| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.26_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.26_0 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.26_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main adding the default universal variant |
|---|
| 13 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 14 | :debug:main Requested variant no_x11 is not provided by port pkgconfig. |
|---|
| 15 | :debug:main Requested variant quartz is not provided by port pkgconfig. |
|---|
| 16 | :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 |
|---|
| 17 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 18 | :debug:main glib2 2.30.2_2 exists in the ports tree |
|---|
| 19 | :debug:main glib2 2.30.2_2 is the latest installed |
|---|
| 20 | :debug:main glib2 2.30.2_2 is active |
|---|
| 21 | :debug:main Merging existing variants '' into variants |
|---|
| 22 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 23 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2 |
|---|
| 24 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 25 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 28 | :debug:main adding the default universal variant |
|---|
| 29 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 30 | :debug:main Requested variant no_x11 is not provided by port glib2. |
|---|
| 31 | :debug:main Requested variant quartz is not provided by port glib2. |
|---|
| 32 | :debug:main No need to upgrade! glib2 2.30.2_2 >= glib2 2.30.2_2 |
|---|
| 33 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 34 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 35 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 36 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 37 | :debug:main Merging existing variants '' into variants |
|---|
| 38 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 39 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext |
|---|
| 40 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 41 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 44 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 45 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 46 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 47 | :debug:main Requested variant no_x11 is not provided by port gettext. |
|---|
| 48 | :debug:main Requested variant quartz is not provided by port gettext. |
|---|
| 49 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 50 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 51 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 52 | :debug:main libiconv 1.14_0 is the latest installed |
|---|
| 53 | :debug:main libiconv 1.14_0 is active |
|---|
| 54 | :debug:main Merging existing variants '' into variants |
|---|
| 55 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 56 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv |
|---|
| 57 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 58 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 59 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 60 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 61 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 62 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 63 | :debug:main Requested variant no_x11 is not provided by port libiconv. |
|---|
| 64 | :debug:main Requested variant quartz is not provided by port libiconv. |
|---|
| 65 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 66 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 67 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 68 | :debug:main ncurses 5.9_1 is the latest installed |
|---|
| 69 | :debug:main ncurses 5.9_1 is active |
|---|
| 70 | :debug:main Merging existing variants '' into variants |
|---|
| 71 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 72 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses |
|---|
| 73 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 74 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | :debug:main adding the default universal variant |
|---|
| 77 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 78 | :debug:main Requested variant no_x11 is not provided by port ncurses. |
|---|
| 79 | :debug:main Requested variant quartz is not provided by port ncurses. |
|---|
| 80 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 81 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 82 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 83 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 84 | :debug:main expat 2.0.1_1 is active |
|---|
| 85 | :debug:main Merging existing variants '' into variants |
|---|
| 86 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 87 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat |
|---|
| 88 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 89 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 90 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 91 | :debug:main adding the default universal variant |
|---|
| 92 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 93 | :debug:main Requested variant no_x11 is not provided by port expat. |
|---|
| 94 | :debug:main Requested variant quartz is not provided by port expat. |
|---|
| 95 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 96 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 97 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 98 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 99 | :debug:main zlib 1.2.5_0 is active |
|---|
| 100 | :debug:main Merging existing variants '' into variants |
|---|
| 101 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 102 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib |
|---|
| 103 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 104 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 107 | :debug:main adding the default universal variant |
|---|
| 108 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 109 | :debug:main Requested variant no_x11 is not provided by port zlib. |
|---|
| 110 | :debug:main Requested variant quartz is not provided by port zlib. |
|---|
| 111 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 112 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 113 | :debug:main libffi 3.0.10_2 exists in the ports tree |
|---|
| 114 | :debug:main libffi 3.0.10_2 is the latest installed |
|---|
| 115 | :debug:main libffi 3.0.10_2 is active |
|---|
| 116 | :debug:main Merging existing variants '' into variants |
|---|
| 117 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 118 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi |
|---|
| 119 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 120 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 123 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 124 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 125 | :debug:main Requested variant no_x11 is not provided by port libffi. |
|---|
| 126 | :debug:main Requested variant quartz is not provided by port libffi. |
|---|
| 127 | :debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2 |
|---|
| 128 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 129 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 130 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 131 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 132 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 133 | :debug:main new fully merged portvariants: no_x11 + perl5_12 + quartz + |
|---|
| 134 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 |
|---|
| 135 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 136 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 137 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 138 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 139 | :debug:main Requested variant no_x11 is not provided by port perl5. |
|---|
| 140 | :debug:main Requested variant quartz is not provided by port perl5. |
|---|
| 141 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 142 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 143 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 144 | :debug:main perl5.12 5.12.3_2 exists in the ports tree |
|---|
| 145 | :debug:main perl5.12 5.12.3_2 is the latest installed |
|---|
| 146 | :debug:main perl5.12 5.12.3_2 is active |
|---|
| 147 | :debug:main Merging existing variants '' into variants |
|---|
| 148 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 149 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 |
|---|
| 150 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 151 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 152 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 153 | :debug:main adding the default universal variant |
|---|
| 154 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 155 | :debug:main Requested variant no_x11 is not provided by port perl5.12. |
|---|
| 156 | :debug:main Requested variant quartz is not provided by port perl5.12. |
|---|
| 157 | :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 |
|---|
| 158 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 159 | :debug:main gdbm 1.10_0 exists in the ports tree |
|---|
| 160 | :debug:main gdbm 1.10_0 is the latest installed |
|---|
| 161 | :debug:main gdbm 1.10_0 is active |
|---|
| 162 | :debug:main Merging existing variants '' into variants |
|---|
| 163 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 164 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm |
|---|
| 165 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 166 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 169 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 170 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 171 | :debug:main Requested variant no_x11 is not provided by port gdbm. |
|---|
| 172 | :debug:main Requested variant quartz is not provided by port gdbm. |
|---|
| 173 | :debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0 |
|---|
| 174 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 175 | :debug:main python27 2.7.2_3 exists in the ports tree |
|---|
| 176 | :debug:main python27 2.7.2_3 is the latest installed |
|---|
| 177 | :debug:main python27 2.7.2_3 is active |
|---|
| 178 | :debug:main Merging existing variants '' into variants |
|---|
| 179 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 180 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 |
|---|
| 181 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 182 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 184 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 185 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 186 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 187 | :debug:main Requested variant no_x11 is not provided by port python27. |
|---|
| 188 | :debug:main Requested variant quartz is not provided by port python27. |
|---|
| 189 | :debug:main No need to upgrade! python27 2.7.2_3 >= python27 2.7.2_3 |
|---|
| 190 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 191 | :debug:main openssl 1.0.0e_1 exists in the ports tree |
|---|
| 192 | :debug:main openssl 1.0.0e_1 is the latest installed |
|---|
| 193 | :debug:main openssl 1.0.0e_1 is active |
|---|
| 194 | :debug:main Merging existing variants '' into variants |
|---|
| 195 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 196 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl |
|---|
| 197 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 198 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 200 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 201 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 202 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 203 | :debug:main Requested variant no_x11 is not provided by port openssl. |
|---|
| 204 | :debug:main Requested variant quartz is not provided by port openssl. |
|---|
| 205 | :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 |
|---|
| 206 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 207 | :debug:main sqlite3 3.7.9_0 exists in the ports tree |
|---|
| 208 | :debug:main sqlite3 3.7.9_0 is the latest installed |
|---|
| 209 | :debug:main sqlite3 3.7.9_0 is active |
|---|
| 210 | :debug:main Merging existing variants '' into variants |
|---|
| 211 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 212 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 |
|---|
| 213 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 214 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 215 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 216 | :debug:main adding the default universal variant |
|---|
| 217 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 218 | :debug:main Requested variant no_x11 is not provided by port sqlite3. |
|---|
| 219 | :debug:main Requested variant quartz is not provided by port sqlite3. |
|---|
| 220 | :debug:main No need to upgrade! sqlite3 3.7.9_0 >= sqlite3 3.7.9_0 |
|---|
| 221 | :debug:main epoch: in tree: 20090923 installed: 20090923 |
|---|
| 222 | :debug:main libedit 20110802-3.0_0 exists in the ports tree |
|---|
| 223 | :debug:main libedit 20110802-3.0_0 is the latest installed |
|---|
| 224 | :debug:main libedit 20110802-3.0_0 is active |
|---|
| 225 | :debug:main Merging existing variants '' into variants |
|---|
| 226 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 227 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit |
|---|
| 228 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 229 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 230 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 231 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 232 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 233 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 234 | :debug:main Requested variant no_x11 is not provided by port libedit. |
|---|
| 235 | :debug:main Requested variant quartz is not provided by port libedit. |
|---|
| 236 | :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 |
|---|
| 237 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 238 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 239 | :debug:main db46 4.6.21_6 +java is the latest installed |
|---|
| 240 | :debug:main db46 4.6.21_6 +java is active |
|---|
| 241 | :debug:main Merging existing variants '+java' into variants |
|---|
| 242 | :debug:main new fully merged portvariants: no_x11 + java + quartz + |
|---|
| 243 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 |
|---|
| 244 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 245 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 246 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 247 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 248 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 249 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 250 | :debug:main Requested variant no_x11 is not provided by port db46. |
|---|
| 251 | :debug:main Requested variant quartz is not provided by port db46. |
|---|
| 252 | :debug:main Executing variant java provides java |
|---|
| 253 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 254 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 255 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 256 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 257 | :debug:main bzip2 1.0.6_0 is active |
|---|
| 258 | :debug:main Merging existing variants '' into variants |
|---|
| 259 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 260 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 |
|---|
| 261 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 262 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 263 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 264 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 265 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 266 | :debug:main Requested variant no_x11 is not provided by port bzip2. |
|---|
| 267 | :debug:main Requested variant quartz is not provided by port bzip2. |
|---|
| 268 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 269 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 270 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 271 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 272 | :debug:main python_select 0.3_1 is active |
|---|
| 273 | :debug:main Merging existing variants '' into variants |
|---|
| 274 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 275 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select |
|---|
| 276 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 277 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 278 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 279 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 280 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 281 | :debug:main Requested variant no_x11 is not provided by port python_select. |
|---|
| 282 | :debug:main Requested variant quartz is not provided by port python_select. |
|---|
| 283 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 284 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 285 | :debug:main cairo 1.10.2_4 exists in the ports tree |
|---|
| 286 | :debug:main cairo 1.10.2_4 +quartz is the latest installed |
|---|
| 287 | :debug:main cairo 1.10.2_4 +quartz is active |
|---|
| 288 | :debug:main Merging existing variants '+quartz-x11' into variants |
|---|
| 289 | :debug:main new fully merged portvariants: no_x11 + x11 - quartz + |
|---|
| 290 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo |
|---|
| 291 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 292 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 293 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 294 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 295 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 296 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 297 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 298 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 299 | :debug:main Executing variant quartz provides quartz |
|---|
| 300 | :debug:main Executing variant no_x11 provides no_x11 |
|---|
| 301 | :debug:main Skipping upgrade since cairo 1.10.2_4 >= cairo 1.10.2_4, even though installed variants "+quartz" do not match "+no_x11+quartz". |
|---|
| 302 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 303 | :debug:main libpixman 0.24.0_0 exists in the ports tree |
|---|
| 304 | :debug:main libpixman 0.24.0_0 is the latest installed |
|---|
| 305 | :debug:main libpixman 0.24.0_0 is active |
|---|
| 306 | :debug:main Merging existing variants '' into variants |
|---|
| 307 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 308 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman |
|---|
| 309 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 310 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 311 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 312 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 313 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 314 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 315 | :debug:main Requested variant no_x11 is not provided by port libpixman. |
|---|
| 316 | :debug:main Requested variant quartz is not provided by port libpixman. |
|---|
| 317 | :debug:main No need to upgrade! libpixman 0.24.0_0 >= libpixman 0.24.0_0 |
|---|
| 318 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 319 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 320 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 321 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 322 | :debug:main Merging existing variants '' into variants |
|---|
| 323 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 324 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig |
|---|
| 325 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 326 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 327 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 328 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 329 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 330 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 331 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 332 | :debug:main Requested variant no_x11 is not provided by port fontconfig. |
|---|
| 333 | :debug:main Requested variant quartz is not provided by port fontconfig. |
|---|
| 334 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 335 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 336 | :debug:main freetype 2.4.8_0 exists in the ports tree |
|---|
| 337 | :debug:main freetype 2.4.8_0 is the latest installed |
|---|
| 338 | :debug:main freetype 2.4.8_0 is active |
|---|
| 339 | :debug:main Merging existing variants '' into variants |
|---|
| 340 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 341 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype |
|---|
| 342 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 343 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 344 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 345 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 346 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 347 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 348 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 349 | :debug:main Requested variant no_x11 is not provided by port freetype. |
|---|
| 350 | :debug:main Requested variant quartz is not provided by port freetype. |
|---|
| 351 | :debug:main No need to upgrade! freetype 2.4.8_0 >= freetype 2.4.8_0 |
|---|
| 352 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 353 | :debug:main libpng 1.4.8_0 exists in the ports tree |
|---|
| 354 | :debug:main libpng 1.4.8_0 is the latest installed |
|---|
| 355 | :debug:main libpng 1.4.8_0 is active |
|---|
| 356 | :debug:main Merging existing variants '' into variants |
|---|
| 357 | :debug:main new fully merged portvariants: no_x11 + quartz + |
|---|
| 358 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng |
|---|
| 359 | :debug:main OS darwin/8.11.1 (Mac OS X 10.4) arch i386 |
|---|
| 360 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 361 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 362 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 363 | :debug:main adding the default universal variant |
|---|
| 364 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 365 | :debug:main Requested variant no_x11 is not provided by port libpng. |
|---|
| 366 | :debug:main Requested variant quartz is not provided by port libpng. |
|---|
| 367 | :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 |
|---|
| 368 | :msg:main ---> Computing dependencies for gobject-introspection:info:main .:debug:main Searching for dependency: pkgconfig |
|---|
| 369 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 370 | :debug:main Searching for dependency: cairo |
|---|
| 371 | :debug:main Found Dependency: receipt exists for cairo |
|---|
| 372 | :debug:main Searching for dependency: glib2 |
|---|
| 373 | :debug:main Found Dependency: receipt exists for glib2 |
|---|
| 374 | :debug:main Searching for dependency: libffi |
|---|
| 375 | :debug:main Found Dependency: receipt exists for libffi |
|---|
| 376 | :msg:main |
|---|
| 377 | :debug:main Executing org.macports.main (gobject-introspection) |
|---|
| 378 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 379 | :debug:main egid changed to: 500 |
|---|
| 380 | :debug:main euid changed to: 502 |
|---|
| 381 | :debug:archivefetch archivefetch phase started at Thu Dec 1 22:59:29 CET 2011 |
|---|
| 382 | :msg:archivefetch ---> Fetching archive for gobject-introspection |
|---|
| 383 | :debug:archivefetch Executing org.macports.archivefetch (gobject-introspection) |
|---|
| 384 | :debug:archivefetch Can't run archivefetch on this port without elevated privileges. Escalating privileges back to root. |
|---|
| 385 | :debug:archivefetch euid changed to: 0. egid changed to: 0. |
|---|
| 386 | :debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 387 | :debug:archivefetch egid changed to: 500 |
|---|
| 388 | :debug:archivefetch euid changed to: 502 |
|---|
| 389 | :info:archivefetch ---> gobject-introspection-0.10.8_0.darwin_8.i386.tbz2 doesn't seem to exist in /opt/local/var/macports/software/gobject-introspection |
|---|
| 390 | :msg:archivefetch ---> Attempting to fetch gobject-introspection-0.10.8_0.darwin_8.i386.tbz2 from http://packages.macports.org/gobject-introspection |
|---|
| 391 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 392 | :debug:archivefetch Privilege de-escalation not attempted as not running as root. |
|---|
| 393 | :debug:fetch fetch phase started at Thu Dec 1 22:59:30 CET 2011 |
|---|
| 394 | :notice:fetch ---> Fetching gobject-introspection |
|---|
| 395 | :debug:fetch Can't run fetch on this port without elevated privileges. Escalating privileges back to root. |
|---|
| 396 | :debug:fetch euid changed to: 0. egid changed to: 0. |
|---|
| 397 | :debug:fetch changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 398 | :debug:fetch egid changed to: 500 |
|---|
| 399 | :debug:fetch euid changed to: 502 |
|---|
| 400 | :debug:fetch Executing org.macports.fetch (gobject-introspection) |
|---|
| 401 | :info:fetch ---> gobject-introspection-0.10.8.tar.bz2 doesn't seem to exist in /opt/local/var/macports/distfiles/gobject-introspection |
|---|
| 402 | :debug:fetch Pinging ftp.cse.buffalo.edu... |
|---|
| 403 | :debug:fetch Pinging www.gtlib.cc.gatech.edu... |
|---|
| 404 | :debug:fetch Pinging fr2.rpmfind.net... |
|---|
| 405 | :debug:fetch Pinging mirror.aarnet.edu.au... |
|---|
| 406 | :debug:fetch Pinging ftp.unina.it... |
|---|
| 407 | :debug:fetch Pinging ftp.acc.umu.se... |
|---|
| 408 | :debug:fetch Pinging ftp.belnet.be... |
|---|
| 409 | :debug:fetch Pinging ftp.nara.wide.ad.jp... |
|---|
| 410 | :debug:fetch Pinging ftp.dit.upm.es... |
|---|
| 411 | :debug:fetch Pinging ftp.no.gnome.org... |
|---|
| 412 | :debug:fetch Pinging ftp.kddlabs.co.jp... |
|---|
| 413 | :debug:fetch Pinging mirror.internode.on.net... |
|---|
| 414 | :debug:fetch Pinging ftp.df.lth.se... |
|---|
| 415 | :debug:fetch Pinging linorg.usp.br... |
|---|
| 416 | :debug:fetch Pinging ftp.gnome.org... |
|---|
| 417 | :debug:fetch Pinging distfiles.macports.org... |
|---|
| 418 | :debug:fetch Pinging aarnet.au.distfiles.macports.org... |
|---|
| 419 | :debug:fetch Pinging her.gr.distfiles.macports.org... |
|---|
| 420 | :debug:fetch Pinging jog.id.distfiles.macports.org... |
|---|
| 421 | :debug:fetch Pinging lil.fr.distfiles.macports.org... |
|---|
| 422 | :debug:fetch Pinging sea.us.distfiles.macports.org... |
|---|
| 423 | :debug:fetch Pinging ykf.ca.distfiles.macports.org... |
|---|
| 424 | :debug:fetch ftp.cse.buffalo.edu ping time is 120.792 |
|---|
| 425 | :debug:fetch www.gtlib.cc.gatech.edu ping time is 10000 |
|---|
| 426 | :debug:fetch fr2.rpmfind.net ping time is 10000 |
|---|
| 427 | :debug:fetch mirror.aarnet.edu.au ping time is 356.531 |
|---|
| 428 | :debug:fetch ftp.unina.it ping time is 60.659 |
|---|
| 429 | :debug:fetch ftp.acc.umu.se ping time is 88.526 |
|---|
| 430 | :debug:fetch ftp.belnet.be ping time is 23.396 |
|---|
| 431 | :debug:fetch ftp.nara.wide.ad.jp ping time is 295.467 |
|---|
| 432 | :debug:fetch ftp.dit.upm.es ping time is 57.420 |
|---|
| 433 | :debug:fetch ftp.no.gnome.org ping time is 10000 |
|---|
| 434 | :debug:fetch ftp.kddlabs.co.jp ping time is 10000 |
|---|
| 435 | :debug:fetch mirror.internode.on.net ping time is 344.254 |
|---|
| 436 | :debug:fetch ftp.df.lth.se ping time is 80.418 |
|---|
| 437 | :debug:fetch linorg.usp.br ping time is 245.181 |
|---|
| 438 | :debug:fetch ftp.gnome.org ping time is 81.509 |
|---|
| 439 | :debug:fetch distfiles.macports.org ping time is 172.042 |
|---|
| 440 | :debug:fetch aarnet.au.distfiles.macports.org ping time is 357.479 |
|---|
| 441 | :debug:fetch her.gr.distfiles.macports.org ping time is 96.756 |
|---|
| 442 | :debug:fetch jog.id.distfiles.macports.org ping time is 370.486 |
|---|
| 443 | :debug:fetch lil.fr.distfiles.macports.org ping time is 29.660 |
|---|
| 444 | :debug:fetch sea.us.distfiles.macports.org ping time is 10000 |
|---|
| 445 | :debug:fetch ykf.ca.distfiles.macports.org ping time is 133.184 |
|---|
| 446 | :notice:fetch ---> Attempting to fetch gobject-introspection-0.10.8.tar.bz2 from http://ftp.belnet.be/mirror/ftp.gnome.org/sources/gobject-introspection/0.10/ |
|---|
| 447 | :debug:fetch Privilege de-escalation not attempted as not running as root. |
|---|
| 448 | :debug:checksum checksum phase started at Thu Dec 1 22:59:35 CET 2011 |
|---|
| 449 | :notice:checksum ---> Verifying checksum(s) for gobject-introspection |
|---|
| 450 | :debug:checksum Executing org.macports.checksum (gobject-introspection) |
|---|
| 451 | :info:checksum ---> Checksumming gobject-introspection-0.10.8.tar.bz2 |
|---|
| 452 | :debug:checksum Correct (rmd160) checksum for gobject-introspection-0.10.8.tar.bz2 |
|---|
| 453 | :debug:checksum Correct (sha256) checksum for gobject-introspection-0.10.8.tar.bz2 |
|---|
| 454 | :debug:checksum Privilege de-escalation not attempted as not running as root. |
|---|
| 455 | :debug:extract extract phase started at Thu Dec 1 22:59:35 CET 2011 |
|---|
| 456 | :notice:extract ---> Extracting gobject-introspection |
|---|
| 457 | :debug:extract setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 458 | :debug:extract Executing org.macports.extract (gobject-introspection) |
|---|
| 459 | :info:extract ---> Extracting gobject-introspection-0.10.8.tar.bz2 |
|---|
| 460 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/gobject-introspection/gobject-introspection-0.10.8.tar.bz2' |
|---|
| 461 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.4' |
|---|
| 462 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/gobject-introspection/gobject-introspection-0.10.8.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 463 | :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/gobject-introspection/gobject-introspection-0.10.8.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - |
|---|
| 464 | :debug:extract euid/egid changed to: 0/0 |
|---|
| 465 | :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work to macports |
|---|
| 466 | :debug:extract euid/egid changed to: 502/500 |
|---|
| 467 | :debug:extract Privilege de-escalation not attempted as not running as root. |
|---|
| 468 | :debug:patch patch phase started at Thu Dec 1 22:59:36 CET 2011 |
|---|
| 469 | :debug:patch Executing org.macports.patch (gobject-introspection) |
|---|
| 470 | :notice:patch ---> Applying patches to gobject-introspection |
|---|
| 471 | :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gobject-introspection/files/patch-giscanner-sourcescanner.py.diff |
|---|
| 472 | :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.4' |
|---|
| 473 | :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && /usr/bin/patch -p0' |
|---|
| 474 | :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gobject-introspection/files/patch-giscanner-sourcescanner.py.diff' |
|---|
| 475 | :info:patch patching file giscanner/sourcescanner.py |
|---|
| 476 | :debug:patch Privilege de-escalation not attempted as not running as root. |
|---|
| 477 | :debug:configure configure phase started at Thu Dec 1 22:59:36 CET 2011 |
|---|
| 478 | :notice:configure ---> Configuring gobject-introspection |
|---|
| 479 | :debug:configure Using compiler 'Mac OS X gcc 4.0' |
|---|
| 480 | :debug:configure Executing org.macports.configure (gobject-introspection) |
|---|
| 481 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.4' CXX='/usr/bin/g++-4.0' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m32' LDFLAGS='-L/opt/local/lib -arch i386' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-pipe -O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch i386' FFLAGS='-pipe -O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.0' |
|---|
| 482 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && ./configure --prefix=/opt/local' |
|---|
| 483 | :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && ./configure --prefix=/opt/local |
|---|
| 484 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 485 | :info:configure checking whether build environment is sane... yes |
|---|
| 486 | :info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p |
|---|
| 487 | :info:configure checking for gawk... gawk |
|---|
| 488 | :info:configure checking whether make sets $(MAKE)... yes |
|---|
| 489 | :info:configure checking whether to enable maintainer-specific portions of Makefiles... no |
|---|
| 490 | :info:configure checking build system type... i386-apple-darwin8.11.1 |
|---|
| 491 | :info:configure checking host system type... i386-apple-darwin8.11.1 |
|---|
| 492 | :info:configure checking for Win32... no |
|---|
| 493 | :info:configure checking for gcc... /usr/bin/gcc-4.0 |
|---|
| 494 | :info:configure checking for C compiler default output file name... a.out |
|---|
| 495 | :info:configure checking whether the C compiler works... yes |
|---|
| 496 | :info:configure checking whether we are cross compiling... no |
|---|
| 497 | :info:configure checking for suffix of executables... |
|---|
| 498 | :info:configure checking for suffix of object files... o |
|---|
| 499 | :info:configure checking whether we are using the GNU C compiler... yes |
|---|
| 500 | :info:configure checking whether /usr/bin/gcc-4.0 accepts -g... yes |
|---|
| 501 | :info:configure checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed |
|---|
| 502 | :info:configure checking for style of include used by make... GNU |
|---|
| 503 | :info:configure checking dependency style of /usr/bin/gcc-4.0... gcc3 |
|---|
| 504 | :info:configure checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes |
|---|
| 505 | :info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed |
|---|
| 506 | :info:configure checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 507 | :info:configure checking for egrep... /usr/bin/grep -E |
|---|
| 508 | :info:configure checking for fgrep... /usr/bin/grep -F |
|---|
| 509 | :info:configure checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld |
|---|
| 510 | :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld) is GNU ld... no |
|---|
| 511 | :info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p |
|---|
| 512 | :info:configure checking the name lister (/usr/bin/nm -p) interface... BSD nm |
|---|
| 513 | :info:configure checking whether ln -s works... yes |
|---|
| 514 | :info:configure checking the maximum length of command line arguments... 196608 |
|---|
| 515 | :info:configure checking whether the shell understands some XSI constructs... yes |
|---|
| 516 | :info:configure checking whether the shell understands "+="... no |
|---|
| 517 | :info:configure checking for /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld option to reload object files... -r |
|---|
| 518 | :info:configure checking for objdump... no |
|---|
| 519 | :info:configure checking how to recognize dependent libraries... pass_all |
|---|
| 520 | :info:configure checking for ar... ar |
|---|
| 521 | :info:configure checking for strip... strip |
|---|
| 522 | :info:configure checking for ranlib... ranlib |
|---|
| 523 | :info:configure checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok |
|---|
| 524 | :info:configure checking for dsymutil... dsymutil |
|---|
| 525 | :info:configure checking for nmedit... nmedit |
|---|
| 526 | :info:configure checking for lipo... lipo |
|---|
| 527 | :info:configure checking for otool... otool |
|---|
| 528 | :info:configure checking for otool64... otool64 |
|---|
| 529 | :info:configure checking for -single_module linker flag... yes |
|---|
| 530 | :info:configure checking for -exported_symbols_list linker flag... yes |
|---|
| 531 | :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E |
|---|
| 532 | :info:configure checking for ANSI C header files... yes |
|---|
| 533 | :info:configure checking for sys/types.h... yes |
|---|
| 534 | :info:configure checking for sys/stat.h... yes |
|---|
| 535 | :info:configure checking for stdlib.h... yes |
|---|
| 536 | :info:configure checking for string.h... yes |
|---|
| 537 | :info:configure checking for memory.h... yes |
|---|
| 538 | :info:configure checking for strings.h... yes |
|---|
| 539 | :info:configure checking for inttypes.h... yes |
|---|
| 540 | :info:configure checking for stdint.h... yes |
|---|
| 541 | :info:configure checking for unistd.h... yes |
|---|
| 542 | :info:configure checking for dlfcn.h... yes |
|---|
| 543 | :info:configure checking for objdir... .libs |
|---|
| 544 | :info:configure checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no |
|---|
| 545 | :info:configure checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC |
|---|
| 546 | :info:configure checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes |
|---|
| 547 | :info:configure checking if /usr/bin/gcc-4.0 static flag -static works... no |
|---|
| 548 | :info:configure checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes |
|---|
| 549 | :info:configure checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes |
|---|
| 550 | :info:configure checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld) supports shared libraries... yes |
|---|
| 551 | :info:configure checking dynamic linker characteristics... darwin8.11.1 dyld |
|---|
| 552 | :info:configure checking how to hardcode library paths into programs... immediate |
|---|
| 553 | :info:configure checking whether stripping libraries is possible... yes |
|---|
| 554 | :info:configure checking if libtool supports shared libraries... yes |
|---|
| 555 | :info:configure checking whether to build shared libraries... yes |
|---|
| 556 | :info:configure checking whether to build static libraries... yes |
|---|
| 557 | :info:configure checking for pkg-config... /opt/local/bin/pkg-config |
|---|
| 558 | :info:configure checking pkg-config is at least version 0.9.0... yes |
|---|
| 559 | :info:configure checking for flex... flex |
|---|
| 560 | :info:configure checking lex output file root... lex.yy |
|---|
| 561 | :info:configure checking lex library... -lfl |
|---|
| 562 | :info:configure checking whether yytext is a pointer... yes |
|---|
| 563 | :info:configure checking for bison... bison -y |
|---|
| 564 | :info:configure checking for dlopen in -ldl... yes |
|---|
| 565 | :info:configure checking for the suffix of shared libraries... .dylib |
|---|
| 566 | :info:configure checking for GLIB... yes |
|---|
| 567 | :info:configure checking for GOBJECT... yes |
|---|
| 568 | :info:configure checking for GIO... yes |
|---|
| 569 | :info:configure checking for GIO_UNIX... yes |
|---|
| 570 | :info:configure checking for CAIRO... yes |
|---|
| 571 | :info:configure checking for CAIRO_GOBJECT... yes |
|---|
| 572 | :info:configure checking for SCANNER... yes |
|---|
| 573 | :info:configure checking for FFI... yes |
|---|
| 574 | :info:configure checking size of char... 1 |
|---|
| 575 | :info:configure checking size of short... 2 |
|---|
| 576 | :info:configure checking size of int... 4 |
|---|
| 577 | :info:configure checking size of long... 4 |
|---|
| 578 | :info:configure checking for GIREPO... yes |
|---|
| 579 | :info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check |
|---|
| 580 | :info:configure checking for gtkdoc-rebase... /opt/local/bin/gtkdoc-rebase |
|---|
| 581 | :info:configure checking for gtkdoc-mkpdf... /opt/local/bin/gtkdoc-mkpdf |
|---|
| 582 | :info:configure checking whether to build gtk-doc documentation... no |
|---|
| 583 | :info:configure checking for ANSI C header files... (cached) yes |
|---|
| 584 | :info:configure checking fcntl.h usability... yes |
|---|
| 585 | :info:configure checking fcntl.h presence... yes |
|---|
| 586 | :info:configure checking for fcntl.h... yes |
|---|
| 587 | :info:configure checking for stdlib.h... (cached) yes |
|---|
| 588 | :info:configure checking for string.h... (cached) yes |
|---|
| 589 | :info:configure checking for an ANSI C-conforming const... yes |
|---|
| 590 | :info:configure checking for working strtod... yes |
|---|
| 591 | :info:configure checking for memchr... yes |
|---|
| 592 | :info:configure checking for strchr... yes |
|---|
| 593 | :info:configure checking for strspn... yes |
|---|
| 594 | :info:configure checking for strstr... yes |
|---|
| 595 | :info:configure checking for strtol... yes |
|---|
| 596 | :info:configure checking for strtoull... yes |
|---|
| 597 | :info:configure checking for backtrace... no |
|---|
| 598 | :info:configure checking for backtrace_symbols... no |
|---|
| 599 | :info:configure checking whether Python support is requested... checking for a Python interpreter with version >= 2.5... python2.5 |
|---|
| 600 | :info:configure checking for python2.5... /opt/local/bin/python2.5 |
|---|
| 601 | :info:configure checking for python2.5 version... 2.5 |
|---|
| 602 | :info:configure checking for python2.5 platform... darwin |
|---|
| 603 | :info:configure checking for python2.5 script directory... ${prefix}/lib/python2.5/site-packages |
|---|
| 604 | :info:configure checking for python2.5 extension module directory... ${exec_prefix}/lib/python2.5/site-packages |
|---|
| 605 | :info:configure checking for headers required to compile python extensions... found |
|---|
| 606 | :info:configure checking for glib source directory to use for documentation... |
|---|
| 607 | :info:configure configure: creating ./config.status |
|---|
| 608 | :info:configure config.status: creating Makefile |
|---|
| 609 | :info:configure config.status: creating giscanner/config.py |
|---|
| 610 | :info:configure config.status: creating m4/Makefile |
|---|
| 611 | :info:configure config.status: creating tests/Makefile |
|---|
| 612 | :info:configure config.status: creating tests/offsets/Makefile |
|---|
| 613 | :info:configure config.status: creating tests/scanner/Makefile |
|---|
| 614 | :info:configure config.status: creating tests/repository/Makefile |
|---|
| 615 | :info:configure config.status: creating tests/warn/Makefile |
|---|
| 616 | :info:configure config.status: creating docs/Makefile |
|---|
| 617 | :info:configure config.status: creating docs/reference/Makefile |
|---|
| 618 | :info:configure config.status: creating gobject-introspection-1.0.pc |
|---|
| 619 | :info:configure config.status: creating gobject-introspection-no-export-1.0.pc |
|---|
| 620 | :info:configure config.status: creating config.h |
|---|
| 621 | :info:configure config.status: executing depfiles commands |
|---|
| 622 | :info:configure config.status: executing libtool commands |
|---|
| 623 | :debug:configure Privilege de-escalation not attempted as not running as root. |
|---|
| 624 | :debug:build build phase started at Thu Dec 1 23:00:05 CET 2011 |
|---|
| 625 | :notice:build ---> Building gobject-introspection |
|---|
| 626 | :debug:build Executing org.macports.build (gobject-introspection) |
|---|
| 627 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.4' |
|---|
| 628 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && /usr/bin/make -j2 -w all CC=/usr/bin/gcc-4.0' |
|---|
| 629 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && /usr/bin/make -j2 -w all CC=/usr/bin/gcc-4.0 |
|---|
| 630 | :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8' |
|---|
| 631 | :info:build Makefile:2712: *** Need to define GLib_2_0_gir_LIBS or GLib_2_0_gir_PROGRAM. Stop. |
|---|
| 632 | :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8' |
|---|
| 633 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.8" && /usr/bin/make -j2 -w all CC=/usr/bin/gcc-4.0 " returned error 2 |
|---|
| 634 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 635 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 636 | while executing |
|---|
| 637 | "command_exec build" |
|---|
| 638 | (procedure "portbuild::build_main" line 8) |
|---|
| 639 | invoked from within |
|---|
| 640 | "$procedure $targetname" |
|---|
| 641 | :info:build Warning: the following items did not execute (for gobject-introspection): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 642 | :notice:build Log for gobject-introspection is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/main.log |
|---|
