| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main ncurses 5.7_0 exists in the ports tree |
|---|
| 4 | :debug:main ncurses 5.7_0 is the latest installed |
|---|
| 5 | :debug:main ncurses 5.7_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 9 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 16 | :debug:main Requested variant postgresql84 is not provided by port ncurses. |
|---|
| 17 | :debug:main Requested variant no_gcc43 is not provided by port ncurses. |
|---|
| 18 | :debug:main Requested variant ipv6 is not provided by port ncurses. |
|---|
| 19 | :debug:main Requested variant x11 is not provided by port ncurses. |
|---|
| 20 | :debug:main Requested variant postgresql83 is not provided by port ncurses. |
|---|
| 21 | :debug:main Requested variant quartz is not provided by port ncurses. |
|---|
| 22 | :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
|---|
| 23 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 24 | :debug:main ncursesw 5.7_0 exists in the ports tree |
|---|
| 25 | :debug:main ncursesw 5.7_0 is the latest installed |
|---|
| 26 | :debug:main ncursesw 5.7_0 is active |
|---|
| 27 | :debug:main Merging existing variants '' into variants |
|---|
| 28 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 29 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 30 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 31 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 32 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 33 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 34 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 35 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 36 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 37 | :debug:main Requested variant postgresql84 is not provided by port ncursesw. |
|---|
| 38 | :debug:main Requested variant no_gcc43 is not provided by port ncursesw. |
|---|
| 39 | :debug:main Requested variant ipv6 is not provided by port ncursesw. |
|---|
| 40 | :debug:main Requested variant x11 is not provided by port ncursesw. |
|---|
| 41 | :debug:main Requested variant postgresql83 is not provided by port ncursesw. |
|---|
| 42 | :debug:main Requested variant quartz is not provided by port ncursesw. |
|---|
| 43 | :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
|---|
| 44 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 45 | :debug:main xorg-libX11 1.3.4_0 exists in the ports tree |
|---|
| 46 | :debug:main xorg-libX11 1.3.4_0 is the latest installed |
|---|
| 47 | :debug:main xorg-libX11 1.3.4_0 is active |
|---|
| 48 | :debug:main Merging existing variants '' into variants |
|---|
| 49 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 50 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 51 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 52 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 53 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 56 | :debug:main adding the default universal variant |
|---|
| 57 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 58 | :debug:main Requested variant postgresql84 is not provided by port xorg-libX11. |
|---|
| 59 | :debug:main Requested variant no_gcc43 is not provided by port xorg-libX11. |
|---|
| 60 | :debug:main Requested variant ipv6 is not provided by port xorg-libX11. |
|---|
| 61 | :debug:main Requested variant x11 is not provided by port xorg-libX11. |
|---|
| 62 | :debug:main Requested variant postgresql83 is not provided by port xorg-libX11. |
|---|
| 63 | :debug:main Requested variant quartz is not provided by port xorg-libX11. |
|---|
| 64 | :debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 |
|---|
| 65 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 66 | :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree |
|---|
| 67 | :debug:main xorg-libXdmcp 1.0.3_0 is the latest installed |
|---|
| 68 | :debug:main xorg-libXdmcp 1.0.3_0 is active |
|---|
| 69 | :debug:main Merging existing variants '' into variants |
|---|
| 70 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 71 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 72 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 73 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 74 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | :debug:main adding the default universal variant |
|---|
| 77 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 78 | :debug:main Requested variant postgresql84 is not provided by port xorg-libXdmcp. |
|---|
| 79 | :debug:main Requested variant no_gcc43 is not provided by port xorg-libXdmcp. |
|---|
| 80 | :debug:main Requested variant ipv6 is not provided by port xorg-libXdmcp. |
|---|
| 81 | :debug:main Requested variant x11 is not provided by port xorg-libXdmcp. |
|---|
| 82 | :debug:main Requested variant postgresql83 is not provided by port xorg-libXdmcp. |
|---|
| 83 | :debug:main Requested variant quartz is not provided by port xorg-libXdmcp. |
|---|
| 84 | :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
|---|
| 85 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 86 | :debug:main xorg-libXau 1.0.5_0 exists in the ports tree |
|---|
| 87 | :debug:main xorg-libXau 1.0.5_0 is the latest installed |
|---|
| 88 | :debug:main xorg-libXau 1.0.5_0 is active |
|---|
| 89 | :debug:main Merging existing variants '' into variants |
|---|
| 90 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 91 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 92 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 93 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 94 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 95 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 96 | :debug:main adding the default universal variant |
|---|
| 97 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 98 | :debug:main Requested variant postgresql84 is not provided by port xorg-libXau. |
|---|
| 99 | :debug:main Requested variant no_gcc43 is not provided by port xorg-libXau. |
|---|
| 100 | :debug:main Requested variant ipv6 is not provided by port xorg-libXau. |
|---|
| 101 | :debug:main Requested variant x11 is not provided by port xorg-libXau. |
|---|
| 102 | :debug:main Requested variant postgresql83 is not provided by port xorg-libXau. |
|---|
| 103 | :debug:main Requested variant quartz is not provided by port xorg-libXau. |
|---|
| 104 | :debug:main No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 |
|---|
| 105 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 106 | :debug:main xorg-xproto 7.0.17_0 exists in the ports tree |
|---|
| 107 | :debug:main xorg-xproto 7.0.17_0 is the latest installed |
|---|
| 108 | :debug:main xorg-xproto 7.0.17_0 is active |
|---|
| 109 | :debug:main Merging existing variants '' into variants |
|---|
| 110 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 111 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 112 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 113 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 114 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 115 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 116 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 117 | :debug:main Requested variant postgresql84 is not provided by port xorg-xproto. |
|---|
| 118 | :debug:main Requested variant no_gcc43 is not provided by port xorg-xproto. |
|---|
| 119 | :debug:main Requested variant ipv6 is not provided by port xorg-xproto. |
|---|
| 120 | :debug:main Requested variant x11 is not provided by port xorg-xproto. |
|---|
| 121 | :debug:main Requested variant postgresql83 is not provided by port xorg-xproto. |
|---|
| 122 | :debug:main Requested variant quartz is not provided by port xorg-xproto. |
|---|
| 123 | :debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 |
|---|
| 124 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 125 | :debug:main xorg-kbproto 1.0.4_0 exists in the ports tree |
|---|
| 126 | :debug:main xorg-kbproto 1.0.4_0 is the latest installed |
|---|
| 127 | :debug:main xorg-kbproto 1.0.4_0 is active |
|---|
| 128 | :debug:main Merging existing variants '' into variants |
|---|
| 129 | :debug:main new fully merged portvariants: no_gcc43 + postgresql84 + ipv6 - x11 + quartz - postgresql83 - |
|---|
| 130 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 131 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 132 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 133 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 134 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 135 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 136 | :debug:main Requested variant postgresql84 is not provided by port xorg-kbproto. |
|---|
| 137 | :debug:main Requested variant no_gcc43 is not provided by port xorg-kbproto. |
|---|
| 138 | :debug:main Requested variant ipv6 is not provided by port xorg-kbproto. |
|---|
| 139 | :debug:main Requested variant x11 is not provided by port xorg-kbproto. |
|---|
| 140 | :debug:main Requested variant postgresql83 is not provided by port xorg-kbproto. |
|---|
| 141 | :debug:main Requested variant quartz is not provided by port xorg-kbproto. |
|---|
| 142 | :debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
|---|
| 143 | :msg:main ---> Computing dependencies for libcaca:msg:main |
|---|
| 144 | :debug:main Searching for dependency: ncurses |
|---|
| 145 | :debug:main Found Dependency: receipt exists for ncurses |
|---|
| 146 | :debug:main Searching for dependency: xorg-libX11 |
|---|
| 147 | :debug:main Found Dependency: receipt exists for xorg-libX11 |
|---|
| 148 | :debug:main Executing org.macports.main (libcaca) |
|---|
| 149 | :debug:main Skipping completed org.macports.fetch (libcaca) |
|---|
| 150 | :debug:main Skipping completed org.macports.checksum (libcaca) |
|---|
| 151 | :debug:main setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 152 | :debug:main Skipping completed org.macports.extract (libcaca) |
|---|
| 153 | :debug:main Skipping completed org.macports.patch (libcaca) |
|---|
| 154 | :msg:main ---> Configuring libcaca |
|---|
| 155 | :debug:main Using compiler 'Mac OS X gcc 4.2' |
|---|
| 156 | :debug:configure configure phase started at Thu Jun 24 13:57:48 EDT 2010 |
|---|
| 157 | :debug:configure Executing org.macports.configure (libcaca) |
|---|
| 158 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' |
|---|
| 159 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/libcaca-0.9" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --disable-win32 --disable-conio --disable-slang --disable-imlib2 --disable-doc --enable-ncurses --enable-x11' |
|---|
| 160 | :info:configure checking build system type... i686-apple-darwin10.4.0 |
|---|
| 161 | :info:configure checking host system type... i686-apple-darwin10.4.0 |
|---|
| 162 | :info:configure checking target system type... i686-apple-darwin10.4.0 |
|---|
| 163 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 164 | :info:configure checking whether build environment is sane... yes |
|---|
| 165 | :info:configure checking for gawk... no |
|---|
| 166 | :info:configure checking for mawk... no |
|---|
| 167 | :info:configure checking for nawk... no |
|---|
| 168 | :info:configure checking for awk... awk |
|---|
| 169 | :info:configure checking whether make sets $(MAKE)... yes |
|---|
| 170 | :info:configure checking for style of include used by make... GNU |
|---|
| 171 | :info:configure checking for gcc... /usr/bin/gcc-4.2 |
|---|
| 172 | :info:configure checking for C compiler default output file name... a.out |
|---|
| 173 | :info:configure checking whether the C compiler works... yes |
|---|
| 174 | :info:configure checking whether we are cross compiling... no |
|---|
| 175 | :info:configure checking for suffix of executables... |
|---|
| 176 | :info:configure checking for suffix of object files... o |
|---|
| 177 | :info:configure checking whether we are using the GNU C compiler... yes |
|---|
| 178 | :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes |
|---|
| 179 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ANSI C... none needed |
|---|
| 180 | :info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3 |
|---|
| 181 | :info:configure checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together... yes |
|---|
| 182 | :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
|---|
| 183 | :info:configure checking for ranlib... ranlib |
|---|
| 184 | :info:configure checking for an ANSI C-conforming const... yes |
|---|
| 185 | :info:configure checking for inline... inline |
|---|
| 186 | :info:configure checking return type of signal handlers... void |
|---|
| 187 | :info:configure checking for egrep... grep -E |
|---|
| 188 | :info:configure checking for ANSI C header files... yes |
|---|
| 189 | :info:configure checking for sys/types.h... yes |
|---|
| 190 | :info:configure checking for sys/stat.h... yes |
|---|
| 191 | :info:configure checking for stdlib.h... yes |
|---|
| 192 | :info:configure checking for string.h... yes |
|---|
| 193 | :info:configure checking for memory.h... yes |
|---|
| 194 | :info:configure checking for strings.h... yes |
|---|
| 195 | :info:configure checking for inttypes.h... yes |
|---|
| 196 | :info:configure checking for stdint.h... yes |
|---|
| 197 | :info:configure checking for unistd.h... yes |
|---|
| 198 | :info:configure checking signal.h usability... yes |
|---|
| 199 | :info:configure checking signal.h presence... yes |
|---|
| 200 | :info:configure checking for signal.h... yes |
|---|
| 201 | :info:configure checking sys/ioctl.h usability... yes |
|---|
| 202 | :info:configure checking sys/ioctl.h presence... yes |
|---|
| 203 | :info:configure checking for sys/ioctl.h... yes |
|---|
| 204 | :info:configure checking sys/time.h usability... yes |
|---|
| 205 | :info:configure checking sys/time.h presence... yes |
|---|
| 206 | :info:configure checking for sys/time.h... yes |
|---|
| 207 | :info:configure checking for inttypes.h... (cached) yes |
|---|
| 208 | :info:configure checking endian.h usability... no |
|---|
| 209 | :info:configure checking endian.h presence... no |
|---|
| 210 | :info:configure checking for endian.h... no |
|---|
| 211 | :info:configure checking for unistd.h... (cached) yes |
|---|
| 212 | :info:configure checking for signal... yes |
|---|
| 213 | :info:configure checking for ioctl... yes |
|---|
| 214 | :info:configure checking for vsnprintf... yes |
|---|
| 215 | :info:configure checking for getenv... yes |
|---|
| 216 | :info:configure checking for putenv... yes |
|---|
| 217 | :info:configure checking for strcasecmp... yes |
|---|
| 218 | :info:configure checking for usleep... yes |
|---|
| 219 | :info:configure checking for gettimeofday... yes |
|---|
| 220 | :info:configure checking for Sleep... yes |
|---|
| 221 | :info:configure checking for sin in -lm... yes |
|---|
| 222 | :info:configure checking for X... libraries , headers |
|---|
| 223 | :info:configure checking for XOpenDisplay in -lX11... no |
|---|
| 224 | :info:configure checking X11/XKBlib.h usability... yes |
|---|
| 225 | :info:configure checking X11/XKBlib.h presence... yes |
|---|
| 226 | :info:configure checking for X11/XKBlib.h... yes |
|---|
| 227 | :info:configure configure: error: cannot find X11 development files |
|---|
| 228 | :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/work/libcaca-0.9" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --disable-win32 --disable-conio --disable-slang --disable-imlib2 --disable-doc --enable-ncurses --enable-x11 " returned error 1 |
|---|
| 229 | :error:configure Target org.macports.configure returned: configure failure: shell command failed |
|---|
| 230 | :debug:configure Backtrace: configure failure: shell command failed |
|---|
| 231 | while executing |
|---|
| 232 | "$procedure $targetname" |
|---|
| 233 | :info:configure Warning: the following items did not execute (for libcaca): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 234 | :notice:configure Log for libcaca is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/main.log |
|---|
