kdelibs4-experimental 4.4.0_0 Error: Target org.macports.checksum returned: Unable to verify file checksums

[maillists@…]

Get the Unable to verify checksum errors, even if I remove the portfile, and it redownloads it.

here is the backtrace:
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port kdelibs4-experimental.
DEBUG: Requested variant i386 is not provided by port kdelibs4-experimental.
DEBUG: Requested variant macosx is not provided by port kdelibs4-experimental.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: qt4-mac 4.6.2_0 exists in the ports tree
DEBUG: qt4-mac 4.6.2_0 +universal is the latest installed
DEBUG: qt4-mac 4.6.2_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port qt4-mac.
DEBUG: Requested variant i386 is not provided by port qt4-mac.
DEBUG: Requested variant macosx is not provided by port qt4-mac.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 +universal is the latest installed
DEBUG: pkgconfig 0.23_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_4 exists in the ports tree
DEBUG: zlib 1.2.3_4 +universal is the latest installed
DEBUG: zlib 1.2.3_4 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.2.16_1 exists in the ports tree
DEBUG: dbus 1.2.16_1 +universal is the latest installed
DEBUG: dbus 1.2.16_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port dbus.
DEBUG: Requested variant i386 is not provided by port dbus.
DEBUG: Requested variant macosx is not provided by port dbus.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1  is the latest installed
DEBUG: autoconf 2.65_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 +universal is the latest installed
DEBUG: perl5.8 5.8.9_3 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 +universal is the latest installed
DEBUG: m4 1.4.13_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1 +universal is the latest installed
DEBUG: help2man 1.37.1_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2  is the latest installed
DEBUG: p5-locale-gettext 1.05_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 +universal is the latest installed
DEBUG: gettext 0.17_4 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 +universal is the latest installed
DEBUG: libiconv 1.13.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 +universal is the latest installed
DEBUG: gperf 3.0.4_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants darwin_10 universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants darwin_10 universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 +universal is the latest installed
DEBUG: expat 2.0.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0 +universal is the latest installed
DEBUG: automake 1.11.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_1 exists in the ports tree
DEBUG: libtool 2.2.6b_1 +darwin+universal is the latest installed
DEBUG: libtool 2.2.6b_1 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8m_0 exists in the ports tree
DEBUG: openssl 0.9.8m_0 +darwin+universal is the latest installed
DEBUG: openssl 0.9.8m_0 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8m_0 >= openssl 0.9.8m_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.22_0 exists in the ports tree
DEBUG: sqlite3 3.6.22_0 +universal is the latest installed
DEBUG: sqlite3 3.6.22_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin+universal is the latest installed
DEBUG: readline 6.1.000_1 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.2_2 exists in the ports tree
DEBUG: tiff 3.9.2_2 +macosx+universal is the latest installed
DEBUG: tiff 3.9.2_2 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port tiff.
DEBUG: Requested variant i386 is not provided by port tiff.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 7_0 exists in the ports tree
DEBUG: jpeg 7_0 +universal is the latest installed
DEBUG: jpeg 7_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant i386 is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.42_0 exists in the ports tree
DEBUG: libpng 1.2.42_0 +universal is the latest installed
DEBUG: libpng 1.2.42_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant i386 is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmng 1.0.10_1 exists in the ports tree
DEBUG: libmng 1.0.10_1 +universal is the latest installed
DEBUG: libmng 1.0.10_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libmng.
DEBUG: Requested variant i386 is not provided by port libmng.
DEBUG: Requested variant macosx is not provided by port libmng.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lcms 1.19_1 exists in the ports tree
DEBUG: lcms 1.19_1 +universal is the latest installed
DEBUG: lcms 1.19_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port lcms.
DEBUG: Requested variant i386 is not provided by port lcms.
DEBUG: Requested variant macosx is not provided by port lcms.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1
DEBUG: No need to upgrade! libmng 1.0.10_1 >= libmng 1.0.10_1
DEBUG: No need to upgrade! qt4-mac 4.6.2_0 >= qt4-mac 4.6.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: kdelibs4 4.4.1_0 exists in the ports tree
DEBUG: kdelibs4 4.4.1_0 +docs+universal is the latest installed
DEBUG: kdelibs4 4.4.1_0 +docs+universal is active
DEBUG: Merging existing variants docs universal into variants
DEBUG: new fully merged portvariants: universal + docs +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port kdelibs4.
DEBUG: Requested variant i386 is not provided by port kdelibs4.
DEBUG: Requested variant macosx is not provided by port kdelibs4.
DEBUG: Executing variant docs provides docs
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cmake 2.8.0_0 exists in the ports tree
DEBUG: cmake 2.8.0_0 +universal is the latest installed
DEBUG: cmake 2.8.0_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port cmake.
DEBUG: Requested variant i386 is not provided by port cmake.
DEBUG: Requested variant macosx is not provided by port cmake.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidn 1.16_0 exists in the ports tree
DEBUG: libidn 1.16_0 +universal is the latest installed
DEBUG: libidn 1.16_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libidn.
DEBUG: Requested variant i386 is not provided by port libidn.
DEBUG: Requested variant macosx is not provided by port libidn.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0
DEBUG: No need to upgrade! cmake 2.8.0_0 >= cmake 2.8.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automoc 0.9.88_1 exists in the ports tree
DEBUG: automoc 0.9.88_1 +docs+universal is the latest installed
DEBUG: automoc 0.9.88_1 +docs+universal is active
DEBUG: Merging existing variants docs universal into variants
DEBUG: new fully merged portvariants: universal + docs +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automoc.
DEBUG: Requested variant i386 is not provided by port automoc.
DEBUG: Requested variant macosx is not provided by port automoc.
DEBUG: Executing variant docs provides docs
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: doxygen 1.6.2_0 exists in the ports tree
DEBUG: doxygen 1.6.2_0 +darwin is the latest installed
DEBUG: doxygen 1.6.2_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant i386 is not provided by port doxygen.
DEBUG: Requested variant macosx is not provided by port doxygen.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: flex 2.5.35_0 exists in the ports tree
DEBUG: flex 2.5.35_0 +universal is the latest installed
DEBUG: flex 2.5.35_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port flex.
DEBUG: Requested variant i386 is not provided by port flex.
DEBUG: Requested variant macosx is not provided by port flex.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bison 2.4.1_0 exists in the ports tree
DEBUG: bison 2.4.1_0 +universal is the latest installed
DEBUG: bison 2.4.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port bison.
DEBUG: Requested variant i386 is not provided by port bison.
DEBUG: Requested variant macosx is not provided by port bison.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! bison 2.4.1_0 >= bison 2.4.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: coreutils 8.4_0 exists in the ports tree
DEBUG: coreutils 8.4_0 +universal is the latest installed
DEBUG: coreutils 8.4_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port coreutils.
DEBUG: Requested variant i386 is not provided by port coreutils.
DEBUG: Requested variant macosx is not provided by port coreutils.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmp 5.0.1_0 exists in the ports tree
DEBUG: gmp 5.0.1_0 +universal is the latest installed
DEBUG: gmp 5.0.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gmp.
DEBUG: Requested variant i386 is not provided by port gmp.
DEBUG: Requested variant macosx is not provided by port gmp.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: graphviz 2.26.3_0 exists in the ports tree
DEBUG: graphviz 2.26.3_0 +macosx+universal is the latest installed
DEBUG: graphviz 2.26.3_0 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port graphviz.
DEBUG: Requested variant i386 is not provided by port graphviz.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
DEBUG: xorg-libXaw 1.0.7_0 +universal is the latest installed
DEBUG: xorg-libXaw 1.0.7_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: groff 1.20.1_1 exists in the ports tree
DEBUG: groff 1.20.1_1 +universal is the latest installed
DEBUG: groff 1.20.1_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port groff.
DEBUG: Requested variant i386 is not provided by port groff.
DEBUG: Requested variant macosx is not provided by port groff.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
DEBUG: xorg-libsm 1.1.1_0 +universal is the latest installed
DEBUG: xorg-libsm 1.1.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant i386 is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
DEBUG: xorg-xtrans 1.2.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
DEBUG: xorg-libice 1.0.6_0 +universal is the latest installed
DEBUG: xorg-libice 1.0.6_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant i386 is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0  is the latest installed
DEBUG: xorg-xproto 7.0.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0 +universal is the latest installed
DEBUG: xorg-libXext 1.1.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.3_0 +universal is the latest installed
DEBUG: xorg-libX11 1.3.3_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.6.0_0  is the latest installed
DEBUG: xorg-util-macros 1.6.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros 1.6.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
DEBUG: xorg-xextproto 7.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0  is the latest installed
DEBUG: xorg-inputproto 2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 +universal is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed
DEBUG: xorg-libXau 1.0.5_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
DEBUG: xorg-kbproto 1.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXmu 1.0.5_0 +universal is the latest installed
DEBUG: xorg-libXmu 1.0.5_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
DEBUG: xorg-libXt 1.0.7_1 +universal is the latest installed
DEBUG: xorg-libXt 1.0.7_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXt.
DEBUG: Requested variant i386 is not provided by port xorg-libXt.
DEBUG: Requested variant macosx is not provided by port xorg-libXt.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xpm 3.5.8_0 exists in the ports tree
DEBUG: xpm 3.5.8_0 +universal is the latest installed
DEBUG: xpm 3.5.8_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xpm.
DEBUG: Requested variant i386 is not provided by port xpm.
DEBUG: Requested variant macosx is not provided by port xpm.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: pango 1.24.5_0 exists in the ports tree
DEBUG: pango 1.24.5_0 +macosx+universal is the latest installed
DEBUG: pango 1.24.5_0 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port pango.
DEBUG: Requested variant i386 is not provided by port pango.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.22.4_1 exists in the ports tree
DEBUG: glib2 2.22.4_1 +darwin+universal is the latest installed
DEBUG: glib2 2.22.4_1 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port glib2.
DEBUG: Requested variant macosx is not provided by port glib2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
DEBUG: python_select is *not* installed by MacPorts
DEBUG: Searching for dependency: python_select
DEBUG: Didn't find receipt, going to depspec regex for: python_select
DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
DEBUG: python_select not installed, soft dependency satisfied
DEBUG: No need to upgrade! glib2 2.22.4_1 >= glib2 2.22.4_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0 +universal is the latest installed
DEBUG: Xft2 2.1.14_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant i386 is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0 +universal is the latest installed
DEBUG: xrender 0.9.5_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0  is the latest installed
DEBUG: xorg-renderproto 0.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.12_0 exists in the ports tree
DEBUG: freetype 2.3.12_0 +macosx+universal is the latest installed
DEBUG: freetype 2.3.12_0 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx+universal is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Requested variant i386 is not provided by port fontconfig.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cairo 1.8.10_0 exists in the ports tree
DEBUG: cairo 1.8.10_0 +macosx+universal is the latest installed
DEBUG: cairo 1.8.10_0 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port cairo.
DEBUG: Requested variant i386 is not provided by port cairo.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpixman 0.16.6_0 exists in the ports tree
DEBUG: libpixman 0.16.6_0 +universal is the latest installed
DEBUG: libpixman 0.16.6_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpixman.
DEBUG: Requested variant i386 is not provided by port libpixman.
DEBUG: Requested variant macosx is not provided by port libpixman.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libpixman 0.16.6_0 >= libpixman 0.16.6_0
DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0
DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gd2 2.0.35_6 exists in the ports tree
DEBUG: gd2 2.0.35_6 +universal is the latest installed
DEBUG: gd2 2.0.35_6 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gd2.
DEBUG: Requested variant i386 is not provided by port gd2.
DEBUG: Requested variant macosx is not provided by port gd2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gd2 2.0.35_6 >= gd2 2.0.35_6
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ghostscript 8.71_1 exists in the ports tree
DEBUG: ghostscript 8.71_1  is the latest installed
DEBUG: ghostscript 8.71_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port ghostscript.
DEBUG: Requested variant i386 is not provided by port ghostscript.
DEBUG: Requested variant macosx is not provided by port ghostscript.
DEBUG: No need to upgrade! ghostscript 8.71_1 >= ghostscript 8.71_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-fonts
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
DEBUG: urw-fonts 1.0.7pre44_0  is the latest installed
DEBUG: urw-fonts 1.0.7pre44_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-fonts
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port urw-fonts.
DEBUG: Requested variant i386 is not provided by port urw-fonts.
DEBUG: Requested variant macosx is not provided by port urw-fonts.
DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts 1.0.7pre44_0
DEBUG: No need to upgrade! graphviz 2.26.3_0 >= graphviz 2.26.3_0
DEBUG: No need to upgrade! doxygen 1.6.2_0 >= doxygen 1.6.2_0
DEBUG: No need to upgrade! automoc 0.9.88_1 >= automoc 0.9.88_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmake 3.81_0 exists in the ports tree
DEBUG: gmake 3.81_0 +universal is the latest installed
DEBUG: gmake 3.81_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gmake.
DEBUG: Requested variant i386 is not provided by port gmake.
DEBUG: Requested variant macosx is not provided by port gmake.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin+universal is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: soprano 2.4.1_0 exists in the ports tree
DEBUG: soprano 2.4.1_0 +docs+universal is the latest installed
DEBUG: soprano 2.4.1_0 +docs+universal is active
DEBUG: Merging existing variants docs universal into variants
DEBUG: new fully merged portvariants: universal + docs +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port soprano.
DEBUG: Requested variant i386 is not provided by port soprano.
DEBUG: Requested variant macosx is not provided by port soprano.
DEBUG: Executing variant docs provides docs
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: clucene 0.9.21b_0 exists in the ports tree
DEBUG: clucene 0.9.21b_0 +universal is the latest installed
DEBUG: clucene 0.9.21b_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port clucene.
DEBUG: Requested variant i386 is not provided by port clucene.
DEBUG: Requested variant macosx is not provided by port clucene.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: strigi 0.6.3_2 exists in the ports tree
DEBUG: strigi 0.6.3_2 +universal is the latest installed
DEBUG: strigi 0.6.3_2 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port strigi.
DEBUG: Requested variant i386 is not provided by port strigi.
DEBUG: Requested variant macosx is not provided by port strigi.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.6_0 exists in the ports tree
DEBUG: libxml2 2.7.6_0 +universal is the latest installed
DEBUG: libxml2 2.7.6_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant i386 is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
DEBUG: No need to upgrade! strigi 0.6.3_2 >= strigi 0.6.3_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: redland 1.0.10_2 exists in the ports tree
DEBUG: redland 1.0.10_2 +db46+universal is the latest installed
DEBUG: redland 1.0.10_2 +db46+universal is active
DEBUG: Merging existing variants db46 universal into variants
DEBUG: new fully merged portvariants: db46 + universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port redland.
DEBUG: Requested variant i386 is not provided by port redland.
DEBUG: Requested variant macosx is not provided by port redland.
DEBUG: Executing variant db46 provides db46
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl 7.20.0_0 exists in the ports tree
DEBUG: curl 7.20.0_0 +ssl+universal is the latest installed
DEBUG: curl 7.20.0_0 +ssl+universal is active
DEBUG: Merging existing variants ssl universal into variants
DEBUG: new fully merged portvariants: universal + ssl +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port curl.
DEBUG: Requested variant i386 is not provided by port curl.
DEBUG: Requested variant macosx is not provided by port curl.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant ssl provides ssl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl-ca-bundle 7.20.0_0 exists in the ports tree
DEBUG: curl-ca-bundle 7.20.0_0  is the latest installed
DEBUG: curl-ca-bundle 7.20.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
DEBUG: No need to upgrade! curl-ca-bundle 7.20.0_0 >= curl-ca-bundle 7.20.0_0
DEBUG: No need to upgrade! curl 7.20.0_0 >= curl 7.20.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.26_0 exists in the ports tree
DEBUG: libxslt 1.1.26_0 +universal is the latest installed
DEBUG: libxslt 1.1.26_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxslt.
DEBUG: Requested variant i386 is not provided by port libxslt.
DEBUG: Requested variant macosx is not provided by port libxslt.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
DEBUG: mpfr 2.4.2-p1_0 +universal is the latest installed
DEBUG: mpfr 2.4.2-p1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port mpfr.
DEBUG: Requested variant i386 is not provided by port mpfr.
DEBUG: Requested variant macosx is not provided by port mpfr.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: raptor 1.4.21_0 exists in the ports tree
DEBUG: raptor 1.4.21_0 +universal is the latest installed
DEBUG: raptor 1.4.21_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port raptor.
DEBUG: Requested variant i386 is not provided by port raptor.
DEBUG: Requested variant macosx is not provided by port raptor.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! raptor 1.4.21_0 >= raptor 1.4.21_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: rasqal 0.9.19_0 exists in the ports tree
DEBUG: rasqal 0.9.19_0 +universal is the latest installed
DEBUG: rasqal 0.9.19_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port rasqal.
DEBUG: Requested variant i386 is not provided by port rasqal.
DEBUG: Requested variant macosx is not provided by port rasqal.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! rasqal 0.9.19_0 >= rasqal 0.9.19_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6 +universal is the latest installed
DEBUG: db46 4.6.21_6 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port db46.
DEBUG: Requested variant i386 is not provided by port db46.
DEBUG: Requested variant macosx is not provided by port db46.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: No need to upgrade! redland 1.0.10_2 >= redland 1.0.10_2
DEBUG: No need to upgrade! soprano 2.4.1_0 >= soprano 2.4.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cyrus-sasl2 2.1.23_1 exists in the ports tree
DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is the latest installed
DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is active
DEBUG: Merging existing variants kerberos universal into variants
DEBUG: new fully merged portvariants: universal + kerberos +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port cyrus-sasl2.
DEBUG: Requested variant i386 is not provided by port cyrus-sasl2.
DEBUG: Requested variant macosx is not provided by port cyrus-sasl2.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant kerberos provides kerberos
DEBUG: No need to upgrade! cyrus-sasl2 2.1.23_1 >= cyrus-sasl2 2.1.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pcre 7.9_0 exists in the ports tree
DEBUG: pcre 7.9_0 +universal is the latest installed
DEBUG: pcre 7.9_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port pcre.
DEBUG: Requested variant i386 is not provided by port pcre.
DEBUG: Requested variant macosx is not provided by port pcre.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: shared-mime-info 0.71_0 exists in the ports tree
DEBUG: shared-mime-info 0.71_0 +universal is the latest installed
DEBUG: shared-mime-info 0.71_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port shared-mime-info.
DEBUG: Requested variant i386 is not provided by port shared-mime-info.
DEBUG: Requested variant macosx is not provided by port shared-mime-info.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
DEBUG: p5-xml-parser 2.36_0  is the latest installed
DEBUG: p5-xml-parser 2.36_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: intltool 0.40.6_0 exists in the ports tree
DEBUG: intltool 0.40.6_0  is the latest installed
DEBUG: intltool 0.40.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port intltool.
DEBUG: Requested variant i386 is not provided by port intltool.
DEBUG: Requested variant macosx is not provided by port intltool.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-common 2.26.0_0 exists in the ports tree
DEBUG: gnome-common 2.26.0_0  is the latest installed
DEBUG: gnome-common 2.26.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-common.
DEBUG: Requested variant i386 is not provided by port gnome-common.
DEBUG: Requested variant macosx is not provided by port gnome-common.
DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-getopt-long 2.38_0 exists in the ports tree
DEBUG: p5-getopt-long 2.38_0  is the latest installed
DEBUG: p5-getopt-long 2.38_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-getopt-long.
DEBUG: Requested variant i386 is not provided by port p5-getopt-long.
DEBUG: Requested variant macosx is not provided by port p5-getopt-long.
DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-pathtools 3.31_0 exists in the ports tree
DEBUG: p5-pathtools 3.31_0  is the latest installed
DEBUG: p5-pathtools 3.31_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-pathtools.
DEBUG: Requested variant i386 is not provided by port p5-pathtools.
DEBUG: Requested variant macosx is not provided by port p5-pathtools.
DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-scalar-list-utils 1.22_0 exists in the ports tree
DEBUG: p5-scalar-list-utils 1.22_0  is the latest installed
DEBUG: p5-scalar-list-utils 1.22_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils.
DEBUG: Requested variant i386 is not provided by port p5-scalar-list-utils.
DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils.
DEBUG: No need to upgrade! p5-scalar-list-utils 1.22_0 >= p5-scalar-list-utils 1.22_0
DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0
DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: giflib 4.1.6_1 exists in the ports tree
DEBUG: giflib 4.1.6_1 +universal is the latest installed
DEBUG: giflib 4.1.6_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port giflib.
DEBUG: Requested variant i386 is not provided by port giflib.
DEBUG: Requested variant macosx is not provided by port giflib.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jasper 1.900.1_6 exists in the ports tree
DEBUG: jasper 1.900.1_6 +universal is the latest installed
DEBUG: jasper 1.900.1_6 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port jasper.
DEBUG: Requested variant i386 is not provided by port jasper.
DEBUG: Requested variant macosx is not provided by port jasper.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
DEBUG: unzip is *not* installed by MacPorts
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: unzip not installed, soft dependency satisfied
DEBUG: No need to upgrade! jasper 1.900.1_6 >= jasper 1.900.1_6
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: openexr 1.6.1_1 exists in the ports tree
DEBUG: openexr 1.6.1_1 +universal is the latest installed
DEBUG: openexr 1.6.1_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port openexr.
DEBUG: Requested variant i386 is not provided by port openexr.
DEBUG: Requested variant macosx is not provided by port openexr.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ilmbase 1.0.1_2 exists in the ports tree
DEBUG: ilmbase 1.0.1_2 +universal is the latest installed
DEBUG: ilmbase 1.0.1_2 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port ilmbase.
DEBUG: Requested variant i386 is not provided by port ilmbase.
DEBUG: Requested variant macosx is not provided by port ilmbase.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gsed 4.2.1_0 exists in the ports tree
DEBUG: gsed 4.2.1_0 +universal is the latest installed
DEBUG: gsed 4.2.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gsed.
DEBUG: Requested variant i386 is not provided by port gsed.
DEBUG: Requested variant macosx is not provided by port gsed.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
DEBUG: libart_lgpl 2.3.20_0 +universal is the latest installed
DEBUG: libart_lgpl 2.3.20_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libart_lgpl.
DEBUG: Requested variant i386 is not provided by port libart_lgpl.
DEBUG: Requested variant macosx is not provided by port libart_lgpl.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: enchant 1.5.0_1 exists in the ports tree
DEBUG: enchant 1.5.0_1 +universal is the latest installed
DEBUG: enchant 1.5.0_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port enchant.
DEBUG: Requested variant i386 is not provided by port enchant.
DEBUG: Requested variant macosx is not provided by port enchant.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: aspell 0.60.6_2 exists in the ports tree
DEBUG: aspell 0.60.6_2 +macosx+universal is the latest installed
DEBUG: aspell 0.60.6_2 +macosx+universal is active
DEBUG: Merging existing variants macosx universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port aspell.
DEBUG: Requested variant i386 is not provided by port aspell.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: texinfo 4.13_0 exists in the ports tree
DEBUG: texinfo 4.13_0 +universal is the latest installed
DEBUG: texinfo 4.13_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port texinfo.
DEBUG: Requested variant i386 is not provided by port texinfo.
DEBUG: Requested variant macosx is not provided by port texinfo.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lzmautils 4.32.7_1 exists in the ports tree
DEBUG: lzmautils 4.32.7_1 +universal is the latest installed
DEBUG: lzmautils 4.32.7_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port lzmautils.
DEBUG: Requested variant i386 is not provided by port lzmautils.
DEBUG: Requested variant macosx is not provided by port lzmautils.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hunspell 1.2.8_1 exists in the ports tree
DEBUG: hunspell 1.2.8_1 +universal is the latest installed
DEBUG: hunspell 1.2.8_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port hunspell.
DEBUG: Requested variant i386 is not provided by port hunspell.
DEBUG: Requested variant macosx is not provided by port hunspell.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! hunspell 1.2.8_1 >= hunspell 1.2.8_1
DEBUG: No need to upgrade! enchant 1.5.0_1 >= enchant 1.5.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell-dict-en
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: aspell-dict-en 6.0_0 exists in the ports tree
DEBUG: aspell-dict-en 6.0_0  is the latest installed
DEBUG: aspell-dict-en 6.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell-dict-en
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port aspell-dict-en.
DEBUG: Requested variant i386 is not provided by port aspell-dict-en.
DEBUG: Requested variant macosx is not provided by port aspell-dict-en.
DEBUG: No need to upgrade! aspell-dict-en 6.0_0 >= aspell-dict-en 6.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: attica 0.1.2_0 exists in the ports tree
DEBUG: attica 0.1.2_0 +docs+universal is the latest installed
DEBUG: attica 0.1.2_0 +docs+universal is active
DEBUG: Merging existing variants docs universal into variants
DEBUG: new fully merged portvariants: universal + docs +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port attica.
DEBUG: Requested variant i386 is not provided by port attica.
DEBUG: Requested variant macosx is not provided by port attica.
DEBUG: Executing variant docs provides docs
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! attica 0.1.2_0 >= attica 0.1.2_0
DEBUG: No need to upgrade! kdelibs4 4.4.1_0 >= kdelibs4 4.4.1_0
--->  Computing dependencies for kdelibs4-experimental
DEBUG: Searching for dependency: qt4-mac
DEBUG: Found Dependency: receipt exists for qt4-mac
DEBUG: Searching for dependency: kdelibs4
DEBUG: Found Dependency: receipt exists for kdelibs4
DEBUG: Searching for dependency: cmake
DEBUG: Found Dependency: receipt exists for cmake
DEBUG: Searching for dependency: automoc
DEBUG: Found Dependency: receipt exists for automoc
DEBUG: Executing org.macports.main (kdelibs4-experimental)
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdelibs4-experimental/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental/work
--->  Fetching kdelibs4-experimental
DEBUG: Executing org.macports.fetch (kdelibs4-experimental)
--->  Verifying checksum(s) for kdelibs4-experimental
DEBUG: Executing org.macports.checksum (kdelibs4-experimental)
--->  Checksumming kdelibs-experimental-4.4.0.tar.bz2
Error: Checksum (md5) mismatch for kdelibs-experimental-4.4.0.tar.bz2
Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5 5b6bf1e49f2e18ffcd844392928ad30e
Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5 31fac25a746d2f9d318c5a37c938423e
Error: Checksum (sha1) mismatch for kdelibs-experimental-4.4.0.tar.bz2
Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1 05936c4d3e0df7f135e9a1a4f430c2e9555d9b6e
Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1 a9a77d8dba9bf7b564af6d06d6dd98de993f505a
Error: Checksum (rmd160) mismatch for kdelibs-experimental-4.4.0.tar.bz2
Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160 91cc4574fd48d96ee14e7197f71768dacc2f8909
Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160 9405166b0d27727818aa34c293473611959b5819
The correct checksum line may be:
checksums           md5     31fac25a746d2f9d318c5a37c938423e \
                    sha1    a9a77d8dba9bf7b564af6d06d6dd98de993f505a \
                    rmd160  9405166b0d27727818aa34c293473611959b5819
Error: Target org.macports.checksum returned: Unable to verify file checksums
DEBUG: Backtrace: Unable to verify file checksums
    while executing
"$procedure $targetname"
Warning: the following items did not execute (for kdelibs4-experimental): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>