bash @5.2.15: When a "command not found" situation happens, Bash prints errors and ends with "Abort Trap: 6" instead of printing "Command not found"

[some1so]

For example, using 'derp' as a fake command (macports 5.2.15(1)-release):

~ $ derp
objc[75690]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called.
objc[75690]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in the fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
Abort trap: 6

expected behavior (Apple supplied 3.2.57):

~ $ derp
bash: derp: command not found
~ $ 

[raimue (Rainer Müller)]

Do you have anything configured as PROMPT_COMMAND in bash that could cause this? Can you reproduce the issue also without your custom bashrc, i.e. bash --norc --noprofile?

[some1so]

Hello

I tested this again. I'm using Apple Terminal.app, so I went into settings and changed the shell to "/opt/local/bin/bash --noprofile --norc". I then created a new window, and tested, and got a good result ("Command not found").

I then renamed my local bash_profile and bashrc files to get them out of the way, and set Terminal.app default shell to "/opt/local/bin/bash", opened a new window and tested again, and got a bad result (the same Swift error).

Next, I switch Terminal.app default shell to use the system default (/bin/bash). Open a new window and test. Good result. I then start a new session in the shell by executing "/opt/local/bin/bash", and test again. Good result.

So the only way to cause the error is to set Terminal.app to use "/opt/local/bin/bash".

Maybe of interest - when I am in a session and getting the error, if I use "Ctrl-X Ctrl-V" to print the shell version, and then test again, I get a good result. Somehow that clears whatever is causing the error.

[kickingvegas (Charles Choi)]

FWIW, I'm seeing the same issue. Apparently setting Terminal.app to use /opt/local/bin/bash will emit the following message for unknown commands entered.

$ jsdf
objc[53830]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called.
objc[53830]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in the fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
Abort trap: 6

[raimue (Rainer Müller)]

This must be coming from libc/libSystem and not from bash itself. You might be able to use export OBJC_DISABLE_INITIALIZE_FORK_SAFETY=YES as a workaround (although I am not sure if this actually works when running as a login shell in Terminal.app).

Does this problem also occur when bash is started as login shell with /opt/local/bin/bash -l? That might make debugging easier as we would be able to attach dtruss to see which system calls are responsible for this behavior.

[raimue (Rainer Müller)]

It might actually still be the same problem as comment:ticket:41248:13. Can you check whether LANG, LC_MESSAGES and LC_ALL are all unset in your environment?

[some1so]

Hello, here are the results - I start off using /bin/bash and then start a login shell with the macports version.

~ $ echo $LANG, $LC_MESSAGES, $LC_ALL
en_US.UTF-8, ,
~ $ /opt/local/bin/bash -l
Restored session: Tue Nov 14 17:41:17 PST 2023
~ $ echo $LANG, $LC_MESSAGES, $LC_ALL
en_US.UTF-8, ,
~ $ derp
objc[7696]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called.
objc[7696]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in the fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
Abort trap: 6
~ $ export OBJC_DISABLE_INITIALIZE_FORK_SAFETY=YES
~ $ derp
objc[7697]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called.
objc[7697]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in the fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
Abort trap: 6
~ $ echo $OBJC_DISABLE_INITIALIZE_FORK_SAFETY
YES

[cculianu (Calin Culianu)]

I have the same exact issue.

Any ideas? Should I rebuild bash from source?

[kickingvegas (Charles Choi)]

Still seeing this issue with GNU bash, version 5.2.26(1)-release (aarch64-apple-darwin23.2.0)

[DarrenStone (Darren Stone)]

Call stack:

Thread 0 Crashed::  Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib        	       0x1864de72c __abort_with_payload + 8
1   libsystem_kernel.dylib        	       0x186503f88 abort_with_payload_wrapper_internal + 104
2   libsystem_kernel.dylib        	       0x186503f20 abort_with_reason + 32
3   libobjc.A.dylib               	       0x186179484 _objc_fatalv(unsigned long long, unsigned long long, char const*, char*) + 128
4   libobjc.A.dylib               	       0x186179404 _objc_fatal(char const*, ...) + 44
5   libobjc.A.dylib               	       0x18615fc1c performForkChildInitialize(objc_class*, objc_class*) + 400
6   libobjc.A.dylib               	       0x186146390 initializeNonMetaClass + 572
7   libobjc.A.dylib               	       0x1861461f0 initializeNonMetaClass + 156
8   libobjc.A.dylib               	       0x1861461f0 initializeNonMetaClass + 156
9   libobjc.A.dylib               	       0x186163304 initializeAndMaybeRelock(objc_class*, objc_object*, locker_mixin<lockdebug::lock_mixin<objc_lock_base_t>>&, bool) + 164
10  libobjc.A.dylib               	       0x186145dc4 lookUpImpOrForward + 892
11  libobjc.A.dylib               	       0x186145764 _objc_msgSend_uncached + 68
12  libswiftCore.dylib            	       0x1961145e0 type metadata accessor for __StringStorage + 24
13  libswiftCore.dylib            	       0x195eb63e8 String._bridgeToObjectiveCImpl() + 156
14  Foundation                    	       0x187911930 specialized LocaleCache.preferredLanguages(forCurrentUser:) + 76
15  Foundation                    	       0x187afd428 @objc static NSLocale._preferredLanguagesForCurrentUser(_:) + 44
16  CoreFoundation                	       0x1865ebbe4 CFLocaleCopyPreferredLanguages + 28
17  libintl.8.dylib               	       0x100ad93dc _libintl_language_preferences_default + 68
18  libintl.8.dylib               	       0x100ad7d40 libintl_dcigettext + 812
19  bash                          	       0x10057123c execute_disk_command + 696
20  bash                          	       0x10056c870 execute_simple_command + 3688
21  bash                          	       0x10056a8e0 execute_command_internal + 3056
22  bash                          	       0x100569c7c execute_command + 96
23  bash                          	       0x10055a77c reader_loop + 728
24  bash                          	       0x100559238 main + 4788
25  dyld                          	       0x1861910e0 start + 2360

This has been a long-standing problem. See this comment: comment:ticket:41248:13

However, the problem occurs all of the time, not just when LANG is unset.

Bash uses 'gettext' to generate localized error messages. If a child process calls 'gettext' before the parent process has initialzied the localization library then the child process will crash.

You can work around the problem by forcing the parent process to generate a localized error message. Once that is done, child processes can produce localized text correctly. For example, you can type ";" on a single line to generate a localized error message from the parent bash process:

$ foo
objc[10554]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called.
objc[10554]: +[__SwiftNativeNSStringBase initialize] may have been in progress in another thread when fork() was called. We cannot safely call it or ignore it in the fork() child process. Crashing instead. Set a breakpoint on objc_initializeAfterForkError to debug.
Abort trap: 6
$ ;
-bash: syntax error near unexpected token `;'
$ foo
-bash: foo: command not found

[msbit (Tom Sullivan)]

This appears to be happening always with macOS 14, whereas it didn't happen on macOS 13.

Would it be worth adding the --with-included-gettext configure argument? This seems to "fix" the issue for me when compiled locally.

[ryandesign (Ryan Carsten Schmidt)]

Is it the included gettext that's the problem? The bash port declares a dependency on the gettext port, so I would expect it to be using that gettext, not the included one.

[msbit (Tom Sullivan)]

Is it the included gettext that's the problem?

Using the in-tree intl implementation(1) by passing --with-included-gettext to ./configure doesn't exhibit this problem. My guess is that it doesn't call into any Apple provided APIs (in this case CFLocaleCopyPreferredLanguages as shown in @DarrenStone's back trace) which have the specific check around Objc initialize during fork.

so I would expect it to be using that gettext, not the included one

Yep, it appears to be, the distributed binary looks something like this:

$ otool -L $(which bash)
/opt/local/bin/bash:
	/opt/local/lib/libncurses.6.dylib (compatibility version 6.0.0, current version 6.0.0)
	/opt/local/lib/libintl.8.dylib (compatibility version 12.0.0, current version 12.0.0)
	/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 1858.112.0)
	/opt/local/lib/libiconv.2.dylib (compatibility version 9.0.0, current version 9.1.0)
	/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1311.100.3)

(1) ​https://git.savannah.gnu.org/cgit/bash.git/tree/lib/intl?h=bash-5.2

[bradleyCPA (B. Holder)]

That seems like it would work until they rev the in-tree gettext in the next release. After which it would once again be broken. ​https://git.savannah.gnu.org/cgit/bash.git/tree/lib/intl?h=bash-5.3-testing

[msbit (Tom Sullivan)]

That seems like it would work until they rev the in-tree gettext in the next release. After which it would once again be broken.

Is there anything specifically in that branch that would cause that? I'm able to get a failing build by invoking:

LDFLAGS=-L/opt/local/lib ./configure

and a working build by invoking:

LDFLAGS=-L/opt/local/lib ./configure --with-included-gettext

on each of the following branches/tags

• devel
• bash-5.3-alpha
• bash-5.3-testing

Test script:

#!/usr/bin/env bash

set -eu

git status --porcelain --ignored=matching | grep '^!!' | awk '{print $2}' | xargs rm -rf
git checkout -- .

LDFLAGS=-L/opt/local/lib ./configure --silent ${@}
make --jobs 12 --silent
otool -L bash
./bash -l

[kencu (Ken)]

the presumption is that the gettext included in bash is old, and once it is updated to be as new as the one currently in macports, it will exhibit the same error.

[ednl (Ewoud Dronkert)]

Same for me on an M1 with everything up-to-date: Sonoma 14.4.1, port 2.9.3, bash 5.2.26_0, gettext 0.22.5_0. Hopefully a definitive fix can be decided upon.

[ryandesign (Ryan Carsten Schmidt)]

Replying to msbit:

Is it the included gettext that's the problem?

Using the in-tree intl implementation(1) by passing --with-included-gettext to ./configure doesn't exhibit this problem.

Sorry, I misread your suggestion. I thought you were suggesting --without-included-gettext which didn't make sense to me.

Using --with-included-gettext would be undesirable. We want to use MacPorts gettext which should be the most up-to-date and thus contain the most bug fixes. If there is a bug in this latest gettext that's causing this, let's fix it, or rather, report it to the developers of gettext so they can fix it and release a new version and we can then update to it.

[bradleyCPA (B. Holder)]

I suppose the problem lies at the intersection of gettext() usage after fork() and before exec() in bash [execute_cmd.c in bash source] in combination with setlocale() function replacement [libintl.h, "define setlocale libintl_setlocale", gettext-runtime/intl/setlocale.c in gettext source]. It seems that there must be some scenario or scenarios where calling into Apple's APIs in the gettext-provided setlocale() replacement spawns a thread so that after the fork() [in bash] calling back into Apple's APIs using CFLocaleCopyPreferredLanguages (or similar) in the gettext() call results in the forked process terminating.

[msbit (Tom Sullivan)]

Replying to kencu:

the presumption is that the gettext included in bash is old, and once it is updated to be as new as the one currently in macports, it will exhibit the same error.

👍

[msbit (Tom Sullivan)]

Replying to ryandesign:

Replying to msbit:

Is it the included gettext that's the problem?

Using the in-tree intl implementation(1) by passing --with-included-gettext to ./configure doesn't exhibit this problem.

Sorry, I misread your suggestion. I thought you were suggesting --without-included-gettext which didn't make sense to me.

Using --with-included-gettext would be undesirable. We want to use MacPorts gettext which should be the most up-to-date and thus contain the most bug fixes. If there is a bug in this latest gettext that's causing this, let's fix it, or rather, report it to the developers of gettext so they can fix it and release a new version and we can then update to it.

👍

[msbit (Tom Sullivan)]

Replying to bradleyCPA:

I suppose the problem lies at the intersection of gettext() usage after fork() and before exec() in bash [execute_cmd.c in bash source] in combination with setlocale() function replacement [libintl.h, "define setlocale libintl_setlocale", gettext-runtime/intl/setlocale.c in gettext source]. It seems that there must be some scenario or scenarios where calling into Apple's APIs in the gettext-provided setlocale() replacement spawns a thread so that after the fork() [in bash] calling back into Apple's APIs using CFLocaleCopyPreferredLanguages (or similar) in the gettext() call results in the forked process terminating.

From what I can tell, this is what happens:

int main() {
  // via bash`reset_locale_vars > libintl.8.dylib`libintl_setlocale > .`_libintl_locale_name_default
  CFPreferencesCopyAppValue(CFSTR("AppleLocale"), kCFPreferencesCurrentApplication);
  if (fork() == 0) {
    // via bash`execute_disk_command > libintl.8.dylib`libintl_gettext > .`libintl_dcgettext > .`libintl_dcigettext > .`guess_category_value > .`_libintl_language_preferences_default
    CFLocaleCopyPreferredLanguages();
  }
}

CFPreferencesCopyAppValue spins up a thread (one of the GCD worker threads) which triggers this forced crash whenever an objc +initialize method is called (as occurs within CFLocaleCopyPreferredLanguages).

[bradleyCPA (B. Holder)]

That looks pretty spot on to me. The larger problem is bash is now forking [and doing unsafe things -- ​https://www.man7.org/linux/man-pages/man2/fork.2.html -- in the forked process before exec()] while multithreaded which is a barmy idea and probably a completely unintended side-effect of relying on gnu gettext.

[jamesderlin (James D. Lin)]

For anyone else looking for a simple, automatic workaround:

The workaround from comment:11 (running ; first) worked for me, but it's not obvious how to suppress the error message so that it could be done automatically in from .bashrc. The same thing applies to the workaround from ​https://trac.macports.org/ticket/41248#comment:11 (running trap [a-z] first). However, understanding that you just need to get bash to print a localized message (not necessarily an error message), generating the help to most bash builtins also should work (e.g. cd --help, set --help, etc.), and those get printed to stdout which can be easily redirected to /dev/null. In my .bashrc, I use: help help > /dev/null (along with a comment referencing this bug).

[i0ntempest]

Replying to jamesderlin:

For anyone else looking for a simple, automatic workaround:

The workaround from comment:11 (running ; first) worked for me, but it's not obvious how to suppress the error message so that it could be done automatically in from .bashrc. The same thing applies to the workaround from ​https://trac.macports.org/ticket/41248#comment:11 (running trap [a-z] first). However, understanding that you just need to get bash to print a localized message (not necessarily an error message), generating the help to most bash builtins also should work (e.g. cd --help, set --help, etc.), and those get printed to stdout which can be easily redirected to /dev/null. In my .bashrc, I use: help help > /dev/null (along with a comment referencing this bug).

Does not seem to work for me. I put the command into .profile but I still get a crash when I run a nonexistent command. Running the command in the shell after initialization does work though.

[bradleyCPA (B. Holder)]

You want ​https://git.savannah.gnu.org/cgit/bash.git/commit/?h=devel&id=b3d8c8a4e7c5417d986f93f646ea740cb13c08d7. Specifically, the init_notfound_str junk, probably, I haven't tested. I could never reproduce anyway.