autoconf-2.65 build failure

[paolo.torrielli@…]

OS X 10.6.3 Xcode version:3.2.2

Terminal output after typing "sudo port -d install autoconf"

DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.14_0 exists in the ports tree
DEBUG: m4 1.4.14_0  is the latest installed
DEBUG: m4 1.4.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2  is the latest installed
DEBUG: p5-locale-gettext 1.05_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
--->  Computing dependencies for autoconf
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: m4
DEBUG: Found Dependency: receipt exists for m4
DEBUG: Searching for dependency: help2man
DEBUG: Found Dependency: receipt exists for help2man
DEBUG: Executing org.macports.main (autoconf)
DEBUG: Skipping completed org.macports.fetch (autoconf)
DEBUG: Skipping completed org.macports.checksum (autoconf)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (autoconf)
DEBUG: Skipping completed org.macports.patch (autoconf)
DEBUG: Skipping completed org.macports.configure (autoconf)
--->  Building autoconf
DEBUG: Executing org.macports.build (autoconf)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_autoconf/work/autoconf-2.65" && /usr/bin/make -j2 all'
/usr/bin/make  all-recursive
Making all in bin
make[2]: Nothing to be done for `all'.
Making all in .
make[2]: Nothing to be done for `all-am'.
Making all in lib
Making all in Autom4te
make[3]: Nothing to be done for `all'.
Making all in m4sugar
make[3]: Nothing to be done for `all'.
Making all in autoconf
make[3]: Nothing to be done for `all'.
Making all in autotest
make[3]: Nothing to be done for `all'.
Making all in autoscan
make[3]: Nothing to be done for `all'.
Making all in emacs
WARNING: Warnings can be ignored. :-)
if test "emacs" != no; then \
	  set x; \
	  list='autoconf-mode.el autotest-mode.el'; for p in $list; do \
	    if test -f "$p"; then d=; else d="./"; fi; \
	    set x "$@" "$d$p"; shift; \
	  done; \
	  shift; \
	  EMACS="emacs" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \
	else : ; fi
touch: illegal option -- b
usage: touch [-acfm] [-r file] [-t [[CC]YY]MMDDhhmm[.SS]] file ...
open: invalid option -- q
Usage: open [-e] [-t] [-f] [-W] [-R] [-n] [-g] [-h] [-b <bundle identifier>] [-a <application>] [filenames] [--args arguments]
Help: Open opens files from a shell.
      By default, opens each file using the default application for that file.  
      If the file is in the form of a URL, the file will be opened as a URL.
Options: 
      -a                Opens with the specified application.
      -b                Opens with the specified application bundle identifier.
      -e                Opens with TextEdit.
      -t                Opens with default text editor.
      -f                Reads input from standard input and opens with TextEdit.
      -R, --reveal      Selects in the Finder instead of opening.
      -W, --wait-apps   Blocks until the used applications are closed (even if they were already running).
          --args        All remaining arguments are passed in argv to the application's main() function instead of opened.
      -n, --new         Open a new instance of the application even if one is already running.
      -g, --background  Does not bring the application to the foreground.
      -h, --header      Searches header file locations for headers matching the given filenames, and opens them.
mv: rename *.elc to ../*.elc: No such file or directory
make[3]: *** [elc-stamp] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
rm: illegal option -- b
usage: rm [-f | -i] [-dPRrvW] file ...
       unlink file
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_autoconf/work/autoconf-2.65" && /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_autoconf/work/autoconf-2.65" && /usr/bin/make -j2 all " returned error 2
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for autoconf): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

Thanks for helping.

[skymoo (Adam Mercer)]

I cannot reproduce this at all:

$ sudo port install autoconf
--->  Computing dependencies for autoconf
--->  Fetching autoconf
--->  Verifying checksum(s) for autoconf
--->  Extracting autoconf
--->  Applying patches to autoconf
--->  Configuring autoconf
--->  Building autoconf
--->  Staging autoconf into destroot
--->  Installing autoconf @2.65_1
--->  Activating autoconf @2.65_1
--->  Cleaning autoconf
$

From the log it looks like didn't clean before producing the debug log, can you run the following and attach the resulting log file:

$ sudo port clean autoconf
$ sudo port -d install autoconf 2>&1 | tee ~/Desktop/autoconf.txt

[skymoo (Adam Mercer)]

#24819