| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.25_2 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.25_2 +universal is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.25_2 +universal is active |
|---|
| 6 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main adding the default universal variant |
|---|
| 13 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 14 | :debug:main Requested variant gtk is not provided by port pkgconfig. |
|---|
| 15 | :debug:main Requested variant x11 is not provided by port pkgconfig. |
|---|
| 16 | :debug:main Requested variant quartz is not provided by port pkgconfig. |
|---|
| 17 | :debug:main Executing variant universal provides universal |
|---|
| 18 | :debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2 |
|---|
| 19 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 20 | :debug:main Xft2 2.2.0_0 exists in the ports tree |
|---|
| 21 | :debug:main Xft2 2.2.0_0 is the latest installed |
|---|
| 22 | :debug:main Xft2 2.2.0_0 is active |
|---|
| 23 | :debug:main Merging existing variants '' into variants |
|---|
| 24 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 25 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 26 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 27 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 29 | :debug:main adding the default universal variant |
|---|
| 30 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 31 | :debug:main Requested variant gtk is not provided by port Xft2. |
|---|
| 32 | :debug:main Requested variant x11 is not provided by port Xft2. |
|---|
| 33 | :debug:main Requested variant quartz is not provided by port Xft2. |
|---|
| 34 | :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 |
|---|
| 35 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 36 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 37 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 38 | :debug:main zlib 1.2.5_0 +universal is active |
|---|
| 39 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 40 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 41 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 42 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 43 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 44 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 45 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 46 | :debug:main adding the default universal variant |
|---|
| 47 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 48 | :debug:main Requested variant gtk is not provided by port zlib. |
|---|
| 49 | :debug:main Requested variant x11 is not provided by port zlib. |
|---|
| 50 | :debug:main Requested variant quartz is not provided by port zlib. |
|---|
| 51 | :debug:main Executing variant universal provides universal |
|---|
| 52 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 53 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 54 | :debug:main xrender 0.9.6_0 exists in the ports tree |
|---|
| 55 | :debug:main xrender 0.9.6_0 is the latest installed |
|---|
| 56 | :debug:main xrender 0.9.6_0 is active |
|---|
| 57 | :debug:main Merging existing variants '' into variants |
|---|
| 58 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 59 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 60 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 61 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 62 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 63 | :debug:main adding the default universal variant |
|---|
| 64 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 65 | :debug:main Requested variant gtk is not provided by port xrender. |
|---|
| 66 | :debug:main Requested variant x11 is not provided by port xrender. |
|---|
| 67 | :debug:main Requested variant quartz is not provided by port xrender. |
|---|
| 68 | :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 |
|---|
| 69 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 70 | :debug:main xorg-libX11 1.4.1_0 exists in the ports tree |
|---|
| 71 | :debug:main xorg-libX11 1.4.1_0 is the latest installed |
|---|
| 72 | :debug:main xorg-libX11 1.4.1_0 is active |
|---|
| 73 | :debug:main Merging existing variants '' into variants |
|---|
| 74 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 75 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 76 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 77 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 78 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 79 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 80 | :debug:main adding the default universal variant |
|---|
| 81 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 82 | :debug:main Requested variant gtk is not provided by port xorg-libX11. |
|---|
| 83 | :debug:main Requested variant x11 is not provided by port xorg-libX11. |
|---|
| 84 | :debug:main Requested variant quartz is not provided by port xorg-libX11. |
|---|
| 85 | :debug:main No need to upgrade! xorg-libX11 1.4.1_0 >= xorg-libX11 1.4.1_0 |
|---|
| 86 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 87 | :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 88 | :debug:main xorg-libXdmcp 1.1.0_0 +universal is the latest installed |
|---|
| 89 | :debug:main xorg-libXdmcp 1.1.0_0 +universal is active |
|---|
| 90 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 91 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 92 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 93 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 94 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 95 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 96 | :debug:main adding the default universal variant |
|---|
| 97 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 98 | :debug:main Requested variant gtk is not provided by port xorg-libXdmcp. |
|---|
| 99 | :debug:main Requested variant x11 is not provided by port xorg-libXdmcp. |
|---|
| 100 | :debug:main Requested variant quartz is not provided by port xorg-libXdmcp. |
|---|
| 101 | :debug:main Executing variant universal provides universal |
|---|
| 102 | :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 103 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 104 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 105 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 106 | :debug:main xorg-libXau 1.0.6_0 +universal is active |
|---|
| 107 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 108 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 109 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 110 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 111 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 112 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 113 | :debug:main adding the default universal variant |
|---|
| 114 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 115 | :debug:main Requested variant gtk is not provided by port xorg-libXau. |
|---|
| 116 | :debug:main Requested variant x11 is not provided by port xorg-libXau. |
|---|
| 117 | :debug:main Requested variant quartz is not provided by port xorg-libXau. |
|---|
| 118 | :debug:main Executing variant universal provides universal |
|---|
| 119 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 120 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 121 | :debug:main xorg-xproto 7.0.20_0 exists in the ports tree |
|---|
| 122 | :debug:main xorg-xproto 7.0.20_0 is the latest installed |
|---|
| 123 | :debug:main xorg-xproto 7.0.20_0 is active |
|---|
| 124 | :debug:main Merging existing variants '' into variants |
|---|
| 125 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 126 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 127 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 128 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 129 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 130 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 131 | :debug:main Requested variant gtk is not provided by port xorg-xproto. |
|---|
| 132 | :debug:main Requested variant x11 is not provided by port xorg-xproto. |
|---|
| 133 | :debug:main Requested variant quartz is not provided by port xorg-xproto. |
|---|
| 134 | :debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto 7.0.20_0 |
|---|
| 135 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 136 | :debug:main xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 137 | :debug:main xorg-libxcb 1.7_0 +python26 is the latest installed |
|---|
| 138 | :debug:main xorg-libxcb 1.7_0 +python26 is active |
|---|
| 139 | :debug:main Merging existing variants '+python26' into variants |
|---|
| 140 | :debug:main new fully merged portvariants: x11 + gtk + python26 + quartz - |
|---|
| 141 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb |
|---|
| 142 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 143 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 144 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 145 | :debug:main adding the default universal variant |
|---|
| 146 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 147 | :debug:main Requested variant gtk is not provided by port xorg-libxcb. |
|---|
| 148 | :debug:main Requested variant x11 is not provided by port xorg-libxcb. |
|---|
| 149 | :debug:main Requested variant quartz is not provided by port xorg-libxcb. |
|---|
| 150 | :debug:main Executing variant python26 provides python26 |
|---|
| 151 | :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 |
|---|
| 152 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 153 | :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 154 | :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed |
|---|
| 155 | :debug:main xorg-xcb-proto 1.6_0 +python26 is active |
|---|
| 156 | :debug:main Merging existing variants '+python26' into variants |
|---|
| 157 | :debug:main new fully merged portvariants: x11 + gtk + python26 + quartz - |
|---|
| 158 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto |
|---|
| 159 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 160 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 162 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 163 | :debug:main Requested variant gtk is not provided by port xorg-xcb-proto. |
|---|
| 164 | :debug:main Requested variant x11 is not provided by port xorg-xcb-proto. |
|---|
| 165 | :debug:main Requested variant quartz is not provided by port xorg-xcb-proto. |
|---|
| 166 | :debug:main Executing variant python26 provides python26 |
|---|
| 167 | :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 168 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 169 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 170 | :debug:main libxml2 2.7.8_0 +universal is the latest installed |
|---|
| 171 | :debug:main libxml2 2.7.8_0 +universal is active |
|---|
| 172 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 173 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 174 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 175 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 176 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 177 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 178 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 179 | :debug:main adding the default universal variant |
|---|
| 180 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 181 | :debug:main Requested variant gtk is not provided by port libxml2. |
|---|
| 182 | :debug:main Requested variant x11 is not provided by port libxml2. |
|---|
| 183 | :debug:main Requested variant quartz is not provided by port libxml2. |
|---|
| 184 | :debug:main Executing variant universal provides universal |
|---|
| 185 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 186 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 187 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 188 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 189 | :debug:main libiconv 1.13.1_0 +universal is active |
|---|
| 190 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 191 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 192 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 193 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 194 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 195 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 196 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 197 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 198 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 199 | :debug:main Requested variant gtk is not provided by port libiconv. |
|---|
| 200 | :debug:main Requested variant x11 is not provided by port libiconv. |
|---|
| 201 | :debug:main Requested variant quartz is not provided by port libiconv. |
|---|
| 202 | :debug:main Executing variant universal provides universal |
|---|
| 203 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 204 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 205 | :debug:main python26 2.6.6_1 exists in the ports tree |
|---|
| 206 | :debug:main python26 2.6.6_1 is the latest installed |
|---|
| 207 | :debug:main python26 2.6.6_1 is active |
|---|
| 208 | :debug:main Merging existing variants '' into variants |
|---|
| 209 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 210 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 |
|---|
| 211 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 212 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 215 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 216 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 217 | :debug:main Requested variant gtk is not provided by port python26. |
|---|
| 218 | :debug:main Requested variant x11 is not provided by port python26. |
|---|
| 219 | :debug:main Requested variant quartz is not provided by port python26. |
|---|
| 220 | :debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1 |
|---|
| 221 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 222 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 223 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 224 | :debug:main gettext 0.18.1.1_2 +universal is active |
|---|
| 225 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 226 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 227 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 228 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 229 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 230 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 231 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 232 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 233 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 234 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 235 | :debug:main Requested variant gtk is not provided by port gettext. |
|---|
| 236 | :debug:main Requested variant x11 is not provided by port gettext. |
|---|
| 237 | :debug:main Requested variant quartz is not provided by port gettext. |
|---|
| 238 | :debug:main Executing variant universal provides universal |
|---|
| 239 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 240 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 241 | :debug:main ncurses 5.7_1 exists in the ports tree |
|---|
| 242 | :debug:main ncurses 5.7_1 is the latest installed |
|---|
| 243 | :debug:main ncurses 5.7_1 +universal is active |
|---|
| 244 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 245 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 246 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 247 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 248 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 249 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 250 | :debug:main adding the default universal variant |
|---|
| 251 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 252 | :debug:main Requested variant gtk is not provided by port ncurses. |
|---|
| 253 | :debug:main Requested variant x11 is not provided by port ncurses. |
|---|
| 254 | :debug:main Requested variant quartz is not provided by port ncurses. |
|---|
| 255 | :debug:main Executing variant universal provides universal |
|---|
| 256 | :debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1 |
|---|
| 257 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 258 | :debug:main ncursesw 5.7_1 exists in the ports tree |
|---|
| 259 | :debug:main ncursesw 5.7_1 is the latest installed |
|---|
| 260 | :debug:main ncursesw 5.7_1 +universal is active |
|---|
| 261 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 262 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 263 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 264 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 265 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 266 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 267 | :debug:main adding the default universal variant |
|---|
| 268 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 269 | :debug:main Requested variant gtk is not provided by port ncursesw. |
|---|
| 270 | :debug:main Requested variant x11 is not provided by port ncursesw. |
|---|
| 271 | :debug:main Requested variant quartz is not provided by port ncursesw. |
|---|
| 272 | :debug:main Executing variant universal provides universal |
|---|
| 273 | :debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1 |
|---|
| 274 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 275 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 276 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 277 | :debug:main expat 2.0.1_1 +universal is active |
|---|
| 278 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 279 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 280 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 281 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 282 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 283 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 284 | :debug:main adding the default universal variant |
|---|
| 285 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 286 | :debug:main Requested variant gtk is not provided by port expat. |
|---|
| 287 | :debug:main Requested variant x11 is not provided by port expat. |
|---|
| 288 | :debug:main Requested variant quartz is not provided by port expat. |
|---|
| 289 | :debug:main Executing variant universal provides universal |
|---|
| 290 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 291 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 292 | :debug:main openssl 1.0.0c_0 exists in the ports tree |
|---|
| 293 | :debug:main openssl 1.0.0c_0 is the latest installed |
|---|
| 294 | :debug:main openssl 1.0.0c_0 is active |
|---|
| 295 | :debug:main Merging existing variants '' into variants |
|---|
| 296 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 297 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 298 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 299 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 300 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 301 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 302 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 303 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 304 | :debug:main Requested variant gtk is not provided by port openssl. |
|---|
| 305 | :debug:main Requested variant x11 is not provided by port openssl. |
|---|
| 306 | :debug:main Requested variant quartz is not provided by port openssl. |
|---|
| 307 | :debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0 |
|---|
| 308 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 309 | :debug:main sqlite3 3.7.4_0 exists in the ports tree |
|---|
| 310 | :debug:main sqlite3 3.7.4_0 is the latest installed |
|---|
| 311 | :debug:main sqlite3 3.7.4_0 is active |
|---|
| 312 | :debug:main Merging existing variants '' into variants |
|---|
| 313 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 314 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 315 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 316 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 317 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | :debug:main adding the default universal variant |
|---|
| 319 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 320 | :debug:main Requested variant gtk is not provided by port sqlite3. |
|---|
| 321 | :debug:main Requested variant x11 is not provided by port sqlite3. |
|---|
| 322 | :debug:main Requested variant quartz is not provided by port sqlite3. |
|---|
| 323 | :debug:main No need to upgrade! sqlite3 3.7.4_0 >= sqlite3 3.7.4_0 |
|---|
| 324 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 325 | :debug:main readline 6.1.002_0 exists in the ports tree |
|---|
| 326 | :debug:main readline 6.1.002_0 is the latest installed |
|---|
| 327 | :debug:main readline 6.1.002_0 is active |
|---|
| 328 | :debug:main Merging existing variants '' into variants |
|---|
| 329 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 330 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 331 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 332 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 333 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 334 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 335 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 336 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 337 | :debug:main Requested variant gtk is not provided by port readline. |
|---|
| 338 | :debug:main Requested variant x11 is not provided by port readline. |
|---|
| 339 | :debug:main Requested variant quartz is not provided by port readline. |
|---|
| 340 | :debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0 |
|---|
| 341 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 342 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 343 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 344 | :debug:main db46 4.6.21_6 is active |
|---|
| 345 | :debug:main Merging existing variants '' into variants |
|---|
| 346 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 347 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 348 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 349 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 350 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 351 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 352 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 353 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 354 | :debug:main Requested variant gtk is not provided by port db46. |
|---|
| 355 | :debug:main Requested variant x11 is not provided by port db46. |
|---|
| 356 | :debug:main Requested variant quartz is not provided by port db46. |
|---|
| 357 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 358 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 359 | :debug:main gdbm 1.8.3_3 exists in the ports tree |
|---|
| 360 | :debug:main gdbm 1.8.3_3 is the latest installed |
|---|
| 361 | :debug:main gdbm 1.8.3_3 is active |
|---|
| 362 | :debug:main Merging existing variants '' into variants |
|---|
| 363 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 364 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 365 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 366 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 367 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 368 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 369 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 370 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 371 | :debug:main Requested variant gtk is not provided by port gdbm. |
|---|
| 372 | :debug:main Requested variant x11 is not provided by port gdbm. |
|---|
| 373 | :debug:main Requested variant quartz is not provided by port gdbm. |
|---|
| 374 | :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 |
|---|
| 375 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 376 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 377 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 378 | :debug:main bzip2 1.0.6_0 is active |
|---|
| 379 | :debug:main Merging existing variants '' into variants |
|---|
| 380 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 381 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 382 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 383 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 384 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 385 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 386 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 387 | :debug:main Requested variant gtk is not provided by port bzip2. |
|---|
| 388 | :debug:main Requested variant x11 is not provided by port bzip2. |
|---|
| 389 | :debug:main Requested variant quartz is not provided by port bzip2. |
|---|
| 390 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 391 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 392 | :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 393 | :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 394 | :debug:main xorg-libpthread-stubs 0.3_0 is active |
|---|
| 395 | :debug:main Merging existing variants '' into variants |
|---|
| 396 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 397 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 398 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 399 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 400 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 401 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 402 | :debug:main Requested variant gtk is not provided by port xorg-libpthread-stubs. |
|---|
| 403 | :debug:main Requested variant x11 is not provided by port xorg-libpthread-stubs. |
|---|
| 404 | :debug:main Requested variant quartz is not provided by port xorg-libpthread-stubs. |
|---|
| 405 | :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 406 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 407 | :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree |
|---|
| 408 | :debug:main xorg-kbproto 1.0.5_0 is the latest installed |
|---|
| 409 | :debug:main xorg-kbproto 1.0.5_0 is active |
|---|
| 410 | :debug:main Merging existing variants '' into variants |
|---|
| 411 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 412 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 413 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 414 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 415 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 416 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 417 | :debug:main Requested variant gtk is not provided by port xorg-kbproto. |
|---|
| 418 | :debug:main Requested variant x11 is not provided by port xorg-kbproto. |
|---|
| 419 | :debug:main Requested variant quartz is not provided by port xorg-kbproto. |
|---|
| 420 | :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 |
|---|
| 421 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 422 | :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree |
|---|
| 423 | :debug:main xorg-renderproto 0.11.1_0 is the latest installed |
|---|
| 424 | :debug:main xorg-renderproto 0.11.1_0 is active |
|---|
| 425 | :debug:main Merging existing variants '' into variants |
|---|
| 426 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 427 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 428 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 429 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 430 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 431 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 432 | :debug:main Requested variant gtk is not provided by port xorg-renderproto. |
|---|
| 433 | :debug:main Requested variant x11 is not provided by port xorg-renderproto. |
|---|
| 434 | :debug:main Requested variant quartz is not provided by port xorg-renderproto. |
|---|
| 435 | :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 |
|---|
| 436 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 437 | :debug:main freetype 2.4.4_0 exists in the ports tree |
|---|
| 438 | :debug:main freetype 2.4.4_0 is the latest installed |
|---|
| 439 | :debug:main freetype 2.4.4_0 is active |
|---|
| 440 | :debug:main Merging existing variants '' into variants |
|---|
| 441 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 442 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 443 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 444 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 445 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 446 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 447 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 448 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 449 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 450 | :debug:main Requested variant gtk is not provided by port freetype. |
|---|
| 451 | :debug:main Requested variant x11 is not provided by port freetype. |
|---|
| 452 | :debug:main Requested variant quartz is not provided by port freetype. |
|---|
| 453 | :debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0 |
|---|
| 454 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 455 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 456 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 457 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 458 | :debug:main Merging existing variants '' into variants |
|---|
| 459 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 460 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 461 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 462 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 463 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 464 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 465 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 466 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 467 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 468 | :debug:main Requested variant gtk is not provided by port fontconfig. |
|---|
| 469 | :debug:main Requested variant x11 is not provided by port fontconfig. |
|---|
| 470 | :debug:main Requested variant quartz is not provided by port fontconfig. |
|---|
| 471 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 472 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 473 | :debug:main perl5 5.8.9_0 exists in the ports tree |
|---|
| 474 | :debug:main perl5 5.8.9_0 is the latest installed |
|---|
| 475 | :debug:main perl5 5.8.9_0 is active |
|---|
| 476 | :debug:main Merging existing variants '' into variants |
|---|
| 477 | :debug:main new fully merged portvariants: x11 + gtk + quartz - |
|---|
| 478 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 479 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 480 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 481 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 482 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 483 | :debug:main Requested variant gtk is not provided by port perl5. |
|---|
| 484 | :debug:main Requested variant x11 is not provided by port perl5. |
|---|
| 485 | :debug:main Requested variant quartz is not provided by port perl5. |
|---|
| 486 | :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
|---|
| 487 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 488 | :debug:main perl5.8 5.8.9_3 exists in the ports tree |
|---|
| 489 | :debug:main perl5.8 5.8.9_3 is the latest installed |
|---|
| 490 | :debug:main perl5.8 5.8.9_3 +universal is active |
|---|
| 491 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 492 | :debug:main new fully merged portvariants: universal + x11 + gtk + quartz - |
|---|
| 493 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
|---|
| 494 | :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc |
|---|
| 495 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 496 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 497 | :debug:main adding the default universal variant |
|---|
| 498 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 499 | :debug:main Requested variant gtk is not provided by port perl5.8. |
|---|
| 500 | :debug:main Requested variant x11 is not provided by port perl5.8. |
|---|
| 501 | :debug:main Requested variant quartz is not provided by port perl5.8. |
|---|
| 502 | :debug:main Executing variant universal provides universal |
|---|
| 503 | :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
|---|
| 504 | :msg:main ---> Computing dependencies for rxvt-unicode:info:main .:debug:main Searching for dependency: pkgconfig |
|---|
| 505 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 506 | :debug:main Searching for dependency: Xft2 |
|---|
| 507 | :debug:main Found Dependency: receipt exists for Xft2 |
|---|
| 508 | :debug:main Searching for dependency: expat |
|---|
| 509 | :debug:main Found Dependency: receipt exists for expat |
|---|
| 510 | :debug:main Searching for dependency: ncursesw |
|---|
| 511 | :debug:main Found Dependency: receipt exists for ncursesw |
|---|
| 512 | :debug:main Searching for dependency: perl5 |
|---|
| 513 | :debug:main Found Dependency: receipt exists for perl5 |
|---|
| 514 | :debug:main Searching for dependency: zlib |
|---|
| 515 | :debug:main Found Dependency: receipt exists for zlib |
|---|
| 516 | :msg:main |
|---|
| 517 | :debug:main Executing org.macports.main (rxvt-unicode) |
|---|
| 518 | :debug:main Skipping completed org.macports.fetch (rxvt-unicode) |
|---|
| 519 | :debug:main Skipping completed org.macports.checksum (rxvt-unicode) |
|---|
| 520 | :debug:main setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 521 | :debug:main Skipping completed org.macports.extract (rxvt-unicode) |
|---|
| 522 | :debug:main Skipping completed org.macports.patch (rxvt-unicode) |
|---|
| 523 | :debug:main Skipping completed org.macports.configure (rxvt-unicode) |
|---|
| 524 | :msg:main ---> Building rxvt-unicode |
|---|
| 525 | :debug:build build phase started at Sat Jan 29 08:24:22 CST 2011 |
|---|
| 526 | :debug:build Executing org.macports.build (rxvt-unicode) |
|---|
| 527 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_rxvt-unicode/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.4' |
|---|
| 528 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_rxvt-unicode/work/rxvt-unicode-9.10" && /usr/bin/make all' |
|---|
| 529 | :info:build /usr/bin/gcc-4.0 -L/opt/local/lib -arch ppc -o rxvt rxvt.o background.o command.o rxvtfont.o init.o logging.o main.o misc.o ptytty.o proxy.o screen.o scrollbar.o scrollbar-next.o scrollbar-rxvt.o scrollbar-xterm.o scrollbar-plain.o xdefaults.o encoding.o rxvttoolkit.o rxvtutil.o keyboard.o fdpass.o ev_cpp.o rxvtperl.o -lm -lsupc++ -lm -L/opt/local/lib -lfontconfig -L/opt/local/lib -lXft -L/opt/local/lib -lXrender -lX11 -L/opt/local/lib -lX11 -L/opt/local/lib -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc -L/usr/local/lib -L/opt/local/lib/perl5/5.8.9/darwin-2level/CORE -lperl -ldl -lm -lutil -lc |
|---|
| 530 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: for architecture i386 |
|---|
| 531 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning rxvt.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 532 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning background.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 533 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning command.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 534 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning rxvtfont.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 535 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning init.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 536 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning logging.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 537 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning main.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 538 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning misc.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 539 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning ptytty.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 540 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning proxy.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 541 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning screen.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 542 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning scrollbar.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 543 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning scrollbar-next.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 544 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning scrollbar-rxvt.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 545 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning scrollbar-xterm.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 546 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning scrollbar-plain.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 547 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning xdefaults.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 548 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning encoding.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 549 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning rxvttoolkit.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 550 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning rxvtutil.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 551 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning keyboard.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 552 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning fdpass.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 553 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning ev_cpp.o cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 554 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libfontconfig.dylib cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 555 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libXft.dylib cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 556 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libXrender.dylib cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 557 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libX11.dylib cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 558 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libX11.dylib cputype (18, architecture ppc) does not match cputype (7) for specified -arch flag: i386 (file not loaded) |
|---|
| 559 | :info:build /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: |
|---|
| 560 | :info:build _main |
|---|
| 561 | :info:build _XAllowEvents |
|---|
| 562 | :info:build _XChangeProperty |
|---|
| 563 | :info:build _XDeleteProperty |
|---|
| 564 | :info:build _XFree |
|---|
| 565 | :info:build _XGetAtomName |
|---|
| 566 | :info:build _XGetWindowAttributes |
|---|
| 567 | :info:build _XGetWindowProperty |
|---|
| 568 | :info:build _XGrabButton |
|---|
| 569 | :info:build _XGrabKey |
|---|
| 570 | :info:build _XGrabKeyboard |
|---|
| 571 | :info:build _XGrabPointer |
|---|
| 572 | :info:build _XInternAtom |
|---|
| 573 | :info:build _XKeycodeToKeysym |
|---|
| 574 | :info:build _XKeysymToKeycode |
|---|
| 575 | :info:build _XKeysymToString |
|---|
| 576 | :info:build _XListProperties |
|---|
| 577 | :info:build _XMapWindow |
|---|
| 578 | :info:build _XMoveResizeWindow |
|---|
| 579 | :info:build _XReparentWindow |
|---|
| 580 | :info:build _XSelectInput |
|---|
| 581 | :info:build _XStringToKeysym |
|---|
| 582 | :info:build _XTranslateCoordinates |
|---|
| 583 | :info:build _XUngrabButton |
|---|
| 584 | :info:build _XUngrabKey |
|---|
| 585 | :info:build _XUngrabKeyboard |
|---|
| 586 | :info:build _XUngrabPointer |
|---|
| 587 | :info:build _XUnmapWindow |
|---|
| 588 | :info:build rxvt_fatal(char const*, ...) |
|---|
| 589 | :info:build rxvt_compose(unsigned int, unsigned int) |
|---|
| 590 | :info:build rxvt_mbstowcs(char const*, int) |
|---|
| 591 | :info:build rxvt_temp_buf(int) |
|---|
| 592 | :info:build rxvt_wcstombs(wchar_t const*, int) |
|---|
| 593 | :info:build rxvt_utf8towcs(char const*, int) |
|---|
| 594 | :info:build rxvt_wcstoutf8(wchar_t const*, int) |
|---|
| 595 | :info:build rxvt_pop_locale() |
|---|
| 596 | :info:build rxvt_push_locale(char const*) |
|---|
| 597 | :info:build rxvt_warn(char const*, ...) |
|---|
| 598 | :info:build rxvt_fontset::find_font_idx(unsigned int) |
|---|
| 599 | :info:build keyboard_manager::register_done() |
|---|
| 600 | :info:build zero_initialized::operator delete(void*, unsigned long) |
|---|
| 601 | :info:build zero_initialized::operator new(unsigned long) |
|---|
| 602 | :info:build rxvt_composite_vec::expand(unsigned int, wchar_t*) |
|---|
| 603 | :info:build rxvt_composite_vec::compose(unsigned int, unsigned int) |
|---|
| 604 | :info:build rxvt_term::set_option(unsigned char, bool) |
|---|
| 605 | :info:build rxvt_term::x_resource(char const*) |
|---|
| 606 | :info:build rxvt_term::key_release(XKeyEvent&) |
|---|
| 607 | :info:build rxvt_term::parse_keysym(char const*, char const*) |
|---|
| 608 | :info:build rxvt_term::scr_xor_rect(int, int, int, int, unsigned int, unsigned int) |
|---|
| 609 | :info:build rxvt_term::scr_xor_span(int, int, int, int, unsigned int) |
|---|
| 610 | :info:build rxvt_term::refresh_check() |
|---|
| 611 | :info:build rxvt_term::scr_add_lines(wchar_t const*, int, int) |
|---|
| 612 | :info:build rxvt_term::scr_changeview(int) |
|---|
| 613 | :info:build rxvt_term::selection_grab(unsigned long, bool) |
|---|
| 614 | :info:build rxvt_term::selection_make(unsigned long) |
|---|
| 615 | :info:build rxvt_term::scr_remap_chars() |
|---|
| 616 | :info:build rxvt_term::selection_clear(bool) |
|---|
| 617 | :info:build rxvt_term::scr_change_screen(int) |
|---|
| 618 | :info:build rxvt_term::init(int, char const* const*, stringvec*) |
|---|
| 619 | :info:build rxvt_term::destroy() |
|---|
| 620 | :info:build rxvt_term::focus_in() |
|---|
| 621 | :info:build rxvt_term::scr_bell() |
|---|
| 622 | :info:build rxvt_term::termlist |
|---|
| 623 | :info:build rxvt_term::tt_paste(char*, unsigned int) |
|---|
| 624 | :info:build rxvt_term::tt_write(char const*, unsigned int) |
|---|
| 625 | :info:build rxvt_term::cmd_parse() |
|---|
| 626 | :info:build rxvt_term::focus_out() |
|---|
| 627 | :info:build rxvt_term::key_press(XKeyEvent&) |
|---|
| 628 | :info:build rxvt_term::scr_touch(bool) |
|---|
| 629 | :info:build rxvt_term::set_fonts() |
|---|
| 630 | :info:build rxvt_term::rxvt_term() |
|---|
| 631 | :info:build _ev_child_start |
|---|
| 632 | :info:build _ev_child_stop |
|---|
| 633 | :info:build _ev_idle_start |
|---|
| 634 | :info:build _ev_idle_stop |
|---|
| 635 | :info:build _ev_io_start |
|---|
| 636 | :info:build _ev_io_stop |
|---|
| 637 | :info:build _ev_rt_now |
|---|
| 638 | :info:build _ev_time |
|---|
| 639 | :info:build _ev_timer_remaining |
|---|
| 640 | :info:build _ev_timer_start |
|---|
| 641 | :info:build _ev_timer_stop |
|---|
| 642 | :info:build _rxvt_composite |
|---|
| 643 | :info:build _rxvt_environ |
|---|
| 644 | :info:build collect2: ld returned 1 exit status |
|---|
| 645 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: for architecture ppc |
|---|
| 646 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning /opt/local/lib/libutil.dylib cputype (7, architecture i386) does not match cputype (18) for specified -arch flag: ppc (file not loaded) |
|---|
| 647 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libiconv.2.dylib referenced from: /opt/local/lib/libfontconfig.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 648 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libfreetype.6.dylib referenced from: /opt/local/lib/libfontconfig.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 649 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libz.1.dylib referenced from: /opt/local/lib/libfontconfig.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 650 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libexpat.1.dylib referenced from: /opt/local/lib/libfontconfig.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 651 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libxcb.1.dylib referenced from: /opt/local/lib/libXft.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 652 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libXau.6.dylib referenced from: /opt/local/lib/libXft.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 653 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libXdmcp.6.dylib referenced from: /opt/local/lib/libXft.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) |
|---|
| 654 | :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: Undefined symbols: |
|---|
| 655 | :info:build _xcb_disconnect referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 656 | :info:build _xcb_get_maximum_request_length referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 657 | :info:build _xcb_get_setup referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 658 | :info:build _xcb_connect referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 659 | :info:build _xcb_connect_to_display_with_auth_info referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 660 | :info:build _xcb_connection_has_error referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 661 | :info:build _xcb_generate_id referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 662 | :info:build _xcb_get_file_descriptor referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 663 | :info:build _xcb_parse_display referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 664 | :info:build _xcb_poll_for_event referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 665 | :info:build _xcb_poll_for_reply referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 666 | :info:build _xcb_take_socket referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 667 | :info:build _xcb_wait_for_event referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 668 | :info:build _xcb_wait_for_reply referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 669 | :info:build _xcb_writev referenced from libX11 expected to be defined in /opt/local/lib/libxcb.1.dylib |
|---|
| 670 | :info:build _FT_Done_Face referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 671 | :info:build _FT_Done_FreeType referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 672 | :info:build _FT_Get_BDF_Property referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 673 | :info:build _FT_Get_Char_Index referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 674 | :info:build _FT_Get_First_Char referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 675 | :info:build _FT_Get_Glyph_Name referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 676 | :info:build _FT_Get_Next_Char referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 677 | :info:build _FT_Get_PS_Font_Info referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 678 | :info:build _FT_Get_Sfnt_Name referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 679 | :info:build _FT_Get_Sfnt_Name_Count referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 680 | :info:build _FT_Get_Sfnt_Table referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 681 | :info:build _FT_Get_X11_Font_Format referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 682 | :info:build _FT_Has_PS_Glyph_Names referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 683 | :info:build _FT_Init_FreeType referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 684 | :info:build _FT_Load_Glyph referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 685 | :info:build _FT_Load_Sfnt_Table referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 686 | :info:build _FT_New_Face referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 687 | :info:build _FT_Select_Charmap referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 688 | :info:build _FT_Select_Size referenced from libfontconfig expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 689 | :info:build _libiconv referenced from libfontconfig expected to be defined in /opt/local/lib/libiconv.2.dylib |
|---|
| 690 | :info:build _libiconv_close referenced from libfontconfig expected to be defined in /opt/local/lib/libiconv.2.dylib |
|---|
| 691 | :info:build _libiconv_open referenced from libfontconfig expected to be defined in /opt/local/lib/libiconv.2.dylib |
|---|
| 692 | :info:build _XML_ErrorString referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 693 | :info:build _XML_GetBuffer referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 694 | :info:build _XML_GetCurrentLineNumber referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 695 | :info:build _XML_GetErrorCode referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 696 | :info:build _XML_ParseBuffer referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 697 | :info:build _XML_ParserCreate referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 698 | :info:build _XML_ParserFree referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 699 | :info:build _XML_SetCharacterDataHandler referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 700 | :info:build _XML_SetDoctypeDeclHandler referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 701 | :info:build _XML_SetElementHandler referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 702 | :info:build _XML_SetUserData referenced from libfontconfig expected to be defined in /opt/local/lib/libexpat.1.dylib |
|---|
| 703 | :info:build _FT_Set_Char_Size referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 704 | :info:build _FT_Set_Transform referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 705 | :info:build _FT_Vector_Transform referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 706 | :info:build _FT_GlyphSlot_Embolden referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 707 | :info:build _FT_Outline_Get_Bitmap referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 708 | :info:build _FT_Outline_Transform referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 709 | :info:build _FT_Outline_Translate referenced from libXft expected to be defined in /opt/local/lib/libfreetype.6.dylib |
|---|
| 710 | :info:build collect2: ld returned 1 exit status |
|---|
| 711 | :info:build lipo: can't open input file: /var/tmp//ccNZ62vr.out (No such file or directory) |
|---|
| 712 | :info:build make[1]: *** [rxvt] Error 1 |
|---|
| 713 | :info:build make: *** [all] Error 1 |
|---|
| 714 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_rxvt-unicode/work/rxvt-unicode-9.10" && /usr/bin/make all " returned error 2 |
|---|
| 715 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 716 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 717 | while executing |
|---|
| 718 | "command_exec build" |
|---|
| 719 | (procedure "portbuild::build_main" line 8) |
|---|
| 720 | invoked from within |
|---|
| 721 | "$procedure $targetname" |
|---|
| 722 | :info:build Warning: the following items did not execute (for rxvt-unicode): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 723 | :notice:build Log for rxvt-unicode is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_rxvt-unicode/main.log |
|---|
