| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main intltool 0.40.6_1 exists in the ports tree |
|---|
| 4 | :debug:main intltool 0.40.6_1 is the latest installed |
|---|
| 5 | :debug:main intltool 0.40.6_1 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool |
|---|
| 9 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 14 | :debug:main No need to upgrade! intltool 0.40.6_1 >= intltool 0.40.6_1 |
|---|
| 15 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 16 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 17 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 18 | :debug:main expat 2.0.1_1 is active |
|---|
| 19 | :debug:main Merging existing variants '' into variants |
|---|
| 20 | :debug:main new fully merged portvariants: |
|---|
| 21 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat |
|---|
| 22 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 23 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 24 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main adding the default universal variant |
|---|
| 27 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 28 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 29 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 30 | :debug:main perl5.12 5.12.3_1 exists in the ports tree |
|---|
| 31 | :debug:main perl5.12 5.12.3_1 is the latest installed |
|---|
| 32 | :debug:main perl5.12 5.12.3_1 is active |
|---|
| 33 | :debug:main Merging existing variants '' into variants |
|---|
| 34 | :debug:main new fully merged portvariants: |
|---|
| 35 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 |
|---|
| 36 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 37 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 38 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main adding the default universal variant |
|---|
| 41 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 42 | :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 |
|---|
| 43 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 44 | :debug:main p5.12-xml-parser 2.400.0_2 exists in the ports tree |
|---|
| 45 | :debug:main p5.12-xml-parser 2.400.0_2 is the latest installed |
|---|
| 46 | :debug:main p5.12-xml-parser 2.400.0_2 is active |
|---|
| 47 | :debug:main Merging existing variants '' into variants |
|---|
| 48 | :debug:main new fully merged portvariants: |
|---|
| 49 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-xml-parser |
|---|
| 50 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 51 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 52 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 53 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 55 | :debug:main Re-registering default for livecheck.version |
|---|
| 56 | :debug:main Re-registering default for configure.universal_args |
|---|
| 57 | :debug:main adding the default universal variant |
|---|
| 58 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 59 | :debug:main No need to upgrade! p5.12-xml-parser 2.400.0_2 >= p5.12-xml-parser 2.400.0_2 |
|---|
| 60 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 61 | :debug:main p5.12-getopt-long 2.380.0_2 exists in the ports tree |
|---|
| 62 | :debug:main p5.12-getopt-long 2.380.0_2 is the latest installed |
|---|
| 63 | :debug:main p5.12-getopt-long 2.380.0_2 is active |
|---|
| 64 | :debug:main Merging existing variants '' into variants |
|---|
| 65 | :debug:main new fully merged portvariants: |
|---|
| 66 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-getopt-long |
|---|
| 67 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 68 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 69 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 71 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 72 | :debug:main Re-registering default for livecheck.version |
|---|
| 73 | :debug:main Re-registering default for configure.universal_args |
|---|
| 74 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 75 | :debug:main No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12-getopt-long 2.380.0_2 |
|---|
| 76 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 77 | :debug:main p5.12-pathtools 3.330.0_2 exists in the ports tree |
|---|
| 78 | :debug:main p5.12-pathtools 3.330.0_2 is the latest installed |
|---|
| 79 | :debug:main p5.12-pathtools 3.330.0_2 is active |
|---|
| 80 | :debug:main Merging existing variants '' into variants |
|---|
| 81 | :debug:main new fully merged portvariants: |
|---|
| 82 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools |
|---|
| 83 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 84 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 85 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 87 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 88 | :debug:main Re-registering default for livecheck.version |
|---|
| 89 | :debug:main Re-registering default for configure.universal_args |
|---|
| 90 | :debug:main adding the default universal variant |
|---|
| 91 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 92 | :debug:main No need to upgrade! p5.12-pathtools 3.330.0_2 >= p5.12-pathtools 3.330.0_2 |
|---|
| 93 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 94 | :debug:main p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree |
|---|
| 95 | :debug:main p5.12-scalar-list-utils 1.230.0_2 is the latest installed |
|---|
| 96 | :debug:main p5.12-scalar-list-utils 1.230.0_2 is active |
|---|
| 97 | :debug:main Merging existing variants '' into variants |
|---|
| 98 | :debug:main new fully merged portvariants: |
|---|
| 99 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-scalar-list-utils |
|---|
| 100 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 101 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 102 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 103 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 104 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 105 | :debug:main Re-registering default for livecheck.version |
|---|
| 106 | :debug:main Re-registering default for configure.universal_args |
|---|
| 107 | :debug:main adding the default universal variant |
|---|
| 108 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 109 | :debug:main No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >= p5.12-scalar-list-utils 1.230.0_2 |
|---|
| 110 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 111 | :debug:main gtk2 2.24.5_0 exists in the ports tree |
|---|
| 112 | :debug:main gtk2 2.24.5_0 +x11 is the latest installed |
|---|
| 113 | :debug:main gtk2 2.24.5_0 +x11 is active |
|---|
| 114 | :debug:main Merging existing variants '+x11' into variants |
|---|
| 115 | :debug:main new fully merged portvariants: x11 + |
|---|
| 116 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2 |
|---|
| 117 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 118 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 119 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 122 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 123 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 124 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 125 | :debug:main Executing variant x11 provides x11 |
|---|
| 126 | :debug:main No need to upgrade! gtk2 2.24.5_0 >= gtk2 2.24.5_0 |
|---|
| 127 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 128 | :debug:main atk 1.32.0_0 exists in the ports tree |
|---|
| 129 | :debug:main atk 1.32.0_0 is the latest installed |
|---|
| 130 | :debug:main atk 1.32.0_0 is active |
|---|
| 131 | :debug:main Merging existing variants '' into variants |
|---|
| 132 | :debug:main new fully merged portvariants: |
|---|
| 133 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk |
|---|
| 134 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 135 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 136 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 137 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 138 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 139 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 140 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 141 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 142 | :debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0 |
|---|
| 143 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 144 | :debug:main glib2 2.28.8_0 exists in the ports tree |
|---|
| 145 | :debug:main glib2 2.28.8_0 is the latest installed |
|---|
| 146 | :debug:main glib2 2.28.8_0 is active |
|---|
| 147 | :debug:main Merging existing variants '' into variants |
|---|
| 148 | :debug:main new fully merged portvariants: |
|---|
| 149 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2 |
|---|
| 150 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 151 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 152 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 153 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 154 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 155 | :debug:main adding the default universal variant |
|---|
| 156 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 157 | :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 |
|---|
| 158 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 159 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 160 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 161 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 162 | :debug:main Merging existing variants '' into variants |
|---|
| 163 | :debug:main new fully merged portvariants: |
|---|
| 164 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext |
|---|
| 165 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 166 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 169 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 170 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 171 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 172 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 173 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 174 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 175 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 176 | :debug:main libiconv 1.14_0 is the latest installed |
|---|
| 177 | :debug:main libiconv 1.14_0 is active |
|---|
| 178 | :debug:main Merging existing variants '' into variants |
|---|
| 179 | :debug:main new fully merged portvariants: |
|---|
| 180 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv |
|---|
| 181 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 182 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 184 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 185 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 186 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 187 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 188 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 189 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 190 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 191 | :debug:main ncurses 5.9_1 is the latest installed |
|---|
| 192 | :debug:main ncurses 5.9_1 is active |
|---|
| 193 | :debug:main Merging existing variants '' into variants |
|---|
| 194 | :debug:main new fully merged portvariants: |
|---|
| 195 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses |
|---|
| 196 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 197 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 198 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 200 | :debug:main adding the default universal variant |
|---|
| 201 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 202 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 203 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 204 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 205 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 206 | :debug:main zlib 1.2.5_0 is active |
|---|
| 207 | :debug:main Merging existing variants '' into variants |
|---|
| 208 | :debug:main new fully merged portvariants: |
|---|
| 209 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib |
|---|
| 210 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 211 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 212 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 215 | :debug:main adding the default universal variant |
|---|
| 216 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 217 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 218 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 219 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 220 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 221 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 222 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 223 | :debug:main new fully merged portvariants: perl5_12 + |
|---|
| 224 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 |
|---|
| 225 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 226 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 227 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 228 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 229 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 230 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 231 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 232 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 233 | :debug:main pango 1.28.4_1 exists in the ports tree |
|---|
| 234 | :debug:main pango 1.28.4_1 +x11 is the latest installed |
|---|
| 235 | :debug:main pango 1.28.4_1 +x11 is active |
|---|
| 236 | :debug:main Merging existing variants '+x11' into variants |
|---|
| 237 | :debug:main new fully merged portvariants: x11 + |
|---|
| 238 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango |
|---|
| 239 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 240 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 241 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 242 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 243 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 244 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 245 | :debug:main adding the default universal variant |
|---|
| 246 | :debug:main Executing variant x11 provides x11 |
|---|
| 247 | :debug:main No need to upgrade! pango 1.28.4_1 >= pango 1.28.4_1 |
|---|
| 248 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 249 | :debug:main cairo 1.10.2_4 exists in the ports tree |
|---|
| 250 | :debug:main cairo 1.10.2_4 +x11 is the latest installed |
|---|
| 251 | :debug:main cairo 1.10.2_4 +x11 is active |
|---|
| 252 | :debug:main Merging existing variants '+x11' into variants |
|---|
| 253 | :debug:main new fully merged portvariants: x11 + |
|---|
| 254 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo |
|---|
| 255 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 256 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 257 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 258 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 259 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 260 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 261 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 262 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 263 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 264 | :debug:main Executing variant x11 provides x11 |
|---|
| 265 | :debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4 |
|---|
| 266 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 267 | :debug:main libpixman 0.22.2_1 exists in the ports tree |
|---|
| 268 | :debug:main libpixman 0.22.2_1 is the latest installed |
|---|
| 269 | :debug:main libpixman 0.22.2_1 is active |
|---|
| 270 | :debug:main Merging existing variants '' into variants |
|---|
| 271 | :debug:main new fully merged portvariants: |
|---|
| 272 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman |
|---|
| 273 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 274 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 275 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 276 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 277 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 278 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 279 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 280 | :debug:main No need to upgrade! libpixman 0.22.2_1 >= libpixman 0.22.2_1 |
|---|
| 281 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 282 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 283 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 284 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 285 | :debug:main Merging existing variants '' into variants |
|---|
| 286 | :debug:main new fully merged portvariants: |
|---|
| 287 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig |
|---|
| 288 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 289 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 290 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 291 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 292 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 293 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 294 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 295 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 296 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 297 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 298 | :debug:main freetype 2.4.6_0 exists in the ports tree |
|---|
| 299 | :debug:main freetype 2.4.6_0 is the latest installed |
|---|
| 300 | :debug:main freetype 2.4.6_0 is active |
|---|
| 301 | :debug:main Merging existing variants '' into variants |
|---|
| 302 | :debug:main new fully merged portvariants: |
|---|
| 303 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype |
|---|
| 304 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 305 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 306 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 307 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 308 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 309 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 310 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 311 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 312 | :debug:main No need to upgrade! freetype 2.4.6_0 >= freetype 2.4.6_0 |
|---|
| 313 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 314 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 315 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 316 | :debug:main bzip2 1.0.6_0 is active |
|---|
| 317 | :debug:main Merging existing variants '' into variants |
|---|
| 318 | :debug:main new fully merged portvariants: |
|---|
| 319 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 |
|---|
| 320 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 321 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 322 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 323 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 324 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 325 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 326 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 327 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 328 | :debug:main libpng 1.4.8_0 exists in the ports tree |
|---|
| 329 | :debug:main libpng 1.4.8_0 is the latest installed |
|---|
| 330 | :debug:main libpng 1.4.8_0 is active |
|---|
| 331 | :debug:main Merging existing variants '' into variants |
|---|
| 332 | :debug:main new fully merged portvariants: |
|---|
| 333 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng |
|---|
| 334 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 335 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 336 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 337 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 338 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 339 | :debug:main adding the default universal variant |
|---|
| 340 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 341 | :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 |
|---|
| 342 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 343 | :debug:main xrender 0.9.6_0 exists in the ports tree |
|---|
| 344 | :debug:main xrender 0.9.6_0 is the latest installed |
|---|
| 345 | :debug:main xrender 0.9.6_0 is active |
|---|
| 346 | :debug:main Merging existing variants '' into variants |
|---|
| 347 | :debug:main new fully merged portvariants: |
|---|
| 348 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender |
|---|
| 349 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 350 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 351 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 352 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 353 | :debug:main adding the default universal variant |
|---|
| 354 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 355 | :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 |
|---|
| 356 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 357 | :debug:main xorg-libX11 1.4.4_0 exists in the ports tree |
|---|
| 358 | :debug:main xorg-libX11 1.4.4_0 is the latest installed |
|---|
| 359 | :debug:main xorg-libX11 1.4.4_0 is active |
|---|
| 360 | :debug:main Merging existing variants '' into variants |
|---|
| 361 | :debug:main new fully merged portvariants: |
|---|
| 362 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11 |
|---|
| 363 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 364 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 365 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 366 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 367 | :debug:main adding the default universal variant |
|---|
| 368 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 369 | :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 |
|---|
| 370 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 371 | :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 372 | :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed |
|---|
| 373 | :debug:main xorg-libXdmcp 1.1.0_0 is active |
|---|
| 374 | :debug:main Merging existing variants '' into variants |
|---|
| 375 | :debug:main new fully merged portvariants: |
|---|
| 376 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp |
|---|
| 377 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 378 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 379 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 380 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 381 | :debug:main adding the default universal variant |
|---|
| 382 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 383 | :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 384 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 385 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 386 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 387 | :debug:main xorg-libXau 1.0.6_0 is active |
|---|
| 388 | :debug:main Merging existing variants '' into variants |
|---|
| 389 | :debug:main new fully merged portvariants: |
|---|
| 390 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau |
|---|
| 391 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 392 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 393 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 394 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 395 | :debug:main adding the default universal variant |
|---|
| 396 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 397 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 398 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 399 | :debug:main xorg-xproto 7.0.22_0 exists in the ports tree |
|---|
| 400 | :debug:main xorg-xproto 7.0.22_0 is the latest installed |
|---|
| 401 | :debug:main xorg-xproto 7.0.22_0 is active |
|---|
| 402 | :debug:main Merging existing variants '' into variants |
|---|
| 403 | :debug:main new fully merged portvariants: |
|---|
| 404 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto |
|---|
| 405 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 406 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 407 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 408 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 409 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 410 | :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 |
|---|
| 411 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 412 | :debug:main xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 413 | :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed |
|---|
| 414 | :debug:main xorg-libxcb 1.7_0 +python27 is active |
|---|
| 415 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 416 | :debug:main new fully merged portvariants: python27 + |
|---|
| 417 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb |
|---|
| 418 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 419 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 420 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 421 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 422 | :debug:main adding the default universal variant |
|---|
| 423 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 424 | :debug:main Executing variant python27 provides python27 |
|---|
| 425 | :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 |
|---|
| 426 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 427 | :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 428 | :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed |
|---|
| 429 | :debug:main xorg-xcb-proto 1.6_0 +python27 is active |
|---|
| 430 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 431 | :debug:main new fully merged portvariants: python27 + |
|---|
| 432 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto |
|---|
| 433 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 434 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 435 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 436 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 437 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 438 | :debug:main Executing variant python27 provides python27 |
|---|
| 439 | :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 440 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 441 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 442 | :debug:main libxml2 2.7.8_0 is the latest installed |
|---|
| 443 | :debug:main libxml2 2.7.8_0 is active |
|---|
| 444 | :debug:main Merging existing variants '' into variants |
|---|
| 445 | :debug:main new fully merged portvariants: |
|---|
| 446 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 |
|---|
| 447 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 448 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 449 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 450 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 451 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 452 | :debug:main adding the default universal variant |
|---|
| 453 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 454 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 455 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 456 | :debug:main python27 2.7.2_0 exists in the ports tree |
|---|
| 457 | :debug:main python27 2.7.2_0 is the latest installed |
|---|
| 458 | :debug:main python27 2.7.2_0 is active |
|---|
| 459 | :debug:main Merging existing variants '' into variants |
|---|
| 460 | :debug:main new fully merged portvariants: |
|---|
| 461 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 |
|---|
| 462 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 463 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 464 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 465 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 466 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 467 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 468 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 469 | :debug:main No need to upgrade! python27 2.7.2_0 >= python27 2.7.2_0 |
|---|
| 470 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 471 | :debug:main openssl 1.0.0d_0 exists in the ports tree |
|---|
| 472 | :debug:main openssl 1.0.0d_0 is the latest installed |
|---|
| 473 | :debug:main openssl 1.0.0d_0 is active |
|---|
| 474 | :debug:main Merging existing variants '' into variants |
|---|
| 475 | :debug:main new fully merged portvariants: |
|---|
| 476 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl |
|---|
| 477 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 478 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 479 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 480 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 481 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 482 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 483 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 484 | :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 |
|---|
| 485 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 486 | :debug:main sqlite3 3.7.7.1_0 exists in the ports tree |
|---|
| 487 | :debug:main sqlite3 3.7.7.1_0 is the latest installed |
|---|
| 488 | :debug:main sqlite3 3.7.7.1_0 is active |
|---|
| 489 | :debug:main Merging existing variants '' into variants |
|---|
| 490 | :debug:main new fully merged portvariants: |
|---|
| 491 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 |
|---|
| 492 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 493 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 494 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 495 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 496 | :debug:main adding the default universal variant |
|---|
| 497 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 498 | :debug:main No need to upgrade! sqlite3 3.7.7.1_0 >= sqlite3 3.7.7.1_0 |
|---|
| 499 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 500 | :debug:main readline 6.2.000_0 exists in the ports tree |
|---|
| 501 | :debug:main readline 6.2.000_0 is the latest installed |
|---|
| 502 | :debug:main readline 6.2.000_0 is active |
|---|
| 503 | :debug:main Merging existing variants '' into variants |
|---|
| 504 | :debug:main new fully merged portvariants: |
|---|
| 505 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline |
|---|
| 506 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 507 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 508 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 509 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 510 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 511 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 512 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 513 | :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 514 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 515 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 516 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 517 | :debug:main db46 4.6.21_6 is active |
|---|
| 518 | :debug:main Merging existing variants '' into variants |
|---|
| 519 | :debug:main new fully merged portvariants: |
|---|
| 520 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 |
|---|
| 521 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 522 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 523 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 524 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 525 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 526 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 527 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 528 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 529 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 530 | :debug:main gdbm 1.8.3_3 exists in the ports tree |
|---|
| 531 | :debug:main gdbm 1.8.3_3 is the latest installed |
|---|
| 532 | :debug:main gdbm 1.8.3_3 is active |
|---|
| 533 | :debug:main Merging existing variants '' into variants |
|---|
| 534 | :debug:main new fully merged portvariants: |
|---|
| 535 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm |
|---|
| 536 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 537 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 538 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 539 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 540 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 541 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 542 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 543 | :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 |
|---|
| 544 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 545 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 546 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 547 | :debug:main python_select 0.3_1 is active |
|---|
| 548 | :debug:main Merging existing variants '' into variants |
|---|
| 549 | :debug:main new fully merged portvariants: |
|---|
| 550 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select |
|---|
| 551 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 552 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 553 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 554 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 555 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 556 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 557 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 558 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 559 | :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 560 | :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 561 | :debug:main xorg-libpthread-stubs 0.3_0 is active |
|---|
| 562 | :debug:main Merging existing variants '' into variants |
|---|
| 563 | :debug:main new fully merged portvariants: |
|---|
| 564 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs |
|---|
| 565 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 566 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 567 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 568 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 569 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 570 | :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 571 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 572 | :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree |
|---|
| 573 | :debug:main xorg-kbproto 1.0.5_0 is the latest installed |
|---|
| 574 | :debug:main xorg-kbproto 1.0.5_0 is active |
|---|
| 575 | :debug:main Merging existing variants '' into variants |
|---|
| 576 | :debug:main new fully merged portvariants: |
|---|
| 577 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto |
|---|
| 578 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 579 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 580 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 581 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 582 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 583 | :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 |
|---|
| 584 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 585 | :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree |
|---|
| 586 | :debug:main xorg-renderproto 0.11.1_0 is the latest installed |
|---|
| 587 | :debug:main xorg-renderproto 0.11.1_0 is active |
|---|
| 588 | :debug:main Merging existing variants '' into variants |
|---|
| 589 | :debug:main new fully merged portvariants: |
|---|
| 590 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto |
|---|
| 591 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 592 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 593 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 594 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 595 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 596 | :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 |
|---|
| 597 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 598 | :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree |
|---|
| 599 | :debug:main xorg-xcb-util 0.3.8_0 is the latest installed |
|---|
| 600 | :debug:main xorg-xcb-util 0.3.8_0 is active |
|---|
| 601 | :debug:main Merging existing variants '' into variants |
|---|
| 602 | :debug:main new fully merged portvariants: |
|---|
| 603 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util |
|---|
| 604 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 605 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 606 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 607 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 608 | :debug:main adding the default universal variant |
|---|
| 609 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 610 | :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util 0.3.8_0 |
|---|
| 611 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 612 | :debug:main Xft2 2.2.0_0 exists in the ports tree |
|---|
| 613 | :debug:main Xft2 2.2.0_0 is the latest installed |
|---|
| 614 | :debug:main Xft2 2.2.0_0 is active |
|---|
| 615 | :debug:main Merging existing variants '' into variants |
|---|
| 616 | :debug:main new fully merged portvariants: |
|---|
| 617 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2 |
|---|
| 618 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 619 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 620 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 621 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 622 | :debug:main adding the default universal variant |
|---|
| 623 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 624 | :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 |
|---|
| 625 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 626 | :debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree |
|---|
| 627 | :debug:main gdk-pixbuf2 2.22.1_1 is the latest installed |
|---|
| 628 | :debug:main gdk-pixbuf2 2.22.1_1 is active |
|---|
| 629 | :debug:main Merging existing variants '' into variants |
|---|
| 630 | :debug:main new fully merged portvariants: |
|---|
| 631 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gdk-pixbuf2 |
|---|
| 632 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 633 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 634 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 635 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 636 | :debug:main adding the default universal variant |
|---|
| 637 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 638 | :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2 2.22.1_1 |
|---|
| 639 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 640 | :debug:main jasper 1.900.1_7 exists in the ports tree |
|---|
| 641 | :debug:main jasper 1.900.1_7 is the latest installed |
|---|
| 642 | :debug:main jasper 1.900.1_7 is active |
|---|
| 643 | :debug:main Merging existing variants '' into variants |
|---|
| 644 | :debug:main new fully merged portvariants: |
|---|
| 645 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper |
|---|
| 646 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 647 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 648 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 649 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 650 | :debug:main adding the default universal variant |
|---|
| 651 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 652 | :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 |
|---|
| 653 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 654 | :debug:main jpeg 8c_0 exists in the ports tree |
|---|
| 655 | :debug:main jpeg 8c_0 is the latest installed |
|---|
| 656 | :debug:main jpeg 8c_0 is active |
|---|
| 657 | :debug:main Merging existing variants '' into variants |
|---|
| 658 | :debug:main new fully merged portvariants: |
|---|
| 659 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg |
|---|
| 660 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 661 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 662 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 663 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 664 | :debug:main adding the default universal variant |
|---|
| 665 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 666 | :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 |
|---|
| 667 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 668 | :debug:main tiff 3.9.5_0 exists in the ports tree |
|---|
| 669 | :debug:main tiff 3.9.5_0 is the latest installed |
|---|
| 670 | :debug:main tiff 3.9.5_0 is active |
|---|
| 671 | :debug:main Merging existing variants '' into variants |
|---|
| 672 | :debug:main new fully merged portvariants: |
|---|
| 673 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff |
|---|
| 674 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 675 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 676 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 677 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 678 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 679 | :debug:main adding the default universal variant |
|---|
| 680 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 681 | :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 |
|---|
| 682 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 683 | :debug:main xorg-libXi 1.4.3_0 exists in the ports tree |
|---|
| 684 | :debug:main xorg-libXi 1.4.3_0 is the latest installed |
|---|
| 685 | :debug:main xorg-libXi 1.4.3_0 is active |
|---|
| 686 | :debug:main Merging existing variants '' into variants |
|---|
| 687 | :debug:main new fully merged portvariants: |
|---|
| 688 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXi |
|---|
| 689 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 690 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 691 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 692 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 693 | :debug:main adding the default universal variant |
|---|
| 694 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 695 | :debug:main No need to upgrade! xorg-libXi 1.4.3_0 >= xorg-libXi 1.4.3_0 |
|---|
| 696 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 697 | :debug:main xorg-libXext 1.3.0_0 exists in the ports tree |
|---|
| 698 | :debug:main xorg-libXext 1.3.0_0 is the latest installed |
|---|
| 699 | :debug:main xorg-libXext 1.3.0_0 is active |
|---|
| 700 | :debug:main Merging existing variants '' into variants |
|---|
| 701 | :debug:main new fully merged portvariants: |
|---|
| 702 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext |
|---|
| 703 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 704 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 705 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 706 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 707 | :debug:main adding the default universal variant |
|---|
| 708 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 709 | :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 |
|---|
| 710 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 711 | :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree |
|---|
| 712 | :debug:main xorg-xextproto 7.2.0_0 is the latest installed |
|---|
| 713 | :debug:main xorg-xextproto 7.2.0_0 is active |
|---|
| 714 | :debug:main Merging existing variants '' into variants |
|---|
| 715 | :debug:main new fully merged portvariants: |
|---|
| 716 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto |
|---|
| 717 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 718 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 719 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 720 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 721 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 722 | :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 |
|---|
| 723 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 724 | :debug:main xorg-inputproto 2.0.2_0 exists in the ports tree |
|---|
| 725 | :debug:main xorg-inputproto 2.0.2_0 is the latest installed |
|---|
| 726 | :debug:main xorg-inputproto 2.0.2_0 is active |
|---|
| 727 | :debug:main Merging existing variants '' into variants |
|---|
| 728 | :debug:main new fully merged portvariants: |
|---|
| 729 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-inputproto |
|---|
| 730 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 731 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 732 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 733 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 734 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 735 | :debug:main No need to upgrade! xorg-inputproto 2.0.2_0 >= xorg-inputproto 2.0.2_0 |
|---|
| 736 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 737 | :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree |
|---|
| 738 | :debug:main xorg-libXrandr 1.3.2_0 is the latest installed |
|---|
| 739 | :debug:main xorg-libXrandr 1.3.2_0 is active |
|---|
| 740 | :debug:main Merging existing variants '' into variants |
|---|
| 741 | :debug:main new fully merged portvariants: |
|---|
| 742 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXrandr |
|---|
| 743 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 744 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 745 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 746 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 747 | :debug:main adding the default universal variant |
|---|
| 748 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 749 | :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0 |
|---|
| 750 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 751 | :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree |
|---|
| 752 | :debug:main xorg-randrproto 1.3.2_0 is the latest installed |
|---|
| 753 | :debug:main xorg-randrproto 1.3.2_0 is active |
|---|
| 754 | :debug:main Merging existing variants '' into variants |
|---|
| 755 | :debug:main new fully merged portvariants: |
|---|
| 756 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-randrproto |
|---|
| 757 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 758 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 759 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 760 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 761 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 762 | :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0 |
|---|
| 763 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 764 | :debug:main xorg-libXcursor 1.1.12_0 exists in the ports tree |
|---|
| 765 | :debug:main xorg-libXcursor 1.1.12_0 is the latest installed |
|---|
| 766 | :debug:main xorg-libXcursor 1.1.12_0 is active |
|---|
| 767 | :debug:main Merging existing variants '' into variants |
|---|
| 768 | :debug:main new fully merged portvariants: |
|---|
| 769 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcursor |
|---|
| 770 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 771 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 772 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 773 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 774 | :debug:main adding the default universal variant |
|---|
| 775 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 776 | :debug:main No need to upgrade! xorg-libXcursor 1.1.12_0 >= xorg-libXcursor 1.1.12_0 |
|---|
| 777 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 778 | :debug:main xorg-libXfixes 5.0_0 exists in the ports tree |
|---|
| 779 | :debug:main xorg-libXfixes 5.0_0 is the latest installed |
|---|
| 780 | :debug:main xorg-libXfixes 5.0_0 is active |
|---|
| 781 | :debug:main Merging existing variants '' into variants |
|---|
| 782 | :debug:main new fully merged portvariants: |
|---|
| 783 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXfixes |
|---|
| 784 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 785 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 786 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 787 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 788 | :debug:main adding the default universal variant |
|---|
| 789 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 790 | :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0 |
|---|
| 791 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 792 | :debug:main xorg-fixesproto 5.0_0 exists in the ports tree |
|---|
| 793 | :debug:main xorg-fixesproto 5.0_0 is the latest installed |
|---|
| 794 | :debug:main xorg-fixesproto 5.0_0 is active |
|---|
| 795 | :debug:main Merging existing variants '' into variants |
|---|
| 796 | :debug:main new fully merged portvariants: |
|---|
| 797 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-fixesproto |
|---|
| 798 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 799 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 800 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 801 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 802 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 803 | :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 |
|---|
| 804 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 805 | :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree |
|---|
| 806 | :debug:main xorg-libXinerama 1.1.1_0 is the latest installed |
|---|
| 807 | :debug:main xorg-libXinerama 1.1.1_0 is active |
|---|
| 808 | :debug:main Merging existing variants '' into variants |
|---|
| 809 | :debug:main new fully merged portvariants: |
|---|
| 810 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXinerama |
|---|
| 811 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 812 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 813 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 814 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 815 | :debug:main adding the default universal variant |
|---|
| 816 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 817 | :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0 |
|---|
| 818 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 819 | :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree |
|---|
| 820 | :debug:main xorg-xineramaproto 1.2.1_0 is the latest installed |
|---|
| 821 | :debug:main xorg-xineramaproto 1.2.1_0 is active |
|---|
| 822 | :debug:main Merging existing variants '' into variants |
|---|
| 823 | :debug:main new fully merged portvariants: |
|---|
| 824 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xineramaproto |
|---|
| 825 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 826 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 827 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 828 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 829 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 830 | :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0 |
|---|
| 831 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 832 | :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree |
|---|
| 833 | :debug:main xorg-libXdamage 1.1.3_0 is the latest installed |
|---|
| 834 | :debug:main xorg-libXdamage 1.1.3_0 is active |
|---|
| 835 | :debug:main Merging existing variants '' into variants |
|---|
| 836 | :debug:main new fully merged portvariants: |
|---|
| 837 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdamage |
|---|
| 838 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 839 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 840 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 841 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 842 | :debug:main adding the default universal variant |
|---|
| 843 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 844 | :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0 |
|---|
| 845 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 846 | :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree |
|---|
| 847 | :debug:main xorg-damageproto 1.2.1_0 is the latest installed |
|---|
| 848 | :debug:main xorg-damageproto 1.2.1_0 is active |
|---|
| 849 | :debug:main Merging existing variants '' into variants |
|---|
| 850 | :debug:main new fully merged portvariants: |
|---|
| 851 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-damageproto |
|---|
| 852 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 853 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 854 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 855 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 856 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 857 | :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0 |
|---|
| 858 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 859 | :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree |
|---|
| 860 | :debug:main xorg-libXcomposite 0.4.3_0 is the latest installed |
|---|
| 861 | :debug:main xorg-libXcomposite 0.4.3_0 is active |
|---|
| 862 | :debug:main Merging existing variants '' into variants |
|---|
| 863 | :debug:main new fully merged portvariants: |
|---|
| 864 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcomposite |
|---|
| 865 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 866 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 867 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 868 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 869 | :debug:main adding the default universal variant |
|---|
| 870 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 871 | :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0 |
|---|
| 872 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 873 | :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree |
|---|
| 874 | :debug:main xorg-compositeproto 0.4.2_0 is the latest installed |
|---|
| 875 | :debug:main xorg-compositeproto 0.4.2_0 is active |
|---|
| 876 | :debug:main Merging existing variants '' into variants |
|---|
| 877 | :debug:main new fully merged portvariants: |
|---|
| 878 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-compositeproto |
|---|
| 879 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 880 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 881 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 882 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 883 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 884 | :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0 |
|---|
| 885 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 886 | :debug:main shared-mime-info 0.90_0 exists in the ports tree |
|---|
| 887 | :debug:main shared-mime-info 0.90_0 is the latest installed |
|---|
| 888 | :debug:main shared-mime-info 0.90_0 is active |
|---|
| 889 | :debug:main Merging existing variants '' into variants |
|---|
| 890 | :debug:main new fully merged portvariants: |
|---|
| 891 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/shared-mime-info |
|---|
| 892 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 893 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 894 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 895 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 896 | :debug:main adding the default universal variant |
|---|
| 897 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 898 | :debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-info 0.90_0 |
|---|
| 899 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 900 | :debug:main gd2 2.0.35_10 exists in the ports tree |
|---|
| 901 | :debug:main gd2 2.0.35_10 is the latest installed |
|---|
| 902 | :debug:main gd2 2.0.35_10 is active |
|---|
| 903 | :debug:main Merging existing variants '' into variants |
|---|
| 904 | :debug:main new fully merged portvariants: |
|---|
| 905 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gd2 |
|---|
| 906 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 907 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 908 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 909 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 910 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 911 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 912 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 913 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 914 | :debug:main No need to upgrade! gd2 2.0.35_10 >= gd2 2.0.35_10 |
|---|
| 915 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 916 | :debug:main xpm 3.5.9_0 exists in the ports tree |
|---|
| 917 | :debug:main xpm 3.5.9_0 is the latest installed |
|---|
| 918 | :debug:main xpm 3.5.9_0 is active |
|---|
| 919 | :debug:main Merging existing variants '' into variants |
|---|
| 920 | :debug:main new fully merged portvariants: |
|---|
| 921 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm |
|---|
| 922 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 923 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 924 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 925 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 926 | :debug:main adding the default universal variant |
|---|
| 927 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 928 | :debug:main No need to upgrade! xpm 3.5.9_0 >= xpm 3.5.9_0 |
|---|
| 929 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 930 | :debug:main xorg-libXt 1.1.1_0 exists in the ports tree |
|---|
| 931 | :debug:main xorg-libXt 1.1.1_0 is the latest installed |
|---|
| 932 | :debug:main xorg-libXt 1.1.1_0 is active |
|---|
| 933 | :debug:main Merging existing variants '' into variants |
|---|
| 934 | :debug:main new fully merged portvariants: |
|---|
| 935 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt |
|---|
| 936 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 937 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 938 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 939 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 940 | :debug:main adding the default universal variant |
|---|
| 941 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 942 | :debug:main No need to upgrade! xorg-libXt 1.1.1_0 >= xorg-libXt 1.1.1_0 |
|---|
| 943 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 944 | :debug:main xorg-libsm 1.2.0_0 exists in the ports tree |
|---|
| 945 | :debug:main xorg-libsm 1.2.0_0 is the latest installed |
|---|
| 946 | :debug:main xorg-libsm 1.2.0_0 is active |
|---|
| 947 | :debug:main Merging existing variants '' into variants |
|---|
| 948 | :debug:main new fully merged portvariants: |
|---|
| 949 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm |
|---|
| 950 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 951 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 952 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 953 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 954 | :debug:main adding the default universal variant |
|---|
| 955 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 956 | :debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0 |
|---|
| 957 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 958 | :debug:main xorg-libice 1.0.7_0 exists in the ports tree |
|---|
| 959 | :debug:main xorg-libice 1.0.7_0 is the latest installed |
|---|
| 960 | :debug:main xorg-libice 1.0.7_0 is active |
|---|
| 961 | :debug:main Merging existing variants '' into variants |
|---|
| 962 | :debug:main new fully merged portvariants: |
|---|
| 963 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice |
|---|
| 964 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 965 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 966 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 967 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 968 | :debug:main adding the default universal variant |
|---|
| 969 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 970 | :debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0 |
|---|
| 971 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 972 | :debug:main dbus 1.4.12_0 exists in the ports tree |
|---|
| 973 | :debug:main dbus 1.4.12_0 is the latest installed |
|---|
| 974 | :debug:main dbus 1.4.12_0 is active |
|---|
| 975 | :debug:main Merging existing variants '' into variants |
|---|
| 976 | :debug:main new fully merged portvariants: |
|---|
| 977 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus |
|---|
| 978 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 979 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 980 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 981 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 982 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 983 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 984 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 985 | :debug:main No need to upgrade! dbus 1.4.12_0 >= dbus 1.4.12_0 |
|---|
| 986 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 987 | :debug:main tk 8.5.9_0 exists in the ports tree |
|---|
| 988 | :debug:main tk 8.5.9_0 is the latest installed |
|---|
| 989 | :debug:main tk 8.5.9_0 is active |
|---|
| 990 | :debug:main Merging existing variants '' into variants |
|---|
| 991 | :debug:main new fully merged portvariants: |
|---|
| 992 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/tk |
|---|
| 993 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 994 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 995 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 996 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 997 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 998 | :debug:main adding the default universal variant |
|---|
| 999 | :debug:main No need to upgrade! tk 8.5.9_0 >= tk 8.5.9_0 |
|---|
| 1000 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 1001 | :debug:main tcl 8.5.9_0 exists in the ports tree |
|---|
| 1002 | :debug:main tcl 8.5.9_0 is the latest installed |
|---|
| 1003 | :debug:main tcl 8.5.9_0 is active |
|---|
| 1004 | :debug:main Merging existing variants '' into variants |
|---|
| 1005 | :debug:main new fully merged portvariants: |
|---|
| 1006 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/tcl |
|---|
| 1007 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 1008 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1009 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1010 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1011 | :debug:main adding the default universal variant |
|---|
| 1012 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1013 | :debug:main No need to upgrade! tcl 8.5.9_0 >= tcl 8.5.9_0 |
|---|
| 1014 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 1015 | :debug:main xorg-libXScrnSaver 1.2.1_0 exists in the ports tree |
|---|
| 1016 | :debug:main xorg-libXScrnSaver 1.2.1_0 is the latest installed |
|---|
| 1017 | :debug:main xorg-libXScrnSaver 1.2.1_0 is active |
|---|
| 1018 | :debug:main Merging existing variants '' into variants |
|---|
| 1019 | :debug:main new fully merged portvariants: |
|---|
| 1020 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXScrnSaver |
|---|
| 1021 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 1022 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1023 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1024 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1025 | :debug:main adding the default universal variant |
|---|
| 1026 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1027 | :debug:main No need to upgrade! xorg-libXScrnSaver 1.2.1_0 >= xorg-libXScrnSaver 1.2.1_0 |
|---|
| 1028 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 1029 | :debug:main xorg-scrnsaverproto 1.2.1_0 exists in the ports tree |
|---|
| 1030 | :debug:main xorg-scrnsaverproto 1.2.1_0 is the latest installed |
|---|
| 1031 | :debug:main xorg-scrnsaverproto 1.2.1_0 is active |
|---|
| 1032 | :debug:main Merging existing variants '' into variants |
|---|
| 1033 | :debug:main new fully merged portvariants: |
|---|
| 1034 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-scrnsaverproto |
|---|
| 1035 | :debug:main OS darwin/11.1.0 (Mac OS X 10.7) arch i386 |
|---|
| 1036 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1037 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1038 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1039 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 1040 | :debug:main No need to upgrade! xorg-scrnsaverproto 1.2.1_0 >= xorg-scrnsaverproto 1.2.1_0 |
|---|
| 1041 | :msg:main ---> Computing dependencies for pcb:info:main .:debug:main Searching for dependency: intltool |
|---|
| 1042 | :debug:main Found Dependency: receipt exists for intltool |
|---|
| 1043 | :debug:main Searching for dependency: gtk2 |
|---|
| 1044 | :debug:main Found Dependency: receipt exists for gtk2 |
|---|
| 1045 | :debug:main Searching for dependency: gd2 |
|---|
| 1046 | :debug:main Found Dependency: receipt exists for gd2 |
|---|
| 1047 | :debug:main Searching for dependency: dbus |
|---|
| 1048 | :debug:main Found Dependency: receipt exists for dbus |
|---|
| 1049 | :debug:main Searching for dependency: tk |
|---|
| 1050 | :debug:main Found Dependency: receipt exists for tk |
|---|
| 1051 | :msg:main |
|---|
| 1052 | :debug:main Executing org.macports.main (pcb) |
|---|
| 1053 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 1054 | :debug:main egid changed to: 501 |
|---|
| 1055 | :debug:main euid changed to: 505 |
|---|
| 1056 | :debug:main Skipping completed org.macports.archivefetch (pcb) |
|---|
| 1057 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1058 | :debug:main Skipping completed org.macports.fetch (pcb) |
|---|
| 1059 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1060 | :debug:main Skipping completed org.macports.checksum (pcb) |
|---|
| 1061 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1062 | :debug:main Skipping completed org.macports.extract (pcb) |
|---|
| 1063 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1064 | :debug:main Skipping completed org.macports.patch (pcb) |
|---|
| 1065 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1066 | :debug:main Skipping completed org.macports.configure (pcb) |
|---|
| 1067 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 1068 | :debug:build build phase started at Sun Aug 21 08:14:34 CDT 2011 |
|---|
| 1069 | :notice:build ---> Building pcb |
|---|
| 1070 | :debug:build Executing org.macports.build (pcb) |
|---|
| 1071 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 1072 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103" && /usr/bin/make -j4 -w all' |
|---|
| 1073 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103" && /usr/bin/make -j4 -w all |
|---|
| 1074 | :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103' |
|---|
| 1075 | :info:build /usr/bin/make all-recursive |
|---|
| 1076 | :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103' |
|---|
| 1077 | :info:build Making all in win32 |
|---|
| 1078 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/win32' |
|---|
| 1079 | :info:build make[2]: Nothing to be done for `all'. |
|---|
| 1080 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/win32' |
|---|
| 1081 | :info:build Making all in intl |
|---|
| 1082 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/intl' |
|---|
| 1083 | :info:build make[2]: Nothing to be done for `all'. |
|---|
| 1084 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/intl' |
|---|
| 1085 | :info:build Making all in src |
|---|
| 1086 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1087 | :info:build /usr/bin/make all-recursive |
|---|
| 1088 | :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1089 | :info:build Making all in icons |
|---|
| 1090 | :info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src/icons' |
|---|
| 1091 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 1092 | :info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src/icons' |
|---|
| 1093 | :info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1094 | :info:build /Developer/usr/bin/llvm-gcc-4.2 -std=gnu99 -DNDEBUG -pipe -O2 -arch x86_64 -I/opt/local/include -I/opt/local/include -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -D_REENTRANT -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng14 -Wall -Wdeclaration-after-statement -L/opt/local/lib -arch x86_64 -rdynamic -o pcb action.o autoplace.o autoroute.o buffer.o change.o clip.o command.o compat.o copy.o create.o crosshair.o data.o djopt.o draw.o drill.o edif.o error.o file.o find.o flags.o fontmode.o heap.o insert.o intersect.o line.o lrealpath.o main.o mirror.o misc.o move.o mtspace.o mymem.o netlist.o parse_l.o parse_y.o polygon.o polygon1.o puller.o print.o rats.o remove.o report.o res_parse.o res_lex.o rotate.o rtree.o rubberband.o search.o select.o set.o strflags.o thermal.o undo.o vector.o vendor.o hid/common/actions.o hid/common/flags.o hid/common/hidinit.o hid/common/hidnogui.o hid/common/extents.o hid/common/draw_helpers.o hid/common/hid_resource.o toporouter.o dbus-pcbmain.o dbus.o libgtk.a liblpr.a libbom.a libgerber.a libnelma.a libpng.a libps.a libgts.a -lfl -ldl -lm -L/opt/local/lib -ldbus-1 -lpthread -lXrender -L/opt/local/lib -lglib-2.0 -lintl -L/opt/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lgio-2.0 -lXfixes -lcairo -lX11 -lpng14 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng -lz -liconv -lgd -lintl -liconv -lc -Wl,-framework -Wl,CoreFoundation |
|---|
| 1095 | :info:build Undefined symbols for architecture x86_64: |
|---|
| 1096 | :info:build "_min_vertex_net_spacing", referenced from: |
|---|
| 1097 | :info:build _edge_flow in toporouter.o |
|---|
| 1098 | :info:build ld: symbol(s) not found for architecture x86_64 |
|---|
| 1099 | :info:build collect2: ld returned 1 exit status |
|---|
| 1100 | :info:build make[4]: *** [pcb] Error 1 |
|---|
| 1101 | :info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1102 | :info:build make[3]: *** [all-recursive] Error 1 |
|---|
| 1103 | :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1104 | :info:build make[2]: *** [all] Error 2 |
|---|
| 1105 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103/src' |
|---|
| 1106 | :info:build make[1]: *** [all-recursive] Error 1 |
|---|
| 1107 | :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103' |
|---|
| 1108 | :info:build make: *** [all] Error 2 |
|---|
| 1109 | :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103' |
|---|
| 1110 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/work/pcb-20091103" && /usr/bin/make -j4 -w all " returned error 2 |
|---|
| 1111 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 1112 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 1113 | while executing |
|---|
| 1114 | "command_exec build" |
|---|
| 1115 | (procedure "portbuild::build_main" line 8) |
|---|
| 1116 | invoked from within |
|---|
| 1117 | "$procedure $targetname" |
|---|
| 1118 | :info:build Warning: the following items did not execute (for pcb): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 1119 | :notice:build Log for pcb is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_pcb/pcb/main.log |
|---|
