| 1 | # -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:et:sw=4:ts=4:sts=4 |
|---|
| 2 | # $Id: Portfile 78774 2011-05-21 20:24:05Z ryandesign@macports.org $ |
|---|
| 3 | |
|---|
| 4 | PortSystem 1.0 |
|---|
| 5 | |
|---|
| 6 | name octave-devel |
|---|
| 7 | version 3.4.2 |
|---|
| 8 | conflicts octave |
|---|
| 9 | categories math science |
|---|
| 10 | maintainers michaelld openmaintainer |
|---|
| 11 | platforms darwin |
|---|
| 12 | description a Matlab-like environment for numerical analysis |
|---|
| 13 | long_description Octave provides a convenient command line interface \ |
|---|
| 14 | for solving linear and nonlinear problems numerically, \ |
|---|
| 15 | using a language that is mostly compatible with Matlab. \ |
|---|
| 16 | It is easily extensible and customizable via \ |
|---|
| 17 | user-defined functions or using dynamically loaded \ |
|---|
| 18 | modules written in e.g. C++, C or Fortran. |
|---|
| 19 | |
|---|
| 20 | homepage http://www.gnu.org/software/octave/ |
|---|
| 21 | master_sites gnu:octave |
|---|
| 22 | dist_subdir octave |
|---|
| 23 | distname octave-${version} |
|---|
| 24 | use_bzip2 yes |
|---|
| 25 | |
|---|
| 26 | checksums md5 31c744ab4555a2bf04d5e644b93f9b51 \ |
|---|
| 27 | sha1 12cac29ef7d1ab8374980e1e2fd14637b2f15ba5 \ |
|---|
| 28 | rmd160 ad2222ad0b3e0f1dd6db1ff8ca93c0666b95e3a0 |
|---|
| 29 | |
|---|
| 30 | depends_build port:bison \ |
|---|
| 31 | port:flex \ |
|---|
| 32 | port:gawk \ |
|---|
| 33 | port:gperf \ |
|---|
| 34 | port:gsed \ |
|---|
| 35 | path:bin/perl:perl5 \ |
|---|
| 36 | port:texinfo |
|---|
| 37 | |
|---|
| 38 | depends_lib port:arpack \ |
|---|
| 39 | port:atlas \ |
|---|
| 40 | port:curl \ |
|---|
| 41 | port:fftw-3 \ |
|---|
| 42 | port:fftw-3-single \ |
|---|
| 43 | port:ftgl \ |
|---|
| 44 | port:ghostscript \ |
|---|
| 45 | port:glpk \ |
|---|
| 46 | port:GraphicsMagick \ |
|---|
| 47 | port:gnuplot \ |
|---|
| 48 | port:hdf5-18 \ |
|---|
| 49 | port:less \ |
|---|
| 50 | port:metis \ |
|---|
| 51 | port:ncurses \ |
|---|
| 52 | port:pcre \ |
|---|
| 53 | port:readline \ |
|---|
| 54 | port:qhull \ |
|---|
| 55 | port:qrupdate \ |
|---|
| 56 | port:SuiteSparse \ |
|---|
| 57 | port:fltk-devel |
|---|
| 58 | |
|---|
| 59 | # allow non-Apple compilers to work with FLTK by removing the -arch |
|---|
| 60 | # flag, which means this port cannot easy compile as universal. |
|---|
| 61 | # patchfiles-append patch-configure.diff |
|---|
| 62 | |
|---|
| 63 | universal_variant no |
|---|
| 64 | |
|---|
| 65 | configure.args --without-x \ |
|---|
| 66 | --disable-docs |
|---|
| 67 | |
|---|
| 68 | # do not build static libraries; just shared |
|---|
| 69 | # --enable-static |
|---|
| 70 | |
|---|
| 71 | ### the following are probably not necessary (except possibly the |
|---|
| 72 | ### 'cholmod' one), but are included for completion. Ordering is the |
|---|
| 73 | ### same as in './configure --help'. |
|---|
| 74 | configure.args-append \ |
|---|
| 75 | --with-cholmod="-lcholmod -lmetis" |
|---|
| 76 | |
|---|
| 77 | ### the following are probably not necessary, but are included for |
|---|
| 78 | ### completion. |
|---|
| 79 | # octave uses a number of other ports to create sources from template: |
|---|
| 80 | # perl, gawk, gsed, flex, bison, texinfo. python is not used if perl |
|---|
| 81 | # is available, so clear it out. FLTK doesn't work as of 1.3.x-r7794, |
|---|
| 82 | # so disable it entirely (via "no" here and a configure patch). |
|---|
| 83 | #configure.perl ${prefix}/bin/perl |
|---|
| 84 | #configure.python ' ' |
|---|
| 85 | #configure.awk ${prefix}/bin/gawk |
|---|
| 86 | #configure.env-append FLTK_CONFIG=no |
|---|
| 87 | #configure.cppflags |
|---|
| 88 | #configure.ldflags |
|---|
| 89 | |
|---|
| 90 | test.run yes |
|---|
| 91 | test.target check |
|---|
| 92 | |
|---|
| 93 | variant gcc43 description {build with the macports gcc43 toolchain} conflicts gcc45 gcc44 g95 {} |
|---|
| 94 | |
|---|
| 95 | variant gcc44 description {build with the macports gcc44 toolchain} conflicts gcc45 gcc43 g95 {} |
|---|
| 96 | |
|---|
| 97 | variant gcc45 description {build with the macports gcc45 toolchain} conflicts gcc44 gcc43 g95 {} |
|---|
| 98 | |
|---|
| 99 | variant g95 description {build with g95} conflicts gcc43 gcc44 gcc45 { |
|---|
| 100 | depends_build-append port:g95 |
|---|
| 101 | configure.f77 "${prefix}/bin/g95" |
|---|
| 102 | } |
|---|
| 103 | |
|---|
| 104 | # check for default variant |
|---|
| 105 | if { ![variant_isset gcc43] && ![variant_isset gcc44] && \ |
|---|
| 106 | ![variant_isset gcc45] && ![variant_isset g95] } { |
|---|
| 107 | # default_variants +gcc44 |
|---|
| 108 | default_variants +gcc45 |
|---|
| 109 | } |
|---|
| 110 | |
|---|
| 111 | # check for just -gcc44 |
|---|
| 112 | if { ![variant_isset gcc43] && ![variant_isset gcc44] && \ |
|---|
| 113 | ![variant_isset gcc45] && ![variant_isset g95] } { |
|---|
| 114 | error "You cannot use the variant -gcc44 alone." |
|---|
| 115 | } |
|---|
| 116 | |
|---|
| 117 | set gcc_version "" |
|---|
| 118 | if {[variant_isset gcc43]} { |
|---|
| 119 | set gcc_version "4.3" |
|---|
| 120 | } elseif {[variant_isset gcc44]} { |
|---|
| 121 | set gcc_version "4.4" |
|---|
| 122 | } elseif {[variant_isset gcc45]} { |
|---|
| 123 | set gcc_version "4.5" |
|---|
| 124 | } |
|---|
| 125 | |
|---|
| 126 | if {${gcc_version} != ""} { |
|---|
| 127 | set gcc_version_join [join [split ${gcc_version} "."] ""] |
|---|
| 128 | configure.ldflags "${prefix}/lib/gcc${gcc_version_join}/libstdc++.6.dylib" |
|---|
| 129 | depends_build-append port:gcc${gcc_version_join} |
|---|
| 130 | configure.compiler macports-gcc-${gcc_version} |
|---|
| 131 | } |
|---|
| 132 | |
|---|
| 133 | variant docs description {Enable creation and installation of documentation} { |
|---|
| 134 | configure.args-replace s|--disable-docs|--enable-docs| |
|---|
| 135 | } |
|---|
| 136 | |
|---|
| 137 | variant x11 description {Enable use of X11} { |
|---|
| 138 | configure.args-replace s|--without-x|--with-x| |
|---|
| 139 | configure.args-append --x-includes=${prefix} |
|---|
| 140 | } |
|---|
| 141 | |
|---|
| 142 | #variant debug description {Produce debugging information in compiled code} { |
|---|
| 143 | # configure.cflags-delete -O2 |
|---|
| 144 | # configure.cxxflags-delete -O2 |
|---|
| 145 | # configure.fflags-delete -O2 |
|---|
| 146 | # configure.fcflags-delete -O2 |
|---|
| 147 | # configure.f90flags-delete -O2 |
|---|
| 148 | # configure.objcflags-delete -O2 |
|---|
| 149 | # configure.cflags-append -g3 -O0 |
|---|
| 150 | # configure.cxxflags-append -g3 -O0 |
|---|
| 151 | # configure.fcflags-append -g3 -O0 |
|---|
| 152 | # configure.f90flags-append -g3 -O0 |
|---|
| 153 | # configure.fflags-append -g3 -O0 |
|---|
| 154 | # configure.objcflags-append -g3 -O0 |
|---|
| 155 | #} |
|---|
| 156 | |
|---|
| 157 | #variant fltk description {Include FLTK option} { |
|---|
| 158 | # depends_lib-append port:fltk-devel |
|---|
| 159 | # post-patch { |
|---|
| 160 | # # fix use of #include Fl -> FL |
|---|
| 161 | # reinplace "/include/s,Fl/,FL/,g" |
|---|
| 162 | # ${worksrcpath}/src/DLD-FUNCTIONS/__init_fltk__.cc |
|---|
| 163 | # } |
|---|
| 164 | #} |
|---|
| 165 | |
|---|
| 166 | #if {![variant_isset fltk]} { |
|---|
| 167 | # configure.env-append FLTK_CONFIG=no |
|---|
| 168 | #} |
|---|
| 169 | |
|---|
| 170 | livecheck.type regex |
|---|
| 171 | livecheck.url http://www.gnu.org/software/octave/news.html |
|---|
| 172 | livecheck.regex Version (\\d+(\\.\\d+)*) |
|---|
