Opened 15 years ago

Closed 15 years ago

#21357 closed defect (fixed)

dsniff-devel 2.4b1_2 fails to build under Leopard and Tiger

Reported by: sck-nogas (Scott C. Kennedy) Owned by: ryandesign (Ryan Carsten Schmidt)
Priority: Normal Milestone:
Component: ports Version: 1.8.0
Keywords: Cc: hsivank@…, sck-nogas (Scott C. Kennedy)
Port: dsniff-devel

Description (last modified by blb@…)

On my 10.5 system, I run a port upgrade for dsniff-devel and get the error shown in debug mode below. I have already tried un-installing libnet11 and installing libnet previously....

Biko-2:distfiles sck$ sudo port -duR upgrade dsniff-devel   
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dsniff-devel 2.4b1_2 exists in the ports tree
DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is the latest installed
DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is active
DEBUG: Merging existing variants darwin_9 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port dsniff-devel.
DEBUG: Requested variant i386 is not provided by port dsniff-devel.
DEBUG: Requested variant macosx is not provided by port dsniff-devel.
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libnids 1.23_2 exists in the ports tree
DEBUG: libnids 1.23_2  is the latest installed
DEBUG: libnids 1.23_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libnids.
DEBUG: Requested variant i386 is not provided by port libnids.
DEBUG: Requested variant macosx is not provided by port libnids.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpcap 1.0.0_0 exists in the ports tree
DEBUG: libpcap 1.0.0_0  is the latest installed
DEBUG: libpcap 1.0.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libpcap.
DEBUG: Requested variant i386 is not provided by port libpcap.
DEBUG: Requested variant macosx is not provided by port libpcap.
DEBUG: No need to upgrade! libpcap 1.0.0_0 >= libpcap 1.0.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libnet11 1.1.4_0 exists in the ports tree
DEBUG: libnet11 1.1.4_0  is the latest installed
DEBUG: libnet11 1.1.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libnet11.
DEBUG: Requested variant i386 is not provided by port libnet11.
DEBUG: Requested variant macosx is not provided by port libnet11.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2  is the latest installed
DEBUG: autoconf 2.64_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1  is the latest installed
DEBUG: help2man 1.36.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0  is the latest installed
DEBUG: automake 1.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0  is the latest installed
DEBUG: libtool 2.2.6a_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel/work
--->  Computing dependencies for dsniff-devel
DEBUG: Searching for dependency: libpcap
DEBUG: Found Dependency: receipt exists for libpcap
DEBUG: Searching for dependency: libnids
DEBUG: Found Dependency: receipt exists for libnids
DEBUG: Executing org.macports.main (dsniff-devel)
DEBUG: Skipping completed org.macports.fetch (dsniff-devel)
DEBUG: Skipping completed org.macports.checksum (dsniff-devel)
DEBUG: Skipping completed org.macports.extract (dsniff-devel)
DEBUG: Skipping completed org.macports.patch (dsniff-devel)
DEBUG: Skipping completed org.macports.configure (dsniff-devel)
--->  Building dsniff-devel
DEBUG: Executing org.macports.build (dsniff-devel)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all'
/usr/bin/gcc-4.0 -L/opt/local/lib -o arpspoof arpspoof.o arp.o -lresolv  -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
/usr/bin/gcc-4.0 -L/opt/local/lib -o dnsspoof dnsspoof.o pcaputil.o -lresolv  -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
Undefined symbols:
  "_libnet_open_link_interface", referenced from:
      _main in arpspoof.o
  "_libnet_write_link_layer", referenced from:
      _arp_send in arpspoof.o
  "_libnet_host_lookup", referenced from:
      _arp_send in arpspoof.o
      _arp_send in arpspoof.o
      _arp_send in arpspoof.o
      _main in arpspoof.o
  "_libnet_name_resolve", referenced from:
      _main in arpspoof.o
      _main in arpspoof.o
  "_libnet_get_ipaddr", referenced from:
      _arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
  "_libnet_build_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_write_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_close_raw_sock", referenced from:
      _cleanup in dnsspoof.o
  "_libnet_open_raw_sock", referenced from:
      _main in dnsspoof.o
  "_libnet_open_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_close_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_host_lookup", referenced from:
      _main in dnsspoof.o
      _dns_spoof in dnsspoof.o
      _dns_spoof in dnsspoof.o
  "_libnet_get_ipaddr", referenced from:
      _main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all " returned error 2
Command output:       _main in arpspoof.o
      _main in arpspoof.o
  "_libnet_get_ipaddr", referenced from:
      _arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
  "_libnet_build_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_write_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_close_raw_sock", referenced from:
      _cleanup in dnsspoof.o
  "_libnet_open_raw_sock", referenced from:
      _main in dnsspoof.o
  "_libnet_open_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_close_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_host_lookup", referenced from:
      _main in dnsspoof.o
      _dns_spoof in dnsspoof.o
      _dns_spoof in dnsspoof.o
  "_libnet_get_ipaddr", referenced from:
      _main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all " returned error 2
Command output:       _main in arpspoof.o
      _main in arpspoof.o
  "_libnet_get_ipaddr", referenced from:
      _arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
  "_libnet_build_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_write_ip", referenced from:
      _dns_spoof in dnsspoof.o
  "_libnet_close_raw_sock", referenced from:
      _cleanup in dnsspoof.o
  "_libnet_open_raw_sock", referenced from:
      _main in dnsspoof.o
  "_libnet_open_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_close_link_interface", referenced from:
      _main in dnsspoof.o
  "_libnet_host_lookup", referenced from:
      _main in dnsspoof.o
      _dns_spoof in dnsspoof.o
      _dns_spoof in dnsspoof.o
  "_libnet_get_ipaddr", referenced from:
      _main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1

    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for dsniff-devel): org.macports.destroot org.macports.build
DEBUG: couldn't read file "/opt/local/share/macports/Tcl/darwintrace1.0/pkgIndex.tcl": no such file or directory
    while executing
"source [file join $dir pkgIndex.tcl]"
Error: Unable to upgrade port: 1

Attachments (3)

Portfile-dsniff-devel.diff (2.2 KB) - added by hsivank@… 15 years ago.
Portfile-dnsiff-devel.diff (2.2 KB) - added by hsivank@… 15 years ago.
dsniff-devel.txt.bz2 (14.7 KB) - added by ryandesign (Ryan Carsten Schmidt) 15 years ago.

Download all attachments as: .zip

Change History (15)

comment:1 Changed 15 years ago by blb@…

Description: modified (diff)

Changed 15 years ago by hsivank@…

Attachment: Portfile-dsniff-devel.diff added

comment:2 Changed 15 years ago by hsivank@…

Hello sck,

Can you :

-force uninstall of libnids, libnet and libnet11

sudo port -f uninstall libnids
...
sudo port -f uninstall libnet
...
sudo port -f uninstall libnet11

-clean dsniff-devel

sudo port clean dsniff-devel

-apply attached patch

and give me feedback !

comment:3 Changed 15 years ago by hsivank@…

Cc: hsivank@… added

Cc Me!

comment:4 Changed 15 years ago by sck-nogas (Scott C. Kennedy)

Cc: sck@… added

Cc Me!

comment:5 Changed 15 years ago by sck-nogas (Scott C. Kennedy)

Patch worked. Here is the debug output if you care.

comment:6 Changed 15 years ago by tobypeterson

Wow... please use the attachment feature for things like that. Anyway, why is the patch-sshow.c.diff specific to Snow Leopard? Seems quite harmless...

comment:7 in reply to:  6 ; Changed 15 years ago by sck-nogas (Scott C. Kennedy)

Replying to toby@…:

Wow... please use the attachment feature for things like that. Anyway, why is the patch-sshow.c.diff specific to Snow Leopard? Seems quite harmless...

Sorry, I did not realize how large the output was until after I posted. My bad.

Scott

Changed 15 years ago by hsivank@…

Attachment: Portfile-dnsiff-devel.diff added

comment:8 Changed 15 years ago by hsivank@…

Hello Toby,

You're right. I hope this one is better !

comment:9 Changed 15 years ago by dargo@…

This is months old, how come it isn't being applied to the main distribution?

Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Attachment: dsniff-devel.txt.bz2 added

comment:10 in reply to:  7 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Replying to sck@…:

Sorry, I did not realize how large the output was until after I posted. My bad.

I converted it to an attachment.

comment:11 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Owner: changed from macports-tickets@… to ryandesign@…
Status: newassigned

comment:12 Changed 15 years ago by ryandesign (Ryan Carsten Schmidt)

Resolution: fixed
Status: assignedclosed
Summary: dsniff-devel 2.4b1_2 fails to build under Leoparddsniff-devel 2.4b1_2 fails to build under Leopard and Tiger

The build fails for me too on Tiger, and the patch fixes it. So I committed a version of it in r65110.

Note: See TracTickets for help on using tickets.