libwmf install - syntax error near unexpected token `GDK_PIXBUF,gdk-pixbuf-2.0'

[homeorbit@…]

Similar to this closed ticket here: ​http://trac.macports.org/ticket/21754, I'm having the same issue.

I tried updating ports, and updated installed ports, but I had the same issue.

I ran sudo port -d install libwmf +expat build.jobs=1 2>&1 | tee ~/Desktop/libwmf.txt, the results of that is here:

DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libwmf.
DEBUG: Requested variant i386 is not provided by port libwmf.
DEBUG: Requested variant macosx is not provided by port libwmf.
DEBUG: Executing variant expat provides expat
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libwmf/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf/work
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.42_0 exists in the ports tree
DEBUG: libpng 1.2.42_0  is the latest installed
DEBUG: libpng 1.2.42_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant i386 is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 7_0 exists in the ports tree
DEBUG: jpeg 7_0  is the latest installed
DEBUG: jpeg 7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant i386 is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.11_1 exists in the ports tree
DEBUG: freetype 2.3.11_1 +macosx is the latest installed
DEBUG: freetype 2.3.11_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_0 exists in the ports tree
DEBUG: autoconf 2.65_0  is the latest installed
DEBUG: autoconf 2.65_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0  is the latest installed
DEBUG: automake 1.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_0 exists in the ports tree
DEBUG: libtool 2.2.6b_0  is the latest installed
DEBUG: libtool 2.2.6b_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
--->  Computing dependencies for libwmf
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: libpng
DEBUG: Found Dependency: receipt exists for libpng
DEBUG: Searching for dependency: jpeg
DEBUG: Found Dependency: receipt exists for jpeg
DEBUG: Searching for dependency: freetype
DEBUG: Found Dependency: receipt exists for freetype
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: autoconf
DEBUG: Found Dependency: receipt exists for autoconf
DEBUG: Searching for dependency: automake
DEBUG: Found Dependency: receipt exists for automake
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Executing org.macports.main (libwmf)
--->  Fetching libwmf
DEBUG: Executing org.macports.fetch (libwmf)
--->  Verifying checksum(s) for libwmf
DEBUG: Executing org.macports.checksum (libwmf)
--->  Checksumming libwmf-0.2.8.4.tar.gz
DEBUG: Correct (md5) checksum for libwmf-0.2.8.4.tar.gz
--->  Extracting libwmf
DEBUG: Executing org.macports.extract (libwmf)
--->  Extracting libwmf-0.2.8.4.tar.gz
DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/libwmf/libwmf-0.2.8.4.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libwmf/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/libwmf/libwmf-0.2.8.4.tar.gz | /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (libwmf)
DEBUG: Executing proc-post-org.macports.patch-patch-0
autoreconf: `configure.ac' and `configure.in' both present.
autoreconf: proceeding with `configure.ac'.
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
aclocal: `configure.ac' and `configure.in' both present.
aclocal: proceeding with `configure.ac'.
autoreconf: configure.ac: tracing
autoconf: warning: both `configure.ac' and `configure.in' are present.
autoconf: warning: proceeding with `configure.ac'.
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in `.'.
glibtoolize: copying file `./ltmain.sh'
glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in-tree.
glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
aclocal: `configure.ac' and `configure.in' both present.
aclocal: proceeding with `configure.ac'.
autoreconf: running: /opt/local/bin/autoconf --force
autoconf: warning: both `configure.ac' and `configure.in' are present.
autoconf: warning: proceeding with `configure.ac'.
autoreconf: running: /opt/local/bin/autoheader --force
autoheader: `configure.ac' and `configure.in' both present.
autoheader: proceeding with `configure.ac'.
autoreconf: running: automake --add-missing --copy --force-missing
automake: `configure.ac' and `configure.in' both present.
automake: proceeding with `configure.ac'.
src/Makefile.am:23: `CFLAGS' is a user variable, you should not override it;
src/Makefile.am:23: use `AM_CFLAGS' instead.
src/convert/Makefile.am:1: `CFLAGS' is a user variable, you should not override it;
src/convert/Makefile.am:1: use `AM_CFLAGS' instead.
src/convert/Makefile.am:3: `LDFLAGS' is a user variable, you should not override it;
src/convert/Makefile.am:3: use `AM_LDFLAGS' instead.
src/extra/gd/Makefile.am:3: `CFLAGS' is a user variable, you should not override it;
src/extra/gd/Makefile.am:3: use `AM_CFLAGS' instead.
src/extra/gd/Makefile.am:5: `LDFLAGS' is a user variable, you should not override it;
src/extra/gd/Makefile.am:5: use `AM_LDFLAGS' instead.
src/extra/trio/Makefile.am:1: `CFLAGS' is a user variable, you should not override it;
src/extra/trio/Makefile.am:1: use `AM_CFLAGS' instead.
src/extra/trio/Makefile.am:3: `LDFLAGS' is a user variable, you should not override it;
src/extra/trio/Makefile.am:3: use `AM_LDFLAGS' instead.
src/ipa/Makefile.am:1: `CFLAGS' is a user variable, you should not override it;
src/ipa/Makefile.am:1: use `AM_CFLAGS' instead.
src/ipa/Makefile.am:3: `LDFLAGS' is a user variable, you should not override it;
src/ipa/Makefile.am:3: use `AM_LDFLAGS' instead.
autoreconf: Leaving directory `.'
--->  Configuring libwmf
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing org.macports.configure (libwmf)
DEBUG: Environment: CFLAGS='-O2 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch i386' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libwmf/work/libwmf-0.2.8.4" && ./configure --prefix=/opt/local --with-jpeg --without-x --with-fontdir=/opt/local/share/fonts/libwmf --with-expat'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking build system type... i386-apple-darwin9.8.0
checking host system type... i386-apple-darwin9.8.0
checking for Win32... no
checking for gawk... (cached) awk
checking for gcc... /usr/bin/gcc-4.0
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.0 accepts -g... yes
checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of /usr/bin/gcc-4.0... gcc3
checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p
checking the name lister (/usr/bin/nm -p) interface... BSD nm
checking the maximum length of command line arguments... 196608
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin9.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ANSI C header files... (cached) yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for off_t... yes
checking for size_t... yes
checking for strstr... yes
checking for printf... yes
checking for fprintf... yes
checking for vfprintf... yes
checking for sprintf... yes
checking for vprintf... yes
checking for vsprintf... yes
checking for sscanf... yes
checking for scanf... yes
checking for vscanf... yes
checking for fscanf... yes
checking for vsscanf... yes
checking for vsnprintf... yes
checking for snprintf... yes
checking for vfscanf... yes
checking for X... disabled
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for XML_ParserFree in -lexpat... yes
checking for freetype-config... /opt/local/bin/freetype-config
checking for FT_Init_FreeType in -lfreetype... yes
checking ft2build.h usability... yes
checking ft2build.h presence... yes
checking for ft2build.h... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for gzputs in -lz... yes
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking for png_write_image in -lpng... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_CreateCompress in -ljpeg... yes
checking gd.h usability... no
checking gd.h presence... no
checking for gd.h... no
./configure: line 13699: syntax error near unexpected token `GDK_PIXBUF,gdk-pixbuf-2.0'
./configure: line 13699: `	PKG_CHECK_MODULES(GDK_PIXBUF,gdk-pixbuf-2.0 >= 2.1.2,'
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libwmf/work/libwmf-0.2.8.4" && ./configure --prefix=/opt/local --with-jpeg --without-x --with-fontdir=/opt/local/share/fonts/libwmf --with-expat " returned error 2
DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libwmf/work/libwmf-0.2.8.4" && ./configure --prefix=/opt/local --with-jpeg --without-x --with-fontdir=/opt/local/share/fonts/libwmf --with-expat " returned error 2
    while executing
"$procedure $targetname"
Warning: the following items did not execute (for libwmf): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

[homeorbit@…]

Cc Me!

[jmroot (Joshua Root)]

Please remember to fill in the Port field, and note that you do not need to be in cc when you are the reporter.

[jmroot (Joshua Root)]

r62461 / r62462