Using Your Own Archives

MacPorts verifies archives when archivemode is enabled, making the signing archives a requirement. This page will serve as a guide showing how to do this.

Create Keys

The first step (also detailed in ${prefix}/etc/macports/pubkeys.conf​) is to make keys to sign your archives.

To distribute archives of your own, you need a key pair generated like so:

cd ~/.ssh
openssl genrsa -des3 -out privkey.pem 2048
openssl rsa -in privkey.pem -pubout -out pubkey.pem

Be sure to add this key to your ssh keyring or you'll get asked for the password each time it's used. Another alternative is it save it as an unencrypted key, like so:

openssl rsa -in privkey.pem -out privkey.pem.bare

Sign Packages

Then sign the archives like this:

openssl dgst -ripemd160 -sign privkey.pem -out archive.tbz2.rmd160 archive.tbz2

If you have lots of archives to sign, this can be done via a for loop in your shell. Here I use bash:

cd /archive/repository
for i in */*tbz2; do openssl dgst -ripemd160 -sign ~/.ssh/privkey.pem.bare -out $i.rmd160 $i; done

Note that this saves the signatures along side the archives, by simply using .rmd160 as a suffix. This is what MacPorts expects.

Configure MacPorts

Now we need to add your key to MacPorts. This is done in two places:

• save copy of public key
• add path to this copy in pubkeys.conf

I used ${prefix}/etc/macports/snc.pub for simplicity.

Try It

Your archives are now signed and MacPorts should be configured to recognize your signature. Try it out!

Maintenance of Archive Repository

Each day (really, every 30 minutes) new ports arrive and several are updated. Rather than rebuilding the whole tree you'll want to go after the ones with changes. This is easily achieved by the find command.

cd ${prefix}/var/macports/sources/rsync.macports.org/release/ports
sudo port selfupdate
find . -name Portfile -mtime -1d  | while read i
do
    sudo port archive `dirname ${i#*/*/}`
done

As you build archives, you'll eventually come across an instance where you're upgrading an older version. Keeping these outdated archives around might be less than ideal. We can wipe them out as we build the updates in the repository, checking the versions against what's current.

cd /archive/repository
sudo port selfupdate
for i in *
do
    port -q info --index --version `basename $i` | while read j
    do
        ls "$i" | grep -v "$j" | while read k
        do
            sudo rm -v "$i/$k"
        done
    done
done

This can also be accomplished using rsync between a build box and a web server. After syncing you'd run a sign_archives routine described above.

for i in ${prefix}/var/macports/software/*
do
    port -q info --index --version `basename $i` | while read j
    do
        rsync -az --delete --filter "P *$j*" "$i" snc@tazamahal.com:/var/www/macports/
    done
done
ssh snc@tazamahal.com sign_archives.sh