gimp2 2.6.4 configure can't find XML::Parser

[calle.kabo@…]

I got an error when upgrading to gimp2 2.6.4.

checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool

So I did:

$ sudo cpan
cpan> install XML::Parser

Which installed nicely. But I still get the same error from macports!

$ sudo port -d upgrade gimp2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gimp2 2.6.4_0 exists in the ports tree
DEBUG: gimp2 2.6.3_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gegl 0.0.22_1 exists in the ports tree
DEBUG: gegl 0.0.22_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is installed
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/w3m
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: w3m 0.5.2_1 exists in the ports tree
DEBUG: w3m 0.5.2_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boehmgc
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: boehmgc 7.1_0 exists in the ports tree
DEBUG: boehmgc 7.1_0 is installed
DEBUG: No need to upgrade! boehmgc 7.1_0 >= boehmgc 7.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_2 exists in the ports tree
DEBUG: zlib 1.2.3_2 is installed
DEBUG: No need to upgrade! zlib 1.2.3_2 >= zlib 1.2.3_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: openssl 0.9.8i_0 exists in the ports tree
DEBUG: openssl 0.9.8i_0 is installed
DEBUG: No need to upgrade! openssl 0.9.8i_0 >= openssl 0.9.8i_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 is installed
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_3 exists in the ports tree
DEBUG: gettext 0.17_3 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.12_0 exists in the ports tree
DEBUG: libiconv 1.12_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.3_0 exists in the ports tree
DEBUG: gperf 3.0.3_0 is installed
DEBUG: No need to upgrade! gperf 3.0.3_0 >= gperf 3.0.3_0
DEBUG: No need to upgrade! libiconv 1.12_0 >= libiconv 1.12_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is installed
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_3 >= gettext 0.17_3
DEBUG: No need to upgrade! w3m 0.5.2_1 >= w3m 0.5.2_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/babl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: babl 0.0.22_0 exists in the ports tree
DEBUG: babl 0.0.22_0 is installed
DEBUG: No need to upgrade! babl 0.0.22_0 >= babl 0.0.22_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gtk2 2.14.5_0 exists in the ports tree
DEBUG: gtk2 2.14.5_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gtk-doc 1.11_0 exists in the ports tree
DEBUG: gtk-doc 1.11_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: rarian 0.8.1_0 exists in the ports tree
DEBUG: rarian 0.8.1_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: intltool 0.40.5_0 exists in the ports tree
DEBUG: intltool 0.40.5_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-common 2.24.0_1 exists in the ports tree
DEBUG: gnome-common 2.24.0_1 is installed
DEBUG: No need to upgrade! gnome-common 2.24.0_1 >= gnome-common 2.24.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: perl5 is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Searching for dependency: perl5
DEBUG: Didn't find receipt, going to depspec regex for: perl5
DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$
DEBUG: perl5 installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
DEBUG: p5-xml-parser 2.36_0 is installed
DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
DEBUG: No need to upgrade! intltool 0.40.5_0 >= intltool 0.40.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: getopt 1.1.4_1 exists in the ports tree
DEBUG: getopt 1.1.4_1 is installed
DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.24_1 exists in the ports tree
DEBUG: libxslt 1.1.24_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.2_1 exists in the ports tree
DEBUG: libxml2 2.7.2_1 is installed
DEBUG: No need to upgrade! libxml2 2.7.2_1 >= libxml2 2.7.2_1
DEBUG: No need to upgrade! libxslt 1.1.24_1 >= libxslt 1.1.24_1
DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-doc-utils 0.14.1_0 exists in the ports tree
DEBUG: gnome-doc-utils 0.14.1_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-hashlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-hashlib 2.5.4_0 exists in the ports tree
DEBUG: py25-hashlib 2.5.4_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python25 2.5.4_0 exists in the ports tree
DEBUG: python25 2.5.4_0 is installed
DEBUG: No need to upgrade! python25 2.5.4_0 >= python25 2.5.4_0
DEBUG: No need to upgrade! py25-hashlib 2.5.4_0 >= py25-hashlib 2.5.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-libxml2 2.6.21_1 exists in the ports tree
DEBUG: py25-libxml2 2.6.21_1 is installed
DEBUG: No need to upgrade! py25-libxml2 2.6.21_1 >= py25-libxml2 2.6.21_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml 5.0_0 exists in the ports tree
DEBUG: docbook-xml 5.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
DEBUG: docbook-xml-4.1.2 4.1.2_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xmlcatmgr 2.2_1 exists in the ports tree
DEBUG: xmlcatmgr 2.2_1 is installed
DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree
DEBUG: docbook-xml-4.2 4.2_0 is installed
DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree
DEBUG: docbook-xml-4.3 4.3_0 is installed
DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree
DEBUG: docbook-xml-4.4 4.4_0 is installed
DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree
DEBUG: docbook-xml-4.5 4.5_0 is installed
DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree
DEBUG: docbook-xml-5.0 5.0_0 is installed
DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xsl 1.74.0_0 exists in the ports tree
DEBUG: docbook-xsl 1.74.0_0 is installed
DEBUG: No need to upgrade! docbook-xsl 1.74.0_0 >= docbook-xsl 1.74.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: iso-codes 3.5_0 exists in the ports tree
DEBUG: iso-codes 3.5_0 is installed
DEBUG: No need to upgrade! iso-codes 3.5_0 >= iso-codes 3.5_0
DEBUG: No need to upgrade! gnome-doc-utils 0.14.1_0 >= gnome-doc-utils 0.14.1_0
DEBUG: No need to upgrade! gtk-doc 1.11_0 >= gtk-doc 1.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cairo 1.8.6_1 exists in the ports tree
DEBUG: cairo 1.8.6_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpixman 0.12.0_1 exists in the ports tree
DEBUG: libpixman 0.12.0_1 is installed
DEBUG: No need to upgrade! libpixman 0.12.0_1 >= libpixman 0.12.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.4_4 exists in the ports tree
DEBUG: xrender 0.9.4_4 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.14_1 exists in the ports tree
DEBUG: xorg-xproto 7.0.14_1 is installed
DEBUG: No need to upgrade! xorg-xproto 7.0.14_1 >= xorg-xproto 7.0.14_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.9.3_0 exists in the ports tree
DEBUG: xorg-renderproto 0.9.3_0 is installed
DEBUG: No need to upgrade! xorg-renderproto 0.9.3_0 >= xorg-renderproto 0.9.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: xorg-libX11 is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Searching for dependency: xorg-libX11
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.dylib regex: ^libX11\.dylib$
DEBUG: xorg-libX11 installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.1.5_1 exists in the ports tree
DEBUG: xorg-libX11 1.1.5_1 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! xorg-libX11 1.1.5_1 >= xorg-libX11 1.1.5_1
DEBUG: No need to upgrade! xrender 0.9.4_4 >= xrender 0.9.4_4
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.6.0_1 exists in the ports tree
DEBUG: fontconfig 2.6.0_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.7_3 exists in the ports tree
DEBUG: freetype 2.3.7_3 is installed
DEBUG: No need to upgrade! freetype 2.3.7_3 >= freetype 2.3.7_3
DEBUG: No need to upgrade! fontconfig 2.6.0_1 >= fontconfig 2.6.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.34_0 exists in the ports tree
DEBUG: libpng 1.2.34_0 is installed
DEBUG: No need to upgrade! libpng 1.2.34_0 >= libpng 1.2.34_0
DEBUG: No need to upgrade! cairo 1.8.6_1 >= cairo 1.8.6_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.18.3_0 exists in the ports tree
DEBUG: glib2 2.18.3_0 is installed
DEBUG: No need to upgrade! glib2 2.18.3_0 >= glib2 2.18.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 6b_3 exists in the ports tree
DEBUG: jpeg 6b_3 is installed
DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.8.2_2 exists in the ports tree
DEBUG: tiff 3.8.2_2 is installed
DEBUG: No need to upgrade! tiff 3.8.2_2 >= tiff 3.8.2_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jasper 1.900.1_2 exists in the ports tree
DEBUG: jasper 1.900.1_2 is installed
DEBUG: No need to upgrade! jasper 1.900.1_2 >= jasper 1.900.1_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: atk 1.24.0_0 exists in the ports tree
DEBUG: atk 1.24.0_0 is installed
DEBUG: No need to upgrade! atk 1.24.0_0 >= atk 1.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pango 1.22.4_0 exists in the ports tree
DEBUG: pango 1.22.4_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.13_0 exists in the ports tree
DEBUG: Xft2 2.1.13_0 is installed
DEBUG: No need to upgrade! Xft2 2.1.13_0 >= Xft2 2.1.13_0
DEBUG: No need to upgrade! pango 1.22.4_0 >= pango 1.22.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: xorg-libXi is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-libXi.
DEBUG: Requested variant i386 is not provided by port xorg-libXi.
DEBUG: Requested variant macosx is not provided by port xorg-libXi.
DEBUG: Searching for dependency: xorg-libXi
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXi
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXi.6.dylib regex: ^libXi\.6\.dylib$
DEBUG: xorg-libXi installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXi 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXi 1.2.0_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! xorg-libXi 1.2.0_0 >= xorg-libXi 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: xorg-libXrandr is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
DEBUG: Searching for dependency: xorg-libXrandr
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXrandr








DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXrandr.2.dylib regex: ^libXrandr\.2\.dylib$
DEBUG: xorg-libXrandr installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXrandr 1.2.3_0 exists in the ports tree
DEBUG: xorg-libXrandr 1.2.3_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! xorg-libXrandr 1.2.3_0 >= xorg-libXrandr 1.2.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: xorg-libXcursor is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
DEBUG: Searching for dependency: xorg-libXcursor
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXcursor
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXcursor.1.dylib regex: ^libXcursor\.1\.dylib$
DEBUG: xorg-libXcursor installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXcursor 1.1.9_0 exists in the ports tree
DEBUG: xorg-libXcursor 1.1.9_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! xorg-libXcursor 1.1.9_0 >= xorg-libXcursor 1.1.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: xorg-libXinerama is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
DEBUG: Searching for dependency: xorg-libXinerama
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXinerama
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXinerama.1.dylib regex: ^libXinerama\.1\.dylib$
DEBUG: xorg-libXinerama installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXinerama 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXinerama 1.0.3_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! xorg-libXinerama 1.0.3_0 >= xorg-libXinerama 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: shared-mime-info 0.51_0 exists in the ports tree
DEBUG: shared-mime-info 0.51_0 is installed
DEBUG: No need to upgrade! shared-mime-info 0.51_0 >= shared-mime-info 0.51_0
DEBUG: No need to upgrade! gtk2 2.14.5_0 >= gtk2 2.14.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/lua
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lua 5.1.4_0 exists in the ports tree
DEBUG: lua 5.1.4_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 5.2.012_1 exists in the ports tree
DEBUG: readline 5.2.012_1 is installed
DEBUG: No need to upgrade! readline 5.2.012_1 >= readline 5.2.012_1

DEBUG: No need to upgrade! lua 5.1.4_0 >= lua 5.1.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: openexr 1.6.1_1 exists in the ports tree
DEBUG: openexr 1.6.1_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.10.2_0 exists in the ports tree
DEBUG: automake 1.10.2_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.63_0 exists in the ports tree
DEBUG: autoconf 2.63_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.12_1 exists in the ports tree
DEBUG: m4 1.4.12_1 is installed
DEBUG: No need to upgrade! m4 1.4.12_1 >= m4 1.4.12_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0 is installed
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.63_0 >= autoconf 2.63_0
DEBUG: No need to upgrade! automake 1.10.2_0 >= automake 1.10.2_0
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ilmbase 1.0.1_2 exists in the ports tree
DEBUG: ilmbase 1.0.1_2 is installed
DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libopenraw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libopenraw 0.0.5_0 exists in the ports tree
DEBUG: libopenraw 0.0.5_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: boost 1.37.0_0 exists in the ports tree
DEBUG: boost 1.37.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost-jam
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: boost-jam 3.1.16_0 exists in the ports tree
DEBUG: boost-jam 3.1.16_0 is installed
DEBUG: No need to upgrade! boost-jam 3.1.16_0 >= boost-jam 3.1.16_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmake 3.81_0 exists in the ports tree
DEBUG: gmake 3.81_0 is installed
DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_1 exists in the ports tree
DEBUG: bzip2 1.0.5_1 is installed
DEBUG: No need to upgrade! bzip2 1.0.5_1 >= bzip2 1.0.5_1
DEBUG: No need to upgrade! boost 1.37.0_0 >= boost 1.37.0_0
DEBUG: No need to upgrade! libopenraw 0.0.5_0 >= libopenraw 0.0.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: librsvg 2.22.3_0 exists in the ports tree
DEBUG: librsvg 2.22.3_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libcroco
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libcroco 0.6.1_1 exists in the ports tree
DEBUG: libcroco 0.6.1_1 is installed
DEBUG: No need to upgrade! libcroco 0.6.1_1 >= libcroco 0.6.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgsf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgsf 1.14.10_1 exists in the ports tree
DEBUG: libgsf 1.14.10_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-vfs
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-vfs 2.24.0_0 exists in the ports tree
DEBUG: gnome-vfs 2.24.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gconf 2.24.0_0 exists in the ports tree
DEBUG: gconf 2.24.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.2.10_0 exists in the ports tree
DEBUG: dbus 1.2.10_0 is installed
DEBUG: No need to upgrade! dbus 1.2.10_0 >= dbus 1.2.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus-glib 0.78_0 exists in the ports tree
DEBUG: dbus-glib 0.78_0 is installed
DEBUG: No need to upgrade! dbus-glib 0.78_0 >= dbus-glib 0.78_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: orbit2 2.14.16_0 exists in the ports tree
DEBUG: orbit2 2.14.16_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidl 0.8.12_0 exists in the ports tree
DEBUG: libidl 0.8.12_0 is installed
DEBUG: No need to upgrade! libidl 0.8.12_0 >= libidl 0.8.12_0
DEBUG: No need to upgrade! orbit2 2.14.16_0 >= orbit2 2.14.16_0
DEBUG: No need to upgrade! gconf 2.24.0_0 >= gconf 2.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/desktop-file-utils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: desktop-file-utils 0.15_1 exists in the ports tree
DEBUG: desktop-file-utils 0.15_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: popt 1.14_0 exists in the ports tree
DEBUG: popt 1.14_0 is installed
DEBUG: No need to upgrade! popt 1.14_0 >= popt 1.14_0
DEBUG: No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-utils 0.15_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-mime-data
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-mime-data 2.18.0_3 exists in the ports tree
DEBUG: gnome-mime-data 2.18.0_3 is installed
DEBUG: No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data 2.18.0_3
DEBUG: No need to upgrade! gnome-vfs 2.24.0_0 >= gnome-vfs 2.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonobo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libbonobo 2.24.0_0 exists in the ports tree
DEBUG: libbonobo 2.24.0_0 is installed
DEBUG: No need to upgrade! libbonobo 2.24.0_0 >= libbonobo 2.24.0_0
DEBUG: No need to upgrade! libgsf 1.14.10_1 >= libgsf 1.14.10_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
DEBUG: libart_lgpl 2.3.20_0 is installed
DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
DEBUG: No need to upgrade! librsvg 2.22.3_0 >= librsvg 2.22.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsdl 1.2.13_2 exists in the ports tree
DEBUG: libsdl 1.2.13_2 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
DEBUG: XFree86 is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant i386 is not provided by port XFree86.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant macosx provides macosx
DEBUG: Searching for dependency: XFree86
DEBUG: Didn't find receipt, going to depspec regex for: XFree86
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib regex: ^libX11\.6\.dylib$
DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib regex: ^libX11\.6\.dylib$
DEBUG: XFree86 installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: XFree86 4.7.0_0 exists in the ports tree
DEBUG: XFree86 4.7.0_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! XFree86 4.7.0_0 >= XFree86 4.7.0_0
DEBUG: No need to upgrade! libsdl 1.2.13_2 >= libsdl 1.2.13_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: graphviz 2.20.3_0 exists in the ports tree
DEBUG: graphviz 2.20.3_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-fonts
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
DEBUG: urw-fonts 1.0.7pre44_0 is installed
DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts 1.0.7pre44_0
DEBUG: No need to upgrade! graphviz 2.20.3_0 >= graphviz 2.20.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ffmpeg 15261_1 exists in the ports tree
DEBUG: ffmpeg 15261_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
DEBUG: subversion is *not* installed by MacPorts
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port subversion.
DEBUG: Requested variant i386 is not provided by port subversion.
DEBUG: Requested variant macosx is not provided by port subversion.
DEBUG: Searching for dependency: subversion
DEBUG: Didn't find receipt, going to depspec regex for: subversion
DEBUG: Found Dependency: path: /usr/bin filename: svn regex: ^svn$
DEBUG: subversion installed outside the MacPorts system
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: subversion 1.5.5_0 exists in the ports tree
DEBUG: subversion 1.5.5_0 is installed
DEBUG: Not following dependencies
DEBUG: No need to upgrade! subversion 1.5.5_0 >= subversion 1.5.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/a52dec
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: a52dec 0.7.4_0 exists in the ports tree
DEBUG: a52dec 0.7.4_0 is installed
DEBUG: No need to upgrade! a52dec 0.7.4_0 >= a52dec 0.7.4_0
DEBUG: No need to upgrade! ffmpeg 15261_1 >= ffmpeg 15261_1

DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libspiro
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libspiro 20071029_0 exists in the ports tree
DEBUG: libspiro 20071029_0 is installed
DEBUG: No need to upgrade! libspiro 20071029_0 >= libspiro 20071029_0
DEBUG: No need to upgrade! gegl 0.0.22_1 >= gegl 0.0.22_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: aalib 1.4rc5_3 exists in the ports tree
DEBUG: aalib 1.4rc5_3 is installed
DEBUG: No need to upgrade! aalib 1.4rc5_3 >= aalib 1.4rc5_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl 7.19.2_0 exists in the ports tree
DEBUG: curl 7.19.2_0 is installed
DEBUG: No need to upgrade! curl 7.19.2_0 >= curl 7.19.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libexif 0.6.17_0 exists in the ports tree
DEBUG: libexif 0.6.17_0 is installed
DEBUG: No need to upgrade! libexif 0.6.17_0 >= libexif 0.6.17_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnomeui 2.24.0_0 exists in the ports tree
DEBUG: libgnomeui 2.24.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonoboui
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libbonoboui 2.24.0_0 exists in the ports tree
DEBUG: libbonoboui 2.24.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libglade2 2.6.3_0 exists in the ports tree
DEBUG: libglade2 2.6.3_0 is installed
DEBUG: No need to upgrade! libglade2 2.6.3_0 >= libglade2 2.6.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomecanvas
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnomecanvas 2.20.1.1_1 exists in the ports tree
DEBUG: libgnomecanvas 2.20.1.1_1 is installed
DEBUG: No need to upgrade! libgnomecanvas 2.20.1.1_1 >= libgnomecanvas 2.20.1.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnome
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnome 2.24.1_1 exists in the ports tree
DEBUG: libgnome 2.24.1_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: esound 0.2.41_1 exists in the ports tree
DEBUG: esound 0.2.41_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: audiofile 0.2.6_2 exists in the ports tree
DEBUG: audiofile 0.2.6_2 is installed
DEBUG: No need to upgrade! audiofile 0.2.6_2 >= audiofile 0.2.6_2
DEBUG: No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
DEBUG: No need to upgrade! libgnome 2.24.1_1 >= libgnome 2.24.1_1
DEBUG: No need to upgrade! libbonoboui 2.24.0_0 >= libbonoboui 2.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-icon-theme
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-icon-theme 2.24.0_0 exists in the ports tree
DEBUG: gnome-icon-theme 2.24.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hicolor-icon-theme 0.10_0 exists in the ports tree
DEBUG: hicolor-icon-theme 0.10_0 is installed
DEBUG: No need to upgrade! hicolor-icon-theme 0.10_0 >= hicolor-icon-theme 0.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/icon-naming-utils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: icon-naming-utils 0.8.7_0 exists in the ports tree
DEBUG: icon-naming-utils 0.8.7_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-simple
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-simple 2.18_0 exists in the ports tree
DEBUG: p5-xml-simple 2.18_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-namespacesupport
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-namespacesupport 1.09_0 exists in the ports tree
DEBUG: p5-xml-namespacesupport 1.09_0 is installed
DEBUG: No need to upgrade! p5-xml-namespacesupport 1.09_0 >= p5-xml-namespacesupport 1.09_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-sax
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-sax 0.96_1 exists in the ports tree
DEBUG: p5-xml-sax 0.96_1 is installed
DEBUG: No need to upgrade! p5-xml-sax 0.96_1 >= p5-xml-sax 0.96_1
DEBUG: No need to upgrade! p5-xml-simple 2.18_0 >= p5-xml-simple 2.18_0
DEBUG: No need to upgrade! icon-naming-utils 0.8.7_0 >= icon-naming-utils 0.8.7_0
DEBUG: No need to upgrade! gnome-icon-theme 2.24.0_0 >= gnome-icon-theme 2.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-keyring
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-keyring 2.24.1_0 exists in the ports tree
DEBUG: gnome-keyring 2.24.1_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgcrypt 1.4.3_0 exists in the ports tree
DEBUG: libgcrypt 1.4.3_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgpg-error 1.7_0 exists in the ports tree
DEBUG: libgpg-error 1.7_0 is installed
DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0
DEBUG: No need to upgrade! libgcrypt 1.4.3_0 >= libgcrypt 1.4.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtasn1 1.7_0 exists in the ports tree
DEBUG: libtasn1 1.7_0 is installed
DEBUG: No need to upgrade! libtasn1 1.7_0 >= libtasn1 1.7_0
DEBUG: No need to upgrade! gnome-keyring 2.24.1_0 >= gnome-keyring 2.24.1_0
DEBUG: No need to upgrade! libgnomeui 2.24.0_0 >= libgnomeui 2.24.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmng 1.0.10_0 exists in the ports tree
DEBUG: libmng 1.0.10_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lcms 1.17_0 exists in the ports tree
DEBUG: lcms 1.17_0 is installed
DEBUG: No need to upgrade! lcms 1.17_0 >= lcms 1.17_0
DEBUG: No need to upgrade! libmng 1.0.10_0 >= libmng 1.0.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libwmf 0.2.8.4_0 exists in the ports tree
DEBUG: libwmf 0.2.8.4_0 is installed
DEBUG: No need to upgrade! libwmf 0.2.8.4_0 >= libwmf 0.2.8.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: poppler 0.10.2_1 exists in the ports tree
DEBUG: poppler 0.10.2_1 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: openjpeg 1.3_2 exists in the ports tree
DEBUG: openjpeg 1.3_2 is installed
DEBUG: No need to upgrade! openjpeg 1.3_2 >= openjpeg 1.3_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler-data
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: poppler-data 0.2.1_0 exists in the ports tree
DEBUG: poppler-data 0.2.1_0 is installed
DEBUG: No need to upgrade! poppler-data 0.2.1_0 >= poppler-data 0.2.1_0
DEBUG: No need to upgrade! poppler 0.10.2_1 >= poppler 0.10.2_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-gtk 2.12.1_0 exists in the ports tree
DEBUG: py25-gtk 2.12.1_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-cairo 1.8.0_0 exists in the ports tree
DEBUG: py25-cairo 1.8.0_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-numpy 1.2.1_0 exists in the ports tree
DEBUG: py25-numpy 1.2.1_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fftw-3 3.2_1 exists in the ports tree
DEBUG: fftw-3 3.2_1 is installed
DEBUG: No need to upgrade! fftw-3 3.2_1 >= fftw-3 3.2_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-nose 0.10.4_0 exists in the ports tree
DEBUG: py25-nose 0.10.4_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-setuptools 0.6c9_0 exists in the ports tree
DEBUG: py25-setuptools 0.6c9_0 is installed
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-zlib 2.5.4_0 exists in the ports tree
DEBUG: py25-zlib 2.5.4_0 is installed
DEBUG: No need to upgrade! py25-zlib 2.5.4_0 >= py25-zlib 2.5.4_0
DEBUG: No need to upgrade! py25-setuptools 0.6c9_0 >= py25-setuptools 0.6c9_0
DEBUG: No need to upgrade! py25-nose 0.10.4_0 >= py25-nose 0.10.4_0
DEBUG: No need to upgrade! py25-numpy 1.2.1_0 >= py25-numpy 1.2.1_0
DEBUG: No need to upgrade! py25-cairo 1.8.0_0 >= py25-cairo 1.8.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-gobject 2.14.2_0 exists in the ports tree
DEBUG: py25-gobject 2.14.2_0 is installed
DEBUG: No need to upgrade! py25-gobject 2.14.2_0 >= py25-gobject 2.14.2_0
DEBUG: No need to upgrade! py25-gtk 2.12.1_0 >= py25-gtk 2.12.1_0
DEBUG: variants to install {} darwin_9 x11
DEBUG: available variants are : darwin_7 darwin_9 no_python dbus gvfs help_browser quartz x11 no_x11 universal
DEBUG: variant darwin_9 is present in gimp2 2.6.4_0
DEBUG: variant x11 is present in gimp2 2.6.4_0
DEBUG: new portvariants: darwin_9 + x11 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gimp2.
DEBUG: Requested variant i386 is not provided by port gimp2.
DEBUG: Requested variant macosx is not provided by port gimp2.
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: Executing variant x11 provides x11
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gegl.
DEBUG: Requested variant darwin_9 is not provided by port gegl.
DEBUG: Requested variant i386 is not provided by port gegl.
DEBUG: Requested variant x11 is not provided by port gegl.
DEBUG: Requested variant macosx is not provided by port gegl.
DEBUG: Searching for dependency: gegl
DEBUG: Found Dependency: receipt exists for gegl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port aalib.
DEBUG: Requested variant darwin_9 is not provided by port aalib.
DEBUG: Requested variant i386 is not provided by port aalib.
DEBUG: Requested variant macosx is not provided by port aalib.
DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: aalib
DEBUG: Found Dependency: receipt exists for aalib
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port curl.
DEBUG: Requested variant darwin_9 is not provided by port curl.
DEBUG: Requested variant i386 is not provided by port curl.
DEBUG: Requested variant x11 is not provided by port curl.
DEBUG: Requested variant macosx is not provided by port curl.
DEBUG: Searching for dependency: curl
DEBUG: Found Dependency: receipt exists for curl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libart_lgpl.
DEBUG: Requested variant darwin_9 is not provided by port libart_lgpl.
DEBUG: Requested variant i386 is not provided by port libart_lgpl.
DEBUG: Requested variant x11 is not provided by port libart_lgpl.
DEBUG: Requested variant macosx is not provided by port libart_lgpl.
DEBUG: Searching for dependency: libart_lgpl
DEBUG: Found Dependency: receipt exists for libart_lgpl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libexif.
DEBUG: Requested variant darwin_9 is not provided by port libexif.
DEBUG: Requested variant i386 is not provided by port libexif.
DEBUG: Requested variant x11 is not provided by port libexif.
DEBUG: Requested variant macosx is not provided by port libexif.
DEBUG: Searching for dependency: libexif
DEBUG: Found Dependency: receipt exists for libexif
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libgnomeui.
DEBUG: Requested variant darwin_9 is not provided by port libgnomeui.
DEBUG: Requested variant i386 is not provided by port libgnomeui.
DEBUG: Requested variant x11 is not provided by port libgnomeui.
DEBUG: Requested variant macosx is not provided by port libgnomeui.
DEBUG: Searching for dependency: libgnomeui
DEBUG: Found Dependency: receipt exists for libgnomeui
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libmng.
DEBUG: Requested variant darwin_9 is not provided by port libmng.
DEBUG: Requested variant i386 is not provided by port libmng.
DEBUG: Requested variant x11 is not provided by port libmng.
DEBUG: Requested variant macosx is not provided by port libmng.
DEBUG: Searching for dependency: libmng
DEBUG: Found Dependency: receipt exists for libmng
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port librsvg.
DEBUG: Requested variant darwin_9 is not provided by port librsvg.
DEBUG: Requested variant i386 is not provided by port librsvg.
DEBUG: Requested variant x11 is not provided by port librsvg.
DEBUG: Requested variant macosx is not provided by port librsvg.
DEBUG: Searching for dependency: librsvg
DEBUG: Found Dependency: receipt exists for librsvg
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libwmf.
DEBUG: Requested variant darwin_9 is not provided by port libwmf.
DEBUG: Requested variant i386 is not provided by port libwmf.
DEBUG: Requested variant macosx is not provided by port libwmf.

DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: libwmf
DEBUG: Found Dependency: receipt exists for libwmf
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
DEBUG: Requested variant darwin_9 is not provided by port p5-xml-parser.
DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
DEBUG: Requested variant x11 is not provided by port p5-xml-parser.
DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
DEBUG: Searching for dependency: p5-xml-parser
DEBUG: Found Dependency: receipt exists for p5-xml-parser
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port poppler.
DEBUG: Requested variant darwin_9 is not provided by port poppler.
DEBUG: Requested variant i386 is not provided by port poppler.
DEBUG: Requested variant x11 is not provided by port poppler.
DEBUG: Requested variant macosx is not provided by port poppler.
DEBUG: Searching for dependency: poppler
DEBUG: Found Dependency: receipt exists for poppler
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-gtk.
DEBUG: Requested variant i386 is not provided by port py25-gtk.
DEBUG: Requested variant x11 is not provided by port py25-gtk.
DEBUG: Requested variant macosx is not provided by port py25-gtk.
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: Searching for dependency: py25-gtk
DEBUG: Found Dependency: receipt exists for py25-gtk
DEBUG: Executing org.macports.main (gimp2)
--->  Fetching gimp2
DEBUG: Executing proc-pre-org.macports.fetch-fetch-0
DEBUG: Executing org.macports.fetch (gimp2)
--->  Verifying checksum(s) for gimp2
DEBUG: Executing org.macports.checksum (gimp2)
--->  Checksumming gimp-2.6.4.tar.bz2
DEBUG: Correct (md5) checksum for gimp-2.6.4.tar.bz2
DEBUG: Correct (sha1) checksum for gimp-2.6.4.tar.bz2
DEBUG: Correct (rmd160) checksum for gimp-2.6.4.tar.bz2
DEBUG: setting option extract.cmd to /opt/local/bin/bzip2
--->  Extracting gimp2
DEBUG: Executing org.macports.extract (gimp2)
--->  Extracting gimp-2.6.4.tar.bz2
DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work" && /opt/local/bin/bzip2 -dc /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2 | /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (gimp2)
--->  Applying patches to gimp2
--->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2/files/patch-etc-gimprc.diff
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4" && patch -p0'
patching file etc/gimprc
DEBUG: Executing proc-post-org.macports.patch-patch-0
--->  Configuring gimp2
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing proc-pre-org.macports.configure-configure-0
DEBUG: Executing org.macports.configure (gimp2)
DEBUG: Environment: CFLAGS='-O2' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2' MACOSX_DEPLOYMENT_TARGET='10.5' CPP='/usr/bin/cpp-4.0' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib' FCFLAGS='-O2' OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c' PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2' FFLAGS='-O2' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4" && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x --without-dbus --without-hal --without-alsa --without-gvfs --without-webkit'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... /usr/bin/gcc-4.0
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.0 accepts -g... yes
checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of /usr/bin/gcc-4.0... gcc3
checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes
checking build system type... i386-apple-darwin9.6.0
checking host system type... i386-apple-darwin9.6.0
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no
checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -p
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... /usr/bin/cpp-4.0
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... yes
checking whether /usr/bin/g++-4.0 accepts -g... yes
checking dependency style of /usr/bin/g++-4.0... gcc3
checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no

checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 196608
checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common
checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin9.6.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no
checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common
checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes
checking if /usr/bin/g++-4.0 static flag -static works... no
checking if /usr/bin/g++-4.0 supports -c -o file.o... yes
checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin9.6.0 dyld
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking dependency style of /usr/bin/gcc-4.0... gcc3
checking whether to enable maintainer-specific portions of Makefiles... no
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for target architecture... i386-apple-darwin9.6.0
checking for some Win32 platform... no
checking for native Win32... no
checking for library containing strerror... none required
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking whether to turn on debugging... no
checking whether to turn on profiling... no
checking whether /usr/bin/gcc-4.0 understands -Wdeclaration-after-statement... yes
checking whether /usr/bin/gcc-4.0 understands -Wmissing-prototypes... yes
checking whether /usr/bin/gcc-4.0 understands -Wmissing-declarations... yes
checking whether /usr/bin/gcc-4.0 understands -Winit-self... yes
checking whether /usr/bin/gcc-4.0 understands -Wpointer-arith... yes
checking whether /usr/bin/gcc-4.0 understands -Wold-style-definition... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking whether time.h and sys/time.h may both be included... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/times.h usability... yes
checking sys/times.h presence... yes
checking for sys/times.h... yes
checking for sys/wait.h... (cached) yes
checking for unistd.h... (cached) yes
checking for pid_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for working alloca.h... yes
checking for alloca... yes
checking for difftime... yes
checking for mmap... yes
checking whether binary relocation support should be enabled... no
checking for _NL_MEASUREMENT_MEASUREMENT... no
checking whether NLS is requested... yes
checking for intltool >= 0.35.5... 0.40.5 found
checking for intltool-update... /opt/local/bin/intltool-update
checking for intltool-merge... /opt/local/bin/intltool-merge
checking for intltool-extract... /opt/local/bin/intltool-extract
checking for xgettext... /opt/local/bin/xgettext
checking for msgmerge... /opt/local/bin/msgmerge
checking for msgfmt... /opt/local/bin/msgfmt
checking for gmsgfmt... /opt/local/bin/msgfmt
checking for perl... /opt/local/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4" && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x --without-dbus --without-hal --without-alsa --without-gvfs --without-webkit " returned error 1
Command output: checking for sys/param.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/times.h usability... yes
checking sys/times.h presence... yes
checking for sys/times.h... yes
checking for sys/wait.h... (cached) yes
checking for unistd.h... (cached) yes
checking for pid_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for working alloca.h... yes
checking for alloca... yes
checking for difftime... yes
checking for mmap... yes
checking whether binary relocation support should be enabled... no
checking for _NL_MEASUREMENT_MEASUREMENT... no
checking whether NLS is requested... yes
checking for intltool >= 0.35.5... 0.40.5 found
checking for intltool-update... /opt/local/bin/intltool-update
checking for intltool-merge... /opt/local/bin/intltool-merge
checking for intltool-extract... /opt/local/bin/intltool-extract
checking for xgettext... /opt/local/bin/xgettext
checking for msgmerge... /opt/local/bin/msgmerge
checking for msgfmt... /opt/local/bin/msgfmt
checking for gmsgfmt... /opt/local/bin/msgfmt
checking for perl... /opt/local/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool

Warning: the following items did not execute (for gimp2): org.macports.destroot org.macports.configure org.macports.build
DEBUG: invalid command name "::ui_init"
    while executing
"::ui_init $priority $prefix $channels $message"
    ("uplevel" body line 2)
    invoked from within
"uplevel 1 $body"
Error: Unable to upgrade port: 1

[dbevans (David B. Evans)]

I got an error when upgrading to gimp2 2.6.4.

checking for XML::Parser... configure: error: XML::Parser perl module is
required for intltool

I tried rebuilding gimp2 this morning but was unable to reproduce this problem.

So I did:

$ sudo cpan
cpan> install XML::Parser

This is unnecessary (and perhaps not desireable) as XML::Parser is provided by port p5-xml-parser which is declared as a dependency by the gimp2 port. Probably best to install perl modules with MacPorts rather than CPAN if they are available to avoid conflicts.

If fact, the output you submitted says that this port is installed:

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-parser
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
 DEBUG: p5-xml-parser 2.36_0 is installed
 DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0

So there is potentially some problem with your perl configuration or the installation of p5-xml-parser

Try the following command (this is the test configure uses)

$ /opt/local/bin/perl -e "require XML::Parser"

This should complete silently without any error but is apparently not doing so in configure's context at least. Any error output from this may point you in the proper direction.

Of course

$ which perl

should return /opt/local/bin/perl

Again, from your output, configure seems to have properly detected this.

If nothing else works you might try

$ sudo port -fn upgrade p5-xml-parser

to force p5-xml-parser to reinstall in case its installation is damaged in some way.

I thought originally that this might be a result of the recent upgrade of perl from 5.8.8 to 5.8.9 (which it looks like you have completed) but that doesn't seem to be an issue on my system (10.4.11 ppc) at least.

Sorry I can't be of more help right now but please reply with any further information you may develop.

[dbevans (David B. Evans)]

Might be perl 5.8.9 related after all. See #17803.

Can you try

/opt/local/bin/perl -e 'print join "\n", @INC, ""'

and see if the perl search path includes 5.8.8 as well as 5.8.9 directories?

[dershow]

Cc Me!

[calle.kabo@…]

Replying to devans@…:

Might be perl 5.8.9 related after all. See #17803.

Can you try

/opt/local/bin/perl -e 'print join "\n", @INC, ""'

and see if the perl search path includes 5.8.8 as well as 5.8.9 directories?

Here's the output from the above command:

/opt/local/lib/perl5/5.8.9/darwin-2level
/opt/local/lib/perl5/5.8.9
/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level
/opt/local/lib/perl5/site_perl/5.8.9
/opt/local/lib/perl5/vendor_perl/5.8.9/darwin-2level
/opt/local/lib/perl5/vendor_perl/5.8.9
/opt/local/lib/perl5/vendor_perl
.

I managed to fix it though. I noticed I only had perl 5.8 installed and not perl5. So I installed perl5. Still didn't work. Then I did what devans suggested:

$ sudo port -fn upgrade p5-xml-parser

After that it worked like a charm. Thanks!

[dbevans (David B. Evans)]

Based on these results, its likely that any other p5-* ports that were installed before the upgrade to 5.8.9 will need the same treatment to be visible.

Since it looks fairly certain that this is an upgrade problem with perl5.8 am reassigning this ticket to that ports maintainer.

[MarcusCalhoun-Lopez (Marcus Calhoun-Lopez)]

Cc Me!

[MarcusCalhoun-Lopez (Marcus Calhoun-Lopez)]

According to #17803, this was fixed in r45042.

[(none)]

Milestone Port Bugs deleted

[martin.osx@…]

Why did you close this? The problem is still there.