version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.7_0 exists in the ports tree
:debug:main ncurses 5.7_0  is the latest installed
:debug:main ncurses 5.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant postgresql84 is not provided by port ncurses.
:debug:main Requested variant no_gcc43 is not provided by port ncurses.
:debug:main Requested variant ipv6 is not provided by port ncurses.
:debug:main Requested variant x11 is not provided by port ncurses.
:debug:main Requested variant postgresql83 is not provided by port ncurses.
:debug:main Requested variant quartz is not provided by port ncurses.
:debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncursesw 5.7_0 exists in the ports tree
:debug:main ncursesw 5.7_0  is the latest installed
:debug:main ncursesw 5.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant postgresql84 is not provided by port ncursesw.
:debug:main Requested variant no_gcc43 is not provided by port ncursesw.
:debug:main Requested variant ipv6 is not provided by port ncursesw.
:debug:main Requested variant x11 is not provided by port ncursesw.
:debug:main Requested variant postgresql83 is not provided by port ncursesw.
:debug:main Requested variant quartz is not provided by port ncursesw.
:debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.3.4_0 exists in the ports tree
:debug:main xorg-libX11 1.3.4_0  is the latest installed
:debug:main xorg-libX11 1.3.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant postgresql84 is not provided by port xorg-libX11.
:debug:main Requested variant no_gcc43 is not provided by port xorg-libX11.
:debug:main Requested variant ipv6 is not provided by port xorg-libX11.
:debug:main Requested variant x11 is not provided by port xorg-libX11.
:debug:main Requested variant postgresql83 is not provided by port xorg-libX11.
:debug:main Requested variant quartz is not provided by port xorg-libX11.
:debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.0.3_0  is the latest installed
:debug:main xorg-libXdmcp 1.0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant postgresql84 is not provided by port xorg-libXdmcp.
:debug:main Requested variant no_gcc43 is not provided by port xorg-libXdmcp.
:debug:main Requested variant ipv6 is not provided by port xorg-libXdmcp.
:debug:main Requested variant x11 is not provided by port xorg-libXdmcp.
:debug:main Requested variant postgresql83 is not provided by port xorg-libXdmcp.
:debug:main Requested variant quartz is not provided by port xorg-libXdmcp.
:debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.5_0 exists in the ports tree
:debug:main xorg-libXau 1.0.5_0  is the latest installed
:debug:main xorg-libXau 1.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant postgresql84 is not provided by port xorg-libXau.
:debug:main Requested variant no_gcc43 is not provided by port xorg-libXau.
:debug:main Requested variant ipv6 is not provided by port xorg-libXau.
:debug:main Requested variant x11 is not provided by port xorg-libXau.
:debug:main Requested variant postgresql83 is not provided by port xorg-libXau.
:debug:main Requested variant quartz is not provided by port xorg-libXau.
:debug:main No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.17_0 exists in the ports tree
:debug:main xorg-xproto 7.0.17_0  is the latest installed
:debug:main xorg-xproto 7.0.17_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant postgresql84 is not provided by port xorg-xproto.
:debug:main Requested variant no_gcc43 is not provided by port xorg-xproto.
:debug:main Requested variant ipv6 is not provided by port xorg-xproto.
:debug:main Requested variant x11 is not provided by port xorg-xproto.
:debug:main Requested variant postgresql83 is not provided by port xorg-xproto.
:debug:main Requested variant quartz is not provided by port xorg-xproto.
:debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.4_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.4_0  is the latest installed
:debug:main xorg-kbproto 1.0.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant postgresql84 is not provided by port xorg-kbproto.
:debug:main Requested variant no_gcc43 is not provided by port xorg-kbproto.
:debug:main Requested variant ipv6 is not provided by port xorg-kbproto.
:debug:main Requested variant x11 is not provided by port xorg-kbproto.
:debug:main Requested variant postgresql83 is not provided by port xorg-kbproto.
:debug:main Requested variant quartz is not provided by port xorg-kbproto.
:debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
:msg:main --->  Computing dependencies for libcaca:msg:main 
:debug:main Searching for dependency: ncurses
:debug:main Found Dependency: receipt exists for ncurses
:debug:main Searching for dependency: xorg-libX11
:debug:main Found Dependency: receipt exists for xorg-libX11
:debug:main Executing org.macports.main (libcaca)
:debug:main Skipping completed org.macports.fetch (libcaca)
:debug:main Skipping completed org.macports.checksum (libcaca)
:debug:main setting option extract.cmd to /usr/bin/bzip2
:debug:main Skipping completed org.macports.extract (libcaca)
:debug:main Skipping completed org.macports.patch (libcaca)
:msg:main --->  Configuring libcaca
:debug:main Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Thu Jun 24 13:57:48 EDT 2010
:debug:configure Executing org.macports.configure (libcaca)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/libcaca-0.9" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --disable-win32 --disable-conio --disable-slang --disable-imlib2 --disable-doc --enable-ncurses --enable-x11'
:info:configure checking build system type... i686-apple-darwin10.4.0
:info:configure checking host system type... i686-apple-darwin10.4.0
:info:configure checking target system type... i686-apple-darwin10.4.0
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for gawk... no
:info:configure checking for mawk... no
:info:configure checking for nawk... no
:info:configure checking for awk... awk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking for style of include used by make... GNU
:info:configure checking for gcc... /usr/bin/gcc-4.2
:info:configure checking for C compiler default output file name... a.out
:info:configure checking whether the C compiler works... yes
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of executables... 
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
:info:configure checking for /usr/bin/gcc-4.2 option to accept ANSI C... none needed
:info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
:info:configure checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together... yes
:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
:info:configure checking for ranlib... ranlib
:info:configure checking for an ANSI C-conforming const... yes
:info:configure checking for inline... inline
:info:configure checking return type of signal handlers... void
:info:configure checking for egrep... grep -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking signal.h usability... yes
:info:configure checking signal.h presence... yes
:info:configure checking for signal.h... yes
:info:configure checking sys/ioctl.h usability... yes
:info:configure checking sys/ioctl.h presence... yes
:info:configure checking for sys/ioctl.h... yes
:info:configure checking sys/time.h usability... yes
:info:configure checking sys/time.h presence... yes
:info:configure checking for sys/time.h... yes
:info:configure checking for inttypes.h... (cached) yes
:info:configure checking endian.h usability... no
:info:configure checking endian.h presence... no
:info:configure checking for endian.h... no
:info:configure checking for unistd.h... (cached) yes
:info:configure checking for signal... yes
:info:configure checking for ioctl... yes
:info:configure checking for vsnprintf... yes
:info:configure checking for getenv... yes
:info:configure checking for putenv... yes
:info:configure checking for strcasecmp... yes
:info:configure checking for usleep... yes
:info:configure checking for gettimeofday... yes
:info:configure checking for Sleep... yes
:info:configure checking for sin in -lm... yes
:info:configure checking for X... libraries , headers 
:info:configure checking for XOpenDisplay in -lX11... no
:info:configure checking X11/XKBlib.h usability... yes
:info:configure checking X11/XKBlib.h presence... yes
:info:configure checking for X11/XKBlib.h... yes
:info:configure configure: error: cannot find X11 development files
:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/libcaca-0.9" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --disable-win32 --disable-conio --disable-slang --disable-imlib2 --disable-doc --enable-ncurses --enable-x11 " returned error 1
:error:configure Target org.macports.configure returned: configure failure: shell command failed
:debug:configure Backtrace: configure failure: shell command failed
    while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for libcaca): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:notice:configure Log for libcaca is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/main.log