| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.26_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.26_0 +universal is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.26_0 +universal is active |
|---|
| 6 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: universal + |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main Executing variant universal provides universal |
|---|
| 16 | :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 |
|---|
| 17 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 18 | :debug:main glib2 2.30.2_1 exists in the ports tree |
|---|
| 19 | :debug:main glib2 2.30.2_1 +universal is the latest installed |
|---|
| 20 | :debug:main glib2 2.30.2_1 +universal is active |
|---|
| 21 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 22 | :debug:main new fully merged portvariants: universal + |
|---|
| 23 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 |
|---|
| 24 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 25 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 29 | :debug:main adding the default universal variant |
|---|
| 30 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 31 | :debug:main Executing variant universal provides universal |
|---|
| 32 | :debug:main No need to upgrade! glib2 2.30.2_1 >= glib2 2.30.2_1 |
|---|
| 33 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 34 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 35 | :debug:main gettext 0.18.1.1_2 +universal is the latest installed |
|---|
| 36 | :debug:main gettext 0.18.1.1_2 +universal is active |
|---|
| 37 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 38 | :debug:main new fully merged portvariants: universal + |
|---|
| 39 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 40 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 41 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 44 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 45 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 46 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 47 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 48 | :debug:main Executing variant universal provides universal |
|---|
| 49 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 50 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 51 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 52 | :debug:main libiconv 1.14_0 +universal is the latest installed |
|---|
| 53 | :debug:main libiconv 1.14_0 +universal is active |
|---|
| 54 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 55 | :debug:main new fully merged portvariants: universal + |
|---|
| 56 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 57 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 58 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 59 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 60 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 61 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 62 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 63 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 64 | :debug:main Executing variant universal provides universal |
|---|
| 65 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 66 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 67 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 68 | :debug:main ncurses 5.9_1 +universal is the latest installed |
|---|
| 69 | :debug:main ncurses 5.9_1 +universal is active |
|---|
| 70 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 71 | :debug:main new fully merged portvariants: universal + |
|---|
| 72 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 73 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 74 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 77 | :debug:main adding the default universal variant |
|---|
| 78 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 79 | :debug:main Executing variant universal provides universal |
|---|
| 80 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 81 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 82 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 83 | :debug:main expat 2.0.1_1 +universal is the latest installed |
|---|
| 84 | :debug:main expat 2.0.1_1 +universal is active |
|---|
| 85 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 86 | :debug:main new fully merged portvariants: universal + |
|---|
| 87 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 88 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 89 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 90 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 91 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 92 | :debug:main adding the default universal variant |
|---|
| 93 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 94 | :debug:main Executing variant universal provides universal |
|---|
| 95 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 96 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 97 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 98 | :debug:main zlib 1.2.5_0 +universal is the latest installed |
|---|
| 99 | :debug:main zlib 1.2.5_0 +universal is active |
|---|
| 100 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 101 | :debug:main new fully merged portvariants: universal + |
|---|
| 102 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 103 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 104 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 107 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 108 | :debug:main adding the default universal variant |
|---|
| 109 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 110 | :debug:main Executing variant universal provides universal |
|---|
| 111 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 112 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 113 | :debug:main libffi 3.0.10_1 exists in the ports tree |
|---|
| 114 | :debug:main libffi 3.0.10_1 is the latest installed |
|---|
| 115 | :debug:main libffi 3.0.10_1 +universal is active |
|---|
| 116 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 117 | :debug:main new fully merged portvariants: universal + |
|---|
| 118 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi |
|---|
| 119 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 120 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 123 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 124 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 125 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 126 | :debug:main Executing variant universal provides universal |
|---|
| 127 | :debug:main No need to upgrade! libffi 3.0.10_1 >= libffi 3.0.10_1 |
|---|
| 128 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 129 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 130 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 131 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 132 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 133 | :debug:main new fully merged portvariants: perl5_12 + |
|---|
| 134 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 135 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 136 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 137 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 138 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 139 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 140 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 141 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 142 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 143 | :debug:main perl5.12 5.12.3_2 exists in the ports tree |
|---|
| 144 | :debug:main perl5.12 5.12.3_2 is the latest installed |
|---|
| 145 | :debug:main perl5.12 5.12.3_2 +universal is active |
|---|
| 146 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 147 | :debug:main new fully merged portvariants: universal + |
|---|
| 148 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 |
|---|
| 149 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 150 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 151 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 152 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 153 | :debug:main adding the default universal variant |
|---|
| 154 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 155 | :debug:main Executing variant universal provides universal |
|---|
| 156 | :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 |
|---|
| 157 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 158 | :debug:main gdbm 1.10_0 exists in the ports tree |
|---|
| 159 | :debug:main gdbm 1.10_0 +universal is the latest installed |
|---|
| 160 | :debug:main gdbm 1.10_0 +universal is active |
|---|
| 161 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 162 | :debug:main new fully merged portvariants: universal + |
|---|
| 163 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 164 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 165 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 166 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 169 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 170 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 171 | :debug:main Executing variant universal provides universal |
|---|
| 172 | :debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0 |
|---|
| 173 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 174 | :debug:main curl 7.23.1_0 exists in the ports tree |
|---|
| 175 | :debug:main curl 7.23.1_0 +ssl is the latest installed |
|---|
| 176 | :debug:main curl 7.23.1_0 +ssl is active |
|---|
| 177 | :debug:main Merging existing variants '+ssl' into variants |
|---|
| 178 | :debug:main new fully merged portvariants: ssl + |
|---|
| 179 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl |
|---|
| 180 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 181 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 182 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 184 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 185 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 186 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 187 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 188 | :debug:main Executing variant ssl provides ssl |
|---|
| 189 | :debug:main No need to upgrade! curl 7.23.1_0 >= curl 7.23.1_0 |
|---|
| 190 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 191 | :debug:main libidn 1.22_0 exists in the ports tree |
|---|
| 192 | :debug:main libidn 1.22_0 is the latest installed |
|---|
| 193 | :debug:main libidn 1.22_0 is active |
|---|
| 194 | :debug:main Merging existing variants '' into variants |
|---|
| 195 | :debug:main new fully merged portvariants: |
|---|
| 196 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn |
|---|
| 197 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 198 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 200 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 201 | :debug:main adding the default universal variant |
|---|
| 202 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 203 | :debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0 |
|---|
| 204 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 205 | :debug:main openssl 1.0.0e_1 exists in the ports tree |
|---|
| 206 | :debug:main openssl 1.0.0e_1 +universal is the latest installed |
|---|
| 207 | :debug:main openssl 1.0.0e_1 +universal is active |
|---|
| 208 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 209 | :debug:main new fully merged portvariants: universal + |
|---|
| 210 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 211 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 212 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 215 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 216 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 217 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 218 | :debug:main Executing variant universal provides universal |
|---|
| 219 | :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 |
|---|
| 220 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 221 | :debug:main curl-ca-bundle 7.23.1_0 exists in the ports tree |
|---|
| 222 | :debug:main curl-ca-bundle 7.23.1_0 is the latest installed |
|---|
| 223 | :debug:main curl-ca-bundle 7.23.1_0 is active |
|---|
| 224 | :debug:main Merging existing variants '' into variants |
|---|
| 225 | :debug:main new fully merged portvariants: |
|---|
| 226 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle |
|---|
| 227 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 228 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 229 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 230 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 231 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 232 | :debug:main No need to upgrade! curl-ca-bundle 7.23.1_0 >= curl-ca-bundle 7.23.1_0 |
|---|
| 233 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 234 | :debug:main gtk2 2.24.8_1 exists in the ports tree |
|---|
| 235 | :debug:main gtk2 2.24.8_1 +universal+x11 is the latest installed |
|---|
| 236 | :debug:main gtk2 2.24.8_1 +universal+x11 is active |
|---|
| 237 | :debug:main Merging existing variants '+universal+x11' into variants |
|---|
| 238 | :debug:main new fully merged portvariants: universal + x11 + |
|---|
| 239 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2 |
|---|
| 240 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 241 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 242 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 243 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 244 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 245 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 246 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 247 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 248 | :debug:main Executing variant universal provides universal |
|---|
| 249 | :debug:main Executing variant x11 provides x11 |
|---|
| 250 | :debug:main No need to upgrade! gtk2 2.24.8_1 >= gtk2 2.24.8_1 |
|---|
| 251 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 252 | :debug:main atk 1.32.0_0 exists in the ports tree |
|---|
| 253 | :debug:main atk 1.32.0_0 is the latest installed |
|---|
| 254 | :debug:main atk 1.32.0_0 +universal is active |
|---|
| 255 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 256 | :debug:main new fully merged portvariants: universal + |
|---|
| 257 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk |
|---|
| 258 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 259 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 260 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 261 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 262 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 263 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 264 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 265 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 266 | :debug:main Executing variant universal provides universal |
|---|
| 267 | :debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0 |
|---|
| 268 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 269 | :debug:main pango 1.28.4_2 exists in the ports tree |
|---|
| 270 | :debug:main pango 1.28.4_2 +universal+x11 is the latest installed |
|---|
| 271 | :debug:main pango 1.28.4_2 +universal+x11 is active |
|---|
| 272 | :debug:main Merging existing variants '+universal+x11' into variants |
|---|
| 273 | :debug:main new fully merged portvariants: universal + x11 + |
|---|
| 274 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango |
|---|
| 275 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 276 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 277 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 278 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 279 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 280 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 281 | :debug:main adding the default universal variant |
|---|
| 282 | :debug:main Executing variant x11 provides x11 |
|---|
| 283 | :debug:main Executing variant universal provides universal |
|---|
| 284 | :debug:main No need to upgrade! pango 1.28.4_2 >= pango 1.28.4_2 |
|---|
| 285 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 286 | :debug:main cairo 1.10.2_4 exists in the ports tree |
|---|
| 287 | :debug:main cairo 1.10.2_4 +universal+x11 is the latest installed |
|---|
| 288 | :debug:main cairo 1.10.2_4 +universal+x11 is active |
|---|
| 289 | :debug:main Merging existing variants '+universal+x11' into variants |
|---|
| 290 | :debug:main new fully merged portvariants: universal + x11 + |
|---|
| 291 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
|---|
| 292 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 293 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 294 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 295 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 296 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 297 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 298 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 299 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 300 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 301 | :debug:main Executing variant universal provides universal |
|---|
| 302 | :debug:main Executing variant x11 provides x11 |
|---|
| 303 | :debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4 |
|---|
| 304 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 305 | :debug:main libpixman 0.24.0_0 exists in the ports tree |
|---|
| 306 | :debug:main libpixman 0.24.0_0 +universal is the latest installed |
|---|
| 307 | :debug:main libpixman 0.24.0_0 +universal is active |
|---|
| 308 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 309 | :debug:main new fully merged portvariants: universal + |
|---|
| 310 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
|---|
| 311 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 312 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 313 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 314 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 315 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 316 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 317 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 318 | :debug:main Executing variant universal provides universal |
|---|
| 319 | :debug:main No need to upgrade! libpixman 0.24.0_0 >= libpixman 0.24.0_0 |
|---|
| 320 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 321 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 322 | :debug:main fontconfig 2.8.0_0 +macosx+universal is the latest installed |
|---|
| 323 | :debug:main fontconfig 2.8.0_0 +macosx+universal is active |
|---|
| 324 | :debug:main Merging existing variants '+macosx+universal' into variants |
|---|
| 325 | :debug:main new fully merged portvariants: universal + macosx + |
|---|
| 326 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 327 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 328 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 329 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 331 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 332 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 333 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 334 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 335 | :debug:main Requested variant macosx is not provided by port fontconfig. |
|---|
| 336 | :debug:main Executing variant universal provides universal |
|---|
| 337 | :debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx+universal" do not match "+universal". |
|---|
| 338 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 339 | :debug:main freetype 2.4.8_0 exists in the ports tree |
|---|
| 340 | :debug:main freetype 2.4.8_0 +universal is the latest installed |
|---|
| 341 | :debug:main freetype 2.4.8_0 +universal is active |
|---|
| 342 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 343 | :debug:main new fully merged portvariants: universal + |
|---|
| 344 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 345 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 346 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 347 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 348 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 349 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 350 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 351 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 352 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 353 | :debug:main Executing variant universal provides universal |
|---|
| 354 | :debug:main No need to upgrade! freetype 2.4.8_0 >= freetype 2.4.8_0 |
|---|
| 355 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 356 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 357 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 358 | :debug:main bzip2 1.0.6_0 +universal is active |
|---|
| 359 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 360 | :debug:main new fully merged portvariants: universal + |
|---|
| 361 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 362 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 363 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 364 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 365 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 366 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 367 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 368 | :debug:main Executing variant universal provides universal |
|---|
| 369 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 370 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 371 | :debug:main libpng 1.4.8_0 exists in the ports tree |
|---|
| 372 | :debug:main libpng 1.4.8_0 +universal is the latest installed |
|---|
| 373 | :debug:main libpng 1.4.8_0 +universal is active |
|---|
| 374 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 375 | :debug:main new fully merged portvariants: universal + |
|---|
| 376 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 377 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 378 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 379 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 380 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 381 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 382 | :debug:main adding the default universal variant |
|---|
| 383 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 384 | :debug:main Executing variant universal provides universal |
|---|
| 385 | :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 |
|---|
| 386 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 387 | :debug:main xrender 0.9.6_1 exists in the ports tree |
|---|
| 388 | :debug:main xrender 0.9.6_1 +universal is the latest installed |
|---|
| 389 | :debug:main xrender 0.9.6_1 +universal is active |
|---|
| 390 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 391 | :debug:main new fully merged portvariants: universal + |
|---|
| 392 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 393 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 394 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 395 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 396 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 397 | :debug:main adding the default universal variant |
|---|
| 398 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 399 | :debug:main Executing variant universal provides universal |
|---|
| 400 | :debug:main No need to upgrade! xrender 0.9.6_1 >= xrender 0.9.6_1 |
|---|
| 401 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 402 | :debug:main xorg-libX11 1.4.4_0 exists in the ports tree |
|---|
| 403 | :debug:main xorg-libX11 1.4.4_0 +universal is the latest installed |
|---|
| 404 | :debug:main xorg-libX11 1.4.4_0 +universal is active |
|---|
| 405 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 406 | :debug:main new fully merged portvariants: universal + |
|---|
| 407 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 408 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 409 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 410 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 411 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 412 | :debug:main adding the default universal variant |
|---|
| 413 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 414 | :debug:main Executing variant universal provides universal |
|---|
| 415 | :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 |
|---|
| 416 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 417 | :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 418 | :debug:main xorg-libXdmcp 1.1.0_0 +universal is the latest installed |
|---|
| 419 | :debug:main xorg-libXdmcp 1.1.0_0 +universal is active |
|---|
| 420 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 421 | :debug:main new fully merged portvariants: universal + |
|---|
| 422 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 423 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 424 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 425 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 426 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 427 | :debug:main adding the default universal variant |
|---|
| 428 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 429 | :debug:main Executing variant universal provides universal |
|---|
| 430 | :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 431 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 432 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 433 | :debug:main xorg-libXau 1.0.6_0 +universal is the latest installed |
|---|
| 434 | :debug:main xorg-libXau 1.0.6_0 +universal is active |
|---|
| 435 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 436 | :debug:main new fully merged portvariants: universal + |
|---|
| 437 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 438 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 439 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 440 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 441 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 442 | :debug:main adding the default universal variant |
|---|
| 443 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 444 | :debug:main Executing variant universal provides universal |
|---|
| 445 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 446 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 447 | :debug:main xorg-xproto 7.0.22_0 exists in the ports tree |
|---|
| 448 | :debug:main xorg-xproto 7.0.22_0 is the latest installed |
|---|
| 449 | :debug:main xorg-xproto 7.0.22_0 is active |
|---|
| 450 | :debug:main Merging existing variants '' into variants |
|---|
| 451 | :debug:main new fully merged portvariants: |
|---|
| 452 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 453 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 454 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 455 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 456 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 457 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 458 | :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 |
|---|
| 459 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 460 | :debug:main xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 461 | :debug:main xorg-libxcb 1.7_0 +universal is the latest installed |
|---|
| 462 | :debug:main xorg-libxcb 1.7_0 +universal is active |
|---|
| 463 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 464 | :debug:main new fully merged portvariants: universal + |
|---|
| 465 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb |
|---|
| 466 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 467 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 468 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 469 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 470 | :debug:main adding the default universal variant |
|---|
| 471 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 472 | :debug:main Executing variant python27 provides python27 |
|---|
| 473 | :debug:main Executing variant universal provides universal |
|---|
| 474 | :debug:main Skipping upgrade since xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0, even though installed variants "+universal" do not match "+python27+universal". |
|---|
| 475 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 476 | :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 477 | :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed |
|---|
| 478 | :debug:main xorg-xcb-proto 1.6_0 +python26 is active |
|---|
| 479 | :debug:main Merging existing variants '+python26' into variants |
|---|
| 480 | :debug:main new fully merged portvariants: python26 + |
|---|
| 481 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto |
|---|
| 482 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 483 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 484 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 485 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 486 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 487 | :debug:main Executing variant python26 provides python26 |
|---|
| 488 | :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 489 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 490 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 491 | :debug:main libxml2 2.7.8_0 +universal is the latest installed |
|---|
| 492 | :debug:main libxml2 2.7.8_0 +universal is active |
|---|
| 493 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 494 | :debug:main new fully merged portvariants: universal + |
|---|
| 495 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 496 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 497 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 498 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 499 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 500 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 501 | :debug:main adding the default universal variant |
|---|
| 502 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 503 | :debug:main Executing variant universal provides universal |
|---|
| 504 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 505 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 506 | :debug:main python26 2.6.7_3 exists in the ports tree |
|---|
| 507 | :debug:main python26 2.6.7_3 is the latest installed |
|---|
| 508 | :debug:main python26 2.6.7_3 is active |
|---|
| 509 | :debug:main Merging existing variants '' into variants |
|---|
| 510 | :debug:main new fully merged portvariants: |
|---|
| 511 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 |
|---|
| 512 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 513 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 514 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 515 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 516 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 517 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 518 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 519 | :debug:main No need to upgrade! python26 2.6.7_3 >= python26 2.6.7_3 |
|---|
| 520 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 521 | :debug:main sqlite3 3.7.9_0 exists in the ports tree |
|---|
| 522 | :debug:main sqlite3 3.7.9_0 +universal is the latest installed |
|---|
| 523 | :debug:main sqlite3 3.7.9_0 +universal is active |
|---|
| 524 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 525 | :debug:main new fully merged portvariants: universal + |
|---|
| 526 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 527 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 528 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 529 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 530 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 531 | :debug:main adding the default universal variant |
|---|
| 532 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 533 | :debug:main Executing variant universal provides universal |
|---|
| 534 | :debug:main No need to upgrade! sqlite3 3.7.9_0 >= sqlite3 3.7.9_0 |
|---|
| 535 | :debug:main epoch: in tree: 20090923 installed: 20090923 |
|---|
| 536 | :debug:main libedit 20110802-3.0_0 exists in the ports tree |
|---|
| 537 | :debug:main libedit 20110802-3.0_0 is the latest installed |
|---|
| 538 | :debug:main libedit 20110802-3.0_0 +universal is active |
|---|
| 539 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 540 | :debug:main new fully merged portvariants: universal + |
|---|
| 541 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit |
|---|
| 542 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 543 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 544 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 545 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 546 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 547 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 548 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 549 | :debug:main Executing variant universal provides universal |
|---|
| 550 | :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 |
|---|
| 551 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 552 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 553 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 554 | :debug:main db46 4.6.21_6 is active |
|---|
| 555 | :debug:main Merging existing variants '' into variants |
|---|
| 556 | :debug:main new fully merged portvariants: |
|---|
| 557 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 558 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 559 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 560 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 561 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 562 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 563 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 564 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 565 | :debug:main Executing variant java provides java |
|---|
| 566 | :debug:main Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even though installed variants "" do not match "+java". |
|---|
| 567 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 568 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 569 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 570 | :debug:main python_select 0.3_1 is active |
|---|
| 571 | :debug:main Merging existing variants '' into variants |
|---|
| 572 | :debug:main new fully merged portvariants: |
|---|
| 573 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select |
|---|
| 574 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 575 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 576 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 577 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 578 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 579 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 580 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 581 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 582 | :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 583 | :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 584 | :debug:main xorg-libpthread-stubs 0.3_0 is active |
|---|
| 585 | :debug:main Merging existing variants '' into variants |
|---|
| 586 | :debug:main new fully merged portvariants: |
|---|
| 587 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 588 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 589 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 590 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 591 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 592 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 593 | :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 594 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 595 | :debug:main python27 2.7.2_3 exists in the ports tree |
|---|
| 596 | :debug:main python27 2.7.2_3 +universal is the latest installed |
|---|
| 597 | :debug:main python27 2.7.2_3 +universal is active |
|---|
| 598 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 599 | :debug:main new fully merged portvariants: universal + |
|---|
| 600 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 |
|---|
| 601 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 602 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 603 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 604 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 605 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 606 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 607 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 608 | :debug:main Executing variant universal provides universal |
|---|
| 609 | :debug:main No need to upgrade! python27 2.7.2_3 >= python27 2.7.2_3 |
|---|
| 610 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 611 | :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree |
|---|
| 612 | :debug:main xorg-kbproto 1.0.5_0 is the latest installed |
|---|
| 613 | :debug:main xorg-kbproto 1.0.5_0 is active |
|---|
| 614 | :debug:main Merging existing variants '' into variants |
|---|
| 615 | :debug:main new fully merged portvariants: |
|---|
| 616 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 617 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 618 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 619 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 620 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 621 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 622 | :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 |
|---|
| 623 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 624 | :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree |
|---|
| 625 | :debug:main xorg-renderproto 0.11.1_0 is the latest installed |
|---|
| 626 | :debug:main xorg-renderproto 0.11.1_0 is active |
|---|
| 627 | :debug:main Merging existing variants '' into variants |
|---|
| 628 | :debug:main new fully merged portvariants: |
|---|
| 629 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 630 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 631 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 632 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 633 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 634 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 635 | :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 |
|---|
| 636 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 637 | :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree |
|---|
| 638 | :debug:main xorg-xcb-util 0.3.8_0 is the latest installed |
|---|
| 639 | :debug:main xorg-xcb-util 0.3.8_0 +universal is active |
|---|
| 640 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 641 | :debug:main new fully merged portvariants: universal + |
|---|
| 642 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util |
|---|
| 643 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 644 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 645 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 646 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 647 | :debug:main adding the default universal variant |
|---|
| 648 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 649 | :debug:main Executing variant universal provides universal |
|---|
| 650 | :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util 0.3.8_0 |
|---|
| 651 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 652 | :debug:main Xft2 2.2.0_0 exists in the ports tree |
|---|
| 653 | :debug:main Xft2 2.2.0_0 is the latest installed |
|---|
| 654 | :debug:main Xft2 2.2.0_0 +universal is active |
|---|
| 655 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 656 | :debug:main new fully merged portvariants: universal + |
|---|
| 657 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 658 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 659 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 660 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 661 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 662 | :debug:main adding the default universal variant |
|---|
| 663 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 664 | :debug:main Executing variant universal provides universal |
|---|
| 665 | :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 |
|---|
| 666 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 667 | :debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree |
|---|
| 668 | :debug:main gdk-pixbuf2 2.22.1_1 is the latest installed |
|---|
| 669 | :debug:main gdk-pixbuf2 2.22.1_1 +universal is active |
|---|
| 670 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 671 | :debug:main new fully merged portvariants: universal + |
|---|
| 672 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gdk-pixbuf2 |
|---|
| 673 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 674 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 675 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 676 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 677 | :debug:main adding the default universal variant |
|---|
| 678 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 679 | :debug:main Executing variant universal provides universal |
|---|
| 680 | :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2 2.22.1_1 |
|---|
| 681 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 682 | :debug:main jasper 1.900.1_8 exists in the ports tree |
|---|
| 683 | :debug:main jasper 1.900.1_8 +universal is the latest installed |
|---|
| 684 | :debug:main jasper 1.900.1_8 +universal is active |
|---|
| 685 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 686 | :debug:main new fully merged portvariants: universal + |
|---|
| 687 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper |
|---|
| 688 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 689 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 690 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 691 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 692 | :debug:main adding the default universal variant |
|---|
| 693 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 694 | :debug:main Executing variant universal provides universal |
|---|
| 695 | :debug:main No need to upgrade! jasper 1.900.1_8 >= jasper 1.900.1_8 |
|---|
| 696 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 697 | :debug:main jpeg 8c_0 exists in the ports tree |
|---|
| 698 | :debug:main jpeg 8c_0 +universal is the latest installed |
|---|
| 699 | :debug:main jpeg 8c_0 +universal is active |
|---|
| 700 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 701 | :debug:main new fully merged portvariants: universal + |
|---|
| 702 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 703 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 704 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 705 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 706 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 707 | :debug:main adding the default universal variant |
|---|
| 708 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 709 | :debug:main Executing variant universal provides universal |
|---|
| 710 | :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 |
|---|
| 711 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 712 | :debug:main tiff 3.9.5_0 exists in the ports tree |
|---|
| 713 | :debug:main tiff 3.9.5_0 +universal is the latest installed |
|---|
| 714 | :debug:main tiff 3.9.5_0 +universal is active |
|---|
| 715 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 716 | :debug:main new fully merged portvariants: universal + |
|---|
| 717 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff |
|---|
| 718 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 719 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 720 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 721 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 722 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 723 | :debug:main adding the default universal variant |
|---|
| 724 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 725 | :debug:main Executing variant universal provides universal |
|---|
| 726 | :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 |
|---|
| 727 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 728 | :debug:main xorg-libXi 1.4.3_0 exists in the ports tree |
|---|
| 729 | :debug:main xorg-libXi 1.4.3_0 +universal is the latest installed |
|---|
| 730 | :debug:main xorg-libXi 1.4.3_0 +universal is active |
|---|
| 731 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 732 | :debug:main new fully merged portvariants: universal + |
|---|
| 733 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi |
|---|
| 734 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 735 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 736 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 737 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 738 | :debug:main adding the default universal variant |
|---|
| 739 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 740 | :debug:main Executing variant universal provides universal |
|---|
| 741 | :debug:main No need to upgrade! xorg-libXi 1.4.3_0 >= xorg-libXi 1.4.3_0 |
|---|
| 742 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 743 | :debug:main xorg-libXext 1.3.0_0 exists in the ports tree |
|---|
| 744 | :debug:main xorg-libXext 1.3.0_0 +universal is the latest installed |
|---|
| 745 | :debug:main xorg-libXext 1.3.0_0 +universal is active |
|---|
| 746 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 747 | :debug:main new fully merged portvariants: universal + |
|---|
| 748 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 749 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 750 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 751 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 752 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 753 | :debug:main adding the default universal variant |
|---|
| 754 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 755 | :debug:main Executing variant universal provides universal |
|---|
| 756 | :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 |
|---|
| 757 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 758 | :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree |
|---|
| 759 | :debug:main xorg-xextproto 7.2.0_0 is the latest installed |
|---|
| 760 | :debug:main xorg-xextproto 7.2.0_0 is active |
|---|
| 761 | :debug:main Merging existing variants '' into variants |
|---|
| 762 | :debug:main new fully merged portvariants: |
|---|
| 763 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 764 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 765 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 766 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 767 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 768 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 769 | :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 |
|---|
| 770 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 771 | :debug:main xorg-inputproto 2.0.99.1_0 exists in the ports tree |
|---|
| 772 | :debug:main xorg-inputproto 2.0.99.1_0 is the latest installed |
|---|
| 773 | :debug:main xorg-inputproto 2.0.99.1_0 is active |
|---|
| 774 | :debug:main Merging existing variants '' into variants |
|---|
| 775 | :debug:main new fully merged portvariants: |
|---|
| 776 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 777 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 778 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 779 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 780 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 781 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 782 | :debug:main No need to upgrade! xorg-inputproto 2.0.99.1_0 >= xorg-inputproto 2.0.99.1_0 |
|---|
| 783 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 784 | :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree |
|---|
| 785 | :debug:main xorg-libXrandr 1.3.2_0 +universal is the latest installed |
|---|
| 786 | :debug:main xorg-libXrandr 1.3.2_0 +universal is active |
|---|
| 787 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 788 | :debug:main new fully merged portvariants: universal + |
|---|
| 789 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr |
|---|
| 790 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 791 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 792 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 793 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 794 | :debug:main adding the default universal variant |
|---|
| 795 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 796 | :debug:main Executing variant universal provides universal |
|---|
| 797 | :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0 |
|---|
| 798 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 799 | :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree |
|---|
| 800 | :debug:main xorg-randrproto 1.3.2_0 is the latest installed |
|---|
| 801 | :debug:main xorg-randrproto 1.3.2_0 is active |
|---|
| 802 | :debug:main Merging existing variants '' into variants |
|---|
| 803 | :debug:main new fully merged portvariants: |
|---|
| 804 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto |
|---|
| 805 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 806 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 807 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 808 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 809 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 810 | :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0 |
|---|
| 811 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 812 | :debug:main xorg-libXcursor 1.1.12_0 exists in the ports tree |
|---|
| 813 | :debug:main xorg-libXcursor 1.1.12_0 +universal is the latest installed |
|---|
| 814 | :debug:main xorg-libXcursor 1.1.12_0 +universal is active |
|---|
| 815 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 816 | :debug:main new fully merged portvariants: universal + |
|---|
| 817 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor |
|---|
| 818 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 819 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 820 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 821 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 822 | :debug:main adding the default universal variant |
|---|
| 823 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 824 | :debug:main Executing variant universal provides universal |
|---|
| 825 | :debug:main No need to upgrade! xorg-libXcursor 1.1.12_0 >= xorg-libXcursor 1.1.12_0 |
|---|
| 826 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 827 | :debug:main xorg-libXfixes 5.0_0 exists in the ports tree |
|---|
| 828 | :debug:main xorg-libXfixes 5.0_0 +universal is the latest installed |
|---|
| 829 | :debug:main xorg-libXfixes 5.0_0 +universal is active |
|---|
| 830 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 831 | :debug:main new fully merged portvariants: universal + |
|---|
| 832 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes |
|---|
| 833 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 834 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 835 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 836 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 837 | :debug:main adding the default universal variant |
|---|
| 838 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 839 | :debug:main Executing variant universal provides universal |
|---|
| 840 | :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0 |
|---|
| 841 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 842 | :debug:main xorg-fixesproto 5.0_0 exists in the ports tree |
|---|
| 843 | :debug:main xorg-fixesproto 5.0_0 is the latest installed |
|---|
| 844 | :debug:main xorg-fixesproto 5.0_0 is active |
|---|
| 845 | :debug:main Merging existing variants '' into variants |
|---|
| 846 | :debug:main new fully merged portvariants: |
|---|
| 847 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto |
|---|
| 848 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 849 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 850 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 851 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 852 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 853 | :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 |
|---|
| 854 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 855 | :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree |
|---|
| 856 | :debug:main xorg-libXinerama 1.1.1_0 +universal is the latest installed |
|---|
| 857 | :debug:main xorg-libXinerama 1.1.1_0 +universal is active |
|---|
| 858 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 859 | :debug:main new fully merged portvariants: universal + |
|---|
| 860 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama |
|---|
| 861 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 862 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 863 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 864 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 865 | :debug:main adding the default universal variant |
|---|
| 866 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 867 | :debug:main Executing variant universal provides universal |
|---|
| 868 | :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0 |
|---|
| 869 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 870 | :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree |
|---|
| 871 | :debug:main xorg-xineramaproto 1.2.1_0 is the latest installed |
|---|
| 872 | :debug:main xorg-xineramaproto 1.2.1_0 is active |
|---|
| 873 | :debug:main Merging existing variants '' into variants |
|---|
| 874 | :debug:main new fully merged portvariants: |
|---|
| 875 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto |
|---|
| 876 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 877 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 878 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 879 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 880 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 881 | :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0 |
|---|
| 882 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 883 | :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree |
|---|
| 884 | :debug:main xorg-libXdamage 1.1.3_0 is the latest installed |
|---|
| 885 | :debug:main xorg-libXdamage 1.1.3_0 +universal is active |
|---|
| 886 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 887 | :debug:main new fully merged portvariants: universal + |
|---|
| 888 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage |
|---|
| 889 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 890 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 891 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 892 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 893 | :debug:main adding the default universal variant |
|---|
| 894 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 895 | :debug:main Executing variant universal provides universal |
|---|
| 896 | :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0 |
|---|
| 897 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 898 | :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree |
|---|
| 899 | :debug:main xorg-damageproto 1.2.1_0 is the latest installed |
|---|
| 900 | :debug:main xorg-damageproto 1.2.1_0 is active |
|---|
| 901 | :debug:main Merging existing variants '' into variants |
|---|
| 902 | :debug:main new fully merged portvariants: |
|---|
| 903 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto |
|---|
| 904 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 905 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 906 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 907 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 908 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 909 | :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0 |
|---|
| 910 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 911 | :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree |
|---|
| 912 | :debug:main xorg-libXcomposite 0.4.3_0 +universal is the latest installed |
|---|
| 913 | :debug:main xorg-libXcomposite 0.4.3_0 +universal is active |
|---|
| 914 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 915 | :debug:main new fully merged portvariants: universal + |
|---|
| 916 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite |
|---|
| 917 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 918 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 919 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 920 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 921 | :debug:main adding the default universal variant |
|---|
| 922 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 923 | :debug:main Executing variant universal provides universal |
|---|
| 924 | :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0 |
|---|
| 925 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 926 | :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree |
|---|
| 927 | :debug:main xorg-compositeproto 0.4.2_0 is the latest installed |
|---|
| 928 | :debug:main xorg-compositeproto 0.4.2_0 is active |
|---|
| 929 | :debug:main Merging existing variants '' into variants |
|---|
| 930 | :debug:main new fully merged portvariants: |
|---|
| 931 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto |
|---|
| 932 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 933 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 934 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 935 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 936 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 937 | :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0 |
|---|
| 938 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 939 | :debug:main shared-mime-info 0.91_0 exists in the ports tree |
|---|
| 940 | :debug:main shared-mime-info 0.91_0 +universal is the latest installed |
|---|
| 941 | :debug:main shared-mime-info 0.91_0 +universal is active |
|---|
| 942 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 943 | :debug:main new fully merged portvariants: universal + |
|---|
| 944 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info |
|---|
| 945 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 946 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 947 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 948 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 949 | :debug:main adding the default universal variant |
|---|
| 950 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 951 | :debug:main Executing variant universal provides universal |
|---|
| 952 | :debug:main No need to upgrade! shared-mime-info 0.91_0 >= shared-mime-info 0.91_0 |
|---|
| 953 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 954 | :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree |
|---|
| 955 | :debug:main hicolor-icon-theme 0.12_0 is the latest installed |
|---|
| 956 | :debug:main hicolor-icon-theme 0.12_0 is active |
|---|
| 957 | :debug:main Merging existing variants '' into variants |
|---|
| 958 | :debug:main new fully merged portvariants: |
|---|
| 959 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme |
|---|
| 960 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 961 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 962 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 963 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 964 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 965 | :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0 |
|---|
| 966 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 967 | :debug:main lcms 1.19_2 exists in the ports tree |
|---|
| 968 | :debug:main lcms 1.19_2 +universal is the latest installed |
|---|
| 969 | :debug:main lcms 1.19_2 +universal is active |
|---|
| 970 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 971 | :debug:main new fully merged portvariants: universal + |
|---|
| 972 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms |
|---|
| 973 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 974 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 975 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 976 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 977 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 978 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 979 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 980 | :debug:main Executing variant universal provides universal |
|---|
| 981 | :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 |
|---|
| 982 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 983 | :debug:main openjpeg 1.4-r697_1 exists in the ports tree |
|---|
| 984 | :debug:main openjpeg 1.4-r697_1 is the latest installed |
|---|
| 985 | :debug:main openjpeg 1.4-r697_1 is active |
|---|
| 986 | :debug:main Merging existing variants '' into variants |
|---|
| 987 | :debug:main new fully merged portvariants: |
|---|
| 988 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg |
|---|
| 989 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 990 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 991 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 992 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 993 | :debug:main adding the default universal variant |
|---|
| 994 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 995 | :debug:main No need to upgrade! openjpeg 1.4-r697_1 >= openjpeg 1.4-r697_1 |
|---|
| 996 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 997 | :debug:main lcms2 2.2_0 exists in the ports tree |
|---|
| 998 | :debug:main lcms2 2.2_0 is the latest installed |
|---|
| 999 | :debug:main lcms2 2.2_0 is active |
|---|
| 1000 | :debug:main Merging existing variants '' into variants |
|---|
| 1001 | :debug:main new fully merged portvariants: |
|---|
| 1002 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms2 |
|---|
| 1003 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 1004 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1005 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1006 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1007 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 1008 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1009 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 1010 | :debug:main No need to upgrade! lcms2 2.2_0 >= lcms2 2.2_0 |
|---|
| 1011 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 1012 | :debug:main jbigkit 2.0_2 exists in the ports tree |
|---|
| 1013 | :debug:main jbigkit 2.0_2 is the latest installed |
|---|
| 1014 | :debug:main jbigkit 2.0_2 is active |
|---|
| 1015 | :debug:main Merging existing variants '' into variants |
|---|
| 1016 | :debug:main new fully merged portvariants: |
|---|
| 1017 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jbigkit |
|---|
| 1018 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 1019 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1020 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1021 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1022 | :debug:main adding the default universal variant |
|---|
| 1023 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1024 | :debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2 |
|---|
| 1025 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 1026 | :debug:main poppler-data 0.4.5_0 exists in the ports tree |
|---|
| 1027 | :debug:main poppler-data 0.4.5_0 is the latest installed |
|---|
| 1028 | :debug:main poppler-data 0.4.5_0 is active |
|---|
| 1029 | :debug:main Merging existing variants '' into variants |
|---|
| 1030 | :debug:main new fully merged portvariants: |
|---|
| 1031 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler-data |
|---|
| 1032 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 1033 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1034 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1035 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1036 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 1037 | :debug:main No need to upgrade! poppler-data 0.4.5_0 >= poppler-data 0.4.5_0 |
|---|
| 1038 | :msg:main ---> Computing dependencies for poppler:msg:main |
|---|
| 1039 | :debug:main Checking for conflicts against poppler |
|---|
| 1040 | :debug:main Searching for dependency: mupdf |
|---|
| 1041 | :debug:main Didn't find receipt, going to depspec regex for: mupdf |
|---|
| 1042 | :debug:main Searching for dependency: xpdf-tools |
|---|
| 1043 | :debug:main Didn't find receipt, going to depspec regex for: xpdf-tools |
|---|
| 1044 | :debug:main Searching for dependency: pkgconfig |
|---|
| 1045 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 1046 | :debug:main Searching for dependency: curl |
|---|
| 1047 | :debug:main Found Dependency: receipt exists for curl |
|---|
| 1048 | :debug:main Searching for dependency: gtk2 |
|---|
| 1049 | :debug:main Found Dependency: receipt exists for gtk2 |
|---|
| 1050 | :debug:main Searching for dependency: lcms |
|---|
| 1051 | :debug:main Found Dependency: receipt exists for lcms |
|---|
| 1052 | :debug:main Searching for dependency: openjpeg |
|---|
| 1053 | :debug:main Found Dependency: receipt exists for openjpeg |
|---|
| 1054 | :debug:main Searching for dependency: poppler-data |
|---|
| 1055 | :debug:main Found Dependency: receipt exists for poppler-data |
|---|
| 1056 | :debug:main Executing org.macports.main (poppler) |
|---|
| 1057 | :debug:archivefetch archivefetch phase started at Fri Nov 25 13:16:40 PST 2011 |
|---|
| 1058 | :msg:archivefetch ---> Fetching archive for poppler |
|---|
| 1059 | :debug:archivefetch Executing org.macports.archivefetch (poppler) |
|---|
| 1060 | :info:archivefetch ---> poppler-0.18.1_0.darwin_10.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/poppler |
|---|
| 1061 | :msg:archivefetch ---> Attempting to fetch poppler-0.18.1_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/poppler |
|---|
| 1062 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 1063 | :debug:fetch fetch phase started at Fri Nov 25 13:16:40 PST 2011 |
|---|
| 1064 | :notice:fetch ---> Fetching poppler |
|---|
| 1065 | :debug:fetch Executing org.macports.fetch (poppler) |
|---|
| 1066 | :info:fetch ---> poppler-0.18.1.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/poppler |
|---|
| 1067 | :debug:fetch Pinging poppler.freedesktop.org... |
|---|
| 1068 | :debug:fetch Pinging distfiles.macports.org... |
|---|
| 1069 | :debug:fetch Pinging aarnet.au.distfiles.macports.org... |
|---|
| 1070 | :debug:fetch Pinging her.gr.distfiles.macports.org... |
|---|
| 1071 | :debug:fetch Pinging jog.id.distfiles.macports.org... |
|---|
| 1072 | :debug:fetch Pinging lil.fr.distfiles.macports.org... |
|---|
| 1073 | :debug:fetch Pinging sea.us.distfiles.macports.org... |
|---|
| 1074 | :debug:fetch Pinging ykf.ca.distfiles.macports.org... |
|---|
| 1075 | :debug:fetch poppler.freedesktop.org ping time is 7.812 |
|---|
| 1076 | :debug:fetch distfiles.macports.org ping time is 39.934 |
|---|
| 1077 | :debug:fetch aarnet.au.distfiles.macports.org ping time is 166.878 |
|---|
| 1078 | :debug:fetch her.gr.distfiles.macports.org ping time is 223.153 |
|---|
| 1079 | :debug:fetch jog.id.distfiles.macports.org ping time is 242.366 |
|---|
| 1080 | :debug:fetch lil.fr.distfiles.macports.org ping time is 157.340 |
|---|
| 1081 | :debug:fetch sea.us.distfiles.macports.org ping time is 10000 |
|---|
| 1082 | :debug:fetch ykf.ca.distfiles.macports.org ping time is 60.061 |
|---|
| 1083 | :notice:fetch ---> Attempting to fetch poppler-0.18.1.tar.gz from http://poppler.freedesktop.org/ |
|---|
| 1084 | :debug:checksum checksum phase started at Fri Nov 25 13:16:44 PST 2011 |
|---|
| 1085 | :notice:checksum ---> Verifying checksum(s) for poppler |
|---|
| 1086 | :debug:checksum Executing org.macports.checksum (poppler) |
|---|
| 1087 | :info:checksum ---> Checksumming poppler-0.18.1.tar.gz |
|---|
| 1088 | :debug:checksum Correct (sha1) checksum for poppler-0.18.1.tar.gz |
|---|
| 1089 | :debug:checksum Correct (rmd160) checksum for poppler-0.18.1.tar.gz |
|---|
| 1090 | :debug:extract extract phase started at Fri Nov 25 13:16:44 PST 2011 |
|---|
| 1091 | :notice:extract ---> Extracting poppler |
|---|
| 1092 | :debug:extract Executing org.macports.extract (poppler) |
|---|
| 1093 | :info:extract ---> Extracting poppler-0.18.1.tar.gz |
|---|
| 1094 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz' |
|---|
| 1095 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 1096 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 1097 | :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - |
|---|
| 1098 | :debug:patch patch phase started at Fri Nov 25 13:16:44 PST 2011 |
|---|
| 1099 | :debug:patch Executing org.macports.patch (poppler) |
|---|
| 1100 | :debug:patch Executing proc-post-org.macports.patch-patch-0 |
|---|
| 1101 | :debug:configure configure phase started at Fri Nov 25 13:16:45 PST 2011 |
|---|
| 1102 | :notice:configure ---> Configuring poppler |
|---|
| 1103 | :debug:configure Using compiler 'Mac OS X gcc 4.2' |
|---|
| 1104 | :debug:configure Executing org.macports.configure (poppler) |
|---|
| 1105 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' |
|---|
| 1106 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && ./configure --prefix=/opt/local --disable-introspection --disable-poppler-qt --disable-poppler-qt4 --enable-xpdf-headers --enable-zlib --enable-libcurl --mandir=/opt/local/share/man --x-includes=/opt/local/include --x-libraries=/opt/local/lib' |
|---|
| 1107 | :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && ./configure --prefix=/opt/local --disable-introspection --disable-poppler-qt --disable-poppler-qt4 --enable-xpdf-headers --enable-zlib --enable-libcurl --mandir=/opt/local/share/man --x-includes=/opt/local/include --x-libraries=/opt/local/lib |
|---|
| 1108 | :info:configure configure: WARNING: unrecognized options: --disable-poppler-qt |
|---|
| 1109 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 1110 | :info:configure checking whether build environment is sane... yes |
|---|
| 1111 | :info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p |
|---|
| 1112 | :info:configure checking for gawk... no |
|---|
| 1113 | :info:configure checking for mawk... no |
|---|
| 1114 | :info:configure checking for nawk... no |
|---|
| 1115 | :info:configure checking for awk... awk |
|---|
| 1116 | :info:configure checking whether make sets $(MAKE)... yes |
|---|
| 1117 | :info:configure checking for style of include used by make... GNU |
|---|
| 1118 | :info:configure checking for gcc... /usr/bin/gcc-4.2 |
|---|
| 1119 | :info:configure checking whether the C compiler works... yes |
|---|
| 1120 | :info:configure checking for C compiler default output file name... a.out |
|---|
| 1121 | :info:configure checking for suffix of executables... |
|---|
| 1122 | :info:configure checking whether we are cross compiling... no |
|---|
| 1123 | :info:configure checking for suffix of object files... o |
|---|
| 1124 | :info:configure checking whether we are using the GNU C compiler... yes |
|---|
| 1125 | :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes |
|---|
| 1126 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed |
|---|
| 1127 | :info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3 |
|---|
| 1128 | :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
|---|
| 1129 | :info:configure checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 1130 | :info:configure checking for egrep... /usr/bin/grep -E |
|---|
| 1131 | :info:configure checking for ANSI C header files... yes |
|---|
| 1132 | :info:configure checking for sys/types.h... yes |
|---|
| 1133 | :info:configure checking for sys/stat.h... yes |
|---|
| 1134 | :info:configure checking for stdlib.h... yes |
|---|
| 1135 | :info:configure checking for string.h... yes |
|---|
| 1136 | :info:configure checking for memory.h... yes |
|---|
| 1137 | :info:configure checking for strings.h... yes |
|---|
| 1138 | :info:configure checking for inttypes.h... yes |
|---|
| 1139 | :info:configure checking for stdint.h... yes |
|---|
| 1140 | :info:configure checking for unistd.h... yes |
|---|
| 1141 | :info:configure checking whether byte ordering is bigendian... no |
|---|
| 1142 | :info:configure checking build system type... x86_64-apple-darwin10.8.0 |
|---|
| 1143 | :info:configure checking host system type... x86_64-apple-darwin10.8.0 |
|---|
| 1144 | :info:configure checking how to print strings... printf |
|---|
| 1145 | :info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed |
|---|
| 1146 | :info:configure checking for fgrep... /usr/bin/grep -F |
|---|
| 1147 | :info:configure checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
|---|
| 1148 | :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
|---|
| 1149 | :info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm |
|---|
| 1150 | :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm |
|---|
| 1151 | :info:configure checking whether ln -s works... yes |
|---|
| 1152 | :info:configure checking the maximum length of command line arguments... 196608 |
|---|
| 1153 | :info:configure checking whether the shell understands some XSI constructs... yes |
|---|
| 1154 | :info:configure checking whether the shell understands "+="... yes |
|---|
| 1155 | :info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64-apple-darwin10.8.0 format... func_convert_file_noop |
|---|
| 1156 | :info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain format... func_convert_file_noop |
|---|
| 1157 | :info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r |
|---|
| 1158 | :info:configure checking for objdump... objdump |
|---|
| 1159 | :info:configure checking how to recognize dependent libraries... pass_all |
|---|
| 1160 | :info:configure checking for dlltool... dlltool |
|---|
| 1161 | :info:configure checking how to associate runtime and link libraries... printf %s\n |
|---|
| 1162 | :info:configure checking for ar... ar |
|---|
| 1163 | :info:configure checking for archiver @FILE support... no |
|---|
| 1164 | :info:configure checking for strip... strip |
|---|
| 1165 | :info:configure checking for ranlib... ranlib |
|---|
| 1166 | :info:configure checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok |
|---|
| 1167 | :info:configure checking for sysroot... no |
|---|
| 1168 | :info:configure checking for mt... no |
|---|
| 1169 | :info:configure checking if : is a manifest tool... no |
|---|
| 1170 | :info:configure checking for dsymutil... dsymutil |
|---|
| 1171 | :info:configure checking for nmedit... nmedit |
|---|
| 1172 | :info:configure checking for lipo... lipo |
|---|
| 1173 | :info:configure checking for otool... otool |
|---|
| 1174 | :info:configure checking for otool64... no |
|---|
| 1175 | :info:configure checking for -single_module linker flag... yes |
|---|
| 1176 | :info:configure checking for -exported_symbols_list linker flag... yes |
|---|
| 1177 | :info:configure checking for -force_load linker flag... yes |
|---|
| 1178 | :info:configure checking for dlfcn.h... yes |
|---|
| 1179 | :info:configure checking for objdir... .libs |
|---|
| 1180 | :info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no |
|---|
| 1181 | :info:configure checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common -DPIC |
|---|
| 1182 | :info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC works... yes |
|---|
| 1183 | :info:configure checking if /usr/bin/gcc-4.2 static flag -static works... no |
|---|
| 1184 | :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes |
|---|
| 1185 | :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... (cached) yes |
|---|
| 1186 | :info:configure checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1187 | :info:configure checking dynamic linker characteristics... darwin10.8.0 dyld |
|---|
| 1188 | :info:configure checking how to hardcode library paths into programs... immediate |
|---|
| 1189 | :info:configure checking whether stripping libraries is possible... yes |
|---|
| 1190 | :info:configure checking if libtool supports shared libraries... yes |
|---|
| 1191 | :info:configure checking whether to build shared libraries... yes |
|---|
| 1192 | :info:configure checking whether to build static libraries... yes |
|---|
| 1193 | :info:configure checking for gcc... (cached) /usr/bin/gcc-4.2 |
|---|
| 1194 | :info:configure checking whether we are using the GNU C compiler... (cached) yes |
|---|
| 1195 | :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes |
|---|
| 1196 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none needed |
|---|
| 1197 | :info:configure checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3 |
|---|
| 1198 | :info:configure checking whether we are using the GNU C++ compiler... yes |
|---|
| 1199 | :info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes |
|---|
| 1200 | :info:configure checking dependency style of /usr/bin/g++-4.2... gcc3 |
|---|
| 1201 | :info:configure checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E |
|---|
| 1202 | :info:configure checking for ld used by /usr/bin/g++-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
|---|
| 1203 | :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
|---|
| 1204 | :info:configure checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1205 | :info:configure checking for /usr/bin/g++-4.2 option to produce PIC... -fno-common -DPIC |
|---|
| 1206 | :info:configure checking if /usr/bin/g++-4.2 PIC flag -fno-common -DPIC works... yes |
|---|
| 1207 | :info:configure checking if /usr/bin/g++-4.2 static flag -static works... no |
|---|
| 1208 | :info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o... yes |
|---|
| 1209 | :info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o... (cached) yes |
|---|
| 1210 | :info:configure checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1211 | :info:configure checking dynamic linker characteristics... darwin10.8.0 dyld |
|---|
| 1212 | :info:configure checking how to hardcode library paths into programs... immediate |
|---|
| 1213 | :info:configure checking for library containing strerror... none required |
|---|
| 1214 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C99... -std=gnu99 |
|---|
| 1215 | :info:configure checking for /usr/bin/gcc-4.2 -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 |
|---|
| 1216 | :info:configure checking whether we are using the GNU C++ compiler... (cached) yes |
|---|
| 1217 | :info:configure checking whether /usr/bin/g++-4.2 accepts -g... (cached) yes |
|---|
| 1218 | :info:configure checking dependency style of /usr/bin/g++-4.2... (cached) gcc3 |
|---|
| 1219 | :info:configure checking for pkg-config... /opt/local/bin/pkg-config |
|---|
| 1220 | :info:configure checking pkg-config is at least version 0.9.0... yes |
|---|
| 1221 | :info:configure checking for the pthreads library -lpthreads... no |
|---|
| 1222 | :info:configure checking whether pthreads work without any flags... yes |
|---|
| 1223 | :info:configure checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE |
|---|
| 1224 | :info:configure checking if more special flags are required for pthreads... -D_THREAD_SAFE |
|---|
| 1225 | :info:configure checking for X... libraries /opt/local/lib, headers /opt/local/include |
|---|
| 1226 | :info:configure checking whether -R must be followed by a space... no |
|---|
| 1227 | :info:configure checking for gethostbyname... yes |
|---|
| 1228 | :info:configure checking for connect... yes |
|---|
| 1229 | :info:configure checking for remove... yes |
|---|
| 1230 | :info:configure checking for shmat... yes |
|---|
| 1231 | :info:configure checking for IceConnectionNumber in -lICE... yes |
|---|
| 1232 | :info:configure checking for dirent.h that defines DIR... yes |
|---|
| 1233 | :info:configure checking for library containing opendir... none required |
|---|
| 1234 | :info:configure checking for stdint.h... (cached) yes |
|---|
| 1235 | :info:configure checking whether gettimeofday is declared... yes |
|---|
| 1236 | :info:configure checking for gettimeofday... yes |
|---|
| 1237 | :info:configure checking for localtime_r... yes |
|---|
| 1238 | :info:configure checking for gmtime_r... yes |
|---|
| 1239 | :info:configure checking for gethostbyname... (cached) yes |
|---|
| 1240 | :info:configure checking for nanosleep... yes |
|---|
| 1241 | :info:configure checking for opj_cio_open in -lopenjpeg... yes |
|---|
| 1242 | :info:configure checking openjpeg.h usability... yes |
|---|
| 1243 | :info:configure checking openjpeg.h presence... yes |
|---|
| 1244 | :info:configure checking for openjpeg.h... yes |
|---|
| 1245 | :info:configure checking for TIFFOpen in -ltiff... yes |
|---|
| 1246 | :info:configure checking tiffio.h usability... yes |
|---|
| 1247 | :info:configure checking tiffio.h presence... yes |
|---|
| 1248 | :info:configure checking for tiffio.h... yes |
|---|
| 1249 | :info:configure checking for popen... yes |
|---|
| 1250 | :info:configure checking for mkstemp... yes |
|---|
| 1251 | :info:configure checking for mkstemps... yes |
|---|
| 1252 | :info:configure checking for special C compiler options needed for large files... no |
|---|
| 1253 | :info:configure checking for _FILE_OFFSET_BITS value needed for large files... no |
|---|
| 1254 | :info:configure checking for _LARGEFILE_SOURCE value needed for large files... no |
|---|
| 1255 | :info:configure checking for fseek64... no |
|---|
| 1256 | :info:configure checking for ftell64... no |
|---|
| 1257 | :info:configure checking for inflate in -lz... yes |
|---|
| 1258 | :info:configure checking zlib.h usability... yes |
|---|
| 1259 | :info:configure checking zlib.h presence... yes |
|---|
| 1260 | :info:configure checking for zlib.h... yes |
|---|
| 1261 | :info:configure checking for LIBCURL... yes |
|---|
| 1262 | :info:configure checking for libjpeg6b... no |
|---|
| 1263 | :info:configure checking for libjpeg... -ljpeg |
|---|
| 1264 | :info:configure checking jpeglib.h usability... yes |
|---|
| 1265 | :info:configure checking jpeglib.h presence... yes |
|---|
| 1266 | :info:configure checking for jpeglib.h... yes |
|---|
| 1267 | :info:configure checking for LIBPNG... yes |
|---|
| 1268 | :info:configure checking for FREETYPE... yes |
|---|
| 1269 | :info:configure checking which font configuration to use... fontconfig |
|---|
| 1270 | :info:configure checking for FONTCONFIG... yes |
|---|
| 1271 | :info:configure checking for CAIRO... yes |
|---|
| 1272 | :info:configure checking fcntl.h usability... yes |
|---|
| 1273 | :info:configure checking fcntl.h presence... yes |
|---|
| 1274 | :info:configure checking for fcntl.h... yes |
|---|
| 1275 | :info:configure checking sys/mman.h usability... yes |
|---|
| 1276 | :info:configure checking sys/mman.h presence... yes |
|---|
| 1277 | :info:configure checking for sys/mman.h... yes |
|---|
| 1278 | :info:configure checking for sys/stat.h... (cached) yes |
|---|
| 1279 | :info:configure checking for POPPLER_GLIB... yes |
|---|
| 1280 | :info:configure checking for gobject-introspection... no (disabled, use --enable-introspection to enable) |
|---|
| 1281 | :info:configure checking for glib-mkenums... /opt/local/bin/glib-mkenums |
|---|
| 1282 | :info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check |
|---|
| 1283 | :info:configure checking for gtkdoc-rebase... /opt/local/bin/gtkdoc-rebase |
|---|
| 1284 | :info:configure checking for gtkdoc-mkpdf... /opt/local/bin/gtkdoc-mkpdf |
|---|
| 1285 | :info:configure checking whether to build gtk-doc documentation... no |
|---|
| 1286 | :info:configure checking for iconv... yes |
|---|
| 1287 | :info:configure checking for working iconv... yes |
|---|
| 1288 | :info:configure checking how to link with libiconv... -liconv |
|---|
| 1289 | :info:configure checking for iconv declaration... |
|---|
| 1290 | :info:configure extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); |
|---|
| 1291 | :info:configure checking for GTK_TEST... yes |
|---|
| 1292 | :info:configure checking for LCMS... yes |
|---|
| 1293 | :info:configure configure: creating ./config.status |
|---|
| 1294 | :info:configure config.status: creating Makefile |
|---|
| 1295 | :info:configure config.status: creating goo/Makefile |
|---|
| 1296 | :info:configure config.status: creating fofi/Makefile |
|---|
| 1297 | :info:configure config.status: creating splash/Makefile |
|---|
| 1298 | :info:configure config.status: creating poppler/Makefile |
|---|
| 1299 | :info:configure config.status: creating utils/Makefile |
|---|
| 1300 | :info:configure config.status: creating glib/Makefile |
|---|
| 1301 | :info:configure config.status: creating glib/poppler-features.h |
|---|
| 1302 | :info:configure config.status: creating glib/reference/Makefile |
|---|
| 1303 | :info:configure config.status: creating glib/reference/version.xml |
|---|
| 1304 | :info:configure config.status: creating glib/demo/Makefile |
|---|
| 1305 | :info:configure config.status: creating test/Makefile |
|---|
| 1306 | :info:configure config.status: creating qt4/Makefile |
|---|
| 1307 | :info:configure config.status: creating qt4/src/Makefile |
|---|
| 1308 | :info:configure config.status: creating qt4/tests/Makefile |
|---|
| 1309 | :info:configure config.status: creating qt4/demos/Makefile |
|---|
| 1310 | :info:configure config.status: creating cpp/Makefile |
|---|
| 1311 | :info:configure config.status: creating cpp/poppler-version.h |
|---|
| 1312 | :info:configure config.status: creating cpp/tests/Makefile |
|---|
| 1313 | :info:configure config.status: creating poppler.pc |
|---|
| 1314 | :info:configure config.status: creating poppler-uninstalled.pc |
|---|
| 1315 | :info:configure config.status: creating poppler-cairo.pc |
|---|
| 1316 | :info:configure config.status: creating poppler-cairo-uninstalled.pc |
|---|
| 1317 | :info:configure config.status: creating poppler-splash.pc |
|---|
| 1318 | :info:configure config.status: creating poppler-splash-uninstalled.pc |
|---|
| 1319 | :info:configure config.status: creating poppler-glib.pc |
|---|
| 1320 | :info:configure config.status: creating poppler-glib-uninstalled.pc |
|---|
| 1321 | :info:configure config.status: creating poppler-qt4.pc |
|---|
| 1322 | :info:configure config.status: creating poppler-qt4-uninstalled.pc |
|---|
| 1323 | :info:configure config.status: creating poppler-cpp.pc |
|---|
| 1324 | :info:configure config.status: creating poppler-cpp-uninstalled.pc |
|---|
| 1325 | :info:configure config.status: creating config.h |
|---|
| 1326 | :info:configure config.status: creating poppler/poppler-config.h |
|---|
| 1327 | :info:configure config.status: executing depfiles commands |
|---|
| 1328 | :info:configure config.status: executing libtool commands |
|---|
| 1329 | :info:configure configure: WARNING: unrecognized options: --disable-poppler-qt |
|---|
| 1330 | :info:configure |
|---|
| 1331 | :info:configure Building poppler with support for: |
|---|
| 1332 | :info:configure font configuration: fontconfig |
|---|
| 1333 | :info:configure splash output: yes |
|---|
| 1334 | :info:configure cairo output: yes |
|---|
| 1335 | :info:configure qt4 wrapper: no |
|---|
| 1336 | :info:configure glib wrapper: yes |
|---|
| 1337 | :info:configure introspection: no (disabled, use --enable-introspection to enable) |
|---|
| 1338 | :info:configure cpp wrapper: yes |
|---|
| 1339 | :info:configure use gtk-doc: no |
|---|
| 1340 | :info:configure use libjpeg: yes |
|---|
| 1341 | :info:configure use libpng: yes |
|---|
| 1342 | :info:configure use libtiff: yes |
|---|
| 1343 | :info:configure use zlib: yes |
|---|
| 1344 | :info:configure use libcurl: yes |
|---|
| 1345 | :info:configure use libopenjpeg: yes |
|---|
| 1346 | :info:configure use cms: yes |
|---|
| 1347 | :info:configure command line utils: yes |
|---|
| 1348 | :info:configure |
|---|
| 1349 | :info:configure Warning: Using zlib is not totally safe |
|---|
| 1350 | :debug:build build phase started at Fri Nov 25 13:17:04 PST 2011 |
|---|
| 1351 | :notice:build ---> Building poppler |
|---|
| 1352 | :debug:build Executing org.macports.build (poppler) |
|---|
| 1353 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 1354 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all' |
|---|
| 1355 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all |
|---|
| 1356 | :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1' |
|---|
| 1357 | :info:build /usr/bin/make all-recursive |
|---|
| 1358 | :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1' |
|---|
| 1359 | :info:build Making all in goo |
|---|
| 1360 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/goo' |
|---|
| 1361 | :info:build CXX gmempp.lo |
|---|
| 1362 | :info:build CXX gfile.lo |
|---|
| 1363 | :info:build CXX GooHash.lo |
|---|
| 1364 | :info:build CXX GooList.lo |
|---|
| 1365 | :info:build CXX GooTimer.lo |
|---|
| 1366 | :info:build CXX GooString.lo |
|---|
| 1367 | :info:build CXX gmem.lo |
|---|
| 1368 | :info:build CXX FixedPoint.lo |
|---|
| 1369 | :info:build CXX PNGWriter.lo |
|---|
| 1370 | :info:build CXX JpegWriter.lo |
|---|
| 1371 | :info:build CXX TiffWriter.lo |
|---|
| 1372 | :info:build CXX ImgWriter.lo |
|---|
| 1373 | :info:build CXX gstrtod.lo |
|---|
| 1374 | :info:build CXXLD libgoo.la |
|---|
| 1375 | :info:build /usr/bin/ranlib: file: .libs/libgoo.a(gmempp.o) has no symbols |
|---|
| 1376 | :info:build /usr/bin/ranlib: file: .libs/libgoo.a(FixedPoint.o) has no symbols |
|---|
| 1377 | :info:build ranlib: file: .libs/libgoo.a(gmempp.o) has no symbols |
|---|
| 1378 | :info:build ranlib: file: .libs/libgoo.a(FixedPoint.o) has no symbols |
|---|
| 1379 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/goo' |
|---|
| 1380 | :info:build Making all in fofi |
|---|
| 1381 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/fofi' |
|---|
| 1382 | :info:build CXX FoFiEncodings.lo |
|---|
| 1383 | :info:build CXX FoFiBase.lo |
|---|
| 1384 | :info:build CXX FoFiTrueType.lo |
|---|
| 1385 | :info:build CXX FoFiType1.lo |
|---|
| 1386 | :info:build CXX FoFiType1C.lo |
|---|
| 1387 | :info:build CXXLD libfofi.la |
|---|
| 1388 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/fofi' |
|---|
| 1389 | :info:build Making all in splash |
|---|
| 1390 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/splash' |
|---|
| 1391 | :info:build CXX Splash.lo |
|---|
| 1392 | :info:build CXX SplashBitmap.lo |
|---|
| 1393 | :info:build CXX SplashClip.lo |
|---|
| 1394 | :info:build CXX SplashFTFont.lo |
|---|
| 1395 | :info:build CXX SplashFTFontEngine.lo |
|---|
| 1396 | :info:build CXX SplashFTFontFile.lo |
|---|
| 1397 | :info:build CXX SplashFont.lo |
|---|
| 1398 | :info:build CXX SplashFontEngine.lo |
|---|
| 1399 | :info:build CXX SplashFontFile.lo |
|---|
| 1400 | :info:build CXX SplashFontFileID.lo |
|---|
| 1401 | :info:build CXX SplashPath.lo |
|---|
| 1402 | :info:build CXX SplashPattern.lo |
|---|
| 1403 | :info:build CXX SplashScreen.lo |
|---|
| 1404 | :info:build CXX SplashState.lo |
|---|
| 1405 | :info:build CXX SplashT1Font.lo |
|---|
| 1406 | :info:build CXX SplashT1FontEngine.lo |
|---|
| 1407 | :info:build CXX SplashT1FontFile.lo |
|---|
| 1408 | :info:build CXX SplashXPath.lo |
|---|
| 1409 | :info:build CXX SplashXPathScanner.lo |
|---|
| 1410 | :info:build CXXLD libsplash.la |
|---|
| 1411 | :info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1Font.o) has no symbols |
|---|
| 1412 | :info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1FontEngine.o) has no symbols |
|---|
| 1413 | :info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1FontFile.o) has no symbols |
|---|
| 1414 | :info:build ranlib: file: .libs/libsplash.a(SplashT1Font.o) has no symbols |
|---|
| 1415 | :info:build ranlib: file: .libs/libsplash.a(SplashT1FontEngine.o) has no symbols |
|---|
| 1416 | :info:build ranlib: file: .libs/libsplash.a(SplashT1FontFile.o) has no symbols |
|---|
| 1417 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/splash' |
|---|
| 1418 | :info:build Making all in poppler |
|---|
| 1419 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler' |
|---|
| 1420 | :info:build /usr/bin/make all-am |
|---|
| 1421 | :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler' |
|---|
| 1422 | :info:build CXX SplashOutputDev.lo |
|---|
| 1423 | :info:build CXX DCTStream.lo |
|---|
| 1424 | :info:build CXX FlateStream.lo |
|---|
| 1425 | :info:build CXX JPEG2000Stream.lo |
|---|
| 1426 | :info:build CXX CurlCachedFile.lo |
|---|
| 1427 | :info:build CXX CurlPDFDocBuilder.lo |
|---|
| 1428 | :info:build CXX Annot.lo |
|---|
| 1429 | :info:build CXX Array.lo |
|---|
| 1430 | :info:build CXX BuiltinFont.lo |
|---|
| 1431 | :info:build CXX BuiltinFontTables.lo |
|---|
| 1432 | :info:build CXX CachedFile.lo |
|---|
| 1433 | :info:build CXX Catalog.lo |
|---|
| 1434 | :info:build CXX CharCodeToUnicode.lo |
|---|
| 1435 | :info:build CXX CMap.lo |
|---|
| 1436 | :info:build CXX DateInfo.lo |
|---|
| 1437 | :info:build CXX Decrypt.lo |
|---|
| 1438 | :info:build CXX Dict.lo |
|---|
| 1439 | :info:build CXX Error.lo |
|---|
| 1440 | :info:build CXX FileSpec.lo |
|---|
| 1441 | :info:build CXX FontEncodingTables.lo |
|---|
| 1442 | :info:build CXX Form.lo |
|---|
| 1443 | :info:build CXX FontInfo.lo |
|---|
| 1444 | :info:build CXX Function.lo |
|---|
| 1445 | :info:build CXX Gfx.lo |
|---|
| 1446 | :info:build CXX GfxFont.lo |
|---|
| 1447 | :info:build CXX GfxState.lo |
|---|
| 1448 | :info:build CXX GlobalParams.lo |
|---|
| 1449 | :info:build CXX Hints.lo |
|---|
| 1450 | :info:build CXX JArithmeticDecoder.lo |
|---|
| 1451 | :info:build CXX JBIG2Stream.lo |
|---|
| 1452 | :info:build CXX Lexer.lo |
|---|
| 1453 | :info:build CXX Linearization.lo |
|---|
| 1454 | :info:build CXX Link.lo |
|---|
| 1455 | :info:build CXX LocalPDFDocBuilder.lo |
|---|
| 1456 | :info:build CXX Movie.lo |
|---|
| 1457 | :info:build CXX NameToCharCode.lo |
|---|
| 1458 | :info:build CXX Object.lo |
|---|
| 1459 | :info:build CXX OptionalContent.lo |
|---|
| 1460 | :info:build CXX Outline.lo |
|---|
| 1461 | :info:build CXX OutputDev.lo |
|---|
| 1462 | :info:build CXX Page.lo |
|---|
| 1463 | :info:build CXX PageTransition.lo |
|---|
| 1464 | :info:build CXX Parser.lo |
|---|
| 1465 | :info:build CXX PDFDoc.lo |
|---|
| 1466 | :info:build CXX PDFDocEncoding.lo |
|---|
| 1467 | :info:build CXX PDFDocFactory.lo |
|---|
| 1468 | :info:build CXX PopplerCache.lo |
|---|
| 1469 | :info:build CXX ProfileData.lo |
|---|
| 1470 | :info:build CXX PreScanOutputDev.lo |
|---|
| 1471 | :info:build CXX PSTokenizer.lo |
|---|
| 1472 | :info:build CXX Rendition.lo |
|---|
| 1473 | :info:build CXX StdinCachedFile.lo |
|---|
| 1474 | :info:build CXX StdinPDFDocBuilder.lo |
|---|
| 1475 | :info:build CXX Stream.lo |
|---|
| 1476 | :info:build CXX strtok_r.lo |
|---|
| 1477 | :info:build CXX UnicodeMap.lo |
|---|
| 1478 | :info:build CXX UnicodeTypeTable.lo |
|---|
| 1479 | :info:build CXX ViewerPreferences.lo |
|---|
| 1480 | :info:build CXX XRef.lo |
|---|
| 1481 | :info:build CXX PSOutputDev.lo |
|---|
| 1482 | :info:build CXX TextOutputDev.lo |
|---|
| 1483 | :info:build CXX PageLabelInfo.lo |
|---|
| 1484 | :info:build CXX SecurityHandler.lo |
|---|
| 1485 | :info:build CXX Sound.lo |
|---|
| 1486 | :info:build CXX XpdfPluginAPI.lo |
|---|
| 1487 | :info:build CXX CairoFontEngine.lo |
|---|
| 1488 | :info:build CXX CairoOutputDev.lo |
|---|
| 1489 | :info:build CXX CairoRescaleBox.lo |
|---|
| 1490 | :info:build UTF8.h:59: warning: 'int mapUCS2(Unicode, char*, int)' defined but not used |
|---|
| 1491 | :info:build CXXLD libpoppler.la |
|---|
| 1492 | :info:build CXXLD libpoppler-cairo.la |
|---|
| 1493 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(strtok_r.o) has no symbols |
|---|
| 1494 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(XpdfPluginAPI.o) has no symbols |
|---|
| 1495 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(FixedPoint.o) has no symbols |
|---|
| 1496 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(gmempp.o) has no symbols |
|---|
| 1497 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1Font.o) has no symbols |
|---|
| 1498 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1FontEngine.o) has no symbols |
|---|
| 1499 | :info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1FontFile.o) has no symbols |
|---|
| 1500 | :info:build ranlib: file: .libs/libpoppler.a(strtok_r.o) has no symbols |
|---|
| 1501 | :info:build ranlib: file: .libs/libpoppler.a(XpdfPluginAPI.o) has no symbols |
|---|
| 1502 | :info:build ranlib: file: .libs/libpoppler.a(FixedPoint.o) has no symbols |
|---|
| 1503 | :info:build ranlib: file: .libs/libpoppler.a(gmempp.o) has no symbols |
|---|
| 1504 | :info:build ranlib: file: .libs/libpoppler.a(SplashT1Font.o) has no symbols |
|---|
| 1505 | :info:build ranlib: file: .libs/libpoppler.a(SplashT1FontEngine.o) has no symbols |
|---|
| 1506 | :info:build ranlib: file: .libs/libpoppler.a(SplashT1FontFile.o) has no symbols |
|---|
| 1507 | :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler' |
|---|
| 1508 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler' |
|---|
| 1509 | :info:build Making all in utils |
|---|
| 1510 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/utils' |
|---|
| 1511 | :info:build CXX pdffonts.o |
|---|
| 1512 | :info:build CXX parseargs.o |
|---|
| 1513 | :info:build CXX pdfimages.o |
|---|
| 1514 | :info:build CXX ImageOutputDev.o |
|---|
| 1515 | :info:build CXX pdfinfo.o |
|---|
| 1516 | :info:build CXX printencodings.o |
|---|
| 1517 | :info:build CXX pdftops.o |
|---|
| 1518 | :info:build CXX pdftotext.o |
|---|
| 1519 | :info:build CXX pdftohtml.o |
|---|
| 1520 | :info:build CXX HtmlFonts.o |
|---|
| 1521 | :info:build CXX HtmlLinks.o |
|---|
| 1522 | :info:build CXX HtmlOutputDev.o |
|---|
| 1523 | :info:build CXX pdfseparate.o |
|---|
| 1524 | :info:build CXX pdfunite.o |
|---|
| 1525 | :info:build CXX pdftoppm.o |
|---|
| 1526 | :info:build CXX pdftocairo.o |
|---|
| 1527 | :info:build CXXLD pdffonts |
|---|
| 1528 | :info:build CXXLD pdfimages |
|---|
| 1529 | :info:build CXXLD pdfinfo |
|---|
| 1530 | :info:build CXXLD pdftops |
|---|
| 1531 | :info:build CXXLD pdftotext |
|---|
| 1532 | :info:build CXXLD pdftohtml |
|---|
| 1533 | :info:build CXXLD pdfseparate |
|---|
| 1534 | :info:build CXXLD pdfunite |
|---|
| 1535 | :info:build CXXLD pdftoppm |
|---|
| 1536 | :info:build CXXLD pdftocairo |
|---|
| 1537 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/utils' |
|---|
| 1538 | :info:build Making all in glib |
|---|
| 1539 | :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1540 | :info:build GEN stamp-poppler-enums.h |
|---|
| 1541 | :info:build /usr/bin/make all-recursive |
|---|
| 1542 | :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1543 | :info:build Making all in . |
|---|
| 1544 | :info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1545 | :info:build CXX poppler-action.lo |
|---|
| 1546 | :info:build CC poppler-enums.lo |
|---|
| 1547 | :info:build CXX poppler-date.lo |
|---|
| 1548 | :info:build CXX poppler-document.lo |
|---|
| 1549 | :info:build CXX poppler-page.lo |
|---|
| 1550 | :info:build CXX poppler-attachment.lo |
|---|
| 1551 | :info:build CXX poppler-form-field.lo |
|---|
| 1552 | :info:build CXX poppler-annot.lo |
|---|
| 1553 | :info:build CXX poppler-layer.lo |
|---|
| 1554 | :info:build CXX poppler-media.lo |
|---|
| 1555 | :info:build CXX poppler-movie.lo |
|---|
| 1556 | :info:build CXX poppler.lo |
|---|
| 1557 | :info:build CXXLD libpoppler-glib.la |
|---|
| 1558 | :info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1559 | :info:build Making all in reference |
|---|
| 1560 | :info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/reference' |
|---|
| 1561 | :info:build make[4]: Nothing to be done for `all'. |
|---|
| 1562 | :info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/reference' |
|---|
| 1563 | :info:build Making all in demo |
|---|
| 1564 | :info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/demo' |
|---|
| 1565 | :info:build CC main.o |
|---|
| 1566 | :info:build CC annots.o |
|---|
| 1567 | :info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35, |
|---|
| 1568 | :info:build from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37, |
|---|
| 1569 | :info:build from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28, |
|---|
| 1570 | :info:build from /opt/local/include/gtk-2.0/gdk/gdk.h:33, |
|---|
| 1571 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:32, |
|---|
| 1572 | :info:build from main.c:19: |
|---|
| 1573 | :info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1574 | :info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35, |
|---|
| 1575 | :info:build from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37, |
|---|
| 1576 | :info:build from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28, |
|---|
| 1577 | :info:build from /opt/local/include/gtk-2.0/gdk/gdk.h:33, |
|---|
| 1578 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:32, |
|---|
| 1579 | :info:build from annots.c:19: |
|---|
| 1580 | :info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1581 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkobject.h:28, |
|---|
| 1582 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:25, |
|---|
| 1583 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1584 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1585 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1586 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1587 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1588 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1589 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1590 | :info:build from main.c:19: |
|---|
| 1591 | :info:build /opt/local/include/atk-1.0/atk/atkstate.h:173: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1592 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkobject.h:28, |
|---|
| 1593 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:25, |
|---|
| 1594 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1595 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1596 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1597 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1598 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1599 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1600 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1601 | :info:build from annots.c:19: |
|---|
| 1602 | :info:build /opt/local/include/atk-1.0/atk/atkstate.h:173: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1603 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:25, |
|---|
| 1604 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1605 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1606 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1607 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1608 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1609 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1610 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1611 | :info:build from main.c:19: |
|---|
| 1612 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:384: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1613 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:25, |
|---|
| 1614 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1615 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1616 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1617 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1618 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1619 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1620 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1621 | :info:build from annots.c:19: |
|---|
| 1622 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:384: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1623 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:538: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1624 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:539: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1625 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:538: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1626 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:539: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1627 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:574: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1628 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:574: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1629 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:585: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1630 | :info:build /opt/local/include/atk-1.0/atk/atkobject.h:585: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1631 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:26, |
|---|
| 1632 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1633 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1634 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1635 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1636 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1637 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1638 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1639 | :info:build from main.c:19: |
|---|
| 1640 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:58: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1641 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:88: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1642 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:90: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1643 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:92: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1644 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:100: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1645 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkcomponent.h:28, |
|---|
| 1646 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:27, |
|---|
| 1647 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1648 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1649 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1650 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1651 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1652 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1653 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1654 | :info:build from main.c:19: |
|---|
| 1655 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:150: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1656 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:232: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1657 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1658 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:242: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1659 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:28, |
|---|
| 1660 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1661 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1662 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1663 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1664 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1665 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1666 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1667 | :info:build from main.c:19: |
|---|
| 1668 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:52: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1669 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:26, |
|---|
| 1670 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1671 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1672 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1673 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1674 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1675 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1676 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1677 | :info:build from annots.c:19: |
|---|
| 1678 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:58: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1679 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:88: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1680 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:90: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1681 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:92: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1682 | :info:build /opt/local/include/atk-1.0/atk/atkaction.h:100: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1683 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:71: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1684 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:73: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1685 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1686 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkeditabletext.h:28, |
|---|
| 1687 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:29, |
|---|
| 1688 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1689 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1690 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1691 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1692 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1693 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1694 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1695 | :info:build from main.c:19: |
|---|
| 1696 | :info:build /opt/local/include/atk-1.0/atk/atktext.h:358: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1697 | :info:build /opt/local/include/atk-1.0/atk/atktext.h:360: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1698 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:34, |
|---|
| 1699 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1700 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1701 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1702 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1703 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1704 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1705 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1706 | :info:build from main.c:19: |
|---|
| 1707 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:56: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1708 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1709 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:83: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1710 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:40, |
|---|
| 1711 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1712 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1713 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1714 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1715 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1716 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1717 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1718 | :info:build from main.c:19: |
|---|
| 1719 | :info:build /opt/local/include/atk-1.0/atk/atkrelation.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1720 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:47, |
|---|
| 1721 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1722 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1723 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1724 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1725 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1726 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1727 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1728 | :info:build from main.c:19: |
|---|
| 1729 | :info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:61: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1730 | :info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1731 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:48, |
|---|
| 1732 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1733 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1734 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1735 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1736 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1737 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1738 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1739 | :info:build from main.c:19: |
|---|
| 1740 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:72: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1741 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:166: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1742 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:171: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1743 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkcomponent.h:28, |
|---|
| 1744 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:27, |
|---|
| 1745 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1746 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1747 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1748 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1749 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1750 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1751 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1752 | :info:build from annots.c:19: |
|---|
| 1753 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:150: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1754 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:232: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1755 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1756 | :info:build /opt/local/include/atk-1.0/atk/atkutil.h:242: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1757 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:28, |
|---|
| 1758 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1759 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1760 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1761 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1762 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1763 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1764 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1765 | :info:build from annots.c:19: |
|---|
| 1766 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:52: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1767 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:71: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1768 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:73: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1769 | :info:build /opt/local/include/atk-1.0/atk/atkdocument.h:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1770 | :info:build In file included from /opt/local/include/atk-1.0/atk/atkeditabletext.h:28, |
|---|
| 1771 | :info:build from /opt/local/include/atk-1.0/atk/atk.h:29, |
|---|
| 1772 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1773 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1774 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1775 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1776 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1777 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1778 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1779 | :info:build from annots.c:19: |
|---|
| 1780 | :info:build /opt/local/include/atk-1.0/atk/atktext.h:358: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1781 | :info:build /opt/local/include/atk-1.0/atk/atktext.h:360: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1782 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:34, |
|---|
| 1783 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1784 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1785 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1786 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1787 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1788 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1789 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1790 | :info:build from annots.c:19: |
|---|
| 1791 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:56: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1792 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1793 | :info:build /opt/local/include/atk-1.0/atk/atkimage.h:83: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1794 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:40, |
|---|
| 1795 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1796 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1797 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1798 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1799 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1800 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1801 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1802 | :info:build from annots.c:19: |
|---|
| 1803 | :info:build /opt/local/include/atk-1.0/atk/atkrelation.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1804 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:47, |
|---|
| 1805 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1806 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1807 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1808 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1809 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1810 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1811 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1812 | :info:build from annots.c:19: |
|---|
| 1813 | :info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:61: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1814 | :info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1815 | :info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:48, |
|---|
| 1816 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40, |
|---|
| 1817 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35, |
|---|
| 1818 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35, |
|---|
| 1819 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36, |
|---|
| 1820 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35, |
|---|
| 1821 | :info:build from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32, |
|---|
| 1822 | :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:33, |
|---|
| 1823 | :info:build from annots.c:19: |
|---|
| 1824 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:72: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’ |
|---|
| 1825 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:166: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1826 | :info:build /opt/local/include/atk-1.0/atk/atktable.h:171: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ |
|---|
| 1827 | :info:build main.c: In function ‘pgd_demo_get_auth_dialog’: |
|---|
| 1828 | :info:build main.c:183: warning: implicit declaration of function ‘gtk_dialog_set_has_separator’ |
|---|
| 1829 | :info:build make[4]: *** [main.o] Error 1 |
|---|
| 1830 | :info:build make[4]: *** Waiting for unfinished jobs.... |
|---|
| 1831 | :info:build annots.c: In function ‘pgd_annots_add_annot’: |
|---|
| 1832 | :info:build annots.c:669: warning: implicit declaration of function ‘gtk_combo_box_new_text’ |
|---|
| 1833 | :info:build annots.c:669: warning: assignment makes pointer from integer without a cast |
|---|
| 1834 | :info:build annots.c:670: warning: implicit declaration of function ‘gtk_combo_box_append_text’ |
|---|
| 1835 | :info:build make[4]: *** [annots.o] Error 1 |
|---|
| 1836 | :info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/demo' |
|---|
| 1837 | :info:build make[3]: *** [all-recursive] Error 1 |
|---|
| 1838 | :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1839 | :info:build make[2]: *** [all] Error 2 |
|---|
| 1840 | :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib' |
|---|
| 1841 | :info:build make[1]: *** [all-recursive] Error 1 |
|---|
| 1842 | :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1' |
|---|
| 1843 | :info:build make: *** [all] Error 2 |
|---|
| 1844 | :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1' |
|---|
| 1845 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all " returned error 2 |
|---|
| 1846 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 1847 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 1848 | while executing |
|---|
| 1849 | "command_exec build" |
|---|
| 1850 | (procedure "portbuild::build_main" line 8) |
|---|
| 1851 | invoked from within |
|---|
| 1852 | "$procedure $targetname" |
|---|
| 1853 | :info:build Warning: the following items did not execute (for poppler): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 1854 | :notice:build Log for poppler is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/main.log |
|---|
