py27-gobject +quartz build failure: implicit declaration of function 'g_desktop_app_info_set_desktop_env'

[jmercouris (John Mercouris)]

Fails to compile. Only the X11 variant can compile on my system. Please see attached log.

[ryandesign (Ryan Carsten Schmidt)]

MacPorts glib2 contains a substantial patch written by a MacPorts contributor to implement a new glib2 feature: the introduction of a macOS-specific appinfo implementation. Previously, glib2 only offered a "freedesktop" appinfo implementation which was suitable for Linux systems but not as useful for Macs.

g_desktop_app_info_set_desktop_env is part of the "freedesktop" appinfo implementation which we now offer only in the +x11 variant. It's not available when you select the macOS appinfo implementation by using the +quartz variant.

py-gobject evidently uses g_desktop_app_info_set_desktop_env, so py-gobject cannot be used with glib2's +quartz variant. If you want py-gobject, you'll need to use +x11 for glib2 and everything else. Or you might ask the developers of py-gobject if they want to stop using g_desktop_app_info_set_desktop_env, since it has been deprecated since glib 2.42. Or maybe we can apply ​this patch to py-gobject to do so.

Here is the ​issue tracking the new macOS appinfo implemenation. Over three years later it still hasn't been resolved. The last comments in the issue, from over a year ago, are about maybe reimplementing it as a runtime option.

In the mean time, glib2 has switched to meson, and any further development by them of this feature will be incorporated into the meson build system. MacPorts has not updated to a meson version of glib2 yet because that is difficult.

[MaurizioLoreti]

py27-gobject +quartz is between my ports because I installed gimp +quartz. Still no foresight for a working py27-gobject +quartz ? GIMP does not run currently on my Mac, but I don't know if that is due to gobject or not. Please?

[ryandesign (Ryan Carsten Schmidt)]

It doesn't look like anybody is volunteering to work on this now. Until it's resolved, if you want gimp (or anything else that depends on py-gobject), you'll need to avoid using the +quartz variant.

[kencu (Ken)]

I thought lots of people were running gimp +quartz on MacPorts, and had been be many years now. Did something recently break it?

[iefdev (Eric F)]

Replying to kencu:

I thought lots of people were running gimp +quartz on MacPorts, and had been for many years now. Did something recently break it?

It wasn't too long we updated gimp2 and fixed it for <= 10.7 (#60508). I use quartz, and it works. Is this a new break?

$ port installed gimp2 py27-gobject
The following ports are currently installed:
  gimp2 @2.10.20_0+python27+quartz (active)
  py27-gobject @2.28.7_1+quartz (active)

[iefdev (Eric F)]

If it helps… Here's a log from: sudo port -t destroot py27-gobject +quartz

[jmercouris (John Mercouris)]

I would like to note that I did get it to compile with the following patch:

--- gio/unix-types.defs.orig	2020-09-02 13:56:20.000000000 +0200
+++ gio/unix-types.defs	2020-09-02 13:59:41.000000000 +0200
@@ -15,8 +15,8 @@
   )
   (in-module "giounix")
   (parent "GObject")
-  (c-name "GDesktopAppInfo")
-  (gtype-id "G_TYPE_DESKTOP_APP_INFO")
+  (c-name "GOsxAppInfo")
+  (gtype-id "G_TYPE_OSX_APP_INFO")
 )
 
 (define-object FDMessage
--- gio/unix.defs.orig	2020-09-02 13:56:46.000000000 +0200
+++ gio/unix.defs	2020-09-02 13:57:04.000000000 +0200
@@ -31,55 +31,6 @@
 )
 
 
-
-;; From gdesktopappinfo.h
-
-(define-function desktop_app_info_get_type
-  (c-name "g_desktop_app_info_get_type")
-  (return-type "GType")
-)
-
-(define-function desktop_app_info_new_from_filename
-  (c-name "g_desktop_app_info_new_from_filename")
-  (return-type "GDesktopAppInfo*")
-  (parameters
-    '("const-char*" "filename")
-  )
-)
-
-(define-function g_desktop_app_info_new_from_keyfile
-  (c-name "g_desktop_app_info_new_from_keyfile")
-  (return-type "GDesktopAppInfo*")
-  (parameters
-    '("GKeyFile*" "key_file")
-  )
-)
-
-(define-function desktop_app_info_new
-  (c-name "g_desktop_app_info_new")
-  (is-constructor-of "GDesktopAppInfo")
-  (return-type "GDesktopAppInfo*")
-  (parameters
-    '("const-char*" "desktop_id")
-  )
-)
-
-(define-method get_is_hidden
-  (of-object "GDesktopAppInfo")
-  (c-name "g_desktop_app_info_get_is_hidden")
-  (return-type "gboolean")
-)
-
-(define-function desktop_app_info_set_desktop_env
-  (c-name "g_desktop_app_info_set_desktop_env")
-  (return-type "none")
-  (parameters
-    '("const-char*" "desktop_env")
-  )
-)
-
-
-
 ;; From gunixfdmessage.h
 
 (define-function g_unix_fd_message_get_type
--- gio/unix.override.orig	2020-09-02 13:55:46.000000000 +0200
+++ gio/unix.override	2020-09-02 13:59:41.000000000 +0200
@@ -24,7 +24,7 @@
 #define NO_IMPORT_PYGOBJECT
 #include <pygobject.h>
 #include <gio/gio.h>
-#include <gio/gdesktopappinfo.h>
+#include <gio/gosxappinfo.h>
 #include <gio/gunixinputstream.h>
 #include <gio/gunixmounts.h>
 #include <gio/gunixoutputstream.h>

Not ideal, but perhaps most users do not need these functions.

[kencu (Ken)]

I thought I would give this a try to see what's going on. I deactivated all my ports on Catalina (sigh) and tried to install this. It installed right through, without touching a thing:

% sudo port -v install py27-gobject +quartz

% port -v installed py27-gobject 
The following ports are currently installed:
  py27-gobject @2.28.7_1+quartz (active) platform='darwin 19' archs='x86_64' date='2020-09-16T08:20:50-0700'

[jmercouris (John Mercouris)]

Could it be possibly an issue of installation ordering?

[kencu (Ken)]

Try a trace build. maybe you're picking up something unexpected...

[kencu (Ken)]

has duplicate #61205

[MaurizioLoreti]

Well, here we are again. I installed MacOS 11.0 "Big Sur" and, as usual, removed all the installed ports and tried to reinstall them again. As expected, "port install gimp +quartz" barfed because the installation of py27-gobject failed. Than means that I cannot use GIMP +quartz on Big Sur.

As suggested by Kencu, after having uninstalled all the installed ports, I installed first py27-gobject + quartz. It failed. And GIMP could not be installed.

Please...

[kencu (Ken)]

Please remember MacPorts is made up a group of generally helpful, completely unpaid, volunteers, all of whom have other things to do...

I hope that if gimp is mission-critical to you that you wouldn't update to Big Sur in the first week without knowing first if gimp works...I installed Big Sur only the day before yesterday, and have fixed several broken ports since then.

We'll fix it, we always, always, (nearly) always do. If you can help at all, that would be nice...would you like to dig in on why py27-gobject doesn't build? We'd all appreciate the patch, if you can sort it out for us.

For right now, today, --- maybe try the gimp DMG from the gimp website. It will likely work on Big Sur, I'd bet. Give us a week or two, at least, to get through the worst of the wreckage. There were many big changes in Big Sur, perhaps you know.

[kencu (Ken)]

py-gobject has been fixed for Big Sur, so let's see where we get with gimp now...

[kencu (Ken)]

I now see this error when building py27-gobject +quartz on BigSur.

Building in trace mode also fails:

sudo port -v -t install py27-gobject +quartz

building with macports-clang-9.0 or 10 succeeds, however:

sudo port -v install py27-gobject +quartz configure.compiler=macports-clang-9.0

% port -v installed py27-gobject
The following ports are currently installed:
  py27-gobject @2.28.7_1+quartz (active) platform='darwin 20' archs='x86_64' date='2020-11-21T21:05:55-0800'

[kencu (Ken)]

adding this to the Portfile fixes it:

+     configure.cflags-append -Wno-implicit-function-declaration

but probably not for arm64.

[p-bro]

I can confirm that the addition to the portfile suggested by kencu in #comment:19 also allows buidling py27-gobject +quartz on Catalina (I upgraded to Catalina the week Big Sur was released ...)

[kencu (Ken)]

this one will be harder than average to fix properly as it does some on-the-fly file building magic...something like John's patch from coment 9 will be needed

[kencu (Ken)]

has duplicate #61846

[khyox (Jose Manuel Martí)]

Replying to kencu:

adding this to the Portfile fixes it:

+     configure.cflags-append -Wno-implicit-function-declaration

Many thanks for the fix! Confirmed for py27-gobject @2.28.7_1 +quartz in 2.6.4 on Big Sur 11.1 (with Xcode 12.2 and SDK 11.1). With that, the port for gimp +quartz -x11 is successfully installed. Now, gimp crashes because of the runtime error described in #61586.

[kencu (Ken)]

the fix for that crash is known, and we'll soon have it in MP. For now, I found the x11 version of gimp works well...

[landonf (Landon Fuller)]

In bdc92aceb5ff6849f3274ef9422c983f36e609c7/macports-ports (master):

py-gobject: fix +quartz build

The previous patch adopted GOsxAppInfo (replacing GDesktopAppInfo),
but retained the IDL symbol definitions to functions only defined by
GDesktopAppInfo, triggering build failures with -Werror=implicit-function-declaration.

Patch submitted by: John Mercouris
Fixes: #61113