diff for README

[fkr-ml@…]

this diff changes all "Darwin Ports' and 'darwinports' (only if not in the sense of any commands, directories etc.) to DarwinPorts, as this is the "correct way" :)

this diff depends on bug #307, as it mentions doc/portfileHOWTO (which was submitted in #307)

the diff can also be found at: ​http://www.opendarwin.org/~fkr/patch-README

Index: README
===================================================================
RCS file: /Volumes/src/cvs/od/proj/darwinports/README,v
retrieving revision 1.25
diff -u -r1.25 README
--- README	23 Dec 2002 19:35:17 -0000	1.25
+++ README	27 Dec 2002 20:04:13 -0000
@@ -1,16 +1,16 @@
 WHAT IS THE DARWIN PORTS SYSTEM
 
-    Darwin Ports is a software build, install, and packaging infrastructure
+    DarwinPorts is a software build, install, and packaging infrastructure
 designed to meet the same functionality requirements as the FreeBSD ports
 architecture while maintaining extensibility for future enhancement.
 
-    Darwin Ports currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
+    DarwinPorts currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
 system is portable, written in TCL with a limited set of TCL extensions in C.
 
     For in-depth documentation on the internals of the ports system
 architecture, refer to base/docs/INTERNALS.
 
-    Please note that darwinports is split into two parts.  The "darwin ports
+    Please note that DarwinPorts is split into two parts.  The "darwin ports
 infrastructure", which lives in the base/ subdirectory and is the only
 mandatory component of the system, and the "dports" directory which contains
 the actual ported software descriptions.  The latter is optional and can be
@@ -24,7 +24,7 @@
 		Run 'make' to compile all necessary software.
 
 	2. sudo make install
-		Run 'sudo make install' to install darwinports on your system.
+		Run 'sudo make install' to install DarwinPorts on your system.
 
 	3. [optional] edit /etc/ports/ports.conf
 		The /etc/ports/ports.conf configuration file defines several
@@ -46,7 +46,7 @@
     All necessary code and TCL will be compiled and installed as follows:
 	[Mac OS X] /System/Library/Tcl/8.3/darwinports1.0
 	[FreeBSD] /usr/local/lib/tcl8.3/darwinports1.0
-	    - TCL library for interfacing with the Darwin Ports System
+	    - TCL library for interfacing with the DarwinPorts System
 
 	PREFIX is set to /opt/local but can be overridden on the make command
 	line and affects the installation of the following components:
@@ -69,7 +69,7 @@
 USING THE PORT COMMAND
 
     If you haven't already, add /opt/local/bin to your path (or $PREFIX/bin
-if you've elected to install darwinports somewhere else). If you're
+if you've elected to install DarwinPorts somewhere else). If you're
 unsure how, add the following line to your ~/.cshrc file.
 
 	set path=($path /opt/local/bin)
@@ -102,8 +102,8 @@
 to be kept to a minimum.
 
     A Portfile consists of valid TCL, evaluated by a TCL interpreter
-instantiated by the Darwin Ports System. Portfiles use extremely straight-
+instantiated by the DarwinPorts System. Portfiles use extremely straight-
 forward key/value pair syntax, while allowing the author to use the full
 extent of TCL's functionality where necessary.
 
-    To get started, refer to doc/exampleport and the portfile(7) man page.
+    To get started, refer to doc/portfileHOWTO and the portfile(7) man page.

[fkr-ml@…]

an updated patch.

it's at: ​http://www.opendarwin.org/~fkr/patch-README

and here:

Index: README
===================================================================
RCS file: /Volumes/src/cvs/od/proj/darwinports/README,v
retrieving revision 1.25
diff -r1.25 README
3c3
<     Darwin Ports is a software build, install, and packaging infrastructure
---
>     DarwinPorts is a software build, install, and packaging infrastructure
7c7
<     Darwin Ports currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
---
>     DarwinPorts currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
13c13
<     Please note that darwinports is split into two parts.  The "darwin ports
---
>     Please note that DarwinPorts is split into two parts.  The "darwin ports
27c27
< Run 'sudo make install' to install darwinports on your system.
---
> Run 'sudo make install' to install DarwinPorts on your system.
49c49
<     - TCL library for interfacing with the Darwin Ports System
---
>     - TCL library for interfacing with the DarwinPorts System
72c72
< if you've elected to install darwinports somewhere else). If you're
---
> if you've elected to install DarwinPorts somewhere else). If you're
105c105
< instantiated by the Darwin Ports System. Portfiles use extremely straight-
---
> instantiated by the DarwinPorts System. Portfiles use extremely straight-
109c109,110
<     To get started, refer to doc/exampleport and the portfile(7) man page.
---
>     To get started, refer to base/doc/exampleport, base/doc/portfileHOWTO
> and the portfile(7) man page.