| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main cmake 2.8.4_0 exists in the ports tree |
|---|
| 4 | :debug:main cmake 2.8.4_0 is the latest installed |
|---|
| 5 | :debug:main cmake 2.8.4_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake |
|---|
| 9 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 16 | :debug:main No need to upgrade! cmake 2.8.4_0 >= cmake 2.8.4_0 |
|---|
| 17 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 18 | :debug:main libidn 1.22_0 exists in the ports tree |
|---|
| 19 | :debug:main libidn 1.20_0 is the latest installed |
|---|
| 20 | :debug:main libidn 1.20_0 is active |
|---|
| 21 | :debug:main Merging existing variants '' into variants |
|---|
| 22 | :debug:main new fully merged portvariants: |
|---|
| 23 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn |
|---|
| 24 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 25 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:main adding the default universal variant |
|---|
| 29 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 30 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 31 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 32 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 33 | :debug:main libiconv 1.13.1_0 is active |
|---|
| 34 | :debug:main Merging existing variants '' into variants |
|---|
| 35 | :debug:main new fully merged portvariants: |
|---|
| 36 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 37 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 38 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 42 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 43 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 44 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 45 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 46 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 47 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 48 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 49 | :debug:main Merging existing variants '' into variants |
|---|
| 50 | :debug:main new fully merged portvariants: |
|---|
| 51 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 52 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 53 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 57 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 58 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 59 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 60 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 61 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 62 | :debug:main ncurses 5.9_0 exists in the ports tree |
|---|
| 63 | :debug:main ncurses 5.9_0 is the latest installed |
|---|
| 64 | :debug:main ncurses 5.9_0 is active |
|---|
| 65 | :debug:main Merging existing variants '' into variants |
|---|
| 66 | :debug:main new fully merged portvariants: |
|---|
| 67 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 68 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 69 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 71 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 72 | :debug:main adding the default universal variant |
|---|
| 73 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 74 | :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0 |
|---|
| 75 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 76 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 77 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 78 | :debug:main expat 2.0.1_1 is active |
|---|
| 79 | :debug:main Merging existing variants '' into variants |
|---|
| 80 | :debug:main new fully merged portvariants: |
|---|
| 81 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 82 | :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 83 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 84 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 85 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main adding the default universal variant |
|---|
| 87 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 88 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 89 | :debug:main Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_libidn/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn/work |
|---|
| 90 | :debug:main Starting logging for libidn |
|---|
| 91 | :debug:destroot Starting logging for libidn |
|---|
| 92 | :debug:clean epoch: in tree: 1 installed: 1 |
|---|
| 93 | :debug:clean openssl 1.0.0d_0 exists in the ports tree |
|---|
| 94 | :debug:clean openssl 1.0.0d_0 is the latest installed |
|---|
| 95 | :debug:clean openssl 1.0.0d_0 is active |
|---|
| 96 | :debug:clean Merging existing variants '' into variants |
|---|
| 97 | :debug:clean new fully merged portvariants: |
|---|
| 98 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 99 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 100 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 102 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 103 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 104 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 105 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 106 | :debug:clean No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 |
|---|
| 107 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 108 | :debug:clean zlib 1.2.5_0 exists in the ports tree |
|---|
| 109 | :debug:clean zlib 1.2.5_0 is the latest installed |
|---|
| 110 | :debug:clean zlib 1.2.5_0 is active |
|---|
| 111 | :debug:clean Merging existing variants '' into variants |
|---|
| 112 | :debug:clean new fully merged portvariants: |
|---|
| 113 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 114 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 115 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 116 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 117 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 118 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 119 | :debug:clean adding the default universal variant |
|---|
| 120 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 121 | :debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 122 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 123 | :debug:clean pkgconfig 0.25_2 exists in the ports tree |
|---|
| 124 | :debug:clean pkgconfig 0.25_2 is the latest installed |
|---|
| 125 | :debug:clean pkgconfig 0.25_2 is active |
|---|
| 126 | :debug:clean Merging existing variants '' into variants |
|---|
| 127 | :debug:clean new fully merged portvariants: |
|---|
| 128 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 129 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 130 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 131 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 132 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 133 | :debug:clean adding the default universal variant |
|---|
| 134 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 135 | :debug:clean No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2 |
|---|
| 136 | :debug:clean Found Dependency: path: /opt/local/bin filename: qmake regex: ^qmake$ |
|---|
| 137 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 138 | :debug:clean qt3 3.3.8_10 exists in the ports tree |
|---|
| 139 | :debug:clean qt3 3.3.8_10 is the latest installed |
|---|
| 140 | :debug:clean qt3 3.3.8_10 is active |
|---|
| 141 | :debug:clean Merging existing variants '' into variants |
|---|
| 142 | :debug:clean new fully merged portvariants: |
|---|
| 143 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3 |
|---|
| 144 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 145 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 146 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 147 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 148 | :debug:clean universal_variant is false, so not adding the default universal variant |
|---|
| 149 | :debug:clean No need to upgrade! qt3 3.3.8_10 >= qt3 3.3.8_10 |
|---|
| 150 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 151 | :debug:clean mesa 7.8.2_2 exists in the ports tree |
|---|
| 152 | :debug:clean mesa 7.8.2_2 is the latest installed |
|---|
| 153 | :debug:clean mesa 7.8.2_2 is active |
|---|
| 154 | :debug:clean Merging existing variants '' into variants |
|---|
| 155 | :debug:clean new fully merged portvariants: |
|---|
| 156 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa |
|---|
| 157 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 158 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 159 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 160 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 162 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 163 | :debug:clean No need to upgrade! mesa 7.8.2_2 >= mesa 7.8.2_2 |
|---|
| 164 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 165 | :debug:clean xorg-glproto 1.4.12_0 exists in the ports tree |
|---|
| 166 | :debug:clean xorg-glproto 1.4.12_0 is the latest installed |
|---|
| 167 | :debug:clean xorg-glproto 1.4.12_0 is active |
|---|
| 168 | :debug:clean Merging existing variants '' into variants |
|---|
| 169 | :debug:clean new fully merged portvariants: |
|---|
| 170 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto |
|---|
| 171 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 172 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 173 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 174 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 175 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 176 | :debug:clean No need to upgrade! xorg-glproto 1.4.12_0 >= xorg-glproto 1.4.12_0 |
|---|
| 177 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 178 | :debug:clean xorg-dri2proto 2.3_0 exists in the ports tree |
|---|
| 179 | :debug:clean xorg-dri2proto 2.3_0 is the latest installed |
|---|
| 180 | :debug:clean xorg-dri2proto 2.3_0 is active |
|---|
| 181 | :debug:clean Merging existing variants '' into variants |
|---|
| 182 | :debug:clean new fully merged portvariants: |
|---|
| 183 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto |
|---|
| 184 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 185 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 186 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 187 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 188 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 189 | :debug:clean No need to upgrade! xorg-dri2proto 2.3_0 >= xorg-dri2proto 2.3_0 |
|---|
| 190 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 191 | :debug:clean xorg-libXfixes 5.0_0 exists in the ports tree |
|---|
| 192 | :debug:clean xorg-libXfixes 5.0_0 is the latest installed |
|---|
| 193 | :debug:clean xorg-libXfixes 5.0_0 is active |
|---|
| 194 | :debug:clean Merging existing variants '' into variants |
|---|
| 195 | :debug:clean new fully merged portvariants: |
|---|
| 196 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes |
|---|
| 197 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 198 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 200 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 201 | :debug:clean adding the default universal variant |
|---|
| 202 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 203 | :debug:clean No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0 |
|---|
| 204 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 205 | :debug:clean xorg-libX11 1.4.3_0 exists in the ports tree |
|---|
| 206 | :debug:clean xorg-libX11 1.4.3_0 is the latest installed |
|---|
| 207 | :debug:clean xorg-libX11 1.4.3_0 is active |
|---|
| 208 | :debug:clean Merging existing variants '' into variants |
|---|
| 209 | :debug:clean new fully merged portvariants: |
|---|
| 210 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 211 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 212 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 215 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 216 | :debug:clean adding the default universal variant |
|---|
| 217 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 218 | :debug:clean No need to upgrade! xorg-libX11 1.4.3_0 >= xorg-libX11 1.4.3_0 |
|---|
| 219 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 220 | :debug:clean xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 221 | :debug:clean xorg-libXdmcp 1.1.0_0 is the latest installed |
|---|
| 222 | :debug:clean xorg-libXdmcp 1.1.0_0 is active |
|---|
| 223 | :debug:clean Merging existing variants '' into variants |
|---|
| 224 | :debug:clean new fully merged portvariants: |
|---|
| 225 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 226 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 227 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 228 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 229 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 230 | :debug:clean adding the default universal variant |
|---|
| 231 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 232 | :debug:clean No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 233 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 234 | :debug:clean xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 235 | :debug:clean xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 236 | :debug:clean xorg-libXau 1.0.6_0 is active |
|---|
| 237 | :debug:clean Merging existing variants '' into variants |
|---|
| 238 | :debug:clean new fully merged portvariants: |
|---|
| 239 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 240 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 241 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 242 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 243 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 244 | :debug:clean adding the default universal variant |
|---|
| 245 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 246 | :debug:clean No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 247 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 248 | :debug:clean xorg-xproto 7.0.21_0 exists in the ports tree |
|---|
| 249 | :debug:clean xorg-xproto 7.0.21_0 is the latest installed |
|---|
| 250 | :debug:clean xorg-xproto 7.0.21_0 is active |
|---|
| 251 | :debug:clean Merging existing variants '' into variants |
|---|
| 252 | :debug:clean new fully merged portvariants: |
|---|
| 253 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 254 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 255 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 256 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 257 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 258 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 259 | :debug:clean No need to upgrade! xorg-xproto 7.0.21_0 >= xorg-xproto 7.0.21_0 |
|---|
| 260 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 261 | :debug:clean xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 262 | :debug:clean xorg-libxcb 1.7_0 +python26 is the latest installed |
|---|
| 263 | :debug:clean xorg-libxcb 1.7_0 +python26 is active |
|---|
| 264 | :debug:clean Merging existing variants '+python26' into variants |
|---|
| 265 | :debug:clean new fully merged portvariants: python26 + |
|---|
| 266 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb |
|---|
| 267 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 268 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 269 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 270 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 271 | :debug:clean adding the default universal variant |
|---|
| 272 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 273 | :debug:clean Executing variant python26 provides python26 |
|---|
| 274 | :debug:clean No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 |
|---|
| 275 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 276 | :debug:clean xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 277 | :debug:clean xorg-xcb-proto 1.6_0 +python26 is the latest installed |
|---|
| 278 | :debug:clean xorg-xcb-proto 1.6_0 +python26 is active |
|---|
| 279 | :debug:clean Merging existing variants '+python26' into variants |
|---|
| 280 | :debug:clean new fully merged portvariants: python26 + |
|---|
| 281 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto |
|---|
| 282 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 283 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 284 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 285 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 287 | :debug:clean Executing variant python26 provides python26 |
|---|
| 288 | :debug:clean No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 289 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 290 | :debug:clean libxml2 2.7.8_0 exists in the ports tree |
|---|
| 291 | :debug:clean libxml2 2.7.8_0 is the latest installed |
|---|
| 292 | :debug:clean libxml2 2.7.8_0 is active |
|---|
| 293 | :debug:clean Merging existing variants '' into variants |
|---|
| 294 | :debug:clean new fully merged portvariants: |
|---|
| 295 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 296 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 297 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 298 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 299 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 300 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 301 | :debug:clean adding the default universal variant |
|---|
| 302 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 303 | :debug:clean No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 304 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 305 | :debug:clean python26 2.6.6_2 exists in the ports tree |
|---|
| 306 | :debug:clean python26 2.6.6_2 is the latest installed |
|---|
| 307 | :debug:clean python26 2.6.6_2 is active |
|---|
| 308 | :debug:clean Merging existing variants '' into variants |
|---|
| 309 | :debug:clean new fully merged portvariants: |
|---|
| 310 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 |
|---|
| 311 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 312 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 313 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 314 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 315 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 316 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 317 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 318 | :debug:clean No need to upgrade! python26 2.6.6_2 >= python26 2.6.6_2 |
|---|
| 319 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 320 | :debug:clean sqlite3 3.7.6_0 exists in the ports tree |
|---|
| 321 | :debug:clean sqlite3 3.7.6_0 is the latest installed |
|---|
| 322 | :debug:clean sqlite3 3.7.6_0 is active |
|---|
| 323 | :debug:clean Merging existing variants '' into variants |
|---|
| 324 | :debug:clean new fully merged portvariants: |
|---|
| 325 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 326 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 327 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 328 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 329 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | :debug:clean adding the default universal variant |
|---|
| 331 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 332 | :debug:clean No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0 |
|---|
| 333 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 334 | :debug:clean readline 6.2.000_0 exists in the ports tree |
|---|
| 335 | :debug:clean readline 6.2.000_0 is the latest installed |
|---|
| 336 | :debug:clean readline 6.2.000_0 is active |
|---|
| 337 | :debug:clean Merging existing variants '' into variants |
|---|
| 338 | :debug:clean new fully merged portvariants: |
|---|
| 339 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 340 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 341 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 342 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 343 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 344 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 345 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 346 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 347 | :debug:clean No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 348 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 349 | :debug:clean db46 4.6.21_6 exists in the ports tree |
|---|
| 350 | :debug:clean db46 4.6.21_6 is the latest installed |
|---|
| 351 | :debug:clean db46 4.6.21_6 is active |
|---|
| 352 | :debug:clean Merging existing variants '' into variants |
|---|
| 353 | :debug:clean new fully merged portvariants: |
|---|
| 354 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 355 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 356 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 357 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 358 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 359 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 360 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 361 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 362 | :debug:clean No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 363 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 364 | :debug:clean gdbm 1.8.3_3 exists in the ports tree |
|---|
| 365 | :debug:clean gdbm 1.8.3_3 is the latest installed |
|---|
| 366 | :debug:clean gdbm 1.8.3_3 is active |
|---|
| 367 | :debug:clean Merging existing variants '' into variants |
|---|
| 368 | :debug:clean new fully merged portvariants: |
|---|
| 369 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 370 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 371 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 372 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 373 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 374 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 375 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 376 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 377 | :debug:clean No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 |
|---|
| 378 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 379 | :debug:clean bzip2 1.0.6_0 exists in the ports tree |
|---|
| 380 | :debug:clean bzip2 1.0.6_0 is the latest installed |
|---|
| 381 | :debug:clean bzip2 1.0.6_0 is active |
|---|
| 382 | :debug:clean Merging existing variants '' into variants |
|---|
| 383 | :debug:clean new fully merged portvariants: |
|---|
| 384 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 385 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 386 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 387 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 388 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 389 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 390 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 391 | :debug:clean No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 392 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 393 | :debug:clean xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 394 | :debug:clean xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 395 | :debug:clean xorg-libpthread-stubs 0.3_0 is active |
|---|
| 396 | :debug:clean Merging existing variants '' into variants |
|---|
| 397 | :debug:clean new fully merged portvariants: |
|---|
| 398 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 399 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 400 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 401 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 402 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 403 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 404 | :debug:clean No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 405 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 406 | :debug:clean xorg-kbproto 1.0.5_0 exists in the ports tree |
|---|
| 407 | :debug:clean xorg-kbproto 1.0.5_0 is the latest installed |
|---|
| 408 | :debug:clean xorg-kbproto 1.0.5_0 is active |
|---|
| 409 | :debug:clean Merging existing variants '' into variants |
|---|
| 410 | :debug:clean new fully merged portvariants: |
|---|
| 411 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 412 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 413 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 414 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 415 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 416 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 417 | :debug:clean No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 |
|---|
| 418 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 419 | :debug:clean xorg-fixesproto 5.0_0 exists in the ports tree |
|---|
| 420 | :debug:clean xorg-fixesproto 5.0_0 is the latest installed |
|---|
| 421 | :debug:clean xorg-fixesproto 5.0_0 is active |
|---|
| 422 | :debug:clean Merging existing variants '' into variants |
|---|
| 423 | :debug:clean new fully merged portvariants: |
|---|
| 424 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto |
|---|
| 425 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 426 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 427 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 428 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 429 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 430 | :debug:clean No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 |
|---|
| 431 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 432 | :debug:clean xorg-libXi 1.4.1_0 exists in the ports tree |
|---|
| 433 | :debug:clean xorg-libXi 1.4.1_0 is the latest installed |
|---|
| 434 | :debug:clean xorg-libXi 1.4.1_0 is active |
|---|
| 435 | :debug:clean Merging existing variants '' into variants |
|---|
| 436 | :debug:clean new fully merged portvariants: |
|---|
| 437 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi |
|---|
| 438 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 439 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 440 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 441 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 442 | :debug:clean adding the default universal variant |
|---|
| 443 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 444 | :debug:clean No need to upgrade! xorg-libXi 1.4.1_0 >= xorg-libXi 1.4.1_0 |
|---|
| 445 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 446 | :debug:clean xorg-libXext 1.2.0_0 exists in the ports tree |
|---|
| 447 | :debug:clean xorg-libXext 1.2.0_0 is the latest installed |
|---|
| 448 | :debug:clean xorg-libXext 1.2.0_0 is active |
|---|
| 449 | :debug:clean Merging existing variants '' into variants |
|---|
| 450 | :debug:clean new fully merged portvariants: |
|---|
| 451 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 452 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 453 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 454 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 455 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 456 | :debug:clean adding the default universal variant |
|---|
| 457 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 458 | :debug:clean No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext 1.2.0_0 |
|---|
| 459 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 460 | :debug:clean xorg-xextproto 7.2.0_0 exists in the ports tree |
|---|
| 461 | :debug:clean xorg-xextproto 7.2.0_0 is the latest installed |
|---|
| 462 | :debug:clean xorg-xextproto 7.2.0_0 is active |
|---|
| 463 | :debug:clean Merging existing variants '' into variants |
|---|
| 464 | :debug:clean new fully merged portvariants: |
|---|
| 465 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 466 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 467 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 468 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 469 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 470 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 471 | :debug:clean No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 |
|---|
| 472 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 473 | :debug:clean xorg-inputproto 2.0.1_0 exists in the ports tree |
|---|
| 474 | :debug:clean xorg-inputproto 2.0.1_0 is the latest installed |
|---|
| 475 | :debug:clean xorg-inputproto 2.0.1_0 is active |
|---|
| 476 | :debug:clean Merging existing variants '' into variants |
|---|
| 477 | :debug:clean new fully merged portvariants: |
|---|
| 478 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 479 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 480 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 481 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 482 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 483 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 484 | :debug:clean No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto 2.0.1_0 |
|---|
| 485 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 486 | :debug:clean xorg-libXmu 1.1.0_0 exists in the ports tree |
|---|
| 487 | :debug:clean xorg-libXmu 1.1.0_0 is the latest installed |
|---|
| 488 | :debug:clean xorg-libXmu 1.1.0_0 is active |
|---|
| 489 | :debug:clean Merging existing variants '' into variants |
|---|
| 490 | :debug:clean new fully merged portvariants: |
|---|
| 491 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
|---|
| 492 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 493 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 494 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 495 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 496 | :debug:clean adding the default universal variant |
|---|
| 497 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 498 | :debug:clean No need to upgrade! xorg-libXmu 1.1.0_0 >= xorg-libXmu 1.1.0_0 |
|---|
| 499 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 500 | :debug:clean xorg-libXt 1.1.1_0 exists in the ports tree |
|---|
| 501 | :debug:clean xorg-libXt 1.1.1_0 is the latest installed |
|---|
| 502 | :debug:clean xorg-libXt 1.1.1_0 is active |
|---|
| 503 | :debug:clean Merging existing variants '' into variants |
|---|
| 504 | :debug:clean new fully merged portvariants: |
|---|
| 505 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
|---|
| 506 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 507 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 508 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 509 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 510 | :debug:clean adding the default universal variant |
|---|
| 511 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 512 | :debug:clean No need to upgrade! xorg-libXt 1.1.1_0 >= xorg-libXt 1.1.1_0 |
|---|
| 513 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 514 | :debug:clean xorg-libsm 1.2.0_0 exists in the ports tree |
|---|
| 515 | :debug:clean xorg-libsm 1.2.0_0 is the latest installed |
|---|
| 516 | :debug:clean xorg-libsm 1.2.0_0 is active |
|---|
| 517 | :debug:clean Merging existing variants '' into variants |
|---|
| 518 | :debug:clean new fully merged portvariants: |
|---|
| 519 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
|---|
| 520 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 521 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 522 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 523 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 524 | :debug:clean adding the default universal variant |
|---|
| 525 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 526 | :debug:clean No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0 |
|---|
| 527 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 528 | :debug:clean xorg-libice 1.0.7_0 exists in the ports tree |
|---|
| 529 | :debug:clean xorg-libice 1.0.7_0 is the latest installed |
|---|
| 530 | :debug:clean xorg-libice 1.0.7_0 is active |
|---|
| 531 | :debug:clean Merging existing variants '' into variants |
|---|
| 532 | :debug:clean new fully merged portvariants: |
|---|
| 533 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
|---|
| 534 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 535 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 536 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 537 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 538 | :debug:clean adding the default universal variant |
|---|
| 539 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 540 | :debug:clean No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0 |
|---|
| 541 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 542 | :debug:clean jpeg 8c_0 exists in the ports tree |
|---|
| 543 | :debug:clean jpeg 8c_0 is the latest installed |
|---|
| 544 | :debug:clean jpeg 8c_0 is active |
|---|
| 545 | :debug:clean Merging existing variants '' into variants |
|---|
| 546 | :debug:clean new fully merged portvariants: |
|---|
| 547 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 548 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 549 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 550 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 551 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 552 | :debug:clean adding the default universal variant |
|---|
| 553 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 554 | :debug:clean No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 |
|---|
| 555 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 556 | :debug:clean libpng 1.4.7_0 exists in the ports tree |
|---|
| 557 | :debug:clean libpng 1.4.7_0 is the latest installed |
|---|
| 558 | :debug:clean libpng 1.4.7_0 is active |
|---|
| 559 | :debug:clean Merging existing variants '' into variants |
|---|
| 560 | :debug:clean new fully merged portvariants: |
|---|
| 561 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 562 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 563 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 564 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 565 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 566 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 567 | :debug:clean adding the default universal variant |
|---|
| 568 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 569 | :debug:clean No need to upgrade! libpng 1.4.7_0 >= libpng 1.4.7_0 |
|---|
| 570 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 571 | :debug:clean perl5 5.12.3_1 exists in the ports tree |
|---|
| 572 | :debug:clean perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 573 | :debug:clean perl5 5.12.3_1 +perl5_12 is active |
|---|
| 574 | :debug:clean Merging existing variants '+perl5_12' into variants |
|---|
| 575 | :debug:clean new fully merged portvariants: perl5_12 + |
|---|
| 576 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 577 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 578 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 579 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 580 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 581 | :debug:clean universal_variant is false, so not adding the default universal variant |
|---|
| 582 | :debug:clean Executing variant perl5_12 provides perl5_12 |
|---|
| 583 | :debug:clean No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 584 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 585 | :debug:clean perl5.12 5.12.3_1 exists in the ports tree |
|---|
| 586 | :debug:clean perl5.12 5.12.3_1 is the latest installed |
|---|
| 587 | :debug:clean perl5.12 5.12.3_1 is active |
|---|
| 588 | :debug:clean Merging existing variants '' into variants |
|---|
| 589 | :debug:clean new fully merged portvariants: |
|---|
| 590 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 |
|---|
| 591 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 592 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 593 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 594 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 595 | :debug:clean adding the default universal variant |
|---|
| 596 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 597 | :debug:clean No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 |
|---|
| 598 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 599 | :debug:clean Xft2 2.2.0_0 exists in the ports tree |
|---|
| 600 | :debug:clean Xft2 2.2.0_0 is the latest installed |
|---|
| 601 | :debug:clean Xft2 2.2.0_0 is active |
|---|
| 602 | :debug:clean Merging existing variants '' into variants |
|---|
| 603 | :debug:clean new fully merged portvariants: |
|---|
| 604 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 605 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 606 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 607 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 608 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 609 | :debug:clean adding the default universal variant |
|---|
| 610 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 611 | :debug:clean No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 |
|---|
| 612 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 613 | :debug:clean xrender 0.9.6_0 exists in the ports tree |
|---|
| 614 | :debug:clean xrender 0.9.6_0 is the latest installed |
|---|
| 615 | :debug:clean xrender 0.9.6_0 is active |
|---|
| 616 | :debug:clean Merging existing variants '' into variants |
|---|
| 617 | :debug:clean new fully merged portvariants: |
|---|
| 618 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 619 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 620 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 621 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 622 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 623 | :debug:clean adding the default universal variant |
|---|
| 624 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 625 | :debug:clean No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 |
|---|
| 626 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 627 | :debug:clean xorg-renderproto 0.11.1_0 exists in the ports tree |
|---|
| 628 | :debug:clean xorg-renderproto 0.11.1_0 is the latest installed |
|---|
| 629 | :debug:clean xorg-renderproto 0.11.1_0 is active |
|---|
| 630 | :debug:clean Merging existing variants '' into variants |
|---|
| 631 | :debug:clean new fully merged portvariants: |
|---|
| 632 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 633 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 634 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 635 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 636 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 637 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 638 | :debug:clean No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 |
|---|
| 639 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 640 | :debug:clean freetype 2.4.4_0 exists in the ports tree |
|---|
| 641 | :debug:clean freetype 2.4.4_0 is the latest installed |
|---|
| 642 | :debug:clean freetype 2.4.4_0 is active |
|---|
| 643 | :debug:clean Merging existing variants '' into variants |
|---|
| 644 | :debug:clean new fully merged portvariants: |
|---|
| 645 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 646 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 647 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 648 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 649 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 650 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 651 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 652 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 653 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 654 | :debug:clean No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0 |
|---|
| 655 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 656 | :debug:clean fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 657 | :debug:clean fontconfig 2.8.0_0 is the latest installed |
|---|
| 658 | :debug:clean fontconfig 2.8.0_0 is active |
|---|
| 659 | :debug:clean Merging existing variants '' into variants |
|---|
| 660 | :debug:clean new fully merged portvariants: |
|---|
| 661 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 662 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 663 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 664 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 665 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 666 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 667 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 668 | :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 669 | :debug:clean universal variant already exists, so not adding the default one |
|---|
| 670 | :debug:clean No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 671 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 672 | :debug:clean xorg-libXcursor 1.1.11_0 exists in the ports tree |
|---|
| 673 | :debug:clean xorg-libXcursor 1.1.11_0 is the latest installed |
|---|
| 674 | :debug:clean xorg-libXcursor 1.1.11_0 is active |
|---|
| 675 | :debug:clean Merging existing variants '' into variants |
|---|
| 676 | :debug:clean new fully merged portvariants: |
|---|
| 677 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor |
|---|
| 678 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 679 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 680 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 681 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 682 | :debug:clean adding the default universal variant |
|---|
| 683 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 684 | :debug:clean No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-libXcursor 1.1.11_0 |
|---|
| 685 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 686 | :debug:clean xorg-libXinerama 1.1.1_0 exists in the ports tree |
|---|
| 687 | :debug:clean xorg-libXinerama 1.1.1_0 is the latest installed |
|---|
| 688 | :debug:clean xorg-libXinerama 1.1.1_0 is active |
|---|
| 689 | :debug:clean Merging existing variants '' into variants |
|---|
| 690 | :debug:clean new fully merged portvariants: |
|---|
| 691 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama |
|---|
| 692 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 693 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 694 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 695 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 696 | :debug:clean adding the default universal variant |
|---|
| 697 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 698 | :debug:clean No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0 |
|---|
| 699 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 700 | :debug:clean xorg-xineramaproto 1.2.1_0 exists in the ports tree |
|---|
| 701 | :debug:clean xorg-xineramaproto 1.2.1_0 is the latest installed |
|---|
| 702 | :debug:clean xorg-xineramaproto 1.2.1_0 is active |
|---|
| 703 | :debug:clean Merging existing variants '' into variants |
|---|
| 704 | :debug:clean new fully merged portvariants: |
|---|
| 705 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto |
|---|
| 706 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 707 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 708 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 709 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 710 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 711 | :debug:clean No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0 |
|---|
| 712 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 713 | :debug:clean xorg-libXrandr 1.3.1_0 exists in the ports tree |
|---|
| 714 | :debug:clean xorg-libXrandr 1.3.1_0 is the latest installed |
|---|
| 715 | :debug:clean xorg-libXrandr 1.3.1_0 is active |
|---|
| 716 | :debug:clean Merging existing variants '' into variants |
|---|
| 717 | :debug:clean new fully merged portvariants: |
|---|
| 718 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr |
|---|
| 719 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 720 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 721 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 722 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 723 | :debug:clean adding the default universal variant |
|---|
| 724 | :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 725 | :debug:clean No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr 1.3.1_0 |
|---|
| 726 | :debug:clean epoch: in tree: 0 installed: 0 |
|---|
| 727 | :debug:clean xorg-randrproto 1.3.2_0 exists in the ports tree |
|---|
| 728 | :debug:clean xorg-randrproto 1.3.2_0 is the latest installed |
|---|
| 729 | :debug:clean xorg-randrproto 1.3.2_0 is active |
|---|
| 730 | :debug:clean Merging existing variants '' into variants |
|---|
| 731 | :debug:clean new fully merged portvariants: |
|---|
| 732 | :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto |
|---|
| 733 | :debug:clean OS darwin/10.7.0 (Mac OS X 10.6) arch i386 |
|---|
| 734 | :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 735 | :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 736 | :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 737 | :debug:clean only one arch supported, so not adding the default universal variant |
|---|
| 738 | :debug:clean No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0 |
|---|
| 739 | :msg:clean ---> Computing dependencies for qfsm:info:clean .:debug:clean Searching for dependency: cmake |
|---|
| 740 | :debug:clean Found Dependency: receipt exists for cmake |
|---|
| 741 | :debug:clean Searching for dependency: pkgconfig |
|---|
| 742 | :debug:clean Found Dependency: receipt exists for pkgconfig |
|---|
| 743 | :debug:clean Searching for dependency: qt4-mac |
|---|
| 744 | :debug:clean Didn't find receipt, going to depspec regex for: qt4-mac |
|---|
| 745 | :debug:clean Found Dependency: path: /opt/local/bin filename: qmake regex: ^qmake$ |
|---|
| 746 | :debug:clean Found Dependency: path: /opt/local/bin filename: qmake regex: ^qmake$ |
|---|
| 747 | :msg:clean |
|---|
| 748 | :debug:main Executing org.macports.main (qfsm) |
|---|
| 749 | :debug:main Skipping completed org.macports.fetch (qfsm) |
|---|
| 750 | :debug:main Skipping completed org.macports.checksum (qfsm) |
|---|
| 751 | :debug:main setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 752 | :debug:main Skipping completed org.macports.extract (qfsm) |
|---|
| 753 | :debug:main Skipping completed org.macports.patch (qfsm) |
|---|
| 754 | :msg:main ---> Configuring qfsm |
|---|
| 755 | :debug:main Using compiler 'Mac OS X gcc 4.2' |
|---|
| 756 | :debug:configure configure phase started at Thu May 12 12:57:12 CEST 2011 |
|---|
| 757 | :debug:configure Executing proc-pre-org.macports.configure-configure-0 |
|---|
| 758 | :debug:configure Executing org.macports.configure (qfsm) |
|---|
| 759 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_qfsm/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' MOC='/opt/local/bin/moc' FFLAGS='-pipe -O2 -m64' OBJCFLAGS='-pipe -O2 -arch x86_64' QTDIR='/opt/local' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' QMAKE='/opt/local/bin/qmake' |
|---|
| 760 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_qfsm/work/qfsm-0.52.0-Source" && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev -DQT_QT_INCLUDE_DIR=/opt/local/include -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib -DCMAKE_OSX_ARCHITECTURES="x86_64"' |
|---|
| 761 | :info:configure CMake Error at /opt/local/share/cmake-2.8/Modules/FindQt4.cmake:1227 (MESSAGE): |
|---|
| 762 | :info:configure Qt qmake not found! |
|---|
| 763 | :info:configure Call Stack (most recent call first): |
|---|
| 764 | :info:configure CMakeLists.txt:26 (FIND_PACKAGE) |
|---|
| 765 | :info:configure |
|---|
| 766 | :info:configure |
|---|
| 767 | :info:configure -- Configuring incomplete, errors occurred! |
|---|
| 768 | :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_qfsm/work/qfsm-0.52.0-Source" && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev -DQT_QT_INCLUDE_DIR=/opt/local/include -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib -DCMAKE_OSX_ARCHITECTURES="x86_64" " returned error 1 |
|---|
| 769 | :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) |
|---|
| 770 | :debug:configure Backtrace: configure failure: shell command failed (see log for details) |
|---|
| 771 | while executing |
|---|
| 772 | "$procedure $targetname" |
|---|
| 773 | :info:configure Warning: the following items did not execute (for qfsm): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 774 | :notice:configure Log for qfsm is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_qfsm/main.log |
|---|
