| 1 | version:1 |
|---|
| 2 | :debug:clean Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$ |
|---|
| 3 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 4 | :debug:clean perl5.12 5.12.2_0 exists in the ports tree |
|---|
| 5 | :debug:clean perl5.12 5.12.2_0 +universal is the latest installed |
|---|
| 6 | :debug:clean perl5.12 5.12.2_0 +universal is active |
|---|
| 7 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 8 | :debug:clean new fully merged portvariants: universal + |
|---|
| 9 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 |
|---|
| 10 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 11 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 14 | :debug:clean adding the default universal variant |
|---|
| 15 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 16 | :debug:clean Executing variant universal provides universal |
|---|
| 17 | :debug:clean No need to upgrade! perl5.12 5.12.2_0 >= perl5.12 5.12.2_0 |
|---|
| 18 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 19 | :debug:clean apache2 2.2.17_0 exists in the ports tree |
|---|
| 20 | :debug:clean apache2 2.2.17_0 +preforkmpm+universal is the latest installed |
|---|
| 21 | :debug:clean apache2 2.2.17_0 +preforkmpm+universal is active |
|---|
| 22 | :debug:clean Merging existing variants '+preforkmpm+universal' into variants |
|---|
| 23 | :debug:clean new fully merged portvariants: universal + preforkmpm + |
|---|
| 24 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2 |
|---|
| 25 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 26 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 29 | :debug:clean adding the default universal variant |
|---|
| 30 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 31 | :debug:clean Executing variant preforkmpm provides preforkmpm |
|---|
| 32 | :debug:clean Executing variant universal provides universal |
|---|
| 33 | :debug:clean No need to upgrade! apache2 2.2.17_0 >= apache2 2.2.17_0 |
|---|
| 34 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 35 | :debug:clean apr 1.4.2_1 exists in the ports tree |
|---|
| 36 | :debug:clean apr 1.4.2_1 +universal is the latest installed |
|---|
| 37 | :debug:clean apr 1.4.2_1 +universal is active |
|---|
| 38 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 39 | :debug:clean new fully merged portvariants: universal + |
|---|
| 40 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr |
|---|
| 41 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 42 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 44 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 45 | :debug:clean adding the default universal variant |
|---|
| 46 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 47 | :debug:clean Executing variant universal provides universal |
|---|
| 48 | :debug:clean No need to upgrade! apr 1.4.2_1 >= apr 1.4.2_1 |
|---|
| 49 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 50 | :debug:clean apr-util 1.3.9_2 exists in the ports tree |
|---|
| 51 | :debug:clean apr-util 1.3.9_2 +universal is the latest installed |
|---|
| 52 | :debug:clean apr-util 1.3.9_2 +universal is active |
|---|
| 53 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 54 | :debug:clean new fully merged portvariants: universal + |
|---|
| 55 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util |
|---|
| 56 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 57 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 58 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 59 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 60 | :debug:clean adding the default universal variant |
|---|
| 61 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 62 | :debug:clean Executing variant universal provides universal |
|---|
| 63 | :debug:clean No need to upgrade! apr-util 1.3.9_2 >= apr-util 1.3.9_2 |
|---|
| 64 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 65 | :debug:clean expat 2.0.1_1 exists in the ports tree |
|---|
| 66 | :debug:clean expat 2.0.1_1 +universal is the latest installed |
|---|
| 67 | :debug:clean expat 2.0.1_1 +universal is active |
|---|
| 68 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 69 | :debug:clean new fully merged portvariants: universal + |
|---|
| 70 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 71 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 72 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 73 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 74 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:clean adding the default universal variant |
|---|
| 76 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 77 | :debug:clean Executing variant universal provides universal |
|---|
| 78 | :debug:clean No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 79 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 80 | :debug:clean libiconv 1.13.1_0 exists in the ports tree |
|---|
| 81 | :debug:clean libiconv 1.13.1_0 +universal is the latest installed |
|---|
| 82 | :debug:clean libiconv 1.13.1_0 +universal is active |
|---|
| 83 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 84 | :debug:clean new fully merged portvariants: universal + |
|---|
| 85 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 86 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 87 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 88 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 89 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 90 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 91 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 92 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 93 | :debug:clean Executing variant universal provides universal |
|---|
| 94 | :debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 95 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 96 | :debug:clean db46 4.6.21_6 exists in the ports tree |
|---|
| 97 | :debug:clean db46 4.6.21_6 +universal is the latest installed |
|---|
| 98 | :debug:clean db46 4.6.21_6 +universal is active |
|---|
| 99 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 100 | :debug:clean new fully merged portvariants: universal + |
|---|
| 101 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 102 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 103 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 104 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 107 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 108 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 109 | :debug:clean Executing variant universal provides universal |
|---|
| 110 | :debug:clean No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 111 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 112 | :debug:clean sqlite3 3.7.3_0 exists in the ports tree |
|---|
| 113 | :debug:clean sqlite3 3.7.3_0 +universal is the latest installed |
|---|
| 114 | :debug:clean sqlite3 3.7.3_0 +universal is active |
|---|
| 115 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 116 | :debug:clean new fully merged portvariants: universal + |
|---|
| 117 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 118 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 119 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | :debug:clean adding the default universal variant |
|---|
| 123 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 124 | :debug:clean Executing variant universal provides universal |
|---|
| 125 | :debug:clean No need to upgrade! sqlite3 3.7.3_0 >= sqlite3 3.7.3_0 |
|---|
| 126 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 127 | :debug:clean readline 6.1.002_0 exists in the ports tree |
|---|
| 128 | :debug:clean readline 6.1.002_0 +universal is the latest installed |
|---|
| 129 | :debug:clean readline 6.1.002_0 +universal is active |
|---|
| 130 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 131 | :debug:clean new fully merged portvariants: universal + |
|---|
| 132 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 133 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 134 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 135 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 136 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 137 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 138 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 139 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 140 | :debug:clean Executing variant universal provides universal |
|---|
| 141 | :debug:clean No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0 |
|---|
| 142 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 143 | :debug:clean ncurses 5.7_1 exists in the ports tree |
|---|
| 144 | :debug:clean ncurses 5.7_1 +universal is the latest installed |
|---|
| 145 | :debug:clean ncurses 5.7_1 +universal is active |
|---|
| 146 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 147 | :debug:clean new fully merged portvariants: universal + |
|---|
| 148 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 149 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 150 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 151 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 152 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 153 | :debug:clean adding the default universal variant |
|---|
| 154 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 155 | :debug:clean Executing variant universal provides universal |
|---|
| 156 | :debug:clean No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1 |
|---|
| 157 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 158 | :debug:clean ncursesw 5.7_1 exists in the ports tree |
|---|
| 159 | :debug:clean ncursesw 5.7_1 +universal is the latest installed |
|---|
| 160 | :debug:clean ncursesw 5.7_1 +universal is active |
|---|
| 161 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 162 | :debug:clean new fully merged portvariants: universal + |
|---|
| 163 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 164 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 165 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 166 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:clean adding the default universal variant |
|---|
| 169 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 170 | :debug:clean Executing variant universal provides universal |
|---|
| 171 | :debug:clean No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1 |
|---|
| 172 | :debug:clean epoch: in tree: 1 installed: 1 |
|---|
| 173 | :debug:clean openssl 1.0.0b_0 exists in the ports tree |
|---|
| 174 | :debug:clean openssl 1.0.0b_0 +universal is the latest installed |
|---|
| 175 | :debug:clean openssl 1.0.0b_0 +universal is active |
|---|
| 176 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 177 | :debug:clean new fully merged portvariants: universal + |
|---|
| 178 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 179 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 180 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 181 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 182 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 184 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 185 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 186 | :debug:clean Executing variant universal provides universal |
|---|
| 187 | :debug:clean No need to upgrade! openssl 1.0.0b_0 >= openssl 1.0.0b_0 |
|---|
| 188 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 189 | :debug:clean zlib 1.2.5_0 exists in the ports tree |
|---|
| 190 | :debug:clean zlib 1.2.5_0 +universal is the latest installed |
|---|
| 191 | :debug:clean zlib 1.2.5_0 +universal is active |
|---|
| 192 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 193 | :debug:clean new fully merged portvariants: universal + |
|---|
| 194 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 195 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 196 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 197 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 198 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 200 | :debug:clean adding the default universal variant |
|---|
| 201 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 202 | :debug:clean Executing variant universal provides universal |
|---|
| 203 | :debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 204 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 205 | :debug:clean pcre 8.10_0 exists in the ports tree |
|---|
| 206 | :debug:clean pcre 8.10_0 +universal is the latest installed |
|---|
| 207 | :debug:clean pcre 8.10_0 +universal is active |
|---|
| 208 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 209 | :debug:clean new fully merged portvariants: universal + |
|---|
| 210 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre |
|---|
| 211 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 212 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 215 | :debug:clean adding the default universal variant |
|---|
| 216 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 217 | :debug:clean Executing variant universal provides universal |
|---|
| 218 | :debug:clean No need to upgrade! pcre 8.10_0 >= pcre 8.10_0 |
|---|
| 219 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 220 | :debug:clean bzip2 1.0.6_0 exists in the ports tree |
|---|
| 221 | :debug:clean bzip2 1.0.6_0 +universal is the latest installed |
|---|
| 222 | :debug:clean bzip2 1.0.6_0 +universal is active |
|---|
| 223 | :debug:clean Merging existing variants '+universal' into variants |
|---|
| 224 | :debug:clean new fully merged portvariants: universal + |
|---|
| 225 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 226 | :debug:clean OS darwin/10.5.0 (Mac OS X 10.6) arch i386 |
|---|
| 227 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 228 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 229 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 230 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 231 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 232 | :debug:clean Executing variant universal provides universal |
|---|
| 233 | :debug:clean No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 234 | :msg:clean ---> Computing dependencies for mod_perl2:info:clean .:debug:clean Searching for dependency: perl5 |
|---|
| 235 | :debug:clean Didn't find receipt, going to depspec regex for: perl5 |
|---|
| 236 | :debug:clean Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$ |
|---|
| 237 | :debug:clean Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$ |
|---|
| 238 | :debug:clean Searching for dependency: apache2 |
|---|
| 239 | :debug:clean Found Dependency: receipt exists for apache2 |
|---|
| 240 | :msg:clean |
|---|
| 241 | :debug:main Executing org.macports.main (mod_perl2) |
|---|
| 242 | :msg:main ---> Fetching mod_perl2 |
|---|
| 243 | :debug:fetch fetch phase started at Sat Nov 20 03:18:24 EST 2010 |
|---|
| 244 | :debug:fetch Executing org.macports.fetch (mod_perl2) |
|---|
| 245 | :info:fetch ---> mod_perl-2.0.4.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/mod_perl2 |
|---|
| 246 | :debug:fetch Pinging perl.apache.org... |
|---|
| 247 | :debug:fetch Pinging distfiles.macports.org... |
|---|
| 248 | :debug:fetch Pinging aarnet.au.distfiles.macports.org... |
|---|
| 249 | :debug:fetch Pinging lil.fr.distfiles.macports.org... |
|---|
| 250 | :debug:fetch Pinging sea.us.distfiles.macports.org... |
|---|
| 251 | :debug:fetch perl.apache.org ping time is 99.872 |
|---|
| 252 | :debug:fetch distfiles.macports.org ping time is 89.726 |
|---|
| 253 | :debug:fetch aarnet.au.distfiles.macports.org ping time is 255.595 |
|---|
| 254 | :debug:fetch lil.fr.distfiles.macports.org ping time is 115.970 |
|---|
| 255 | :debug:fetch sea.us.distfiles.macports.org ping time is 10000 |
|---|
| 256 | :msg:fetch ---> Attempting to fetch mod_perl-2.0.4.tar.gz from http://distfiles.macports.org/mod_perl2 |
|---|
| 257 | :msg:fetch ---> Verifying checksum(s) for mod_perl2 |
|---|
| 258 | :debug:checksum checksum phase started at Sat Nov 20 03:18:58 EST 2010 |
|---|
| 259 | :debug:checksum Executing org.macports.checksum (mod_perl2) |
|---|
| 260 | :info:checksum ---> Checksumming mod_perl-2.0.4.tar.gz |
|---|
| 261 | :debug:checksum Correct (md5) checksum for mod_perl-2.0.4.tar.gz |
|---|
| 262 | :debug:checksum Correct (sha1) checksum for mod_perl-2.0.4.tar.gz |
|---|
| 263 | :debug:checksum Correct (rmd160) checksum for mod_perl-2.0.4.tar.gz |
|---|
| 264 | :msg:checksum ---> Extracting mod_perl2 |
|---|
| 265 | :debug:extract extract phase started at Sat Nov 20 03:18:58 EST 2010 |
|---|
| 266 | :debug:extract Executing org.macports.extract (mod_perl2) |
|---|
| 267 | :info:extract ---> Extracting mod_perl-2.0.4.tar.gz |
|---|
| 268 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/mod_perl2/mod_perl-2.0.4.tar.gz' |
|---|
| 269 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 270 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/mod_perl2/mod_perl-2.0.4.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 271 | :debug:patch patch phase started at Sat Nov 20 03:19:01 EST 2010 |
|---|
| 272 | :debug:patch Executing org.macports.patch (mod_perl2) |
|---|
| 273 | :msg:patch ---> Configuring mod_perl2 |
|---|
| 274 | :debug:patch Using compiler 'Mac OS X gcc 4.2' |
|---|
| 275 | :debug:configure configure phase started at Sat Nov 20 03:19:01 EST 2010 |
|---|
| 276 | :debug:configure Executing org.macports.configure (mod_perl2) |
|---|
| 277 | :info:configure Reading Makefile.PL args from @ARGV |
|---|
| 278 | :info:configure MP_APXS = /opt/local/apache2/bin/apxs |
|---|
| 279 | :info:configure no conflicting prior mod_perl version found - good. |
|---|
| 280 | :info:configure Configuring Apache/2.2.17 mod_perl/2.0.4 Perl/v5.12.2 |
|---|
| 281 | :info:configure Checking if your kit is complete... |
|---|
| 282 | :info:configure Looks good |
|---|
| 283 | :info:configure Subroutine MY::postamble redefined at ./Makefile.PL line 167. |
|---|
| 284 | :info:configure Subroutine MY::constants redefined at ./Makefile.PL line 181. |
|---|
| 285 | :info:configure Writing Makefile for Apache::Test |
|---|
| 286 | :info:configure Checking for File::Spec...ok |
|---|
| 287 | :info:configure Checking for Cwd...ok |
|---|
| 288 | :info:configure [ info] generating script t/TEST |
|---|
| 289 | :info:configure [ info] generating script ./t/cgi-bin/cookies.pl |
|---|
| 290 | :info:configure [ info] generating script ./t/cgi-bin/next_available_port.pl |
|---|
| 291 | :info:configure [ info] generating script t/TEST |
|---|
| 292 | :info:configure Checking if your kit is complete... |
|---|
| 293 | :info:configure Looks good |
|---|
| 294 | :info:configure Writing Makefile for ModPerl::Registry |
|---|
| 295 | :info:configure Writing Makefile for APR::Base64 |
|---|
| 296 | :info:configure Writing Makefile for APR::Brigade |
|---|
| 297 | :info:configure Writing Makefile for APR::Bucket |
|---|
| 298 | :info:configure Writing Makefile for APR::BucketAlloc |
|---|
| 299 | :info:configure Writing Makefile for APR::BucketType |
|---|
| 300 | :info:configure Writing Makefile for APR::Date |
|---|
| 301 | :info:configure Writing Makefile for APR::Error |
|---|
| 302 | :info:configure Writing Makefile for APR::Finfo |
|---|
| 303 | :info:configure Writing Makefile for APR::IpSubnet |
|---|
| 304 | :info:configure Writing Makefile for APR::OS |
|---|
| 305 | :info:configure Writing Makefile for APR::Pool |
|---|
| 306 | :info:configure Writing Makefile for APR::SockAddr |
|---|
| 307 | :info:configure Writing Makefile for APR::Socket |
|---|
| 308 | :info:configure Writing Makefile for APR::Status |
|---|
| 309 | :info:configure Writing Makefile for APR::String |
|---|
| 310 | :info:configure Writing Makefile for APR::Table |
|---|
| 311 | :info:configure Writing Makefile for APR::ThreadMutex |
|---|
| 312 | :info:configure Writing Makefile for APR::ThreadRWLock |
|---|
| 313 | :info:configure Writing Makefile for APR::URI |
|---|
| 314 | :info:configure Writing Makefile for APR::UUID |
|---|
| 315 | :info:configure Writing Makefile for APR::Util |
|---|
| 316 | :info:configure Writing Makefile for APR |
|---|
| 317 | :info:configure Writing Makefile for Apache2::Access |
|---|
| 318 | :info:configure Writing Makefile for Apache2::CmdParms |
|---|
| 319 | :info:configure Writing Makefile for Apache2::Command |
|---|
| 320 | :info:configure Writing Makefile for Apache2::Connection |
|---|
| 321 | :info:configure Writing Makefile for Apache2::ConnectionUtil |
|---|
| 322 | :info:configure Writing Makefile for Apache2::Directive |
|---|
| 323 | :info:configure Writing Makefile for Apache2::Filter |
|---|
| 324 | :info:configure Writing Makefile for Apache2::FilterRec |
|---|
| 325 | :info:configure Writing Makefile for Apache2::HookRun |
|---|
| 326 | :info:configure Writing Makefile for Apache2::Log |
|---|
| 327 | :info:configure Writing Makefile for Apache2::MPM |
|---|
| 328 | :info:configure Writing Makefile for Apache2::Module |
|---|
| 329 | :info:configure Writing Makefile for Apache2::Process |
|---|
| 330 | :info:configure Writing Makefile for Apache2::RequestIO |
|---|
| 331 | :info:configure Writing Makefile for Apache2::RequestRec |
|---|
| 332 | :info:configure Writing Makefile for Apache2::RequestUtil |
|---|
| 333 | :info:configure Writing Makefile for Apache2::Response |
|---|
| 334 | :info:configure Writing Makefile for Apache2::ServerRec |
|---|
| 335 | :info:configure Writing Makefile for Apache2::ServerUtil |
|---|
| 336 | :info:configure Writing Makefile for Apache2::SubProcess |
|---|
| 337 | :info:configure Writing Makefile for Apache2::SubRequest |
|---|
| 338 | :info:configure Writing Makefile for Apache2::URI |
|---|
| 339 | :info:configure Writing Makefile for Apache2::Util |
|---|
| 340 | :info:configure Writing Makefile for Apache2 |
|---|
| 341 | :info:configure Writing Makefile for ModPerl::Global |
|---|
| 342 | :info:configure Writing Makefile for ModPerl::Util |
|---|
| 343 | :info:configure Writing Makefile for ModPerl |
|---|
| 344 | :info:configure Writing Makefile for ModPerl::WrapXS |
|---|
| 345 | :info:configure Note (probably harmless): No library found for -ldb-4.6 |
|---|
| 346 | :info:configure Writing Makefile for APR |
|---|
| 347 | :info:configure Writing Makefile for APR::Const |
|---|
| 348 | :info:configure Writing Makefile for APR::PerlIO |
|---|
| 349 | :info:configure Writing Makefile for libaprext |
|---|
| 350 | :info:configure Writing Makefile for APR_build |
|---|
| 351 | :info:configure Writing Makefile for Apache2::Const |
|---|
| 352 | :info:configure Writing Makefile for Apache2_build |
|---|
| 353 | :info:configure Writing Makefile for ModPerl::Const |
|---|
| 354 | :info:configure Writing Makefile for ModPerl |
|---|
| 355 | :info:configure Writing Makefile for ModPerl::XS |
|---|
| 356 | :info:configure Writing Makefile for mod_perl2 |
|---|
| 357 | :info:configure [warning] mod_perl dso library will be built as mod_perl.so |
|---|
| 358 | :info:configure [warning] You'll need to add the following to httpd.conf: |
|---|
| 359 | :info:configure [warning] |
|---|
| 360 | :info:configure [warning] LoadModule perl_module modules/mod_perl.so |
|---|
| 361 | :info:configure [warning] |
|---|
| 362 | :info:configure [warning] depending on your build, mod_perl might not live in |
|---|
| 363 | :info:configure [warning] the modules/ directory. |
|---|
| 364 | :info:configure |
|---|
| 365 | :info:configure [warning] Check the results of |
|---|
| 366 | :info:configure [warning] |
|---|
| 367 | :info:configure [warning] $ /opt/local/apache2/bin/apxs -q LIBEXECDIR |
|---|
| 368 | :info:configure [warning] |
|---|
| 369 | :info:configure [warning] and adjust the LoadModule directive accordingly. |
|---|
| 370 | :info:configure |
|---|
| 371 | :msg:configure ---> Building mod_perl2 |
|---|
| 372 | :debug:build build phase started at Sat Nov 20 03:19:07 EST 2010 |
|---|
| 373 | :debug:build Executing org.macports.build (mod_perl2) |
|---|
| 374 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 375 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4" && /usr/bin/make -j4 all' |
|---|
| 376 | :info:build cd "src/modules/perl" && make |
|---|
| 377 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 378 | :info:build -c mod_perl.c && mv mod_perl.o mod_perl.lo |
|---|
| 379 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 380 | :info:build -c modperl_interp.c && mv modperl_interp.o modperl_interp.lo |
|---|
| 381 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 382 | :info:build -c modperl_tipool.c && mv modperl_tipool.o modperl_tipool.lo |
|---|
| 383 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 384 | :info:build from modperl_perl_includes.h:65, |
|---|
| 385 | :info:build from modperl_common_includes.h:24, |
|---|
| 386 | :info:build from mod_perl.h:21, |
|---|
| 387 | :info:build from mod_perl.c:17: |
|---|
| 388 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 389 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 390 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 391 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 392 | :info:build from modperl_apache_includes.h:30, |
|---|
| 393 | :info:build from mod_perl.h:20, |
|---|
| 394 | :info:build from mod_perl.c:17: |
|---|
| 395 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 396 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 397 | :info:build from modperl_perl_includes.h:65, |
|---|
| 398 | :info:build from modperl_common_includes.h:24, |
|---|
| 399 | :info:build from mod_perl.h:21, |
|---|
| 400 | :info:build from modperl_interp.c:17: |
|---|
| 401 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 402 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 403 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 404 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 405 | :info:build from modperl_apache_includes.h:30, |
|---|
| 406 | :info:build from mod_perl.h:20, |
|---|
| 407 | :info:build from modperl_interp.c:17: |
|---|
| 408 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 409 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 410 | :info:build from modperl_perl_includes.h:65, |
|---|
| 411 | :info:build from modperl_common_includes.h:24, |
|---|
| 412 | :info:build from mod_perl.h:21, |
|---|
| 413 | :info:build from modperl_tipool.c:17: |
|---|
| 414 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 415 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 416 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 417 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 418 | :info:build from modperl_apache_includes.h:30, |
|---|
| 419 | :info:build from mod_perl.h:20, |
|---|
| 420 | :info:build from modperl_tipool.c:17: |
|---|
| 421 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 422 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 423 | :info:build -c modperl_log.c && mv modperl_log.o modperl_log.lo |
|---|
| 424 | :info:build mod_perl.c: In function 'modperl_shutdown': |
|---|
| 425 | :info:build mod_perl.c:62: error: 'my_perl' undeclared (first use in this function) |
|---|
| 426 | :info:build mod_perl.c:62: error: (Each undeclared identifier is reported only once |
|---|
| 427 | :info:build mod_perl.c:62: error: for each function it appears in.) |
|---|
| 428 | :info:build mod_perl.c: In function 'modperl_hook_post_config_last': |
|---|
| 429 | :info:build mod_perl.c:718: error: 'my_perl' undeclared (first use in this function) |
|---|
| 430 | :info:build mod_perl.c: In function 'modperl_child_exit': |
|---|
| 431 | :info:build mod_perl.c:814: error: 'my_perl' undeclared (first use in this function) |
|---|
| 432 | :info:build mod_perl.c: In function 'modperl_response_handler': |
|---|
| 433 | :info:build mod_perl.c:1041: error: 'my_perl' undeclared (first use in this function) |
|---|
| 434 | :info:build mod_perl.c: In function 'modperl_response_handler_cgi': |
|---|
| 435 | :info:build mod_perl.c:1080: error: 'my_perl' undeclared (first use in this function) |
|---|
| 436 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 437 | :info:build -c modperl_config.c && mv modperl_config.o modperl_config.lo |
|---|
| 438 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 439 | :info:build from modperl_perl_includes.h:65, |
|---|
| 440 | :info:build from modperl_common_includes.h:24, |
|---|
| 441 | :info:build from mod_perl.h:21, |
|---|
| 442 | :info:build from mod_perl.c:17: |
|---|
| 443 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 444 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 445 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 446 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 447 | :info:build from modperl_apache_includes.h:30, |
|---|
| 448 | :info:build from mod_perl.h:20, |
|---|
| 449 | :info:build from mod_perl.c:17: |
|---|
| 450 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 451 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 452 | :info:build from modperl_perl_includes.h:65, |
|---|
| 453 | :info:build from modperl_common_includes.h:24, |
|---|
| 454 | :info:build from mod_perl.h:21, |
|---|
| 455 | :info:build from modperl_interp.c:17: |
|---|
| 456 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 457 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 458 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 459 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 460 | :info:build from modperl_apache_includes.h:30, |
|---|
| 461 | :info:build from mod_perl.h:20, |
|---|
| 462 | :info:build from modperl_interp.c:17: |
|---|
| 463 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 464 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 465 | :info:build from modperl_perl_includes.h:65, |
|---|
| 466 | :info:build from modperl_common_includes.h:24, |
|---|
| 467 | :info:build from mod_perl.h:21, |
|---|
| 468 | :info:build from modperl_tipool.c:17: |
|---|
| 469 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 470 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 471 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 472 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 473 | :info:build from modperl_apache_includes.h:30, |
|---|
| 474 | :info:build from mod_perl.h:20, |
|---|
| 475 | :info:build from modperl_tipool.c:17: |
|---|
| 476 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 477 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 478 | :info:build from modperl_perl_includes.h:65, |
|---|
| 479 | :info:build from modperl_common_includes.h:24, |
|---|
| 480 | :info:build from mod_perl.h:21, |
|---|
| 481 | :info:build from modperl_config.c:17: |
|---|
| 482 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 483 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 484 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 485 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 486 | :info:build from modperl_apache_includes.h:30, |
|---|
| 487 | :info:build from mod_perl.h:20, |
|---|
| 488 | :info:build from modperl_config.c:17: |
|---|
| 489 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 490 | :info:build /usr/bin/gcc-4.2 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/src/modules/perl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4/xs -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/apache2/include -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -I/opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE -DMOD_PERL -DMP_COMPAT_1X -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -O3 \ |
|---|
| 491 | :info:build -c modperl_cmd.c && mv modperl_cmd.o modperl_cmd.lo |
|---|
| 492 | :info:build mod_perl.c: In function 'modperl_shutdown': |
|---|
| 493 | :info:build mod_perl.c:62: error: 'my_perl' undeclared (first use in this function) |
|---|
| 494 | :info:build mod_perl.c:62: error: (Each undeclared identifier is reported only once |
|---|
| 495 | :info:build mod_perl.c:62: error: for each function it appears in.) |
|---|
| 496 | :info:build mod_perl.c: In function 'modperl_hook_post_config_last': |
|---|
| 497 | :info:build mod_perl.c:718: error: 'my_perl' undeclared (first use in this function) |
|---|
| 498 | :info:build mod_perl.c: In function 'modperl_child_exit': |
|---|
| 499 | :info:build mod_perl.c:814: error: 'my_perl' undeclared (first use in this function) |
|---|
| 500 | :info:build mod_perl.c: In function 'modperl_response_handler': |
|---|
| 501 | :info:build mod_perl.c:1041: error: 'my_perl' undeclared (first use in this function) |
|---|
| 502 | :info:build mod_perl.c: In function 'modperl_response_handler_cgi': |
|---|
| 503 | :info:build mod_perl.c:1080: error: 'my_perl' undeclared (first use in this function) |
|---|
| 504 | :info:build lipo: can't open input file: /var/tmp//ccksaxGi.out (No such file or directory) |
|---|
| 505 | :info:build make[1]: *** [mod_perl.lo] Error 1 |
|---|
| 506 | :info:build make[1]: *** Waiting for unfinished jobs.... |
|---|
| 507 | :info:build cp bin/mp2bug blib/script/mp2bug |
|---|
| 508 | :info:build /opt/local/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/mp2bug |
|---|
| 509 | :info:build modperl_config.c: In function 'modperl_config_req_cleanup': |
|---|
| 510 | :info:build modperl_config.c:379: error: 'my_perl' undeclared (first use in this function) |
|---|
| 511 | :info:build modperl_config.c:379: error: (Each undeclared identifier is reported only once |
|---|
| 512 | :info:build modperl_config.c:379: error: for each function it appears in.) |
|---|
| 513 | :info:build modperl_config.c: In function 'modperl_config_apply_PerlPostConfigRequire': |
|---|
| 514 | :info:build modperl_config.c:455: error: 'my_perl' undeclared (first use in this function) |
|---|
| 515 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 516 | :info:build from modperl_perl_includes.h:65, |
|---|
| 517 | :info:build from modperl_common_includes.h:24, |
|---|
| 518 | :info:build from mod_perl.h:21, |
|---|
| 519 | :info:build from modperl_cmd.c:17: |
|---|
| 520 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 521 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 522 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 523 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 524 | :info:build from modperl_apache_includes.h:30, |
|---|
| 525 | :info:build from mod_perl.h:20, |
|---|
| 526 | :info:build from modperl_cmd.c:17: |
|---|
| 527 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 528 | :info:build cp lib/Apache2/PerlSections/Dump.pm blib/lib/Apache2/PerlSections/Dump.pm |
|---|
| 529 | :info:build cp lib/Apache2/SizeLimit.pm blib/lib/Apache2/SizeLimit.pm |
|---|
| 530 | :info:build cp lib/ModPerl/TestRun.pm blib/lib/ModPerl/TestRun.pm |
|---|
| 531 | :info:build cp lib/Apache2/compat.pm blib/lib/Apache2/compat.pm |
|---|
| 532 | :info:build cp lib/Apache2/SourceTables.pm blib/lib/Apache2/SourceTables.pm |
|---|
| 533 | :info:build cp lib/ModPerl/Config.pm blib/lib/ModPerl/Config.pm |
|---|
| 534 | :info:build cp lib/ModPerl/Manifest.pm blib/lib/ModPerl/Manifest.pm |
|---|
| 535 | :info:build cp lib/ModPerl/FunctionMap.pm blib/lib/ModPerl/FunctionMap.pm |
|---|
| 536 | :info:build cp lib/ModPerl/CScan.pm blib/lib/ModPerl/CScan.pm |
|---|
| 537 | :info:build cp lib/ModPerl/Code.pm blib/lib/ModPerl/Code.pm |
|---|
| 538 | :info:build cp lib/APR/XSLoader.pm blib/lib/APR/XSLoader.pm |
|---|
| 539 | :info:build cp lib/Bundle/Apache2.pm blib/lib/Bundle/Apache2.pm |
|---|
| 540 | :info:build cp lib/Apache2/PerlSections.pm blib/lib/Apache2/PerlSections.pm |
|---|
| 541 | :info:build cp lib/ModPerl/ParseSource.pm blib/lib/ModPerl/ParseSource.pm |
|---|
| 542 | :info:build cp lib/ModPerl/MM.pm blib/lib/ModPerl/MM.pm |
|---|
| 543 | :info:build cp lib/mod_perl2.pm blib/lib/mod_perl2.pm |
|---|
| 544 | :info:build cp lib/ModPerl/BuildOptions.pm blib/lib/ModPerl/BuildOptions.pm |
|---|
| 545 | :info:build cp lib/typemap blib/arch/auto/Apache2/typemap |
|---|
| 546 | :info:build cp lib/ModPerl/MethodLookup.pm blib/lib/ModPerl/MethodLookup.pm |
|---|
| 547 | :info:build cp lib/ModPerl/WrapXS.pm blib/lib/ModPerl/WrapXS.pm |
|---|
| 548 | :info:build cp lib/Apache2/ParseSource.pm blib/lib/Apache2/ParseSource.pm |
|---|
| 549 | :info:build cp lib/ModPerl/MapUtil.pm blib/lib/ModPerl/MapUtil.pm |
|---|
| 550 | :info:build cp lib/ModPerl/TypeMap.pm blib/lib/ModPerl/TypeMap.pm |
|---|
| 551 | :info:build cp lib/ModPerl/BuildMM.pm blib/lib/ModPerl/BuildMM.pm |
|---|
| 552 | :info:build cp lib/Apache2/Resource.pm blib/lib/Apache2/Resource.pm |
|---|
| 553 | :info:build cp lib/Apache2/Build.pm blib/lib/Apache2/Build.pm |
|---|
| 554 | :info:build AutoSplitting blib/lib/Apache2/Build.pm (blib/lib/auto/Apache2/Build) |
|---|
| 555 | :info:build cp lib/Apache2/XSLoader.pm blib/lib/Apache2/XSLoader.pm |
|---|
| 556 | :info:build cp lib/ModPerl/TestReport.pm blib/lib/ModPerl/TestReport.pm |
|---|
| 557 | :info:build cp lib/Apache2/Status.pm blib/lib/Apache2/Status.pm |
|---|
| 558 | :info:build cp lib/ModPerl/StructureMap.pm blib/lib/ModPerl/StructureMap.pm |
|---|
| 559 | :info:build cp lib/Apache2/BuildConfig.pm blib/lib/Apache2/BuildConfig.pm |
|---|
| 560 | :info:build cp lib/Apache2/porting.pm blib/lib/Apache2/porting.pm |
|---|
| 561 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 562 | :info:build from modperl_perl_includes.h:65, |
|---|
| 563 | :info:build from modperl_common_includes.h:24, |
|---|
| 564 | :info:build from mod_perl.h:21, |
|---|
| 565 | :info:build from modperl_config.c:17modperl_cmd.c: In function 'modperl_cmd_modules':: |
|---|
| 566 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 567 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 568 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 569 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 570 | :info:build from modperl_apache_includes.h:30, |
|---|
| 571 | :info:build from mod_perl.h:20, |
|---|
| 572 | :info:build from modperl_config.c:17: |
|---|
| 573 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 574 | :info:build |
|---|
| 575 | :info:build modperl_cmd.c:190: error: 'my_perl' undeclared (first use in this function) |
|---|
| 576 | :info:build modperl_cmd.c:190: error: (Each undeclared identifier is reported only once |
|---|
| 577 | :info:build modperl_cmd.c:190: error: for each function it appears in.) |
|---|
| 578 | :info:build modperl_cmd.c: In function 'modperl_cmd_requires': |
|---|
| 579 | :info:build modperl_cmd.c:228: error: 'my_perl' undeclared (first use in this function) |
|---|
| 580 | :info:build modperl_cmd.c: In function 'modperl_cmd_set_env': |
|---|
| 581 | :info:build modperl_cmd.c:347: error: 'my_perl' undeclared (first use in this function) |
|---|
| 582 | :info:build modperl_cmd.c: In function 'modperl_cmd_pass_env': |
|---|
| 583 | :info:build modperl_cmd.c:375: error: 'my_perl' undeclared (first use in this function) |
|---|
| 584 | :info:build modperl_cmd.c: In function 'modperl_cmd_perldo': |
|---|
| 585 | :info:build modperl_cmd.c:562: error: 'my_perl' undeclared (first use in this function) |
|---|
| 586 | :info:build modperl_config.c: In function 'modperl_config_req_cleanup': |
|---|
| 587 | :info:build modperl_config.c:379: error: 'my_perl' undeclared (first use in this function) |
|---|
| 588 | :info:build modperl_config.c:379: error: (Each undeclared identifier is reported only once |
|---|
| 589 | :info:build modperl_config.c:379: error: for each function it appears in.) |
|---|
| 590 | :info:build modperl_config.c: In function 'modperl_config_apply_PerlPostConfigRequire': |
|---|
| 591 | :info:build modperl_config.c:455: error: 'my_perl' undeclared (first use in this function) |
|---|
| 592 | :info:build lipo: can't open input file: /var/tmp//cckySzxv.out (No such file or directory) |
|---|
| 593 | :info:build make[1]: *** [modperl_config.lo] Error 1 |
|---|
| 594 | :info:build In file included from /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/perl.h:2429, |
|---|
| 595 | :info:build from modperl_perl_includes.h:65, |
|---|
| 596 | :info:build from modperl_common_includes.h:24, |
|---|
| 597 | :info:build from mod_perl.h:21, |
|---|
| 598 | :info:build from modperl_cmd.c:17: |
|---|
| 599 | :info:build /opt/local/lib/perl5/5.12.2/darwin-multi-2level/CORE/handy.h:108:1: warning: "bool" redefined |
|---|
| 600 | :info:build In file included from /usr/include/mach-o/dyld.h:29, |
|---|
| 601 | :info:build from /opt/local/include/apr-1/apr_portable.h:166, |
|---|
| 602 | :info:build from /opt/local/apache2/include/http_protocol.h:31, |
|---|
| 603 | :info:build from modperl_apache_includes.h:30, |
|---|
| 604 | :info:build from mod_perl.h:20, |
|---|
| 605 | :info:build from modperl_cmd.c:17: |
|---|
| 606 | :info:build /usr/lib/gcc/i686-apple-darwin10/4.2.1/include/stdbool.h:36:1: warning: this is the location of the previous definition |
|---|
| 607 | :info:build cp lib/Apache/TestRun.pm ../blib/lib/Apache/TestRun.pm |
|---|
| 608 | :info:build cp lib/Apache/TestClient.pm ../blib/lib/Apache/TestClient.pm |
|---|
| 609 | :info:build cp lib/Apache/TestMM.pm ../blib/lib/Apache/TestMM.pm |
|---|
| 610 | :info:build cp lib/Apache/TestCommonPost.pm ../blib/lib/Apache/TestCommonPost.pm |
|---|
| 611 | :info:build cp lib/Apache/TestConfigParrot.pm ../blib/lib/Apache/TestConfigParrot.pm |
|---|
| 612 | :info:build cp lib/Apache/TestRunPHP.pm ../blib/lib/Apache/TestRunPHP.pm |
|---|
| 613 | :info:build cp lib/Apache/Test.pm ../blib/lib/Apache/Test.pm |
|---|
| 614 | :info:build cp lib/Apache/TestConfigC.pm ../blib/lib/Apache/TestConfigC.pm |
|---|
| 615 | :info:build cp lib/Apache/TestServer.pm ../blib/lib/Apache/TestServer.pm |
|---|
| 616 | :info:build cp lib/Apache/TestReportPerl.pm ../blib/lib/Apache/TestReportPerl.pm |
|---|
| 617 | :info:build cp lib/Apache/TestConfig.pm ../blib/lib/Apache/TestConfig.pm |
|---|
| 618 | :info:build cp lib/Apache/TestConfigPerl.pm ../blib/lib/Apache/TestConfigPerl.pm |
|---|
| 619 | :info:build cp lib/Apache/TestHarness.pm ../blib/lib/Apache/TestHarness.pm |
|---|
| 620 | :info:build cp lib/Apache/TestUtil.pm ../blib/lib/Apache/TestUtil.pm |
|---|
| 621 | :info:build cp lib/Apache/TestSmoke.pm ../blib/lib/Apache/TestSmoke.pm |
|---|
| 622 | :info:build cp lib/Apache/TestTrace.pm ../blib/lib/Apache/TestTrace.pm |
|---|
| 623 | :info:build cp lib/Apache/TestCommon.pm ../blib/lib/Apache/TestCommon.pm |
|---|
| 624 | :info:build cp lib/Apache/TestSmokePerl.pm ../blib/lib/Apache/TestSmokePerl.pm |
|---|
| 625 | :info:build cp lib/Apache/TestConfigParse.pm ../blib/lib/Apache/TestConfigParse.pm |
|---|
| 626 | :info:build cp lib/Apache/TestConfigPHP.pm ../blib/lib/Apache/TestConfigPHP.pm |
|---|
| 627 | :info:build cp lib/Apache/Test5005compat.pm ../blib/lib/Apache/Test5005compat.pm |
|---|
| 628 | :info:build cp lib/Apache/TestBuild.pm ../blib/lib/Apache/TestBuild.pm |
|---|
| 629 | :info:build cp lib/Apache/TestMB.pm ../blib/lib/Apache/TestMB.pm |
|---|
| 630 | :info:build cp lib/Apache/TestPerlDB.pm ../blib/lib/Apache/TestPerlDB.pm |
|---|
| 631 | :info:build cp lib/Apache/TestRequest.pm ../blib/lib/Apache/TestRequest.pm |
|---|
| 632 | :info:build cp lib/Apache/TestHandler.pm ../blib/lib/Apache/TestHandler.pm |
|---|
| 633 | :info:build cp lib/Apache/TestRunParrot.pm ../blib/lib/Apache/TestRunParrot.pm |
|---|
| 634 | :info:build cp lib/Bundle/ApacheTest.pm ../blib/lib/Bundle/ApacheTest.pm |
|---|
| 635 | :info:build cp lib/Apache/TestHarnessPHP.pm ../blib/lib/Apache/TestHarnessPHP.pm |
|---|
| 636 | :info:build cp lib/Apache/TestRunPerl.pm ../blib/lib/Apache/TestRunPerl.pm |
|---|
| 637 | :info:build cp lib/Apache/TestReport.pm ../blib/lib/Apache/TestReport.pm |
|---|
| 638 | :info:build cp lib/Apache/TestSSLCA.pm ../blib/lib/Apache/TestSSLCA.pm |
|---|
| 639 | :info:build cp lib/Apache/TestSort.pm ../blib/lib/Apache/TestSort.pm |
|---|
| 640 | :info:build modperl_cmd.c: In function 'modperl_cmd_modules': |
|---|
| 641 | :info:build modperl_cmd.c:190: error: 'my_perl' undeclared (first use in this function) |
|---|
| 642 | :info:build modperl_cmd.c:190: error: (Each undeclared identifier is reported only once |
|---|
| 643 | :info:build modperl_cmd.c:190: error: for each function it appears in.) |
|---|
| 644 | :info:build modperl_cmd.c: In function 'modperl_cmd_requires': |
|---|
| 645 | :info:build modperl_cmd.c:228: error: 'my_perl' undeclared (first use in this function) |
|---|
| 646 | :info:build modperl_cmd.c: In function 'modperl_cmd_set_env': |
|---|
| 647 | :info:build modperl_cmd.c:347: error: 'my_perl' undeclared (first use in this function) |
|---|
| 648 | :info:build modperl_cmd.c: In function 'modperl_cmd_pass_env': |
|---|
| 649 | :info:build modperl_cmd.c:375: error: 'my_perl' undeclared (first use in this function) |
|---|
| 650 | :info:build modperl_cmd.c: In function 'modperl_cmd_perldo': |
|---|
| 651 | :info:build modperl_cmd.c:562: error: 'my_perl' undeclared (first use in this function) |
|---|
| 652 | :info:build lipo: can't open input file: /var/tmp//ccflrv4a.out (No such file or directory) |
|---|
| 653 | :info:build make[1]: *** [modperl_cmd.lo] Error 1 |
|---|
| 654 | :info:build make: *** [modperl_lib] Error 2 |
|---|
| 655 | :info:build make: *** Waiting for unfinished jobs.... |
|---|
| 656 | :info:build Manifying ../blib/man3/Apache::TestRun.3pm |
|---|
| 657 | :info:build Manifying ../blib/man3/Apache::TestSmoke.3pm |
|---|
| 658 | :info:build Manifying ../blib/man3/Apache::TestRequest.3pm |
|---|
| 659 | :info:build Manifying ../blib/man3/Apache::TestServer.3pm |
|---|
| 660 | :info:build Manifying ../blib/man3/Apache::TestTrace.3pm |
|---|
| 661 | :info:build Manifying ../blib/man3/Apache::TestConfig.3pm |
|---|
| 662 | :info:build Manifying ../blib/man3/Apache::TestMM.3pm |
|---|
| 663 | :info:build Manifying ../blib/man3/Apache::TestRunPHP.3pm |
|---|
| 664 | :info:build Manifying ../blib/man3/Bundle::ApacheTest.3pm |
|---|
| 665 | :info:build Manifying ../blib/man3/Apache::Test.3pm |
|---|
| 666 | :info:build Manifying ../blib/man3/Apache::TestRunPerl.3pm |
|---|
| 667 | :info:build Manifying ../blib/man3/Apache::TestReport.3pm |
|---|
| 668 | :info:build Manifying ../blib/man3/Apache::TestMB.3pm |
|---|
| 669 | :info:build Manifying ../blib/man3/Apache::TestUtil.3pm |
|---|
| 670 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/work/mod_perl-2.0.4" && /usr/bin/make -j4 all " returned error 2 |
|---|
| 671 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 672 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 673 | while executing |
|---|
| 674 | "command_exec build" |
|---|
| 675 | (procedure "portbuild::build_main" line 8) |
|---|
| 676 | invoked from within |
|---|
| 677 | "$procedure $targetname" |
|---|
| 678 | :info:build Warning: the following items did not execute (for mod_perl2): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 679 | :notice:build Log for mod_perl2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_mod_perl2/main.log |
|---|
