Opened 10 years ago

Closed 10 years ago

Last modified 10 years ago

#43859 closed defect (worksforme)

New port version fails to uninstall ports: '": file name too long'

Reported by: ballapete (Peter "Pete" Dyballa) Owned by: macports-tickets@…
Priority: Normal Milestone:
Component: base Version: 2.3.0
Keywords: Cc:
Port:

Description

After performing a selfupdate I wanted to uninstall the old deactivated ports. This fails à la:

--->  Uninstalling tiff @4.0.3_2
Error: port uninstall failed: error deleting "/opt/local/var/macports/registry/portfiles/tiff-4.0.3_2/# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id: Portfile 113360 2013-11-14 14:28:06Z mojca@macports.org $

PortSystem          1.0
PortGroup           xcodeversion 1.0
PortGroup           muniversal 1.0

name                tiff
version             4.0.3
revision            2
categories          graphics
platforms           darwin
license             BSD

maintainers         nomaintainer

description         Library and tools for dealing with Tag Image File Format
long_description    \
    This software provides support for the Tag Image File       \
    Format (TIFF), a widely used format for storing image       \
    data.  Included in this software distribution is a          \
    library, libtiff, for reading and writing TIFF, a small     \
    collection of tools for doing simple manipulations of       \
    TIFF images on UNIX systems, documentation on the library   \
    and tools.  A small assortment of TIFF-related software     \
    for UNIX that has been contributed by others is also        \
    included.  The library is capable of dealing with images    \
    that are written to follow the 5.0 or 6.0 TIFF spec.        \
    There is also considerable support for some of the more     \
    esoteric portions of the 6.0 TIFF spec.

homepage            http:/www.remotesensing.org/libtiff
master_sites        http:/download.osgeo.org/libtiff/ \
                    ftp:/ftp.remotesensing.org/pub/libtiff/ \
                    http:/dl.maptools.org/dl/libtiff/ \
                    freebsd

checksums           rmd160  eacd725fb3c299682c1c2e508049d98acd170f31 \
                    sha256  ea1aebe282319537fb2d4d7805f478dd4e0e05c33d0928baba76a7c963684872

depends_lib         port:jpeg \
                    port:xz \
                    port:zlib

test.run            yes
test.target         check

use_autoreconf      yes
autoreconf.args     -fvi

patchfiles          patch-int64.diff

configure.args      --disable-jbig \
                    --with-docdir=${prefix}/share/doc/${name} \
                    --with-jpeg-include-dir=${prefix}/include \
                    --with-jpeg-lib-dir=${prefix}/lib \
                    --with-lzma-include-dir=${prefix}/include \
                    --with-lzma-lib-dir=${prefix}/lib \
                    --with-zlib-include-dir=${prefix}/include \
                    --with-zlib-lib-dir=${prefix}/lib

configure.ldflags-append \
                    -headerpad_max_install_names

use_parallel_build  yes

platform macosx {
    # Tiger does not have 64-bit OpenGL.
    if {${os.major} > 8 || (![variant_isset universal] && ![string match *64* $build_arch])
        || ([variant_isset universal] && ![string match *64* $universal_archs])} {
        configure.args-append   --with-apple-opengl-framework
    }
}

minimum_xcodeversions {9 3.1}

# tools/tiffgt.c incorrectly uses HAVE_APPLE_OPENGL_FRAMEWORK rather than HAVE_OPENGL_GL_H
configure.cppflags-append \
                    -DHAVE_APPLE_OPENGL_FRAMEWORK

variant jbig description {Enable JBIG support} {
    depends_lib-append      port:jbigkit
    configure.args-delete   --disable-jbig
    configure.args-append   --enable-jbig
}

livecheck.type  regex
livecheck.url   http:/www.remotesensing.org/libtiff/
livecheck.regex {v(\d+(?:\.\d+)*)</a>}
": file name too long

Change History (8)

comment:1 Changed 10 years ago by neverpanic (Clemens Lang)

This looks like an upgrade script gone wrong. make install of your update to 2.3.0 should have run depup_portfiles.tcl which should have moved the Portfiles from the registry to the filesystem and replaced the Portfiles in the registry database with the names of the directories. Apparently that didn't happen for you.

Can you please post the output of

sqlite3 $prefix/var/macports/registry/registry.db 'SELECT * FROM metadata'

comment:2 in reply to:  1 Changed 10 years ago by ballapete (Peter "Pete" Dyballa)

Replying to cal@…:

This looks like an upgrade script gone wrong. make install of your update to 2.3.0 should have run depup_portfiles.tcl which should have moved the Portfiles from the registry to the filesystem and replaced the Portfiles in the registry database with the names of the directories. Apparently that didn't happen for you.

Yes, there was a bug with two Perl files with a bit special names …

Can you please post the output of

sqlite3 $prefix/var/macports/registry/registry.db 'SELECT * FROM metadata'
pete 135 /\ sqlite3 /opt/local/var/macports/registry/registry.db 'SELECT * FROM metadata'
version|1.200
created|1334908737
portfiles_update_needed|1

comment:3 Changed 10 years ago by neverpanic (Clemens Lang)

The portfiles_update_needed key tells us the conversion needs to be done but hasn't been completed yet. If you can, please run "sudo make install" from the source tree again. Let me know if you need help finding the proper source tree (e.g. if you updated using selfupdate).

Last edited 10 years ago by neverpanic (Clemens Lang) (previous) (diff)

comment:4 in reply to:  3 Changed 10 years ago by ballapete (Peter "Pete" Dyballa)

Replying to cal@…:

If you can, please run "sudo make install" from the source tree again. Let me know if you need help finding the proper source tree (e.g. if you updated using selfupdate).

I have no idea where this source tree can be… I invoked 'port selfupdate' and during this port indeed updated itself…

comment:5 Changed 10 years ago by neverpanic (Clemens Lang)

In that case it's in /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base. Run sudo make install there.

comment:6 in reply to:  5 ; Changed 10 years ago by ballapete (Peter "Pete" Dyballa)

Replying to cal@…:

In that case it's in /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base. Run sudo make install there.

I had to configure and and build again, the sources were already clean – and it seems that the uninstall jobs had been executed despite the error messages. Uninstall now works quite silently.

comment:7 in reply to:  6 ; Changed 10 years ago by neverpanic (Clemens Lang)

Resolution: worksforme
Status: newclosed

Replying to Peter_Dyballa@…:

I had to configure and and build again, the sources were already clean

I wasn't aware that MacPorts runs distclean. It might just be the next rsync that deletes the configuration data, though.

and it seems that the uninstall jobs had been executed despite the error messages. Uninstall now works quite silently.

Yes. On uninstall, the Portfiles are only loaded to execute possible pre/post-deactivate jobs, but even if that fails the removal continues.

Glad you could solve the issue. I'm not sure that's something we should build into MacPorts to detect, as it's probably very uncommon.

comment:8 in reply to:  7 Changed 10 years ago by regnauld@…

Replying to cal@…:

Glad you could solve the issue. I'm not sure that's something we should build into MacPorts to detect, as it's probably very uncommon.

Hmm, I have exactly the same problem, so I found this post. Tried following the instructions, but now:

Darwin 13.2.0 Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64 x86_64 i386
Apple LLVM version 5.1 (clang-503.0.40) (based on LLVM 3.4svn)
Target: x86_64-apple-darwin13.2.0
Thread model: posix

Similar output from sqlite3:

version|1.200
created|1311408569
portfiles_update_needed|1

and tried to reinstall from:

/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base

(had to make clean, configure, and make install).

Install fails with:

Processing 1 of 1382: Xaw3d-1.5E_4.darwin_13.i386.tbz2
Command failed: /usr/bin/tar -cjf /opt/local/var/macports/software/Xaw3d/Xaw3d-1.5E_4.darwin_13.i386.tbz2 -T /opt/local/var/macports/software/Xaw3d/tarlist > /opt/local/var/macports/software/Xaw3d/error.log 2>&1

Log contains:

tar: Removing leading '/' from member names
tar: /opt/local/include/X11/Xaw3d/Template.c: Cannot stat: No such file or directory
tar: /opt/local/include/X11/Xaw3d/Template.h: Cannot stat: No such file or directory
tar: /opt/local/include/X11/Xaw3d/TemplateP.h: Cannot stat: No such file or directory
tar: /opt/local/lib/libXaw3d.8.0.dylib: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors.

... and I can't continue (can't reinstall macports, can't finish upgrading).

So, doesn't seem to be uncommon.

Last edited 10 years ago by ryandesign (Ryan Carsten Schmidt) (previous) (diff)
Note: See TracTickets for help on using tickets.