OpenBLAS @0.3.22 fails to build on 10.6 (both ppc and x86_64): Makefile.conf:8: *** missing separator. Stop.

[barracuda156]

This is on 10.6.8:

--->  Building OpenBLAS-devel
Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/OpenBLAS-5a9cd8779484396040848747b2c9ed9f5e9c2c61" && /usr/bin/make -j6 -w all AR=/opt/local/bin/ar RANLIB=/opt/local/bin/ranlib OPENBLAS_INCLUDE_DIR=/opt/local/include/openblas CC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/cc/opt/local/bin/gcc-mp-12" CXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/cxx/opt/local/bin/g++-mp-12" OBJC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/objc/opt/local/bin/gcc-mp-12" OBJCXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/objcxx/opt/local/bin/g++-mp-12" FC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/fc/opt/local/bin/gfortran-mp-12" F77="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/f77/opt/local/bin/gfortran-mp-12" F90="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/f90/opt/local/bin/gfortran-mp-12" INSTALL="/usr/bin/install -c" CC+="-arch ppc" CXX+="-arch ppc" OBJC+="-arch ppc" OBJCXX+="-arch ppc" LD+="-arch ppc" F77+="-m32" F90+="-m32" FC+="-m32" 
make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/OpenBLAS-5a9cd8779484396040848747b2c9ed9f5e9c2c61'
Makefile.conf:8: *** missing separator.  Stop.
make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/OpenBLAS-5a9cd8779484396040848747b2c9ed9f5e9c2c61'

[kencu (Ken)]

what do you see in Makefile.conf on line 8 exactly?

[barracuda156]

1. This error happens both on 10.6 PPC native and 10.6.8 Rosetta, but as usual, what I report is from Rosetta case.

2. Here is the thing:

   OSNAME=Darwin
   ARCH=power
   C_COMPILER=GCC
   BINARY64=
   BINARY32=1
   FU=_
   CROSS_SUFFIX=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/cc/opt/local/bin/gcc-mp-12
   -
   CROSS=1
   CEXTRALIB= -L/opt/local/lib -L/opt/local/lib/gcc12/gcc/powerpc-apple-darwin10/12.2.0 -L/opt/local/lib/gcc12/gcc/powerpc-apple-darwin10/12.2.0/../../..  -lemutls_w -lSystem -lef_ppc 
   F_COMPILER=GFORTRAN
   FC=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS-devel/work/compwrap/fc/opt/local/bin/gfortran-mp-12 -m32
   BU=_
   FEXTRALIB= -L/opt/local/lib -L/opt/local/lib/gcc12/gcc/powerpc-apple-darwin10/12.2.0 -L/opt/local/lib/gcc12/gcc/powerpc-apple-darwin10/12.2.0/../../..  -lgfortran -lSystem -lef_ppc 
   CORE=PPC970
   LIBCORE=ppc970
   NUM_CORES=6
   __BYTE_ORDER__=__ORDER_BIG_ENDIAN__
   MAKE += -j 6
   

On line 8 we get that silly dash :)

BTW notice, choice of subarch is wrong, 970 should not be used in Rosetta (and yes, this is from my MacMini, so Rosetta for sure). It looks like OpenBLAS chooses archs wrongly. This perhaps should be fixed with upstream.

[barracuda156]

So now it is broken after the update.

--->  Configuring OpenBLAS
--->  Building OpenBLAS
Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22" && /usr/bin/make -j8 -w all AR=/opt/local/bin/ar RANLIB=/opt/local/bin/ranlib OPENBLAS_INCLUDE_DIR=/opt/local/include/openblas CC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cc/opt/local/bin/gcc-mp-12" CXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cxx/opt/local/bin/g++-mp-12" OBJC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objc/opt/local/bin/gcc-mp-12" OBJCXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objcxx/opt/local/bin/g++-mp-12" FC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/fc/opt/local/bin/gfortran-mp-12" F77="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/f77/opt/local/bin/gfortran-mp-12" F90="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/f90/opt/local/bin/gfortran-mp-12" INSTALL="/usr/bin/install -c" CC+="-arch ppc" CXX+="-arch ppc" OBJC+="-arch ppc" OBJCXX+="-arch ppc" LD+="-arch ppc" F77+="-m32" F90+="-m32" FC+="-m32" 
make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22'
Makefile.conf:8: *** missing separator.  Stop.
make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22'
Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22" && /usr/bin/make -j8 -w all AR=/opt/local/bin/ar RANLIB=/opt/local/bin/ranlib OPENBLAS_INCLUDE_DIR=/opt/local/include/openblas CC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cc/opt/local/bin/gcc-mp-12" CXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cxx/opt/local/bin/g++-mp-12" OBJC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objc/opt/local/bin/gcc-mp-12" OBJCXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objcxx/opt/local/bin/g++-mp-12" FC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/fc/opt/local/bin/gfortran-mp-12" F77="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/f77/opt/local/bin/gfortran-mp-12" F90="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/f90/opt/local/bin/gfortran-mp-12" INSTALL="/usr/bin/install -c" CC+="-arch ppc" CXX+="-arch ppc" OBJC+="-arch ppc" OBJCXX+="-arch ppc" LD+="-arch ppc" F77+="-m32" F90+="-m32" FC+="-m32" 
Exit code: 2
Error: Failed to build OpenBLAS: command execution failed

[barracuda156]

@kencu The port is broken on x86_64 too, so nothing to do with either GCC, Rosetta or ppc: ​https://build.macports.org/builders/ports-10.6_x86_64-builder/builds/149261/steps/install-port/logs/stdio Same error.

May be you could help to fix this?

[barracuda156]

Also clang < 500 has to be disabled due to: ​https://build.macports.org/builders/ports-10.7_x86_64-builder/builds/138981/steps/install-port/logs/stdio

[kencu (Ken)]

for the mktemp error, you presumably have to use gmktemp, or change it so that the old mktemp in 10.6 and less works. I always seem to want to use gmktemp, but MacPorts' admins usually prefer you rewrite it so the old mktemp works I notice.

For the assembler error, of course upstream should test for certain assembler calls being available before using them. But that is usually a lost cause of a question when you're talking about ancient outdated systems and busy upstreams with better things to do than that.

So what you do instead is make sure that a newer clang is installed, so that the cctools port modifications that were made some years ago can work, and ${prefix}/bin/as can find a new enough clang to use as the assembler.

There is not really a great mechanism to specifically require that one thing, so blacklisting the system clangs that fail to compile the assembly is usually good enough, and then a new enough clang is called in to do the job. Once again, that is not a pure event, but seems to be generally acceptable to the admins as -- well -- there is no really pure option that is better than that.

I'll leave you to the mktemp fix (force gmktemp, usually by patching, or monkeying with the PATH), and then blacklist the failing system clangs.

[barracuda156]

Replying to kencu:

for the mktemp error, you presumably have to use gmktemp, or change it so that the old mktemp in 10.6 and less works. I always seem to want to use gmktemp, but MacPorts' admins usually prefer you rewrite it so the old mktemp works I notice. I'll leave you to the mktemp fix (force gmktemp, usually by patching, or monkeying with the PATH), and then blacklist the failing system clangs.

Turned out that OpenBLAS port seemingly already does this:

--- c_check~	2022-08-07 22:36:26.000000000 +0200
+++ c_check	2022-08-27 11:01:44.000000000 +0200
@@ -243,7 +243,7 @@
 c11_atomics=0
 case "$data" in
     *HAVE_C11*)
-        tmpd=`mktemp -d`
+        tmpd=`gmktemp -d`
         tmpf="$tmpd/a.c"
         printf "#include <stdatomic.h>\nint main(void){}\n" >> "$tmpf"
         args=" -c -o $tmpf.o $tmpf"

​https://github.com/macports/macports-ports/blob/master/math/OpenBLAS/files/patch-MacOSX-mktemp.diff

But it does not help anymore or even does not have an effect. I will try to figure out what is going on.

[rmottola (Riccardo)]

There is another occurence of mktemp at line 207

206 if [ "$architecture" = "x86" ] || [ "$architecture" = "x86_64" ]; then
207     tmpd=`gmktemp -d`
208     tmpf="$tmpd/a.c"

so please extend the patch! It does fix the mktemp error, but not the "missing separator"

[rmottola (Riccardo)]

I still get

Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22" && /usr/bin/make -j2 -w all AR=/opt/local/bin/ar RANLIB=/opt/local/bin/ranlib OPENBLAS_INCLUDE_DIR=/opt/local/include/openblas CC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cc/opt/local/bin/clang-mp-11" CXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/cxx/opt/local/bin/clang++-mp-11" OBJC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objc/opt/local/bin/clang-mp-11" OBJCXX="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/objcxx/opt/local/bin/clang++-mp-11" FC="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/compwrap/fc/opt/local/bin/gfortran-mp-12" INSTALL="/usr/bin/install -c" CC+="-arch x86_64" CXX+="-arch x86_64" OBJC+="-arch x86_64" OBJCXX+="-arch x86_64" LD+="-arch x86_64" F77+="-m64" F90+="-m64" FC+="-m64" 
make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_math_OpenBLAS/OpenBLAS/work/OpenBLAS-0.3.22'
Makefile.conf:8: *** missing separator.  Stop.

[barracuda156]

In 7c5ef053c32bc6e02570379748001835f0e8fcf9/macports-ports (master):

OpenBLAS, -devel: unbreak build on 10.6

Fixes: #66907