0 12:29 /Users/mike $ sudo port clean automake ; sudo port -d install automake 
--->  Cleaning automake
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_automake/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake/work
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2  is the latest installed
DEBUG: autoconf 2.64_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1  is the latest installed
DEBUG: help2man 1.36.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
--->  Computing dependencies for automake
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: autoconf
DEBUG: Found Dependency: receipt exists for autoconf
DEBUG: Executing org.macports.main (automake)
--->  Fetching automake
DEBUG: Executing org.macports.fetch (automake)
--->  Verifying checksum(s) for automake
DEBUG: Executing org.macports.checksum (automake)
--->  Checksumming automake-1.11.tar.bz2
DEBUG: Correct (md5) checksum for automake-1.11.tar.bz2
DEBUG: Correct (sha1) checksum for automake-1.11.tar.bz2
DEBUG: Correct (rmd160) checksum for automake-1.11.tar.bz2
DEBUG: setting option extract.cmd to /usr/bin/bzip2
--->  Extracting automake
DEBUG: Executing org.macports.extract (automake)
--->  Extracting automake-1.11.tar.bz2
DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/automake/automake-1.11.tar.bz2
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_automake/work" && /usr/bin/bzip2 -dc /opt/local/var/macports/distfiles/automake/automake-1.11.tar.bz2 | /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (automake)
--->  Configuring automake
DEBUG: Using compiler 'Mac OS X gcc 4.2'
DEBUG: Executing org.macports.configure (automake)
DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' PERL='/opt/local/bin/perl' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_automake/work/automake-1.11" && ./configure --prefix=/opt/local --infodir=/opt/local/share/info'
checking build system type... i386-apple-darwin10.0.0
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... lib/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for perl... /opt/local/bin/perl
checking whether /opt/local/bin/perl supports ithreads... no
checking for tex... no
checking whether autoconf is installed... yes
checking whether autoconf works... yes
checking whether autoconf is recent enough... no
configure: error: Autoconf 2.61a-341 or better is required.
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_automake/work/automake-1.11" && ./configure --prefix=/opt/local --infodir=/opt/local/share/info " returned error 1
Command output: checking build system type... i386-apple-darwin10.0.0
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... lib/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for perl... /opt/local/bin/perl
checking whether /opt/local/bin/perl supports ithreads... no
checking for tex... no
checking whether autoconf is installed... yes
checking whether autoconf works... yes
checking whether autoconf is recent enough... no
configure: error: Autoconf 2.61a-341 or better is required.

DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_automake/work/automake-1.11" && ./configure --prefix=/opt/local --infodir=/opt/local/share/info " returned error 1
Command output: checking build system type... i386-apple-darwin10.0.0
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... lib/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for perl... /opt/local/bin/perl
checking whether /opt/local/bin/perl supports ithreads... no
checking for tex... no
checking whether autoconf is installed... yes
checking whether autoconf works... yes
checking whether autoconf is recent enough... no
configure: error: Autoconf 2.61a-341 or better is required.

    while executing
"$procedure $targetname"
Warning: the following items did not execute (for automake): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

1 12:29 /Users/mike $