Ticket #46536: qt5-1.0.tcl

File qt5-1.0.tcl, 12.3 KB (added by RJVB (René Bertin), 10 years ago)
Line 
1# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
2# $Id: qt5-1.0.tcl 113952 2013-11-26 18:01:53Z michaelld@macports.org $
3
4# Copyright (c) 2014 The MacPorts Project
5# All rights reserved.
6#
7# Redistribution and use in source and binary forms, with or without
8# modification, are permitted provided that the following conditions are
9# met:
10#
11# 1. Redistributions of source code must retain the above copyright
12#    notice, this list of conditions and the following disclaimer.
13# 2. Redistributions in binary form must reproduce the above copyright
14#    notice, this list of conditions and the following disclaimer in the
15#    documentation and/or other materials provided with the distribution.
16# 3. Neither the name of Apple Computer, Inc. nor the names of its
17#    contributors may be used to endorse or promote products derived from
18#    this software without specific prior written permission.
19#
20# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31#
32#
33# This portgroup defines standard settings when using Qt5.
34#
35# Usage:
36# PortGroup     qt5 1.0
37
38# no universal binary support in Qt 5
39#     see http://lists.qt-project.org/pipermail/interest/2012-December/005038.html
40#     see also https://bugreports.qt-project.org/browse/QTBUG-24952
41if { ![exists universal_variant] || [option universal_variant] } {
42    PortGroup muniversal 1.0
43    #universal_archs_supported i386 x86_64
44}
45
46# check for +debug variant of this port, and make sure Qt was
47# installed with +debug as well; if not, error out.
48platform darwin {
49    pre-extract {
50        if {[variant_exists debug] && \
51            [variant_isset debug] && \
52           ![info exists building_qt5]} {
53            if {![file exists ${qt_frameworks_dir}/QtCore.framework/QtCore_debug]} {
54                return -code error "\n\nERROR:\n\
55In order to install this port as +debug,
56Qt5 must also be installed with +debug.\n"
57            }
58        }
59    }
60}
61
62variant exclusive description {Builds and installs Qt5-mac the older way, such that other Qt versions can NOT be installed alongside it} {}
63
64# standard Qt5 name
65global qt_name
66set qt_name             qt5
67
68# standard install directory
69    global qt_dir
70    global qt_dir_rel
71# standard Qt documents directory
72    global qt_docs_dir
73# standard Qt plugins directory
74    global qt_plugins_dir
75# standard Qt mkspecs directory
76    global qt_mkspecs_dir
77# standard Qt imports directory
78    global qt_imports_dir
79# standard Qt qml directory
80    global qt_qml_dir
81# standard Qt includes directory
82    global qt_includes_dir
83# standard Qt libraries directory
84    global qt_libs_dir
85# standard Qt libraries directory
86    global qt_frameworks_dir
87    global qt_frameworks_dir_rel
88# standard Qt non-.app executables directory
89    global qt_bins_dir
90# standard Qt data directory
91    global qt_data_dir
92# standard Qt translations directory
93    global qt_translations_dir
94# standard Qt sysconf directory
95    global qt_sysconf_dir
96# standard Qt examples directory
97    global qt_examples_dir
98# standard Qt tests directory
99    global qt_tests_dir
100# standard Qt demos directory
101    global qt_demos_dir
102# standard CMake module directory for Qt-related files
103    global qt_cmake_module_dir
104# standard qmake command location
105    global qt_qmake_cmd
106# standard moc command location
107    global qt_moc_cmd
108# standard uic command location
109    global qt_uic_cmd
110# standard lrelease command location
111    global qt_lrelease_cmd
112
113global qt5_is_concurrent
114if {![variant_isset exclusive]} {
115    # check if we're building qt5 itself
116    if {![info exists building_qt5] || ![info exists name] || ${name} ne "qt5-mac"} {
117        # no, this must be a dependent port: check the qt5 install:
118        if {[file exists ${prefix}/libexec/${qt_name}/bin/qmake]} {
119            # we have a "concurrent" install, which means we must look for the various components
120            # in different locations (esp. qmake)
121            set qt5_is_concurrent   1
122            set auto_concurrent     1
123            ui_msg "NB:\nQt5 has been installed in concurrent mode\n"
124        }
125    } else {
126        # we're building qt5-mac or one of its subports
127        if {![info exists qt5_is_concurrent]} {
128            ui_msg "NB:\nQt5 has been or will be installed in concurrent mode\n"
129        }
130        # we're asking for the standard concurrent install. No need to guess anything, give the user what s/he wants
131        set qt5_is_concurrent   1
132        set auto_concurrent     1
133    }
134}
135
136if {[info exists qt5_is_concurrent]} {
137    set qt_dir              ${prefix}/libexec/${qt_name}
138    set qt_dir_rel          libexec/${qt_name}
139    set qt_docs_dir         ${prefix}/share/doc/${qt_name}
140    set qt_plugins_dir      ${prefix}/share/${qt_name}/plugins
141    set qt_mkspecs_dir      ${prefix}/share/${qt_name}/mkspecs
142    set qt_imports_dir      ${prefix}/share/${qt_name}/imports
143    set qt_qml_dir          ${prefix}/share/${qt_name}/qml
144    set qt_includes_dir     ${prefix}/include/${qt_name}
145    set qt_libs_dir         ${qt_dir}/lib
146    set qt_frameworks_dir   ${qt_dir}/Library/Frameworks
147    set qt_bins_dir         ${qt_dir}/bin
148    set qt_data_dir         ${prefix}/share/${qt_name}
149    set qt_translations_dir ${prefix}/share/${qt_name}/translations
150    set qt_sysconf_dir      ${prefix}/etc/${qt_name}
151    set qt_examples_dir     ${applications_dir}/Qt5/examples
152    set qt_tests_dir        ${prefix}/share/${qt_name}/tests
153    set qt_demos_dir        ${prefix}/share/${qt_name}/demos
154    set qt_cmake_module_dir ${prefix}/lib/cmake
155    set qt_qmake_cmd        ${qt_dir}/bin/qmake
156    set qt_moc_cmd          ${qt_dir}/bin/moc
157    set qt_uic_cmd          ${qt_dir}/bin/uic
158    set qt_lrelease_cmd     ${qt_dir}/bin/lrelease
159} else {
160    set qt_dir              ${prefix}
161    set qt_dir_rel          ""
162    set qt_docs_dir         ${qt_dir}/share/doc/${qt_name}
163    set qt_plugins_dir      ${qt_dir}/share/${qt_name}/plugins
164    set qt_mkspecs_dir      ${qt_dir}/share/${qt_name}/mkspecs
165    set qt_imports_dir      ${qt_dir}/share/${qt_name}/imports
166    set qt_qml_dir          ${qt_dir}/share/${qt_name}/qml
167    set qt_includes_dir     ${qt_dir}/include
168    set qt_libs_dir         ${qt_dir}/lib
169    set qt_frameworks_dir   ${qt_dir}/Library/Frameworks
170    set qt_bins_dir         ${qt_dir}/bin
171    set qt_data_dir         ${qt_dir}/share/${qt_name}
172    set qt_translations_dir ${qt_dir}/share/${qt_name}/translations
173    set qt_sysconf_dir      ${qt_dir}/etc/${qt_name}
174    set qt_examples_dir     ${qt_dir}/share/${qt_name}/examples
175    set qt_tests_dir        ${qt_dir}/share/${qt_name}/tests
176    set qt_demos_dir        ${qt_dir}/share/${qt_name}/demos
177    set qt_cmake_module_dir ${qt_libs_dir}/cmake
178    set qt_qmake_cmd        ${qt_dir}/bin/qmake
179    set qt_moc_cmd          ${qt_dir}/bin/moc
180    set qt_uic_cmd          ${qt_dir}/bin/uic
181    set qt_lrelease_cmd     ${qt_dir}/bin/lrelease
182}
183set qt_frameworks_dir_rel   ${qt_dir_rel}/Library/Frameworks
184
185# standard Qt .app executables directory, if created
186global qt_apps_dir
187set qt_apps_dir         ${applications_dir}/Qt5
188
189# standard qmake spec
190# configure script prefers clang (but "[a]dvertise[s] g++ as an alternative on Lion and below").
191# According to http://qt-project.org/doc/qt-5/supported-platforms.html#reference-configurations,
192#    however, Snow Leopard is only tested on "GCC as provided by Apple"
193# Create a variant for Snow Leopard that uses "-platform macx-g++-32" or "-platform macx-g++"?
194global qt_qmake_spec
195global qt_qmake_spec_32
196global qt_qmake_spec_64
197compiler.whitelist clang
198
199set qt_qmake_spec_32 macx-clang-32
200set qt_qmake_spec_64 macx-clang
201
202if { ![option universal_variant] || ![variant_isset universal] } {
203    if { ${build_arch} eq "i386" } {
204        set qt_qmake_spec ${qt_qmake_spec_32}
205    } else {
206        set qt_qmake_spec ${qt_qmake_spec_64}
207    }
208} else {
209    set qt_qmake_spec ""
210}
211
212# standard PKGCONFIG path
213global qt_pkg_config_dir
214set qt_pkg_config_dir   ${prefix}/lib/pkgconfig
215
216# data used by qmake
217global qt_host_data_dir
218set qt_host_data_dir   ${prefix}/share/${qt_name} 
219
220# standard cmake info for Qt5
221global qt_cmake_defines
222set qt_cmake_defines    \
223    "-DQT_QT_INCLUDE_DIR=${qt_includes_dir} \
224     -DQT_QMAKESPEC=${qt_qmake_spec} \
225     -DQT_ZLIB_LIBRARY=${prefix}/lib/libz.dylib \
226     -DQT_PNG_LIBRARY=${prefix}/lib/libpng.dylib"
227
228# allow for depending on either qt5-mac and qt5-mac-devel, simultaneously
229
230if {![info exists building_qt5]} {
231    if {${os.platform} eq "darwin"} {
232
233        # see if the framework install exists, and if so depend on it;
234        # if not, depend on the library version
235
236        if {[info exists qt5_is_concurrent]} {
237            if {[file exists ${qt_frameworks_dir}/QtCore.framework/QtCore]} {
238                depends_lib-append path:libexec/${qt_name}/Library/Frameworks/QtCore.framework/QtCore:qt5-mac
239            } else {
240                depends_lib-append path:libexec/${qt_name}/lib/libQtCore.5.dylib:qt5-mac
241            }
242        } else {
243            if {[file exists ${qt_frameworks_dir}/QtCore.framework/QtCore]} {
244                depends_lib-append path:Library/Frameworks/QtCore.framework/QtCore:qt5-mac
245            } else {
246                depends_lib-append path:lib/libQtCore.5.dylib:qt5-mac
247            }
248        }
249    }
250}
251
252# standard configure environment, when not building qt5
253
254if {![info exists building_qt5]} {
255    configure.env-append \
256        QTDIR=${qt_dir} \
257        QMAKE=${qt_qmake_cmd} \
258        MOC=${qt_moc_cmd}
259
260    if { ![option universal_variant] || ![variant_isset universal] } {
261        configure.env-append QMAKESPEC=${qt_qmake_spec}
262    } else {
263        set merger_configure_env(i386)   "QMAKESPEC=${qt_qmake_spec_32}"
264        set merger_configure_env(x86_64) "QMAKESPEC=${qt_qmake_spec_64}"
265    }
266
267    # make sure the Qt binaries' directory is in the path, if it is
268    # not the current prefix
269
270    if {${qt_dir} ne ${prefix}} {
271        configure.env-append PATH=${qt_dir}/bin:$env(PATH)
272    }
273} else {
274    configure.env-append QMAKE_NO_DEFAULTS=""
275}
276
277# standard build environment, when not building qt5
278
279if {![info exists building_qt5]} {
280    build.env-append \
281        QTDIR=${qt_dir} \
282        QMAKE=${qt_qmake_cmd} \
283        MOC=${qt_moc_cmd}
284
285    if { ![option universal_variant] || ![variant_isset universal] } {
286        build.env-append QMAKESPEC=${qt_qmake_spec}
287    } else {
288        set merger_build_env(i386)   "QMAKESPEC=${qt_qmake_spec_32}"
289        set merger_build_env(x86_64) "QMAKESPEC=${qt_qmake_spec_64}"
290    }
291
292    # make sure the Qt binaries' directory is in the path, if it is
293    # not the current prefix
294
295    if {${qt_dir} ne ${prefix}} {
296        build.env-append    PATH=${qt_dir}/bin:$env(PATH)
297    }
298}
299
300# use PKGCONFIG for Qt discovery in configure scripts
301depends_build-append    port:pkgconfig
302
303# standard destroot environment
304if { ![option universal_variant] || ![variant_isset universal] } {
305    destroot.env-append \
306        INSTALL_ROOT=${destroot}
307} else {
308    foreach arch ${configure.universal_archs} {
309        lappend merger_destroot_env($arch) INSTALL_ROOT=${workpath}/destroot-${arch}
310    }
311}
312
313# standard destroot environment, when not building qt5
314
315if {![info exists building_qt5]} {
316    destroot.env-append \
317        QTDIR=${qt_dir} \
318        QMAKE=${qt_qmake_cmd} \
319        MOC=${qt_moc_cmd}
320
321    if { ![option universal_variant] || ![variant_isset universal] } {
322        build.env-append QMAKESPEC=${qt_qmake_spec}
323    } else {
324        set destroot_build_env(i386)   "QMAKESPEC=${qt_qmake_spec_32}"
325        set destroot_build_env(x86_64) "QMAKESPEC=${qt_qmake_spec_64}"
326    }
327
328    # make sure the Qt binaries' directory is in the path, if it is
329    # not the current prefix
330
331    if {${qt_dir} ne ${prefix}} {
332        destroot.env-append PATH=${qt_dir}/bin:$env(PATH)
333    }
334}