Ticket #32768: main.log

File main.log, 78.0 KB (added by anfojp@…, 13 years ago)
Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main libevent 2.0.16_0 exists in the ports tree
4:debug:main libevent 2.0.16_0  is the latest installed
5:debug:main libevent 2.0.16_0  is active
6:debug:main Merging existing variants '' into variants
7:debug:main new fully merged portvariants:
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libevent
9:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
12:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
13:debug:main adding the default universal variant
14:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
15:debug:main No need to upgrade! libevent 2.0.16_0 >= libevent 2.0.16_0
16:debug:main epoch: in tree: 1 installed: 1
17:debug:main autoconf 2.68_2 exists in the ports tree
18:debug:main autoconf 2.68_2  is the latest installed
19:debug:main autoconf 2.68_2  is active
20:debug:main Merging existing variants '' into variants
21:debug:main new fully merged portvariants:
22:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
23:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
24:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
25:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
26:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
27:debug:main only one arch supported, so not adding the default universal variant
28:debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
29:debug:main epoch: in tree: 0 installed: 0
30:debug:main perl5 5.12.3_1 exists in the ports tree
31:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
32:debug:main perl5 5.12.3_1 +perl5_12 is active
33:debug:main Merging existing variants '+perl5_12' into variants
34:debug:main new fully merged portvariants: perl5_12 +
35:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
36:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
37:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
38:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
39:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
40:debug:main universal_variant is false, so not adding the default universal variant
41:debug:main Executing variant perl5_12 provides perl5_12
42:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
43:debug:main epoch: in tree: 0 installed: 0
44:debug:main perl5.12 5.12.3_3 exists in the ports tree
45:debug:main perl5.12 5.12.3_3  is the latest installed
46:debug:main perl5.12 5.12.3_3  is active
47:debug:main Merging existing variants '' into variants
48:debug:main new fully merged portvariants:
49:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
50:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
51:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
52:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
53:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
54:debug:main adding the default universal variant
55:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
56:debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
57:debug:main epoch: in tree: 0 installed: 0
58:debug:main gdbm 1.10_1 exists in the ports tree
59:debug:main gdbm 1.10_1  is the latest installed
60:debug:main gdbm 1.10_1  is active
61:debug:main Merging existing variants '' into variants
62:debug:main new fully merged portvariants:
63:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
64:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
65:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
66:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
67:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
68:debug:main adding the default universal variant
69:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
70:debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
71:debug:main epoch: in tree: 0 installed: 0
72:debug:main gettext 0.18.1.1_2 exists in the ports tree
73:debug:main gettext 0.18.1.1_2  is the latest installed
74:debug:main gettext 0.18.1.1_2  is active
75:debug:main Merging existing variants '' into variants
76:debug:main new fully merged portvariants:
77:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
78:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
79:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
80:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
81:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
82:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
83:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
84:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
85:debug:main universal variant already exists, so not adding the default one
86:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
87:debug:main epoch: in tree: 0 installed: 0
88:debug:main libiconv 1.14_0 exists in the ports tree
89:debug:main libiconv 1.14_0  is the latest installed
90:debug:main libiconv 1.14_0  is active
91:debug:main Merging existing variants '' into variants
92:debug:main new fully merged portvariants:
93:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
94:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
95:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
96:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
97:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
98:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
99:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
100:debug:main universal variant already exists, so not adding the default one
101:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
102:debug:main epoch: in tree: 0 installed: 0
103:debug:main ncurses 5.9_1 exists in the ports tree
104:debug:main ncurses 5.9_1  is the latest installed
105:debug:main ncurses 5.9_1  is active
106:debug:main Merging existing variants '' into variants
107:debug:main new fully merged portvariants:
108:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
109:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
110:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
111:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
112:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
113:debug:main adding the default universal variant
114:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
115:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
116:debug:main epoch: in tree: 0 installed: 0
117:debug:main expat 2.0.1_1 exists in the ports tree
118:debug:main expat 2.0.1_1  is the latest installed
119:debug:main expat 2.0.1_1  is active
120:debug:main Merging existing variants '' into variants
121:debug:main new fully merged portvariants:
122:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
123:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
124:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
125:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
126:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
127:debug:main adding the default universal variant
128:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
129:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
130:debug:main epoch: in tree: 0 installed: 0
131:debug:main m4 1.4.16_0 exists in the ports tree
132:debug:main m4 1.4.16_0  is the latest installed
133:debug:main m4 1.4.16_0  is active
134:debug:main Merging existing variants '' into variants
135:debug:main new fully merged portvariants:
136:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
137:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
138:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
139:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
140:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
141:debug:main adding the default universal variant
142:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
143:debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
144:debug:main epoch: in tree: 0 installed: 0
145:debug:main help2man 1.40.4_1 exists in the ports tree
146:debug:main help2man 1.40.4_1  is the latest installed
147:debug:main help2man 1.40.4_1  is active
148:debug:main Merging existing variants '' into variants
149:debug:main new fully merged portvariants:
150:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
151:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
152:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
153:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
154:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
155:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
156:debug:main universal variant already exists, so not adding the default one
157:debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
158:debug:main epoch: in tree: 0 installed: 0
159:debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
160:debug:main p5.12-locale-gettext 1.50.0_6  is the latest installed
161:debug:main p5.12-locale-gettext 1.50.0_6  is active
162:debug:main Merging existing variants '' into variants
163:debug:main new fully merged portvariants:
164:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
165:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
166:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
167:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
168:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
169:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
170:debug:main Re-registering default for livecheck.version
171:debug:main Re-registering default for configure.universal_args
172:debug:main adding the default universal variant
173:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
174:debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12-locale-gettext 1.50.0_6
175:debug:main epoch: in tree: 0 installed: 0
176:debug:main automake 1.11.2_0 exists in the ports tree
177:debug:main automake 1.11.2_0  is the latest installed
178:debug:main automake 1.11.2_0  is active
179:debug:main Merging existing variants '' into variants
180:debug:main new fully merged portvariants:
181:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
182:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
183:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
184:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
185:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
186:debug:main only one arch supported, so not adding the default universal variant
187:debug:main No need to upgrade! automake 1.11.2_0 >= automake 1.11.2_0
188:debug:main epoch: in tree: 0 installed: 0
189:debug:main libtool 2.4.2_0 exists in the ports tree
190:debug:main libtool 2.4.2_0  is the latest installed
191:debug:main libtool 2.4.2_0  is active
192:debug:main Merging existing variants '' into variants
193:debug:main new fully merged portvariants:
194:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
195:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
196:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
197:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
198:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
199:debug:main adding the default universal variant
200:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
201:debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
202:debug:main epoch: in tree: 0 installed: 0
203:debug:main libpng 1.4.8_0 exists in the ports tree
204:debug:main libpng 1.4.8_0  is the latest installed
205:debug:main libpng 1.4.8_0  is active
206:debug:main Merging existing variants '' into variants
207:debug:main new fully merged portvariants:
208:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
209:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
210:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
211:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
212:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
213:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
214:debug:main adding the default universal variant
215:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
216:debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0
217:debug:main epoch: in tree: 0 installed: 0
218:debug:main zlib 1.2.5_0 exists in the ports tree
219:debug:main zlib 1.2.5_0  is the latest installed
220:debug:main zlib 1.2.5_0  is active
221:debug:main Merging existing variants '' into variants
222:debug:main new fully merged portvariants:
223:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
224:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
225:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
226:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
227:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
228:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
229:debug:main adding the default universal variant
230:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
231:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
232:msg:main --->  Computing dependencies for ntop:info:main .:debug:main Searching for dependency: gawk
233:debug:main Didn't find receipt, going to depspec regex for: gawk
234:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
235:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
236:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
237:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
238:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
239:debug:main adding the default universal variant
240:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
241:debug:main Searching for dependency: wget
242:debug:main Didn't find receipt, going to depspec regex for: wget
243:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/wget
244:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
245:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
246:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
247:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
248:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
249:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
250:debug:main universal variant already exists, so not adding the default one
251:debug:main Executing variant ssl provides ssl
252:debug:main Searching for dependency: rrdtool
253:debug:main Didn't find receipt, going to depspec regex for: rrdtool
254:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rrdtool
255:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
256:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
257:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
258:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
259:debug:main adding the default universal variant
260:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
261:debug:main Searching for dependency: libevent
262:debug:main Found Dependency: receipt exists for libevent
263:debug:main Searching for dependency: autoconf
264:debug:main Found Dependency: receipt exists for autoconf
265:debug:main Searching for dependency: automake
266:debug:main Found Dependency: receipt exists for automake
267:debug:main Searching for dependency: libtool
268:debug:main Found Dependency: receipt exists for libtool
269:debug:main Searching for dependency: libpcap
270:debug:main Didn't find receipt, going to depspec regex for: libpcap
271:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
272:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
273:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
274:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
275:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
276:debug:main adding the default universal variant
277:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
278:debug:main Searching for dependency: gd2
279:debug:main Didn't find receipt, going to depspec regex for: gd2
280:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
281:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
282:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
283:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
284:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
285:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
286:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
287:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
288:debug:main universal variant already exists, so not adding the default one
289:debug:main Searching for dependency: libpng
290:debug:main Found Dependency: receipt exists for libpng
291:debug:main Searching for dependency: gdbm
292:debug:main Found Dependency: receipt exists for gdbm
293:debug:main Searching for dependency: libgeoip
294:debug:main Didn't find receipt, going to depspec regex for: libgeoip
295:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgeoip
296:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
297:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
298:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
299:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
300:debug:main adding the default universal variant
301:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
302:info:main .:debug:main Searching for dependency: readline
303:debug:main Found Dependency: receipt exists for readline
304:debug:main Searching for dependency: gettext
305:debug:main Found Dependency: receipt exists for gettext
306:info:main .:debug:main Searching for dependency: texinfo
307:debug:main Found Dependency: receipt exists for texinfo
308:debug:main Searching for dependency: perl5
309:debug:main Found Dependency: receipt exists for perl5
310:debug:main Searching for dependency: pkgconfig
311:debug:main Found Dependency: receipt exists for pkgconfig
312:debug:main Searching for dependency: libidn
313:debug:main Found Dependency: receipt exists for libidn
314:debug:main Searching for dependency: gnutls
315:debug:main Found Dependency: receipt exists for gnutls
316:info:main .:debug:main Searching for dependency: expat
317:debug:main Found Dependency: receipt exists for expat
318:debug:main Searching for dependency: glib2
319:debug:main Found Dependency: receipt exists for glib2
320:debug:main Searching for dependency: libiconv
321:debug:main Found Dependency: receipt exists for libiconv
322:debug:main Searching for dependency: pango
323:debug:main Found Dependency: receipt exists for pango
324:debug:main Searching for dependency: perl5
325:debug:main Found Dependency: receipt exists for perl5
326:debug:main Searching for dependency: tcl
327:debug:main Didn't find receipt, going to depspec regex for: tcl
328:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
329:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
330:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
331:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
332:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
333:debug:main adding the default universal variant
334:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
335:debug:main Searching for dependency: zlib
336:debug:main Found Dependency: receipt exists for zlib
337:debug:main Searching for dependency: libxml2
338:debug:main Found Dependency: receipt exists for libxml2
339:debug:main Searching for dependency: intltool
340:debug:main Found Dependency: receipt exists for intltool
341:info:main .:info:main .:info:main .:debug:main Searching for dependency: jpeg
342:debug:main Found Dependency: receipt exists for jpeg
343:debug:main Searching for dependency: freetype
344:debug:main Found Dependency: receipt exists for freetype
345:debug:main Searching for dependency: fontconfig
346:debug:main Found Dependency: receipt exists for fontconfig
347:debug:main Searching for dependency: xpm
348:debug:main Didn't find receipt, going to depspec regex for: xpm
349:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
350:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
351:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
352:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
353:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
354:debug:main adding the default universal variant
355:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
356:info:main .:debug:main Searching for dependency: xorg-xproto
357:debug:main Found Dependency: receipt exists for xorg-xproto
358:debug:main Searching for dependency: xorg-libXt
359:debug:main Found Dependency: receipt exists for xorg-libXt
360:debug:main Searching for dependency: xorg-libXext
361:debug:main Found Dependency: receipt exists for xorg-libXext
362:info:main .:msg:main
363:msg:main --->  Dependencies to be installed: gawk gd2 xpm libgeoip libpcap rrdtool tcl wget
364:debug:main Starting logging for gawk
365:debug:clean Starting logging for xpm
366:debug:clean Starting logging for gd2
367:debug:clean Starting logging for libgeoip
368:debug:clean Starting logging for libpcap
369:debug:clean Starting logging for tcl
370:debug:clean Starting logging for rrdtool
371:debug:clean Starting logging for wget
372:debug:main Executing org.macports.main (ntop)
373:debug:main changing euid/egid - current euid: 0 - current egid: 0
374:debug:main egid changed to: 502
375:debug:main euid changed to: 505
376:debug:archivefetch archivefetch phase started at Thu Jan  5 12:11:53 JST 2012
377:msg:archivefetch --->  Fetching archive for ntop
378:debug:archivefetch Executing org.macports.archivefetch (ntop)
379:debug:archivefetch Can't run archivefetch on this port without elevated privileges. Escalating privileges back to root.
380:debug:archivefetch euid changed to: 0. egid changed to: 0.
381:debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0
382:debug:archivefetch egid changed to: 502
383:debug:archivefetch euid changed to: 505
384:info:archivefetch --->  ntop-3.3.10_5.darwin_10.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/ntop
385:msg:archivefetch --->  Attempting to fetch ntop-3.3.10_5.darwin_10.x86_64.tbz2 from http://packages.macports.org/ntop
386:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
387:debug:archivefetch Privilege de-escalation not attempted as not running as root.
388:debug:fetch fetch phase started at Thu Jan  5 12:11:53 JST 2012
389:notice:fetch --->  Fetching ntop
390:debug:fetch Can't run fetch on this port without elevated privileges. Escalating privileges back to root.
391:debug:fetch euid changed to: 0. egid changed to: 0.
392:debug:fetch changing euid/egid - current euid: 0 - current egid: 0
393:debug:fetch egid changed to: 502
394:debug:fetch euid changed to: 505
395:debug:fetch Executing org.macports.fetch (ntop)
396:info:fetch --->  ntop-3.3.10.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/ntop
397:debug:fetch Pinging downloads.sourceforge.net...
398:debug:fetch Pinging aarnet.dl.sourceforge.net...
399:debug:fetch Pinging biznetnetworks.dl.sourceforge.net...
400:debug:fetch Pinging cdnetworks-us-1.dl.sourceforge.net...
401:debug:fetch Pinging cdnetworks-us-2.dl.sourceforge.net...
402:debug:fetch Pinging cdnetworks-kr-1.dl.sourceforge.net...
403:debug:fetch Pinging cdnetworks-kr-2.dl.sourceforge.net...
404:debug:fetch Pinging citylan.dl.sourceforge.net...
405:debug:fetch Pinging dfn.dl.sourceforge.net...
406:debug:fetch Pinging fastbull.dl.sourceforge.net...
407:debug:fetch Pinging freefr.dl.sourceforge.net...
408:debug:fetch Pinging garr.dl.sourceforge.net...
409:debug:fetch Pinging heanet.dl.sourceforge.net...
410:debug:fetch Pinging hivelocity.dl.sourceforge.net...
411:debug:fetch Pinging ignum.dl.sourceforge.net...
412:debug:fetch Pinging internode.dl.sourceforge.net...
413:debug:fetch Pinging iweb.dl.sourceforge.net...
414:debug:fetch Pinging jaist.dl.sourceforge.net...
415:debug:fetch Pinging kent.dl.sourceforge.net...
416:debug:fetch Pinging mesh.dl.sourceforge.net...
417:debug:fetch Pinging nchc.dl.sourceforge.net...
418:debug:fetch Pinging ncu.dl.sourceforge.net...
419:debug:fetch Pinging netcologne.dl.sourceforge.net...
420:debug:fetch Pinging puzzle.dl.sourceforge.net...
421:debug:fetch Pinging softlayer.dl.sourceforge.net...
422:debug:fetch Pinging space.dl.sourceforge.net...
423:debug:fetch Pinging sunet.dl.sourceforge.net...
424:debug:fetch Pinging surfnet.dl.sourceforge.net...
425:debug:fetch Pinging switch.dl.sourceforge.net...
426:debug:fetch Pinging transact.dl.sourceforge.net...
427:debug:fetch Pinging ufpr.dl.sourceforge.net...
428:debug:fetch Pinging voxel.dl.sourceforge.net...
429:debug:fetch Pinging waix.dl.sourceforge.net...
430:debug:fetch Pinging distfiles.macports.org...
431:debug:fetch Pinging aarnet.au.distfiles.macports.org...
432:debug:fetch Pinging her.gr.distfiles.macports.org...
433:debug:fetch Pinging jog.id.distfiles.macports.org...
434:debug:fetch Pinging lil.fr.distfiles.macports.org...
435:debug:fetch Pinging sea.us.distfiles.macports.org...
436:debug:fetch Pinging ykf.ca.distfiles.macports.org...
437:debug:fetch downloads.sourceforge.net ping time is 177.235
438:debug:fetch aarnet.dl.sourceforge.net ping time is 323.167
439:debug:fetch biznetnetworks.dl.sourceforge.net ping time is 124.251
440:debug:fetch cdnetworks-us-1.dl.sourceforge.net ping time is 156.548
441:debug:fetch cdnetworks-us-2.dl.sourceforge.net ping time is 153.061
442:debug:fetch cdnetworks-kr-1.dl.sourceforge.net ping time is 71.562
443:debug:fetch cdnetworks-kr-2.dl.sourceforge.net ping time is 75.122
444:debug:fetch citylan.dl.sourceforge.net ping time is 319.386
445:debug:fetch dfn.dl.sourceforge.net ping time is 296.413
446:debug:fetch fastbull.dl.sourceforge.net ping time is 305.353
447:debug:fetch freefr.dl.sourceforge.net ping time is 283.765
448:debug:fetch garr.dl.sourceforge.net ping time is 289.900
449:debug:fetch heanet.dl.sourceforge.net ping time is 297.861
450:debug:fetch hivelocity.dl.sourceforge.net ping time is 203.171
451:debug:fetch ignum.dl.sourceforge.net ping time is 311.838
452:debug:fetch internode.dl.sourceforge.net ping time is 287.285
453:debug:fetch iweb.dl.sourceforge.net ping time is 215.624
454:debug:fetch jaist.dl.sourceforge.net ping time is 56.043
455:debug:fetch kent.dl.sourceforge.net ping time is 270.223
456:debug:fetch mesh.dl.sourceforge.net ping time is 288.895
457:debug:fetch nchc.dl.sourceforge.net ping time is 68.106
458:debug:fetch ncu.dl.sourceforge.net ping time is 10000
459:debug:fetch netcologne.dl.sourceforge.net ping time is 10000
460:debug:fetch puzzle.dl.sourceforge.net ping time is 270.460
461:debug:fetch softlayer.dl.sourceforge.net ping time is 175.226
462:debug:fetch space.dl.sourceforge.net ping time is 427.125
463:debug:fetch sunet.dl.sourceforge.net ping time is 303.011
464:debug:fetch surfnet.dl.sourceforge.net ping time is 270.697
465:debug:fetch switch.dl.sourceforge.net ping time is 258.306
466:debug:fetch transact.dl.sourceforge.net ping time is 274.263
467:debug:fetch ufpr.dl.sourceforge.net ping time is 298.331
468:debug:fetch voxel.dl.sourceforge.net ping time is 116.466
469:debug:fetch waix.dl.sourceforge.net ping time is 327.959
470:debug:fetch distfiles.macports.org ping time is 152.150
471:debug:fetch aarnet.au.distfiles.macports.org ping time is 217.484
472:debug:fetch her.gr.distfiles.macports.org ping time is 319.450
473:debug:fetch jog.id.distfiles.macports.org ping time is 184.146
474:debug:fetch lil.fr.distfiles.macports.org ping time is 257.124
475:debug:fetch sea.us.distfiles.macports.org ping time is 10000
476:debug:fetch ykf.ca.distfiles.macports.org ping time is 187.266
477:notice:fetch --->  Attempting to fetch ntop-3.3.10.tar.gz from http://jaist.dl.sourceforge.net/ntop
478:debug:fetch Privilege de-escalation not attempted as not running as root.
479:debug:checksum checksum phase started at Thu Jan  5 12:13:20 JST 2012
480:notice:checksum --->  Verifying checksum(s) for ntop
481:debug:checksum Executing org.macports.checksum (ntop)
482:info:checksum --->  Checksumming ntop-3.3.10.tar.gz
483:debug:checksum Correct (md5) checksum for ntop-3.3.10.tar.gz
484:debug:checksum Privilege de-escalation not attempted as not running as root.
485:debug:extract extract phase started at Thu Jan  5 12:13:20 JST 2012
486:notice:extract --->  Extracting ntop
487:debug:extract Executing org.macports.extract (ntop)
488:info:extract --->  Extracting ntop-3.3.10.tar.gz
489:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz'
490:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
491:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
492:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -
493:debug:extract euid/egid changed to: 0/0
494:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work to macports
495:debug:extract euid/egid changed to: 505/502
496:debug:extract Privilege de-escalation not attempted as not running as root.
497:debug:patch patch phase started at Thu Jan  5 12:13:21 JST 2012
498:debug:patch Executing org.macports.patch (ntop)
499:notice:patch --->  Applying patches to ntop
500:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files/patch-external-geoip.diff
501:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
502:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && /usr/bin/patch -p0'
503:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files/patch-external-geoip.diff'
504:info:patch patching file configure.in
505:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files/patch-Makefile.am.diff
506:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
507:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && /usr/bin/patch -p0'
508:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files/patch-Makefile.am.diff'
509:info:patch patching file Makefile.am
510:debug:patch Privilege de-escalation not attempted as not running as root.
511:debug:configure configure phase started at Thu Jan  5 12:13:21 JST 2012
512:notice:configure --->  Configuring ntop
513:debug:configure Using compiler 'Mac OS X clang'
514:debug:configure Executing proc-pre-org.macports.configure-configure-0
515:info:configure
516:info:configure Starting ntop automatic configuration system v.0.2.3
517:info:configure
518:info:configure   Please be patient, there is a lot to do...
519:info:configure
520:info:configure ....Adding fix for OSX
521:info:configure 1. Testing gnu tools....
522:info:configure     libtool ..... 2.4.2
523:info:configure         .... ok
524:info:configure     automake .... 1.11.2
525:info:configure         .... ok
526:info:configure     autoconf .... 2.68
527:info:configure         .... ok
528:info:configure
529:info:configure 2. Preparing for libtool ....
530:info:configure glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'.
531:info:configure glibtoolize: copying file `./ltmain.sh'
532:info:configure glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
533:info:configure glibtoolize: copying file `m4/libtool.m4'
534:info:configure glibtoolize: copying file `m4/ltoptions.m4'
535:info:configure glibtoolize: copying file `m4/ltsugar.m4'
536:info:configure glibtoolize: copying file `m4/ltversion.m4'
537:info:configure glibtoolize: copying file `m4/lt~obsolete.m4'
538:info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
539:info:configure     Finding libtool.m4.in
540:info:configure         .... found /usr/share/aclocal/libtool.m4
541:info:configure         .... done
542:info:configure
543:info:configure 3. Create acinclude.m4, local definitions for automake ...
544:info:configure         .... done
545:info:configure
546:info:configure 4. Running aclocal to create aclocal.m4 ...
547:info:configure acinclude.m4:238: the serial number must appear before any macro definition
548:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
549:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
550:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
551:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
552:info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded from...
553:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
554:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
555:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
556:info:configure acinclude.m4:265: LT_INIT is expanded from...
557:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
558:info:configure configure.in:169: the top level
559:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
560:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
561:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
562:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
563:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
564:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
565:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
566:info:configure acinclude.m4:265: LT_INIT is expanded from...
567:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
568:info:configure configure.in:169: the top level
569:info:configure         .... done
570:info:configure
571:info:configure 5. Running autoheader to create config.h.in ...
572:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
573:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
574:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
575:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
576:info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded from...
577:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
578:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
579:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
580:info:configure acinclude.m4:265: LT_INIT is expanded from...
581:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
582:info:configure configure.in:169: the top level
583:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
584:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
585:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
586:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
587:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
588:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
589:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
590:info:configure acinclude.m4:265: LT_INIT is expanded from...
591:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
592:info:configure configure.in:169: the top level
593:info:configure         .... done
594:info:configure
595:info:configure 6. Running automake to create Makefile.in ...
596:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
597:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
598:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
599:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
600:info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded from...
601:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
602:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
603:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
604:info:configure acinclude.m4:265: LT_INIT is expanded from...
605:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
606:info:configure configure.in:169: the top level
607:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
608:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
609:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
610:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
611:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
612:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
613:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
614:info:configure acinclude.m4:265: LT_INIT is expanded from...
615:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
616:info:configure configure.in:169: the top level
617:info:configure configure.in:105: installing `./config.guess'
618:info:configure Makefile.am:119: compiling `main.c' with per-target flags requires `AM_PROG_CC_C_O' in `configure.in'
619:info:configure         .... done
620:info:configure
621:info:configure 7. Running autoconf to create configure ...
622:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
623:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
624:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
625:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
626:info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded from...
627:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
628:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
629:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
630:info:configure acinclude.m4:265: LT_INIT is expanded from...
631:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
632:info:configure configure.in:169: the top level
633:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
634:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
635:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
636:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
637:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
638:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
639:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
640:info:configure acinclude.m4:265: LT_INIT is expanded from...
641:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
642:info:configure configure.in:169: the top level
643:info:configure         .... done
644:info:configure
645:info:configure 8. Skipping ./configure
646:info:configure Run ./configure and then make to compile ntop
647:info:configure
648:debug:configure Executing org.macports.configure (ntop)
649:debug:configure Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
650:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && autoconf'
651:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && autoconf
652:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
653:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
654:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
655:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
656:info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded from...
657:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
658:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
659:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
660:info:configure acinclude.m4:265: LT_INIT is expanded from...
661:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
662:info:configure configure.in:169: the top level
663:info:configure configure.in:169: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
664:info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
665:info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
666:info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
667:info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
668:info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
669:info:configure acinclude.m4:339: _LT_SETUP is expanded from...
670:info:configure acinclude.m4:265: LT_INIT is expanded from...
671:info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
672:info:configure configure.in:169: the top level
673:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -I/opt/local/include -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/Developer/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/Developer/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/clang'
674:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl'
675:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl
676:info:configure configure: WARNING: unrecognized options: --with-localedir
677:info:configure
678:info:configure Welcome to ntop, Version 3.3.10
679:info:configure   copyright (c) 1998-2009 Luca Deri <deri@ntop.org>
680:info:configure
681:info:configure Configuration script version v3.3.10-06-01-2009
682:info:configure
683:info:configure ************************************************************************
684:info:configure *                                                                      *
685:info:configure * NOTICE:  I know you're used to ignoring output from ./configure      *
686:info:configure *                                                                      *
687:info:configure *          ntop has a lot of complexity and interdependences.          *
688:info:configure *                                                                      *
689:info:configure *          Please, please AT LEAST read the stuff in these boxes!      *
690:info:configure *                                                                      *
691:info:configure *>>> The ACTION taken by ./configure is shown prefixed with '>>>'      *
692:info:configure *                                                                      *
693:info:configure *    If that ACTION is unacceptable,                                   *
694:info:configure *??? Steps to take to fix the problem are shown, prefixed with '???'   *
695:info:configure *                                                                      *
696:info:configure ************************************************************************
697:info:configure
698:info:configure NOTE:
699:info:configure
700:info:configure        To enable additional, debugging messages during the ./configure
701:info:configure        execution, do this before running ./configure:
702:info:configure
703:info:configure $ export NTOPCONFIGDEBUG=yes
704:info:configure
705:info:configure
706:info:configure Configuring ntop according to your request(s):
707:info:configure    ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl
708:info:configure
709:info:configure checking build system type... x86_64-apple-darwin10.8.0
710:info:configure checking host system type... x86_64-apple-darwin10.8.0
711:info:configure checking target system type... x86_64-apple-darwin10.8.0
712:info:configure checking for a BSD-compatible install... /usr/bin/install -c
713:info:configure checking whether build environment is sane... yes
714:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
715:info:configure checking for gawk... gawk
716:info:configure checking whether make sets $(MAKE)... yes
717:info:configure checking for style of include used by make... GNU
718:info:configure checking for gcc... /Developer/usr/bin/clang
719:info:configure checking whether the C compiler works... yes
720:info:configure checking for C compiler default output file name... a.out
721:info:configure checking for suffix of executables...
722:info:configure checking whether we are cross compiling... no
723:info:configure checking for suffix of object files... o
724:info:configure checking whether we are using the GNU C compiler... yes
725:info:configure checking whether /Developer/usr/bin/clang accepts -g... yes
726:info:configure checking for /Developer/usr/bin/clang option to accept ISO C89... none needed
727:info:configure checking dependency style of /Developer/usr/bin/clang... gcc3
728:info:configure checking how to run the C preprocessor... /Developer/usr/bin/clang -E
729:info:configure checking for gcc... (cached) /Developer/usr/bin/clang
730:info:configure checking whether we are using the GNU C compiler... (cached) yes
731:info:configure checking whether /Developer/usr/bin/clang accepts -g... (cached) yes
732:info:configure checking for /Developer/usr/bin/clang option to accept ISO C89... (cached) none needed
733:info:configure checking dependency style of /Developer/usr/bin/clang... (cached) gcc3
734:info:configure checking whether ln -s works... yes
735:info:configure checking whether make sets $(MAKE)... (cached) yes
736:info:configure checking how to print strings... printf
737:info:configure checking for a sed that does not truncate output... /usr/bin/sed
738:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
739:info:configure checking for egrep... /usr/bin/grep -E
740:info:configure checking for fgrep... /usr/bin/grep -F
741:info:configure checking for ld used by /Developer/usr/bin/clang... /Developer/usr/bin/ld
742:info:configure checking if the linker (/Developer/usr/bin/ld) is GNU ld... no
743:info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
744:info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
745:info:configure checking the maximum length of command line arguments... 196608
746:info:configure checking whether the shell understands some XSI constructs... yes
747:info:configure checking whether the shell understands "+="... yes
748:info:configure checking for /Developer/usr/bin/ld option to reload object files... -r
749:info:configure checking for objdump... no
750:info:configure checking how to recognize dependent libraries... pass_all
751:info:configure checking for ar... ar
752:info:configure checking for strip... strip
753:info:configure checking for ranlib... ranlib
754:info:configure checking command to parse /usr/bin/nm output from /Developer/usr/bin/clang object... ok
755:info:configure checking for dsymutil... dsymutil
756:info:configure checking for nmedit... nmedit
757:info:configure checking for lipo... lipo
758:info:configure checking for otool... otool
759:info:configure checking for otool64... otool64
760:info:configure checking for -single_module linker flag... yes
761:info:configure checking for -exported_symbols_list linker flag... yes
762:info:configure checking for -force_load linker flag... yes
763:info:configure checking for ANSI C header files... yes
764:info:configure checking for sys/types.h... yes
765:info:configure checking for sys/stat.h... yes
766:info:configure checking for stdlib.h... yes
767:info:configure checking for string.h... yes
768:info:configure checking for memory.h... yes
769:info:configure checking for strings.h... yes
770:info:configure checking for inttypes.h... yes
771:info:configure checking for stdint.h... yes
772:info:configure checking for unistd.h... yes
773:info:configure checking for dlfcn.h... yes
774:info:configure checking for objdir... .libs
775:info:configure checking if /Developer/usr/bin/clang supports -fno-rtti -fno-exceptions... yes
776:info:configure checking for /Developer/usr/bin/clang option to produce PIC... -fno-common -DPIC
777:info:configure checking if /Developer/usr/bin/clang PIC flag -fno-common -DPIC works... yes
778:info:configure checking if /Developer/usr/bin/clang static flag -static works... no
779:info:configure checking if /Developer/usr/bin/clang supports -c -o file.o... yes
780:info:configure checking if /Developer/usr/bin/clang supports -c -o file.o... (cached) yes
781:info:configure checking whether the /Developer/usr/bin/clang linker (/Developer/usr/bin/ld) supports shared libraries... yes
782:info:configure checking dynamic linker characteristics... darwin10.8.0 dyld
783:info:configure checking how to hardcode library paths into programs... immediate
784:info:configure checking whether stripping libraries is possible... yes
785:info:configure checking if libtool supports shared libraries... yes
786:info:configure checking whether to build shared libraries... yes
787:info:configure checking whether to build static libraries... yes
788:info:configure checking for aclocal.m4... yes
789:info:configure checking for depcomp... yes
790:info:configure checking for library containing gethostbyname... none required
791:info:configure checking for library containing socket... none required
792:info:configure
793:info:configure Checking C compiler program and features...
794:info:configure
795:info:configure checking for gcc... (cached) /Developer/usr/bin/clang
796:info:configure checking whether we are using the GNU C compiler... (cached) yes
797:info:configure checking whether /Developer/usr/bin/clang accepts -g... (cached) yes
798:info:configure checking for /Developer/usr/bin/clang option to accept ISO C89... (cached) none needed
799:info:configure checking dependency style of /Developer/usr/bin/clang... (cached) gcc3
800:info:configure
801:info:configure *******************************************************************
802:info:configure *
803:info:configure * Checking for unique options for x86_64-apple-darwin10.8.0, /Developer/usr/bin/clang...
804:info:configure *
805:info:configure * This appears to be DARWIN (MacOSX)
806:info:configure *
807:info:configure *   Testing for extra configuration options for DARWIN 
808:info:configure *
809:info:configure *    Executing configureextra/DARWIN
810:info:configure         Setting Darwin (Mac OS X) specific flag values
811:info:configure *
812:info:configure *******************************************************************
813:info:configure
814:info:configure Test the compiler and setup CFLAGS...
815:info:configure
816:info:configure checking if compiler accepts -g (debugging information)... yes
817:info:configure checking if compiler accepts -W (warning flags)... yes
818:info:configure
819:info:configure Critical library/include tests...
820:info:configure
821:info:configure found in standard OSX installation
822:info:configure checking for pcap_next_ex in -lpcap... yes
823:info:configure checking for gdbm...
824:info:configure checking gdbm.h usability... yes
825:info:configure checking gdbm.h presence... yes
826:info:configure checking for gdbm.h... yes
827:info:configure checking for gdbm_open in -lgdbm... yes
828:info:configure checking for pcre_refcount in -lpcre... yes
829:info:configure
830:info:configure -------------------------------------------------------------------
831:info:configure
832:info:configure    **Handling your --enable and --disable requests**
833:info:configure
834:info:configure
835:info:configure SSL?
836:info:configure     ...Disabled via ./configure command line option --without-ssl
837:info:configure
838:info:configure TCP Wrappers?
839:info:configure     ...(Default) Disabled. Request via ./configure command line option --with-tcpwrap.
840:info:configure
841:info:configure Plugins?
842:info:configure     ...(Default) Requested. Disable via ./configure command line option --disable-plugins.
843:info:configure
844:info:configure Jumbo (9k) Ethernet Frames?
845:info:configure     ...(Default) Disabled. Request via ./configure command line option --enable-jumbo-frames.
846:info:configure
847:info:configure Processing the rest of the ROOT/DIRECTORY entries
848:info:configure
849:info:configure
850:info:configure *******************************************************************
851:info:configure *
852:info:configure * WARNING:  You specified a non-existent directory for locale files
853:info:configure *                  --with-localedir=/usr/lib/locale
854:info:configure *
855:info:configure *>>> Since we just pass this through to the run-time, we're only
856:info:configure *>>> going to warn you here, but ntop might or might not function
857:info:configure *>>> as expected.
858:info:configure *
859:info:configure *???     1. Correct the --with-localedir option and rerun
860:info:configure *???        ./configure
861:info:configure *
862:info:configure *******************************************************************
863:info:configure
864:info:configure checking for an ANSI C-conforming const... yes
865:info:configure checking for working volatile... yes
866:info:configure checking for inline... inline
867:info:configure checking whether char is unsigned... no
868:info:configure checking for long double with more range or precision than double... yes
869:info:configure checking whether byte ordering is bigendian... no
870:info:configure
871:info:configure Testing headers and functions...
872:info:configure
873:info:configure checking for ANSI C header files... (cached) yes
874:info:configure checking for dirent.h that defines DIR... yes
875:info:configure checking for library containing opendir... none required
876:info:configure checking for sys/wait.h that is POSIX.1 compatible... yes
877:info:configure checking whether time.h and sys/time.h may both be included... yes
878:info:configure checking float.h usability... yes
879:info:configure checking float.h presence... yes
880:info:configure checking for float.h... yes
881:info:configure checking stddef.h usability... yes
882:info:configure checking stddef.h presence... yes
883:info:configure checking for stddef.h... yes
884:info:configure checking for stdlib.h... (cached) yes
885:info:configure checking for string.h... (cached) yes
886:info:configure checking pcre.h usability... yes
887:info:configure checking pcre.h presence... yes
888:info:configure checking for pcre.h... yes
889:info:configure checking errno.h usability... yes
890:info:configure checking errno.h presence... yes
891:info:configure checking for errno.h... yes
892:info:configure checking fcntl.h usability... yes
893:info:configure checking fcntl.h presence... yes
894:info:configure checking for fcntl.h... yes
895:info:configure checking limits.h usability... yes
896:info:configure checking limits.h presence... yes
897:info:configure checking for limits.h... yes
898:info:configure checking math.h usability... yes
899:info:configure checking math.h presence... yes
900:info:configure checking for math.h... yes
901:info:configure checking signal.h usability... yes
902:info:configure checking signal.h presence... yes
903:info:configure checking for signal.h... yes
904:info:configure checking stdarg.h usability... yes
905:info:configure checking stdarg.h presence... yes
906:info:configure checking for stdarg.h... yes
907:info:configure checking for unistd.h... (cached) yes
908:info:configure checking stdio.h usability... yes
909:info:configure checking stdio.h presence... yes
910:info:configure checking for stdio.h... yes
911:info:configure checking for strings.h... (cached) yes
912:info:configure checking sys/ioctl.h usability... yes
913:info:configure checking sys/ioctl.h presence... yes
914:info:configure checking for sys/ioctl.h... yes
915:info:configure checking sys/socket.h usability... yes
916:info:configure checking sys/socket.h presence... yes
917:info:configure checking for sys/socket.h... yes
918:info:configure checking sys/time.h usability... yes
919:info:configure checking sys/time.h presence... yes
920:info:configure checking for sys/time.h... yes
921:info:configure checking for sys/types.h... (cached) yes
922:info:configure checking setjmp.h usability... yes
923:info:configure checking setjmp.h presence... yes
924:info:configure checking for setjmp.h... yes
925:info:configure checking ieeefp.h usability... no
926:info:configure checking ieeefp.h presence... no
927:info:configure checking for ieeefp.h... no
928:info:configure checking shadow.h usability... no
929:info:configure checking shadow.h presence... no
930:info:configure checking for shadow.h... no
931:info:configure checking sys/utsname.h usability... yes
932:info:configure checking sys/utsname.h presence... yes
933:info:configure checking for sys/utsname.h... yes
934:info:configure checking netinet/in.h usability... yes
935:info:configure checking netinet/in.h presence... yes
936:info:configure checking for netinet/in.h... yes
937:info:configure checking arpa/inet.h usability... yes
938:info:configure checking arpa/inet.h presence... yes
939:info:configure checking for arpa/inet.h... yes
940:info:configure checking arpa/nameser.h usability... yes
941:info:configure checking arpa/nameser.h presence... yes
942:info:configure checking for arpa/nameser.h... yes
943:info:configure checking net/ethernet.h usability... yes
944:info:configure checking net/ethernet.h presence... yes
945:info:configure checking for net/ethernet.h... yes
946:info:configure checking for zlibVersion in -lz... yes
947:info:configure checking for event_get_version in -levent... yes
948:info:configure checking for RRD home... yes
949:info:configure checking for rrdtool... yes
950:info:configure checking for net/if.h... yes
951:info:configure checking net/if_dl.h usability... yes
952:info:configure checking net/if_dl.h presence... yes
953:info:configure checking for net/if_dl.h... yes
954:info:configure checking for netinet/if_ether.h... yes
955:info:configure checking netinet/in_systm.h usability... yes
956:info:configure checking netinet/in_systm.h presence... yes
957:info:configure checking for netinet/in_systm.h... yes
958:info:configure checking for netinet/ip.h... yes
959:info:configure checking for netinet/ip_icmp.h... yes
960:info:configure checking netinet/tcp.h usability... yes
961:info:configure checking netinet/tcp.h presence... yes
962:info:configure checking for netinet/tcp.h... yes
963:info:configure checking for netinet/udp.h... yes
964:info:configure checking sys/param.h usability... yes
965:info:configure checking sys/param.h presence... yes
966:info:configure checking for sys/param.h... yes
967:info:configure checking for net/if_dl.h... (cached) yes
968:info:configure checking for sys/sysctl.h... yes
969:info:configure checking for net/route.h... yes
970:info:configure checking ethertype.h usability... no
971:info:configure checking ethertype.h presence... no
972:info:configure checking for ethertype.h... no
973:info:configure checking net/ppp_defs.h usability... no
974:info:configure checking net/ppp_defs.h presence... no
975:info:configure checking for net/ppp_defs.h... no
976:info:configure checking for linux/if_pppox.h... no
977:info:configure checking crypt.h usability... no
978:info:configure checking crypt.h presence... no
979:info:configure checking for crypt.h... no
980:info:configure checking pwd.h usability... yes
981:info:configure checking pwd.h presence... yes
982:info:configure checking for pwd.h... yes
983:info:configure checking security/pam_appl.h usability... yes
984:info:configure checking security/pam_appl.h presence... yes
985:info:configure checking for security/pam_appl.h... yes
986:info:configure checking for shadow.h... (cached) no
987:info:configure checking dirent.h usability... yes
988:info:configure checking dirent.h presence... yes
989:info:configure checking for dirent.h... yes
990:info:configure checking for dlfcn.h... (cached) yes
991:info:configure checking dl.h usability... no
992:info:configure checking dl.h presence... no
993:info:configure checking for dl.h... no
994:info:configure checking getopt.h usability... yes
995:info:configure checking getopt.h presence... yes
996:info:configure checking for getopt.h... yes
997:info:configure checking if.h usability... no
998:info:configure checking if.h presence... no
999:info:configure checking for if.h... no
1000:info:configure checking for inttypes.h... (cached) yes
1001:info:configure checking for memory.h... (cached) yes
1002:info:configure checking sys/ldr.h usability... no
1003:info:configure checking sys/ldr.h presence... no
1004:info:configure checking for sys/ldr.h... no
1005:info:configure checking for sys/param.h... (cached) yes
1006:info:configure checking sys/select.h usability... yes
1007:info:configure checking sys/select.h presence... yes
1008:info:configure checking for sys/select.h... yes
1009:info:configure checking sys/sockio.h usability... yes
1010:info:configure checking sys/sockio.h presence... yes
1011:info:configure checking for sys/sockio.h... yes
1012:info:configure checking for sys/stat.h... (cached) yes
1013:info:configure checking sys/un.h usability... yes
1014:info:configure checking sys/un.h presence... yes
1015:info:configure checking for sys/un.h... yes
1016:info:configure checking for sys/wait.h... (cached) yes
1017:info:configure checking zlib.h usability... yes
1018:info:configure checking zlib.h presence... yes
1019:info:configure checking for zlib.h... yes
1020:info:configure checking sched.h usability... yes
1021:info:configure checking sched.h presence... yes
1022:info:configure checking for sched.h... yes
1023:info:configure checking sys/sched.h usability... no
1024:info:configure checking sys/sched.h presence... no
1025:info:configure checking for sys/sched.h... no
1026:info:configure checking pthread.h usability... yes
1027:info:configure checking pthread.h presence... yes
1028:info:configure checking for pthread.h... yes
1029:info:configure checking sys/syslog.h usability... yes
1030:info:configure checking sys/syslog.h presence... yes
1031:info:configure checking for sys/syslog.h... yes
1032:info:configure checking syslog.h usability... yes
1033:info:configure checking syslog.h presence... yes
1034:info:configure checking for syslog.h... yes
1035:info:configure checking tcpd.h usability... yes
1036:info:configure checking tcpd.h presence... yes
1037:info:configure checking for tcpd.h... yes
1038:info:configure checking ip6.h usability... no
1039:info:configure checking ip6.h presence... no
1040:info:configure checking for ip6.h... no
1041:info:configure checking icmp6.h usability... no
1042:info:configure checking icmp6.h presence... no
1043:info:configure checking for icmp6.h... no
1044:info:configure checking for netinet/ip6.h... yes
1045:info:configure checking for netinet/icmp6.h... yes
1046:info:configure checking for sysctl... yes
1047:info:configure checking for finite... yes
1048:info:configure checking for isinf... yes
1049:info:configure checking for pid_t... yes
1050:info:configure checking for size_t... yes
1051:info:configure checking whether time.h and sys/time.h may both be included... (cached) yes
1052:info:configure checking whether struct tm is in sys/time.h or time.h... time.h
1053:info:configure checking for struct tm.tm_zone... yes
1054:info:configure checking for typedef u_int64_t... yes
1055:info:configure checking for typedef uint64_t... no
1056:info:configure checking for typedef u_int32_t... yes
1057:info:configure checking for typedef u_int16_t... yes
1058:info:configure checking for typedef u_int8_t... yes
1059:info:configure checking for typedef int64_t... yes
1060:info:configure checking for typedef int32_t... yes
1061:info:configure checking for typedef int16_t... yes
1062:info:configure checking for typedef int8_t... yes
1063:info:configure checking for backtrace in -lc... yes
1064:info:configure checking for crypt in -lc... yes
1065:info:configure checking for crypt_get_format_get_format in -lc... no
1066:info:configure checking for crypt_get_format in -lcrypt... no
1067:info:configure checking for getopt_long in -lc... yes
1068:info:configure checking for dlopen in -lc... yes
1069:info:configure checking for dladdr (GNU extension)... yes
1070:info:configure checking for sin in -lc... yes
1071:info:configure checking for ceil in -lc... yes
1072:info:configure checking for pthread_create in -lpthread... yes
1073:info:configure checking for sem_init in -lposix4... no
1074:info:configure checking vfork.h usability... no
1075:info:configure checking vfork.h presence... no
1076:info:configure checking for vfork.h... no
1077:info:configure checking for fork... yes
1078:info:configure checking for vfork... yes
1079:info:configure checking for working fork... yes
1080:info:configure checking for working vfork... (cached) yes
1081:info:configure checking whether /Developer/usr/bin/clang needs -traditional... no
1082:info:configure checking for working memcmp... yes
1083:info:configure checking return type of signal handlers... void
1084:info:configure checking whether lstat correctly handles trailing slash... no
1085:info:configure checking whether stat accepts an empty string... no
1086:info:configure checking for strftime... yes
1087:info:configure checking for alarm... yes
1088:info:configure checking for endpwent... yes
1089:info:configure checking for gethostbyaddr... yes
1090:info:configure checking for gethostbyname... yes
1091:info:configure checking for gethostname... yes
1092:info:configure checking for gethostbyaddr_r... no
1093:info:configure checking for getpass... yes
1094:info:configure checking for gettimeofday... yes
1095:info:configure checking for localtime_r... yes
1096:info:configure checking for memchr... yes
1097:info:configure checking for memset... yes
1098:info:configure checking for putenv... yes
1099:info:configure checking for sched_yield... yes
1100:info:configure checking for select... yes
1101:info:configure checking for socket... yes
1102:info:configure checking for snprintf... yes
1103:info:configure checking for sqrtf... yes
1104:info:configure checking for strcasecmp... yes
1105:info:configure checking for strncasecmp... yes
1106:info:configure checking for strcasestr... yes
1107:info:configure checking for strchr... yes
1108:info:configure checking for strrchr... yes
1109:info:configure checking for strcspn... yes
1110:info:configure checking for strdup... yes
1111:info:configure checking for strerror... yes
1112:info:configure checking for strpbrk... yes
1113:info:configure checking for strsignal... yes
1114:info:configure checking for strspn... yes
1115:info:configure checking for strstr... yes
1116:info:configure checking for strtoul... yes
1117:info:configure checking for uname... yes
1118:info:configure checking for strtok_r... yes
1119:info:configure
1120:info:configure Now, let's check for problems with what we've found...
1121:info:configure
1122:info:configure    Testing Required libraries and headers**
1123:info:configure
1124:info:configure checking for required C headers... ok
1125:info:configure checking for crypt... ok
1126:info:configure checking for dynamic load module... skipping - ntop emulates function in ntop_darwin.c
1127:info:configure
1128:info:configure -------------------------------------------------------------------
1129:info:configure
1130:info:configure    **Testing Optional libraries and headers**
1131:info:configure
1132:info:configure checking for Multithreading... ok
1133:info:configure checking for zlib... ok
1134:info:configure checking for perl... perl
1135:info:configure checking whether perl development environment is present... yes
1136:info:configure --2012-01-05 12:13:39--  http://www.lua.org/ftp/lua-5.1.4.tar.gz
1137:info:configure Resolving www.lua.org (www.lua.org)... 2a02:40:41::5
1138:info:configure Connecting to www.lua.org (www.lua.org)|2a02:40:41::5|:80... failed: No route to host.
1139:info:configure tar: Error opening archive: Failed to open 'lua-5.1.4.tar.gz': No such file or directory
1140:info:configure cat: lua-5.1.4/src/Makefile: No such file or directory
1141:info:configure ./configure: line 18318: lua-5.1.4/src/Makefile: No such file or directory
1142:info:configure ./configure: line 18320: cd: lua-5.1.4: No such file or directory
1143:info:configure make: *** No rule to make target `posix'.  Stop.
1144:info:configure checking sctp... no
1145:info:configure checking pthread_atfork... no
1146:info:configure
1147:info:configure Miscelaneous settings...
1148:info:configure
1149:info:configure checking for gcc backtrace... found - automatic SIGSEGV backtrace enabled via -K
1150:info:configure checking for gcc getopt_long... found - long command line options are enabled
1151:info:configure checking for facilitynames - define SYSLOG_NAMES option... unavailable
1152:info:configure checking if ether_header uses ether_addr structs... no
1153:info:configure checking if in6_addr is defined for sFlowPlugin... yes
1154:info:configure
1155:info:configure -------------------------------------------------------------------
1156:info:configure
1157:info:configure Removing dups and misplaced entries from LIBS and INCS...
1158:info:configure checking GeoIP.h usability... yes
1159:info:configure checking GeoIP.h presence... yes
1160:info:configure checking for GeoIP.h... yes
1161:info:configure checking for GeoIP_open in -lGeoIP... no
1162:info:configure configure: error: in `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10':
1163:info:configure configure: error: GeoIP library is missing
1164:info:configure See `config.log' for more details
1165:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl " returned error 1
1166:error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details)
1167:debug:configure Backtrace: configure failure: shell command failed (see log for details)
1168    while executing
1169"$procedure $targetname"
1170:info:configure Warning: the following items did not execute (for ntop): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
1171:notice:configure Log for ntop is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/main.log