Opened 15 years ago

Closed 15 years ago

Last modified 15 years ago

#23061 closed defect (fixed)

exempi build fails on patch on case-sensitive filesystem

Reported by: motya@… Owned by: dbevans (David B. Evans)
Priority: Normal Milestone:
Component: ports Version: 1.8.1
Keywords: Cc:
Port: exempi

Description (last modified by mf2k (Frank Schima))

I apologize for Reopening ticket. Despite changes in r62080 I can not build exempi even after a complete uninstall ports.

Here's a log of action after a new installation of ports for the snow leopard:

MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate
Password:
--->  Updating the ports tree
Synchronizing local ports tree from rsync://rsync.macports.org/release/ports/
receiving file list ... done

sent 36 bytes  received 424733 bytes  77230.73 bytes/sec
total size is 27687253  speedup is 65.18
--->  Updating MacPorts base sources using rsync
receiving file list ... done

sent 36 bytes  received 6873 bytes  1974.00 bytes/sec
total size is 4021380  speedup is 582.05
MacPorts base version 1.8.1 installed,
MacPorts base version 1.8.1 downloaded.
--->  MacPorts base is already the latest version

The ports tree has been updated. To upgrade your installed ports, you should run
  port upgrade outdated
MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw > /dev/null && sudo port install exempi
--->  Computing dependencies for exempi
--->  Fetching expat
--->  Attempting to fetch expat-2.0.1.tar.gz from http://mesh.dl.sourceforge.net/expat
--->  Verifying checksum(s) for expat
--->  Extracting expat
--->  Configuring expat
--->  Building expat
--->  Staging expat into destroot
--->  Installing expat @2.0.1_0
--->  Activating expat @2.0.1_0
--->  Cleaning expat
--->  Fetching gperf
--->  Attempting to fetch gperf-3.0.4.tar.gz from ftp://ftp.chg.ru/pub/gnu/gperf
--->  Verifying checksum(s) for gperf
--->  Extracting gperf
--->  Configuring gperf
--->  Building gperf
--->  Staging gperf into destroot
--->  Installing gperf @3.0.4_0
--->  Activating gperf @3.0.4_0
--->  Cleaning gperf
--->  Fetching libiconv
--->  Attempting to fetch libiconv-1.13.tar.gz from ftp://ftp.chg.ru/pub/gnu/libiconv
--->  Verifying checksum(s) for libiconv
--->  Extracting libiconv
--->  Applying patches to libiconv
--->  Configuring libiconv
--->  Building libiconv
--->  Staging libiconv into destroot
--->  Installing libiconv @1.13_0
--->  Activating libiconv @1.13_0
--->  Cleaning libiconv
--->  Fetching ncurses
--->  Verifying checksum(s) for ncurses
--->  Extracting ncurses
--->  Configuring ncurses
--->  Building ncurses
--->  Staging ncurses into destroot
--->  Installing ncurses @5.7_0+darwin_10
--->  Activating ncurses @5.7_0+darwin_10
--->  Cleaning ncurses
--->  Fetching gettext
--->  Attempting to fetch gettext-0.17.tar.gz from ftp://ftp.chg.ru/pub/gnu/gettext
--->  Verifying checksum(s) for gettext
--->  Extracting gettext
--->  Applying patches to gettext
--->  Configuring gettext
--->  Building gettext
--->  Staging gettext into destroot
--->  Installing gettext @0.17_4
--->  Activating gettext @0.17_4
--->  Cleaning gettext
--->  Fetching perl5.8
--->  Attempting to fetch perl-5.8.9.tar.bz2 from http://arn.se.distfiles.macports.org/perl5.8
--->  Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/
--->  Verifying checksum(s) for perl5.8
--->  Extracting perl5.8
--->  Applying patches to perl5.8
--->  Configuring perl5.8
--->  Building perl5.8
--->  Staging perl5.8 into destroot
--->  Installing perl5.8 @5.8.9_3
--->  Activating perl5.8 @5.8.9_3
--->  Cleaning perl5.8
--->  Fetching perl5
--->  Verifying checksum(s) for perl5
--->  Extracting perl5
--->  Configuring perl5
--->  Building perl5
--->  Staging perl5 into destroot
--->  Installing perl5 @5.8.9_0
--->  Activating perl5 @5.8.9_0
--->  Cleaning perl5
--->  Fetching p5-locale-gettext
--->  Attempting to fetch gettext-1.05.tar.gz from ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale
--->  Verifying checksum(s) for p5-locale-gettext
--->  Extracting p5-locale-gettext
--->  Applying patches to p5-locale-gettext
--->  Configuring p5-locale-gettext
--->  Building p5-locale-gettext
--->  Staging p5-locale-gettext into destroot
--->  Installing p5-locale-gettext @1.05_0
--->  Activating p5-locale-gettext @1.05_0
--->  Cleaning p5-locale-gettext
--->  Fetching help2man
--->  Attempting to fetch help2man-1.37.1.tar.gz from ftp://ftp.chg.ru/pub/gnu/help2man
--->  Verifying checksum(s) for help2man
--->  Extracting help2man
--->  Configuring help2man
--->  Building help2man
--->  Staging help2man into destroot
--->  Installing help2man @1.37.1_1
--->  Activating help2man @1.37.1_1
--->  Cleaning help2man
--->  Fetching m4
--->  Attempting to fetch m4-1.4.13.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/m4
--->  Verifying checksum(s) for m4
--->  Extracting m4
--->  Applying patches to m4
--->  Configuring m4
--->  Building m4
--->  Staging m4 into destroot
--->  Installing m4 @1.4.13_0
--->  Activating m4 @1.4.13_0
--->  Cleaning m4
--->  Fetching autoconf
--->  Attempting to fetch autoconf-2.65.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/autoconf
--->  Verifying checksum(s) for autoconf
--->  Extracting autoconf
--->  Configuring autoconf
--->  Building autoconf
--->  Staging autoconf into destroot
--->  Installing autoconf @2.65_0
--->  Activating autoconf @2.65_0
--->  Cleaning autoconf
--->  Fetching automake
--->  Attempting to fetch automake-1.11.1.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/automake
--->  Verifying checksum(s) for automake
--->  Extracting automake
--->  Configuring automake
--->  Building automake
--->  Staging automake into destroot
--->  Installing automake @1.11.1_0
--->  Activating automake @1.11.1_0
--->  Cleaning automake
--->  Fetching libtool
--->  Attempting to fetch libtool-2.2.6b.tar.gz from ftp://ftp.chg.ru/pub/gnu/libtool
--->  Verifying checksum(s) for libtool
--->  Extracting libtool
--->  Configuring libtool
--->  Building libtool
--->  Staging libtool into destroot
--->  Installing libtool @2.2.6b_0
--->  Activating libtool @2.2.6b_0
--->  Cleaning libtool
--->  Fetching exempi
--->  Attempting to fetch exempi-2.1.1.tar.gz from http://arn.se.distfiles.macports.org/exempi
--->  Attempting to fetch exempi-2.1.1.tar.gz from http://libopenraw.freedesktop.org/download/
--->  Verifying checksum(s) for exempi
--->  Extracting exempi
--->  Applying patches to exempi
Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1
Command output: can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig	2009-03-12 00:59:21.000000000 +0000
|+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am	2009-10-02 21:58:49.000000000 +0100
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
1 out of 1 hunk ignored

Error: Status 1 encountered during processing.

Thank you for your help.

Change History (9)

comment:1 Changed 15 years ago by motya@…

Also: the opt directory purged before installing _dmg package_ of MacPorts for the Snow Leopard.

comment:2 Changed 15 years ago by mf2k (Frank Schima)

Cc: motya@… removed
Description: modified (diff)
Keywords: snow leopard exempi 64-bit amd64 x86_64 XMP removed
Owner: changed from macports-tickets@… to devans@…

comment:3 Changed 15 years ago by jmroot (Joshua Root)

Still unable to reproduce on 10.6/trunk or 10.5/1.8.1. BTW, port install -f ncursesw makes no sense, -f is not going to fix anything and it's not even in the right place. Much more useful would be the output of

sudo port clean exempi && sudo port -d install exempi

comment:4 Changed 15 years ago by motya@…

Thanks for attention.

Here is the log of sudo port clean exempi && sudo port -d install exempi":

MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port clean exempi && sudo port -d install exempi
Password:
--->  Cleaning exempi
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port exempi.
DEBUG: Requested variant i386 is not provided by port exempi.
DEBUG: Requested variant macosx is not provided by port exempi.
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/work
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_0 exists in the ports tree
DEBUG: autoconf 2.65_0  is the latest installed
DEBUG: autoconf 2.65_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0  is the latest installed
DEBUG: automake 1.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_0 exists in the ports tree
DEBUG: libtool 2.2.6b_0  is the latest installed
DEBUG: libtool 2.2.6b_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
--->  Computing dependencies for exempi
DEBUG: Searching for dependency: autoconf
DEBUG: Found Dependency: receipt exists for autoconf
DEBUG: Searching for dependency: automake
DEBUG: Found Dependency: receipt exists for automake
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Executing org.macports.main (exempi)
--->  Fetching exempi
DEBUG: Executing org.macports.fetch (exempi)
--->  Verifying checksum(s) for exempi
DEBUG: Executing org.macports.checksum (exempi)
--->  Checksumming exempi-2.1.1.tar.gz
DEBUG: Correct (md5) checksum for exempi-2.1.1.tar.gz
DEBUG: Correct (sha1) checksum for exempi-2.1.1.tar.gz
DEBUG: Correct (rmd160) checksum for exempi-2.1.1.tar.gz
--->  Extracting exempi
DEBUG: Executing org.macports.extract (exempi)
--->  Extracting exempi-2.1.1.tar.gz
DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/exempi/exempi-2.1.1.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/exempi/exempi-2.1.1.tar.gz | /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (exempi)
--->  Applying patches to exempi
--->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/patch-source__common__LargeFileAccess.cpp
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1'
patching file source/common/LargeFileAccess.cpp
--->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/patch-source__XMPFiles__FileHandlers__Makefile.am
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1'
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig	2009-03-12 00:59:21.000000000 +0000
|+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am	2009-10-02 21:58:49.000000000 +0100
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
1 out of 1 hunk ignored
Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1
Command output: can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig	2009-03-12 00:59:21.000000000 +0000
|+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am	2009-10-02 21:58:49.000000000 +0100
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
1 out of 1 hunk ignored

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1
Command output: can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig	2009-03-12 00:59:21.000000000 +0000
|+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am	2009-10-02 21:58:49.000000000 +0100
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
1 out of 1 hunk ignored

    while executing
"command_exec patch "" "< '$patch'""
    (procedure "portpatch::patch_main" line 33)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for exempi): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

BTW. Please, can you advice me how to properly install ncursesw.

comment:5 Changed 15 years ago by motya@…

BTW I have all patch-files in port directory:

'ls /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/' prints :

patch-source__XMPFiles__FileHandlers__Makefile.am
patch-source__XMPFiles__FormatSupport__Makefile.am
patch-source__XMPFiles__FormatSupport__Reconcile_Impl.cpp
patch-source__common__LargeFileAccess.cpp

comment:6 Changed 15 years ago by motya@…

Also,

$ file /opt/local/bin/* | grep 386 prints: /opt/local/bin/daemondo (for architecture i386): Mach-O executable i386

$ file /opt/local/lib/* | grep 386 prints nothing

Thank you for your help!

comment:7 Changed 15 years ago by jmroot (Joshua Root)

Resolution: fixed
Status: newclosed

You probably should have mentioned that you are using a case-sensitive filesystem (that's an uncommon configuration). r62168

comment:8 Changed 15 years ago by jmroot (Joshua Root)

Summary: exempi build fails on patch (Snow Leopard 64-bit)exempi build fails on patch on case-sensitive filesystem

comment:9 Changed 15 years ago by motya@…

Yay! Thanks. :)

Note: See TracTickets for help on using tickets.