Unable to detect PHP version

[jkorchok@…]

I am getting the following when attempting to upgrade php5-oracle: sudo port upgrade php5-oracle Password: ---> Computing dependencies for php5-oracle ---> Configuring php5-oracle Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1 Command output: checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking for Oracle (OCI8) support... yes, shared checking PHP version... Unknown option: n Usage: head [-options] <url>...

-m <method> use method for the request (default is 'HEAD') -f make request even if head believes method is illegal -b <base> Use the specified URL as base -t <timeout> Set timeout value -i <time> Set the If-Modified-Since header on the request -c <conttype> use this content-type for POST, PUT, CHECKIN -a Use text mode for content I/O -p <proxyurl> use this as a proxy -P don't load proxy settings from environment -H <header> send this HTTP header (you can specify several)

-u Display method and URL before any response -U Display request headers (implies -u) -s Display response status code -S Display response status chain -e Display response headers -d Do not display content -o <format> Process HTML content in various ways

-v Show program version -h Print this message

-x Extra debugging output

configure: error: failed to detect PHP version, please report

Error: Unable to upgrade port: 1 Before reporting a bug, first run the command again with the -d flag to get complete output.

I previously ran port clean php5-oracle but it didn't help.

I ran sudo port uninstall php5-oracle then sudo port install php5-oracle and got the same error message.

When I run sudo port -d install php5-oracle I get the following:

DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/php/php5-oracle DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/php/php5-oracle DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/php5extension-1.0.tcl DEBUG: Re-registering default for build.dir DEBUG: Re-registering default for configure.dir DEBUG: Re-registering default for destroot.dir DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port php5-oracle. DEBUG: Requested variant darwin is not provided by port php5-oracle. DEBUG: Requested variant macosx is not provided by port php5-oracle. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: php5 5.3.1_1 exists in the ports tree DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is the latest installed DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is active DEBUG: Merging existing variants apache2 macosx mysql5 oracle into variants DEBUG: new fully merged portvariants: apache2 + oracle + mysql5 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port php5. DEBUG: Requested variant darwin is not provided by port php5. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant apache2 provides apache2 DEBUG: Executing variant mysql5 provides mysql5 DEBUG: Executing variant oracle provides oracle DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port pkgconfig. DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf213 2.13_1 exists in the ports tree DEBUG: autoconf213 2.13_1 is the latest installed DEBUG: autoconf213 2.13_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port autoconf213. DEBUG: Requested variant darwin is not provided by port autoconf213. DEBUG: Requested variant macosx is not provided by port autoconf213. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: perl5 is *not* installed by MacPorts DEBUG: Searching for dependency: perl5 DEBUG: Didn't find receipt, going to depspec regex for: perl5 DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^{perl$ DEBUG: perl5 not installed, soft dependency satisfied DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port m4. DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gawk 3.1.7_0 exists in the ports tree DEBUG: gawk 3.1.7_0 is the latest installed DEBUG: gawk 3.1.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port gawk. DEBUG: Requested variant darwin is not provided by port gawk. DEBUG: Requested variant macosx is not provided by port gawk. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port libiconv. DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gperf. DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gettext. DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port ncurses. DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port ncursesw. DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port expat. DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0 DEBUG: No need to upgrade! autoconf213 2.13_1 >= autoconf213 2.13_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gsed 4.2.1_0 exists in the ports tree DEBUG: gsed 4.2.1_0 +darwin_8 is the latest installed DEBUG: gsed 4.2.1_0 +darwin_8 is active DEBUG: Merging existing variants darwin_8 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port gsed. DEBUG: Requested variant darwin is not provided by port gsed. DEBUG: Requested variant macosx is not provided by port gsed. DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_0 exists in the ports tree DEBUG: libtool 2.2.6b_0 is the latest installed DEBUG: libtool 2.2.6b_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port libtool. DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port automake. DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_0 exists in the ports tree DEBUG: autoconf 2.65_0 is the latest installed DEBUG: autoconf 2.65_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port autoconf. DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port help2man. DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext. DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.6_0 exists in the ports tree DEBUG: libxml2 2.7.6_0 is the latest installed DEBUG: libxml2 2.7.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port libxml2. DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 is the latest installed DEBUG: zlib 1.2.3_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port zlib. DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mhash 0.9.9.9_0 exists in the ports tree DEBUG: mhash 0.9.9.9_0 is the latest installed DEBUG: mhash 0.9.9.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port mhash. DEBUG: Requested variant darwin is not provided by port mhash. DEBUG: Requested variant macosx is not provided by port mhash. DEBUG: No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pcre 7.9_0 exists in the ports tree DEBUG: pcre 7.9_0 is the latest installed DEBUG: pcre 7.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port pcre. DEBUG: Requested variant darwin is not provided by port pcre. DEBUG: Requested variant macosx is not provided by port pcre. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: apache2 2.2.14_0 exists in the ports tree DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is the latest installed DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is active DEBUG: Merging existing variants darwin preforkmpm into variants DEBUG: new fully merged portvariants: preforkmpm + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port apache2. DEBUG: Requested variant macosx is not provided by port apache2. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant preforkmpm provides preforkmpm DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: apr 1.3.9_1 exists in the ports tree DEBUG: apr 1.3.9_1 is the latest installed DEBUG: apr 1.3.9_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port apr. DEBUG: Requested variant darwin is not provided by port apr. DEBUG: Requested variant macosx is not provided by port apr. DEBUG: No need to upgrade! apr 1.3.9_1 >= apr 1.3.9_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util DEBUG: epoch: in tree: 0 installed: 0 DEBUG: apr-util 1.3.9_0 exists in the ports tree DEBUG: apr-util 1.3.9_0 is the latest installed DEBUG: apr-util 1.3.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port apr-util. DEBUG: Requested variant darwin is not provided by port apr-util. DEBUG: Requested variant macosx is not provided by port apr-util. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port db46. DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.22_0 exists in the ports tree DEBUG: sqlite3 3.6.22_0 is the latest installed DEBUG: sqlite3 3.6.22_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant powerpc is not provided by port sqlite3. DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0 DEBUG: No need to upgrade! apr-util 1.3.9_0 >= apr-util 1.3.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8l_0 exists in the ports tree DEBUG: openssl 0.9.8l_0 +darwin is the latest installed DEBUG: openssl 0.9.8l_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant powerpc is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 DEBUG: No need to upgrade! apache2 2.2.14_0 >= apache2 2.2.14_0 DEBUG: No need to upgrade! php5 5.3.1_1 >= php5 5.3.1_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/oracle-instantclient DEBUG: epoch: in tree: 0 installed: 0 DEBUG: oracle-instantclient 10.2.0.4.0_4 exists in the ports tree DEBUG: oracle-instantclient 10.2.0.4.0_4 is the latest installed DEBUG: oracle-instantclient 10.2.0.4.0_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/oracle-instantclient DEBUG: OS Platform: darwin DEBUG: OS Version: 8.11.0 DEBUG: Mac OS X Version: 10.4 DEBUG: System Arch: powerpc DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant powerpc is not provided by port oracle-instantclient. DEBUG: Requested variant darwin is not provided by port oracle-instantclient. DEBUG: Requested variant macosx is not provided by port oracle-instantclient. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex:} unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: No need to upgrade! oracle-instantclient 10.2.0.4.0_4 >= oracle-instantclient 10.2.0.4.0_4 ---> Computing dependencies for php5-oracle DEBUG: Searching for dependency: php5 DEBUG: Found Dependency: receipt exists for php5 DEBUG: Searching for dependency: oracle-instantclient DEBUG: Found Dependency: receipt exists for oracle-instantclient DEBUG: Executing org.macports.main (php5-oracle) DEBUG: Skipping completed org.macports.fetch (php5-oracle) DEBUG: Skipping completed org.macports.checksum (php5-oracle) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (php5-oracle) DEBUG: Skipping completed org.macports.patch (php5-oracle) ---> Configuring php5-oracle DEBUG: Using compiler 'Mac OS X gcc 4.0' DEBUG: Executing proc-pre-org.macports.configure-configure-0 DEBUG: Generating configure script in oci8 Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from... aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from... aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from... aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from... aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from... aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from... aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from... configure.in:150: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from... aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from... configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from... aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from... aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from... configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from... aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from... aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from... aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from... aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from... aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from... aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from... configure.in:150: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from... aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from... configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from... aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from... aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from... DEBUG: Generating configure script in pdo_oci Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from... aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from... config.m4:196: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from... aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from... aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from... aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from... aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from... aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from... configure.in:150: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from... aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from... configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from... aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from... aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from... config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from... aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from... config.m4:196: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from... aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from... aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from... aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from... aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from... aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from... configure.in:150: the top level configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from... aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from... configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from... aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from... aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from... DEBUG: Executing proc-pre-org.macports.configure-configure-1 DEBUG: Executing org.macports.configure (php5-oracle) DEBUG: Configuring in oci8 DEBUG: Environment: CFLAGS='-O2 -arch ppc' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.4' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1' configure: WARNING: unrecognized options: --with-pdo-oci checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /opt/local/bin/gsed checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E checking for icc... no checking for suncc... no checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... no checking build system type... powerpc-apple-darwin8.11.0 checking host system type... powerpc-apple-darwin8.11.0 checking target system type... powerpc-apple-darwin8.11.0 checking for PHP prefix... /opt/local checking for PHP includes... -I/opt/local/include/php -I/opt/local/include/php/main -I/opt/local/include/php/TSRM -I/opt/local/include/php/Zend -I/opt/local/include/php/ext -I/opt/local/include/php/ext/date/lib -I/opt/local/include checking for PHP extension directory... /opt/local/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /opt/local/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking for Oracle (OCI8) support... yes, shared checking PHP version... Unknown option: n Usage: head [-options] <url>...

-m <method> use method for the request (default is 'HEAD') -f make request even if head believes method is illegal -b <base> Use the specified URL as base -t <timeout> Set timeout value -i <time> Set the If-Modified-Since header on the request -c <conttype> use this content-type for POST, PUT, CHECKIN -a Use text mode for content I/O -p <proxyurl> use this as a proxy -P don't load proxy settings from environment -H <header> send this HTTP header (you can specify several)

-u Display method and URL before any response -U Display request headers (implies -u) -s Display response status code -S Display response status chain -e Display response headers -d Do not display content -o <format> Process HTML content in various ways

-v Show program version -h Print this message

-x Extra debugging output

configure: error: failed to detect PHP version, please report Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1

while executing

"$procedure $targetname" Warning: the following items did not execute (for php5-oracle): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>