1 | $ sudo port selfupdate |
---|
2 | Password: |
---|
3 | ---> Updating MacPorts base sources using rsync |
---|
4 | MacPorts base version 2.0.3 installed, |
---|
5 | MacPorts base version 2.0.3 downloaded. |
---|
6 | ---> Updating the ports tree |
---|
7 | ---> MacPorts base is already the latest version |
---|
8 | |
---|
9 | The ports tree has been updated. To upgrade your installed ports, you should run |
---|
10 | port upgrade outdated |
---|
11 | $ |
---|
12 | $ sudo port upgrade outdated |
---|
13 | Password: |
---|
14 | ---> Computing dependencies for openssl |
---|
15 | ---> Fetching archive for openssl |
---|
16 | ---> Attempting to fetch openssl-1.0.0f_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/openssl |
---|
17 | ---> Fetching openssl |
---|
18 | ---> Attempting to fetch openssl-1.0.0f.tar.gz from http://www.openssl.org/source/ |
---|
19 | ---> Verifying checksum(s) for openssl |
---|
20 | ---> Extracting openssl |
---|
21 | ---> Applying patches to openssl |
---|
22 | ---> Configuring openssl |
---|
23 | ---> Building openssl |
---|
24 | ---> Staging openssl into destroot |
---|
25 | ---> Installing openssl @1.0.0f_0 |
---|
26 | ---> Cleaning openssl |
---|
27 | ---> Computing dependencies for openssl |
---|
28 | ---> Deactivating openssl @1.0.0e_1 |
---|
29 | ---> Cleaning openssl |
---|
30 | ---> Activating openssl @1.0.0f_0 |
---|
31 | ---> Cleaning openssl |
---|
32 | ---> Computing dependencies for gdbm |
---|
33 | ---> Fetching archive for gdbm |
---|
34 | ---> Attempting to fetch gdbm-1.10_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/gdbm |
---|
35 | ---> Fetching gdbm |
---|
36 | ---> Verifying checksum(s) for gdbm |
---|
37 | ---> Extracting gdbm |
---|
38 | ---> Configuring gdbm |
---|
39 | ---> Building gdbm |
---|
40 | ---> Staging gdbm into destroot |
---|
41 | ---> Installing gdbm @1.10_1 |
---|
42 | ---> Cleaning gdbm |
---|
43 | ---> Computing dependencies for gdbm |
---|
44 | ---> Deactivating gdbm @1.10_0 |
---|
45 | ---> Cleaning gdbm |
---|
46 | ---> Activating gdbm @1.10_1 |
---|
47 | ---> Cleaning gdbm |
---|
48 | ---> Computing dependencies for perl5.12 |
---|
49 | ---> Fetching archive for perl5.12 |
---|
50 | ---> Attempting to fetch perl5.12-5.12.3_3.darwin_11.x86_64.tbz2 from http://packages.macports.org/perl5.12 |
---|
51 | ---> Fetching perl5.12 |
---|
52 | ---> Verifying checksum(s) for perl5.12 |
---|
53 | ---> Extracting perl5.12 |
---|
54 | ---> Applying patches to perl5.12 |
---|
55 | ---> Configuring perl5.12 |
---|
56 | ---> Building perl5.12 |
---|
57 | ---> Staging perl5.12 into destroot |
---|
58 | ---> Installing perl5.12 @5.12.3_3 |
---|
59 | ---> Cleaning perl5.12 |
---|
60 | ---> Computing dependencies for perl5.12 |
---|
61 | ---> Deactivating perl5.12 @5.12.3_2 |
---|
62 | ---> Cleaning perl5.12 |
---|
63 | ---> Activating perl5.12 @5.12.3_3 |
---|
64 | ---> Cleaning perl5.12 |
---|
65 | ---> Computing dependencies for attica |
---|
66 | ---> Fetching archive for attica |
---|
67 | ---> Attempting to fetch attica-0.3.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/attica |
---|
68 | ---> Fetching attica |
---|
69 | ---> Attempting to fetch attica-0.3.0.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/attica |
---|
70 | ---> Verifying checksum(s) for attica |
---|
71 | ---> Extracting attica |
---|
72 | ---> Configuring attica |
---|
73 | ---> Building attica |
---|
74 | ---> Staging attica into destroot |
---|
75 | ---> Installing attica @0.3.0_0 |
---|
76 | ---> Cleaning attica |
---|
77 | ---> Computing dependencies for attica |
---|
78 | ---> Deactivating attica @0.2.9_0 |
---|
79 | ---> Cleaning attica |
---|
80 | ---> Activating attica @0.3.0_0 |
---|
81 | ########################################################## |
---|
82 | # Don't forget that dbus needs to be started as the local |
---|
83 | # user (not with sudo) before any KDE programs will launch |
---|
84 | # To start it run the following command: |
---|
85 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
86 | ########################################################## |
---|
87 | |
---|
88 | ###################################################### |
---|
89 | # Programs will not start until you run the command |
---|
90 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
91 | # replacing $USER with your username. |
---|
92 | ###################################################### |
---|
93 | ---> Cleaning attica |
---|
94 | ---> Computing dependencies for audiofile |
---|
95 | ---> Fetching archive for audiofile |
---|
96 | ---> Attempting to fetch audiofile-0.3.2_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/audiofile |
---|
97 | ---> Fetching audiofile |
---|
98 | ---> Attempting to fetch audiofile-0.3.2.tar.gz from http://lil.fr.distfiles.macports.org/audiofile |
---|
99 | ---> Verifying checksum(s) for audiofile |
---|
100 | ---> Extracting audiofile |
---|
101 | ---> Configuring audiofile |
---|
102 | ---> Building audiofile |
---|
103 | ---> Staging audiofile into destroot |
---|
104 | ---> Installing audiofile @0.3.2_0 |
---|
105 | ---> Cleaning audiofile |
---|
106 | ---> Deactivating audiofile @0.2.7_1 |
---|
107 | ---> Cleaning audiofile |
---|
108 | ---> Activating audiofile @0.3.2_0 |
---|
109 | ---> Cleaning audiofile |
---|
110 | ---> Computing dependencies for automake |
---|
111 | ---> Fetching archive for automake |
---|
112 | ---> Attempting to fetch automake-1.11.2_0.darwin_11.noarch.tbz2 from http://packages.macports.org/automake |
---|
113 | ---> Fetching automake |
---|
114 | ---> Attempting to fetch automake-1.11.2.tar.bz2 from http://lil.fr.distfiles.macports.org/automake |
---|
115 | ---> Verifying checksum(s) for automake |
---|
116 | ---> Extracting automake |
---|
117 | ---> Configuring automake |
---|
118 | ---> Building automake |
---|
119 | ---> Staging automake into destroot |
---|
120 | ---> Installing automake @1.11.2_0 |
---|
121 | ---> Cleaning automake |
---|
122 | ---> Computing dependencies for automake |
---|
123 | ---> Deactivating automake @1.11.1_0 |
---|
124 | ---> Cleaning automake |
---|
125 | ---> Activating automake @1.11.2_0 |
---|
126 | ---> Cleaning automake |
---|
127 | ---> Computing dependencies for boost |
---|
128 | ---> Fetching archive for boost |
---|
129 | ---> Attempting to fetch boost-1.48.0_3.darwin_11.x86_64.tbz2 from http://packages.macports.org/boost |
---|
130 | ---> Fetching boost |
---|
131 | ---> Verifying checksum(s) for boost |
---|
132 | ---> Extracting boost |
---|
133 | ---> Applying patches to boost |
---|
134 | ---> Configuring boost |
---|
135 | ---> Building boost |
---|
136 | ---> Staging boost into destroot |
---|
137 | ---> Installing boost @1.48.0_3 |
---|
138 | ---> Cleaning boost |
---|
139 | ---> Computing dependencies for boost |
---|
140 | ---> Deactivating boost @1.48.0_2 |
---|
141 | ---> Cleaning boost |
---|
142 | ---> Activating boost @1.48.0_3 |
---|
143 | ---> Cleaning boost |
---|
144 | ---> Computing dependencies for dcraw |
---|
145 | ---> Fetching archive for dcraw |
---|
146 | ---> Attempting to fetch dcraw-9.12-20111226123200_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/dcraw |
---|
147 | ---> Fetching dcraw |
---|
148 | ---> Attempting to fetch dcraw-9.12.tar.gz from http://lil.fr.distfiles.macports.org/dcraw/9.12-20111226123200 |
---|
149 | ---> Verifying checksum(s) for dcraw |
---|
150 | ---> Extracting dcraw |
---|
151 | ---> Configuring dcraw |
---|
152 | ---> Building dcraw |
---|
153 | ---> Staging dcraw into destroot |
---|
154 | ---> Installing dcraw @9.12-20111226123200_0 |
---|
155 | ---> Cleaning dcraw |
---|
156 | ---> Computing dependencies for dcraw |
---|
157 | ---> Deactivating dcraw @9.11-20111006211100_0 |
---|
158 | ---> Cleaning dcraw |
---|
159 | ---> Activating dcraw @9.12-20111226123200_0 |
---|
160 | ---> Cleaning dcraw |
---|
161 | ---> Computing dependencies for gd2 |
---|
162 | ---> Fetching archive for gd2 |
---|
163 | ---> Attempting to fetch gd2-2.0.35_11.darwin_11.x86_64.tbz2 from http://packages.macports.org/gd2 |
---|
164 | ---> Fetching gd2 |
---|
165 | ---> Verifying checksum(s) for gd2 |
---|
166 | ---> Extracting gd2 |
---|
167 | ---> Applying patches to gd2 |
---|
168 | ---> Configuring gd2 |
---|
169 | ---> Building gd2 |
---|
170 | ---> Staging gd2 into destroot |
---|
171 | ---> Installing gd2 @2.0.35_11 |
---|
172 | ---> Cleaning gd2 |
---|
173 | ---> Computing dependencies for gd2 |
---|
174 | ---> Deactivating gd2 @2.0.35_10 |
---|
175 | ---> Cleaning gd2 |
---|
176 | ---> Activating gd2 @2.0.35_11 |
---|
177 | ---> Cleaning gd2 |
---|
178 | ---> Computing dependencies for iso-codes |
---|
179 | ---> Fetching archive for iso-codes |
---|
180 | ---> Attempting to fetch iso-codes-3.31_0.darwin_11.noarch.tbz2 from http://packages.macports.org/iso-codes |
---|
181 | ---> Fetching iso-codes |
---|
182 | ---> Attempting to fetch iso-codes_3.31.orig.tar.bz2 from http://lil.fr.distfiles.macports.org/iso-codes |
---|
183 | ---> Verifying checksum(s) for iso-codes |
---|
184 | ---> Extracting iso-codes |
---|
185 | ---> Configuring iso-codes |
---|
186 | ---> Building iso-codes |
---|
187 | ---> Staging iso-codes into destroot |
---|
188 | ---> Installing iso-codes @3.31_0 |
---|
189 | ---> Cleaning iso-codes |
---|
190 | ---> Deactivating iso-codes @3.29_0 |
---|
191 | ---> Cleaning iso-codes |
---|
192 | ---> Activating iso-codes @3.31_0 |
---|
193 | ---> Cleaning iso-codes |
---|
194 | ---> Computing dependencies for raptor2 |
---|
195 | ---> Fetching archive for raptor2 |
---|
196 | ---> Attempting to fetch raptor2-2.0.6_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/raptor2 |
---|
197 | ---> Fetching raptor2 |
---|
198 | ---> Attempting to fetch raptor2-2.0.6.tar.gz from http://lil.fr.distfiles.macports.org/raptor2 |
---|
199 | ---> Verifying checksum(s) for raptor2 |
---|
200 | ---> Extracting raptor2 |
---|
201 | ---> Configuring raptor2 |
---|
202 | ---> Building raptor2 |
---|
203 | ---> Staging raptor2 into destroot |
---|
204 | ---> Installing raptor2 @2.0.6_0 |
---|
205 | ---> Cleaning raptor2 |
---|
206 | ---> Computing dependencies for raptor2 |
---|
207 | ---> Deactivating raptor2 @2.0.4_1 |
---|
208 | ---> Cleaning raptor2 |
---|
209 | ---> Activating raptor2 @2.0.6_0 |
---|
210 | ---> Cleaning raptor2 |
---|
211 | ---> Computing dependencies for rasqal |
---|
212 | ---> Fetching archive for rasqal |
---|
213 | ---> Attempting to fetch rasqal-0.9.28_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/rasqal |
---|
214 | ---> Fetching rasqal |
---|
215 | ---> Attempting to fetch rasqal-0.9.28.tar.gz from http://lil.fr.distfiles.macports.org/rasqal |
---|
216 | ---> Verifying checksum(s) for rasqal |
---|
217 | ---> Extracting rasqal |
---|
218 | ---> Configuring rasqal |
---|
219 | ---> Building rasqal |
---|
220 | ---> Staging rasqal into destroot |
---|
221 | ---> Installing rasqal @0.9.28_0 |
---|
222 | ---> Cleaning rasqal |
---|
223 | ---> Computing dependencies for rasqal |
---|
224 | ---> Deactivating rasqal @0.9.26_3 |
---|
225 | ---> Cleaning rasqal |
---|
226 | ---> Activating rasqal @0.9.28_0 |
---|
227 | ---> Cleaning rasqal |
---|
228 | ---> Computing dependencies for redland |
---|
229 | ---> Fetching archive for redland |
---|
230 | ---> Attempting to fetch redland-1.0.15_0+db46.darwin_11.x86_64.tbz2 from http://packages.macports.org/redland |
---|
231 | ---> Fetching redland |
---|
232 | ---> Attempting to fetch redland-1.0.15.tar.gz from http://lil.fr.distfiles.macports.org/redland |
---|
233 | ---> Verifying checksum(s) for redland |
---|
234 | ---> Extracting redland |
---|
235 | ---> Applying patches to redland |
---|
236 | ---> Configuring redland |
---|
237 | ---> Building redland |
---|
238 | ---> Staging redland into destroot |
---|
239 | ---> Installing redland @1.0.15_0+db46 |
---|
240 | ---> Cleaning redland |
---|
241 | ---> Computing dependencies for redland |
---|
242 | ---> Deactivating redland @1.0.14_1+db46 |
---|
243 | ---> Cleaning redland |
---|
244 | ---> Activating redland @1.0.15_0+db46 |
---|
245 | ---> Cleaning redland |
---|
246 | ---> Computing dependencies for soprano |
---|
247 | ---> Fetching archive for soprano |
---|
248 | ---> Attempting to fetch soprano-2.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/soprano |
---|
249 | ---> Fetching soprano |
---|
250 | ---> Attempting to fetch soprano-2.7.4.tar.bz2 from http://lil.fr.distfiles.macports.org/soprano |
---|
251 | ---> Verifying checksum(s) for soprano |
---|
252 | ---> Extracting soprano |
---|
253 | ---> Applying patches to soprano |
---|
254 | ---> Configuring soprano |
---|
255 | ---> Building soprano |
---|
256 | ---> Staging soprano into destroot |
---|
257 | ---> Installing soprano @2.7.4_0 |
---|
258 | ---> Cleaning soprano |
---|
259 | ---> Computing dependencies for soprano |
---|
260 | ---> Deactivating soprano @2.7.0_0 |
---|
261 | ---> Cleaning soprano |
---|
262 | ---> Activating soprano @2.7.4_0 |
---|
263 | ########################################################## |
---|
264 | # Don't forget that dbus needs to be started as the local |
---|
265 | # user (not with sudo) before any KDE programs will launch |
---|
266 | # To start it run the following command: |
---|
267 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
268 | ########################################################## |
---|
269 | |
---|
270 | ###################################################### |
---|
271 | # Programs will not start until you run the command |
---|
272 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
273 | # replacing $USER with your username. |
---|
274 | ###################################################### |
---|
275 | ---> Cleaning soprano |
---|
276 | ---> Fetching archive for xorg-inputproto |
---|
277 | ---> Attempting to fetch xorg-inputproto-2.1_0.darwin_11.noarch.tbz2 from http://packages.macports.org/xorg-inputproto |
---|
278 | ---> Fetching xorg-inputproto |
---|
279 | ---> Attempting to fetch inputproto-2.1.tar.bz2 from http://mirror.switch.ch/ftp/mirror/X11/pub/individual/proto/ |
---|
280 | ---> Verifying checksum(s) for xorg-inputproto |
---|
281 | ---> Extracting xorg-inputproto |
---|
282 | ---> Configuring xorg-inputproto |
---|
283 | ---> Building xorg-inputproto |
---|
284 | ---> Staging xorg-inputproto into destroot |
---|
285 | ---> Installing xorg-inputproto @2.1_0 |
---|
286 | ---> Cleaning xorg-inputproto |
---|
287 | ---> Deactivating xorg-inputproto @2.0.99.1_0 |
---|
288 | ---> Cleaning xorg-inputproto |
---|
289 | ---> Activating xorg-inputproto @2.1_0 |
---|
290 | ---> Cleaning xorg-inputproto |
---|
291 | ---> Computing dependencies for xorg-libXi |
---|
292 | ---> Fetching archive for xorg-libXi |
---|
293 | ---> Attempting to fetch xorg-libXi-1.5.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/xorg-libXi |
---|
294 | ---> Fetching xorg-libXi |
---|
295 | ---> Attempting to fetch libXi-1.5.0.tar.bz2 from http://mirror.switch.ch/ftp/mirror/X11/pub/individual/lib/ |
---|
296 | ---> Verifying checksum(s) for xorg-libXi |
---|
297 | ---> Extracting xorg-libXi |
---|
298 | ---> Configuring xorg-libXi |
---|
299 | ---> Building xorg-libXi |
---|
300 | ---> Staging xorg-libXi into destroot |
---|
301 | ---> Installing xorg-libXi @1.5.0_0 |
---|
302 | ---> Cleaning xorg-libXi |
---|
303 | ---> Computing dependencies for xorg-libXi |
---|
304 | ---> Deactivating xorg-libXi @1.4.3_0 |
---|
305 | ---> Cleaning xorg-libXi |
---|
306 | ---> Activating xorg-libXi @1.5.0_0 |
---|
307 | ---> Cleaning xorg-libXi |
---|
308 | ---> Computing dependencies for kdelibs4 |
---|
309 | ---> Fetching archive for kdelibs4 |
---|
310 | ---> Attempting to fetch kdelibs4-4.7.4_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/kdelibs4 |
---|
311 | ---> Fetching kdelibs4 |
---|
312 | ---> Attempting to fetch kdelibs-4.7.4.tar.bz2 from http://lil.fr.distfiles.macports.org/kdelibs4 |
---|
313 | ---> Verifying checksum(s) for kdelibs4 |
---|
314 | ---> Extracting kdelibs4 |
---|
315 | ---> Applying patches to kdelibs4 |
---|
316 | ---> Configuring kdelibs4 |
---|
317 | ---> Building kdelibs4 |
---|
318 | ---> Staging kdelibs4 into destroot |
---|
319 | ---> Installing kdelibs4 @4.7.4_1 |
---|
320 | ---> Cleaning kdelibs4 |
---|
321 | ---> Computing dependencies for kdelibs4 |
---|
322 | ---> Deactivating kdelibs4 @4.7.3_0 |
---|
323 | ---> Cleaning kdelibs4 |
---|
324 | ---> Activating kdelibs4 @4.7.4_1 |
---|
325 | ########################################################## |
---|
326 | # Don't forget that dbus needs to be started as the local |
---|
327 | # user (not with sudo) before any KDE programs will launch |
---|
328 | # To start it run the following command: |
---|
329 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
330 | ########################################################## |
---|
331 | |
---|
332 | ###################################################### |
---|
333 | # Programs will not start until you run the command |
---|
334 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
335 | # replacing $USER with your username. |
---|
336 | ###################################################### |
---|
337 | ---> Cleaning kdelibs4 |
---|
338 | ---> Computing dependencies for kdepimlibs4 |
---|
339 | ---> Fetching archive for kdepimlibs4 |
---|
340 | ---> Attempting to fetch kdepimlibs4-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/kdepimlibs4 |
---|
341 | ---> Fetching kdepimlibs4 |
---|
342 | ---> Attempting to fetch kdepimlibs-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
343 | ---> Verifying checksum(s) for kdepimlibs4 |
---|
344 | ---> Extracting kdepimlibs4 |
---|
345 | ---> Configuring kdepimlibs4 |
---|
346 | ---> Building kdepimlibs4 |
---|
347 | ---> Staging kdepimlibs4 into destroot |
---|
348 | ---> Installing kdepimlibs4 @4.7.4_0 |
---|
349 | ---> Cleaning kdepimlibs4 |
---|
350 | ---> Computing dependencies for kdepimlibs4 |
---|
351 | ---> Deactivating kdepimlibs4 @4.7.3_0 |
---|
352 | ---> Cleaning kdepimlibs4 |
---|
353 | ---> Activating kdepimlibs4 @4.7.4_0 |
---|
354 | ########################################################## |
---|
355 | # Don't forget that dbus needs to be started as the local |
---|
356 | # user (not with sudo) before any KDE programs will launch |
---|
357 | # To start it run the following command: |
---|
358 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
359 | ########################################################## |
---|
360 | |
---|
361 | ###################################################### |
---|
362 | # Programs will not start until you run the command |
---|
363 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
364 | # replacing $USER with your username. |
---|
365 | ###################################################### |
---|
366 | ---> Cleaning kdepimlibs4 |
---|
367 | ---> Computing dependencies for libkdcraw |
---|
368 | ---> Fetching archive for libkdcraw |
---|
369 | ---> Attempting to fetch libkdcraw-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkdcraw |
---|
370 | ---> Fetching libkdcraw |
---|
371 | ---> Attempting to fetch libkdcraw-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
372 | ---> Verifying checksum(s) for libkdcraw |
---|
373 | ---> Extracting libkdcraw |
---|
374 | ---> Configuring libkdcraw |
---|
375 | ---> Building libkdcraw |
---|
376 | ---> Staging libkdcraw into destroot |
---|
377 | ---> Installing libkdcraw @4.7.4_0 |
---|
378 | ---> Cleaning libkdcraw |
---|
379 | ---> Computing dependencies for libkdcraw |
---|
380 | ---> Deactivating libkdcraw @4.7.3_0 |
---|
381 | ---> Cleaning libkdcraw |
---|
382 | ---> Activating libkdcraw @4.7.4_0 |
---|
383 | ########################################################## |
---|
384 | # Don't forget that dbus needs to be started as the local |
---|
385 | # user (not with sudo) before any KDE programs will launch |
---|
386 | # To start it run the following command: |
---|
387 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
388 | ########################################################## |
---|
389 | |
---|
390 | ###################################################### |
---|
391 | # Programs will not start until you run the command |
---|
392 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
393 | # replacing $USER with your username. |
---|
394 | ###################################################### |
---|
395 | ---> Cleaning libkdcraw |
---|
396 | ---> Computing dependencies for libkdeedu |
---|
397 | ---> Fetching archive for libkdeedu |
---|
398 | ---> Attempting to fetch libkdeedu-4.7.4_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkdeedu |
---|
399 | ---> Fetching libkdeedu |
---|
400 | ---> Attempting to fetch libkdeedu-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
401 | ---> Verifying checksum(s) for libkdeedu |
---|
402 | ---> Extracting libkdeedu |
---|
403 | ---> Configuring libkdeedu |
---|
404 | ---> Building libkdeedu |
---|
405 | ---> Staging libkdeedu into destroot |
---|
406 | ---> Installing libkdeedu @4.7.4_1 |
---|
407 | ---> Cleaning libkdeedu |
---|
408 | ---> Computing dependencies for libkdeedu |
---|
409 | ---> Deactivating libkdeedu @4.7.3_0 |
---|
410 | ---> Cleaning libkdeedu |
---|
411 | ---> Activating libkdeedu @4.7.4_1 |
---|
412 | ########################################################## |
---|
413 | # Don't forget that dbus needs to be started as the local |
---|
414 | # user (not with sudo) before any KDE programs will launch |
---|
415 | # To start it run the following command: |
---|
416 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
417 | ########################################################## |
---|
418 | |
---|
419 | ###################################################### |
---|
420 | # Programs will not start until you run the command |
---|
421 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
422 | # replacing $USER with your username. |
---|
423 | ###################################################### |
---|
424 | ---> Cleaning libkdeedu |
---|
425 | ---> Computing dependencies for libkexiv2 |
---|
426 | ---> Fetching archive for libkexiv2 |
---|
427 | ---> Attempting to fetch libkexiv2-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkexiv2 |
---|
428 | ---> Fetching libkexiv2 |
---|
429 | ---> Attempting to fetch libkexiv2-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
430 | ---> Verifying checksum(s) for libkexiv2 |
---|
431 | ---> Extracting libkexiv2 |
---|
432 | ---> Configuring libkexiv2 |
---|
433 | ---> Building libkexiv2 |
---|
434 | ---> Staging libkexiv2 into destroot |
---|
435 | ---> Installing libkexiv2 @4.7.4_0 |
---|
436 | ---> Cleaning libkexiv2 |
---|
437 | ---> Computing dependencies for libkexiv2 |
---|
438 | ---> Deactivating libkexiv2 @4.7.3_0 |
---|
439 | ---> Cleaning libkexiv2 |
---|
440 | ---> Activating libkexiv2 @4.7.4_0 |
---|
441 | ########################################################## |
---|
442 | # Don't forget that dbus needs to be started as the local |
---|
443 | # user (not with sudo) before any KDE programs will launch |
---|
444 | # To start it run the following command: |
---|
445 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
446 | ########################################################## |
---|
447 | |
---|
448 | ###################################################### |
---|
449 | # Programs will not start until you run the command |
---|
450 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
451 | # replacing $USER with your username. |
---|
452 | ###################################################### |
---|
453 | ---> Cleaning libkexiv2 |
---|
454 | ---> Computing dependencies for libkipi |
---|
455 | ---> Fetching archive for libkipi |
---|
456 | ---> Attempting to fetch libkipi-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkipi |
---|
457 | ---> Fetching libkipi |
---|
458 | ---> Attempting to fetch libkipi-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
459 | ---> Verifying checksum(s) for libkipi |
---|
460 | ---> Extracting libkipi |
---|
461 | ---> Configuring libkipi |
---|
462 | ---> Building libkipi |
---|
463 | ---> Staging libkipi into destroot |
---|
464 | ---> Installing libkipi @4.7.4_0 |
---|
465 | ---> Cleaning libkipi |
---|
466 | ---> Computing dependencies for libkipi |
---|
467 | ---> Deactivating libkipi @4.7.3_0 |
---|
468 | ---> Cleaning libkipi |
---|
469 | ---> Activating libkipi @4.7.4_0 |
---|
470 | ########################################################## |
---|
471 | # Don't forget that dbus needs to be started as the local |
---|
472 | # user (not with sudo) before any KDE programs will launch |
---|
473 | # To start it run the following command: |
---|
474 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
475 | ########################################################## |
---|
476 | |
---|
477 | ###################################################### |
---|
478 | # Programs will not start until you run the command |
---|
479 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
480 | # replacing $USER with your username. |
---|
481 | ###################################################### |
---|
482 | ---> Cleaning libkipi |
---|
483 | ---> Computing dependencies for libksane |
---|
484 | ---> Fetching archive for libksane |
---|
485 | ---> Attempting to fetch libksane-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libksane |
---|
486 | ---> Fetching libksane |
---|
487 | ---> Attempting to fetch libksane-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
488 | ---> Verifying checksum(s) for libksane |
---|
489 | ---> Extracting libksane |
---|
490 | ---> Configuring libksane |
---|
491 | ---> Building libksane |
---|
492 | ---> Staging libksane into destroot |
---|
493 | ---> Installing libksane @4.7.4_0 |
---|
494 | ---> Cleaning libksane |
---|
495 | ---> Computing dependencies for libksane |
---|
496 | ---> Deactivating libksane @4.7.3_0 |
---|
497 | ---> Cleaning libksane |
---|
498 | ---> Activating libksane @4.7.4_0 |
---|
499 | ########################################################## |
---|
500 | # Don't forget that dbus needs to be started as the local |
---|
501 | # user (not with sudo) before any KDE programs will launch |
---|
502 | # To start it run the following command: |
---|
503 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
504 | ########################################################## |
---|
505 | |
---|
506 | ###################################################### |
---|
507 | # Programs will not start until you run the command |
---|
508 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
509 | # replacing $USER with your username. |
---|
510 | ###################################################### |
---|
511 | ---> Cleaning libksane |
---|
512 | ---> Fetching archive for libtasn1 |
---|
513 | ---> Attempting to fetch libtasn1-2.11_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libtasn1 |
---|
514 | ---> Fetching libtasn1 |
---|
515 | ---> Attempting to fetch libtasn1-2.11.tar.gz from http://lil.fr.distfiles.macports.org/libtasn1 |
---|
516 | ---> Verifying checksum(s) for libtasn1 |
---|
517 | ---> Extracting libtasn1 |
---|
518 | ---> Configuring libtasn1 |
---|
519 | ---> Building libtasn1 |
---|
520 | ---> Staging libtasn1 into destroot |
---|
521 | ---> Installing libtasn1 @2.11_0 |
---|
522 | ---> Cleaning libtasn1 |
---|
523 | ---> Deactivating libtasn1 @2.9_0 |
---|
524 | ---> Cleaning libtasn1 |
---|
525 | ---> Activating libtasn1 @2.11_0 |
---|
526 | ---> Cleaning libtasn1 |
---|
527 | ---> Computing dependencies for marble |
---|
528 | ---> Fetching archive for marble |
---|
529 | ---> Attempting to fetch marble-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/marble |
---|
530 | ---> Fetching marble |
---|
531 | ---> Attempting to fetch marble-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
532 | ---> Verifying checksum(s) for marble |
---|
533 | ---> Extracting marble |
---|
534 | ---> Applying patches to marble |
---|
535 | ---> Configuring marble |
---|
536 | ---> Building marble |
---|
537 | ---> Staging marble into destroot |
---|
538 | ---> Installing marble @4.7.4_0 |
---|
539 | ---> Cleaning marble |
---|
540 | ---> Computing dependencies for marble |
---|
541 | ---> Deactivating marble @4.7.3_0 |
---|
542 | ---> Cleaning marble |
---|
543 | ---> Activating marble @4.7.4_0 |
---|
544 | ########################################################## |
---|
545 | # Don't forget that dbus needs to be started as the local |
---|
546 | # user (not with sudo) before any KDE programs will launch |
---|
547 | # To start it run the following command: |
---|
548 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
549 | ########################################################## |
---|
550 | |
---|
551 | ###################################################### |
---|
552 | # Programs will not start until you run the command |
---|
553 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
554 | # replacing $USER with your username. |
---|
555 | ###################################################### |
---|
556 | ---> Cleaning marble |
---|
557 | ---> Computing dependencies for oxygen-icons |
---|
558 | ---> Fetching archive for oxygen-icons |
---|
559 | ---> Attempting to fetch oxygen-icons-4.7.4_0.darwin_11.noarch.tbz2 from http://packages.macports.org/oxygen-icons |
---|
560 | ---> Fetching oxygen-icons |
---|
561 | ---> Attempting to fetch oxygen-icons-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/ |
---|
562 | ---> Verifying checksum(s) for oxygen-icons |
---|
563 | ---> Extracting oxygen-icons |
---|
564 | ---> Configuring oxygen-icons |
---|
565 | ---> Building oxygen-icons |
---|
566 | ---> Staging oxygen-icons into destroot |
---|
567 | ---> Installing oxygen-icons @4.7.4_0 |
---|
568 | ---> Cleaning oxygen-icons |
---|
569 | ---> Computing dependencies for oxygen-icons |
---|
570 | ---> Deactivating oxygen-icons @4.7.3_0 |
---|
571 | ---> Cleaning oxygen-icons |
---|
572 | ---> Activating oxygen-icons @4.7.4_0 |
---|
573 | ########################################################## |
---|
574 | # Don't forget that dbus needs to be started as the local |
---|
575 | # user (not with sudo) before any KDE programs will launch |
---|
576 | # To start it run the following command: |
---|
577 | # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist |
---|
578 | ########################################################## |
---|
579 | |
---|
580 | ###################################################### |
---|
581 | # Programs will not start until you run the command |
---|
582 | # 'sudo chown -R $USER ~/Library/Preferences/KDE' |
---|
583 | # replacing $USER with your username. |
---|
584 | ###################################################### |
---|
585 | ---> Cleaning oxygen-icons |
---|
586 | ---> Computing dependencies for py27-nose |
---|
587 | ---> Fetching archive for py27-nose |
---|
588 | ---> Attempting to fetch py27-nose-1.1.2_1.darwin_11.noarch.tbz2 from http://packages.macports.org/py27-nose |
---|
589 | ---> Fetching py27-nose |
---|
590 | ---> Verifying checksum(s) for py27-nose |
---|
591 | ---> Extracting py27-nose |
---|
592 | ---> Configuring py27-nose |
---|
593 | ---> Building py27-nose |
---|
594 | ---> Staging py27-nose into destroot |
---|
595 | ---> Installing py27-nose @1.1.2_1 |
---|
596 | ---> Cleaning py27-nose |
---|
597 | ---> Computing dependencies for py27-nose |
---|
598 | ---> Deactivating py27-nose @1.1.2_0 |
---|
599 | ---> Cleaning py27-nose |
---|
600 | ---> Activating py27-nose @1.1.2_1 |
---|
601 | ---> Cleaning py27-nose |
---|
602 | ---> Fetching archive for xorg-util-macros |
---|
603 | ---> Attempting to fetch xorg-util-macros-1.16.0_0.darwin_11.noarch.tbz2 from http://packages.macports.org/xorg-util-macros |
---|
604 | ---> Fetching xorg-util-macros |
---|
605 | ---> Attempting to fetch util-macros-1.16.0.tar.bz2 from http://lil.fr.distfiles.macports.org/xorg-util-macros |
---|
606 | ---> Verifying checksum(s) for xorg-util-macros |
---|
607 | ---> Extracting xorg-util-macros |
---|
608 | ---> Configuring xorg-util-macros |
---|
609 | ---> Building xorg-util-macros |
---|
610 | ---> Staging xorg-util-macros into destroot |
---|
611 | ---> Installing xorg-util-macros @1.16.0_0 |
---|
612 | ---> Cleaning xorg-util-macros |
---|
613 | ---> Deactivating xorg-util-macros @1.15.0_0 |
---|
614 | ---> Cleaning xorg-util-macros |
---|
615 | ---> Activating xorg-util-macros @1.16.0_0 |
---|
616 | ---> Cleaning xorg-util-macros |
---|
617 | $ |
---|