| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.26_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.26_0 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.26_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 |
|---|
| 16 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 17 | :debug:main glib2 2.28.8_0 exists in the ports tree |
|---|
| 18 | :debug:main glib2 2.28.8_0 is the latest installed |
|---|
| 19 | :debug:main glib2 2.28.8_0 +universal is active |
|---|
| 20 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 21 | :debug:main new fully merged portvariants: universal + |
|---|
| 22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 |
|---|
| 23 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 28 | :debug:main adding the default universal variant |
|---|
| 29 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 30 | :debug:main Executing variant universal provides universal |
|---|
| 31 | :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 |
|---|
| 32 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 33 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 34 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 35 | :debug:main gettext 0.18.1.1_2 +universal is active |
|---|
| 36 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 37 | :debug:main new fully merged portvariants: universal + |
|---|
| 38 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 39 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 40 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 44 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 45 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 46 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 47 | :debug:main Executing variant universal provides universal |
|---|
| 48 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 49 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 50 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 51 | :debug:main libiconv 1.14_0 +universal is the latest installed |
|---|
| 52 | :debug:main libiconv 1.14_0 +universal is active |
|---|
| 53 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 54 | :debug:main new fully merged portvariants: universal + |
|---|
| 55 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 56 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 57 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 58 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 59 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 60 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 61 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 62 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 63 | :debug:main Executing variant universal provides universal |
|---|
| 64 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 65 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 66 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 67 | :debug:main ncurses 5.9_1 +universal is the latest installed |
|---|
| 68 | :debug:main ncurses 5.9_1 +universal is active |
|---|
| 69 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 70 | :debug:main new fully merged portvariants: universal + |
|---|
| 71 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 72 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 73 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 74 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | :debug:main adding the default universal variant |
|---|
| 77 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 78 | :debug:main Executing variant universal provides universal |
|---|
| 79 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 80 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 81 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 82 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 83 | :debug:main expat 2.0.1_1 +universal is active |
|---|
| 84 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 85 | :debug:main new fully merged portvariants: universal + |
|---|
| 86 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 87 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 88 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 89 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 90 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 91 | :debug:main adding the default universal variant |
|---|
| 92 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 93 | :debug:main Executing variant universal provides universal |
|---|
| 94 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 95 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 96 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 97 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 98 | :debug:main zlib 1.2.5_0 +universal is active |
|---|
| 99 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 100 | :debug:main new fully merged portvariants: universal + |
|---|
| 101 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 102 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 103 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 104 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 107 | :debug:main adding the default universal variant |
|---|
| 108 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 109 | :debug:main Executing variant universal provides universal |
|---|
| 110 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 111 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 112 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 113 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 114 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 115 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 116 | :debug:main new fully merged portvariants: perl5_12 + |
|---|
| 117 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 118 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 119 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 123 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 124 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 125 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 126 | :debug:main perl5.12 5.12.3_1 exists in the ports tree |
|---|
| 127 | :debug:main perl5.12 5.12.3_1 is the latest installed |
|---|
| 128 | :debug:main perl5.12 5.12.3_1 is active |
|---|
| 129 | :debug:main Merging existing variants '' into variants |
|---|
| 130 | :debug:main new fully merged portvariants: |
|---|
| 131 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 |
|---|
| 132 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 133 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 134 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 135 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 136 | :debug:main adding the default universal variant |
|---|
| 137 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 138 | :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 |
|---|
| 139 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 140 | :debug:main libffi 3.0.9_0 exists in the ports tree |
|---|
| 141 | :debug:main libffi 3.0.9_0 is the latest installed |
|---|
| 142 | :debug:main libffi 3.0.9_0 is active |
|---|
| 143 | :debug:main Merging existing variants '' into variants |
|---|
| 144 | :debug:main new fully merged portvariants: |
|---|
| 145 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi |
|---|
| 146 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 147 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 148 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 149 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 150 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 151 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 152 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 153 | :debug:main No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0 |
|---|
| 154 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 155 | :debug:main python27 2.7.2_1 exists in the ports tree |
|---|
| 156 | :debug:main python27 2.7.2_1 +universal is the latest installed |
|---|
| 157 | :debug:main python27 2.7.2_1 +universal is active |
|---|
| 158 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 159 | :debug:main new fully merged portvariants: universal + |
|---|
| 160 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 |
|---|
| 161 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 162 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 163 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 164 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 165 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 166 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 167 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 168 | :debug:main Executing variant universal provides universal |
|---|
| 169 | :debug:main No need to upgrade! python27 2.7.2_1 >= python27 2.7.2_1 |
|---|
| 170 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 171 | :debug:main openssl 1.0.0d_0 exists in the ports tree |
|---|
| 172 | :debug:main openssl 1.0.0d_0 is the latest installed |
|---|
| 173 | :debug:main openssl 1.0.0d_0 +universal is active |
|---|
| 174 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 175 | :debug:main new fully merged portvariants: universal + |
|---|
| 176 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 177 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 178 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 179 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 180 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 181 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 182 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 183 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 184 | :debug:main Executing variant universal provides universal |
|---|
| 185 | :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 |
|---|
| 186 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 187 | :debug:main sqlite3 3.7.7.1_0 exists in the ports tree |
|---|
| 188 | :debug:main sqlite3 3.7.7.1_0 +universal is the latest installed |
|---|
| 189 | :debug:main sqlite3 3.7.7.1_0 +universal is active |
|---|
| 190 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 191 | :debug:main new fully merged portvariants: universal + |
|---|
| 192 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 193 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 194 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 195 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 196 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 197 | :debug:main adding the default universal variant |
|---|
| 198 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 199 | :debug:main Executing variant universal provides universal |
|---|
| 200 | :debug:main No need to upgrade! sqlite3 3.7.7.1_0 >= sqlite3 3.7.7.1_0 |
|---|
| 201 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 202 | :debug:main readline 6.2.000_0 exists in the ports tree |
|---|
| 203 | :debug:main readline 6.2.000_0 is the latest installed |
|---|
| 204 | :debug:main readline 6.2.000_0 +universal is active |
|---|
| 205 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 206 | :debug:main new fully merged portvariants: universal + |
|---|
| 207 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 208 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 209 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 210 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 211 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 212 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 213 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 214 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 215 | :debug:main Executing variant universal provides universal |
|---|
| 216 | :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 217 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 218 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 219 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 220 | :debug:main db46 4.6.21_6 +universal is active |
|---|
| 221 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 222 | :debug:main new fully merged portvariants: universal + |
|---|
| 223 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 224 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 225 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 226 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 227 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 228 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 229 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 230 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 231 | :debug:main Executing variant universal provides universal |
|---|
| 232 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 233 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 234 | :debug:main gdbm 1.9.1_0 exists in the ports tree |
|---|
| 235 | :debug:main gdbm 1.9.1_0 +universal is the latest installed |
|---|
| 236 | :debug:main gdbm 1.9.1_0 +universal is active |
|---|
| 237 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 238 | :debug:main new fully merged portvariants: universal + |
|---|
| 239 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 240 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 241 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 242 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 243 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 244 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 245 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 246 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 247 | :debug:main Executing variant universal provides universal |
|---|
| 248 | :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 |
|---|
| 249 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 250 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 251 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 252 | :debug:main bzip2 1.0.6_0 +universal is active |
|---|
| 253 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 254 | :debug:main new fully merged portvariants: universal + |
|---|
| 255 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 256 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 257 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 258 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 259 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 260 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 261 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 262 | :debug:main Executing variant universal provides universal |
|---|
| 263 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 264 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 265 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 266 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 267 | :debug:main python_select 0.3_1 is active |
|---|
| 268 | :debug:main Merging existing variants '' into variants |
|---|
| 269 | :debug:main new fully merged portvariants: |
|---|
| 270 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select |
|---|
| 271 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 272 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 273 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 274 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 275 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 276 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 277 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 278 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 279 | :debug:main gcc45 4.5.3_0 exists in the ports tree |
|---|
| 280 | :debug:main gcc45 4.5.3_0 is the latest installed |
|---|
| 281 | :debug:main gcc45 4.5.3_0 is active |
|---|
| 282 | :debug:main Merging existing variants '' into variants |
|---|
| 283 | :debug:main new fully merged portvariants: |
|---|
| 284 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc45 |
|---|
| 285 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 286 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 287 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 288 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 289 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 290 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 291 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 292 | :debug:main No need to upgrade! gcc45 4.5.3_0 >= gcc45 4.5.3_0 |
|---|
| 293 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 294 | :debug:main gmp 5.0.2_1 exists in the ports tree |
|---|
| 295 | :debug:main gmp 5.0.2_1 is the latest installed |
|---|
| 296 | :debug:main gmp 5.0.2_1 is active |
|---|
| 297 | :debug:main Merging existing variants '' into variants |
|---|
| 298 | :debug:main new fully merged portvariants: |
|---|
| 299 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 300 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 301 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 302 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 303 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 304 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 305 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 306 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 307 | :debug:main No need to upgrade! gmp 5.0.2_1 >= gmp 5.0.2_1 |
|---|
| 308 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 309 | :debug:main mpfr 3.0.1-p3_0 exists in the ports tree |
|---|
| 310 | :debug:main mpfr 3.0.1-p3_0 is the latest installed |
|---|
| 311 | :debug:main mpfr 3.0.1-p3_0 is active |
|---|
| 312 | :debug:main Merging existing variants '' into variants |
|---|
| 313 | :debug:main new fully merged portvariants: |
|---|
| 314 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
|---|
| 315 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 316 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 317 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 319 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 320 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 321 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 322 | :debug:main No need to upgrade! mpfr 3.0.1-p3_0 >= mpfr 3.0.1-p3_0 |
|---|
| 323 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 324 | :debug:main libmpc 0.9_0 exists in the ports tree |
|---|
| 325 | :debug:main libmpc 0.9_0 is the latest installed |
|---|
| 326 | :debug:main libmpc 0.9_0 is active |
|---|
| 327 | :debug:main Merging existing variants '' into variants |
|---|
| 328 | :debug:main new fully merged portvariants: |
|---|
| 329 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libmpc |
|---|
| 330 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 331 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 332 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 333 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 334 | :debug:main adding the default universal variant |
|---|
| 335 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 336 | :debug:main No need to upgrade! libmpc 0.9_0 >= libmpc 0.9_0 |
|---|
| 337 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 338 | :debug:main gcc_select 0.1_5 exists in the ports tree |
|---|
| 339 | :debug:main gcc_select 0.1_5 is the latest installed |
|---|
| 340 | :debug:main gcc_select 0.1_5 is active |
|---|
| 341 | :debug:main Merging existing variants '' into variants |
|---|
| 342 | :debug:main new fully merged portvariants: |
|---|
| 343 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/gcc_select |
|---|
| 344 | :debug:main OS darwin/11.0.0 (Mac OS X 10.7) arch i386 |
|---|
| 345 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 346 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 347 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 348 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 349 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 350 | :debug:main No need to upgrade! gcc_select 0.1_5 >= gcc_select 0.1_5 |
|---|
| 351 | :msg:main ---> Computing dependencies for pypy:info:main .:debug:main Searching for dependency: pkgconfig |
|---|
| 352 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 353 | :debug:main Searching for dependency: libffi |
|---|
| 354 | :debug:main Found Dependency: receipt exists for libffi |
|---|
| 355 | :debug:main Searching for dependency: python27 |
|---|
| 356 | :debug:main Found Dependency: receipt exists for python27 |
|---|
| 357 | :debug:main Searching for dependency: gcc45 |
|---|
| 358 | :debug:main Found Dependency: receipt exists for gcc45 |
|---|
| 359 | :msg:main |
|---|
| 360 | :debug:main Executing org.macports.main (pypy) |
|---|
| 361 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 362 | :debug:main egid changed to: 503 |
|---|
| 363 | :debug:main euid changed to: 504 |
|---|
| 364 | :debug:main Skipping completed org.macports.archivefetch (pypy) |
|---|
| 365 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 366 | :debug:main Skipping completed org.macports.fetch (pypy) |
|---|
| 367 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 368 | :debug:main Skipping completed org.macports.checksum (pypy) |
|---|
| 369 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 370 | :debug:main Skipping completed org.macports.extract (pypy) |
|---|
| 371 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 372 | :debug:main Skipping completed org.macports.patch (pypy) |
|---|
| 373 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 374 | :debug:main Skipping completed org.macports.configure (pypy) |
|---|
| 375 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 376 | :debug:build build phase started at Thu Aug 25 12:53:44 EDT 2011 |
|---|
| 377 | :notice:build ---> Building pypy |
|---|
| 378 | :debug:build Executing org.macports.build (pypy) |
|---|
| 379 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 380 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/goal" && arch -x86_64 /opt/local/bin/python2.7 translate.py --batch --cc=/opt/local/bin/gcc-mp-4.5 --opt=jit --make-jobs=8 --cflags='-m64 -I/opt/local/include -L/opt/local/lib' targetpypystandalone.py' |
|---|
| 381 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/goal" && arch -x86_64 /opt/local/bin/python2.7 translate.py --batch --cc=/opt/local/bin/gcc-mp-4.5 --opt=jit --make-jobs=8 --cflags='-m64 -I/opt/local/include -L/opt/local/lib' targetpypystandalone.py |
|---|
| 382 | :info:build [version:WARNING] Errors getting Mercurial information: Not running from a Mercurial repository! |
|---|
| 383 | :info:build [platform:msg] Setting platform to 'host' cc=/opt/local/bin/gcc-mp-4.5 |
|---|
| 384 | :info:build [translation:info] Translating target as defined by targetpypystandalone |
|---|
| 385 | :info:build [platform:execute] /opt/local/bin/gcc-mp-4.5 -c -arch x86_64 -O3 -fomit-frame-pointer -mdynamic-no-pic /tmp/usession-unknown-10/gcctest.c -o /tmp/usession-unknown-10/gcctest.o |
|---|
| 386 | :info:build [platform:Error] cc1: error: unrecognized command line option "-arch" |
|---|
| 387 | :info:build Traceback (most recent call last): |
|---|
| 388 | :info:build File "translate.py", line 324, in <module> |
|---|
| 389 | :info:build main() |
|---|
| 390 | :info:build File "translate.py", line 210, in main |
|---|
| 391 | :info:build targetspec_dic, translateconfig, config, args = parse_options_and_load_target() |
|---|
| 392 | :info:build File "translate.py", line 178, in parse_options_and_load_target |
|---|
| 393 | :info:build targetspec_dic['handle_config'](config, translateconfig) |
|---|
| 394 | :info:build File "targetpypystandalone.py", line 123, in handle_config |
|---|
| 395 | :info:build from pypy.objspace.std import multimethod |
|---|
| 396 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/objspace/std/__init__.py", line 1, in <module> |
|---|
| 397 | :info:build from pypy.objspace.std.objspace import StdObjSpace |
|---|
| 398 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/objspace/std/objspace.py", line 7, in <module> |
|---|
| 399 | :info:build from pypy.objspace.std import (builtinshortcut, stdtypedef, frame, model, |
|---|
| 400 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/objspace/std/builtinshortcut.py", line 3, in <module> |
|---|
| 401 | :info:build from pypy.objspace.descroperation import DescrOperation |
|---|
| 402 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/objspace/descroperation.py", line 8, in <module> |
|---|
| 403 | :info:build from pypy.module.__builtin__.interp_classobj import W_InstanceObject |
|---|
| 404 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/module/__builtin__/__init__.py", line 4, in <module> |
|---|
| 405 | :info:build import pypy.module.imp.importing |
|---|
| 406 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/module/imp/importing.py", line 14, in <module> |
|---|
| 407 | :info:build from pypy.rlib import streamio, jit |
|---|
| 408 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rlib/streamio.py", line 43, in <module> |
|---|
| 409 | :info:build from pypy.rlib import rposix |
|---|
| 410 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rlib/rposix.py", line 2, in <module> |
|---|
| 411 | :info:build from pypy.rpython.lltypesystem.rffi import CConstant, CExternVariable, INT |
|---|
| 412 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/lltypesystem/rffi.py", line 459, in <module> |
|---|
| 413 | :info:build NUMBER_TYPES = setup() |
|---|
| 414 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/lltypesystem/rffi.py", line 448, in setup |
|---|
| 415 | :info:build names = populate_inttypes() |
|---|
| 416 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/lltypesystem/rffi.py", line 442, in populate_inttypes |
|---|
| 417 | :info:build platform.populate_inttypes(populatelist) |
|---|
| 418 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/tool/rfficache.py", line 82, in populate_inttypes |
|---|
| 419 | :info:build sizes = sizeof_c_types(names_c, **kwds) |
|---|
| 420 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/tool/rfficache.py", line 44, in sizeof_c_types |
|---|
| 421 | :info:build answer = ask_gcc(question, **kwds) |
|---|
| 422 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/rpython/tool/rfficache.py", line 34, in ask_gcc |
|---|
| 423 | :info:build return build_executable_cache([c_file], eci) |
|---|
| 424 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/tool/gcc_cache.py", line 27, in build_executable_cache |
|---|
| 425 | :info:build result = platform.execute(platform.compile(c_files, eci)) |
|---|
| 426 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/platform/__init__.py", line 51, in compile |
|---|
| 427 | :info:build ofiles = self._compile_o_files(cfiles, eci, standalone) |
|---|
| 428 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/platform/__init__.py", line 60, in _compile_o_files |
|---|
| 429 | :info:build ofiles.append(self._compile_c_file(self.cc, cfile, compile_args)) |
|---|
| 430 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/platform/posix.py", line 38, in _compile_c_file |
|---|
| 431 | :info:build cwd=str(cfile.dirpath())) |
|---|
| 432 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/platform/__init__.py", line 118, in _execute_c_compiler |
|---|
| 433 | :info:build self._handle_error(returncode, stdout, stderr, outname) |
|---|
| 434 | :info:build File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/platform/__init__.py", line 130, in _handle_error |
|---|
| 435 | :info:build raise CompilationError(stdout, stderr) |
|---|
| 436 | :info:build pypy.translator.platform.CompilationError: CompilationError(err=""" |
|---|
| 437 | :info:build cc1: error: unrecognized command line option "-arch" |
|---|
| 438 | :info:build """) |
|---|
| 439 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/work/pypy-pypy-release-1.6/pypy/translator/goal" && arch -x86_64 /opt/local/bin/python2.7 translate.py --batch --cc=/opt/local/bin/gcc-mp-4.5 --opt=jit --make-jobs=8 --cflags='-m64 -I/opt/local/include -L/opt/local/lib' targetpypystandalone.py " returned error 1 |
|---|
| 440 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 441 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 442 | while executing |
|---|
| 443 | "command_exec build" |
|---|
| 444 | (procedure "portbuild::build_main" line 8) |
|---|
| 445 | invoked from within |
|---|
| 446 | "$procedure $targetname" |
|---|
| 447 | :info:build Warning: the following items did not execute (for pypy): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 448 | :notice:build Log for pypy is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/pypy/main.log |
|---|
