octave-devel @ 3.6.3 -- can't use fltk toolkit

[cdemills@…]

Hello,
myself and Ben Abbott tried to use the fltk toolkit. From inside octave:

available_graphics_toolkits 
ans = 
{ 
  [1,1] = fltk 
  [1,2] = gnuplot 
} 
graphics_toolkit fltk 
error: feval: function `__init_fltk__' not found 
error: called from: 
error:   /opt/local/share/octave/3.6.3/m/plot/graphics_toolkit.m at line 59, column 5 
which "__init_gnuplot__" 
`__init_gnuplot__' is a function from the file /opt/local/lib/octave/3.6.3/oct/x86_64-apple-darwin12.2.0/__init_gnuplot__.oct
 which "__init_fltk__" 
=> no reply

The dir /opt/local/lib/octave/3.6.3/oct/x86_64-apple-darwin12.2.0 contains both __init_gnuplot.oct and __init_fltk.oct as required:

file __init_gnuplot__.oct 
__init_gnuplot__.oct: Mach-O 64-bit bundle x86_64 
file __init_fltk__.oct         
__init_fltk__.oct: Mach-O 64-bit bundle x86_64 

I installed octave-devel straight from the macport.

Regards

Pascal

[michaelld (Michael Dickens)]

fltk works for me inside octave. I'm using "fltk-devel" as the providing port. Maybe "fltk" (not -devel) doesn't work? Try the devel version and see if that works.

[michaelld (Michael Dickens)]

Closing due to lack of feedback.

[cdemills@…]

Replying to michaelld@…:

Closing due to lack of feedback.

Sorry for the delay, I hadn't chances to look into this issue until recently

1) added fltk-devel => stil not working

2) Comparing __init_gnuplot__.oct and __init__fltk__oct with respect to libs:

otool -L __init_gnuplot__.oct
__init_gnuplot__.oct:
        /opt/local/lib/libstdc++.6.dylib (compatibility version 7.0.0,current version 7.17.0)
        /opt/local/lib/gcc45/libgfortran.3.dylib (compatibility version 4.0.0, current version 4.0.0)
        /opt/local/lib/octave/3.6.3/liboctinterp.1.dylib (compatibility version 2.0.0, current version 2.2.0)
        /opt/local/lib/octave/3.6.3/liboctave.1.dylib (compatibility version 3.0.0, current version 3.0.0)
        /opt/local/lib/octave/3.6.3/libcruft.1.dylib (compatibility version 2.0.0, current version 2.1.0)
        /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0)
        /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib (compatibility version 1.0.0, current version 380.6.0)
        /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1669.0.0)
        /opt/local/lib/gcc45/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)

otool -L __init_fltk__.oct
__init_fltk__.oct:
        /opt/local/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.17.0)
        /opt/local/lib/gcc45/libgfortran.3.dylib (compatibility version 4.0.0, current version 4.0.0)
        /opt/local/lib/octave/3.6.3/liboctinterp.1.dylib (compatibility version 2.0.0, current version 2.2.0)
        /opt/local/lib/octave/3.6.3/liboctave.1.dylib (compatibility version 3.0.0, current version 3.0.0)
        /opt/local/lib/octave/3.6.3/libcruft.1.dylib (compatibility version 2.0.0, current version 2.1.0)
        /opt/local/lib/libfreetype.6.dylib (compatibility version 16.0.0, current version 16.0.0)
        /opt/local/lib/libz.1.dylib (compatibility version 1.0.0, current version 1.2.7)
        /opt/local/lib/libbz2.1.0.dylib (compatibility version 1.0.0, current version 1.0.6)
        /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0)
        /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib (compatibility version 1.0.0, current version 380.6.0)
        /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1669.0.0)
        /opt/local/lib/gcc45/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)

At first sight, no missing libs, fltk uses freetype6, z and bz2 as supplemental libs. I don't understand why __init_fltk__.oct is still considered as missing.

Regards

Pascal

[michaelld (Michael Dickens)]

What does "port installed" return for you? Maybe attach it as a text document would be best.

[cdemills@…]

Replying to michaelld@…:

What does "port installed" return for you? Maybe attach it as a text document would be best.

file 'portinstalled' enclosed.

I just updated MacPorts to 2.1.3. A new octave-devel version was rebuilt as octave-devel @3.6.3_1+accelerate+gcc45, and __init_ftlk__.oct is still unusable.

Regards

Pascal

[michaelld (Michael Dickens)]

First, do the following to see if it works:

sudo port install octave-devel +fltk +accelerate +gcc45

Not sure if this makes any difference, but some of your installed ports are +gcc45 while others are +gcc47. Unless you cannot do otherwise, I strongly advise you to replace those with +gcc45 with +gcc47, then remove gcc45 and all of the old non-active cruft. In my experience, mixing GCC versions between various ports is a setup for serious issues down the road.

[cdemills@…]

Replying to michaelld@…:

First, do the following to see if it works:

sudo port install octave-devel +fltk +accelerate +gcc45

Not sure if this makes any difference, but some of your installed ports are +gcc45 while others are +gcc47. Unless you cannot do otherwise, I strongly advise you to replace those with +gcc45 with +gcc47, then remove gcc45 and all of the old non-active cruft. In my experience, mixing GCC versions between various ports is a setup for serious issues down the road.

OK. Trying to migrate everything to +gcc47. While trying to remove gcc45, I got a message about atlas and arpack depending on it. So I rebuilt both with +gcc47, and uninstalled the gcc45 version. The strange thing is that

port list variant:gcc45

still shows atlas and arpack in the list. Is there some way with the port command to display, for each package, the compiler it depends from ? I mean, some kind of more verbose output ?

Regards

Pascal

[michaelld (Michael Dickens)]

"port list" just lists ports that meet the criteria you've set, no matter if they are installed, active, or not (one or either). I think what you're looking for is:

port installed | grep active | grep +gcc45

to determine which ports are actively still using the +gcc45 variant. I don't know of a better way to do this, e.g., just using port FOO.

I also keep my MacPorts install nice and clean, generally removing anything that's not active:

bar=`port installed | grep -v active | sed -e 1d`
echo $bar

and, then if you like what you see, you can do:

sudo port uninstall $bar

I wish there were a port command to clean out old distfiles that are connected with these ports I'm uninstalling; have to do that by hand still, as far as I know. "sudo port clean --all $bar" would wipe out all distfiles.

[cdemills@…]

Replying to michaelld@…:

"port list" just lists ports that meet the criteria you've set, no matter if they are installed, active, or not (one or either). I think what you're looking for is:

port installed | grep active | grep +gcc45

to determine which ports are actively still using the +gcc45 variant. I don't know of a better way to do this, e.g., just using port FOO.

I also keep my MacPorts install nice and clean, generally removing anything that's not active:

bar=`port installed | grep -v active | sed -e 1d`
echo $bar

and, then if you like what you see, you can do:

sudo port uninstall $bar

I wish there were a port command to clean out old distfiles that are connected with these ports I'm uninstalling; have to do that by hand still, as far as I know. "sudo port clean --all $bar" would wipe out all distfiles.

Hummmm ... recompiled octave-devel and all of its dependencies with +gcc47; same problem: __init_fltk__.oct is still not found; while it is available in the same dir as __init___gnuplot.oct

Pascal

[michaelld (Michael Dickens)]

If

port installed octave-devel | grep active

does not return something that includes +fltk, then you need to install octave-devel including the +fltk variant; this variant is not enabled by default, and it was not enabled in the "portinstalled" list you provided above. Please verify this; if not, then do:

sudo port install octave-devel +fltk +accelerate +gcc47

or whatever variants you wish but including +fltk.

[accounts@…]

It seems this problem is NOT exclusive to MacPorts. I am seeing the same exact issue on OpenSolaris. Please let me know if there is more helpful info I can post.

// From Package Manager //
Name:	math/octave
Summary:	octave High-level language, intended for numerical computations
Installed:	 3.6.3 (Build 5.11-0.151.1.7)
Size:	323.33 MB
Category:	Math
Publisher:	sfe

[555][athena: /export/home/myUser]$ cat /etc/release 
             OpenIndiana Development oi_151.1.7 X86 (powered by illumos)
        Copyright 2011 Oracle and/or its affiliates. All rights reserved.
                        Use is subject to license terms.
                           Assembled 03 October 2012

[556][athena: /export/home/myUser]$ uname -a
SunOS athena 5.11 oi_151a7 i86pc i386 i86pc Solaris

[557][athena: /export/home/myUser]$ which octave
/usr/bin/octave
[558][athena: /export/home/myUser]$ octave

GNU Octave, version 3.6.3
Copyright (C) 2012 John W. Eaton and others.
This is free software; see the source code for copying conditions.
There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  For details, type `warranty'.
Octave was configured for "i386-pc-solaris2.11".
Additional information about Octave is available at http://www.octave.org.
Please contribute if you find this software useful.
For more information, visit http://www.octave.org/help-wanted.html
Read http://www.octave.org/bugs.html to learn how to submit bug reports.
For information about changes from previous versions, type `news'.

octave:1> available_graphics_toolkits 
ans = 
{
  [1,1] = fltk
  [1,2] = gnuplot
}
octave:2> graphics_toolkit fltk
error: feval: function `__init_fltk__' not found
error: called from:
error:   /usr/share/octave/3.6.3/m/plot/graphics_toolkit.m at line 59, column 5
octave:2> 
octave:2> which "__init_gnuplot__"
`__init_gnuplot__' is a function from the file /usr/lib/octave/3.6.3/oct/i386-pc-solaris2.11/__init_gnuplot__.oct
octave:3> which "__init_fltk__"
octave:4> 

[559][athena: /export/home/myUser]$ slocate __init_gnuplot__
/usr/lib/octave/3.6.3/oct/i386-pc-solaris2.11/__init_gnuplot__.oct
[560][athena: /export/home/myUser]$ slocate fltk |grep -v SFE
/usr/lib/libfltk_images.so.1.1
/usr/lib/libfltk_gl.so.1.1
/usr/lib/libfltk.so.1.1
/usr/lib/libfltk_forms.so.1.1
/usr/lib/libfltk_gl.a
/usr/lib/libfltk_forms.so
/usr/lib/octave/3.6.3/oct/i386-pc-solaris2.11/__init_fltk__.oct
/usr/lib/octave/3.6.3/oct/i386-pc-solaris2.11/__fltk_uigetfile__.oct
/usr/lib/libfltk_images.so
/usr/lib/libfltk.so
/usr/lib/libfltk_gl.so
/usr/bin/fltk-config
/usr/share/doc/fltk
...
/usr/share/man/man3/fltk.3
/usr/share/octave/3.6.3/m/plot/private/__fltk_file_filter__.m
/usr/share/octave/3.6.3/m/plot/private/__uigetfile_fltk__.m
/usr/share/octave/3.6.3/m/plot/private/__fltk_print__.m
/usr/share/octave/3.6.3/m/plot/private/__fltk_ginput__.m
/usr/share/octave/3.6.3/m/plot/private/__uigetdir_fltk__.m
/usr/share/octave/3.6.3/m/plot/private/__uiputfile_fltk__.m
[561][athena: /export/home/myUser]$ 

[anddam (Andrea D'Amore)]

Cc Me!

[anddam (Andrea D'Amore)]

Replying to michaelld@…:

"port list" just lists ports that meet the criteria you've set, no matter if they are installed, active, or not (one or either). I think what you're looking for is:

port installed | grep active | grep +gcc45

Or

port echo active and variant:gcc45

[garrick@…]

Cc Me!

[anddam (Andrea D'Amore)]

Replying to cdemills@…:

Hummmm ... recompiled octave-devel and all of its dependencies with +gcc47; same problem: __init_fltk__.oct is still not found; while it is available in the same dir as __init___gnuplot.oct

I'm able to use octave-devel 3.6.3-1 fltk backend using fltk (not fltk-devel) port on my 10.7 system using Xcode 4.6, I'd like to recap actual status of the package on your system:

• Is your port tree updated? (port sync)
• Did you rebuild octave-devel using -s option? (build-from-source option rather than fetching binary packages)
• What's the actual command you ran in order to rebuild octave?
• What's the current output of:

  port -v installed octave-devel fltk fltk-devel'''
  

[anddam (Andrea D'Amore)]

Replying to accounts@…:

It seems this problem is NOT exclusive to MacPorts. I am seeing the same exact issue on OpenSolaris. Please let me know if there is more helpful info I can post.

And to confirm that today I stumbled into the very same issue on Arch Linux, another user had already ​reported it.

On Arch I was able to rebuild the package and have it working, the init_fltk.oct file had a different size than the one shipped with binary package from official repository.

[michaelld (Michael Dickens)]

Is this ticket still an issue? The basic and original issue is that octave-devel was not installed with the +fltk variant. In order for FLTK (as the fltk or fltk-devel port) to be recognized by octave (as provided by the port octave-devel), you -have- to use the +fltk variant. The OP had installed octave-devel without +fltk, which is why it was not working even after fltk-devel was installed in place of fltk. Even when updating to a newer octave-devel and +gcc47, I don't believe that the OP chose the +fltk variant.

[accounts12@…]

Michael, Thanks for the description. I haven't needed Octave for a few weeks now but whenever I return to this, I'll test out your solution and post back.

[michaelld (Michael Dickens)]

OK. I'm closing this ticket. If, when you try this again, you still have issues with it, reopen this ticket.

[MacPorts@…]

I had this problem and it went away after I reinstalled as follows on my MacBook Pro:

port install octave-devel +fltk +gcc47

I omitted the +accelerate variant because I got a warning earlier that there are crashes associated with that.

[MacPorts@…]

Cc Me!