gnudatalanguage failing to build on snowleopard

[sibanda@…]

Building gnudatalanguage fails with errors that have to do with the libtool according to the log file. The error on the terminal is just below and the contents of the long file I put them right under the error on the terminal.....

sudo port install gnudatalanguage
--->  Computing dependencies for gnudatalanguage
--->  Building gnudatalanguage
Error: Target org.macports.build returned: shell command failed
Log for gnudatalanguage is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnudatalanguage/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

---

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main autoconf 2.65_1 exists in the ports tree
:debug:main autoconf 2.65_1  is the latest installed
:debug:main autoconf 2.65_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.8.9_0 exists in the ports tree
:debug:main perl5 5.8.9_0  is the latest installed
:debug:main perl5 5.8.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.8 5.8.9_3 exists in the ports tree
:debug:main perl5.8 5.8.9_3  is the latest installed
:debug:main perl5.8 5.8.9_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main m4 1.4.14_0 exists in the ports tree
:debug:main m4 1.4.14_0  is the latest installed
:debug:main m4 1.4.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main help2man 1.38.2_0 exists in the ports tree
:debug:main help2man 1.38.2_0  is the latest installed
:debug:main help2man 1.38.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! help2man 1.38.2_0 >= help2man 1.38.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-locale-gettext 1.05_2 exists in the ports tree
:debug:main p5-locale-gettext 1.05_2  is the latest installed
:debug:main p5-locale-gettext 1.05_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_0 exists in the ports tree
:debug:main gettext 0.18.1.1_0  is the latest installed
:debug:main gettext 0.18.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0  is the latest installed
:debug:main libiconv 1.13.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.7_0 exists in the ports tree
:debug:main ncurses 5.7_0 +darwin_10 is the latest installed
:debug:main ncurses 5.7_0 +darwin_10 is active
:debug:main Merging existing variants '+darwin_10' into variants
:debug:main new fully merged portvariants: darwin_10 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant darwin_10 is not provided by port ncurses.
:debug:main Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "+darwin_10" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncursesw 5.7_0 exists in the ports tree
:debug:main ncursesw 5.7_0 +darwin_10 is the latest installed
:debug:main ncursesw 5.7_0 +darwin_10 is active
:debug:main Merging existing variants '+darwin_10' into variants
:debug:main new fully merged portvariants: darwin_10 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant darwin_10 is not provided by port ncursesw.
:debug:main Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "+darwin_10" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_0 exists in the ports tree
:debug:main expat 2.0.1_0  is the latest installed
:debug:main expat 2.0.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main automake 1.11.1_0 exists in the ports tree
:debug:main automake 1.11.1_0  is the latest installed
:debug:main automake 1.11.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.2.10_0 exists in the ports tree
:debug:main libtool 2.2.10_0  is the latest installed
:debug:main libtool 2.2.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libtool 2.2.10_0 >= libtool 2.2.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0  is the latest installed
:debug:main zlib 1.2.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gsl 1.14_0 exists in the ports tree
:debug:main gsl 1.14_0 +darwin_i386 is the latest installed
:debug:main gsl 1.14_0 +darwin_i386 is active
:debug:main Merging existing variants '+darwin_i386' into variants
:debug:main new fully merged portvariants: darwin_i386 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/gsl
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant darwin_i386 is not provided by port gsl.
:debug:main Skipping upgrade since gsl 1.14_0 >= gsl 1.14_0, even though installed variants "+darwin_i386" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.1.000_1 exists in the ports tree
:debug:main readline 6.1.000_1 +darwin is the latest installed
:debug:main readline 6.1.000_1 +darwin is active
:debug:main Merging existing variants '+darwin' into variants
:debug:main new fully merged portvariants: darwin +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant darwin is not provided by port readline.
:debug:main Skipping upgrade since readline 6.1.000_1 >= readline 6.1.000_1, even though installed variants "+darwin" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main plplot 5.9.5_0 exists in the ports tree
:debug:main plplot 5.9.5_0 +aquaterm+gcc44 is the latest installed
:debug:main plplot 5.9.5_0 +aquaterm+gcc44 is active
:debug:main Merging existing variants '+aquaterm+gcc44' into variants
:debug:main new fully merged portvariants: aquaterm + gcc44 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/plplot
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant gcc44 provides gcc44
:debug:main Executing variant aquaterm provides aquaterm
:debug:main No need to upgrade! plplot 5.9.5_0 >= plplot 5.9.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.8.0_0 exists in the ports tree
:debug:main fontconfig 2.8.0_0 +macosx is the latest installed
:debug:main fontconfig 2.8.0_0 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port fontconfig.
:debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.3.12_0 exists in the ports tree
:debug:main freetype 2.3.12_0 +macosx is the latest installed
:debug:main freetype 2.3.12_0 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port freetype.
:debug:main Skipping upgrade since freetype 2.3.12_0 >= freetype 2.3.12_0, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main freefont-ttf 20060126_0 exists in the ports tree
:debug:main freefont-ttf 20060126_0  is the latest installed
:debug:main freefont-ttf 20060126_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/freefont-ttf
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! freefont-ttf 20060126_0 >= freefont-ttf 20060126_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libLASi 1.1.0_0 exists in the ports tree
:debug:main libLASi 1.1.0_0  is the latest installed
:debug:main libLASi 1.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libLASi
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libLASi 1.1.0_0 >= libLASi 1.1.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.24.5_0 exists in the ports tree
:debug:main pango 1.24.5_0 +macosx is the latest installed
:debug:main pango 1.24.5_0 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port pango.
:debug:main Skipping upgrade since pango 1.24.5_0 >= pango 1.24.5_0, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.24.1_0 exists in the ports tree
:debug:main glib2 2.24.1_0  is the latest installed
:debug:main glib2 2.24.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.24.1_0 >= glib2 2.24.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_0 exists in the ports tree
:debug:main python_select 0.3_0  is the latest installed
:debug:main python_select 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main Xft2 2.1.14_0 exists in the ports tree
:debug:main Xft2 2.1.14_0  is the latest installed
:debug:main Xft2 2.1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.6_0 exists in the ports tree
:debug:main xrender 0.9.6_0  is the latest installed
:debug:main xrender 0.9.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.3.4_0 exists in the ports tree
:debug:main xorg-libX11 1.3.4_0  is the latest installed
:debug:main xorg-libX11 1.3.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.0.3_0  is the latest installed
:debug:main xorg-libXdmcp 1.0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.5_0 exists in the ports tree
:debug:main xorg-libXau 1.0.5_0  is the latest installed
:debug:main xorg-libXau 1.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.17_0 exists in the ports tree
:debug:main xorg-xproto 7.0.17_0  is the latest installed
:debug:main xorg-xproto 7.0.17_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.4_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.4_0  is the latest installed
:debug:main xorg-kbproto 1.0.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11_0 exists in the ports tree
:debug:main xorg-renderproto 0.11_0  is the latest installed
:debug:main xorg-renderproto 0.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.8.10_0 exists in the ports tree
:debug:main cairo 1.8.10_0 +macosx is the latest installed
:debug:main cairo 1.8.10_0 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port cairo.
:debug:main Skipping upgrade since cairo 1.8.10_0 >= cairo 1.8.10_0, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.18.2_0 exists in the ports tree
:debug:main libpixman 0.18.2_0  is the latest installed
:debug:main libpixman 0.18.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpixman 0.18.2_0 >= libpixman 0.18.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.2.43_0 exists in the ports tree
:debug:main libpng 1.2.43_0  is the latest installed
:debug:main libpng 1.2.43_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpng 1.2.43_0 >= libpng 1.2.43_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main swig-tcl 2.0.0_0 exists in the ports tree
:debug:main swig-tcl 2.0.0_0  is the latest installed
:debug:main swig-tcl 2.0.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-tcl
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl
:debug:main Re-registering default for distname
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! swig-tcl 2.0.0_0 >= swig-tcl 2.0.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main swig 2.0.0_0 exists in the ports tree
:debug:main swig 2.0.0_0  is the latest installed
:debug:main swig 2.0.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! swig 2.0.0_0 >= swig 2.0.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tcl 8.5.8_0 exists in the ports tree
:debug:main tcl 8.5.8_0 +darwin is the latest installed
:debug:main tcl 8.5.8_0 +darwin is active
:debug:main Merging existing variants '+darwin' into variants
:debug:main new fully merged portvariants: darwin +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant darwin is not provided by port tcl.
:debug:main Skipping upgrade since tcl 8.5.8_0 >= tcl 8.5.8_0, even though installed variants "+darwin" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main tk 8.5.8_0 exists in the ports tree
:debug:main tk 8.5.8_0 +darwin is the latest installed
:debug:main tk 8.5.8_0 +darwin is active
:debug:main Merging existing variants '+darwin' into variants
:debug:main new fully merged portvariants: darwin +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Requested variant darwin is not provided by port tk.
:debug:main Skipping upgrade since tk 8.5.8_0 >= tk 8.5.8_0, even though installed variants "+darwin" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
:debug:main xorg-libXScrnSaver 1.2.0_0  is the latest installed
:debug:main xorg-libXScrnSaver 1.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.1.2_0 exists in the ports tree
:debug:main xorg-libXext 1.1.2_0  is the latest installed
:debug:main xorg-libXext 1.1.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.1.1_0 exists in the ports tree
:debug:main xorg-xextproto 7.1.1_0  is the latest installed
:debug:main xorg-xextproto 7.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
:debug:main xorg-scrnsaverproto 1.2.0_0  is the latest installed
:debug:main xorg-scrnsaverproto 1.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main gcc44 4.4.4_1 exists in the ports tree
:debug:main gcc44 4.4.4_1  is the latest installed
:debug:main gcc44 4.4.4_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! gcc44 4.4.4_1 >= gcc44 4.4.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gmp 5.0.1_0 exists in the ports tree
:debug:main gmp 5.0.1_0  is the latest installed
:debug:main gmp 5.0.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mpfr 3.0.0_0 exists in the ports tree
:debug:main mpfr 3.0.0_0  is the latest installed
:debug:main mpfr 3.0.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! mpfr 3.0.0_0 >= mpfr 3.0.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main aquaterm 1.0.1_5 exists in the ports tree
:debug:main aquaterm 1.0.1_5  is the latest installed
:debug:main aquaterm 1.0.1_5  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/aquaterm
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl
:debug:main Re-registering default for use_configure
:debug:main Re-registering default for universal_variant
:debug:main Re-registering default for build.pre_args
:debug:main Re-registering default for build.target
:debug:main Re-registering default for destroot.pre_args
:debug:main Re-registering default for destroot.target
:debug:main Re-registering default for destroot.destdir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! aquaterm 1.0.1_5 >= aquaterm 1.0.1_5
:debug:main epoch: in tree: 1 installed: 1
:debug:main netcdf 4.1.1_0 exists in the ports tree
:debug:main netcdf 4.1.1_0  is the latest installed
:debug:main netcdf 4.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/netcdf
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! netcdf 4.1.1_0 >= netcdf 4.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main hdf4 4.2.5_1 exists in the ports tree
:debug:main hdf4 4.2.5_1  is the latest installed
:debug:main hdf4 4.2.5_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf4
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! hdf4 4.2.5_1 >= hdf4 4.2.5_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main szip 2.1_1 exists in the ports tree
:debug:main szip 2.1_1  is the latest installed
:debug:main szip 2.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/szip
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! szip 2.1_1 >= szip 2.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg6b 6b_0 exists in the ports tree
:debug:main jpeg6b 6b_0  is the latest installed
:debug:main jpeg6b 6b_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg6b
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg6b 6b_0 >= jpeg6b 6b_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main hdf5-18 1.8.5_0 exists in the ports tree
:debug:main hdf5-18 1.8.5_0  is the latest installed
:debug:main hdf5-18 1.8.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! hdf5-18 1.8.5_0 >= hdf5-18 1.8.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main grib_api 1.8.0_2 exists in the ports tree
:debug:main grib_api 1.8.0_2 +gcc44 is the latest installed
:debug:main grib_api 1.8.0_2 +gcc44 is active
:debug:main Merging existing variants '+gcc44' into variants
:debug:main new fully merged portvariants: gcc44 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/grib_api
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant gcc44 provides gcc44
:debug:main No need to upgrade! grib_api 1.8.0_2 >= grib_api 1.8.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_7 exists in the ports tree
:debug:main jasper 1.900.1_7  is the latest installed
:debug:main jasper 1.900.1_7  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8a_0 exists in the ports tree
:debug:main jpeg 8a_0  is the latest installed
:debug:main jpeg 8a_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8a_0 >= jpeg 8a_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main openjpeg 1.3_3 exists in the ports tree
:debug:main openjpeg 1.3_3  is the latest installed
:debug:main openjpeg 1.3_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openjpeg 1.3_3 >= openjpeg 1.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main libproj4 3_20081120_2 exists in the ports tree
:debug:main libproj4 3_20081120_2  is the latest installed
:debug:main libproj4 3_20081120_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gis/libproj4
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libproj4 3_20081120_2 >= libproj4 3_20081120_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ImageMagick 6.6.2-0_0 exists in the ports tree
:debug:main ImageMagick 6.6.2-0_0 +q16 is the latest installed
:debug:main ImageMagick 6.6.2-0_0 +q16 is active
:debug:main Merging existing variants '+q16' into variants
:debug:main new fully merged portvariants: q16 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ImageMagick
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant q16 provides q16
:debug:main No need to upgrade! ImageMagick 6.6.2-0_0 >= ImageMagick 6.6.2-0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.0.8_0 exists in the ports tree
:debug:main xorg-libXt 1.0.8_0  is the latest installed
:debug:main xorg-libXt 1.0.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.1.1_0 exists in the ports tree
:debug:main xorg-libsm 1.1.1_0  is the latest installed
:debug:main xorg-libsm 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.6_0 exists in the ports tree
:debug:main xorg-libice 1.0.6_0  is the latest installed
:debug:main xorg-libice 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.5_3 exists in the ports tree
:debug:main bzip2 1.0.5_3 +darwin is the latest installed
:debug:main bzip2 1.0.5_3 +darwin is active
:debug:main Merging existing variants '+darwin' into variants
:debug:main new fully merged portvariants: darwin +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant darwin is not provided by port bzip2.
:debug:main Skipping upgrade since bzip2 1.0.5_3 >= bzip2 1.0.5_3, even though installed variants "+darwin" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2  is the latest installed
:debug:main lcms 1.19_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.2_3 exists in the ports tree
:debug:main tiff 3.9.2_3 +macosx is the latest installed
:debug:main tiff 3.9.2_3 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port tiff.
:debug:main Skipping upgrade since tiff 3.9.2_3 >= tiff 3.9.2_3, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.7_0 exists in the ports tree
:debug:main libxml2 2.7.7_0  is the latest installed
:debug:main libxml2 2.7.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main udunits2 2.1.14_0 exists in the ports tree
:debug:main udunits2 2.1.14_0  is the latest installed
:debug:main udunits2 2.1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/udunits2
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! udunits2 2.1.14_0 >= udunits2 2.1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fftw-3 3.2.2_0 exists in the ports tree
:debug:main fftw-3 3.2.2_0 +i386 is the latest installed
:debug:main fftw-3 3.2.2_0 +i386 is active
:debug:main Merging existing variants '+i386' into variants
:debug:main new fully merged portvariants: i386 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant i386 is not provided by port fftw-3.
:debug:main Skipping upgrade since fftw-3 3.2.2_0 >= fftw-3 3.2.2_0, even though installed variants "+i386" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main fftw-3-single 3.2.2_0 exists in the ports tree
:debug:main fftw-3-single 3.2.2_0  is the latest installed
:debug:main fftw-3-single 3.2.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3-single
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! fftw-3-single 3.2.2_0 >= fftw-3-single 3.2.2_0
:msg:main --->  Computing dependencies for gnudatalanguage:info:main .:debug:main Searching for dependency: autoconf
:debug:main Found Dependency: receipt exists for autoconf
:debug:main Searching for dependency: automake
:debug:main Found Dependency: receipt exists for automake
:debug:main Searching for dependency: libtool
:debug:main Found Dependency: receipt exists for libtool
:debug:main Searching for dependency: zlib
:debug:main Found Dependency: receipt exists for zlib
:debug:main Searching for dependency: gsl
:debug:main Found Dependency: receipt exists for gsl
:debug:main Searching for dependency: ncurses
:debug:main Found Dependency: receipt exists for ncurses
:debug:main Searching for dependency: readline
:debug:main Found Dependency: receipt exists for readline
:debug:main Searching for dependency: plplot
:debug:main Found Dependency: receipt exists for plplot
:debug:main Searching for dependency: netcdf
:debug:main Found Dependency: receipt exists for netcdf
:debug:main Searching for dependency: hdf4
:debug:main Found Dependency: receipt exists for hdf4
:debug:main Searching for dependency: hdf5-18
:debug:main Found Dependency: receipt exists for hdf5-18
:debug:main Searching for dependency: grib_api
:debug:main Found Dependency: receipt exists for grib_api
:debug:main Searching for dependency: libproj4
:debug:main Found Dependency: receipt exists for libproj4
:debug:main Searching for dependency: ImageMagick
:debug:main Found Dependency: receipt exists for ImageMagick
:debug:main Searching for dependency: xorg-libX11
:debug:main Found Dependency: receipt exists for xorg-libX11
:debug:main Searching for dependency: udunits2
:debug:main Found Dependency: receipt exists for udunits2
:debug:main Searching for dependency: fftw-3
:debug:main Found Dependency: receipt exists for fftw-3
:debug:main Searching for dependency: fftw-3-single
:debug:main Found Dependency: receipt exists for fftw-3-single
:msg:main 
:debug:main Executing org.macports.main (gnudatalanguage)
:debug:main Skipping completed org.macports.fetch (gnudatalanguage)
:debug:main Skipping completed org.macports.checksum (gnudatalanguage)
:debug:main Skipping completed org.macports.extract (gnudatalanguage)
:debug:main Skipping completed org.macports.patch (gnudatalanguage)
:debug:main Skipping completed org.macports.configure (gnudatalanguage)
:msg:main --->  Building gnudatalanguage
:debug:build build phase started at Mon Jun 21 10:05:44 MDT 2010
:debug:build Executing org.macports.build (gnudatalanguage)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnudatalanguage/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnudatalanguage/work/gdl-0.9rc4" && /usr/bin/make -j2 all'
:info:build /usr/bin/make  all-recursive
:info:build Making all in src
:info:build Making all in antlr
:info:build make[3]: Nothing to be done for `all'.
:info:build Making all in pro
:info:build Making all in dicom
:info:build make[4]: Nothing to be done for `all'.
:info:build make[4]: Nothing to be done for `all-am'.
:info:build /bin/sh ../libtool --tag=CXX   --mode=link /usr/bin/g++-4.2  -O2 -arch x86_64  -L/opt/local/lib -arch x86_64 -L/opt/local/lib -L/opt/local/lib  -L/opt/local/lib -L/opt/local/lib -R/opt/local/lib -L/opt/local/lib -o gdl gdl-assocdata.o gdl-basic_fun_cl.o gdl-basic_fun.o gdl-basic_fun_jmg.o gdl-basic_op.o gdl-basic_pro.o gdl-basic_pro_jmg.o gdl-CFMTLexer.o gdl-color.o gdl-convert2.o gdl-datatypes.o gdl-dcommon.o gdl-dcompiler.o gdl-default_io.o gdl-dinterpreter.o gdl-dnode.o gdl-dpro.o gdl-dstructdesc.o gdl-dstructgdl.o gdl-dvar.o gdl-envt.o gdl-extrat.o gdl-FMTIn.o gdl-FMTLexer.o gdl-fmtnode.o gdl-FMTOut.o gdl-FMTParser.o gdl-gdleventhandler.o gdl-gdlexception.o gdl-gdlgstream.o gdl-GDLInterpreter.o gdl-GDLLexer.o gdl-GDLParser.o gdl-gdlpsstream.o gdl-gdlsvgstream.o gdl-gdlpython.o gdl-GDLTreeParser.o gdl-gdlwinstream.o gdl-gdlxstream.o gdl-getfmtast.o gdl-graphics.o gdl-gsl_fun.o gdl-ifmt.o gdl-initct.o gdl-initsysvar.o gdl-io.o gdl-libinit_cl.o gdl-libinit.o gdl-libinit_jmg.o gdl-math_fun.o gdl-math_fun_jmg.o gdl-math_utl.o gdl-ncdf_att_cl.o gdl-ncdf_cl.o gdl-ncdf_dim_cl.o gdl-ncdf_var_cl.o gdl-new.o gdl-objects.o gdl-ofmt.o gdl-math_fun_ac.o gdl-libinit_ac.o gdl-math_fun_gm.o gdl-libinit_gm.o gdl-math_fun_ng.o gdl-libinit_ng.o gdl-plotting.o gdl-print.o gdl-print_tree.o gdl-read.o gdl-str.o gdl-terminfo.o gdl-topython.o gdl-typetraits.o gdl-hdf_fun.o gdl-hdf_pro.o gdl-magick_cl.o gdl-gdlwidget.o gdl-widget.o gdl-basegdl.o gdl-hdf5_fun.o gdl-libinit_mes.o gdl-file.o gdl-image.o gdl-gdljournal.o gdl-convol.o gdl-convol_inc0.o gdl-convol_inc1.o gdl-convol_inc2.o gdl-sigfpehandler.o gdl-gdlzstream.o gdl-arrayindex.o gdl-fftw.o gdl-mpi.o gdl-plot3d_nr.o gdl-grib.o gdl-prognode.o gdl-prognodeexpr.o gdl-gdl.o ../src/antlr/libantlr.a -L/usr/X11R6/lib64 -L/usr/X11R6/lib -lX11 -lmfhdf -lgslcblas -lgsl -L/opt/local/lib -L/opt/local -lncurses -lpng -lopenjpeg -L/opt/local/lib -lreadline -lz -L/opt/local/lib -lgsl -lgslcblas -L/opt/local/lib -lplplotd -lplplotcxxd -L/opt/local/lib -lMagick++ -lMagickWand -lMagickCore -llcms -ltiff -lfreetype -ljpeg -lfftw3 -L/opt/local/lib -lfontconfig -lexpat -lfreetype -lz -liconv -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz -lm -lgomp -lclparser -Wl,-framework,OpenCL -L/System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries -lm -lpthread -lltdl -L/opt/local/lib -lnetcdf -L/opt/local/lib -L/opt/local/lib/hdf -lmfhdf -ldf -ljpeg -lz -lsz -L/opt/local/lib -L/opt/local/lib/hdf -L/opt/local/lib/hdf5 -lhdf5 -L/opt/local/lib -lfftw3 -L/opt/local/lib -lfftw3f -L/opt/local/lib -lproj4 -L/opt/local/lib -ludunits2 -L/opt/local/lib -lgrib_api -ljasper
:info:build libtool: Version mismatch error.  This is libtool 2.2.6b, but the
:info:build libtool: definition of this LT_INIT comes from libtool 2.2.10.
:info:build libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b
:info:build libtool: and run autoconf again.
:info:build make[3]: *** [gdl] Error 63
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[1]: *** [all-recursive] Error 1
:info:build make: *** [all] Error 2
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnudatalanguage/work/gdl-0.9rc4" && /usr/bin/make -j2 all " returned error 2
:error:build Target org.macports.build returned: shell command failed
:debug:build Backtrace: shell command failed
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for gnudatalanguage): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for gnudatalanguage is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnudatalanguage/main.log

[jmroot (Joshua Root)]

Please don't put such large amounts of output inline, use an attachment. Please also use WikiFormatting so that any terminal output you do put inline is displayed correctly, and remember to cc the port's maintainer. As per the ticket guidelines, the High priority is reserved for the use of MacPorts team members. Note that you do not need to be in cc when you are the reporter.

[jmroot (Joshua Root)]

#25312