sudo port install py26-pybox2d

[shazaum@…]

version:1 :debug:main Found Dependency: path: /usr/bin filename: unzip regex: ^{unzip$ :debug:main epoch: in tree: 0 installed: 0 :debug:main swig 2.0.4_0 exists in the ports tree :debug:main swig 2.0.4_0 is the latest installed :debug:main swig 2.0.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! swig 2.0.4_0 >= swig 2.0.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main pcre 8.12_1 exists in the ports tree :debug:main pcre 8.12_1 is the latest installed :debug:main pcre 8.12_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pcre 8.12_1 >= pcre 8.12_1 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20110802-3.0_0 exists in the ports tree :debug:main libedit 20110802-3.0_0 is the latest installed :debug:main libedit 20110802-3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.6_0 exists in the ports tree :debug:main zlib 1.2.6_0 is the latest installed :debug:main zlib 1.2.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python26 2.6.7_4 exists in the ports tree :debug:main python26 2.6.7_4 is the latest installed :debug:main python26 2.6.7_4 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python26 2.6.7_4 >= python26 2.6.7_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 is the latest installed :debug:main expat 2.0.1_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0g_0 exists in the ports tree :debug:main openssl 1.0.0g_0 is the latest installed :debug:main openssl 1.0.0g_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0g_0 >= openssl 1.0.0g_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.10_0 exists in the ports tree :debug:main sqlite3 3.7.10_0 is the latest installed :debug:main sqlite3 3.7.10_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.10_0 >= sqlite3 3.7.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select :debug:main OS darwin/11.3.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :msg:main ---> Computing dependencies for py26-pybox2d:info:main .:debug:main Searching for dependency: unzip :debug:main Didn't find receipt, going to depspec regex for: unzip :debug:main Found Dependency: path: /usr/bin filename: unzip regex:} unzip$ :debug:main Found Dependency: path: /usr/bin filename: unzip regex: ^{unzip$ :debug:main Searching for dependency: swig :debug:main Found Dependency: receipt exists for swig :debug:main Searching for dependency: python26 :debug:main Found Dependency: receipt exists for python26 :msg:main :debug:main Executing org.macports.main (py26-pybox2d) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 502 :debug:main euid changed to: 504 :debug:main Skipping completed org.macports.archivefetch (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (py26-pybox2d) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Feb 23 16:20:44 BRST 2012 :notice:build ---> Building py26-pybox2d :debug:build Executing proc-pre-org.macports.build-build-0 :debug:build Executing org.macports.build (py26-pybox2d) :debug:build Environment: CFLAGS='-arch x86_64' CXXFLAGS='-arch x86_64' CPATH='/opt/local/include' MACOSX_DEPLOYMENT_TARGET='10.7' LIBRARY_PATH='/opt/local/lib' F90FLAGS='-m64' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/.CC_PRINT_OPTIONS' LDFLAGS='-arch x86_64' FCFLAGS='-m64' OBJCFLAGS='-arch x86_64' FFLAGS='-m64' CC_PRINT_OPTIONS='YES' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build :info:build Using setuptools. :info:build running build :info:build running build_py :info:build copying ./init.py -> build/lib.macosx-10.7-x86_64-2.6/Box2D :info:build running build_ext :info:build building 'Box2D._Box2D' extension :info:build swigging Box2D/Box2D.i to Box2D/Box2D_wrap.cpp :info:build swig -python -c++ -IBox2D -O -small -includeall -ignoremissing -w201 -outdir . -o Box2D/Box2D_wrap.cpp Box2D/Box2D.i :info:build Box2D/Box2D_printing.i:29: Error: Syntax error in input(3). :info:build error: command 'swig' failed with exit status 1 :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/work/Box2D-2.0.2b2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details)}

while executing

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: the following items did not execute (for py26-pybox2d): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for py26-pybox2d is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pybox2d/py26-pybox2d/main.log