| 1 | ---> Computing dependencies for perl5.12 |
|---|
| 2 | ---> Fetching archive for perl5.12 |
|---|
| 3 | ---> perl5.12-5.12.4_2+universal.darwin_10.i386-x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified |
|---|
| 4 | ---> Attempting to fetch perl5.12-5.12.4_2+universal.darwin_10.i386-x86_64.tbz2 from http://packages.macports.org/perl5.12 |
|---|
| 5 | ---> Attempting to fetch perl5.12-5.12.4_2+universal.darwin_10.i386-x86_64.tbz2 from http://lil.fr.packages.macports.org/perl5.12 |
|---|
| 6 | ---> Attempting to fetch perl5.12-5.12.4_2+universal.darwin_10.i386-x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/perl5.12 |
|---|
| 7 | ---> Fetching distfiles for perl5.12 |
|---|
| 8 | ---> Verifying checksum(s) for perl5.12 |
|---|
| 9 | ---> Checksumming perl-5.12.4.tar.bz2 |
|---|
| 10 | ---> Extracting perl5.12 |
|---|
| 11 | ---> Extracting perl-5.12.4.tar.bz2 |
|---|
| 12 | ---> Applying patches to perl5.12 |
|---|
| 13 | ---> Applying patch-Configure.diff |
|---|
| 14 | patching file Configure |
|---|
| 15 | Hunk #1 succeeded at 108 (offset 5 lines). |
|---|
| 16 | Hunk #2 succeeded at 1312 (offset 9 lines). |
|---|
| 17 | Hunk #3 succeeded at 1338 (offset 9 lines). |
|---|
| 18 | ---> Applying patch-handy.h.stdbool.diff |
|---|
| 19 | patching file handy.h |
|---|
| 20 | ---> Applying patch-hints_darwin.sh.diff |
|---|
| 21 | patching file hints/darwin.sh |
|---|
| 22 | ---> Configuring perl5.12 |
|---|
| 23 | First let's make sure your kit is complete. Checking... |
|---|
| 24 | Locating common programs... |
|---|
| 25 | Checking compatibility between /bin/echo and builtin echo (if any)... |
|---|
| 26 | Symbolic links are supported. |
|---|
| 27 | Checking how to test for symbolic links... |
|---|
| 28 | You can test for symbolic links with 'test -h'. |
|---|
| 29 | Good, your tr supports [:lower:] and [:upper:] to convert case. |
|---|
| 30 | Using [:upper:] and [:lower:] to convert case. |
|---|
| 31 | 3b1 dos_djgpp irix_6 openbsd sunos_4_1 |
|---|
| 32 | aix dragonfly irix_6_0 opus super-ux |
|---|
| 33 | aix_3 dynix irix_6_1 os2 svr4 |
|---|
| 34 | aix_4 dynixptx isc os390 svr5 |
|---|
| 35 | altos486 epix isc_2 os400 ti1500 |
|---|
| 36 | amigaos esix4 linux posix-bc titanos |
|---|
| 37 | apollo fps lynxos powerux ultrix_4 |
|---|
| 38 | atheos freebsd midnightbsd qnx umips |
|---|
| 39 | aux_3 genix mips rhapsody unicos |
|---|
| 40 | beos gnu mirbsd riscos unicosmk |
|---|
| 41 | bsdos gnukfreebsd mpc sco unisysdynix |
|---|
| 42 | catamount gnuknetbsd mpeix sco_2_3_0 utekv |
|---|
| 43 | convexos greenhills ncr_tower sco_2_3_1 uts |
|---|
| 44 | cxux haiku netbsd sco_2_3_2 uwin |
|---|
| 45 | cygwin hpux newsos4 sco_2_3_3 vmesa |
|---|
| 46 | darwin i386 next_3 sco_2_3_4 vos |
|---|
| 47 | dcosx interix next_3_0 solaris_2 |
|---|
| 48 | dec_osf irix_4 next_4 stellar |
|---|
| 49 | dgux irix_5 nonstopux sunos_4_0 |
|---|
| 50 | Which of these apply, if any? [darwin] |
|---|
| 51 | Operating system name? [darwin] |
|---|
| 52 | Operating system version? [10.8.0] |
|---|
| 53 | Installation prefix to use? (~name ok) [/opt/local] |
|---|
| 54 | AFS may be running... I'll be extra cautious then... |
|---|
| 55 | What installation prefix should I use for installing files? (~name ok) |
|---|
| 56 | [/opt/local] |
|---|
| 57 | Build Perl for SOCKS? [n] |
|---|
| 58 | Use the PerlIO abstraction layer? [y] |
|---|
| 59 | Getting the current patchlevel... |
|---|
| 60 | Build a threading Perl? [y] |
|---|
| 61 | Use which C compiler? [/usr/bin/gcc-4.2] |
|---|
| 62 | Checking for GNU cc in disguise and/or its version number... |
|---|
| 63 | Now, how can we feed standard input to your C preprocessor... |
|---|
| 64 | Directories to use for library searches? [/opt/local/lib /usr/lib] |
|---|
| 65 | What is the file extension used for shared libraries? [dylib] |
|---|
| 66 | Try to use long doubles if available? [n] |
|---|
| 67 | Checking for optional libraries... |
|---|
| 68 | What libraries to use? [-lgdbm -ldbm -ldl -lm -lutil -lc] |
|---|
| 69 | What optimizer/debugger flag should be used? [-O3] |
|---|
| 70 | Any additional cc flags? |
|---|
| 71 | [-pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include] |
|---|
| 72 | Let me guess what the preprocessor flags are... |
|---|
| 73 | Any additional ld flags (NOT including libraries)? |
|---|
| 74 | [-L/opt/local/lib -arch x86_64 -arch i386 -fstack-protector] |
|---|
| 75 | Checking your choice of C compiler and flags for coherency... |
|---|
| 76 | Computing filename position in cpp output for #include directives... |
|---|
| 77 | <stdlib.h> found. |
|---|
| 78 | Checking to see how big your integers are... |
|---|
| 79 | Checking to see if you have long long... |
|---|
| 80 | Checking to see how big your long longs are... |
|---|
| 81 | <inttypes.h> found. |
|---|
| 82 | Checking to see if you have int64_t... |
|---|
| 83 | Checking which 64-bit integer type we could use... |
|---|
| 84 | We could use 'long' for 64-bit integers. |
|---|
| 85 | Try to use maximal 64-bit support, if available? [y] |
|---|
| 86 | Checking to see how big your double precision numbers are... |
|---|
| 87 | Checking to see if you have long double... |
|---|
| 88 | Checking to see how big your long doubles are... |
|---|
| 89 | What is your architecture name [darwin] |
|---|
| 90 | Threads selected. |
|---|
| 91 | ...setting architecture name to darwin-thread. |
|---|
| 92 | Multiplicity selected. |
|---|
| 93 | ...setting architecture name to darwin-thread-multi. |
|---|
| 94 | This architecture is naturally 64-bit, not changing architecture name. |
|---|
| 95 | Perlio selected. |
|---|
| 96 | Pathname where the public executables will reside? (~name ok) |
|---|
| 97 | [/opt/local/bin] |
|---|
| 98 | Use relocatable @INC? [n] |
|---|
| 99 | Pathname where the private library files will reside? (~name ok) |
|---|
| 100 | [/opt/local/lib/perl5/5.12.4] |
|---|
| 101 | Where do you want to put the public architecture-dependent libraries? (~name ok) |
|---|
| 102 | [/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level] |
|---|
| 103 | Other username to test security of setuid scripts with? [none] |
|---|
| 104 | I'll assume setuid scripts are *not* secure. |
|---|
| 105 | Does your kernel have *secure* setuid scripts? [n] |
|---|
| 106 | Installation prefix to use for add-on modules and utilities? (~name ok) |
|---|
| 107 | [/opt/local] |
|---|
| 108 | Pathname for the site-specific library files? (~name ok) |
|---|
| 109 | [/opt/local/lib/perl5/site_perl/5.12.4] |
|---|
| 110 | List of earlier versions to include in @INC? |
|---|
| 111 | [5.12.3/darwin-thread-multi-2level 5.12.3 5.12.2/darwin-thread-multi-2level 5.12.2 5.12.1/darwin-thread-multi-2level 5.12.1 5.12.0/darwin-thread-multi-2level 5.12.0] |
|---|
| 112 | <malloc/malloc.h> found. |
|---|
| 113 | <malloc.h> NOT found. |
|---|
| 114 | Checking to see how well your C compiler groks the void type... |
|---|
| 115 | Good. It appears to support void to the level perl5 wants. |
|---|
| 116 | Checking to see how big your pointers are... |
|---|
| 117 | Do you wish to wrap malloc calls to protect against potential overflows? [y] |
|---|
| 118 | Do you wish to attempt to use the malloc that comes with perl5? [n] |
|---|
| 119 | Your system wants malloc to return 'void *', it would seem. |
|---|
| 120 | Your system uses void free(), it would seem. |
|---|
| 121 | Pathname for the site-specific architecture-dependent library files? (~name ok) |
|---|
| 122 | [/opt/local/lib/perl5/site_perl/5.12.4/darwin-thread-multi-2level] |
|---|
| 123 | Do you want to configure vendor-specific add-on directories? [y] |
|---|
| 124 | Installation prefix to use for vendor-supplied add-ons? (~name ok) |
|---|
| 125 | [/opt/local] |
|---|
| 126 | Pathname for the vendor-supplied library files? (~name ok) |
|---|
| 127 | [/opt/local/lib/perl5/vendor_perl/5.12.4] |
|---|
| 128 | Pathname for vendor-supplied architecture-dependent files? (~name ok) |
|---|
| 129 | [/opt/local/lib/perl5/vendor_perl/5.12.4/darwin-thread-multi-2level] |
|---|
| 130 | Colon-separated list of additional directories for perl to search? [none] |
|---|
| 131 | Checking out function prototypes... |
|---|
| 132 | Support DTrace if available? [n] |
|---|
| 133 | Install any extra modules (y or n)? [n] |
|---|
| 134 | Directory for the main Perl5 html pages? (~name ok) [none] |
|---|
| 135 | Directory for the Perl5 module html pages? (~name ok) [none] |
|---|
| 136 | Do you want to install perl as /usr/bin/perl? [n] |
|---|
| 137 | Checking for GNU C Library... |
|---|
| 138 | Shall I use /opt/local/bin/nm to extract C symbols from the libraries? [n] |
|---|
| 139 | <dld.h> NOT found. |
|---|
| 140 | Checking for C++... |
|---|
| 141 | dlopen() found. |
|---|
| 142 | <unistd.h> found. |
|---|
| 143 | Do you wish to use dynamic loading? [y] |
|---|
| 144 | Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs] |
|---|
| 145 | Any special flags to pass to /usr/bin/gcc-4.2 -c to compile shared library modules? |
|---|
| 146 | [none] |
|---|
| 147 | What command should be used to create dynamic libraries? |
|---|
| 148 | [env MACOSX_DEPLOYMENT_TARGET=10.6 /usr/bin/gcc-4.2] |
|---|
| 149 | Any special flags to pass to env MACOSX_DEPLOYMENT_TARGET=10.6 /usr/bin/gcc-4.2 to create a dynamically loaded library? |
|---|
| 150 | [-L/opt/local/lib -arch x86_64 -arch i386 -bundle -undefined dynamic_lookup -fstack-protector] |
|---|
| 151 | Any special flags to pass to /usr/bin/gcc-4.2 to use dynamic linking? [none] |
|---|
| 152 | Build a shared libperl.dylib (y/n) [y] |
|---|
| 153 | What name do you want to give to the shared libperl? [libperl.dylib] |
|---|
| 154 | System manual is in /usr/share/man/man1. |
|---|
| 155 | Where do the main Perl5 manual pages (source) go? (~name ok) |
|---|
| 156 | [/opt/local/share/man/man1p] |
|---|
| 157 | What suffix should be used for the main Perl5 man pages? [1pm] |
|---|
| 158 | You can have filenames longer than 14 characters. |
|---|
| 159 | Where do the perl5 library man pages (source) go? (~name ok) |
|---|
| 160 | [/opt/local/share/man/man3p] |
|---|
| 161 | What suffix should be used for the perl5 library man pages? [3pm] |
|---|
| 162 | Figuring out host name... |
|---|
| 163 | Your host name appears to be "jd-mbp.local". Right? [y] |
|---|
| 164 | What is your domain name? [.local] |
|---|
| 165 | What is your e-mail address? [jd@jd-mbp.local] |
|---|
| 166 | Perl administrator e-mail address [jd@jd-mbp.local] |
|---|
| 167 | Do you want to install only the version-specific parts of perl? [n] |
|---|
| 168 | Where do you keep publicly executable scripts? (~name ok) [/opt/local/bin] |
|---|
| 169 | Pathname where the add-on public executables should be installed? (~name ok) |
|---|
| 170 | [/opt/local/libexec/perl5.12/sitebin] |
|---|
| 171 | Directory /opt/local/libexec/perl5.12/sitebin doesn't exist. Use that name anyway? |
|---|
| 172 | [y] |
|---|
| 173 | Pathname where the site-specific html pages should be installed? (~name ok) |
|---|
| 174 | [none] |
|---|
| 175 | Pathname where the site-specific library html pages should be installed? (~name ok) |
|---|
| 176 | [none] |
|---|
| 177 | Pathname where the site-specific manual pages should be installed? (~name ok) |
|---|
| 178 | [/opt/local/share/perl5.12/siteman/man1] |
|---|
| 179 | Pathname where the site-specific library manual pages should be installed? (~name ok) |
|---|
| 180 | [/opt/local/share/perl5.12/siteman/man3] |
|---|
| 181 | Pathname where add-on public executable scripts should be installed? (~name ok) |
|---|
| 182 | [/opt/local/libexec/perl5.12/sitebin] |
|---|
| 183 | Use the "fast stdio" if available? [n] |
|---|
| 184 | off_t found. |
|---|
| 185 | Checking to see how big your file offsets are... |
|---|
| 186 | fpos_t found. |
|---|
| 187 | Checking the size of fpos_t... |
|---|
| 188 | Pathname for the vendor-supplied executables directory? (~name ok) |
|---|
| 189 | [/opt/local/libexec/perl5.12] |
|---|
| 190 | Pathname for the vendor-supplied html pages? (~name ok) [none] |
|---|
| 191 | Pathname for the vendor-supplied html pages? (~name ok) [none] |
|---|
| 192 | Pathname for the vendor-supplied manual section 1 pages? (~name ok) |
|---|
| 193 | [/opt/local/share/perl5.12/man/man1] |
|---|
| 194 | Pathname for the vendor-supplied manual section 3 pages? (~name ok) |
|---|
| 195 | [/opt/local/share/perl5.12/man/man3] |
|---|
| 196 | Pathname for the vendor-supplied scripts directory? (~name ok) |
|---|
| 197 | [/opt/local/libexec/perl5.12] |
|---|
| 198 | Using <string.h> instead of <strings.h>. |
|---|
| 199 | qgcvt() NOT found. |
|---|
| 200 | Checking how to print long doubles... |
|---|
| 201 | gconvert NOT found. |
|---|
| 202 | gcvt() found. |
|---|
| 203 | sprintf() found. |
|---|
| 204 | I'll use sprintf to convert floats into a string. |
|---|
| 205 | fwalk() NOT found. |
|---|
| 206 | access() found. |
|---|
| 207 | <sys/file.h> defines the *_OK access constants. |
|---|
| 208 | accessx() NOT found. |
|---|
| 209 | aintl() NOT found. |
|---|
| 210 | alarm() found. |
|---|
| 211 | ctime64() NOT found. |
|---|
| 212 | localtime64() NOT found. |
|---|
| 213 | gmtime64() NOT found. |
|---|
| 214 | mktime64() NOT found. |
|---|
| 215 | difftime64() NOT found. |
|---|
| 216 | asctime64() NOT found. |
|---|
| 217 | <pthread.h> found. |
|---|
| 218 | <sys/types.h> found. |
|---|
| 219 | <sys/select.h> found. |
|---|
| 220 | Testing to see if we should include <time.h>, <sys/time.h> or both. |
|---|
| 221 | We'll include <sys/time.h>. |
|---|
| 222 | Checking to see if your struct tm has tm_zone field... |
|---|
| 223 | Checking to see if your struct tm has tm_gmtoff field... |
|---|
| 224 | asctime_r() found. |
|---|
| 225 | atolf() NOT found. |
|---|
| 226 | atoll() found. |
|---|
| 227 | Checking whether your compiler can handle __attribute__((format)) ... |
|---|
| 228 | Checking whether your compiler allows __printf__ format to be null ... |
|---|
| 229 | Checking whether your compiler can handle __attribute__((malloc)) ... |
|---|
| 230 | Checking whether your compiler can handle __attribute__((nonnull(1))) ... |
|---|
| 231 | Checking whether your compiler can handle __attribute__((noreturn)) ... |
|---|
| 232 | Checking whether your compiler can handle __attribute__((pure)) ... |
|---|
| 233 | Checking whether your compiler can handle __attribute__((unused)) ... |
|---|
| 234 | Checking whether your compiler can handle __attribute__((deprecated)) ... |
|---|
| 235 | Checking whether your compiler can handle __attribute__((warn_unused_result)) ... |
|---|
| 236 | bcmp() found. |
|---|
| 237 | bcopy() found. |
|---|
| 238 | getpgrp() found. |
|---|
| 239 | You have to use getpgrp() instead of getpgrp(pid). |
|---|
| 240 | setpgrp() found. |
|---|
| 241 | You have to use setpgrp() instead of setpgrp(pid,pgrp). |
|---|
| 242 | Checking whether your compiler can handle __builtin_choose_expr ... |
|---|
| 243 | Checking whether your compiler can handle __builtin_expect ... |
|---|
| 244 | bzero() found. |
|---|
| 245 | <stdarg.h> found. |
|---|
| 246 | <varargs.h> found. |
|---|
| 247 | We'll include <stdarg.h> to get va_dcl definition. |
|---|
| 248 | You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros. |
|---|
| 249 | You have C99 variadic macros. |
|---|
| 250 | You have void (*signal())(). |
|---|
| 251 | Checking whether your C compiler can cast large floats to int32. |
|---|
| 252 | Checking whether your C compiler can cast negative float to unsigned. |
|---|
| 253 | vprintf() found. |
|---|
| 254 | Your vsprintf() returns (int). |
|---|
| 255 | chown() found. |
|---|
| 256 | chroot() found. |
|---|
| 257 | chsize() NOT found. |
|---|
| 258 | class() NOT found. |
|---|
| 259 | clearenv() NOT found. |
|---|
| 260 | Hmm... Looks like you have Berkeley networking support. |
|---|
| 261 | socketpair() found. |
|---|
| 262 | Checking the availability of certain socket constants... |
|---|
| 263 | <sys/uio.h> found. |
|---|
| 264 | Checking to see if your system supports struct cmsghdr... |
|---|
| 265 | Checking to see if your C compiler knows about "const"... |
|---|
| 266 | copysignl() found. |
|---|
| 267 | crypt() found. |
|---|
| 268 | <crypt.h> NOT found. |
|---|
| 269 | crypt_r() NOT found. |
|---|
| 270 | ctermid() found. |
|---|
| 271 | ctermid_r() found. |
|---|
| 272 | ctime_r() found. |
|---|
| 273 | cuserid() NOT found. |
|---|
| 274 | <limits.h> found. |
|---|
| 275 | <float.h> found. |
|---|
| 276 | DBL_DIG found. |
|---|
| 277 | dbmclose() NOT found. |
|---|
| 278 | difftime() found. |
|---|
| 279 | <dirent.h> found. |
|---|
| 280 | Your directory entries are struct dirent. |
|---|
| 281 | Good, your directory entry keeps length information in d_namlen. |
|---|
| 282 | Checking to see if DIR has a dd_fd member variable |
|---|
| 283 | <sys/dir.h> found. |
|---|
| 284 | <sys/ndir.h> NOT found. |
|---|
| 285 | dirfd() found. |
|---|
| 286 | dlerror() found. |
|---|
| 287 | <dlfcn.h> found. |
|---|
| 288 | What is the extension of dynamically loaded modules [bundle] |
|---|
| 289 | Checking whether your dlsym() needs a leading underscore ... |
|---|
| 290 | dlsym doesn't need a leading underscore. |
|---|
| 291 | drand48_r() NOT found. |
|---|
| 292 | dup2() found. |
|---|
| 293 | eaccess() NOT found. |
|---|
| 294 | endgrent() found. |
|---|
| 295 | <grp.h> found. |
|---|
| 296 | endgrent_r() NOT found. |
|---|
| 297 | endhostent() found. |
|---|
| 298 | <netdb.h> found. |
|---|
| 299 | endhostent_r() NOT found. |
|---|
| 300 | endnetent() found. |
|---|
| 301 | endnetent_r() NOT found. |
|---|
| 302 | endprotoent() found. |
|---|
| 303 | endprotoent_r() NOT found. |
|---|
| 304 | endpwent() found. |
|---|
| 305 | <pwd.h> found. |
|---|
| 306 | endpwent_r() NOT found. |
|---|
| 307 | endservent() found. |
|---|
| 308 | endservent_r() NOT found. |
|---|
| 309 | <sys/file.h> defines the O_* constants... |
|---|
| 310 | and you have the 3 argument form of open(). |
|---|
| 311 | <sys/file.h> found. |
|---|
| 312 | We'll be including <sys/file.h>. |
|---|
| 313 | <fcntl.h> found. |
|---|
| 314 | We don't need to include <fcntl.h> if we include <sys/file.h>. |
|---|
| 315 | fork() found. |
|---|
| 316 | pipe() found. |
|---|
| 317 | Figuring out the flag used by open() for non-blocking I/O... |
|---|
| 318 | Let's see what value errno gets from read() on a O_NONBLOCK file... |
|---|
| 319 | Checking how std your stdio is... |
|---|
| 320 | Checking to see what happens if we set the stdio ptr... |
|---|
| 321 | Increasing ptr in your stdio leaves cnt unchanged. Good. |
|---|
| 322 | You seem to have 'fast stdio' to directly manipulate the stdio buffers. |
|---|
| 323 | fchdir() found. |
|---|
| 324 | fchmod() found. |
|---|
| 325 | fchown() found. |
|---|
| 326 | fcntl() found. |
|---|
| 327 | Well, your system knows about the normal fd_set typedef... |
|---|
| 328 | and you have the normal fd_set macros (just as I'd expect). |
|---|
| 329 | fgetpos() found. |
|---|
| 330 | finite() found. |
|---|
| 331 | finitel() NOT found. |
|---|
| 332 | flock() found. |
|---|
| 333 | fp_class() NOT found. |
|---|
| 334 | pathconf() found. |
|---|
| 335 | fpathconf() found. |
|---|
| 336 | fpclass() NOT found. |
|---|
| 337 | fpclassify() NOT found. |
|---|
| 338 | fpclassl() NOT found. |
|---|
| 339 | Checking to see if you have fpos64_t... |
|---|
| 340 | frexpl() found. |
|---|
| 341 | <sys/param.h> found. |
|---|
| 342 | <sys/mount.h> found. |
|---|
| 343 | Checking to see if your system supports struct fs_data... |
|---|
| 344 | fseeko() found. |
|---|
| 345 | fsetpos() found. |
|---|
| 346 | fstatfs() found. |
|---|
| 347 | statvfs() found. |
|---|
| 348 | fstatvfs() found. |
|---|
| 349 | fsync() found. |
|---|
| 350 | ftello() found. |
|---|
| 351 | Checking if you have a working futimes() |
|---|
| 352 | Yes, you have |
|---|
| 353 | <ndbm.h> found. |
|---|
| 354 | <gdbm/ndbm.h> NOT found. |
|---|
| 355 | <gdbm-ndbm.h> NOT found. |
|---|
| 356 | dbm_open() found. |
|---|
| 357 | Checking if your <ndbm.h> uses prototypes... |
|---|
| 358 | getaddrinfo() found. |
|---|
| 359 | getcwd() found. |
|---|
| 360 | getespwnam() NOT found. |
|---|
| 361 | getfsstat() found. |
|---|
| 362 | getgrent() found. |
|---|
| 363 | getgrent_r() NOT found. |
|---|
| 364 | getgrgid_r() found. |
|---|
| 365 | getgrnam_r() found. |
|---|
| 366 | gethostbyaddr() found. |
|---|
| 367 | gethostbyname() found. |
|---|
| 368 | gethostent() found. |
|---|
| 369 | gethostname() found. |
|---|
| 370 | uname() found. |
|---|
| 371 | Shall I ignore gethostname() from now on? [n] |
|---|
| 372 | gethostbyaddr_r() NOT found. |
|---|
| 373 | gethostbyname_r() NOT found. |
|---|
| 374 | gethostent_r() NOT found. |
|---|
| 375 | getitimer() found. |
|---|
| 376 | getlogin() found. |
|---|
| 377 | getlogin_r() found. |
|---|
| 378 | getmnt() NOT found. |
|---|
| 379 | getmntent() NOT found. |
|---|
| 380 | getnameinfo() found. |
|---|
| 381 | getnetbyaddr() found. |
|---|
| 382 | getnetbyname() found. |
|---|
| 383 | getnetent() found. |
|---|
| 384 | getnetbyaddr_r() NOT found. |
|---|
| 385 | getnetbyname_r() NOT found. |
|---|
| 386 | getnetent_r() NOT found. |
|---|
| 387 | getpagesize() found. |
|---|
| 388 | getprotobyname() found. |
|---|
| 389 | getprotobynumber() found. |
|---|
| 390 | getprotoent() found. |
|---|
| 391 | getpgid() found. |
|---|
| 392 | getpgrp2() NOT found. |
|---|
| 393 | getppid() found. |
|---|
| 394 | getpriority() found. |
|---|
| 395 | getprotobyname_r() NOT found. |
|---|
| 396 | getprotobynumber_r() NOT found. |
|---|
| 397 | getprotoent_r() NOT found. |
|---|
| 398 | getprpwnam() NOT found. |
|---|
| 399 | getpwent() found. |
|---|
| 400 | getpwent_r() NOT found. |
|---|
| 401 | getpwnam_r() found. |
|---|
| 402 | getpwuid_r() found. |
|---|
| 403 | getservbyname() found. |
|---|
| 404 | getservbyport() found. |
|---|
| 405 | getservent() found. |
|---|
| 406 | getservbyname_r() NOT found. |
|---|
| 407 | getservbyport_r() NOT found. |
|---|
| 408 | getservent_r() NOT found. |
|---|
| 409 | getspnam() NOT found. |
|---|
| 410 | <shadow.h> NOT found. |
|---|
| 411 | getspnam_r() NOT found. |
|---|
| 412 | gettimeofday() found. |
|---|
| 413 | gmtime_r() found. |
|---|
| 414 | hasmntopt() NOT found. |
|---|
| 415 | <netinet/in.h> found. |
|---|
| 416 | <arpa/inet.h> found. |
|---|
| 417 | htonl() found. |
|---|
| 418 | ilogbl() found. |
|---|
| 419 | strchr() found. |
|---|
| 420 | inet_aton() found. |
|---|
| 421 | inet_ntop() found. |
|---|
| 422 | inet_pton() found. |
|---|
| 423 | isascii() found. |
|---|
| 424 | isfinite() NOT found. |
|---|
| 425 | isinf() found. |
|---|
| 426 | isnan() found. |
|---|
| 427 | isnanl() NOT found. |
|---|
| 428 | killpg() found. |
|---|
| 429 | lchown() found. |
|---|
| 430 | LDBL_DIG found. |
|---|
| 431 | <math.h> found. |
|---|
| 432 | Checking to see if your libm supports _LIB_VERSION... |
|---|
| 433 | No, it does not (probably harmless) |
|---|
| 434 | link() found. |
|---|
| 435 | localtime_r() found. |
|---|
| 436 | localeconv() found. |
|---|
| 437 | lockf() found. |
|---|
| 438 | lstat() found. |
|---|
| 439 | madvise() found. |
|---|
| 440 | malloc_size() found. |
|---|
| 441 | malloc_good_size() found. |
|---|
| 442 | mblen() found. |
|---|
| 443 | mbstowcs() found. |
|---|
| 444 | mbtowc() found. |
|---|
| 445 | memchr() found. |
|---|
| 446 | memcmp() found. |
|---|
| 447 | memcpy() found. |
|---|
| 448 | memmove() found. |
|---|
| 449 | memset() found. |
|---|
| 450 | mkdir() found. |
|---|
| 451 | mkdtemp() found. |
|---|
| 452 | mkfifo() found. |
|---|
| 453 | mkstemp() found. |
|---|
| 454 | mkstemps() found. |
|---|
| 455 | mktime() found. |
|---|
| 456 | <sys/mman.h> found. |
|---|
| 457 | mmap() found. |
|---|
| 458 | and it returns (void *). |
|---|
| 459 | sqrtl() found. |
|---|
| 460 | scalbnl() found. |
|---|
| 461 | modfl() found. |
|---|
| 462 | Your modfl() seems okay for large values. |
|---|
| 463 | mprotect() found. |
|---|
| 464 | msgctl() found. |
|---|
| 465 | msgget() found. |
|---|
| 466 | msgsnd() found. |
|---|
| 467 | msgrcv() found. |
|---|
| 468 | You have the full msg*(2) library. |
|---|
| 469 | Checking to see if your system supports struct msghdr... |
|---|
| 470 | msync() found. |
|---|
| 471 | munmap() found. |
|---|
| 472 | nice() found. |
|---|
| 473 | <langinfo.h> found. |
|---|
| 474 | nl_langinfo() found. |
|---|
| 475 | Checking to see if your C compiler knows about "volatile"... |
|---|
| 476 | Choosing the C types to be used for Perl's internal types... |
|---|
| 477 | Checking how many bits of your UVs your NVs can preserve... |
|---|
| 478 | Checking to find the largest integer value your NVs can hold... |
|---|
| 479 | The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0 |
|---|
| 480 | Checking whether NV 0.0 is all bits zero in memory... |
|---|
| 481 | 0.0 is represented as all bits zero in memory |
|---|
| 482 | Checking to see if you have off64_t... |
|---|
| 483 | Checking what constant to use for creating joinable pthreads... |
|---|
| 484 | You seem to use PTHREAD_CREATE_JOINABLE. |
|---|
| 485 | pause() found. |
|---|
| 486 | poll() found. |
|---|
| 487 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 488 | the recommended value for $d_poll on this machine was "undef"! |
|---|
| 489 | Keep the recommended value? [y] |
|---|
| 490 | readlink() found. |
|---|
| 491 | vfork() found. |
|---|
| 492 | Do you still want to use vfork()? [y] |
|---|
| 493 | pthread_atfork found. |
|---|
| 494 | pthread_attr_setscope() found. |
|---|
| 495 | sched_yield() found. |
|---|
| 496 | pthread_yield() NOT found. |
|---|
| 497 | random_r() NOT found. |
|---|
| 498 | readdir() found. |
|---|
| 499 | seekdir() found. |
|---|
| 500 | telldir() found. |
|---|
| 501 | rewinddir() found. |
|---|
| 502 | readdir64_r() NOT found. |
|---|
| 503 | readdir_r() found. |
|---|
| 504 | readv() found. |
|---|
| 505 | recvmsg() found. |
|---|
| 506 | rename() found. |
|---|
| 507 | rmdir() found. |
|---|
| 508 | <memory.h> found. |
|---|
| 509 | Checking if your memcmp() can compare relative magnitude... |
|---|
| 510 | select() found. |
|---|
| 511 | semctl() found. |
|---|
| 512 | semget() found. |
|---|
| 513 | semop() found. |
|---|
| 514 | You have the full sem*(2) library. |
|---|
| 515 | You have union semun in <sys/sem.h>. |
|---|
| 516 | You can use union semun for semctl IPC_STAT. |
|---|
| 517 | You can also use struct semid_ds* for semctl IPC_STAT. |
|---|
| 518 | sendmsg() found. |
|---|
| 519 | setegid() found. |
|---|
| 520 | seteuid() found. |
|---|
| 521 | setgrent() found. |
|---|
| 522 | setgrent_r() NOT found. |
|---|
| 523 | sethostent() found. |
|---|
| 524 | sethostent_r() NOT found. |
|---|
| 525 | setitimer() found. |
|---|
| 526 | setlinebuf() found. |
|---|
| 527 | setlocale() found. |
|---|
| 528 | <locale.h> found. |
|---|
| 529 | setlocale_r() NOT found. |
|---|
| 530 | setnetent() found. |
|---|
| 531 | setnetent_r() NOT found. |
|---|
| 532 | setprotoent() found. |
|---|
| 533 | setpgid() found. |
|---|
| 534 | setpgrp2() NOT found. |
|---|
| 535 | setpriority() found. |
|---|
| 536 | setproctitle() NOT found. |
|---|
| 537 | setprotoent_r() NOT found. |
|---|
| 538 | setpwent() found. |
|---|
| 539 | setpwent_r() NOT found. |
|---|
| 540 | setregid() found. |
|---|
| 541 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 542 | the recommended value for $d_setregid on this machine was "undef"! |
|---|
| 543 | Keep the recommended value? [y] |
|---|
| 544 | setresgid() NOT found. |
|---|
| 545 | setreuid() found. |
|---|
| 546 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 547 | the recommended value for $d_setreuid on this machine was "undef"! |
|---|
| 548 | Keep the recommended value? [y] |
|---|
| 549 | setresuid() NOT found. |
|---|
| 550 | setrgid() found. |
|---|
| 551 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 552 | the recommended value for $d_setrgid on this machine was "undef"! |
|---|
| 553 | Keep the recommended value? [y] |
|---|
| 554 | setruid() found. |
|---|
| 555 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 556 | the recommended value for $d_setruid on this machine was "undef"! |
|---|
| 557 | Keep the recommended value? [y] |
|---|
| 558 | setservent() found. |
|---|
| 559 | setservent_r() NOT found. |
|---|
| 560 | setsid() found. |
|---|
| 561 | setvbuf() found. |
|---|
| 562 | <sfio.h> NOT found. |
|---|
| 563 | shmctl() found. |
|---|
| 564 | shmget() found. |
|---|
| 565 | shmat() found. |
|---|
| 566 | and it returns (void *). |
|---|
| 567 | shmdt() found. |
|---|
| 568 | You have the full shm*(2) library. |
|---|
| 569 | sigaction() found. |
|---|
| 570 | <sunmath.h> NOT found. |
|---|
| 571 | Checking to see if you have signbit() available to work on double... Yes. |
|---|
| 572 | sigprocmask() found. |
|---|
| 573 | POSIX sigsetjmp found. |
|---|
| 574 | snprintf() found. |
|---|
| 575 | vsnprintf() found. |
|---|
| 576 | sockatmark() found. |
|---|
| 577 | socks5_init() NOT found. |
|---|
| 578 | Checking whether sprintf returns the length of the string... |
|---|
| 579 | sprintf returns the length of the string (as ANSI says it should) |
|---|
| 580 | srand48_r() NOT found. |
|---|
| 581 | srandom_r() NOT found. |
|---|
| 582 | <sys/stat.h> found. |
|---|
| 583 | Checking to see if your struct stat has st_blocks field... |
|---|
| 584 | <sys/vfs.h> NOT found. |
|---|
| 585 | <sys/statfs.h> NOT found. |
|---|
| 586 | Checking to see if your system supports struct statfs... |
|---|
| 587 | Checking to see if your struct statfs has f_flags field... |
|---|
| 588 | Checking how to access stdio streams by file descriptor number... |
|---|
| 589 | I can't figure out how to access stdio streams by file descriptor number. |
|---|
| 590 | strcoll() found. |
|---|
| 591 | Checking to see if your C compiler can copy structs... |
|---|
| 592 | strerror() found. |
|---|
| 593 | strerror_r() found. |
|---|
| 594 | strftime() found. |
|---|
| 595 | strlcat() found. |
|---|
| 596 | strlcpy() found. |
|---|
| 597 | strtod() found. |
|---|
| 598 | strtol() found. |
|---|
| 599 | strtold() found. |
|---|
| 600 | strtoll() found. |
|---|
| 601 | strtoq() found. |
|---|
| 602 | strtoul() found. |
|---|
| 603 | strtoull() found. |
|---|
| 604 | strtouq() found. |
|---|
| 605 | strxfrm() found. |
|---|
| 606 | symlink() found. |
|---|
| 607 | syscall() found. |
|---|
| 608 | sysconf() found. |
|---|
| 609 | system() found. |
|---|
| 610 | tcgetpgrp() found. |
|---|
| 611 | tcsetpgrp() found. |
|---|
| 612 | time() found. |
|---|
| 613 | time_t found. |
|---|
| 614 | timegm() found. |
|---|
| 615 | <sys/times.h> found. |
|---|
| 616 | times() found. |
|---|
| 617 | clock_t found. |
|---|
| 618 | tmpnam_r() NOT found. |
|---|
| 619 | truncate() found. |
|---|
| 620 | ttyname_r() found. |
|---|
| 621 | tzname[] found. |
|---|
| 622 | (Testing for character data alignment may crash the test. That's okay.) |
|---|
| 623 | It seems that you must access character data in an aligned manner. |
|---|
| 624 | ualarm() found. |
|---|
| 625 | umask() found. |
|---|
| 626 | unordered() NOT found. |
|---|
| 627 | unsetenv() found. |
|---|
| 628 | usleep() found. |
|---|
| 629 | ustat() NOT found. |
|---|
| 630 | closedir() found. |
|---|
| 631 | Checking whether closedir() returns a status... |
|---|
| 632 | wait4() found. |
|---|
| 633 | waitpid() found. |
|---|
| 634 | wcstombs() found. |
|---|
| 635 | wctomb() found. |
|---|
| 636 | writev() found. |
|---|
| 637 | Checking to see how big your characters are (hey, you never know)... |
|---|
| 638 | What is the size of a character (in bytes)? [1] |
|---|
| 639 | Checking how long a character is (in bits)... |
|---|
| 640 | What is the length of a character (in bits)? [8] |
|---|
| 641 | Checking to see how your cpp does stuff like concatenate tokens... |
|---|
| 642 | Oh! Smells like ANSI's been here. |
|---|
| 643 | <db.h> found. |
|---|
| 644 | Checking Berkeley DB version ... |
|---|
| 645 | Looks OK. |
|---|
| 646 | Checking return type needed for hash for Berkeley DB ... |
|---|
| 647 | Checking return type needed for prefix for Berkeley DB ... |
|---|
| 648 | Looking for a random number function... |
|---|
| 649 | Good, found drand48(). |
|---|
| 650 | Use which function to generate random numbers? [drand48] |
|---|
| 651 | Determining whether or not we are on an EBCDIC system... |
|---|
| 652 | Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8. |
|---|
| 653 | Checking how to flush all pending stdio output... |
|---|
| 654 | Your fflush(NULL) works okay for output streams. |
|---|
| 655 | Let's see if it clobbers input pipes... |
|---|
| 656 | fflush(NULL) seems to behave okay with input streams. |
|---|
| 657 | Checking the size of gid_t... |
|---|
| 658 | Checking the sign of gid_t... |
|---|
| 659 | Checking how to print 64-bit integers... |
|---|
| 660 | Checking the format strings to be used for Perl's internal types... |
|---|
| 661 | Checking the format string to be used for gids... |
|---|
| 662 | getgroups() found. |
|---|
| 663 | setgroups() found. |
|---|
| 664 | What type pointer is the second argument to getgroups() and setgroups()? |
|---|
| 665 | [gid_t] |
|---|
| 666 | Build Perl with MAD? [n] |
|---|
| 667 | Checking if your /usr/bin/make program sets $(MAKE)... |
|---|
| 668 | mode_t found. |
|---|
| 669 | It seems that va_copy() or similar will be needed. |
|---|
| 670 | size_t found. |
|---|
| 671 | What is the type for the 1st argument to gethostbyaddr? [char *] |
|---|
| 672 | What is the type for the 2nd argument to gethostbyaddr? [size_t] |
|---|
| 673 | What pager is used on your system? [/usr/bin/less -sR] |
|---|
| 674 | pid_t found. |
|---|
| 675 | Checking how to generate random libraries on your machine... |
|---|
| 676 | <values.h> NOT found. |
|---|
| 677 | Sizeof time_t = 8 |
|---|
| 678 | Your select() operates on 32 bits at a time. |
|---|
| 679 | Generating a list of signal names and numbers... |
|---|
| 680 | Checking the size of size_t... |
|---|
| 681 | Checking to see if you have socklen_t... |
|---|
| 682 | <socks.h> NOT found. |
|---|
| 683 | I'll be using ssize_t for functions returning a byte count. |
|---|
| 684 | Your stdio uses signed chars. |
|---|
| 685 | Checking the size of uid_t... |
|---|
| 686 | Checking the sign of uid_t... |
|---|
| 687 | Checking the format string to be used for uids... |
|---|
| 688 | It appears we'll be able to prototype varargs functions. |
|---|
| 689 | Which compiler compiler (yacc or bison -y) shall I use? [yacc] |
|---|
| 690 | <assert.h> found. |
|---|
| 691 | <fp.h> NOT found. |
|---|
| 692 | <fp_class.h> NOT found. |
|---|
| 693 | <gdbm.h> found. |
|---|
| 694 | gdbm_open() found. |
|---|
| 695 | <ieeefp.h> NOT found. |
|---|
| 696 | <libutil.h> NOT found. |
|---|
| 697 | <mach/cthreads.h> NOT found. |
|---|
| 698 | <mntent.h> NOT found. |
|---|
| 699 | <net/errno.h> NOT found. |
|---|
| 700 | <netinet/tcp.h> found. |
|---|
| 701 | <poll.h> found. |
|---|
| 702 | Hmm. Based on the hints in hints/darwin.sh, |
|---|
| 703 | the recommended value for $i_poll on this machine was "undef"! |
|---|
| 704 | Keep the recommended value? [y] |
|---|
| 705 | <prot.h> NOT found. |
|---|
| 706 | Guessing which symbols your C compiler and preprocessor define... |
|---|
| 707 | tcsetattr() found. |
|---|
| 708 | You have POSIX termios.h... good! |
|---|
| 709 | <stddef.h> found. |
|---|
| 710 | <sys/access.h> NOT found. |
|---|
| 711 | <sys/filio.h> found. |
|---|
| 712 | <sys/ioctl.h> found. |
|---|
| 713 | You have socket ioctls defined in <sys/sockio.h>. |
|---|
| 714 | <syslog.h> found. |
|---|
| 715 | <sys/mode.h> NOT found. |
|---|
| 716 | <sys/poll.h> found. |
|---|
| 717 | <sys/resource.h> found. |
|---|
| 718 | <sys/security.h> NOT found. |
|---|
| 719 | <sys/statvfs.h> found. |
|---|
| 720 | <sys/un.h> found. |
|---|
| 721 | <sys/utsname.h> found. |
|---|
| 722 | <sys/wait.h> found. |
|---|
| 723 | <ustat.h> NOT found. |
|---|
| 724 | <utime.h> found. |
|---|
| 725 | <vfork.h> NOT found. |
|---|
| 726 | Looking for extensions... |
|---|
| 727 | What extensions do you wish to load dynamically? |
|---|
| 728 | [B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Text/Soundex Time/HiRes Time/Piece Unicode/Normalize XS/APItest XS/APItest/KeywordRPN XS/Typemap attributes mro re threads threads/shared] |
|---|
| 729 | What extensions do you wish to load statically? [none] |
|---|
| 730 | Stripping down executable paths... |
|---|
| 731 | Creating config.sh... |
|---|
| 732 | Doing variable substitutions on .SH files... |
|---|
| 733 | Extracting config.h (with variable substitutions) |
|---|
| 734 | Extracting cflags (with variable substitutions) |
|---|
| 735 | Not re-extracting config.h |
|---|
| 736 | Extracting makeaperl (with variable substitutions) |
|---|
| 737 | Extracting makedepend (with variable substitutions) |
|---|
| 738 | Extracting Makefile (with variable substitutions) |
|---|
| 739 | Extracting myconfig (with variable substitutions) |
|---|
| 740 | Extracting pod/Makefile (with variable substitutions) |
|---|
| 741 | Extracting Policy.sh (with variable substitutions) |
|---|
| 742 | Extracting runtests (with variable substitutions) |
|---|
| 743 | Extracting utils/Makefile (with variable substitutions) |
|---|
| 744 | Extracting writemain (with variable substitutions) |
|---|
| 745 | Extracting x2p/cflags (with variable substitutions) |
|---|
| 746 | Extracting x2p/Makefile (with variable substitutions) |
|---|
| 747 | Run make depend now? [y] |
|---|
| 748 | sh ./makedepend MAKE=make |
|---|
| 749 | sh writemain DynaLoader.o > perlmain.c |
|---|
| 750 | rm -f opmini.c |
|---|
| 751 | cp op.c opmini.c |
|---|
| 752 | rm -f perlmini.c |
|---|
| 753 | cp perl.c perlmini.c |
|---|
| 754 | echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c miniperlmain.c perlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist |
|---|
| 755 | Finding dependencies for av.o. |
|---|
| 756 | Finding dependencies for scope.o. |
|---|
| 757 | Finding dependencies for op.o. |
|---|
| 758 | Finding dependencies for doop.o. |
|---|
| 759 | Finding dependencies for doio.o. |
|---|
| 760 | Finding dependencies for dump.o. |
|---|
| 761 | Finding dependencies for gv.o. |
|---|
| 762 | Finding dependencies for hv.o. |
|---|
| 763 | Finding dependencies for mg.o. |
|---|
| 764 | Finding dependencies for reentr.o. |
|---|
| 765 | Finding dependencies for mro.o. |
|---|
| 766 | Finding dependencies for perl.o. |
|---|
| 767 | Finding dependencies for perly.o. |
|---|
| 768 | Finding dependencies for pp.o. |
|---|
| 769 | Finding dependencies for pp_hot.o. |
|---|
| 770 | Finding dependencies for pp_ctl.o. |
|---|
| 771 | Finding dependencies for pp_sys.o. |
|---|
| 772 | Finding dependencies for regcomp.o. |
|---|
| 773 | Finding dependencies for regexec.o. |
|---|
| 774 | Finding dependencies for utf8.o. |
|---|
| 775 | Finding dependencies for sv.o. |
|---|
| 776 | Finding dependencies for taint.o. |
|---|
| 777 | Finding dependencies for toke.o. |
|---|
| 778 | Finding dependencies for util.o. |
|---|
| 779 | Finding dependencies for deb.o. |
|---|
| 780 | Finding dependencies for run.o. |
|---|
| 781 | Finding dependencies for universal.o. |
|---|
| 782 | Finding dependencies for pad.o. |
|---|
| 783 | Finding dependencies for globals.o. |
|---|
| 784 | Finding dependencies for perlio.o. |
|---|
| 785 | Finding dependencies for perlapi.o. |
|---|
| 786 | Finding dependencies for numeric.o. |
|---|
| 787 | Finding dependencies for mathoms.o. |
|---|
| 788 | Finding dependencies for locale.o. |
|---|
| 789 | Finding dependencies for pp_pack.o. |
|---|
| 790 | Finding dependencies for pp_sort.o. |
|---|
| 791 | Finding dependencies for miniperlmain.o. |
|---|
| 792 | Finding dependencies for perlmain.o. |
|---|
| 793 | Finding dependencies for opmini.o. |
|---|
| 794 | Finding dependencies for perlmini.o. |
|---|
| 795 | echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist |
|---|
| 796 | Updating GNUmakefile... |
|---|
| 797 | test -s perlmain.c && touch perlmain.c |
|---|
| 798 | cd x2p; make depend |
|---|
| 799 | sh ../makedepend MAKE=make |
|---|
| 800 | echo hash.c str.c util.c walk.c | tr ' ' '\n' >.clist |
|---|
| 801 | Finding dependencies for hash.o. |
|---|
| 802 | Finding dependencies for str.o. |
|---|
| 803 | Finding dependencies for util.o. |
|---|
| 804 | Finding dependencies for walk.o. |
|---|
| 805 | echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist |
|---|
| 806 | Updating GNUmakefile... |
|---|
| 807 | Now you must run 'make'. |
|---|
| 808 | |
|---|
| 809 | If you compile perl5 on a different machine or from a different object |
|---|
| 810 | directory, copy the Policy.sh file from this object directory to the |
|---|
| 811 | new one before you run Configure -- this will help you with most of |
|---|
| 812 | the policy defaults. |
|---|
| 813 | |
|---|
| 814 | ---> Building perl5.12 |
|---|
| 815 | make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_lang_perl5.12/perl5.12/work/perl-5.12.4' |
|---|
| 816 | `sh cflags "optimize='-O3'" miniperlmain.o` miniperlmain.c |
|---|
| 817 | `sh cflags "optimize='-O3'" gv.o` gv.c |
|---|
| 818 | `sh cflags "optimize='-O3'" toke.o` toke.c |
|---|
| 819 | `sh cflags "optimize='-O3'" perly.o` perly.c |
|---|
| 820 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 821 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 822 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 823 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 824 | `sh cflags "optimize='-O3'" pad.o` pad.c |
|---|
| 825 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 826 | `sh cflags "optimize='-O3'" regcomp.o` regcomp.c |
|---|
| 827 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 828 | `sh cflags "optimize='-O3'" dump.o` dump.c |
|---|
| 829 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 830 | `sh cflags "optimize='-O3'" util.o` util.c |
|---|
| 831 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 832 | `sh cflags "optimize='-O3'" mg.o` mg.c |
|---|
| 833 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 834 | `sh cflags "optimize='-O3'" reentr.o` reentr.c |
|---|
| 835 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 836 | `sh cflags "optimize='-O3'" mro.o` mro.c |
|---|
| 837 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 838 | `sh cflags "optimize='-O3'" hv.o` hv.c |
|---|
| 839 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 840 | `sh cflags "optimize='-O3'" av.o` av.c |
|---|
| 841 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 842 | `sh cflags "optimize='-O3'" run.o` run.c |
|---|
| 843 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 844 | `sh cflags "optimize='-O3'" pp_hot.o` pp_hot.c |
|---|
| 845 | `sh cflags "optimize='-O3'" sv.o` sv.c |
|---|
| 846 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 847 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 848 | `sh cflags "optimize='-O3'" pp.o` pp.c |
|---|
| 849 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 850 | `sh cflags "optimize='-O3'" scope.o` scope.c |
|---|
| 851 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 852 | `sh cflags "optimize='-O3'" pp_ctl.o` pp_ctl.c |
|---|
| 853 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 854 | `sh cflags "optimize='-O3'" pp_sys.o` pp_sys.c |
|---|
| 855 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 856 | `sh cflags "optimize='-O3'" doop.o` doop.c |
|---|
| 857 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 858 | `sh cflags "optimize='-O3'" doio.o` doio.c |
|---|
| 859 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 860 | `sh cflags "optimize='-O3'" regexec.o` regexec.c |
|---|
| 861 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 862 | `sh cflags "optimize='-O3'" utf8.o` utf8.c |
|---|
| 863 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 864 | `sh cflags "optimize='-O3'" taint.o` taint.c |
|---|
| 865 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 866 | `sh cflags "optimize='-O3'" deb.o` deb.c |
|---|
| 867 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 868 | `sh cflags "optimize='-O3'" universal.o` universal.c |
|---|
| 869 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 870 | `sh cflags "optimize='-O3'" generate_uudmap.o` generate_uudmap.c |
|---|
| 871 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 872 | `sh cflags "optimize='-O3'" perlio.o` perlio.c |
|---|
| 873 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 874 | perlio.c: In function 'PerlIOStdio_set_ptrcnt': |
|---|
| 875 | perlio.c:3441: warning: pointer targets in assignment differ in signedness |
|---|
| 876 | `sh cflags "optimize='-O3'" perlapi.o` perlapi.c |
|---|
| 877 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 878 | perlio.c: In function 'PerlIOStdio_set_ptrcnt': |
|---|
| 879 | perlio.c:3441: warning: pointer targets in assignment differ in signedness |
|---|
| 880 | `sh cflags "optimize='-O3'" numeric.o` numeric.c |
|---|
| 881 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 882 | `sh cflags "optimize='-O3'" mathoms.o` mathoms.c |
|---|
| 883 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 884 | `sh cflags "optimize='-O3'" locale.o` locale.c |
|---|
| 885 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 886 | `sh cflags "optimize='-O3'" pp_pack.o` pp_pack.c |
|---|
| 887 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 888 | `sh cflags "optimize='-O3'" pp_sort.o` pp_sort.c |
|---|
| 889 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 890 | `sh cflags "optimize='-O3'" opmini.o` -DPERL_EXTERNAL_GLOB opmini.c |
|---|
| 891 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 892 | `sh cflags "optimize='-O3'" perlmini.o` -DPERL_IS_MINIPERL perlmini.c |
|---|
| 893 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 894 | pp_pack.c: In function 'S_unpack_rec': |
|---|
| 895 | pp_pack.c:1561: warning: 'str' may be used uninitialized in this function |
|---|
| 896 | pp_pack.c:1228: warning: 'sv' may be used uninitialized in this function |
|---|
| 897 | /bin/ln -s perl5124delta.pod pod/perldelta.pod |
|---|
| 898 | cp ext/re/re.pm lib/re.pm |
|---|
| 899 | `sh cflags "optimize='-O3'" perlmain.o` perlmain.c |
|---|
| 900 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 901 | `sh cflags "optimize='-O3'" op.o` op.c |
|---|
| 902 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 903 | pp_pack.c: In function 'S_unpack_rec': |
|---|
| 904 | pp_pack.c:1561: warning: 'str' may be used uninitialized in this function |
|---|
| 905 | pp_pack.c:1228: warning: 'sv' may be used uninitialized in this function |
|---|
| 906 | /usr/bin/gcc-4.2 -o generate_uudmap -L/opt/local/lib -arch x86_64 -arch i386 -fstack-protector generate_uudmap.o -ldl -lm -lutil -lc |
|---|
| 907 | ./generate_uudmap uudmap.h bitcount.h |
|---|
| 908 | `sh cflags "optimize='-O3'" globals.o` globals.c |
|---|
| 909 | CCCMD = /usr/bin/gcc-4.2 -DPERL_CORE -c -pipe -O2 -arch x86_64 -arch i386 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -fstack-protector -I/opt/local/include -O3 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat |
|---|
| 910 | /usr/bin/gcc-4.2 -L/opt/local/lib -arch x86_64 -arch i386 -fstack-protector -force_flat_namespace -o miniperl \ |
|---|
| 911 | gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o \ |
|---|
| 912 | miniperlmain.o opmini.o perlmini.o -ldl -lm -lutil -lc |
|---|
| 913 | ld: in /opt/local/lib/libstdc++.6.dylib, file was built for unsupported file format which is not the architecture being linked (i386) for architecture i386 |
|---|
| 914 | collect2: ld returned 1 exit status |
|---|
| 915 | lipo: can't open input file: /var/tmp//ccNAPIXj.out (No such file or directory) |
|---|
| 916 | make: *** [miniperl] Error 1 |
|---|
| 917 | make: *** Waiting for unfinished jobs.... |
|---|
| 918 | make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_lang_perl5.12/perl5.12/work/perl-5.12.4' |
|---|
| 919 | Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_lang_perl5.12/perl5.12/work/perl-5.12.4" && /usr/bin/make -j4 -w all |
|---|
| 920 | Exit code: 2 |
|---|
| 921 | Warning: targets not executed for perl5.12: org.macports.install org.macports.build org.macports.destroot |
|---|
| 922 | Please see the log file for port perl5.12 for details: |
|---|
| 923 | /opt/local/var/macports/logs/_opt_local_var_macports_sources_svn.macports.org_trunk_dports_lang_perl5.12/perl5.12/main.log |
|---|
| 924 | To report a bug, follow the instructions in the guide: |
|---|
| 925 | http://guide.macports.org/#project.tickets |
|---|
