| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.27.1_2 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.27.1_2 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.27.1_2 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main No need to upgrade! pkgconfig 0.27.1_2 >= pkgconfig 0.27.1_2 |
|---|
| 16 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 17 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 18 | :debug:main libiconv 1.14_0 is the latest installed |
|---|
| 19 | :debug:main libiconv 1.14_0 is active |
|---|
| 20 | :debug:main Merging existing variants '' into variants |
|---|
| 21 | :debug:main new fully merged portvariants: |
|---|
| 22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv |
|---|
| 23 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 28 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 29 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 30 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 31 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 32 | :debug:main python27 2.7.3_1 exists in the ports tree |
|---|
| 33 | :debug:main python27 2.7.3_1 is the latest installed |
|---|
| 34 | :debug:main python27 2.7.3_1 is active |
|---|
| 35 | :debug:main Merging existing variants '' into variants |
|---|
| 36 | :debug:main new fully merged portvariants: |
|---|
| 37 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 |
|---|
| 38 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 39 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 43 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 44 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 45 | :debug:main No need to upgrade! python27 2.7.3_1 >= python27 2.7.3_1 |
|---|
| 46 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 47 | :debug:main gettext 0.18.2_0 exists in the ports tree |
|---|
| 48 | :debug:main gettext 0.18.2_0 is the latest installed |
|---|
| 49 | :debug:main gettext 0.18.2_0 is active |
|---|
| 50 | :debug:main Merging existing variants '' into variants |
|---|
| 51 | :debug:main new fully merged portvariants: |
|---|
| 52 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext |
|---|
| 53 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 54 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 57 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl |
|---|
| 58 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 59 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 60 | :debug:main compiler clang 163.7.1 blacklisted because matches {clang < 211.10.1} |
|---|
| 61 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 62 | :debug:main No need to upgrade! gettext 0.18.2_0 >= gettext 0.18.2_0 |
|---|
| 63 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 64 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 65 | :debug:main ncurses 5.9_1 is the latest installed |
|---|
| 66 | :debug:main ncurses 5.9_1 is active |
|---|
| 67 | :debug:main Merging existing variants '' into variants |
|---|
| 68 | :debug:main new fully merged portvariants: |
|---|
| 69 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses |
|---|
| 70 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 71 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 72 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 73 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 74 | :debug:main adding the default universal variant |
|---|
| 75 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 76 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 77 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 78 | :debug:main expat 2.1.0_0 exists in the ports tree |
|---|
| 79 | :debug:main expat 2.1.0_0 is the latest installed |
|---|
| 80 | :debug:main expat 2.1.0_0 is active |
|---|
| 81 | :debug:main Merging existing variants '' into variants |
|---|
| 82 | :debug:main new fully merged portvariants: |
|---|
| 83 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat |
|---|
| 84 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 85 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 87 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 88 | :debug:main adding the default universal variant |
|---|
| 89 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 90 | :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 |
|---|
| 91 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 92 | :debug:main zlib 1.2.7_0 exists in the ports tree |
|---|
| 93 | :debug:main zlib 1.2.7_0 is the latest installed |
|---|
| 94 | :debug:main zlib 1.2.7_0 is active |
|---|
| 95 | :debug:main Merging existing variants '' into variants |
|---|
| 96 | :debug:main new fully merged portvariants: |
|---|
| 97 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib |
|---|
| 98 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 99 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 102 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 103 | :debug:main adding the default universal variant |
|---|
| 104 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 105 | :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 |
|---|
| 106 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 107 | :debug:main openssl 1.0.1c_0 exists in the ports tree |
|---|
| 108 | :debug:main openssl 1.0.1c_0 is the latest installed |
|---|
| 109 | :debug:main openssl 1.0.1c_0 is active |
|---|
| 110 | :debug:main Merging existing variants '' into variants |
|---|
| 111 | :debug:main new fully merged portvariants: |
|---|
| 112 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl |
|---|
| 113 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 114 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 115 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 116 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 117 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 118 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 119 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 120 | :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0 |
|---|
| 121 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 122 | :debug:main sqlite3 3.7.15.1_0 exists in the ports tree |
|---|
| 123 | :debug:main sqlite3 3.7.15.1_0 is the latest installed |
|---|
| 124 | :debug:main sqlite3 3.7.15.1_0 is active |
|---|
| 125 | :debug:main Merging existing variants '' into variants |
|---|
| 126 | :debug:main new fully merged portvariants: |
|---|
| 127 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 |
|---|
| 128 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 129 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 130 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 131 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 132 | :debug:main adding the default universal variant |
|---|
| 133 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 134 | :debug:main No need to upgrade! sqlite3 3.7.15.1_0 >= sqlite3 3.7.15.1_0 |
|---|
| 135 | :debug:main epoch: in tree: 20090923 installed: 20090923 |
|---|
| 136 | :debug:main libedit 20121213-3.0_0 exists in the ports tree |
|---|
| 137 | :debug:main libedit 20121213-3.0_0 is the latest installed |
|---|
| 138 | :debug:main libedit 20121213-3.0_0 is active |
|---|
| 139 | :debug:main Merging existing variants '' into variants |
|---|
| 140 | :debug:main new fully merged portvariants: |
|---|
| 141 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit |
|---|
| 142 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 143 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 144 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 145 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 146 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 147 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 148 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 149 | :debug:main No need to upgrade! libedit 20121213-3.0_0 >= libedit 20121213-3.0_0 |
|---|
| 150 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 151 | :debug:main db46 4.6.21_7 exists in the ports tree |
|---|
| 152 | :debug:main db46 4.6.21_7 is the latest installed |
|---|
| 153 | :debug:main db46 4.6.21_7 is active |
|---|
| 154 | :debug:main Merging existing variants '' into variants |
|---|
| 155 | :debug:main new fully merged portvariants: |
|---|
| 156 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 |
|---|
| 157 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 158 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 159 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 160 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 162 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 163 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 164 | :debug:main No need to upgrade! db46 4.6.21_7 >= db46 4.6.21_7 |
|---|
| 165 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 166 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 167 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 168 | :debug:main bzip2 1.0.6_0 is active |
|---|
| 169 | :debug:main Merging existing variants '' into variants |
|---|
| 170 | :debug:main new fully merged portvariants: |
|---|
| 171 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 |
|---|
| 172 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 173 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 174 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 175 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 176 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 177 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 178 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 179 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 180 | :debug:main python_select 0.3_2 exists in the ports tree |
|---|
| 181 | :debug:main python_select 0.3_2 is the latest installed |
|---|
| 182 | :debug:main python_select 0.3_2 is active |
|---|
| 183 | :debug:main Merging existing variants '' into variants |
|---|
| 184 | :debug:main new fully merged portvariants: |
|---|
| 185 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select |
|---|
| 186 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 187 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 188 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 189 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 190 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 191 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 192 | :debug:main No need to upgrade! python_select 0.3_2 >= python_select 0.3_2 |
|---|
| 193 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 194 | :debug:main py27-sip 4.14.2_0 exists in the ports tree |
|---|
| 195 | :debug:main py27-sip 4.14.2_0 is the latest installed |
|---|
| 196 | :debug:main py27-sip 4.14.2_0 is active |
|---|
| 197 | :debug:main Merging existing variants '' into variants |
|---|
| 198 | :debug:main new fully merged portvariants: |
|---|
| 199 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-sip |
|---|
| 200 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 201 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 202 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 203 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 204 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl |
|---|
| 205 | :debug:main Re-registering default for build.cmd |
|---|
| 206 | :debug:main Re-registering default for destroot.cmd |
|---|
| 207 | :debug:main Re-registering default for destroot.destdir |
|---|
| 208 | :debug:main adding the default universal variant |
|---|
| 209 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 210 | :debug:main No need to upgrade! py27-sip 4.14.2_0 >= py27-sip 4.14.2_0 |
|---|
| 211 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 212 | :debug:main qt4-mac 4.8.4_2 exists in the ports tree |
|---|
| 213 | :debug:main qt4-mac 4.8.4_2 +quartz is the latest installed |
|---|
| 214 | :debug:main qt4-mac 4.8.4_2 +quartz is active |
|---|
| 215 | :debug:main Merging existing variants '+quartz' into variants |
|---|
| 216 | :debug:main new fully merged portvariants: quartz + |
|---|
| 217 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/qt4-mac |
|---|
| 218 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 219 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 220 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 221 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 222 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl |
|---|
| 223 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 224 | :debug:main adding the default universal variant |
|---|
| 225 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 226 | :debug:main Executing variant quartz provides quartz |
|---|
| 227 | :debug:main No need to upgrade! qt4-mac 4.8.4_2 >= qt4-mac 4.8.4_2 |
|---|
| 228 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 229 | :debug:main dbus 1.6.8_0 exists in the ports tree |
|---|
| 230 | :debug:main dbus 1.6.8_0 +startupitem is the latest installed |
|---|
| 231 | :debug:main dbus 1.6.8_0 +startupitem is active |
|---|
| 232 | :debug:main Merging existing variants '+startupitem' into variants |
|---|
| 233 | :debug:main new fully merged portvariants: startupitem + |
|---|
| 234 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus |
|---|
| 235 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 236 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 237 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 238 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 239 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 240 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 241 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 242 | :debug:main Executing variant startupitem provides startupitem |
|---|
| 243 | :debug:main No need to upgrade! dbus 1.6.8_0 >= dbus 1.6.8_0 |
|---|
| 244 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 245 | :debug:main tiff 3.9.7_0 exists in the ports tree |
|---|
| 246 | :debug:main tiff 3.9.7_0 is the latest installed |
|---|
| 247 | :debug:main tiff 3.9.7_0 is active |
|---|
| 248 | :debug:main Merging existing variants '' into variants |
|---|
| 249 | :debug:main new fully merged portvariants: |
|---|
| 250 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff |
|---|
| 251 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 252 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 253 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 254 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 255 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 256 | :debug:main adding the default universal variant |
|---|
| 257 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 258 | :debug:main No need to upgrade! tiff 3.9.7_0 >= tiff 3.9.7_0 |
|---|
| 259 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 260 | :debug:main jpeg 8d_0 exists in the ports tree |
|---|
| 261 | :debug:main jpeg 8d_0 is the latest installed |
|---|
| 262 | :debug:main jpeg 8d_0 is active |
|---|
| 263 | :debug:main Merging existing variants '' into variants |
|---|
| 264 | :debug:main new fully merged portvariants: |
|---|
| 265 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg |
|---|
| 266 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 267 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 268 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 269 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 270 | :debug:main adding the default universal variant |
|---|
| 271 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 272 | :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0 |
|---|
| 273 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 274 | :debug:main libpng 1.5.13_0 exists in the ports tree |
|---|
| 275 | :debug:main libpng 1.5.13_0 is the latest installed |
|---|
| 276 | :debug:main libpng 1.5.13_0 is active |
|---|
| 277 | :debug:main Merging existing variants '' into variants |
|---|
| 278 | :debug:main new fully merged portvariants: |
|---|
| 279 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng |
|---|
| 280 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 281 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 282 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 283 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 284 | :debug:main adding the default universal variant |
|---|
| 285 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 286 | :debug:main No need to upgrade! libpng 1.5.13_0 >= libpng 1.5.13_0 |
|---|
| 287 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 288 | :debug:main libmng 1.0.10_2 exists in the ports tree |
|---|
| 289 | :debug:main libmng 1.0.10_2 is the latest installed |
|---|
| 290 | :debug:main libmng 1.0.10_2 is active |
|---|
| 291 | :debug:main Merging existing variants '' into variants |
|---|
| 292 | :debug:main new fully merged portvariants: |
|---|
| 293 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libmng |
|---|
| 294 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 295 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 296 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 297 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 298 | :debug:main adding the default universal variant |
|---|
| 299 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 300 | :debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2 |
|---|
| 301 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 302 | :debug:main lcms 1.19_2 exists in the ports tree |
|---|
| 303 | :debug:main lcms 1.19_2 is the latest installed |
|---|
| 304 | :debug:main lcms 1.19_2 is active |
|---|
| 305 | :debug:main Merging existing variants '' into variants |
|---|
| 306 | :debug:main new fully merged portvariants: |
|---|
| 307 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms |
|---|
| 308 | :debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386 |
|---|
| 309 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 310 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 311 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 312 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 313 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 314 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 315 | :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 |
|---|
| 316 | :msg:main ---> Computing dependencies for py27-pyqt4:info:main .:debug:main py27-pyqt4 has no conflicts |
|---|
| 317 | :debug:main Searching for dependency: pkgconfig |
|---|
| 318 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 319 | :debug:main Searching for dependency: python27 |
|---|
| 320 | :debug:main Found Dependency: receipt exists for python27 |
|---|
| 321 | :debug:main Searching for dependency: py27-sip |
|---|
| 322 | :debug:main Found Dependency: receipt exists for py27-sip |
|---|
| 323 | :debug:main Searching for dependency: qt4-mac |
|---|
| 324 | :debug:main Found Dependency: receipt exists for qt4-mac |
|---|
| 325 | :msg:main |
|---|
| 326 | :debug:main Executing org.macports.main (py27-pyqt4) |
|---|
| 327 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 328 | :debug:main egid changed to: 501 |
|---|
| 329 | :debug:main euid changed to: 502 |
|---|
| 330 | :debug:archivefetch archivefetch phase started at Wed Jan 9 22:21:57 CET 2013 |
|---|
| 331 | :msg:archivefetch ---> Fetching archive for py27-pyqt4 |
|---|
| 332 | :debug:archivefetch Executing org.macports.archivefetch (py27-pyqt4) |
|---|
| 333 | :debug:archivefetch euid/egid changed to: 0/0 |
|---|
| 334 | :debug:archivefetch chowned /opt/local/var/macports/incoming to macports |
|---|
| 335 | :debug:archivefetch euid/egid changed to: 502/501 |
|---|
| 336 | :info:archivefetch ---> py27-pyqt4-4.9.6_1.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified |
|---|
| 337 | :msg:archivefetch ---> Attempting to fetch py27-pyqt4-4.9.6_1.darwin_11.x86_64.tbz2 from http://lil.fr.packages.macports.org/py27-pyqt4 |
|---|
| 338 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 339 | :msg:archivefetch ---> Attempting to fetch py27-pyqt4-4.9.6_1.darwin_11.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/py27-pyqt4 |
|---|
| 340 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 341 | :msg:archivefetch ---> Attempting to fetch py27-pyqt4-4.9.6_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/py27-pyqt4 |
|---|
| 342 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 343 | :msg:archivefetch ---> Attempting to fetch py27-pyqt4-4.9.6_1.darwin_11.x86_64.tbz2 from http://jog.id.packages.macports.org/macports/packages/py27-pyqt4 |
|---|
| 344 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 345 | :debug:archivefetch Privilege de-escalation not attempted as not running as root. |
|---|
| 346 | :debug:fetch fetch phase started at Wed Jan 9 22:22:00 CET 2013 |
|---|
| 347 | :notice:fetch ---> Fetching distfiles for py27-pyqt4 |
|---|
| 348 | :debug:fetch Executing org.macports.fetch (py27-pyqt4) |
|---|
| 349 | :debug:fetch Privilege de-escalation not attempted as not running as root. |
|---|
| 350 | :debug:checksum checksum phase started at Wed Jan 9 22:22:00 CET 2013 |
|---|
| 351 | :notice:checksum ---> Verifying checksum(s) for py27-pyqt4 |
|---|
| 352 | :debug:checksum Executing org.macports.checksum (py27-pyqt4) |
|---|
| 353 | :info:checksum ---> Checksumming PyQt-mac-gpl-4.9.6.tar.gz |
|---|
| 354 | :debug:checksum Correct (sha1) checksum for PyQt-mac-gpl-4.9.6.tar.gz |
|---|
| 355 | :debug:checksum Correct (rmd160) checksum for PyQt-mac-gpl-4.9.6.tar.gz |
|---|
| 356 | :debug:checksum Privilege de-escalation not attempted as not running as root. |
|---|
| 357 | :debug:extract extract phase started at Wed Jan 9 22:22:00 CET 2013 |
|---|
| 358 | :notice:extract ---> Extracting py27-pyqt4 |
|---|
| 359 | :debug:extract Executing proc-pre-org.macports.extract-extract-0 |
|---|
| 360 | :debug:extract Executing org.macports.extract (py27-pyqt4) |
|---|
| 361 | :info:extract ---> Extracting PyQt-mac-gpl-4.9.6.tar.gz |
|---|
| 362 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/python/PyQt-mac-gpl-4.9.6.tar.gz' |
|---|
| 363 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 364 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/python/PyQt-mac-gpl-4.9.6.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 365 | :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/python/PyQt-mac-gpl-4.9.6.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - |
|---|
| 366 | :debug:extract euid/egid changed to: 0/0 |
|---|
| 367 | :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work to macports |
|---|
| 368 | :debug:extract euid/egid changed to: 502/501 |
|---|
| 369 | :debug:extract Privilege de-escalation not attempted as not running as root. |
|---|
| 370 | :debug:patch patch phase started at Wed Jan 9 22:22:02 CET 2013 |
|---|
| 371 | :debug:patch Executing org.macports.patch (py27-pyqt4) |
|---|
| 372 | :notice:patch ---> Applying patches to py27-pyqt4 |
|---|
| 373 | :info:patch ---> Applying patch-configure.py |
|---|
| 374 | :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 375 | :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /usr/bin/patch -p0' |
|---|
| 376 | :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-pyqt4/files/patch-configure.py' |
|---|
| 377 | :info:patch patching file configure.py |
|---|
| 378 | :info:patch ---> Applying patch-fix-qt_apps_dir.diff |
|---|
| 379 | :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 380 | :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /usr/bin/patch -p0' |
|---|
| 381 | :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-pyqt4/files/patch-fix-qt_apps_dir.diff' |
|---|
| 382 | :info:patch patching file examples/demos/qtdemo/menumanager.py |
|---|
| 383 | :info:patch patching file examples/designer/plugins/plugins.py |
|---|
| 384 | :debug:patch Executing proc-post-org.macports.patch-patch-0 |
|---|
| 385 | :debug:patch Executing reinplace: /usr/bin/sed s|@@MACPORTS_PYTHON_FRAMEWORK@@|/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python| < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/configure.py >@ file10 |
|---|
| 386 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 387 | :debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/configure.py to macports |
|---|
| 388 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 389 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 390 | :debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/configure.py |
|---|
| 391 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 392 | :debug:patch Executing reinplace: /usr/bin/sed s|@QT_APPS_DIR@|/Applications/MacPorts/Qt4| < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/demos/qtdemo/menumanager.py >@ file10 |
|---|
| 393 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 394 | :debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/demos/qtdemo/menumanager.py to macports |
|---|
| 395 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 396 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 397 | :debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/demos/qtdemo/menumanager.py |
|---|
| 398 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 399 | :debug:patch Executing reinplace: /usr/bin/sed s|@QT_APPS_DIR@|/Applications/MacPorts/Qt4| < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/designer/plugins/plugins.py >@ file10 |
|---|
| 400 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 401 | :debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/designer/plugins/plugins.py to macports |
|---|
| 402 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 403 | :debug:patch euid/egid changed to: 0/0 |
|---|
| 404 | :debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6/examples/designer/plugins/plugins.py |
|---|
| 405 | :debug:patch euid/egid changed to: 502/501 |
|---|
| 406 | :debug:patch Privilege de-escalation not attempted as not running as root. |
|---|
| 407 | :debug:configure configure phase started at Wed Jan 9 22:22:03 CET 2013 |
|---|
| 408 | :notice:configure ---> Configuring py27-pyqt4 |
|---|
| 409 | :debug:configure Using compiler 'Mac OS X clang' |
|---|
| 410 | :debug:configure Executing proc-pre-org.macports.configure-configure-0 |
|---|
| 411 | :debug:configure Executing org.macports.configure (py27-pyqt4) |
|---|
| 412 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/clang' INSTALL='/usr/bin/install -c' MOC='/opt/local/bin/moc' QMAKESPEC='macx-g++' FFLAGS='-pipe -O2 -m64' OBJCFLAGS='-pipe -O2 -arch x86_64' QTDIR='/opt/local' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' QMAKE='/opt/local/bin/qmake' |
|---|
| 413 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 configure.py -q /opt/local/bin/qmake --verbose --confirm-license -e QtGui -e QtHelp -e QtMultimedia -e QtNetwork -e QtDeclarative -e QtOpenGL -e QtScript -e QtScriptTools -e QtSql -e QtSvg -e QtTest -e QtWebKit -e QtXml -e QtXmlPatterns -e QAxContainer --no-qsci-api -e QtDesigner LFLAGS="-F/opt/local/Library/Frameworks -L/opt/local/lib"' |
|---|
| 414 | :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 configure.py -q /opt/local/bin/qmake --verbose --confirm-license -e QtGui -e QtHelp -e QtMultimedia -e QtNetwork -e QtDeclarative -e QtOpenGL -e QtScript -e QtScriptTools -e QtSql -e QtSvg -e QtTest -e QtWebKit -e QtXml -e QtXmlPatterns -e QAxContainer --no-qsci-api -e QtDesigner LFLAGS="-F/opt/local/Library/Frameworks -L/opt/local/lib" |
|---|
| 415 | :info:configure Error: qtdirs.app/Contents/MacOS/qtdirs failed to create qtdirs.out. Make sure |
|---|
| 416 | :info:configure your Qt installation is correct. |
|---|
| 417 | :info:configure Determining the layout of your Qt installation... |
|---|
| 418 | :info:configure /opt/local/bin/qmake -spec macx-g++ -o qtdirs.mk qtdirs.pro |
|---|
| 419 | :info:configure Project MESSAGE: qtAddLibrary: found framework QtCore in directory /opt/local/Library/Frameworks |
|---|
| 420 | :info:configure make -f qtdirs.mk |
|---|
| 421 | :info:configure /usr/bin/clang++ -c -pipe -O2 -arch x86_64 -Xarch_x86_64 -mmacosx-version-min=10.7 -Wall -W -DQT_NO_DEBUG -DQT_CORE_LIB -DQT_SHARED -I/opt/local/share/qt4/mkspecs/macx-g++ -I. -I. -I/opt/local/Library/Frameworks/QtCore.framework/Versions/4/Headers -I/opt/local/Library/Frameworks/QtCore.framework/Versions/4/Headers -I/opt/local/include -F/opt/local/Library/Frameworks -F/opt/local/lib -o qtdirs.o qtdirs.cpp |
|---|
| 422 | :info:configure /usr/bin/clang++ -headerpad_max_install_names -arch x86_64 -Xarch_x86_64 -mmacosx-version-min=10.7 -o qtdirs.app/Contents/MacOS/qtdirs qtdirs.o -F/opt/local/Library/Frameworks -F/opt/local/lib -F/opt/local/Library/Frameworks -F/opt/local/lib -L/opt/local/lib -framework QtCore |
|---|
| 423 | :info:configure qtdirs.app/Contents/MacOS/qtdirs |
|---|
| 424 | :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/work/PyQt-mac-gpl-4.9.6" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 configure.py -q /opt/local/bin/qmake --verbose --confirm-license -e QtGui -e QtHelp -e QtMultimedia -e QtNetwork -e QtDeclarative -e QtOpenGL -e QtScript -e QtScriptTools -e QtSql -e QtSvg -e QtTest -e QtWebKit -e QtXml -e QtXmlPatterns -e QAxContainer --no-qsci-api -e QtDesigner LFLAGS="-F/opt/local/Library/Frameworks -L/opt/local/lib" |
|---|
| 425 | :info:configure Exit code: 1 |
|---|
| 426 | :error:configure org.macports.configure for port py27-pyqt4 returned: configure failure: command execution failed |
|---|
| 427 | :debug:configure Error code: NONE |
|---|
| 428 | :debug:configure Backtrace: configure failure: command execution failed |
|---|
| 429 | while executing |
|---|
| 430 | "$procedure $targetname" |
|---|
| 431 | :info:configure Warning: targets not executed for py27-pyqt4: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 432 | :notice:configure Please see the log file for port py27-pyqt4 for details: |
|---|
| 433 | /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/main.log |
|---|
