| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main xz 5.0.3_0 exists in the ports tree |
|---|
| 4 | :debug:main xz 5.0.3_0 is the latest installed |
|---|
| 5 | :debug:main xz 5.0.3_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz |
|---|
| 9 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main adding the default universal variant |
|---|
| 13 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 14 | :debug:main No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0 |
|---|
| 15 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 16 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 17 | :debug:main libiconv 1.14_0 is the latest installed |
|---|
| 18 | :debug:main libiconv 1.14_0 is active |
|---|
| 19 | :debug:main Merging existing variants '' into variants |
|---|
| 20 | :debug:main new fully merged portvariants: |
|---|
| 21 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv |
|---|
| 22 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 23 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 24 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 26 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 27 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 28 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 29 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 30 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 31 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 32 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 33 | :debug:main Merging existing variants '' into variants |
|---|
| 34 | :debug:main new fully merged portvariants: |
|---|
| 35 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext |
|---|
| 36 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 37 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 38 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 40 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 41 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 42 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 43 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 44 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 45 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 46 | :debug:main ncurses 5.9_1 is the latest installed |
|---|
| 47 | :debug:main ncurses 5.9_1 is active |
|---|
| 48 | :debug:main Merging existing variants '' into variants |
|---|
| 49 | :debug:main new fully merged portvariants: |
|---|
| 50 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses |
|---|
| 51 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 52 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 53 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main adding the default universal variant |
|---|
| 55 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 56 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 57 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 58 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 59 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 60 | :debug:main expat 2.0.1_1 is active |
|---|
| 61 | :debug:main Merging existing variants '' into variants |
|---|
| 62 | :debug:main new fully merged portvariants: |
|---|
| 63 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat |
|---|
| 64 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 65 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 66 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 67 | :debug:main adding the default universal variant |
|---|
| 68 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 69 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 70 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 71 | :debug:main autoconf 2.68_2 exists in the ports tree |
|---|
| 72 | :debug:main autoconf 2.68_2 is the latest installed |
|---|
| 73 | :debug:main autoconf 2.68_2 is active |
|---|
| 74 | :debug:main Merging existing variants '' into variants |
|---|
| 75 | :debug:main new fully merged portvariants: |
|---|
| 76 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf |
|---|
| 77 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 78 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 79 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 80 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 81 | :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2 |
|---|
| 82 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 83 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 84 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 85 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 86 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 87 | :debug:main new fully merged portvariants: perl5_12 + |
|---|
| 88 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 |
|---|
| 89 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 90 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 91 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 92 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 93 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 94 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 95 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 96 | :debug:main perl5.12 5.12.3_2 exists in the ports tree |
|---|
| 97 | :debug:main perl5.12 5.12.3_2 is the latest installed |
|---|
| 98 | :debug:main perl5.12 5.12.3_2 is active |
|---|
| 99 | :debug:main Merging existing variants '' into variants |
|---|
| 100 | :debug:main new fully merged portvariants: |
|---|
| 101 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 |
|---|
| 102 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 103 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 104 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main adding the default universal variant |
|---|
| 106 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 107 | :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 |
|---|
| 108 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 109 | :debug:main gdbm 1.10_0 exists in the ports tree |
|---|
| 110 | :debug:main gdbm 1.10_0 is the latest installed |
|---|
| 111 | :debug:main gdbm 1.10_0 is active |
|---|
| 112 | :debug:main Merging existing variants '' into variants |
|---|
| 113 | :debug:main new fully merged portvariants: |
|---|
| 114 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm |
|---|
| 115 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 116 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 117 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 118 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 119 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 120 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 121 | :debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0 |
|---|
| 122 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 123 | :debug:main m4 1.4.16_0 exists in the ports tree |
|---|
| 124 | :debug:main m4 1.4.16_0 is the latest installed |
|---|
| 125 | :debug:main m4 1.4.16_0 is active |
|---|
| 126 | :debug:main Merging existing variants '' into variants |
|---|
| 127 | :debug:main new fully merged portvariants: |
|---|
| 128 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4 |
|---|
| 129 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 130 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 131 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 132 | :debug:main adding the default universal variant |
|---|
| 133 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 134 | :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0 |
|---|
| 135 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 136 | :debug:main help2man 1.40.4_1 exists in the ports tree |
|---|
| 137 | :debug:main help2man 1.40.4_1 is the latest installed |
|---|
| 138 | :debug:main help2man 1.40.4_1 is active |
|---|
| 139 | :debug:main Merging existing variants '' into variants |
|---|
| 140 | :debug:main new fully merged portvariants: |
|---|
| 141 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man |
|---|
| 142 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 143 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 144 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 145 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 146 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 147 | :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1 |
|---|
| 148 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 149 | :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree |
|---|
| 150 | :debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed |
|---|
| 151 | :debug:main p5.12-locale-gettext 1.50.0_6 is active |
|---|
| 152 | :debug:main Merging existing variants '' into variants |
|---|
| 153 | :debug:main new fully merged portvariants: |
|---|
| 154 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-locale-gettext |
|---|
| 155 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 156 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 157 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 158 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 159 | :debug:main Re-registering default for livecheck.version |
|---|
| 160 | :debug:main Re-registering default for configure.universal_args |
|---|
| 161 | :debug:main adding the default universal variant |
|---|
| 162 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 163 | :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12-locale-gettext 1.50.0_6 |
|---|
| 164 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 165 | :debug:main automake 1.11.1_0 exists in the ports tree |
|---|
| 166 | :debug:main automake 1.11.1_0 is the latest installed |
|---|
| 167 | :debug:main automake 1.11.1_0 is active |
|---|
| 168 | :debug:main Merging existing variants '' into variants |
|---|
| 169 | :debug:main new fully merged portvariants: |
|---|
| 170 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake |
|---|
| 171 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 172 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 173 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 174 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 175 | :debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 |
|---|
| 176 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 177 | :debug:main libtool 2.4.2_0 exists in the ports tree |
|---|
| 178 | :debug:main libtool 2.4.2_0 is the latest installed |
|---|
| 179 | :debug:main libtool 2.4.2_0 is active |
|---|
| 180 | :debug:main Merging existing variants '' into variants |
|---|
| 181 | :debug:main new fully merged portvariants: |
|---|
| 182 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool |
|---|
| 183 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 184 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 185 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 186 | :debug:main adding the default universal variant |
|---|
| 187 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 188 | :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0 |
|---|
| 189 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 190 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 191 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 192 | :debug:main zlib 1.2.5_0 is active |
|---|
| 193 | :debug:main Merging existing variants '' into variants |
|---|
| 194 | :debug:main new fully merged portvariants: |
|---|
| 195 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib |
|---|
| 196 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 197 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 198 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 200 | :debug:main adding the default universal variant |
|---|
| 201 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 202 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 203 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 204 | :debug:main libffi 3.0.10_1 exists in the ports tree |
|---|
| 205 | :debug:main libffi 3.0.10_1 is the latest installed |
|---|
| 206 | :debug:main libffi 3.0.10_1 is active |
|---|
| 207 | :debug:main Merging existing variants '' into variants |
|---|
| 208 | :debug:main new fully merged portvariants: |
|---|
| 209 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi |
|---|
| 210 | :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc |
|---|
| 211 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 212 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 214 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 215 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 216 | :debug:main No need to upgrade! libffi 3.0.10_1 >= libffi 3.0.10_1 |
|---|
| 217 | :msg:main ---> Computing dependencies for glib2:info:main .:debug:main Checking for conflicts against glib2 |
|---|
| 218 | :debug:main Searching for dependency: glib2-devel |
|---|
| 219 | :debug:main Didn't find receipt, going to depspec regex for: glib2-devel |
|---|
| 220 | :debug:main Searching for dependency: xz |
|---|
| 221 | :debug:main Found Dependency: receipt exists for xz |
|---|
| 222 | :debug:main Searching for dependency: autoconf |
|---|
| 223 | :debug:main Found Dependency: receipt exists for autoconf |
|---|
| 224 | :debug:main Searching for dependency: automake |
|---|
| 225 | :debug:main Found Dependency: receipt exists for automake |
|---|
| 226 | :debug:main Searching for dependency: libtool |
|---|
| 227 | :debug:main Found Dependency: receipt exists for libtool |
|---|
| 228 | :debug:main Searching for dependency: gettext |
|---|
| 229 | :debug:main Found Dependency: receipt exists for gettext |
|---|
| 230 | :debug:main Searching for dependency: libiconv |
|---|
| 231 | :debug:main Found Dependency: receipt exists for libiconv |
|---|
| 232 | :debug:main Searching for dependency: zlib |
|---|
| 233 | :debug:main Found Dependency: receipt exists for zlib |
|---|
| 234 | :debug:main Searching for dependency: libffi |
|---|
| 235 | :debug:main Found Dependency: receipt exists for libffi |
|---|
| 236 | :debug:main Searching for dependency: perl5 |
|---|
| 237 | :debug:main Found Dependency: receipt exists for perl5 |
|---|
| 238 | :msg:main |
|---|
| 239 | :debug:main Executing org.macports.main (glib2) |
|---|
| 240 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 241 | :debug:main egid changed to: 506 |
|---|
| 242 | :debug:main euid changed to: 503 |
|---|
| 243 | :debug:main Skipping completed org.macports.archivefetch (glib2) |
|---|
| 244 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 245 | :debug:main Skipping completed org.macports.fetch (glib2) |
|---|
| 246 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 247 | :debug:main Skipping completed org.macports.checksum (glib2) |
|---|
| 248 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 249 | :debug:main Skipping completed org.macports.extract (glib2) |
|---|
| 250 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 251 | :debug:main Skipping completed org.macports.patch (glib2) |
|---|
| 252 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 253 | :debug:main Skipping completed org.macports.configure (glib2) |
|---|
| 254 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 255 | :debug:build build phase started at Thu Nov 24 14:25:53 EST 2011 |
|---|
| 256 | :notice:build ---> Building glib2 |
|---|
| 257 | :debug:build Executing org.macports.build (glib2) |
|---|
| 258 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5' |
|---|
| 259 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2" && /usr/bin/make -j2 -w all V=1' |
|---|
| 260 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2" && /usr/bin/make -j2 -w all V=1 |
|---|
| 261 | :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2' |
|---|
| 262 | :info:build /bin/sh ./config.status --recheck |
|---|
| 263 | :info:build running CONFIG_SHELL=/bin/sh /bin/sh ./configure --prefix=/opt/local --enable-static --disable-dtrace CC=/usr/bin/gcc-4.0 CFLAGS=-pipe -O2 -fstrict-aliasing -arch ppc LDFLAGS=-L/opt/local/lib -lresolv -bind_at_load -arch ppc CPPFLAGS=-I/opt/local/include CXX=/usr/bin/g++-4.0 CXXFLAGS=-pipe -O2 -arch ppc PKG_CONFIG=false ZLIB_CFLAGS=-I/opt/local/include ZLIB_LIBS=-L/opt/local/lib -lz LIBFFI_CFLAGS=-I/opt/local/lib/libffi-3.0.10/include LIBFFI_LIBS=-L/opt/local/lib -lffi --no-create --no-recursion |
|---|
| 264 | :info:build checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 265 | :info:build checking whether build environment is sane... yes |
|---|
| 266 | :info:build checking for a thread-safe mkdir -p... ./install-sh -c -d |
|---|
| 267 | :info:build checking for gawk... no |
|---|
| 268 | :info:build checking for mawk... no |
|---|
| 269 | :info:build checking for nawk... no |
|---|
| 270 | :info:build checking for awk... awk |
|---|
| 271 | :info:build checking whether make sets $(MAKE)... yes |
|---|
| 272 | :info:build checking how to create a ustar tar archive... gnutar |
|---|
| 273 | :info:build checking whether to disable maintainer-specific portions of Makefiles... yes |
|---|
| 274 | :info:build checking for gcc... /usr/bin/gcc-4.0 |
|---|
| 275 | :info:build checking whether the C compiler works... yes |
|---|
| 276 | :info:build checking for C compiler default output file name... a.out |
|---|
| 277 | :info:build checking for suffix of executables... |
|---|
| 278 | :info:build checking whether we are cross compiling... no |
|---|
| 279 | :info:build checking for suffix of object files... o |
|---|
| 280 | :info:build checking whether we are using the GNU C compiler... yes |
|---|
| 281 | :info:build checking whether /usr/bin/gcc-4.0 accepts -g... yes |
|---|
| 282 | :info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed |
|---|
| 283 | :info:build checking for style of include used by make... GNU |
|---|
| 284 | :info:build checking dependency style of /usr/bin/gcc-4.0... gcc3 |
|---|
| 285 | :info:build checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E |
|---|
| 286 | :info:build checking build system type... powerpc-apple-darwin9.8.0 |
|---|
| 287 | :info:build checking host system type... powerpc-apple-darwin9.8.0 |
|---|
| 288 | :info:build checking for the BeOS... no |
|---|
| 289 | :info:build checking for Win32... no |
|---|
| 290 | :info:build checking for Mac OS X Carbon support... yes |
|---|
| 291 | :info:build checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 292 | :info:build checking for egrep... /usr/bin/grep -E |
|---|
| 293 | :info:build checking whether we are using the GNU C Library 2.1 or newer... no |
|---|
| 294 | :info:build checking whether to enable garbage collector friendliness... no |
|---|
| 295 | :info:build checking whether to disable memory pools... no |
|---|
| 296 | :info:build readlink: illegal option -- f |
|---|
| 297 | :info:build usage: readlink [-n] [file ...] |
|---|
| 298 | :info:build checking whether we are using the GNU C++ compiler... yes |
|---|
| 299 | :info:build checking whether /usr/bin/g++-4.0 accepts -g... yes |
|---|
| 300 | :info:build checking dependency style of /usr/bin/g++-4.0... gcc3 |
|---|
| 301 | :info:build checking for gcc... (cached) /usr/bin/gcc-4.0 |
|---|
| 302 | :info:build checking whether we are using the GNU C compiler... (cached) yes |
|---|
| 303 | :info:build checking whether /usr/bin/gcc-4.0 accepts -g... (cached) yes |
|---|
| 304 | :info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89... (cached) none needed |
|---|
| 305 | :info:build checking dependency style of /usr/bin/gcc-4.0... (cached) gcc3 |
|---|
| 306 | :info:build checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes |
|---|
| 307 | :info:build checking for special C compiler options needed for large files... no |
|---|
| 308 | :info:build checking for _FILE_OFFSET_BITS value needed for large files... no |
|---|
| 309 | :info:build ./configure: line 6969: syntax error near unexpected token `0.16' |
|---|
| 310 | :info:build ./configure: line 6969: `PKG_PROG_PKG_CONFIG(0.16)' |
|---|
| 311 | :info:build make: *** [config.status] Error 2 |
|---|
| 312 | :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2' |
|---|
| 313 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2" && /usr/bin/make -j2 -w all V=1 " returned error 2 |
|---|
| 314 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 315 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 316 | while executing |
|---|
| 317 | "command_exec build" |
|---|
| 318 | (procedure "portbuild::build_main" line 8) |
|---|
| 319 | invoked from within |
|---|
| 320 | "$procedure $targetname" |
|---|
| 321 | :info:build Warning: the following items did not execute (for glib2): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 322 | :notice:build Log for glib2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/main.log |
|---|
