[[PageOutline]] [wiki:howto <- Back to the HOWTO section] = About PHP = #about PHP is a popular server-side scripting language frequently used to develop web sites or command line scripts. For information on integrating Apache with MySQL and PHP, see [wiki:howto/MAMP MAMP]. = Versions = #versions MacPorts includes several versions of PHP. You can install any or all of these versions simultaneously, though it is expected that you will only need to install one of them. * '''php80''': PHP v8.0.x. This is the latest stable version. Security support until 26 Nov 2023. * '''php74''': PHP v7.4.x. This is an older stable version. Active support until 28 Nov 2021. Security support until 28 Nov 2022. * '''php73''': PHP v7.3.x. This is an older stable version. Active support until 6 Dec 2020. Security support until 6 Dec 2021. * '''php72''': PHP v7.2.x. This version reached [https://www.php.net/eol.php end of life] on 30 Nov 2020 and is therefore not recommended. * '''php71''': PHP v7.1.x. This version reached [https://www.php.net/eol.php end of life] on 1 Dec 2019 and is therefore not recommended. * '''php70''': PHP v7.0.x. This version reached [https://www.php.net/eol.php end of life] on 10 Jan 2019 and is therefore not recommended. * '''php56''': PHP v5.6.x. This version reached [https://www.php.net/eol.php end of life] on 31 Dec 2018 and is therefore not recommended. * '''php55''': PHP v5.5.x. This version reached [https://www.php.net/eol.php end of life] in 2016 and is therefore not recommended. * '''php54''': PHP v5.4.x. This version reached [https://www.php.net/eol.php end of life] in 2015 and is therefore not recommended. * '''php53''': PHP v5.3.x. This version reached [https://www.php.net/eol.php end of life] in 2014 and is therefore not recommended. * '''php52''': PHP v5.2.x. This version reached [https://www.php.net/eol.php end of life] in 2011 and is therefore not recommended. This page shows how to install and use the php80 family of ports, but you can use another version if you prefer; all of these ports use a similar directory layout. = Step 1: Install PHP SAPIs = #install PHP comes in several Server APIs (SAPIs). You can install any or all of these that you need: ||=SAPI =||=Port =||=Install command =|| || Command line || php80 || `sudo port install php80` || || Apache 2 module || php80-apache2handler || `sudo port install php80-apache2handler` || || FastCGI || php80-cgi || `sudo port install php80-cgi` || || FastCGI Process Manager || php80-fpm || `sudo port install php80-fpm` || = Step 2: Install PHP Modules = #modules The SAPI ports contain the core PHP features, but there are many optional features available in separate ports, some of which you may want to install as well. Use `port search php80` to see all the ports that are available. Installing a PHP module automatically makes it available to all PHP SAPIs of the same PHP version. For example, if you with to interact with a database server, here are some of the choices that exist: ||=Database server =||=Port =||=Install command =|| || MSSQL || php80-mssql || `sudo port install php80-mssql` || || MySQL, MariaDB, Percona || php80-mysql || `sudo port install php80-mysql` || || ODBC || php80-odbc || `sudo port install php80-odbc` || || Oracle || php80-oracle || `sudo port install php80-oracle` || || PostgreSQL || php80-postgresql || `sudo port install php80-postgresql` || || SQLite || php80-sqlite || `sudo port install php80-sqlite` || = Step 3: PHP Configuration file setup = #configuration Set up your PHP configuration files. For development purposes use: {{{ $ cd /opt/local/etc/php80 $ sudo cp php.ini-development php.ini }}} or for a production server: {{{ $ cd /opt/local/etc/php80 $ sudo cp php.ini-production php.ini }}} then make changes to that newly created php.ini file - ''/opt/local/etc/php80/php.ini'' = Step 4: Install phpMyAdmin = #phpmyadmin Use MacPorts to install the latest version of `phpMyAdmin`. {{{ $ sudo port install phpmyadmin }}} '''phpMyAdmin''' must be configured before it can be used. We do this in Step 5 below. = Step 5: Visit [[howto/MAMP]] for integration information = [[howto/MAMP]] must be consulted next for modifications to the Apache Configuration file to enable PHP and MySQL. = Trouble shoot = If by some reason the server still doesn't interpret PHP files (i.e. your web client tries to download them) it means the PHP configurations, as described at [[howto/MAMP#job1]], are not taking effect. Typically, the file ''"Include etc/apache2/extra/mod_php80.conf"'' - is not being processed; the file is missing; or the contents incorrect. That file contains the two "AddType" lines below. == Verify your config file again! == Verify any changes you have made to the config file: /opt/local/etc/apache2/httpd.conf - The most common problem is that the files in the "extra" directory are not "readable" All files in that directory should be "-rw-r--r--" {{{ $ /opt/local/sbin/apachectl -t }}} This will return either "Syntax OK" or a specific line by line error listing. The typical error message: ''"Could not open configuration file /opt/local/etc/apache2/extra/httpd-mod_php80.conf: Permission denied"'' After correcting any config errors and saving the updated config file, simply run: {{{ $ sudo port unload apache2 }}} to stop apache (even though it is not running) and then start it using {{{ $ sudo port load apache2 }}} to start it again. If the above fails to cause php files to be interpreted, you can edit the Apache httpd.conf file itself again and search for the block: {{{ }}} And then add the following two lines before the end of that block. {{{ AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps }}} Then restart the server. As a last check, reboot and verify that everything has autostarted and is running (i.e., repeat the above tests). = Step 6: Configure phpMyAdmin = Edit the phpMyAdmin configuration file at ''/opt/local/www/phpmyadmin/config.inc.php''. \\ A sample configuration file is installed at /opt/local/www/phpmyadmin/config.sample.inc.php. Consult the documentation on your server at ''"/opt/local/www/phpmyadmin/doc/html/config.html"'' NOTE: This option expects ''"/opt/local/www/phpmyadmin/doc/html"'' to be accessible under "." This can be accomplished by {{{ $ cd $ ln -s /opt/local/www/phpmyadmin/doc/html/ phpmyadmin-doc }}} and then accessing ''http:///phpmyadmin-doc/'' Finally, you need to set up the `phpMyAdmin` configuration to access MySQL. First create the config.inc.php file: {{{ $ cd /opt/local/www/phpmyadmin/ $ sudo cp config.sample.inc.php config.inc.php }}} This will create a file `config.inc.php` in the `phpMyAdmin` directory. \\ Next, Edit that file, and locate the line: {{{ $cfg['Servers'][$i]['auth_type'] = 'cookie'; // Authentication method (config, http or cookie based)? - default is Cookie. }}} It will be right at the beginning in the section labeled: "/* Authentication type */" Change the value from 'cookie' to 'config'. You will need to add the following two lines immediately after it. {{{ $cfg['Servers'][$i]['user'] = 'root'; // MySQL user $cfg['Servers'][$i]['password'] = ''; // MySQL password (only needed with auth_type = 'config') }}} Where ' ' is an empty password; fill it with your MySQL root password. \\ '''NOTE:''' You should change the 'auth_type' from 'config' to 'cookie' or 'httpd' so that you do not need to provide the password you selected for the MySQL root user in the 'password' option. (I.e. leaving it in plain text in this config file.) \\ However, as this is to simply get you "up-and-running," details for configuring those two authorization options are not given here. Details on "Using Authentication Modes" can be found at "''https://docs.phpmyadmin.net/en/latest/setup.html#using-authentication-modes''." To check your phpMyAdmin installation, point your browser to http://localhost/phpmyadmin and verify that phpMyAdmin loads and can access your database (by providing a username and password, depending on the authentication method you selected). = Step 6: Install pmadb = #pmadb Some consider the installation of pmadb "optional." \\ However, phpMyAdmin will flag the fact that it is missing and therefore certain features are not functional, with the message: {{{ The phpMyAdmin configuration storage is not completely configured, some extended features have been deactivated. Find out why. Or alternately go to 'Operations' tab of any database to set it up there. }}} For additional features provided by pmadb (http://wiki.phpmyadmin.net/pma/pmadb), first run {{{ $ mysql -u root -p < /opt/local/www/phpmyadmin/sql/create_tables.sql }}} Next: create a file: ''mysql_phpMyAdmin_pmaSetup.sql'' - containing the following SQL code: (change the 'pmapass' to your password) - this is a one-time use scratch file so you can place it anywhere and delete it after use. (It is not included with the phpMyAdmin distribution.) '''Note:''' In MySQL versions beginning with 5.6.7, there is no mysql.host table, so you will need to edit the SQL code below: (i) in lines 9 and 17 delete "Host," from the the GRANT SELECT commands; and (ii) delete the line 16 command "GRANT SELECT ON mysql.host TO 'pma'@'localhost';". {{{ -- HOW TO USE THIS FILE (with MacPorts installation) -- mysql -u root -p < /opt/local/www/phpmyadmin/examples/create_tables.sql -- mysql -u root -p < mysql_phpMyAdmin_pmaSetup.sql CREATE USER 'pma'@'localhost' IDENTIFIED BY 'pmapass'; GRANT USAGE ON mysql.* TO 'pma'@'localhost' IDENTIFIED BY 'pmapass'; GRANT SELECT ( Host, User, Select_priv, Insert_priv, Update_priv, Delete_priv, Create_priv, Drop_priv, Reload_priv, Shutdown_priv, Process_priv, File_priv, Grant_priv, References_priv, Index_priv, Alter_priv, Show_db_priv, Super_priv, Create_tmp_table_priv, Lock_tables_priv, Execute_priv, Repl_slave_priv, Repl_client_priv ) ON mysql.user TO 'pma'@'localhost'; GRANT SELECT ON mysql.db TO 'pma'@'localhost'; GRANT SELECT ON mysql.host TO 'pma'@'localhost'; GRANT SELECT (Host, Db, User, Table_name, Table_priv, Column_priv) ON mysql.tables_priv TO 'pma'@'localhost'; -- Privileges GRANT SELECT, INSERT, DELETE, UPDATE ON `phpmyadmin`.* TO 'pma'@localhost; }}} Then run this SQL to setup the pma 'controluser' Finally, verify that the config file, at ''/opt/local/www/phpmyadmin/config.inc.php'', is like this:\\ '''Note:''' The database name is ''pma underscore underscore'' -- two underscores! {{{ /* User used to manipulate with storage */ // $cfg['Servers'][$i]['controlhost'] = ''; // $cfg['Servers'][$i]['controlport'] = ''; $cfg['Servers'][$i]['controluser'] = 'pma'; $cfg['Servers'][$i]['controlpass'] = 'pmapass'; /* Storage database and tables */ // $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; // $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark'; // $cfg['Servers'][$i]['relation'] = 'pma__relation'; // $cfg['Servers'][$i]['table_info'] = 'pma__table_info'; // $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords'; // $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages'; // $cfg['Servers'][$i]['column_info'] = 'pma__column_info'; // $cfg['Servers'][$i]['history'] = 'pma__history'; // $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs'; // $cfg['Servers'][$i]['tracking'] = 'pma__tracking'; // $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig'; // $cfg['Servers'][$i]['recent'] = 'pma__recent'; // $cfg['Servers'][$i]['favorite'] = 'pma__favorite'; // $cfg['Servers'][$i]['users'] = 'pma__users'; // $cfg['Servers'][$i]['usergroups'] = 'pma__usergroups'; // $cfg['Servers'][$i]['navigationhiding'] = 'pma__navigationhiding'; // $cfg['Servers'][$i]['savedsearches'] = 'pma__savedsearches'; // $cfg['Servers'][$i]['central_columns'] = 'pma__central_columns'; }}}