402 | :debug:main No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 |
|---|
| 403 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 404 | :debug:main freetype 2.3.12_0 exists in the ports tree |
|---|
| 405 | :debug:main freetype 2.3.12_0 is the latest installed |
|---|
| 406 | :debug:main freetype 2.3.12_0 is active |
|---|
| 407 | :debug:main Merging existing variants '' into variants |
|---|
| 408 | :debug:main new fully merged portvariants: |
|---|
| 409 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 410 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 411 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 412 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 413 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 414 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 415 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 416 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 417 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 418 | :debug:main No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 |
|---|
| 419 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 420 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 421 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 422 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 423 | :debug:main Merging existing variants '' into variants |
|---|
| 424 | :debug:main new fully merged portvariants: |
|---|
| 425 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 426 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 427 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 428 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 429 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 430 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 431 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 432 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 433 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 434 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 435 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 436 | :debug:main cairo 1.8.10_0 exists in the ports tree |
|---|
| 437 | :debug:main cairo 1.8.10_0 is the latest installed |
|---|
| 438 | :debug:main cairo 1.8.10_0 is active |
|---|
| 439 | :debug:main Merging existing variants '' into variants |
|---|
| 440 | :debug:main new fully merged portvariants: |
|---|
| 441 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
|---|
| 442 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 443 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 444 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 445 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 446 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 447 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 448 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 449 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 450 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 451 | :debug:main No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 |
|---|
| 452 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 453 | :debug:main libpixman 0.18.2_0 exists in the ports tree |
|---|
| 454 | :debug:main libpixman 0.18.2_0 is the latest installed |
|---|
| 455 | :debug:main libpixman 0.18.2_0 is active |
|---|
| 456 | :debug:main Merging existing variants '' into variants |
|---|
| 457 | :debug:main new fully merged portvariants: |
|---|
| 458 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
|---|
| 459 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 460 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 461 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 462 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 463 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 464 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 465 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 466 | :debug:main No need to upgrade! libpixman 0.18.2_0 >= libpixman 0.18.2_0 |
|---|
| 467 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 468 | :debug:main xorg-libXi 1.3_0 exists in the ports tree |
|---|
| 469 | :debug:main xorg-libXi 1.3_0 is the latest installed |
|---|
| 470 | :debug:main xorg-libXi 1.3_0 is active |
|---|
| 471 | :debug:main Merging existing variants '' into variants |
|---|
| 472 | :debug:main new fully merged portvariants: |
|---|
| 473 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi |
|---|
| 474 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 475 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 476 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 477 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 478 | :debug:main adding the default universal variant |
|---|
| 479 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 480 | :debug:main No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0 |
|---|
| 481 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 482 | :debug:main xorg-libXext 1.1.2_0 exists in the ports tree |
|---|
| 483 | :debug:main xorg-libXext 1.1.2_0 is the latest installed |
|---|
| 484 | :debug:main xorg-libXext 1.1.2_0 is active |
|---|
| 485 | :debug:main Merging existing variants '' into variants |
|---|
| 486 | :debug:main new fully merged portvariants: |
|---|
| 487 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 488 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 489 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 490 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 491 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 492 | :debug:main adding the default universal variant |
|---|
| 493 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 494 | :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 |
|---|
| 495 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 496 | :debug:main xorg-xextproto 7.1.1_0 exists in the ports tree |
|---|
| 497 | :debug:main xorg-xextproto 7.1.1_0 is the latest installed |
|---|
| 498 | :debug:main xorg-xextproto 7.1.1_0 is active |
|---|
| 499 | :debug:main Merging existing variants '' into variants |
|---|
| 500 | :debug:main new fully merged portvariants: |
|---|
| 501 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 502 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 503 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 504 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 505 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 506 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 507 | :debug:main No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
|---|
| 508 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 509 | :debug:main xorg-inputproto 2.0_0 exists in the ports tree |
|---|
| 510 | :debug:main xorg-inputproto 2.0_0 is the latest installed |
|---|
| 511 | :debug:main xorg-inputproto 2.0_0 is active |
|---|
| 512 | :debug:main Merging existing variants '' into variants |
|---|
| 513 | :debug:main new fully merged portvariants: |
|---|
| 514 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 515 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 516 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 517 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 518 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 519 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 520 | :debug:main No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 |
|---|
| 521 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 522 | :debug:main xorg-libXrandr 1.3.0_1 exists in the ports tree |
|---|
| 523 | :debug:main xorg-libXrandr 1.3.0_1 is the latest installed |
|---|
| 524 | :debug:main xorg-libXrandr 1.3.0_1 is active |
|---|
| 525 | :debug:main Merging existing variants '' into variants |
|---|
| 526 | :debug:main new fully merged portvariants: |
|---|
| 527 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr |
|---|
| 528 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 529 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 530 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 531 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 532 | :debug:main adding the default universal variant |
|---|
| 533 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 534 | :debug:main No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 |
|---|
| 535 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 536 | :debug:main xorg-randrproto 1.3.1_0 exists in the ports tree |
|---|
| 537 | :debug:main xorg-randrproto 1.3.1_0 is the latest installed |
|---|
| 538 | :debug:main xorg-randrproto 1.3.1_0 is active |
|---|
| 539 | :debug:main Merging existing variants '' into variants |
|---|
| 540 | :debug:main new fully merged portvariants: |
|---|
| 541 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto |
|---|
| 542 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 543 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 544 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 545 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 546 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 547 | :debug:main No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 |
|---|
| 548 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 549 | :debug:main xorg-libXcursor 1.1.10_0 exists in the ports tree |
|---|
| 550 | :debug:main xorg-libXcursor 1.1.10_0 is the latest installed |
|---|
| 551 | :debug:main xorg-libXcursor 1.1.10_0 is active |
|---|
| 552 | :debug:main Merging existing variants '' into variants |
|---|
| 553 | :debug:main new fully merged portvariants: |
|---|
| 554 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor |
|---|
| 555 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 556 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 557 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 558 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 559 | :debug:main adding the default universal variant |
|---|
| 560 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 561 | :debug:main No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 |
|---|
| 562 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 563 | :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree |
|---|
| 564 | :debug:main xorg-libXfixes 4.0.5_0 is the latest installed |
|---|
| 565 | :debug:main xorg-libXfixes 4.0.5_0 is active |
|---|
| 566 | :debug:main Merging existing variants '' into variants |
|---|
| 567 | :debug:main new fully merged portvariants: |
|---|
| 568 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes |
|---|
| 569 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 570 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 571 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 572 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 573 | :debug:main adding the default universal variant |
|---|
| 574 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 575 | :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes 4.0.5_0 |
|---|
| 576 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 577 | :debug:main xorg-fixesproto 4.1.1_0 exists in the ports tree |
|---|
| 578 | :debug:main xorg-fixesproto 4.1.1_0 is the latest installed |
|---|
| 579 | :debug:main xorg-fixesproto 4.1.1_0 is active |
|---|
| 580 | :debug:main Merging existing variants '' into variants |
|---|
| 581 | :debug:main new fully merged portvariants: |
|---|
| 582 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto |
|---|
| 583 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 584 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 585 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 586 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 587 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 588 | :debug:main No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 |
|---|
| 589 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 590 | :debug:main xorg-libXinerama 1.1_0 exists in the ports tree |
|---|
| 591 | :debug:main xorg-libXinerama 1.1_0 is the latest installed |
|---|
| 592 | :debug:main xorg-libXinerama 1.1_0 is active |
|---|
| 593 | :debug:main Merging existing variants '' into variants |
|---|
| 594 | :debug:main new fully merged portvariants: |
|---|
| 595 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama |
|---|
| 596 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 597 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 598 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 599 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 600 | :debug:main adding the default universal variant |
|---|
| 601 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 602 | :debug:main No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 |
|---|
| 603 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 604 | :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree |
|---|
| 605 | :debug:main xorg-xineramaproto 1.2_0 is the latest installed |
|---|
| 606 | :debug:main xorg-xineramaproto 1.2_0 is active |
|---|
| 607 | :debug:main Merging existing variants '' into variants |
|---|
| 608 | :debug:main new fully merged portvariants: |
|---|
| 609 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto |
|---|
| 610 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 611 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 612 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 613 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 614 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 615 | :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 |
|---|
| 616 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 617 | :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree |
|---|
| 618 | :debug:main xorg-libXdamage 1.1.3_0 is the latest installed |
|---|
| 619 | :debug:main xorg-libXdamage 1.1.3_0 is active |
|---|
| 620 | :debug:main Merging existing variants '' into variants |
|---|
| 621 | :debug:main new fully merged portvariants: |
|---|
| 622 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage |
|---|
| 623 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 624 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 625 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 626 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 627 | :debug:main adding the default universal variant |
|---|
| 628 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 629 | :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0 |
|---|
| 630 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 631 | :debug:main xorg-damageproto 1.2.0_0 exists in the ports tree |
|---|
| 632 | :debug:main xorg-damageproto 1.2.0_0 is the latest installed |
|---|
| 633 | :debug:main xorg-damageproto 1.2.0_0 is active |
|---|
| 634 | :debug:main Merging existing variants '' into variants |
|---|
| 635 | :debug:main new fully merged portvariants: |
|---|
| 636 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto |
|---|
| 637 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 638 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 639 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 640 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 641 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 642 | :debug:main No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 |
|---|
| 643 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 644 | :debug:main xorg-libXcomposite 0.4.2_0 exists in the ports tree |
|---|
| 645 | :debug:main xorg-libXcomposite 0.4.2_0 is the latest installed |
|---|
| 646 | :debug:main xorg-libXcomposite 0.4.2_0 is active |
|---|
| 647 | :debug:main Merging existing variants '' into variants |
|---|
| 648 | :debug:main new fully merged portvariants: |
|---|
| 649 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite |
|---|
| 650 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 651 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 652 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 653 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 654 | :debug:main adding the default universal variant |
|---|
| 655 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 656 | :debug:main No need to upgrade! xorg-libXcomposite 0.4.2_0 >= xorg-libXcomposite 0.4.2_0 |
|---|
| 657 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 658 | :debug:main xorg-compositeproto 0.4.1_0 exists in the ports tree |
|---|
| 659 | :debug:main xorg-compositeproto 0.4.1_0 is the latest installed |
|---|
| 660 | :debug:main xorg-compositeproto 0.4.1_0 is active |
|---|
| 661 | :debug:main Merging existing variants '' into variants |
|---|
| 662 | :debug:main new fully merged portvariants: |
|---|
| 663 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto |
|---|
| 664 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 665 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 666 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 667 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 668 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 669 | :debug:main No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 |
|---|
| 670 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 671 | :debug:main shared-mime-info 0.71_0 exists in the ports tree |
|---|
| 672 | :debug:main shared-mime-info 0.71_0 is the latest installed |
|---|
| 673 | :debug:main shared-mime-info 0.71_0 is active |
|---|
| 674 | :debug:main Merging existing variants '' into variants |
|---|
| 675 | :debug:main new fully merged portvariants: |
|---|
| 676 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info |
|---|
| 677 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 678 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 679 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 680 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 681 | :debug:main adding the default universal variant |
|---|
| 682 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 683 | :debug:main No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 |
|---|
| 684 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 685 | :debug:main libxml2 2.7.7_0 exists in the ports tree |
|---|
| 686 | :debug:main libxml2 2.7.7_0 is the latest installed |
|---|
| 687 | :debug:main libxml2 2.7.7_0 is active |
|---|
| 688 | :debug:main Merging existing variants '' into variants |
|---|
| 689 | :debug:main new fully merged portvariants: |
|---|
| 690 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 691 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 692 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 693 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 694 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 695 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 696 | :debug:main adding the default universal variant |
|---|
| 697 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 698 | :debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 |
|---|
| 699 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 700 | :debug:main lcms 1.19_2 exists in the ports tree |
|---|
| 701 | :debug:main lcms 1.19_2 is the latest installed |
|---|
| 702 | :debug:main lcms 1.19_2 is active |
|---|
| 703 | :debug:main Merging existing variants '' into variants |
|---|
| 704 | :debug:main new fully merged portvariants: |
|---|
| 705 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms |
|---|
| 706 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 707 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 708 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 709 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 710 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 711 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 712 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 713 | :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 |
|---|
| 714 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 715 | :debug:main openjpeg 1.3_3 exists in the ports tree |
|---|
| 716 | :debug:main openjpeg 1.3_3 is the latest installed |
|---|
| 717 | :debug:main openjpeg 1.3_3 is active |
|---|
| 718 | :debug:main Merging existing variants '' into variants |
|---|
| 719 | :debug:main new fully merged portvariants: |
|---|
| 720 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg |
|---|
| 721 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 722 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 723 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 724 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 725 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 726 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 727 | :debug:main No need to upgrade! openjpeg 1.3_3 >= openjpeg 1.3_3 |
|---|
| 728 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 729 | :debug:main poppler-data 0.4.2_1 exists in the ports tree |
|---|
| 730 | :debug:main poppler-data 0.4.2_1 is the latest installed |
|---|
| 731 | :debug:main poppler-data 0.4.2_1 is active |
|---|
| 732 | :debug:main Merging existing variants '' into variants |
|---|
| 733 | :debug:main new fully merged portvariants: |
|---|
| 734 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler-data |
|---|
| 735 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 736 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 737 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 738 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 739 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 740 | :debug:main No need to upgrade! poppler-data 0.4.2_1 >= poppler-data 0.4.2_1 |
|---|
| 741 | :msg:main ---> Computing dependencies for pdf2djvu:info:main .:debug:main Searching for dependency: pkgconfig |
|---|
| 742 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 743 | :debug:main Searching for dependency: djvulibre |
|---|
| 744 | :debug:main Found Dependency: receipt exists for djvulibre |
|---|
| 745 | :debug:main Searching for dependency: poppler |
|---|
| 746 | :debug:main Found Dependency: receipt exists for poppler |
|---|
| 747 | :debug:main Searching for dependency: libiconv |
|---|
| 748 | :debug:main Found Dependency: receipt exists for libiconv |
|---|
| 749 | :msg:main |
|---|
| 750 | :debug:main Executing org.macports.main (pdf2djvu) |
|---|
| 751 | :debug:main Skipping completed org.macports.fetch (pdf2djvu) |
|---|
| 752 | :debug:main Skipping completed org.macports.checksum (pdf2djvu) |
|---|
| 753 | :debug:main Skipping completed org.macports.extract (pdf2djvu) |
|---|
| 754 | :debug:main Skipping completed org.macports.patch (pdf2djvu) |
|---|
| 755 | :debug:main Skipping completed org.macports.configure (pdf2djvu) |
|---|
| 756 | :msg:main ---> Building pdf2djvu |
|---|
| 757 | :debug:build build phase started at Sun Jul 11 09:50:16 EDT 2010 |
|---|
| 758 | :debug:build Executing org.macports.build (pdf2djvu) |
|---|
| 759 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_pdf2djvu/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 760 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_pdf2djvu/work/pdf2djvu-0.5.11" && /usr/bin/make -j4 all' |
|---|
| 761 | :info:build /usr/bin/g++-4.2 -pipe -O2 -arch x86_64 -Wall -I/opt/local/include -I/opt/local/include/poppler -c -o pdf-backend.o pdf-backend.cc |
|---|
| 762 | :info:build /usr/bin/g++-4.2 -pipe -O2 -arch x86_64 -Wall -I/opt/local/include -I/opt/local/include/poppler -c -o i18n.o i18n.cc |
|---|
| 763 | :info:build In file included from /usr/include/c++/4.2.1/iosfwd:45, |
|---|
| 764 | :info:build from /usr/include/c++/4.2.1/ios:43, |
|---|
| 765 | :info:build from /usr/include/c++/4.2.1/istream:44, |
|---|
| 766 | :info:build from /usr/include/c++/4.2.1/fstream:45, |
|---|
| 767 | :info:build from system.hh:12, |
|---|
| 768 | :info:build from i18n.cc:12: |
|---|
| 769 | :info:build /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/c++locale.h: In function 'int std::__convert_from_v(int* const&, char*, int, const char*, ...)': |
|---|
| 770 | :info:build /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/c++locale.h:67: error: 'libintl_setlocale' is not a member of 'std' |
|---|
| 771 | :info:build /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/c++locale.h:73: error: 'libintl_setlocale' is not a member of 'std' |
|---|
| 772 | :info:build /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/c++locale.h:89: error: 'libintl_setlocale' is not a member of 'std' |
|---|
| 773 | :info:build i18n.cc: In function 'void i18n::setup_locale()': |
|---|
| 774 | :info:build i18n.cc:18: error: 'libintl_setlocale' is not a member of 'std' |
|---|
| 775 | :info:build make: *** [i18n.o] Error 1 |
|---|
| 776 | :info:build make: *** Waiting for unfinished jobs.... |
|---|
| 777 | :info:build pdf-backend.cc: In function 'pdf::Bool annotations_callback(pdf::ant::Annotation*, void*)': |
|---|
| 778 | :info:build pdf-backend.cc:127: error: invalid conversion from 'const double*' to 'double*' |
|---|
| 779 | :info:build /opt/local/include/poppler/UTF8.h: At global scope: |
|---|
| 780 | :info:build /opt/local/include/poppler/UTF8.h:59: warning: 'int mapUCS2(Unicode, char*, int)' defined but not used |
|---|
| 781 | :info:build make: *** [pdf-backend.o] Error 1 |
|---|
| 782 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_pdf2djvu/work/pdf2djvu-0.5.11" && /usr/bin/make -j4 all " returned error 2 |
|---|
| 783 | :error:build Target org.macports.build returned: shell command failed |
|---|
| 784 | :debug:build Backtrace: shell command failed |
|---|
| 785 | while executing |
|---|
| 786 | "command_exec build" |
|---|
| 787 | (procedure "portbuild::build_main" line 8) |
|---|
| 788 | invoked from within |
|---|
| 789 | "$procedure $targetname" |
|---|
| 790 | :info:build Warning: the following items did not execute (for pdf2djvu): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 791 | :notice:build Log for pdf2djvu is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_pdf2djvu/main.log |
|---|
