vpnc 0.5.3 Error: reinplace: couldn't read file "config.c": no such file or directory

[dpontor@…]

os x 10.6.1, mac pro 2,1, fresh macports install

host:~ user$ sudo port -d install vpnc +hybrid_cert
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/vpnc
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/vpnc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port vpnc.
DEBUG: Requested variant i386 is not provided by port vpnc.
DEBUG: Requested variant macosx is not provided by port vpnc.
DEBUG: Executing variant hybrid_cert provides hybrid_cert
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_vpnc/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/vpnc/work
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgcrypt 1.4.4_0 exists in the ports tree
DEBUG: libgcrypt 1.4.4_0  is the latest installed
DEBUG: libgcrypt 1.4.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgcrypt.
DEBUG: Requested variant i386 is not provided by port libgcrypt.
DEBUG: Requested variant macosx is not provided by port libgcrypt.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgpg-error 1.7_0 exists in the ports tree
DEBUG: libgpg-error 1.7_0  is the latest installed
DEBUG: libgpg-error 1.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgpg-error.
DEBUG: Requested variant i386 is not provided by port libgpg-error.
DEBUG: Requested variant macosx is not provided by port libgpg-error.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0
DEBUG: No need to upgrade! libgcrypt 1.4.4_0 >= libgcrypt 1.4.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8k_0 exists in the ports tree
DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
DEBUG: openssl 0.9.8k_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
DEBUG: Searching for dependency: libgcrypt
DEBUG: Found Dependency: receipt exists for libgcrypt
DEBUG: Searching for dependency: libgpg-error
DEBUG: Found Dependency: receipt exists for libgpg-error
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Executing org.macports.main (vpnc)
DEBUG: Executing org.macports.fetch (vpnc)
DEBUG: Executing org.macports.checksum (vpnc)
DEBUG: Correct (sha1) checksum for vpnc-0.5.3.tar.gz
DEBUG: Correct (rmd160) checksum for vpnc-0.5.3.tar.gz
DEBUG: Executing org.macports.extract (vpnc)
DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/vpnc/vpnc-0.5.3.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_vpnc/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/vpnc/vpnc-0.5.3.tar.gz | /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (vpnc)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_vpnc/work/vpnc-0.5.3" && /usr/bin/patch -p0'
DEBUG: Executing proc-post-org.macports.patch-patch-0
DEBUG: couldn't read file "config.c": no such file or directory
    while executing
"exec /usr/bin/sed s|__ETCDIR__|/opt/local/etc|g < config.c >@ file7"
    ("eval" body line 1)
    invoked from within
"eval exec $cmdline"
Error: reinplace: couldn't read file "config.c": no such file or directory
Error: Target org.macports.patch returned: reinplace sed(1) failed
DEBUG: Backtrace: reinplace sed(1) failed
    while executing
"$post $targetname"
Error: Status 1 encountered during processing.

[lperry (Perry Lee)]

I've attached a patch that fixed the problem for me.

[mf2k (Frank Schima)]

I cannot reproduce this issue on Mac OS X 10.6.1. The post-patch seems to work fine for me.

[dpontor@…]

perry's patch resolved the issue for me.

[kiehn@…]

I cannot reproduce this issue on MacOSX 10.5.8, either. Nevertheless, the patch does not seem to break anything for me.

[vjay@…]

I was added to this Thread, because it seems i have the same problem. Im not familiar with patch files, what should i do with this?
When following the manual of manual patching: ​http://guide.macports.org/#development.patches point 4.5.3 it doesnt work.

sh-3.2# ls
Portfile	Portfile.orig	Portfile.rej	files
sh-3.2# cat Portfile.rej
***************
*** 33,39 ****
                      port:libgpg-error
  
  patchfiles          patch-config.c
- post-patch { reinplace "s|__ETCDIR__|${prefix}/etc|g" config.c }
  
  use_configure       no
  
--- 33,39 ----
                      port:libgpg-error
  
  patchfiles          patch-config.c
+ post-patch { reinplace "s|__ETCDIR__|${prefix}/etc|g" ${worksrcpath}/config.c }
  
  use_configure       no
  
sh-3.2# 

[vjay@…]

Ok now i got it, very confusing everything, when not familiar with the system. Because in the patch-diff file stands something about port:libgpg-error. Here is what to do for everybody who knows as much as i (little) about the interna.

1. Download the patchfile
   
2. cd into /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/vpnc (not in anything else like the port which stands in patchfile, or like in manual where stands you should navigate to files sub dir)
   
3. apply patch by patch -p0 < /.../patchfile.diff
   
4. build vpnc ...
   

And ps it works.Thanks.

[jmroot (Joshua Root)]

r59305