igraph 0.5.2 build failing

[alexsusemihl@…]

So I've been trying to get igraph to build through macports but there seems to be something wrong. I get the message below. I don't really know what it means but it seems someone had similar trouble installing ffmpegx. Tickets #16156 and #16157 i think. Any help would be welcome!

Alex Susemihl.

PS: the whole log from ports is attached

ld: absolute addressing (perhaps -mdynamic-no-pic) used in ___gmpn_add_n from /usr/local/lib/libgmp.a(add_n.o) not allowed in slidable image. Use '-read_only_relocs suppress' to enable text relocs

[alexsusemihl@…]

output of "sudo port install igraph"

[alexsusemihl@…]

Replying to alexsusemihl@…:

So I've been trying to get igraph to build through macports but there seems to be something wrong. I get the message below. I don't really know what it means but it seems someone had similar trouble installing ffmpegx. Tickets 16156 and 16157 i think. Any help would be welcome!

Alex Susemihl.

PS: the whole log from ports is attached

ld: absolute addressing (perhaps -mdynamic-no-pic) used in ___gmpn_add_n from /usr/local/lib/libgmp.a(add_n.o) not allowed in slidable image. Use '-read_only_relocs suppress' to enable text relocs

I forgot to add: I'm using mac os 10.5.7.

[nerdling (Jeremy Lavergne)]

Are you attempting to use igraph 0.5.1? The current version in MacPorts is 0.5.2 (has been for about 3 weeks).

Can you run these commands let me know if the current version fails as well: sudo port clean igraph sudo port selfupdate sudo port install igraph

Thanks

[nerdling (Jeremy Lavergne)]

You might also consider running port outdatedto see what other packages you have that are out-of-date.

[alexsusemihl@…]

Replying to snc@…:

You might also consider running port outdatedto see what other packages you have that are out-of-date.

Yes, I was weirdly building the wrong version and there were some things outdated, but i corrected both issues and somehow keep getting the same message! I cleaned igraph, selfupdated and upgraded freetype, readline, gettext and some others, but it still doesnt build, giving me the same error!

[nerdling (Jeremy Lavergne)]

Do you have the latest xcode installed? What architecture are you building upon?

Also, can you clean igraph again and send me the results of: port patch igraph port -v build igraph

Thanks!

[alexsusemihl@…]

Replying to snc@…:

Do you have the latest xcode installed? What architecture are you building upon?

Also, can you clean igraph again and send me the results of: port patch igraph port -v build igraph

Thanks!

Yes, I couldn't find what the latest version of xcode is, but software update doesnt find a more recent one. I've got version 3.1.2. port patch igraph runs with no further problems, and then building gives the same errors. The last few lines are

ld: absolute addressing (perhaps -mdynamic-no-pic) used in ___gmpn_add_n from /usr/local/lib/libgmp.a(add_n.o) not allowed in slidable image. Use '-read_only_relocs suppress' to enable text relocs
collect2: ld returned 1 exit status
make[3]: *** [libigraph.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Warning: the following items did not execute (for igraph): org.macports.build
Error: Status 1 encountered during processing.

Do you want me to attach the whole output? I could build it again then!

Thanks for the attention man! alex.

[alexsusemihl@…]

My architecture is i386. I'm on an 2.4ghz intel core 2 duo with 2 gb ram! Alex.

[nerdling (Jeremy Lavergne)]

Replying to alexsusemihl@…:

Do you want me to attach the whole output? I could build it again then!

Yes I was hoping to get the whole output from the configure and build phases.

You can find out what version of xcode you're running by xcodebuild -version:

Xcode 3.1.3
Component versions: DevToolsCore-1192.0; DevToolsSupport-1186.0
BuildVersion: 9M2736

[alexsusemihl@…]

I've got the vrsion 3.1.2:

Xcode 3.1.2
Component versions: DevToolsCore-1148.0; DevToolsSupport-1102.0
BuildVersion: 9M2621

I'll build igraph again. And then you'll get the whole picture! Should I try to find some way of updating xcode to 3.1.3?

Thanks.

[nerdling (Jeremy Lavergne)]

Replying to alexsusemihl@…:

Should I try to find some way of updating xcode to 3.1.3?

Yes, it's available ​at apple's site.

[alexsusemihl@…]

output of sudo port -v build igraph

[alexsusemihl@…]

Ok, so the output is in the attached file out.txt, not ouput.txt!

Thanks, I'm downloading the latest xcode, lets see!

Alex.

[nerdling (Jeremy Lavergne)]

Replying to alexsusemihl@…:

Ok, so the output is in the attached file out.txt, not ouput.txt!

Thanks, I'll start going through it.

Replying to alexsusemihl@…:

Thanks, I'm downloading the latest xcode, lets see!

Awesome. Remember to do a clean before you build it again. If upgrading xcode is all it takes to fix it I'll need to know so I can tell the port to require a minimum version of xcode.

[alexsusemihl@…]

Well, i tried to build igraph on my friends macbook, also running xcode 3.1.2, and it worked without any problems so that doesnt seem to be the problem. I'm still downloading the new version but I'm not counting on this to work anymore!

If there are any new ideas, i'd be glad!

Thanks, Alex.

[alexsusemihl@…]

I got it to build!! Apparently, there is some sort of hidden dependence on the gmp port. A friend of mine noticed that the libgmp.a file was being wrongfully linked. So i looked for my libgmp, noticed i didnt have that port installed. After i installed it, everything went fine!

So, problem solved. Thanks for the attention anyways!

Alex.

[nerdling (Jeremy Lavergne)]

Awesome on locating the gmp dependency. This is important to know, however and I should add it to the portfile.

[nerdling (Jeremy Lavergne)]

I added the gmp dependency in r53185. Does that appear to be the only dependency you see missing?