cannot install xorg-libXp

[pavlo72@…]

Hello,

I am trying to install xorg-libXp using macports 1.9.1 under snow leopard 6.4.3 and I get the following log file. I use the latest autoconf 2.66_2. I also tried the +universal version and got similar problems.

Thanks for your help.

version:1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean pkgconfig 0.25_0 exists in the ports tree :debug:clean pkgconfig 0.25_0 is the latest installed :debug:clean pkgconfig 0.25_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-util-macros 1.9.0_0 exists in the ports tree :debug:clean xorg-util-macros 1.9.0_0 is the latest installed :debug:clean xorg-util-macros 1.9.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-util-macros. :debug:clean No need to upgrade! xorg-util-macros 1.9.0_0 >= xorg-util-macros 1.9.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean autoconf 2.66_2 exists in the ports tree :debug:clean autoconf 2.66_2 is the latest installed :debug:clean autoconf 2.66_2 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port autoconf. :debug:clean No need to upgrade! autoconf 2.66_2 >= autoconf 2.66_2 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean perl5 5.8.9_0 exists in the ports tree :debug:clean perl5 5.8.9_0 is the latest installed :debug:clean perl5 5.8.9_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean universal_variant is false, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port perl5. :debug:clean No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean perl5.8 5.8.9_3 exists in the ports tree :debug:clean perl5.8 5.8.9_3 is the latest installed :debug:clean perl5.8 5.8.9_3 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean m4 1.4.14_0 exists in the ports tree :debug:clean m4 1.4.14_0 is the latest installed :debug:clean m4 1.4.14_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean help2man 1.38.2_0 exists in the ports tree :debug:clean help2man 1.38.2_0 is the latest installed :debug:clean help2man 1.38.2_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! help2man 1.38.2_0 >= help2man 1.38.2_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean p5-locale-gettext 1.05_2 exists in the ports tree :debug:clean p5-locale-gettext 1.05_2 is the latest installed :debug:clean p5-locale-gettext 1.05_2 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:clean Re-registering default for configure.universal_args :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gettext 0.18.1.1_0 exists in the ports tree :debug:clean gettext 0.18.1.1_0 is the latest installed :debug:clean gettext 0.18.1.1_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libiconv 1.13.1_0 exists in the ports tree :debug:clean libiconv 1.13.1_0 is the latest installed :debug:clean libiconv 1.13.1_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncurses 5.7_0 exists in the ports tree :debug:clean ncurses 5.7_0 is the latest installed :debug:clean ncurses 5.7_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncursesw 5.7_0 exists in the ports tree :debug:clean ncursesw 5.7_0 is the latest installed :debug:clean ncursesw 5.7_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean expat 2.0.1_0 exists in the ports tree :debug:clean expat 2.0.1_0 is the latest installed :debug:clean expat 2.0.1_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean automake 1.11.1_0 exists in the ports tree :debug:clean automake 1.11.1_0 is the latest installed :debug:clean automake 1.11.1_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port automake. :debug:clean No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libtool 2.2.10_0 exists in the ports tree :debug:clean libtool 2.2.10_0 is the latest installed :debug:clean libtool 2.2.10_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! libtool 2.2.10_0 >= libtool 2.2.10_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXext 1.1.2_0 exists in the ports tree :debug:clean xorg-libXext 1.1.2_0 is the latest installed :debug:clean xorg-libXext 1.1.2_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libX11 1.3.4_0 exists in the ports tree :debug:clean xorg-libX11 1.3.4_0 is the latest installed :debug:clean xorg-libX11 1.3.4_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXdmcp 1.0.3_0 exists in the ports tree :debug:clean xorg-libXdmcp 1.0.3_0 is the latest installed :debug:clean xorg-libXdmcp 1.0.3_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXau 1.0.5_0 exists in the ports tree :debug:clean xorg-libXau 1.0.5_0 is the latest installed :debug:clean xorg-libXau 1.0.5_0 +universal is active :debug:clean Merging existing variants '+universal' into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Executing variant universal provides universal :debug:clean No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xproto 7.0.17_0 exists in the ports tree :debug:clean xorg-xproto 7.0.17_0 is the latest installed :debug:clean xorg-xproto 7.0.17_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-xproto. :debug:clean No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-kbproto 1.0.4_0 exists in the ports tree :debug:clean xorg-kbproto 1.0.4_0 is the latest installed :debug:clean xorg-kbproto 1.0.4_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-kbproto. :debug:clean No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xextproto 7.1.1_0 exists in the ports tree :debug:clean xorg-xextproto 7.1.1_0 is the latest installed :debug:clean xorg-xextproto 7.1.1_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-xextproto. :debug:clean No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-printproto 1.0.4_0 exists in the ports tree :debug:clean xorg-printproto 1.0.4_0 is the latest installed :debug:clean xorg-printproto 1.0.4_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-printproto. :debug:clean No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-printproto 1.0.4_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:clean xorg-libpthread-stubs 0.3_0 is the latest installed :debug:clean xorg-libpthread-stubs 0.3_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: universal + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Requested variant universal is not provided by port xorg-libpthread-stubs. :debug:clean No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :msg:clean ---> Computing dependencies for xorg-libXp:info:clean .:debug:clean Searching for dependency: pkgconfig :debug:clean Found Dependency: receipt exists for pkgconfig :debug:clean Searching for dependency: xorg-util-macros :debug:clean Found Dependency: receipt exists for xorg-util-macros :debug:clean Searching for dependency: autoconf :debug:clean Found Dependency: receipt exists for autoconf :debug:clean Searching for dependency: automake :debug:clean Found Dependency: receipt exists for automake :debug:clean Searching for dependency: libtool :debug:clean Found Dependency: receipt exists for libtool :debug:clean Searching for dependency: xorg-libXext :debug:clean Found Dependency: receipt exists for xorg-libXext :debug:clean Searching for dependency: xorg-printproto :debug:clean Found Dependency: receipt exists for xorg-printproto :debug:clean Searching for dependency: xorg-libpthread-stubs :debug:clean Found Dependency: receipt exists for xorg-libpthread-stubs :msg:clean :debug:main Executing org.macports.main (xorg-libXp) :debug:main Skipping completed org.macports.fetch (xorg-libXp) :debug:main Skipping completed org.macports.checksum (xorg-libXp) :debug:main setting option extract.cmd to /usr/bin/bzip2 :debug:main Skipping completed org.macports.extract (xorg-libXp) :debug:main Skipping completed org.macports.patch (xorg-libXp) :msg:main ---> Configuring xorg-libXp :debug:main Using compiler 'Mac OS X gcc 4.2' :debug:configure configure phase started at Sun Jul 4 20:23:11 EDT 2010 :debug:configure Executing org.macports.configure (xorg-libXp) :debug:configure Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXp/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf --install -fvi' :info:configure autoreconf: Entering directory `.' :info:configure autoreconf: configure.ac: not using Gettext :info:configure autoreconf: running: aclocal --force :info:configure configure.ac:28: warning: AC_INIT: not a literal: ​https://bugs.freedesktop.org/enter_bug.cgi?product=xorg :info:configure autoreconf: configure.ac: tracing :info:configure configure.ac:28: warning: AC_INIT: not a literal: ​https://bugs.freedesktop.org/enter_bug.cgi?product=xorg :info:configure autoreconf: running: glibtoolize --copy --force :info:configure glibtoolize: putting auxiliary files in `.'. :info:configure glibtoolize: copying file `./ltmain.sh' :info:configure glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and :info:configure glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in-tree. :info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. :info:configure configure.ac:28: warning: AC_INIT: not a literal: ​https://bugs.freedesktop.org/enter_bug.cgi?product=xorg :info:configure autoreconf: running: /opt/local/bin/autoconf --force :info:configure configure.ac:28: warning: AC_INIT: not a literal: ​https://bugs.freedesktop.org/enter_bug.cgi?product=xorg :info:configure configure:10695: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl :info:configure If this token and others are legitimate, please use m4_pattern_allow. :info:configure See the Autoconf documentation. :info:configure autoreconf: /opt/local/bin/autoconf failed with exit status: 1 :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf --install -fvi " returned error 1 :error:configure Target org.macports.configure returned: autoreconf failure: shell command failed :debug:configure Backtrace: autoreconf failure: shell command failed

while executing

"$procedure $targetname" :info:configure Warning: the following items did not execute (for xorg-libXp): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Log for xorg-libXp is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXp/main.log