| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main gmp 5.0.1_0 exists in the ports tree |
|---|
| 4 | :debug:main gmp 5.0.1_0 is the latest installed |
|---|
| 5 | :debug:main gmp 5.0.1_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 9 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 16 | :debug:main No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 |
|---|
| 17 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 18 | :debug:main mpfr 3.0.0-p7_0 exists in the ports tree |
|---|
| 19 | :debug:main mpfr 3.0.0-p7_0 is the latest installed |
|---|
| 20 | :debug:main mpfr 3.0.0-p7_0 is active |
|---|
| 21 | :debug:main Merging existing variants '' into variants |
|---|
| 22 | :debug:main new fully merged portvariants: |
|---|
| 23 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
|---|
| 24 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 25 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 29 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 30 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 31 | :debug:main No need to upgrade! mpfr 3.0.0-p7_0 >= mpfr 3.0.0-p7_0 |
|---|
| 32 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 33 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 34 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 35 | :debug:main libiconv 1.13.1_0 is active |
|---|
| 36 | :debug:main Merging existing variants '' into variants |
|---|
| 37 | :debug:main new fully merged portvariants: |
|---|
| 38 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 39 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 40 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 44 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 45 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 46 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 47 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 48 | :debug:main libmpc 0.8.2_0 exists in the ports tree |
|---|
| 49 | :debug:main libmpc 0.8.2_0 is the latest installed |
|---|
| 50 | :debug:main libmpc 0.8.2_0 is active |
|---|
| 51 | :debug:main Merging existing variants '' into variants |
|---|
| 52 | :debug:main new fully merged portvariants: |
|---|
| 53 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libmpc |
|---|
| 54 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 55 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 57 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 58 | :debug:main adding the default universal variant |
|---|
| 59 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 60 | :debug:main No need to upgrade! libmpc 0.8.2_0 >= libmpc 0.8.2_0 |
|---|
| 61 | :msg:main ---> Computing dependencies for gcc45:msg:main |
|---|
| 62 | :debug:main Searching for dependency: gmp |
|---|
| 63 | :debug:main Found Dependency: receipt exists for gmp |
|---|
| 64 | :debug:main Searching for dependency: mpfr |
|---|
| 65 | :debug:main Found Dependency: receipt exists for mpfr |
|---|
| 66 | :debug:main Searching for dependency: libiconv |
|---|
| 67 | :debug:main Found Dependency: receipt exists for libiconv |
|---|
| 68 | :debug:main Searching for dependency: libmpc |
|---|
| 69 | :debug:main Found Dependency: receipt exists for libmpc |
|---|
| 70 | :debug:main Executing org.macports.main (gcc45) |
|---|
| 71 | :debug:main Skipping completed org.macports.fetch (gcc45) |
|---|
| 72 | :debug:main Skipping completed org.macports.checksum (gcc45) |
|---|
| 73 | :debug:main setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 74 | :debug:main Skipping completed org.macports.extract (gcc45) |
|---|
| 75 | :debug:main Skipping completed org.macports.patch (gcc45) |
|---|
| 76 | :debug:main Skipping completed org.macports.configure (gcc45) |
|---|
| 77 | :msg:main ---> Building gcc45 |
|---|
| 78 | :debug:build build phase started at Sun Oct 31 00:57:44 CEST 2010 |
|---|
| 79 | :debug:build Executing org.macports.build (gcc45) |
|---|
| 80 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 81 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build" && /usr/bin/make -j4 bootstrap' |
|---|
| 82 | :info:build echo stage3 > stage_final |
|---|
| 83 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 84 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 85 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 86 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 87 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 88 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 89 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 90 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 91 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 92 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 93 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 94 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 95 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 96 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 97 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `crt3.o' |
|---|
| 98 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `crt3.o' |
|---|
| 99 | :info:build Checking multilib configuration for libgcc... |
|---|
| 100 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 101 | :info:build # multilibs. |
|---|
| 102 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 103 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 104 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 105 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 106 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 107 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 108 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 109 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 110 | :info:build # number will be embedded in debug information. |
|---|
| 111 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 112 | :info:build && cd ../.././gcc \ |
|---|
| 113 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 114 | :info:build MULTILIB_CFLAGS="-g -O2" \ |
|---|
| 115 | :info:build T=$T \ |
|---|
| 116 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 117 | :info:build T_TARGET |
|---|
| 118 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 119 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 120 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 121 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 122 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 123 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 124 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 125 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 126 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 127 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 128 | :info:build if [ -z "i386" ]; then \ |
|---|
| 129 | :info:build true; \ |
|---|
| 130 | :info:build else \ |
|---|
| 131 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 132 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgcc; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 133 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 134 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 135 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 136 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 137 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 138 | :info:build true; \ |
|---|
| 139 | :info:build else \ |
|---|
| 140 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 141 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 142 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make "AR=/usr/bin/ar" "AR_FLAGS=rc" "CC=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " "CFLAGS=-g -O2" "DESTDIR=" "EXTRA_OFILES=" "HDEFINES=" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "LDFLAGS=" "LOADLIBES=" "RANLIB=/usr/bin/ranlib" "SHELL=/bin/sh" "prefix=/opt/local" "exec_prefix=/opt/local" "libdir=/opt/local/lib/gcc45" "libsubdir=/opt/local/lib/gcc45/gcc/x86_64-apple-darwin10/4.5.0" "tooldir=/opt/local/x86_64-apple-darwin10" \ |
|---|
| 143 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 144 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 145 | :info:build FCFLAGS=" ${flags}" \ |
|---|
| 146 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 147 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 148 | :info:build prefix="/opt/local" \ |
|---|
| 149 | :info:build exec_prefix="/opt/local" \ |
|---|
| 150 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 151 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 152 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 153 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 154 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 155 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 156 | :info:build DESTDIR="" \ |
|---|
| 157 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 158 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 159 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 160 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 161 | :info:build all); then \ |
|---|
| 162 | :info:build true; \ |
|---|
| 163 | :info:build else \ |
|---|
| 164 | :info:build exit 1; \ |
|---|
| 165 | :info:build fi; \ |
|---|
| 166 | :info:build else true; \ |
|---|
| 167 | :info:build fi; \ |
|---|
| 168 | :info:build fi; \ |
|---|
| 169 | :info:build done; \ |
|---|
| 170 | :info:build fi |
|---|
| 171 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 172 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 173 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 174 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 175 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 176 | :info:build for file in $parts; do \ |
|---|
| 177 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 178 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 179 | :info:build done |
|---|
| 180 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 181 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 182 | :info:build for file in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib; do \ |
|---|
| 183 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 184 | :info:build ln -s ../$file ../../.././gcc/i386/; \ |
|---|
| 185 | :info:build done |
|---|
| 186 | :info:build # multilibs. |
|---|
| 187 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 188 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 189 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 190 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 191 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 192 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 193 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 194 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 195 | :info:build # number will be embedded in debug information. |
|---|
| 196 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 197 | :info:build && cd ../../.././gcc \ |
|---|
| 198 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 199 | :info:build MULTILIB_CFLAGS="-g -O2 -m32" \ |
|---|
| 200 | :info:build T=$T \ |
|---|
| 201 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 202 | :info:build T_TARGET |
|---|
| 203 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 204 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 205 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 206 | :info:build rm -f ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 207 | :info:build # more uses than just a directory name. |
|---|
| 208 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 209 | :info:build ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 210 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs . |
|---|
| 211 | :info:build rm -f ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 212 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o ./libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o fixtfti_s.o fixunstfti_s.o floattitf_s.o floatuntitf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 213 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 214 | :info:build ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 215 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 216 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 217 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 218 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 219 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 220 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 221 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 222 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 223 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 224 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 225 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 226 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 227 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 228 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 229 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 230 | :info:build for file in $parts; do \ |
|---|
| 231 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 232 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 233 | :info:build done |
|---|
| 234 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 235 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 236 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 237 | :info:build # more uses than just a directory name. |
|---|
| 238 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs i386 |
|---|
| 239 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o i386/libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -m32 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o tf-signs_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 240 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 241 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 242 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 243 | :info:build # of the build tree, for now. |
|---|
| 244 | :info:build /usr/bin/make install-leaf DESTDIR=../../.././gcc \ |
|---|
| 245 | :info:build slibdir= libsubdir= MULTIOSDIR=i386 |
|---|
| 246 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 247 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../../.././gcc/i386/ |
|---|
| 248 | :info:build chmod 644 ../../.././gcc/i386/libgcc_eh.a |
|---|
| 249 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc_eh.a |
|---|
| 250 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 251 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 252 | :info:build /usr/bin/install -c -m 644 libgcc.a ../../.././gcc/i386/ |
|---|
| 253 | :info:build chmod 644 ../../.././gcc/i386/libgcc.a |
|---|
| 254 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc.a |
|---|
| 255 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_trampoline.o) has no symbols |
|---|
| 256 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_ctors.o) has no symbols |
|---|
| 257 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_powitf2.o) has no symbols |
|---|
| 258 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_multc3.o) has no symbols |
|---|
| 259 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_divtc3.o) has no symbols |
|---|
| 260 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 261 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 262 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatditf.o) has no symbols |
|---|
| 263 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 264 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixsfti.o) has no symbols |
|---|
| 265 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixdfti.o) has no symbols |
|---|
| 266 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixxfti.o) has no symbols |
|---|
| 267 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 268 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunssfti.o) has no symbols |
|---|
| 269 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsdfti.o) has no symbols |
|---|
| 270 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsxfti.o) has no symbols |
|---|
| 271 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 272 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattisf.o) has no symbols |
|---|
| 273 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattidf.o) has no symbols |
|---|
| 274 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattixf.o) has no symbols |
|---|
| 275 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattitf.o) has no symbols |
|---|
| 276 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntisf.o) has no symbols |
|---|
| 277 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntidf.o) has no symbols |
|---|
| 278 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntixf.o) has no symbols |
|---|
| 279 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 280 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(darwin-64.o) has no symbols |
|---|
| 281 | :info:build /usr/bin/install -c -m 644 libgcov.a ../../.././gcc/i386/ |
|---|
| 282 | :info:build chmod 644 ../../.././gcc/i386/libgcov.a |
|---|
| 283 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcov.a |
|---|
| 284 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 285 | :info:build for file in $parts; do \ |
|---|
| 286 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 287 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 288 | :info:build done |
|---|
| 289 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 290 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 291 | :info:build cp ../${mlib}/libgcc/${mlib}/libgcc_s.dylib \ |
|---|
| 292 | :info:build ./libgcc_s.1.dylib_T_${mlib} || exit 1 ; \ |
|---|
| 293 | :info:build done |
|---|
| 294 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 295 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 296 | :info:build /usr/bin/strip -o libgcc_ext.10.4.dylib_T${mlib} \ |
|---|
| 297 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.4.ver -c -urx \ |
|---|
| 298 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 299 | :info:build done |
|---|
| 300 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 301 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 302 | :info:build /usr/bin/strip -o libgcc_ext.10.5.dylib_T${mlib} \ |
|---|
| 303 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.5.ver -c -urx \ |
|---|
| 304 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 305 | :info:build done |
|---|
| 306 | :info:build lipo -output libgcc_ext.10.4.dylib -create libgcc_ext.10.4.dylib_T* |
|---|
| 307 | :info:build lipo -output libgcc_s.1.dylib \ |
|---|
| 308 | :info:build -create libgcc_s.1.dylib_T* |
|---|
| 309 | :info:build lipo -output libgcc_ext.10.5.dylib -create libgcc_ext.10.5.dylib_T* |
|---|
| 310 | :info:build rm libgcc_ext.10.4.dylib_T* |
|---|
| 311 | :info:build rm libgcc_ext.10.5.dylib_T* |
|---|
| 312 | :info:build rm libgcc_s.1.dylib_T* |
|---|
| 313 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 314 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 315 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 316 | :info:build # of the build tree, for now. |
|---|
| 317 | :info:build /usr/bin/make install-leaf DESTDIR=../.././gcc \ |
|---|
| 318 | :info:build slibdir= libsubdir= MULTIOSDIR=. |
|---|
| 319 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 320 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 321 | :info:build for d in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib ; do \ |
|---|
| 322 | :info:build /usr/bin/install -c -m 644 $d ../.././gcc/$d || exit 1 ; \ |
|---|
| 323 | :info:build done |
|---|
| 324 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../.././gcc/ |
|---|
| 325 | :info:build chmod 644 ../.././gcc/libgcc_eh.a |
|---|
| 326 | :info:build /usr/bin/ranlib ../.././gcc/libgcc_eh.a |
|---|
| 327 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 328 | :info:build if [ -f ../.././gcc/libgcc_s_ppc64.1.dylib ]; then \ |
|---|
| 329 | :info:build rm -f ../.././gcc/libgcc_s_ppc64.1.dylib; \ |
|---|
| 330 | :info:build else true; fi |
|---|
| 331 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 332 | :info:build ../.././gcc/libgcc_s_ppc64.1.dylib |
|---|
| 333 | :info:build if [ -f ../.././gcc/libgcc_s_x86_64.1.dylib ]; then \ |
|---|
| 334 | :info:build rm -f ../.././gcc/libgcc_s_x86_64.1.dylib; \ |
|---|
| 335 | :info:build else true; fi |
|---|
| 336 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 337 | :info:build ../.././gcc/libgcc_s_x86_64.1.dylib |
|---|
| 338 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 339 | :info:build /usr/bin/install -c -m 644 libgcc.a ../.././gcc/ |
|---|
| 340 | :info:build chmod 644 ../.././gcc/libgcc.a |
|---|
| 341 | :info:build /usr/bin/ranlib ../.././gcc/libgcc.a |
|---|
| 342 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_trampoline.o) has no symbols |
|---|
| 343 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_ctors.o) has no symbols |
|---|
| 344 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_powitf2.o) has no symbols |
|---|
| 345 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_multc3.o) has no symbols |
|---|
| 346 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_divtc3.o) has no symbols |
|---|
| 347 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 348 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 349 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatditf.o) has no symbols |
|---|
| 350 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 351 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 352 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 353 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floattitf.o) has no symbols |
|---|
| 354 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 355 | :info:build /usr/bin/install -c -m 644 libgcov.a ../.././gcc/ |
|---|
| 356 | :info:build chmod 644 ../.././gcc/libgcov.a |
|---|
| 357 | :info:build /usr/bin/ranlib ../.././gcc/libgcov.a |
|---|
| 358 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 359 | :info:build for file in $parts; do \ |
|---|
| 360 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 361 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 362 | :info:build done |
|---|
| 363 | :info:build Checking multilib configuration for libgomp... |
|---|
| 364 | :info:build /usr/bin/make all-recursive |
|---|
| 365 | :info:build Making all in testsuite |
|---|
| 366 | :info:build make[5]: Nothing to be done for `all'. |
|---|
| 367 | :info:build /usr/bin/make DO=all multi-do # /usr/bin/make |
|---|
| 368 | :info:build if [ -z "i386" ]; then \ |
|---|
| 369 | :info:build true; \ |
|---|
| 370 | :info:build else \ |
|---|
| 371 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 372 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgomp; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 373 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 374 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 375 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 376 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 377 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 378 | :info:build true; \ |
|---|
| 379 | :info:build else \ |
|---|
| 380 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 381 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 382 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make \ |
|---|
| 383 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 384 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 385 | :info:build FCFLAGS="-Wall ${flags}" \ |
|---|
| 386 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 387 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 388 | :info:build prefix="/opt/local" \ |
|---|
| 389 | :info:build exec_prefix="/opt/local" \ |
|---|
| 390 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 391 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 392 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 393 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 394 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 395 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 396 | :info:build DESTDIR="" \ |
|---|
| 397 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 398 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 399 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 400 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 401 | :info:build all); then \ |
|---|
| 402 | :info:build true; \ |
|---|
| 403 | :info:build else \ |
|---|
| 404 | :info:build exit 1; \ |
|---|
| 405 | :info:build fi; \ |
|---|
| 406 | :info:build else true; \ |
|---|
| 407 | :info:build fi; \ |
|---|
| 408 | :info:build fi; \ |
|---|
| 409 | :info:build done; \ |
|---|
| 410 | :info:build fi |
|---|
| 411 | :info:build /usr/bin/make all-recursive |
|---|
| 412 | :info:build Making all in testsuite |
|---|
| 413 | :info:build make[9]: Nothing to be done for `all'. |
|---|
| 414 | :info:build true DO=all multi-do # /usr/bin/make |
|---|
| 415 | :info:build rm -f stage_current |
|---|
| 416 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 417 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 418 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 419 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 420 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 421 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 422 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 423 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 424 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 425 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 426 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 427 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 428 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 429 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 430 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `crt3.o' |
|---|
| 431 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `crt3.o' |
|---|
| 432 | :info:build Checking multilib configuration for libgcc... |
|---|
| 433 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 434 | :info:build # multilibs. |
|---|
| 435 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 436 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 437 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 438 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 439 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 440 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 441 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 442 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 443 | :info:build # number will be embedded in debug information. |
|---|
| 444 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 445 | :info:build && cd ../.././gcc \ |
|---|
| 446 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 447 | :info:build MULTILIB_CFLAGS="-g -O2" \ |
|---|
| 448 | :info:build T=$T \ |
|---|
| 449 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 450 | :info:build T_TARGET |
|---|
| 451 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 452 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 453 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 454 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 455 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 456 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 457 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 458 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 459 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 460 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 461 | :info:build if [ -z "i386" ]; then \ |
|---|
| 462 | :info:build true; \ |
|---|
| 463 | :info:build else \ |
|---|
| 464 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 465 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgcc; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 466 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 467 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 468 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 469 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 470 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 471 | :info:build true; \ |
|---|
| 472 | :info:build else \ |
|---|
| 473 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 474 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 475 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make "AR=/usr/bin/ar" "AR_FLAGS=rc" "CC=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " "CFLAGS=-g -O2" "DESTDIR=" "EXTRA_OFILES=" "HDEFINES=" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "LDFLAGS=" "LOADLIBES=" "RANLIB=/usr/bin/ranlib" "SHELL=/bin/sh" "prefix=/opt/local" "exec_prefix=/opt/local" "libdir=/opt/local/lib/gcc45" "libsubdir=/opt/local/lib/gcc45/gcc/x86_64-apple-darwin10/4.5.0" "tooldir=/opt/local/x86_64-apple-darwin10" \ |
|---|
| 476 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 477 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 478 | :info:build FCFLAGS=" ${flags}" \ |
|---|
| 479 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 480 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 481 | :info:build prefix="/opt/local" \ |
|---|
| 482 | :info:build exec_prefix="/opt/local" \ |
|---|
| 483 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 484 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 485 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 486 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 487 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 488 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 489 | :info:build DESTDIR="" \ |
|---|
| 490 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 491 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 492 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 493 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 494 | :info:build all); then \ |
|---|
| 495 | :info:build true; \ |
|---|
| 496 | :info:build else \ |
|---|
| 497 | :info:build exit 1; \ |
|---|
| 498 | :info:build fi; \ |
|---|
| 499 | :info:build else true; \ |
|---|
| 500 | :info:build fi; \ |
|---|
| 501 | :info:build fi; \ |
|---|
| 502 | :info:build done; \ |
|---|
| 503 | :info:build fi |
|---|
| 504 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 505 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 506 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 507 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 508 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 509 | :info:build for file in $parts; do \ |
|---|
| 510 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 511 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 512 | :info:build done |
|---|
| 513 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 514 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 515 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 516 | :info:build # more uses than just a directory name. |
|---|
| 517 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs . |
|---|
| 518 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o ./libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o fixtfti_s.o fixunstfti_s.o floattitf_s.o floatuntitf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 519 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 520 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 521 | :info:build for file in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib; do \ |
|---|
| 522 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 523 | :info:build ln -s ../$file ../../.././gcc/i386/; \ |
|---|
| 524 | :info:build done |
|---|
| 525 | :info:build # multilibs. |
|---|
| 526 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 527 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 528 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 529 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 530 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 531 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 532 | :info:build rm -f ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 533 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 534 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 535 | :info:build ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 536 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 537 | :info:build rm -f ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 538 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 539 | :info:build ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 540 | :info:build # number will be embedded in debug information. |
|---|
| 541 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 542 | :info:build && cd ../../.././gcc \ |
|---|
| 543 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 544 | :info:build MULTILIB_CFLAGS="-g -O2 -m32" \ |
|---|
| 545 | :info:build T=$T \ |
|---|
| 546 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 547 | :info:build T_TARGET |
|---|
| 548 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 549 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 550 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 551 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 552 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 553 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 554 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 555 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 556 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 557 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 558 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 559 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 560 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 561 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 562 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 563 | :info:build for file in $parts; do \ |
|---|
| 564 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 565 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 566 | :info:build done |
|---|
| 567 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 568 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 569 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 570 | :info:build # more uses than just a directory name. |
|---|
| 571 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs i386 |
|---|
| 572 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o i386/libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -m32 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o tf-signs_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 573 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 574 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 575 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 576 | :info:build # of the build tree, for now. |
|---|
| 577 | :info:build /usr/bin/make install-leaf DESTDIR=../../.././gcc \ |
|---|
| 578 | :info:build slibdir= libsubdir= MULTIOSDIR=i386 |
|---|
| 579 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 580 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../../.././gcc/i386/ |
|---|
| 581 | :info:build chmod 644 ../../.././gcc/i386/libgcc_eh.a |
|---|
| 582 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc_eh.a |
|---|
| 583 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 584 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 585 | :info:build /usr/bin/install -c -m 644 libgcc.a ../../.././gcc/i386/ |
|---|
| 586 | :info:build chmod 644 ../../.././gcc/i386/libgcc.a |
|---|
| 587 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc.a |
|---|
| 588 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_trampoline.o) has no symbols |
|---|
| 589 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_ctors.o) has no symbols |
|---|
| 590 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_powitf2.o) has no symbols |
|---|
| 591 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_multc3.o) has no symbols |
|---|
| 592 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_divtc3.o) has no symbols |
|---|
| 593 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 594 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 595 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatditf.o) has no symbols |
|---|
| 596 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 597 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixsfti.o) has no symbols |
|---|
| 598 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixdfti.o) has no symbols |
|---|
| 599 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixxfti.o) has no symbols |
|---|
| 600 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 601 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunssfti.o) has no symbols |
|---|
| 602 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsdfti.o) has no symbols |
|---|
| 603 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsxfti.o) has no symbols |
|---|
| 604 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 605 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattisf.o) has no symbols |
|---|
| 606 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattidf.o) has no symbols |
|---|
| 607 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattixf.o) has no symbols |
|---|
| 608 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattitf.o) has no symbols |
|---|
| 609 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntisf.o) has no symbols |
|---|
| 610 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntidf.o) has no symbols |
|---|
| 611 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntixf.o) has no symbols |
|---|
| 612 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 613 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(darwin-64.o) has no symbols |
|---|
| 614 | :info:build /usr/bin/install -c -m 644 libgcov.a ../../.././gcc/i386/ |
|---|
| 615 | :info:build chmod 644 ../../.././gcc/i386/libgcov.a |
|---|
| 616 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcov.a |
|---|
| 617 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 618 | :info:build for file in $parts; do \ |
|---|
| 619 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 620 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 621 | :info:build done |
|---|
| 622 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 623 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 624 | :info:build cp ../${mlib}/libgcc/${mlib}/libgcc_s.dylib \ |
|---|
| 625 | :info:build ./libgcc_s.1.dylib_T_${mlib} || exit 1 ; \ |
|---|
| 626 | :info:build done |
|---|
| 627 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 628 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 629 | :info:build /usr/bin/strip -o libgcc_ext.10.4.dylib_T${mlib} \ |
|---|
| 630 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.4.ver -c -urx \ |
|---|
| 631 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 632 | :info:build done |
|---|
| 633 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 634 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 635 | :info:build /usr/bin/strip -o libgcc_ext.10.5.dylib_T${mlib} \ |
|---|
| 636 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.5.ver -c -urx \ |
|---|
| 637 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 638 | :info:build done |
|---|
| 639 | :info:build lipo -output libgcc_s.1.dylib \ |
|---|
| 640 | :info:build -create libgcc_s.1.dylib_T* |
|---|
| 641 | :info:build lipo -output libgcc_ext.10.4.dylib -create libgcc_ext.10.4.dylib_T* |
|---|
| 642 | :info:build lipo -output libgcc_ext.10.5.dylib -create libgcc_ext.10.5.dylib_T* |
|---|
| 643 | :info:build rm libgcc_s.1.dylib_T* |
|---|
| 644 | :info:build rm libgcc_ext.10.4.dylib_T* |
|---|
| 645 | :info:build rm libgcc_ext.10.5.dylib_T* |
|---|
| 646 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 647 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 648 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 649 | :info:build # of the build tree, for now. |
|---|
| 650 | :info:build /usr/bin/make install-leaf DESTDIR=../.././gcc \ |
|---|
| 651 | :info:build slibdir= libsubdir= MULTIOSDIR=. |
|---|
| 652 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 653 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 654 | :info:build for d in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib ; do \ |
|---|
| 655 | :info:build /usr/bin/install -c -m 644 $d ../.././gcc/$d || exit 1 ; \ |
|---|
| 656 | :info:build done |
|---|
| 657 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../.././gcc/ |
|---|
| 658 | :info:build chmod 644 ../.././gcc/libgcc_eh.a |
|---|
| 659 | :info:build /usr/bin/ranlib ../.././gcc/libgcc_eh.a |
|---|
| 660 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 661 | :info:build if [ -f ../.././gcc/libgcc_s_ppc64.1.dylib ]; then \ |
|---|
| 662 | :info:build rm -f ../.././gcc/libgcc_s_ppc64.1.dylib; \ |
|---|
| 663 | :info:build else true; fi |
|---|
| 664 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 665 | :info:build ../.././gcc/libgcc_s_ppc64.1.dylib |
|---|
| 666 | :info:build if [ -f ../.././gcc/libgcc_s_x86_64.1.dylib ]; then \ |
|---|
| 667 | :info:build rm -f ../.././gcc/libgcc_s_x86_64.1.dylib; \ |
|---|
| 668 | :info:build else true; fi |
|---|
| 669 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 670 | :info:build ../.././gcc/libgcc_s_x86_64.1.dylib |
|---|
| 671 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 672 | :info:build /usr/bin/install -c -m 644 libgcc.a ../.././gcc/ |
|---|
| 673 | :info:build chmod 644 ../.././gcc/libgcc.a |
|---|
| 674 | :info:build /usr/bin/ranlib ../.././gcc/libgcc.a |
|---|
| 675 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_trampoline.o) has no symbols |
|---|
| 676 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_ctors.o) has no symbols |
|---|
| 677 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_powitf2.o) has no symbols |
|---|
| 678 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_multc3.o) has no symbols |
|---|
| 679 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_divtc3.o) has no symbols |
|---|
| 680 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 681 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 682 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatditf.o) has no symbols |
|---|
| 683 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 684 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 685 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 686 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floattitf.o) has no symbols |
|---|
| 687 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 688 | :info:build /usr/bin/install -c -m 644 libgcov.a ../.././gcc/ |
|---|
| 689 | :info:build chmod 644 ../.././gcc/libgcov.a |
|---|
| 690 | :info:build /usr/bin/ranlib ../.././gcc/libgcov.a |
|---|
| 691 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 692 | :info:build for file in $parts; do \ |
|---|
| 693 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 694 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 695 | :info:build done |
|---|
| 696 | :info:build Checking multilib configuration for libgomp... |
|---|
| 697 | :info:build /usr/bin/make all-recursive |
|---|
| 698 | :info:build Making all in testsuite |
|---|
| 699 | :info:build make[5]: Nothing to be done for `all'. |
|---|
| 700 | :info:build /usr/bin/make DO=all multi-do # /usr/bin/make |
|---|
| 701 | :info:build if [ -z "i386" ]; then \ |
|---|
| 702 | :info:build true; \ |
|---|
| 703 | :info:build else \ |
|---|
| 704 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 705 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgomp; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 706 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 707 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 708 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 709 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 710 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 711 | :info:build true; \ |
|---|
| 712 | :info:build else \ |
|---|
| 713 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 714 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 715 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make \ |
|---|
| 716 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 717 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 718 | :info:build FCFLAGS="-g -O2 -Wall ${flags}" \ |
|---|
| 719 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 720 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 721 | :info:build prefix="/opt/local" \ |
|---|
| 722 | :info:build exec_prefix="/opt/local" \ |
|---|
| 723 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 724 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 725 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 726 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 727 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 728 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 729 | :info:build DESTDIR="" \ |
|---|
| 730 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 731 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 732 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 733 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 734 | :info:build all); then \ |
|---|
| 735 | :info:build true; \ |
|---|
| 736 | :info:build else \ |
|---|
| 737 | :info:build exit 1; \ |
|---|
| 738 | :info:build fi; \ |
|---|
| 739 | :info:build else true; \ |
|---|
| 740 | :info:build fi; \ |
|---|
| 741 | :info:build fi; \ |
|---|
| 742 | :info:build done; \ |
|---|
| 743 | :info:build fi |
|---|
| 744 | :info:build /usr/bin/make all-recursive |
|---|
| 745 | :info:build Making all in testsuite |
|---|
| 746 | :info:build make[9]: Nothing to be done for `all'. |
|---|
| 747 | :info:build true DO=all multi-do # /usr/bin/make |
|---|
| 748 | :info:build rm -f stage_current |
|---|
| 749 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 750 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 751 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 752 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 753 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 754 | :info:build make[3]: Nothing to be done for `all'. |
|---|
| 755 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 756 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 757 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 758 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 759 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 760 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 761 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 762 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 763 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `crt3.o' |
|---|
| 764 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `crt3.o' |
|---|
| 765 | :info:build Checking multilib configuration for libgcc... |
|---|
| 766 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 767 | :info:build # multilibs. |
|---|
| 768 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 769 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 770 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 771 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 772 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 773 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 774 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 775 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 776 | :info:build # number will be embedded in debug information. |
|---|
| 777 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 778 | :info:build && cd ../.././gcc \ |
|---|
| 779 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 780 | :info:build MULTILIB_CFLAGS="-g -O2" \ |
|---|
| 781 | :info:build T=$T \ |
|---|
| 782 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 783 | :info:build T_TARGET |
|---|
| 784 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 785 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 786 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 787 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 788 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 789 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 790 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 791 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 792 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 793 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libgcc/crt3.o' |
|---|
| 794 | :info:build if [ -z "i386" ]; then \ |
|---|
| 795 | :info:build true; \ |
|---|
| 796 | :info:build else \ |
|---|
| 797 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 798 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgcc; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 799 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 800 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 801 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 802 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 803 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 804 | :info:build true; \ |
|---|
| 805 | :info:build else \ |
|---|
| 806 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 807 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 808 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make "AR=/usr/bin/ar" "AR_FLAGS=rc" "CC=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " "CFLAGS=-g -O2" "DESTDIR=" "EXTRA_OFILES=" "HDEFINES=" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "LDFLAGS=" "LOADLIBES=" "RANLIB=/usr/bin/ranlib" "SHELL=/bin/sh" "prefix=/opt/local" "exec_prefix=/opt/local" "libdir=/opt/local/lib/gcc45" "libsubdir=/opt/local/lib/gcc45/gcc/x86_64-apple-darwin10/4.5.0" "tooldir=/opt/local/x86_64-apple-darwin10" \ |
|---|
| 809 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 810 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 811 | :info:build FCFLAGS=" ${flags}" \ |
|---|
| 812 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 813 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 814 | :info:build prefix="/opt/local" \ |
|---|
| 815 | :info:build exec_prefix="/opt/local" \ |
|---|
| 816 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 817 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 818 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 819 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 820 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 821 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 822 | :info:build DESTDIR="" \ |
|---|
| 823 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 824 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 825 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 826 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 827 | :info:build all); then \ |
|---|
| 828 | :info:build true; \ |
|---|
| 829 | :info:build else \ |
|---|
| 830 | :info:build exit 1; \ |
|---|
| 831 | :info:build fi; \ |
|---|
| 832 | :info:build else true; \ |
|---|
| 833 | :info:build fi; \ |
|---|
| 834 | :info:build fi; \ |
|---|
| 835 | :info:build done; \ |
|---|
| 836 | :info:build fi |
|---|
| 837 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 838 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 839 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 840 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 841 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 842 | :info:build for file in $parts; do \ |
|---|
| 843 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 844 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 845 | :info:build done |
|---|
| 846 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 847 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 848 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 849 | :info:build # more uses than just a directory name. |
|---|
| 850 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs . |
|---|
| 851 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o ./libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o fixtfti_s.o fixunstfti_s.o floattitf_s.o floatuntitf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 852 | :info:build # If this is the top-level multilib, build all the other |
|---|
| 853 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 854 | :info:build for file in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib; do \ |
|---|
| 855 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 856 | :info:build ln -s ../$file ../../.././gcc/i386/; \ |
|---|
| 857 | :info:build done |
|---|
| 858 | :info:build # multilibs. |
|---|
| 859 | :info:build # Recursively invoke make in the GCC directory to build any |
|---|
| 860 | :info:build # startfiles (for now). We must do this just once, passing |
|---|
| 861 | :info:build # it all the GCC_EXTRA_PARTS as simultaneous goal targets, |
|---|
| 862 | :info:build # so that rules which cannot execute simultaneously are properly |
|---|
| 863 | :info:build # serialized. We indirect through T_TARGET in case any multilib |
|---|
| 864 | :info:build # directories contain an equals sign, to prevent make from |
|---|
| 865 | :info:build # interpreting any of the goals as variable assignments. |
|---|
| 866 | :info:build rm -f ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 867 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 868 | :info:build ../../.././gcc/i386/libgcc_s_x86_64.1.dylib |
|---|
| 869 | :info:build # We must use cd && make rather than make -C, or else the stage |
|---|
| 870 | :info:build rm -f ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 871 | :info:build # number will be embedded in debug information. |
|---|
| 872 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 873 | :info:build ../../.././gcc/i386/libgcc_s_ppc64.1.dylib |
|---|
| 874 | :info:build T=`${PWDCMD-pwd}`/ \ |
|---|
| 875 | :info:build && cd ../../.././gcc \ |
|---|
| 876 | :info:build && /usr/bin/make GCC_FOR_TARGET="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include " \ |
|---|
| 877 | :info:build MULTILIB_CFLAGS="-g -O2 -m32" \ |
|---|
| 878 | :info:build T=$T \ |
|---|
| 879 | :info:build T_TARGET="${T}crt3.o ${T}crtfastmath.o ${T}crtprec32.o ${T}crtprec64.o ${T}crtprec80.o" \ |
|---|
| 880 | :info:build T_TARGET |
|---|
| 881 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: overriding commands for target `darwin.o' |
|---|
| 882 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:25: warning: ignoring old commands for target `darwin.o' |
|---|
| 883 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: overriding commands for target `darwin-c.o' |
|---|
| 884 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:31: warning: ignoring old commands for target `darwin-c.o' |
|---|
| 885 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: overriding commands for target `darwin-f.o' |
|---|
| 886 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:35: warning: ignoring old commands for target `darwin-f.o' |
|---|
| 887 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: overriding commands for target `darwin-driver.o' |
|---|
| 888 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:40: warning: ignoring old commands for target `darwin-driver.o' |
|---|
| 889 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: overriding commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 890 | :info:build ../../gcc-4.5.0/gcc/config/t-darwin:48: warning: ignoring old commands for target `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/i386/libgcc/crt3.o' |
|---|
| 891 | :info:build # Early copyback; see "all" above for the rationale. The |
|---|
| 892 | :info:build # early copy is necessary so that the gcc -B options find |
|---|
| 893 | :info:build # the right startup files when linking shared libgcc. |
|---|
| 894 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 895 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 896 | :info:build for file in $parts; do \ |
|---|
| 897 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 898 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 899 | :info:build done |
|---|
| 900 | :info:build # @multilib_flags@ is still needed because this may use |
|---|
| 901 | :info:build # /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include and -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED directly. |
|---|
| 902 | :info:build # @multilib_dir@ is not really necessary, but sometimes it has |
|---|
| 903 | :info:build # more uses than just a directory name. |
|---|
| 904 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs i386 |
|---|
| 905 | :info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -pipe -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -dynamiclib -nodefaultlibs -install_name /opt/local/lib/gcc45/libgcc_s.1.dylib -single_module -o i386/libgcc_s.dylib -Wl,-exported_symbols_list,libgcc.map -compatibility_version 1 -current_version 1.0 -g -O2 -m32 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _enable_execute_stack_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _multc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _floatunditf_s.o _fixsfti_s.o _fixdfti_s.o _fixxfti_s.o _fixtfti_s.o _fixunssfti_s.o _fixunsdfti_s.o _fixunsxfti_s.o _fixunstfti_s.o _floattisf_s.o _floattidf_s.o _floattixf_s.o _floattitf_s.o _floatuntisf_s.o _floatuntidf_s.o _floatuntixf_s.o _floatuntitf_s.o _divdi3_s.o _moddi3_s.o _udivdi3_s.o _umoddi3_s.o _udiv_w_sdiv_s.o _udivmoddi4_s.o darwin-64_s.o addtf3_s.o divtf3_s.o eqtf2_s.o getf2_s.o letf2_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o tf-signs_s.o unwind-dw2_s.o unwind-dw2-fde-darwin_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o -lc |
|---|
| 906 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 907 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 908 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 909 | :info:build # of the build tree, for now. |
|---|
| 910 | :info:build /usr/bin/make install-leaf DESTDIR=../../.././gcc \ |
|---|
| 911 | :info:build slibdir= libsubdir= MULTIOSDIR=i386 |
|---|
| 912 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 913 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../../.././gcc/i386/ |
|---|
| 914 | :info:build chmod 644 ../../.././gcc/i386/libgcc_eh.a |
|---|
| 915 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc_eh.a |
|---|
| 916 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 917 | :info:build /bin/sh ../../../../gcc-4.5.0/libgcc/../mkinstalldirs ../../.././gcc/i386 |
|---|
| 918 | :info:build /usr/bin/install -c -m 644 libgcc.a ../../.././gcc/i386/ |
|---|
| 919 | :info:build chmod 644 ../../.././gcc/i386/libgcc.a |
|---|
| 920 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcc.a |
|---|
| 921 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_trampoline.o) has no symbols |
|---|
| 922 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_ctors.o) has no symbols |
|---|
| 923 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_powitf2.o) has no symbols |
|---|
| 924 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_multc3.o) has no symbols |
|---|
| 925 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_divtc3.o) has no symbols |
|---|
| 926 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 927 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 928 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatditf.o) has no symbols |
|---|
| 929 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 930 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixsfti.o) has no symbols |
|---|
| 931 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixdfti.o) has no symbols |
|---|
| 932 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixxfti.o) has no symbols |
|---|
| 933 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 934 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunssfti.o) has no symbols |
|---|
| 935 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsdfti.o) has no symbols |
|---|
| 936 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunsxfti.o) has no symbols |
|---|
| 937 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 938 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattisf.o) has no symbols |
|---|
| 939 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattidf.o) has no symbols |
|---|
| 940 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattixf.o) has no symbols |
|---|
| 941 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floattitf.o) has no symbols |
|---|
| 942 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntisf.o) has no symbols |
|---|
| 943 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntidf.o) has no symbols |
|---|
| 944 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntixf.o) has no symbols |
|---|
| 945 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 946 | :info:build /usr/bin/ranlib: file: ../../.././gcc/i386/libgcc.a(darwin-64.o) has no symbols |
|---|
| 947 | :info:build /usr/bin/install -c -m 644 libgcov.a ../../.././gcc/i386/ |
|---|
| 948 | :info:build chmod 644 ../../.././gcc/i386/libgcov.a |
|---|
| 949 | :info:build /usr/bin/ranlib ../../.././gcc/i386/libgcov.a |
|---|
| 950 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 951 | :info:build for file in $parts; do \ |
|---|
| 952 | :info:build rm -f ../../.././gcc/i386/$file; \ |
|---|
| 953 | :info:build /usr/bin/install -c -m 644 $file ../../.././gcc/i386/; \ |
|---|
| 954 | :info:build done |
|---|
| 955 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 956 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 957 | :info:build cp ../${mlib}/libgcc/${mlib}/libgcc_s.dylib \ |
|---|
| 958 | :info:build ./libgcc_s.1.dylib_T_${mlib} || exit 1 ; \ |
|---|
| 959 | :info:build done |
|---|
| 960 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 961 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 962 | :info:build /usr/bin/strip -o libgcc_ext.10.4.dylib_T${mlib} \ |
|---|
| 963 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.4.ver -c -urx \ |
|---|
| 964 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 965 | :info:build done |
|---|
| 966 | :info:build MLIBS=`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include --print-multi-lib | sed -e 's/;.*$//'` ; \ |
|---|
| 967 | :info:build for mlib in $MLIBS ; do \ |
|---|
| 968 | :info:build /usr/bin/strip -o libgcc_ext.10.5.dylib_T${mlib} \ |
|---|
| 969 | :info:build -R ../../../gcc-4.5.0/libgcc/../gcc/config/i386/darwin-libgcc.10.5.ver -c -urx \ |
|---|
| 970 | :info:build ../${mlib}/libgcc/${mlib}/libgcc_s.dylib || exit 1 ; \ |
|---|
| 971 | :info:build done |
|---|
| 972 | :info:build lipo -output libgcc_s.1.dylib \ |
|---|
| 973 | :info:build -create libgcc_s.1.dylib_T* |
|---|
| 974 | :info:build lipo -output libgcc_ext.10.5.dylib -create libgcc_ext.10.5.dylib_T* |
|---|
| 975 | :info:build lipo -output libgcc_ext.10.4.dylib -create libgcc_ext.10.4.dylib_T* |
|---|
| 976 | :info:build rm libgcc_s.1.dylib_T* |
|---|
| 977 | :info:build rm libgcc_ext.10.4.dylib_T* |
|---|
| 978 | :info:build rm libgcc_ext.10.5.dylib_T* |
|---|
| 979 | :info:build # Now that we have built all the objects, we need to copy |
|---|
| 980 | :info:build # them back to the GCC directory. Too many things (other |
|---|
| 981 | :info:build # in-tree libraries, and DejaGNU) know about the layout |
|---|
| 982 | :info:build # of the build tree, for now. |
|---|
| 983 | :info:build /usr/bin/make install-leaf DESTDIR=../.././gcc \ |
|---|
| 984 | :info:build slibdir= libsubdir= MULTIOSDIR=. |
|---|
| 985 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 986 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 987 | :info:build for d in libgcc_s.1.dylib libgcc_ext.10.4.dylib libgcc_ext.10.5.dylib ; do \ |
|---|
| 988 | :info:build /usr/bin/install -c -m 644 $d ../.././gcc/$d || exit 1 ; \ |
|---|
| 989 | :info:build done |
|---|
| 990 | :info:build /usr/bin/install -c -m 644 libgcc_eh.a ../.././gcc/ |
|---|
| 991 | :info:build chmod 644 ../.././gcc/libgcc_eh.a |
|---|
| 992 | :info:build /usr/bin/ranlib ../.././gcc/libgcc_eh.a |
|---|
| 993 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc_eh.a(unwind-sjlj.o) has no symbols |
|---|
| 994 | :info:build if [ -f ../.././gcc/libgcc_s_ppc64.1.dylib ]; then \ |
|---|
| 995 | :info:build rm -f ../.././gcc/libgcc_s_ppc64.1.dylib; \ |
|---|
| 996 | :info:build else true; fi |
|---|
| 997 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 998 | :info:build ../.././gcc/libgcc_s_ppc64.1.dylib |
|---|
| 999 | :info:build if [ -f ../.././gcc/libgcc_s_x86_64.1.dylib ]; then \ |
|---|
| 1000 | :info:build rm -f ../.././gcc/libgcc_s_x86_64.1.dylib; \ |
|---|
| 1001 | :info:build else true; fi |
|---|
| 1002 | :info:build ln -s libgcc_s.1.dylib \ |
|---|
| 1003 | :info:build ../.././gcc/libgcc_s_x86_64.1.dylib |
|---|
| 1004 | :info:build /bin/sh ../../../gcc-4.5.0/libgcc/../mkinstalldirs ../.././gcc |
|---|
| 1005 | :info:build /usr/bin/install -c -m 644 libgcc.a ../.././gcc/ |
|---|
| 1006 | :info:build chmod 644 ../.././gcc/libgcc.a |
|---|
| 1007 | :info:build /usr/bin/ranlib ../.././gcc/libgcc.a |
|---|
| 1008 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_trampoline.o) has no symbols |
|---|
| 1009 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_ctors.o) has no symbols |
|---|
| 1010 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_powitf2.o) has no symbols |
|---|
| 1011 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_multc3.o) has no symbols |
|---|
| 1012 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_divtc3.o) has no symbols |
|---|
| 1013 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfdi.o) has no symbols |
|---|
| 1014 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfdi.o) has no symbols |
|---|
| 1015 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatditf.o) has no symbols |
|---|
| 1016 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatunditf.o) has no symbols |
|---|
| 1017 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixtfti.o) has no symbols |
|---|
| 1018 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_fixunstfti.o) has no symbols |
|---|
| 1019 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floattitf.o) has no symbols |
|---|
| 1020 | :info:build /usr/bin/ranlib: file: ../.././gcc/libgcc.a(_floatuntitf.o) has no symbols |
|---|
| 1021 | :info:build /usr/bin/install -c -m 644 libgcov.a ../.././gcc/ |
|---|
| 1022 | :info:build chmod 644 ../.././gcc/libgcov.a |
|---|
| 1023 | :info:build /usr/bin/ranlib ../.././gcc/libgcov.a |
|---|
| 1024 | :info:build parts="crt3.o crtfastmath.o crtprec32.o crtprec64.o crtprec80.o"; \ |
|---|
| 1025 | :info:build for file in $parts; do \ |
|---|
| 1026 | :info:build rm -f ../.././gcc/$file; \ |
|---|
| 1027 | :info:build /usr/bin/install -c -m 644 $file ../.././gcc/; \ |
|---|
| 1028 | :info:build done |
|---|
| 1029 | :info:build Checking multilib configuration for libgomp... |
|---|
| 1030 | :info:build /usr/bin/make all-recursive |
|---|
| 1031 | :info:build Making all in testsuite |
|---|
| 1032 | :info:build make[5]: Nothing to be done for `all'. |
|---|
| 1033 | :info:build /usr/bin/make DO=all multi-do # /usr/bin/make |
|---|
| 1034 | :info:build if [ -z "i386" ]; then \ |
|---|
| 1035 | :info:build true; \ |
|---|
| 1036 | :info:build else \ |
|---|
| 1037 | :info:build rootpre=`${PWDCMD-pwd}`/; export rootpre; \ |
|---|
| 1038 | :info:build srcrootpre=`cd ../../../gcc-4.5.0/libgomp; ${PWDCMD-pwd}`/; export srcrootpre; \ |
|---|
| 1039 | :info:build lib=`echo "${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \ |
|---|
| 1040 | :info:build compiler="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include "; \ |
|---|
| 1041 | :info:build for i in `${compiler} --print-multi-lib 2>/dev/null`; do \ |
|---|
| 1042 | :info:build dir=`echo $i | sed -e 's/;.*$//'`; \ |
|---|
| 1043 | :info:build if [ "${dir}" = "." ]; then \ |
|---|
| 1044 | :info:build true; \ |
|---|
| 1045 | :info:build else \ |
|---|
| 1046 | :info:build if [ -d ../${dir}/${lib} ]; then \ |
|---|
| 1047 | :info:build flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
|---|
| 1048 | :info:build if (cd ../${dir}/${lib}; /usr/bin/make \ |
|---|
| 1049 | :info:build CFLAGS="-g -O2 ${flags}" \ |
|---|
| 1050 | :info:build CCASFLAGS=" ${flags}" \ |
|---|
| 1051 | :info:build FCFLAGS="-g -O2 -Wall ${flags}" \ |
|---|
| 1052 | :info:build FFLAGS=" ${flags}" \ |
|---|
| 1053 | :info:build ADAFLAGS=" ${flags}" \ |
|---|
| 1054 | :info:build prefix="/opt/local" \ |
|---|
| 1055 | :info:build exec_prefix="/opt/local" \ |
|---|
| 1056 | :info:build GCJFLAGS=" ${flags}" \ |
|---|
| 1057 | :info:build CXXFLAGS="-g -O2 ${flags}" \ |
|---|
| 1058 | :info:build LIBCFLAGS="-g -O2 ${flags}" \ |
|---|
| 1059 | :info:build LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \ |
|---|
| 1060 | :info:build LDFLAGS=" ${flags}" \ |
|---|
| 1061 | :info:build MULTIFLAGS="${flags}" \ |
|---|
| 1062 | :info:build DESTDIR="" \ |
|---|
| 1063 | :info:build INSTALL="/usr/bin/install -c" \ |
|---|
| 1064 | :info:build INSTALL_DATA="/usr/bin/install -c -m 644" \ |
|---|
| 1065 | :info:build INSTALL_PROGRAM="/usr/bin/install -c" \ |
|---|
| 1066 | :info:build INSTALL_SCRIPT="/usr/bin/install -c" \ |
|---|
| 1067 | :info:build all); then \ |
|---|
| 1068 | :info:build true; \ |
|---|
| 1069 | :info:build else \ |
|---|
| 1070 | :info:build exit 1; \ |
|---|
| 1071 | :info:build fi; \ |
|---|
| 1072 | :info:build else true; \ |
|---|
| 1073 | :info:build fi; \ |
|---|
| 1074 | :info:build fi; \ |
|---|
| 1075 | :info:build done; \ |
|---|
| 1076 | :info:build fi |
|---|
| 1077 | :info:build /usr/bin/make all-recursive |
|---|
| 1078 | :info:build Making all in testsuite |
|---|
| 1079 | :info:build make[9]: Nothing to be done for `all'. |
|---|
| 1080 | :info:build true DO=all multi-do # /usr/bin/make |
|---|
| 1081 | :info:build /usr/bin/make "DESTDIR=" "RPATH_ENVVAR=DYLD_LIBRARY_PATH" "TARGET_SUBDIR=x86_64-apple-darwin10" "bindir=/opt/local/bin" "datadir=/opt/local/share/gcc-4.5" "exec_prefix=/opt/local" "includedir=/opt/local/include/gcc45" "datarootdir=/opt/local/share/gcc-4.5" "docdir=/opt/local/share/gcc-4.5/doc/" "infodir=/opt/local/share/info" "pdfdir=/opt/local/share/gcc-4.5/doc/" "htmldir=/opt/local/share/gcc-4.5/doc/" "libdir=/opt/local/lib/gcc45" "libexecdir=/opt/local/libexec" "lispdir=" "localstatedir=/opt/local/var" "mandir=/opt/local/share/man" "oldincludedir=/usr/include" "prefix=/opt/local" "sbindir=/opt/local/sbin" "sharedstatedir=/opt/local/com" "sysconfdir=/opt/local/etc" "tooldir=/opt/local/x86_64-apple-darwin10" "build_tooldir=/opt/local/x86_64-apple-darwin10" "target_alias=x86_64-apple-darwin10" "AWK=awk" "BISON=bison" "CC_FOR_BUILD=/usr/bin/gcc-4.2" "CFLAGS_FOR_BUILD=-O2" "CXX_FOR_BUILD=/usr/bin/g++-4.2" "EXPECT=expect" "FLEX=flex" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "INSTALL_SCRIPT=/usr/bin/install -c" "LDFLAGS_FOR_BUILD=-L/opt/local/lib" "LEX=flex" "M4=gm4" "MAKE=/usr/bin/make" "RUNTEST=runtest" "RUNTESTFLAGS=" "SED=/usr/bin/sed" "SHELL=/bin/sh" "YACC=bison -y" "`echo 'ADAFLAGS=' | sed -e s'/[^=][^=]*=$/XFOO=/'`" "ADA_CFLAGS=" "AR_FLAGS=rc" "`echo 'BOOT_ADAFLAGS=-gnatpg -gnata' | sed -e s'/[^=][^=]*=$/XFOO=/'`" "BOOT_CFLAGS=-g -O2" "BOOT_LDFLAGS=" "CFLAGS=-O2" "CXXFLAGS=-O2" "LDFLAGS=-L/opt/local/lib" "LIBCFLAGS=-O2" "LIBCXXFLAGS=-O2 -fno-implicit-templates" "STAGE1_CHECKING=--enable-checking=yes" "STAGE1_LANGUAGES=c" "GNATBIND=no" "GNATMAKE=no" "AR_FOR_TARGET=/usr/bin/ar" "AS_FOR_TARGET=/usr/bin/as" "CC_FOR_TARGET=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/" "CFLAGS_FOR_TARGET=-g -O2" "CPPFLAGS_FOR_TARGET=" "CXX_FOR_TARGET=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/g++ -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/ -nostdinc++ -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libstdc++-v3/src -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/x86_64-apple-darwin10/libstdc++-v3/src/.libs" "CXXFLAGS_FOR_TARGET=-g -O2" "DLLTOOL_FOR_TARGET=dlltool" "FLAGS_FOR_TARGET=-B/opt/local/x86_64-apple-darwin10/bin/ -B/opt/local/x86_64-apple-darwin10/lib/ -isystem /opt/local/x86_64-apple-darwin10/include -isystem /opt/local/x86_64-apple-darwin10/sys-include" "GCJ_FOR_TARGET=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/gcj -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/" "GFORTRAN_FOR_TARGET=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/gfortran -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build/./gcc/" "LD_FOR_TARGET=/usr/bin/ld" "LIPO_FOR_TARGET=lipo" "LDFLAGS_FOR_TARGET=" "LIBCFLAGS_FOR_TARGET=-g -O2" "LIBCXXFLAGS_FOR_TARGET=-g -O2 -fno-implicit-templates" "NM_FOR_TARGET=/usr/bin/nm" "OBJDUMP_FOR_TARGET=/usr/bin/objdump" "RANLIB_FOR_TARGET=/usr/bin/ranlib" "STRIP_FOR_TARGET=/usr/bin/strip" "WINDRES_FOR_TARGET=windres" "WINDMC_FOR_TARGET=windmc" "BUILD_CONFIG=bootstrap-debug" "`echo 'LANGUAGES=' | sed -e s'/[^=][^=]*=$/XFOO=/'`" "LEAN=false" "STAGE1_CFLAGS=-g -fkeep-inline-functions" "STAGE1_CXXFLAGS=-O2" "STAGE1_TFLAGS=" "STAGE2_CFLAGS=-g -O2 -gtoggle" "STAGE2_CXXFLAGS=-O2" "STAGE2_TFLAGS=" "STAGE3_CFLAGS=-g -O2" "STAGE3_CXXFLAGS=-O2" "STAGE3_TFLAGS=" "STAGE4_CFLAGS=-g -O2" "STAGE4_CXXFLAGS=-O2" "STAGE4_TFLAGS=" "STAGEprofile_CFLAGS=-g -O2 -gtoggle -fprofile-generate" "STAGEprofile_CXXFLAGS=-O2" "STAGEprofile_TFLAGS=" "STAGEfeedback_CFLAGS=-g -O2 -fprofile-use" "STAGEfeedback_CXXFLAGS=-O2" "STAGEfeedback_TFLAGS=" "TFLAGS=" "CONFIG_SHELL=/bin/sh" "MAKEINFO=makeinfo --split-size=5000000 --split-size=5000000" compare |
|---|
| 1082 | :info:build rm -f stage_current |
|---|
| 1083 | :info:build Comparing stages 2 and 3 |
|---|
| 1084 | :info:build warning: gcc/cc1-checksum.o differs |
|---|
| 1085 | :info:build warning: gcc/cc1obj-checksum.o differs |
|---|
| 1086 | :info:build warning: gcc/cc1objplus-checksum.o differs |
|---|
| 1087 | :info:build warning: gcc/cc1plus-checksum.o differs |
|---|
| 1088 | :info:build Bootstrap comparison failure! |
|---|
| 1089 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/bar.o differs |
|---|
| 1090 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/barrier.o differs |
|---|
| 1091 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/env.o differs |
|---|
| 1092 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/iter.o differs |
|---|
| 1093 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/iter_ull.o differs |
|---|
| 1094 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/lock.o differs |
|---|
| 1095 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/loop.o differs |
|---|
| 1096 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/loop_ull.o differs |
|---|
| 1097 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/ordered.o differs |
|---|
| 1098 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/parallel.o differs |
|---|
| 1099 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/proc.o differs |
|---|
| 1100 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/sections.o differs |
|---|
| 1101 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/single.o differs |
|---|
| 1102 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/task.o differs |
|---|
| 1103 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/team.o differs |
|---|
| 1104 | :info:build x86_64-apple-darwin10/i386/libgomp/.libs/work.o differs |
|---|
| 1105 | :info:build x86_64-apple-darwin10/i386/libgomp/bar.o differs |
|---|
| 1106 | :info:build x86_64-apple-darwin10/i386/libgomp/barrier.o differs |
|---|
| 1107 | :info:build x86_64-apple-darwin10/i386/libgomp/env.o differs |
|---|
| 1108 | :info:build x86_64-apple-darwin10/i386/libgomp/iter.o differs |
|---|
| 1109 | :info:build x86_64-apple-darwin10/i386/libgomp/iter_ull.o differs |
|---|
| 1110 | :info:build x86_64-apple-darwin10/i386/libgomp/lock.o differs |
|---|
| 1111 | :info:build x86_64-apple-darwin10/i386/libgomp/loop.o differs |
|---|
| 1112 | :info:build x86_64-apple-darwin10/i386/libgomp/loop_ull.o differs |
|---|
| 1113 | :info:build x86_64-apple-darwin10/i386/libgomp/ordered.o differs |
|---|
| 1114 | :info:build x86_64-apple-darwin10/i386/libgomp/parallel.o differs |
|---|
| 1115 | :info:build x86_64-apple-darwin10/i386/libgomp/proc.o differs |
|---|
| 1116 | :info:build x86_64-apple-darwin10/i386/libgomp/sections.o differs |
|---|
| 1117 | :info:build x86_64-apple-darwin10/i386/libgomp/single.o differs |
|---|
| 1118 | :info:build x86_64-apple-darwin10/i386/libgomp/task.o differs |
|---|
| 1119 | :info:build x86_64-apple-darwin10/i386/libgomp/team.o differs |
|---|
| 1120 | :info:build x86_64-apple-darwin10/i386/libgomp/work.o differs |
|---|
| 1121 | :info:build x86_64-apple-darwin10/libgomp/.libs/bar.o differs |
|---|
| 1122 | :info:build x86_64-apple-darwin10/libgomp/.libs/barrier.o differs |
|---|
| 1123 | :info:build x86_64-apple-darwin10/libgomp/.libs/env.o differs |
|---|
| 1124 | :info:build x86_64-apple-darwin10/libgomp/.libs/iter.o differs |
|---|
| 1125 | :info:build x86_64-apple-darwin10/libgomp/.libs/iter_ull.o differs |
|---|
| 1126 | :info:build x86_64-apple-darwin10/libgomp/.libs/lock.o differs |
|---|
| 1127 | :info:build x86_64-apple-darwin10/libgomp/.libs/loop.o differs |
|---|
| 1128 | :info:build x86_64-apple-darwin10/libgomp/.libs/loop_ull.o differs |
|---|
| 1129 | :info:build x86_64-apple-darwin10/libgomp/.libs/ordered.o differs |
|---|
| 1130 | :info:build x86_64-apple-darwin10/libgomp/.libs/parallel.o differs |
|---|
| 1131 | :info:build x86_64-apple-darwin10/libgomp/.libs/proc.o differs |
|---|
| 1132 | :info:build x86_64-apple-darwin10/libgomp/.libs/sections.o differs |
|---|
| 1133 | :info:build x86_64-apple-darwin10/libgomp/.libs/single.o differs |
|---|
| 1134 | :info:build x86_64-apple-darwin10/libgomp/.libs/task.o differs |
|---|
| 1135 | :info:build x86_64-apple-darwin10/libgomp/.libs/team.o differs |
|---|
| 1136 | :info:build x86_64-apple-darwin10/libgomp/.libs/work.o differs |
|---|
| 1137 | :info:build x86_64-apple-darwin10/libgomp/bar.o differs |
|---|
| 1138 | :info:build x86_64-apple-darwin10/libgomp/barrier.o differs |
|---|
| 1139 | :info:build x86_64-apple-darwin10/libgomp/env.o differs |
|---|
| 1140 | :info:build x86_64-apple-darwin10/libgomp/iter.o differs |
|---|
| 1141 | :info:build x86_64-apple-darwin10/libgomp/iter_ull.o differs |
|---|
| 1142 | :info:build x86_64-apple-darwin10/libgomp/lock.o differs |
|---|
| 1143 | :info:build x86_64-apple-darwin10/libgomp/loop.o differs |
|---|
| 1144 | :info:build x86_64-apple-darwin10/libgomp/loop_ull.o differs |
|---|
| 1145 | :info:build x86_64-apple-darwin10/libgomp/ordered.o differs |
|---|
| 1146 | :info:build x86_64-apple-darwin10/libgomp/parallel.o differs |
|---|
| 1147 | :info:build x86_64-apple-darwin10/libgomp/proc.o differs |
|---|
| 1148 | :info:build x86_64-apple-darwin10/libgomp/sections.o differs |
|---|
| 1149 | :info:build x86_64-apple-darwin10/libgomp/single.o differs |
|---|
| 1150 | :info:build x86_64-apple-darwin10/libgomp/task.o differs |
|---|
| 1151 | :info:build x86_64-apple-darwin10/libgomp/team.o differs |
|---|
| 1152 | :info:build x86_64-apple-darwin10/libgomp/work.o differs |
|---|
| 1153 | :info:build make[2]: *** [compare] Error 1 |
|---|
| 1154 | :info:build make[1]: *** [stage3-bubble] Error 2 |
|---|
| 1155 | :info:build make: *** [bootstrap] Error 2 |
|---|
| 1156 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work/build" && /usr/bin/make -j4 bootstrap " returned error 2 |
|---|
| 1157 | :error:build Target org.macports.build returned: shell command failed |
|---|
| 1158 | :debug:build Backtrace: shell command failed |
|---|
| 1159 | while executing |
|---|
| 1160 | "command_exec build" |
|---|
| 1161 | (procedure "portbuild::build_main" line 8) |
|---|
| 1162 | invoked from within |
|---|
| 1163 | "$procedure $targetname" |
|---|
| 1164 | :info:build Warning: the following items did not execute (for gcc45): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 1165 | :notice:build Log for gcc45 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/main.log |
|---|
