1 | version:1 |
---|
2 | :debug:main epoch: in tree: 0 installed: 0 |
---|
3 | :debug:main expat 2.0.1_0 exists in the ports tree |
---|
4 | :debug:main expat 2.0.1_0 is the latest installed |
---|
5 | :debug:main expat 2.0.1_0 is active |
---|
6 | :debug:main Merging existing variants '' into variants |
---|
7 | :debug:main new fully merged portvariants: |
---|
8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
9 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
13 | :debug:main adding the default universal variant |
---|
14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
15 | :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
---|
16 | :debug:main epoch: in tree: 0 installed: 0 |
---|
17 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
---|
18 | :debug:main fontconfig 2.8.0_0 is the latest installed |
---|
19 | :debug:main fontconfig 2.8.0_0 is active |
---|
20 | :debug:main Merging existing variants '' into variants |
---|
21 | :debug:main new fully merged portvariants: |
---|
22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
---|
23 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
27 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
28 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
29 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
30 | :debug:main universal variant already exists, so not adding the default one |
---|
31 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
---|
32 | :debug:main epoch: in tree: 0 installed: 0 |
---|
33 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
---|
34 | :debug:main libiconv 1.13.1_0 is the latest installed |
---|
35 | :debug:main libiconv 1.13.1_0 is active |
---|
36 | :debug:main Merging existing variants '' into variants |
---|
37 | :debug:main new fully merged portvariants: |
---|
38 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
39 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
40 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
41 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
42 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
43 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
44 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
45 | :debug:main universal variant already exists, so not adding the default one |
---|
46 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
---|
47 | :debug:main epoch: in tree: 0 installed: 0 |
---|
48 | :debug:main freetype 2.4.1_0 exists in the ports tree |
---|
49 | :debug:main freetype 2.4.1_0 is the latest installed |
---|
50 | :debug:main freetype 2.4.1_0 is active |
---|
51 | :debug:main Merging existing variants '' into variants |
---|
52 | :debug:main new fully merged portvariants: |
---|
53 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
---|
54 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
55 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
56 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
57 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
58 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
59 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
60 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
61 | :debug:main universal variant already exists, so not adding the default one |
---|
62 | :debug:main No need to upgrade! freetype 2.4.1_0 >= freetype 2.4.1_0 |
---|
63 | :debug:main epoch: in tree: 0 installed: 0 |
---|
64 | :debug:main zlib 1.2.5_0 exists in the ports tree |
---|
65 | :debug:main zlib 1.2.5_0 is the latest installed |
---|
66 | :debug:main zlib 1.2.5_0 is active |
---|
67 | :debug:main Merging existing variants '' into variants |
---|
68 | :debug:main new fully merged portvariants: |
---|
69 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
---|
70 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
71 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
72 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
73 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
74 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
---|
75 | :debug:main adding the default universal variant |
---|
76 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
77 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
---|
78 | :debug:main epoch: in tree: 0 installed: 0 |
---|
79 | :debug:main gd2 2.0.35_7 exists in the ports tree |
---|
80 | :debug:main gd2 2.0.35_7 is the latest installed |
---|
81 | :debug:main gd2 2.0.35_7 is active |
---|
82 | :debug:main Merging existing variants '' into variants |
---|
83 | :debug:main new fully merged portvariants: |
---|
84 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2 |
---|
85 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
86 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
87 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
88 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
89 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
90 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
91 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
92 | :debug:main universal variant already exists, so not adding the default one |
---|
93 | :debug:main No need to upgrade! gd2 2.0.35_7 >= gd2 2.0.35_7 |
---|
94 | :debug:main epoch: in tree: 0 installed: 0 |
---|
95 | :debug:main libpng 1.2.44_0 exists in the ports tree |
---|
96 | :debug:main libpng 1.2.44_0 is the latest installed |
---|
97 | :debug:main libpng 1.2.44_0 is active |
---|
98 | :debug:main Merging existing variants '' into variants |
---|
99 | :debug:main new fully merged portvariants: |
---|
100 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
---|
101 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
102 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
103 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
104 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
105 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
106 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
107 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
108 | :debug:main universal variant already exists, so not adding the default one |
---|
109 | :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0 |
---|
110 | :debug:main epoch: in tree: 0 installed: 0 |
---|
111 | :debug:main jpeg 8b_0 exists in the ports tree |
---|
112 | :debug:main jpeg 8b_0 is the latest installed |
---|
113 | :debug:main jpeg 8b_0 is active |
---|
114 | :debug:main Merging existing variants '' into variants |
---|
115 | :debug:main new fully merged portvariants: |
---|
116 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
---|
117 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
118 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
119 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
120 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
121 | :debug:main adding the default universal variant |
---|
122 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
123 | :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0 |
---|
124 | :debug:main epoch: in tree: 0 installed: 0 |
---|
125 | :debug:main xpm 3.5.8_0 exists in the ports tree |
---|
126 | :debug:main xpm 3.5.8_0 is the latest installed |
---|
127 | :debug:main xpm 3.5.8_0 is active |
---|
128 | :debug:main Merging existing variants '' into variants |
---|
129 | :debug:main new fully merged portvariants: |
---|
130 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm |
---|
131 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
132 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
133 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
134 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
135 | :debug:main adding the default universal variant |
---|
136 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
137 | :debug:main No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0 |
---|
138 | :debug:main epoch: in tree: 0 installed: 0 |
---|
139 | :debug:main xorg-libXt 1.0.8_0 exists in the ports tree |
---|
140 | :debug:main xorg-libXt 1.0.8_0 is the latest installed |
---|
141 | :debug:main xorg-libXt 1.0.8_0 is active |
---|
142 | :debug:main Merging existing variants '' into variants |
---|
143 | :debug:main new fully merged portvariants: |
---|
144 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
---|
145 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
146 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
147 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
148 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
149 | :debug:main adding the default universal variant |
---|
150 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
151 | :debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0 |
---|
152 | :debug:main epoch: in tree: 0 installed: 0 |
---|
153 | :debug:main xorg-libsm 1.1.1_0 exists in the ports tree |
---|
154 | :debug:main xorg-libsm 1.1.1_0 is the latest installed |
---|
155 | :debug:main xorg-libsm 1.1.1_0 is active |
---|
156 | :debug:main Merging existing variants '' into variants |
---|
157 | :debug:main new fully merged portvariants: |
---|
158 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
---|
159 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
160 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
161 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
162 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
163 | :debug:main adding the default universal variant |
---|
164 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
165 | :debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 |
---|
166 | :debug:main epoch: in tree: 0 installed: 0 |
---|
167 | :debug:main xorg-libice 1.0.6_0 exists in the ports tree |
---|
168 | :debug:main xorg-libice 1.0.6_0 is the latest installed |
---|
169 | :debug:main xorg-libice 1.0.6_0 is active |
---|
170 | :debug:main Merging existing variants '' into variants |
---|
171 | :debug:main new fully merged portvariants: |
---|
172 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
---|
173 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
174 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
175 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
176 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
177 | :debug:main adding the default universal variant |
---|
178 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
179 | :debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 |
---|
180 | :debug:main epoch: in tree: 0 installed: 0 |
---|
181 | :debug:main xorg-xproto 7.0.17_0 exists in the ports tree |
---|
182 | :debug:main xorg-xproto 7.0.17_0 is the latest installed |
---|
183 | :debug:main xorg-xproto 7.0.17_0 is active |
---|
184 | :debug:main Merging existing variants '' into variants |
---|
185 | :debug:main new fully merged portvariants: |
---|
186 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
---|
187 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
188 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
189 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
190 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
191 | :debug:main only one arch supported, so not adding the default universal variant |
---|
192 | :debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 |
---|
193 | :debug:main epoch: in tree: 0 installed: 0 |
---|
194 | :debug:main xorg-libX11 1.3.4_0 exists in the ports tree |
---|
195 | :debug:main xorg-libX11 1.3.4_0 is the latest installed |
---|
196 | :debug:main xorg-libX11 1.3.4_0 is active |
---|
197 | :debug:main Merging existing variants '' into variants |
---|
198 | :debug:main new fully merged portvariants: |
---|
199 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
---|
200 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
201 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
202 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
203 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
204 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
205 | :debug:main adding the default universal variant |
---|
206 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
207 | :debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 |
---|
208 | :debug:main epoch: in tree: 0 installed: 0 |
---|
209 | :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree |
---|
210 | :debug:main xorg-libXdmcp 1.0.3_0 is the latest installed |
---|
211 | :debug:main xorg-libXdmcp 1.0.3_0 is active |
---|
212 | :debug:main Merging existing variants '' into variants |
---|
213 | :debug:main new fully merged portvariants: |
---|
214 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
---|
215 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
216 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
217 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
218 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
219 | :debug:main adding the default universal variant |
---|
220 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
221 | :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
---|
222 | :debug:main epoch: in tree: 0 installed: 0 |
---|
223 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
---|
224 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
---|
225 | :debug:main xorg-libXau 1.0.6_0 is active |
---|
226 | :debug:main Merging existing variants '' into variants |
---|
227 | :debug:main new fully merged portvariants: |
---|
228 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
---|
229 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
230 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
231 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
232 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
233 | :debug:main adding the default universal variant |
---|
234 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
235 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
---|
236 | :debug:main epoch: in tree: 0 installed: 0 |
---|
237 | :debug:main xorg-kbproto 1.0.4_0 exists in the ports tree |
---|
238 | :debug:main xorg-kbproto 1.0.4_0 is the latest installed |
---|
239 | :debug:main xorg-kbproto 1.0.4_0 is active |
---|
240 | :debug:main Merging existing variants '' into variants |
---|
241 | :debug:main new fully merged portvariants: |
---|
242 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
---|
243 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
244 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
245 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
246 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
247 | :debug:main only one arch supported, so not adding the default universal variant |
---|
248 | :debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
---|
249 | :debug:main epoch: in tree: 0 installed: 0 |
---|
250 | :debug:main xorg-libXext 1.1.2_0 exists in the ports tree |
---|
251 | :debug:main xorg-libXext 1.1.2_0 is the latest installed |
---|
252 | :debug:main xorg-libXext 1.1.2_0 is active |
---|
253 | :debug:main Merging existing variants '' into variants |
---|
254 | :debug:main new fully merged portvariants: |
---|
255 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
---|
256 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
257 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
258 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
259 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
260 | :debug:main adding the default universal variant |
---|
261 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
262 | :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 |
---|
263 | :debug:main epoch: in tree: 0 installed: 0 |
---|
264 | :debug:main xorg-xextproto 7.1.1_0 exists in the ports tree |
---|
265 | :debug:main xorg-xextproto 7.1.1_0 is the latest installed |
---|
266 | :debug:main xorg-xextproto 7.1.1_0 is active |
---|
267 | :debug:main Merging existing variants '' into variants |
---|
268 | :debug:main new fully merged portvariants: |
---|
269 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
---|
270 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
271 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
272 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
273 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
274 | :debug:main only one arch supported, so not adding the default universal variant |
---|
275 | :debug:main No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
---|
276 | :debug:main epoch: in tree: 0 installed: 0 |
---|
277 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
---|
278 | :debug:main gettext 0.18.1.1_2 is the latest installed |
---|
279 | :debug:main gettext 0.18.1.1_2 is active |
---|
280 | :debug:main Merging existing variants '' into variants |
---|
281 | :debug:main new fully merged portvariants: |
---|
282 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
283 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
284 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
285 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
286 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
287 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
288 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
289 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
290 | :debug:main universal variant already exists, so not adding the default one |
---|
291 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
---|
292 | :debug:main epoch: in tree: 0 installed: 0 |
---|
293 | :debug:main ncurses 5.7_0 exists in the ports tree |
---|
294 | :debug:main ncurses 5.7_0 is the latest installed |
---|
295 | :debug:main ncurses 5.7_0 is active |
---|
296 | :debug:main Merging existing variants '' into variants |
---|
297 | :debug:main new fully merged portvariants: |
---|
298 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
299 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
300 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
301 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
302 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
303 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
304 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
305 | :debug:main universal variant already exists, so not adding the default one |
---|
306 | :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
---|
307 | :debug:main epoch: in tree: 0 installed: 0 |
---|
308 | :debug:main ncursesw 5.7_0 exists in the ports tree |
---|
309 | :debug:main ncursesw 5.7_0 is the latest installed |
---|
310 | :debug:main ncursesw 5.7_0 is active |
---|
311 | :debug:main Merging existing variants '' into variants |
---|
312 | :debug:main new fully merged portvariants: |
---|
313 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
314 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
315 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
316 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
317 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
318 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
319 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
320 | :debug:main universal variant already exists, so not adding the default one |
---|
321 | :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
---|
322 | :debug:main epoch: in tree: 0 installed: 0 |
---|
323 | :debug:main pdflib 7.0.5_0 exists in the ports tree |
---|
324 | :debug:main pdflib 7.0.5_0 is the latest installed |
---|
325 | :debug:main pdflib 7.0.5_0 is active |
---|
326 | :debug:main Merging existing variants '' into variants |
---|
327 | :debug:main new fully merged portvariants: |
---|
328 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/pdflib |
---|
329 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
330 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
331 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
332 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
333 | :debug:main adding the default universal variant |
---|
334 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
335 | :debug:main No need to upgrade! pdflib 7.0.5_0 >= pdflib 7.0.5_0 |
---|
336 | :debug:main epoch: in tree: 0 installed: 0 |
---|
337 | :debug:main readline 6.1.000_1 exists in the ports tree |
---|
338 | :debug:main readline 6.1.000_1 is the latest installed |
---|
339 | :debug:main readline 6.1.000_1 is active |
---|
340 | :debug:main Merging existing variants '' into variants |
---|
341 | :debug:main new fully merged portvariants: |
---|
342 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
---|
343 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
344 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
345 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
346 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
347 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
348 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
349 | :debug:main universal variant already exists, so not adding the default one |
---|
350 | :debug:main No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 |
---|
351 | :debug:main epoch: in tree: 0 installed: 0 |
---|
352 | :debug:main aquaterm 1.0.1_5 exists in the ports tree |
---|
353 | :debug:main aquaterm 1.0.1_5 is the latest installed |
---|
354 | :debug:main aquaterm 1.0.1_5 is active |
---|
355 | :debug:main Merging existing variants '' into variants |
---|
356 | :debug:main new fully merged portvariants: |
---|
357 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/aquaterm |
---|
358 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
---|
359 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
360 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
361 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
362 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl |
---|
363 | :debug:main Re-registering default for use_configure |
---|
364 | :debug:main Re-registering default for universal_variant |
---|
365 | :debug:main Re-registering default for build.pre_args |
---|
366 | :debug:main Re-registering default for build.target |
---|
367 | :debug:main Re-registering default for destroot.pre_args |
---|
368 | :debug:main Re-registering default for destroot.target |
---|
369 | :debug:main Re-registering default for destroot.destdir |
---|
370 | :debug:main adding the default universal variant |
---|
371 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
372 | :debug:main No need to upgrade! aquaterm 1.0.1_5 >= aquaterm 1.0.1_5 |
---|
373 | :msg:main ---> Computing dependencies for gnuplot:msg:main |
---|
374 | :debug:main Searching for dependency: expat |
---|
375 | :debug:main Found Dependency: receipt exists for expat |
---|
376 | :debug:main Searching for dependency: fontconfig |
---|
377 | :debug:main Found Dependency: receipt exists for fontconfig |
---|
378 | :debug:main Searching for dependency: gd2 |
---|
379 | :debug:main Found Dependency: receipt exists for gd2 |
---|
380 | :debug:main Searching for dependency: jpeg |
---|
381 | :debug:main Found Dependency: receipt exists for jpeg |
---|
382 | :debug:main Searching for dependency: pdflib |
---|
383 | :debug:main Found Dependency: receipt exists for pdflib |
---|
384 | :debug:main Searching for dependency: libiconv |
---|
385 | :debug:main Found Dependency: receipt exists for libiconv |
---|
386 | :debug:main Searching for dependency: libpng |
---|
387 | :debug:main Found Dependency: receipt exists for libpng |
---|
388 | :debug:main Searching for dependency: ncurses |
---|
389 | :debug:main Found Dependency: receipt exists for ncurses |
---|
390 | :debug:main Searching for dependency: readline |
---|
391 | :debug:main Found Dependency: receipt exists for readline |
---|
392 | :debug:main Searching for dependency: xpm |
---|
393 | :debug:main Found Dependency: receipt exists for xpm |
---|
394 | :debug:main Searching for dependency: zlib |
---|
395 | :debug:main Found Dependency: receipt exists for zlib |
---|
396 | :debug:main Searching for dependency: aquaterm |
---|
397 | :debug:main Found Dependency: receipt exists for aquaterm |
---|
398 | :debug:main Executing org.macports.main (gnuplot) |
---|
399 | :debug:main Skipping completed org.macports.fetch (gnuplot) |
---|
400 | :debug:main Skipping completed org.macports.checksum (gnuplot) |
---|
401 | :debug:main Skipping completed org.macports.extract (gnuplot) |
---|
402 | :debug:main Skipping completed org.macports.patch (gnuplot) |
---|
403 | :debug:main Skipping completed org.macports.configure (gnuplot) |
---|
404 | :debug:main Skipping completed org.macports.build (gnuplot) |
---|
405 | :msg:main ---> Staging gnuplot into destroot |
---|
406 | :info:main . missing (directory not created: File exists) |
---|
407 | :info:main ./Applications missing (directory not created: File exists) |
---|
408 | :info:main ./Developer missing (directory not created: File exists) |
---|
409 | :info:main ./Library missing (directory not created: File exists) |
---|
410 | :debug:destroot destroot phase started at Tue Aug 3 10:06:13 PDT 2010 |
---|
411 | :debug:destroot Executing org.macports.destroot (gnuplot) |
---|
412 | :debug:destroot Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
---|
413 | :debug:destroot Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/gnuplot-4.4.0" && /usr/bin/make install prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local' |
---|
414 | :info:destroot Making install in config |
---|
415 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
416 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
---|
417 | :info:destroot Making install in m4 |
---|
418 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
419 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
---|
420 | :info:destroot Making install in term |
---|
421 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
422 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js" |
---|
423 | :info:destroot /usr/bin/install -c -m 644 js/canvasmath.js js/canvastext.js js/gnuplot_common.js js/gnuplot_mouse.js js/grid.png js/help.png js/nextzoom.png js/previouszoom.png js/textzoom.png js/gnuplot_mouse.css js/README '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js' |
---|
424 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua" |
---|
425 | :info:destroot /usr/bin/install -c -m 644 lua/gnuplot-tikz.lua '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua' |
---|
426 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript" |
---|
427 | :info:destroot /usr/bin/install -c -m 644 PostScript/8859-15.ps PostScript/8859-1.ps PostScript/8859-2.ps PostScript/8859-9.ps PostScript/cp1250.ps PostScript/cp437.ps PostScript/cp850.ps PostScript/cp852.ps PostScript/koi8r.ps PostScript/koi8u.ps PostScript/prologue.ps PostScript/utf-8.ps PostScript/aglfn.txt '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript' |
---|
428 | :info:destroot Making install in src |
---|
429 | :info:destroot Making install in wxterminal |
---|
430 | :info:destroot make[3]: Nothing to be done for `install-exec-am'. |
---|
431 | :info:destroot make[3]: Nothing to be done for `install-data-am'. |
---|
432 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin" |
---|
433 | :info:destroot /usr/bin/install -c gnuplot '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin' |
---|
434 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4" |
---|
435 | :info:destroot /usr/bin/install -c gnuplot_x11 '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4' |
---|
436 | :info:destroot make[3]: Nothing to be done for `install-data-am'. |
---|
437 | :info:destroot Making install in docs |
---|
438 | :info:destroot ../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4 |
---|
439 | :info:destroot /usr/bin/install -c -m 644 gnuplot.gih /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/gnuplot.gih |
---|
440 | :info:destroot ../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info |
---|
441 | :info:destroot /usr/bin/install -c -m 644 gnuplot.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info/gnuplot.info |
---|
442 | :info:destroot install-info --info-dir=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info/gnuplot.info |
---|
443 | :info:destroot Making install in lisp |
---|
444 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
445 | :info:destroot /usr/bin/make install-data-hook |
---|
446 | :info:destroot /bin/sh ./../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp |
---|
447 | :info:destroot /usr/bin/install -c -m 644 gnuplot-gui.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot-gui.el |
---|
448 | :info:destroot /usr/bin/install -c -m 644 gnuplot.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot.el |
---|
449 | :info:destroot /usr/bin/install -c -m 644 info-look.20.2.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/info-look.20.2.el |
---|
450 | :info:destroot /usr/bin/install -c -m 644 info-look.20.3.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/info-look.20.3.el |
---|
451 | :info:destroot /bin/sh ./../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp |
---|
452 | :info:destroot /usr/bin/install -c -m 644 gnuplot.elc /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot.elc |
---|
453 | :info:destroot /usr/bin/install -c -m 644 gnuplot-gui.elc /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot-gui.elc |
---|
454 | :info:destroot Making install in man |
---|
455 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
456 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1" |
---|
457 | :info:destroot /usr/bin/install -c -m 644 gnuplot.1 '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1' |
---|
458 | :info:destroot /usr/bin/make install-data-hook |
---|
459 | :info:destroot make[3]: Nothing to be done for `install-data-hook'. |
---|
460 | :info:destroot Making install in demo |
---|
461 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
462 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
---|
463 | :info:destroot Making install in tutorial |
---|
464 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
465 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
---|
466 | :info:destroot Making install in share |
---|
467 | :info:destroot make[3]: Nothing to be done for `install-exec-am'. |
---|
468 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults" |
---|
469 | :info:destroot /usr/bin/install -c -m 644 Gnuplot '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults' |
---|
470 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
---|
471 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
---|
472 | :debug:destroot Executing proc-post-org.macports.destroot-destroot-0 |
---|
473 | :error:destroot Target org.macports.destroot returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/gnuplot/gnuplot-4.4.0.pdf, No such file or directory |
---|
474 | :debug:destroot Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/gnuplot/gnuplot-4.4.0.pdf, No such file or directory |
---|
475 | while executing |
---|
476 | "$post $targetname" |
---|
477 | :info:destroot Warning: the following items did not execute (for gnuplot): org.macports.activate org.macports.destroot org.macports.install |
---|
478 | :notice:destroot Log for gnuplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/main.log |
---|