G5:~ tim$ sudo time port -d install py25-webkitgtk DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-webkitgtk DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-webkitgtk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port py25-webkitgtk. DEBUG: Requested variant darwin is not provided by port py25-webkitgtk. DEBUG: Requested variant macosx is not provided by port py25-webkitgtk. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python25 2.5.5_0 exists in the ports tree DEBUG: python25 2.5.5_0 +darwin+darwin_8+macosx is the latest installed DEBUG: python25 2.5.5_0 +darwin+darwin_8+macosx is active DEBUG: Merging existing variants darwin darwin_8 macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port python25. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gettext. DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libiconv. DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gperf. DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port ncurses. DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port ncursesw. DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port expat. DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.4_0 exists in the ports tree DEBUG: zlib 1.2.4_0 is the latest installed DEBUG: zlib 1.2.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port zlib. DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.4_0 >= zlib 1.2.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8m_0 exists in the ports tree DEBUG: openssl 0.9.8m_0 +darwin is the latest installed DEBUG: openssl 0.9.8m_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8m_0 >= openssl 0.9.8m_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.8_0 exists in the ports tree DEBUG: tk 8.5.8_0 +darwin is the latest installed DEBUG: tk 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port tk. DEBUG: Requested variant macosx is not provided by port tk. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port pkgconfig. DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.8_0 exists in the ports tree DEBUG: tcl 8.5.8_0 +darwin is the latest installed DEBUG: tcl 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port Xft2. DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xrender. DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 is the latest installed DEBUG: xorg-libX11 1.3.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libX11. DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.6.1_0 exists in the ports tree DEBUG: xorg-util-macros 1.6.1_0 is the latest installed DEBUG: xorg-util-macros 1.6.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-util-macros. DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.6.1_0 >= xorg-util-macros 1.6.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xtrans. DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-bigreqsproto. DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xcmiscproto. DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xextproto. DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-inputproto. DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXdmcp. DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xproto. DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXau. DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-kbproto. DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-renderproto. DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx is the latest installed DEBUG: freetype 2.3.12_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port freetype. DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port fontconfig. DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 is the latest installed DEBUG: xorg-libXext 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXext. DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto. DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.23_0 exists in the ports tree DEBUG: sqlite3 3.6.23_0 +darwin_8 is the latest installed DEBUG: sqlite3 3.6.23_0 +darwin_8 is active DEBUG: Merging existing variants darwin_8 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port sqlite3. DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! sqlite3 3.6.23_0 >= sqlite3 3.6.23_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port db46. DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_2 exists in the ports tree DEBUG: gdbm 1.8.3_2 is the latest installed DEBUG: gdbm 1.8.3_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gdbm. DEBUG: Requested variant darwin is not provided by port gdbm. DEBUG: Requested variant macosx is not provided by port gdbm. DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2 DEBUG: No need to upgrade! python25 2.5.5_0 >= python25 2.5.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-gtk 2.16.0_0 exists in the ports tree DEBUG: py25-gtk 2.16.0_0 is the latest installed DEBUG: py25-gtk 2.16.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-gtk. DEBUG: Requested variant darwin is not provided by port py25-gtk. DEBUG: Requested variant macosx is not provided by port py25-gtk. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: atk 1.28.0_0 exists in the ports tree DEBUG: atk 1.28.0_0 is the latest installed DEBUG: atk 1.28.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port atk. DEBUG: Requested variant darwin is not provided by port atk. DEBUG: Requested variant macosx is not provided by port atk. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk-doc 1.13_0 exists in the ports tree DEBUG: gtk-doc 1.13_0 is the latest installed DEBUG: gtk-doc 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port gtk-doc. DEBUG: Requested variant darwin is not provided by port gtk-doc. DEBUG: Requested variant macosx is not provided by port gtk-doc. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: epoch: in tree: 0 installed: 0 DEBUG: rarian 0.8.1_0 exists in the ports tree DEBUG: rarian 0.8.1_0 is the latest installed DEBUG: rarian 0.8.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port rarian. DEBUG: Requested variant darwin is not provided by port rarian. DEBUG: Requested variant macosx is not provided by port rarian. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: intltool 0.40.6_0 exists in the ports tree DEBUG: intltool 0.40.6_0 is the latest installed DEBUG: intltool 0.40.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port intltool. DEBUG: Requested variant darwin is not provided by port intltool. DEBUG: Requested variant macosx is not provided by port intltool. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-common 2.26.0_0 exists in the ports tree DEBUG: gnome-common 2.26.0_0 is the latest installed DEBUG: gnome-common 2.26.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port gnome-common. DEBUG: Requested variant darwin is not provided by port gnome-common. DEBUG: Requested variant macosx is not provided by port gnome-common. DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: perl5 is *not* installed by MacPorts DEBUG: Searching for dependency: perl5 DEBUG: Didn't find receipt, going to depspec regex for: perl5 DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$ DEBUG: perl5 not installed, soft dependency satisfied DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree DEBUG: p5-xml-parser 2.36_0 is the latest installed DEBUG: p5-xml-parser 2.36_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-xml-parser. DEBUG: Requested variant darwin is not provided by port p5-xml-parser. DEBUG: Requested variant macosx is not provided by port p5-xml-parser. DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-getopt-long 2.38_0 exists in the ports tree DEBUG: p5-getopt-long 2.38_0 is the latest installed DEBUG: p5-getopt-long 2.38_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-getopt-long. DEBUG: Requested variant darwin is not provided by port p5-getopt-long. DEBUG: Requested variant macosx is not provided by port p5-getopt-long. DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-pathtools 3.31_0 exists in the ports tree DEBUG: p5-pathtools 3.31_0 is the latest installed DEBUG: p5-pathtools 3.31_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-pathtools. DEBUG: Requested variant darwin is not provided by port p5-pathtools. DEBUG: Requested variant macosx is not provided by port p5-pathtools. DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-scalar-list-utils 1.23_0 exists in the ports tree DEBUG: p5-scalar-list-utils 1.23_0 is the latest installed DEBUG: p5-scalar-list-utils 1.23_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-scalar-list-utils. DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils. DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils. DEBUG: No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0 DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: getopt 1.1.4_1 exists in the ports tree DEBUG: getopt 1.1.4_1 is the latest installed DEBUG: getopt 1.1.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port getopt. DEBUG: Requested variant darwin is not provided by port getopt. DEBUG: Requested variant macosx is not provided by port getopt. DEBUG: Executing variant darwin_8_powerpc provides darwin_8_powerpc Warning: Skipping upgrade since getopt 1.1.4_1 >= getopt 1.1.4_1, even though installed variants "" do not match "+darwin_8_powerpc". Use 'upgrade --enforce-variants' to switch to the requested variants. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxslt 1.1.26_0 exists in the ports tree DEBUG: libxslt 1.1.26_0 is the latest installed DEBUG: libxslt 1.1.26_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libxslt. DEBUG: Requested variant darwin is not provided by port libxslt. DEBUG: Requested variant macosx is not provided by port libxslt. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.7_0 exists in the ports tree DEBUG: libxml2 2.7.7_0 is the latest installed DEBUG: libxml2 2.7.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port libxml2. DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-doc-utils 0.18.1_0 exists in the ports tree DEBUG: gnome-doc-utils 0.18.1_0 is the latest installed DEBUG: gnome-doc-utils 0.18.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port gnome-doc-utils. DEBUG: Requested variant darwin is not provided by port gnome-doc-utils. DEBUG: Requested variant macosx is not provided by port gnome-doc-utils. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.4_0 exists in the ports tree DEBUG: python26 2.6.4_0 +darwin is the latest installed DEBUG: python26 2.6.4_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port python26. DEBUG: Requested variant macosx is not provided by port python26. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml 5.0_0 exists in the ports tree DEBUG: docbook-xml 5.0_0 is the latest installed DEBUG: docbook-xml 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml. DEBUG: Requested variant darwin is not provided by port docbook-xml. DEBUG: Requested variant macosx is not provided by port docbook-xml. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree DEBUG: docbook-xml-4.1.2 4.1.2_1 is the latest installed DEBUG: docbook-xml-4.1.2 4.1.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xmlcatmgr 2.2_1 exists in the ports tree DEBUG: xmlcatmgr 2.2_1 is the latest installed DEBUG: xmlcatmgr 2.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xmlcatmgr. DEBUG: Requested variant darwin is not provided by port xmlcatmgr. DEBUG: Requested variant macosx is not provided by port xmlcatmgr. DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1 DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree DEBUG: docbook-xml-4.2 4.2_0 is the latest installed DEBUG: docbook-xml-4.2 4.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-4.2. DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2. DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree DEBUG: docbook-xml-4.3 4.3_0 is the latest installed DEBUG: docbook-xml-4.3 4.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-4.3. DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3. DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree DEBUG: docbook-xml-4.4 4.4_0 is the latest installed DEBUG: docbook-xml-4.4 4.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-4.4. DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4. DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree DEBUG: docbook-xml-4.5 4.5_0 is the latest installed DEBUG: docbook-xml-4.5 4.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-4.5. DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5. DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree DEBUG: docbook-xml-5.0 5.0_0 is the latest installed DEBUG: docbook-xml-5.0 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xml-5.0. DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0. DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0. DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0 DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree DEBUG: docbook-xsl 1.75.2_0 is the latest installed DEBUG: docbook-xsl 1.75.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port docbook-xsl. DEBUG: Requested variant darwin is not provided by port docbook-xsl. DEBUG: Requested variant macosx is not provided by port docbook-xsl. DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.14_0 exists in the ports tree DEBUG: iso-codes 3.14_0 is the latest installed DEBUG: iso-codes 3.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port iso-codes. DEBUG: Requested variant darwin is not provided by port iso-codes. DEBUG: Requested variant macosx is not provided by port iso-codes. DEBUG: No need to upgrade! iso-codes 3.14_0 >= iso-codes 3.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-libxml2 2.6.21_0 exists in the ports tree DEBUG: py26-libxml2 2.6.21_0 is the latest installed DEBUG: py26-libxml2 2.6.21_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py26-libxml2. DEBUG: Requested variant darwin is not provided by port py26-libxml2. DEBUG: Requested variant macosx is not provided by port py26-libxml2. DEBUG: No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0 DEBUG: No need to upgrade! gnome-doc-utils 0.18.1_0 >= gnome-doc-utils 0.18.1_0 DEBUG: No need to upgrade! gtk-doc 1.13_0 >= gtk-doc 1.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.22.4_1 exists in the ports tree DEBUG: glib2 2.22.4_1 +darwin is the latest installed DEBUG: glib2 2.22.4_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port glib2. DEBUG: Requested variant macosx is not provided by port glib2. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port autoconf. DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 is the latest installed DEBUG: m4 1.4.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port m4. DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port help2man. DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext. DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port automake. DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin is the latest installed DEBUG: libtool 2.2.6b_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: python_select is *not* installed by MacPorts DEBUG: Searching for dependency: python_select DEBUG: Didn't find receipt, going to depspec regex for: python_select DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$ DEBUG: python_select not installed, soft dependency satisfied DEBUG: No need to upgrade! glib2 2.22.4_1 >= glib2 2.22.4_1 DEBUG: No need to upgrade! atk 1.28.0_0 >= atk 1.28.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk2 2.18.7_1 exists in the ports tree DEBUG: gtk2 2.18.7_1 +darwin_8+x11 is the latest installed DEBUG: gtk2 2.18.7_1 +darwin_8+x11 is active DEBUG: Merging existing variants darwin_8 x11 into variants DEBUG: new fully merged portvariants: x11 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gtk2. DEBUG: Requested variant darwin is not provided by port gtk2. DEBUG: Requested variant macosx is not provided by port gtk2. DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: Executing variant x11 provides x11 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cairo 1.8.10_0 exists in the ports tree DEBUG: cairo 1.8.10_0 +macosx is the latest installed DEBUG: cairo 1.8.10_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port cairo. DEBUG: Requested variant darwin is not provided by port cairo. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpixman 0.16.6_0 exists in the ports tree DEBUG: libpixman 0.16.6_0 is the latest installed DEBUG: libpixman 0.16.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libpixman. DEBUG: Requested variant darwin is not provided by port libpixman. DEBUG: Requested variant macosx is not provided by port libpixman. DEBUG: No need to upgrade! libpixman 0.16.6_0 >= libpixman 0.16.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.42_0 exists in the ports tree DEBUG: libpng 1.2.42_0 is the latest installed DEBUG: libpng 1.2.42_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libpng. DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0 DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8a_0 exists in the ports tree DEBUG: jpeg 8a_0 is the latest installed DEBUG: jpeg 8a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port jpeg. DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.2_3 exists in the ports tree DEBUG: tiff 3.9.2_3 +macosx is the latest installed DEBUG: tiff 3.9.2_3 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port tiff. DEBUG: Requested variant darwin is not provided by port tiff. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jasper 1.900.1_7 exists in the ports tree DEBUG: jasper 1.900.1_7 is the latest installed DEBUG: jasper 1.900.1_7 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port jasper. DEBUG: Requested variant darwin is not provided by port jasper. DEBUG: Requested variant macosx is not provided by port jasper. DEBUG: No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: epoch: in tree: 1 installed: 1 DEBUG: pango 1.24.5_0 exists in the ports tree DEBUG: pango 1.24.5_0 +macosx is the latest installed DEBUG: pango 1.24.5_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port pango. DEBUG: Requested variant darwin is not provided by port pango. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXi 1.3_0 exists in the ports tree DEBUG: xorg-libXi 1.3_0 is the latest installed DEBUG: xorg-libXi 1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXi. DEBUG: Requested variant darwin is not provided by port xorg-libXi. DEBUG: Requested variant macosx is not provided by port xorg-libXi. DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree DEBUG: xorg-libXrandr 1.3.0_1 is the latest installed DEBUG: xorg-libXrandr 1.3.0_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXrandr. DEBUG: Requested variant darwin is not provided by port xorg-libXrandr. DEBUG: Requested variant macosx is not provided by port xorg-libXrandr. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree DEBUG: xorg-randrproto 1.3.1_0 is the latest installed DEBUG: xorg-randrproto 1.3.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-randrproto. DEBUG: Requested variant darwin is not provided by port xorg-randrproto. DEBUG: Requested variant macosx is not provided by port xorg-randrproto. DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree DEBUG: xorg-libXcursor 1.1.10_0 is the latest installed DEBUG: xorg-libXcursor 1.1.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXcursor. DEBUG: Requested variant darwin is not provided by port xorg-libXcursor. DEBUG: Requested variant macosx is not provided by port xorg-libXcursor. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree DEBUG: xorg-fixesproto 4.1.1_0 is the latest installed DEBUG: xorg-fixesproto 4.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-fixesproto. DEBUG: Requested variant darwin is not provided by port xorg-fixesproto. DEBUG: Requested variant macosx is not provided by port xorg-fixesproto. DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfixes 4.0.4_0 exists in the ports tree DEBUG: xorg-libXfixes 4.0.4_0 is the latest installed DEBUG: xorg-libXfixes 4.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXfixes. DEBUG: Requested variant darwin is not provided by port xorg-libXfixes. DEBUG: Requested variant macosx is not provided by port xorg-libXfixes. DEBUG: No need to upgrade! xorg-libXfixes 4.0.4_0 >= xorg-libXfixes 4.0.4_0 DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree DEBUG: xorg-libXinerama 1.1_0 is the latest installed DEBUG: xorg-libXinerama 1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXinerama. DEBUG: Requested variant darwin is not provided by port xorg-libXinerama. DEBUG: Requested variant macosx is not provided by port xorg-libXinerama. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree DEBUG: xorg-xineramaproto 1.2_0 is the latest installed DEBUG: xorg-xineramaproto 1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-xineramaproto. DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto. DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto. DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdamage 1.1.2_0 exists in the ports tree DEBUG: xorg-libXdamage 1.1.2_0 is the latest installed DEBUG: xorg-libXdamage 1.1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXdamage. DEBUG: Requested variant darwin is not provided by port xorg-libXdamage. DEBUG: Requested variant macosx is not provided by port xorg-libXdamage. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree DEBUG: xorg-damageproto 1.2.0_0 is the latest installed DEBUG: xorg-damageproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-damageproto. DEBUG: Requested variant darwin is not provided by port xorg-damageproto. DEBUG: Requested variant macosx is not provided by port xorg-damageproto. DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXdamage 1.1.2_0 >= xorg-libXdamage 1.1.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcomposite 0.4.1_0 exists in the ports tree DEBUG: xorg-libXcomposite 0.4.1_0 is the latest installed DEBUG: xorg-libXcomposite 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port xorg-libXcomposite. DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite. DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-compositeproto 0.4.1_0 exists in the ports tree DEBUG: xorg-compositeproto 0.4.1_0 is the latest installed DEBUG: xorg-compositeproto 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port xorg-compositeproto. DEBUG: Requested variant darwin is not provided by port xorg-compositeproto. DEBUG: Requested variant macosx is not provided by port xorg-compositeproto. DEBUG: No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.1_0 >= xorg-libXcomposite 0.4.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: epoch: in tree: 0 installed: 0 DEBUG: shared-mime-info 0.71_0 exists in the ports tree DEBUG: shared-mime-info 0.71_0 is the latest installed DEBUG: shared-mime-info 0.71_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port shared-mime-info. DEBUG: Requested variant darwin is not provided by port shared-mime-info. DEBUG: Requested variant macosx is not provided by port shared-mime-info. DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 DEBUG: No need to upgrade! gtk2 2.18.7_1 >= gtk2 2.18.7_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libglade2 2.6.4_1 exists in the ports tree DEBUG: libglade2 2.6.4_1 is the latest installed DEBUG: libglade2 2.6.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libglade2. DEBUG: Requested variant darwin is not provided by port libglade2. DEBUG: Requested variant macosx is not provided by port libglade2. DEBUG: No need to upgrade! libglade2 2.6.4_1 >= libglade2 2.6.4_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-cairo 1.8.2_0 exists in the ports tree DEBUG: py25-cairo 1.8.2_0 is the latest installed DEBUG: py25-cairo 1.8.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-cairo. DEBUG: Requested variant darwin is not provided by port py25-cairo. DEBUG: Requested variant macosx is not provided by port py25-cairo. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-numpy 1.4.0_0 exists in the ports tree DEBUG: py25-numpy 1.4.0_0 is the latest installed DEBUG: py25-numpy 1.4.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-numpy. DEBUG: Requested variant darwin is not provided by port py25-numpy. DEBUG: Requested variant macosx is not provided by port py25-numpy. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fftw-3 3.2.2_0 exists in the ports tree DEBUG: fftw-3 3.2.2_0 +powerpc is the latest installed DEBUG: fftw-3 3.2.2_0 +powerpc is active DEBUG: Merging existing variants powerpc into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fftw-3. DEBUG: Requested variant macosx is not provided by port fftw-3. DEBUG: Executing variant powerpc provides powerpc DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-nose 0.11.3_0 exists in the ports tree DEBUG: py25-nose 0.11.3_0 is the latest installed DEBUG: py25-nose 0.11.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-nose. DEBUG: Requested variant darwin is not provided by port py25-nose. DEBUG: Requested variant macosx is not provided by port py25-nose. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-setuptools 0.6c11_0 exists in the ports tree DEBUG: py25-setuptools 0.6c11_0 is the latest installed DEBUG: py25-setuptools 0.6c11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-setuptools. DEBUG: Requested variant darwin is not provided by port py25-setuptools. DEBUG: Requested variant macosx is not provided by port py25-setuptools. DEBUG: No need to upgrade! py25-setuptools 0.6c11_0 >= py25-setuptools 0.6c11_0 DEBUG: No need to upgrade! py25-nose 0.11.3_0 >= py25-nose 0.11.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas DEBUG: epoch: in tree: 0 installed: 0 DEBUG: atlas 3.8.3_1 exists in the ports tree DEBUG: atlas 3.8.3_1 is the latest installed DEBUG: atlas 3.8.3_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port atlas. DEBUG: Requested variant darwin is not provided by port atlas. DEBUG: Requested variant macosx is not provided by port atlas. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gcc43 4.3.4_0 exists in the ports tree DEBUG: gcc43 4.3.4_0 +powerpc is the latest installed DEBUG: gcc43 4.3.4_0 +powerpc is active DEBUG: Merging existing variants powerpc into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gcc43. DEBUG: Requested variant macosx is not provided by port gcc43. DEBUG: Executing variant powerpc provides powerpc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmp 5.0.1_0 exists in the ports tree DEBUG: gmp 5.0.1_0 +powerpc is the latest installed DEBUG: gmp 5.0.1_0 +powerpc is active DEBUG: Merging existing variants powerpc into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gmp. DEBUG: Requested variant macosx is not provided by port gmp. DEBUG: Executing variant powerpc provides powerpc DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree DEBUG: mpfr 2.4.2-p1_0 is the latest installed DEBUG: mpfr 2.4.2-p1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port mpfr. DEBUG: Requested variant darwin is not provided by port mpfr. DEBUG: Requested variant macosx is not provided by port mpfr. DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0 DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gzip 1.4_0 exists in the ports tree DEBUG: gzip 1.4_0 is the latest installed DEBUG: gzip 1.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port gzip. DEBUG: Requested variant darwin is not provided by port gzip. DEBUG: Requested variant macosx is not provided by port gzip. DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0 DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1 DEBUG: No need to upgrade! py25-numpy 1.4.0_0 >= py25-numpy 1.4.0_0 DEBUG: No need to upgrade! py25-cairo 1.8.2_0 >= py25-cairo 1.8.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py25-gobject 2.18.0_0 exists in the ports tree DEBUG: py25-gobject 2.18.0_0 is the latest installed DEBUG: py25-gobject 2.18.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port py25-gobject. DEBUG: Requested variant darwin is not provided by port py25-gobject. DEBUG: Requested variant macosx is not provided by port py25-gobject. DEBUG: No need to upgrade! py25-gobject 2.18.0_0 >= py25-gobject 2.18.0_0 DEBUG: No need to upgrade! py25-gtk 2.16.0_0 >= py25-gtk 2.16.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libffi 3.0.9_0 exists in the ports tree DEBUG: libffi 3.0.9_0 is the latest installed DEBUG: libffi 3.0.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libffi. DEBUG: Requested variant darwin is not provided by port libffi. DEBUG: Requested variant macosx is not provided by port libffi. DEBUG: No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0 ---> Computing dependencies for py25-webkitgtk DEBUG: Searching for dependency: webkit-gtk DEBUG: Didn't find receipt, going to depspec regex for: webkit-gtk DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/webkit-gtk DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/webkit-gtk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port webkit-gtk. DEBUG: Requested variant darwin is not provided by port webkit-gtk. DEBUG: Requested variant macosx is not provided by port webkit-gtk. DEBUG: Searching for dependency: python25 DEBUG: Found Dependency: receipt exists for python25 DEBUG: Searching for dependency: py25-gtk DEBUG: Found Dependency: receipt exists for py25-gtk DEBUG: Searching for dependency: libffi DEBUG: Found Dependency: receipt exists for libffi DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Searching for dependency: libsoup DEBUG: Found Dependency: receipt exists for libsoup DEBUG: Searching for dependency: icu DEBUG: Found Dependency: receipt exists for icu DEBUG: Searching for dependency: libxslt DEBUG: Found Dependency: receipt exists for libxslt DEBUG: Searching for dependency: sqlite3 DEBUG: Found Dependency: receipt exists for sqlite3 DEBUG: Searching for dependency: enchant DEBUG: Found Dependency: receipt exists for enchant DEBUG: Searching for dependency: gst-plugins-base DEBUG: Found Dependency: receipt exists for gst-plugins-base DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: gtk-doc DEBUG: Found Dependency: receipt exists for gtk-doc DEBUG: Executing org.macports.main (webkit-gtk) DEBUG: Skipping completed org.macports.fetch (webkit-gtk) DEBUG: Skipping completed org.macports.checksum (webkit-gtk) DEBUG: Skipping completed org.macports.extract (webkit-gtk) DEBUG: Skipping completed org.macports.patch (webkit-gtk) ---> Configuring webkit-gtk DEBUG: Using compiler 'Mac OS X gcc 4.0' DEBUG: Executing org.macports.configure (webkit-gtk) DEBUG: Environment: CFLAGS='-O2 -arch ppc' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.4' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_webkit-gtk/work/webkit-1.1.15.4" && ./configure --prefix=/opt/local --enable-jit=no' checking build system type... powerpc-apple-darwin8.11.0 checking host system type... powerpc-apple-darwin8.11.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... autotools/install-sh -c -d checking for gawk... gawk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking for native Win32... no checking for style of include used by make... GNU checking for gcc... /usr/bin/gcc-4.0 checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking dependency style of /usr/bin/gcc-4.0... gcc3 checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.0 accepts -g... yes checking dependency style of /usr/bin/g++-4.0... gcc3 checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking if /usr/bin/g++-4.0 supports -fvisibility=hidden -fvisibility-inlines-hidden... yes checking for pkg-config... /opt/local/bin/pkg-config checking for perl... /opt/local/bin/perl checking for bison... /opt/local/bin/bison checking for mv... /bin/mv checking for gcc... (cached) /usr/bin/gcc-4.0 checking whether we are using the GNU C compiler... (cached) yes checking whether /usr/bin/gcc-4.0 accepts -g... (cached) yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... (cached) none needed checking dependency style of /usr/bin/gcc-4.0... (cached) gcc3 checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for working volatile... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by /usr/bin/gcc-4.0... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p checking the name lister (/usr/bin/nm -p) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok checking for dsymutil... dsymutil checking for nmedit... nmedit checking for lipo... lipo checking for otool... otool checking for otool64... otool64 checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... (cached) yes checking whether /usr/bin/g++-4.0 accepts -g... (cached) yes checking dependency style of /usr/bin/g++-4.0... (cached) gcc3 checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E checking for objdir... .libs checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes checking if /usr/bin/gcc-4.0 static flag -static works... no checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes checking whether the /usr/bin/gcc-4.0 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin8.11.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ld used by /usr/bin/g++-4.0... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... no checking whether the /usr/bin/g++-4.0 linker (/usr/bin/ld) supports shared libraries... yes checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common -DPIC checking if /usr/bin/g++-4.0 PIC flag -fno-common -DPIC works... yes checking if /usr/bin/g++-4.0 static flag -static works... no checking if /usr/bin/g++-4.0 supports -c -o file.o... yes checking if /usr/bin/g++-4.0 supports -c -o file.o... (cached) yes checking whether the /usr/bin/g++-4.0 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin8.11.0 dyld checking how to hardcode library paths into programs... immediate checking for bash... /bin/bash checking if dolt supports this host... no, falling back to libtool checking for flex... /opt/local/bin/flex checking for gawk... (cached) gawk checking for gperf... /opt/local/bin/gperf checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for jpeg_destroy_decompress in -ljpeg... yes checking for jpeglib... yes checking for libpng12... yes checking the target windowing system... x11 checking for Hildon UI extensions... no checking for GLIB... yes checking for glib-genmarshal... /opt/local/bin/glib-genmarshal checking for glib-mkenums... /opt/local/bin/glib-mkenums checking which Unicode backend to use... icu checking for LIBXML... yes checking for PANGO... yes checking for ENCHANT... yes checking for GAIL... yes checking for CAIRO... yes checking for GTK... yes checking for XT... no checking for XtOpenDisplay in -lXt... no configure: error: X Toolkit Intrinsics library (libXt) not found Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_webkit-gtk/work/webkit-1.1.15.4" && ./configure --prefix=/opt/local --enable-jit=no " returned error 1 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_www_webkit-gtk/work/webkit-1.1.15.4" && ./configure --prefix=/opt/local --enable-jit=no " returned error 1 while executing "$procedure $targetname" Warning: the following items did not execute (for webkit-gtk): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: webkit-gtk Error: Status 1 encountered during processing. To report a bug, see 41.56 real 15.40 user 13.61 sys G5:~ tim$