chromium @0.9.12 build failure - "AL/al.h:91: error: '<anonymous>' has incomplete type"

[sebastia@…]

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libvorbis 1.3.2_0 exists in the ports tree
:debug:main libvorbis 1.3.2_0  is the latest installed
:debug:main libvorbis 1.3.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libvorbis 1.3.2_0 >= libvorbis 1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libogg 1.2.2_0 exists in the ports tree
:debug:main libogg 1.2.2_0  is the latest installed
:debug:main libogg 1.2.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libogg 1.2.2_0 >= libogg 1.2.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libsdl 1.2.14_9 exists in the ports tree
:debug:main libsdl 1.2.14_9  is the latest installed
:debug:main libsdl 1.2.14_9  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main No need to upgrade! libsdl 1.2.14_9 >= libsdl 1.2.14_9
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.2.0_0 exists in the ports tree
:debug:main xorg-libXext 1.2.0_0  is the latest installed
:debug:main xorg-libXext 1.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.4.1_0 exists in the ports tree
:debug:main xorg-libX11 1.4.1_0  is the latest installed
:debug:main xorg-libX11 1.4.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.4.1_0 >= xorg-libX11 1.4.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.0_0  is the latest installed
:debug:main xorg-libXdmcp 1.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
:debug:main xorg-libXau 1.0.6_0  is the latest installed
:debug:main xorg-libXau 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.20_0 exists in the ports tree
:debug:main xorg-xproto 7.0.20_0  is the latest installed
:debug:main xorg-xproto 7.0.20_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto 7.0.20_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.7_0 exists in the ports tree
:debug:main xorg-libxcb 1.7_0 +python26 is the latest installed
:debug:main xorg-libxcb 1.7_0 +python26 is active
:debug:main Merging existing variants '+python26' into variants
:debug:main new fully merged portvariants: python26 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python26 provides python26
:debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
:debug:main xorg-xcb-proto 1.6_0 +python26 is active
:debug:main Merging existing variants '+python26' into variants
:debug:main new fully merged portvariants: python26 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Executing variant python26 provides python26
:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0  is the latest installed
:debug:main libxml2 2.7.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0  is the latest installed
:debug:main libiconv 1.13.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0  is the latest installed
:debug:main zlib 1.2.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.6_1 exists in the ports tree
:debug:main python26 2.6.6_1  is the latest installed
:debug:main python26 2.6.6_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2  is the latest installed
:debug:main gettext 0.18.1.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.7_1 exists in the ports tree
:debug:main ncurses 5.7_1  is the latest installed
:debug:main ncurses 5.7_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncursesw 5.7_1 exists in the ports tree
:debug:main ncursesw 5.7_1  is the latest installed
:debug:main ncursesw 5.7_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1  is the latest installed
:debug:main expat 2.0.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0c_0 exists in the ports tree
:debug:main openssl 1.0.0c_0  is the latest installed
:debug:main openssl 1.0.0c_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.4_0 exists in the ports tree
:debug:main sqlite3 3.7.4_0  is the latest installed
:debug:main sqlite3 3.7.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.4_0 >= sqlite3 3.7.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.1.002_0 exists in the ports tree
:debug:main readline 6.1.002_0  is the latest installed
:debug:main readline 6.1.002_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6  is the latest installed
:debug:main db46 4.6.21_6  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3  is the latest installed
:debug:main gdbm 1.8.3_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0  is the latest installed
:debug:main bzip2 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.5_0  is the latest installed
:debug:main xorg-kbproto 1.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
:debug:main xorg-xextproto 7.1.2_0  is the latest installed
:debug:main xorg-xextproto 7.1.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto 7.1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
:debug:main xorg-libXrandr 1.3.1_0  is the latest installed
:debug:main xorg-libXrandr 1.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.6_0 exists in the ports tree
:debug:main xrender 0.9.6_0  is the latest installed
:debug:main xrender 0.9.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
:debug:main xorg-renderproto 0.11.1_0  is the latest installed
:debug:main xorg-renderproto 0.11.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
:debug:main xorg-randrproto 1.3.2_0  is the latest installed
:debug:main xorg-randrproto 1.3.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main smpeg 0.4.4_9 exists in the ports tree
:debug:main smpeg 0.4.4_9  is the latest installed
:debug:main smpeg 0.4.4_9  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! smpeg 0.4.4_9 >= smpeg 0.4.4_9
:msg:main --->  Computing dependencies for chromium:info:main .:debug:main Searching for dependency: libvorbis
:debug:main Found Dependency: receipt exists for libvorbis
:debug:main Searching for dependency: libsdl
:debug:main Found Dependency: receipt exists for libsdl
:debug:main Searching for dependency: smpeg
:debug:main Found Dependency: receipt exists for smpeg
:debug:main Searching for dependency: openal
:debug:main Didn't find receipt, going to depspec regex for: openal
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/openal
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl
:debug:main Re-registering default for use_configure
:debug:main Re-registering default for universal_variant
:debug:main Re-registering default for build.pre_args
:debug:main Re-registering default for build.target
:debug:main Re-registering default for destroot.pre_args
:debug:main Re-registering default for destroot.target
:debug:main Re-registering default for destroot.destdir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:msg:main 
:msg:main --->  Dependencies to be installed: openal
:debug:main Starting logging for openal
:debug:main Executing org.macports.main (chromium)
:msg:main --->  Fetching chromium
:debug:fetch fetch phase started at Mon Feb  7 13:53:50 EST 2011
:debug:fetch Executing org.macports.fetch (chromium)
:info:fetch --->  chromium-src-0.9.12.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/chromium
:debug:fetch Pinging www.reptilelabour.com...
:debug:fetch Pinging distfiles.macports.org...
:debug:fetch Pinging aarnet.au.distfiles.macports.org...
:debug:fetch Pinging cjj.kr.distfiles.macports.org...
:debug:fetch Pinging lil.fr.distfiles.macports.org...
:debug:fetch Pinging sea.us.distfiles.macports.org...
:debug:fetch Pinging ykf.ca.distfiles.macports.org...
:debug:fetch www.reptilelabour.com ping time is 38.435
:debug:fetch distfiles.macports.org ping time is 85.056
:debug:fetch aarnet.au.distfiles.macports.org ping time is 245.059
:debug:fetch cjj.kr.distfiles.macports.org ping time is 10000
:debug:fetch lil.fr.distfiles.macports.org ping time is 122.077
:debug:fetch sea.us.distfiles.macports.org ping time is 10000
:debug:fetch ykf.ca.distfiles.macports.org ping time is 47.746
:msg:fetch --->  Attempting to fetch chromium-src-0.9.12.tar.gz from http://www.reptilelabour.com/software/files/chromium/
:info:fetch --->  chromium-data-0.9.12.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/chromium
:msg:fetch --->  Attempting to fetch chromium-data-0.9.12.tar.gz from http://www.reptilelabour.com/software/files/chromium/
:msg:fetch --->  Verifying checksum(s) for chromium
:debug:checksum checksum phase started at Mon Feb  7 13:53:55 EST 2011
:debug:checksum Executing org.macports.checksum (chromium)
:info:checksum --->  Checksumming chromium-src-0.9.12.tar.gz
:debug:checksum Correct (md5) checksum for chromium-src-0.9.12.tar.gz
:info:checksum --->  Checksumming chromium-data-0.9.12.tar.gz
:debug:checksum Correct (md5) checksum for chromium-data-0.9.12.tar.gz
:msg:checksum --->  Extracting chromium
:debug:extract extract phase started at Mon Feb  7 13:53:55 EST 2011
:debug:extract Executing org.macports.extract (chromium)
:info:extract --->  Extracting chromium-src-0.9.12.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/chromium/chromium-src-0.9.12.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/chromium/chromium-src-0.9.12.tar.gz' | tar -xf - --exclude 'CVS''
:info:extract --->  Extracting chromium-data-0.9.12.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/chromium/chromium-data-0.9.12.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/chromium/chromium-data-0.9.12.tar.gz' | tar -xf - --exclude 'CVS''
:debug:patch patch phase started at Mon Feb  7 13:53:55 EST 2011
:debug:patch Executing org.macports.patch (chromium)
:msg:patch --->  Applying patches to chromium
:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/games/chromium/files/patch-configure_functions
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/patch -p0'
:info:patch patching file scripts/configure_functions
:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/games/chromium/files/patch-Makefile.no-setup
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/patch -p0'
:info:patch patching file scripts/Makefile.no-setup
:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/games/chromium/files/patch-NCString.cpp
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/patch -p0'
:info:patch patching file src/NCString.cpp
:info:patch --->  Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/games/chromium/files/patch-Makefile
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/patch -p0'
:info:patch patching file src/Makefile
:debug:patch Executing proc-post-org.macports.patch-patch-0
:msg:patch --->  Configuring chromium
:debug:patch Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Mon Feb  7 13:53:56 EST 2011
:debug:configure Executing org.macports.configure (chromium)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && ./configure --enable-sdl --enable-smpeg --enable-vorbis --disable-setup'
:info:configure ------------------------------------------------------------
:info:configure **  This is a script to determine what options
:info:configure **  should be built into Chromium B.S.U.
:info:configure **  It is not an autoconf configure script.
:info:configure ------------------------------------------------------------
:info:configure    
:info:configure     Verify SDL install:
:info:configure     ------------------
:info:configure     found /opt/local/bin/sdl-config
:info:configure     SDL version (1.2.14) ok.
:info:configure    
:info:configure     Verify smpeg install:
:info:configure     --------------------
:info:configure     found /opt/local/bin/smpeg-config
:info:configure     smpeg version (0.4.4) ok.
:info:configure    
:info:configure     Verify Ogg/Vorbis install:
:info:configure     -------------------------
:info:configure     found required Vorbis libs.
:info:configure     VORBIS_LIBS=-L/opt/local/lib -lvorbis -lvorbisfile
:info:configure ** 
:info:configure **  Detection of Ogg/Vorbis has been enabled.
:info:configure **  BE AWARE THAT OGG/VORBIS MAY NOT BE AUTOMATICALLY DETECTED BY OPENAL!
:info:configure **  If the build process succeeds, Ogg/Vorbis support may still not
:info:configure **  be available. If this is the case, you will need to go into
:info:configure **  support/openal/linux and edit the config.h file to enable it.
:info:configure **  After that, rebuild OpenAL, copy openal/linux/src/libopenal.a to
:info:configure **  openal/lib, then rebuild chromium and chromium-setup.
:info:configure ** 
:info:configure **  Please do not send me questions about how to enable Ogg/Vorbis,
:info:configure **  you will have to figure it out yourself. Sorry.
:info:configure ** 
:info:configure    
:info:configure ------------------------------------------------------------
:info:configure     wrote ./config.mak
:info:configure     wrote ./Makefile
:info:configure    
:info:configure     Now, type 'make' to build Chromium B.S.U.!
:info:configure    
:msg:configure --->  Building chromium
:debug:build build phase started at Mon Feb  7 13:53:56 EST 2011
:debug:build Executing org.macports.build (chromium)
:debug:build port disallows a parallel build
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/make all'
:info:build cd support/glpng/src; /usr/bin/make
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o glpng.o glpng.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/png.o png/png.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngerror.o png/pngerror.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngget.o png/pngget.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngmem.o png/pngmem.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngpread.o png/pngpread.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngread.o png/pngread.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngrio.o png/pngrio.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngrtran.o png/pngrtran.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngrutil.o png/pngrutil.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngset.o png/pngset.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o png/pngtrans.o png/pngtrans.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/adler32.o zlib/adler32.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/crc32.o zlib/crc32.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/infblock.o zlib/infblock.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/infcodes.o zlib/infcodes.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/inffast.o zlib/inffast.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/inflate.o zlib/inflate.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/inftrees.o zlib/inftrees.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/infutil.o zlib/infutil.c
:info:build gcc -c -pipe -O2 -I../include -I/usr/include -I/usr/X11R6/include -o zlib/zutil.o zlib/zutil.c
:info:build rm -f libglpng.a
:info:build ar cqs libglpng.a glpng.o png/png.o png/pngerror.o png/pngget.o png/pngmem.o png/pngpread.o png/pngread.o png/pngrio.o png/pngrtran.o png/pngrutil.o png/pngset.o png/pngtrans.o zlib/adler32.o zlib/crc32.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/zutil.o 
:info:build /usr/bin/ranlib: file: libglpng.a(pngpread.o) has no symbols
:info:build mv -f libglpng.a ../lib
:info:build cd src; /usr/bin/make
:info:build g++ -c -pipe  -I../support/openal/linux/include -I../support/openal/include `/opt/local/bin/sdl-config --cflags` -DUSE_SDL `/opt/local/bin/smpeg-config --cflags` -O2 -DOLD_OPENAL -DAUDIO_OPENAL -D_REENTRANT -I../support/include -I../support/glpng/include -I/usr/X11R6/include -o textGeometryChromium.o textGeometryChromium.cpp
:info:build g++ -c -pipe  -I../support/openal/linux/include -I../support/openal/include `/opt/local/bin/sdl-config --cflags` -DUSE_SDL `/opt/local/bin/smpeg-config --cflags` -O2 -DOLD_OPENAL -DAUDIO_OPENAL -D_REENTRANT -I../support/include -I../support/glpng/include -I/usr/X11R6/include -o textGeometryBSU.o textGeometryBSU.cpp
:info:build g++ -c -pipe  -I../support/openal/linux/include -I../support/openal/include `/opt/local/bin/sdl-config --cflags` -DUSE_SDL `/opt/local/bin/smpeg-config --cflags` -O2 -DOLD_OPENAL -DAUDIO_OPENAL -D_REENTRANT -I../support/include -I../support/glpng/include -I/usr/X11R6/include -o Audio.o Audio.cpp
:info:build Audio.cpp: In constructor 'Audio::Audio()':
:info:build Audio.cpp:26: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:27: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:28: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:29: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:30: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:31: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:32: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:33: warning: deprecated conversion from string constant to 'char*'
:info:build Audio.cpp:34: warning: deprecated conversion from string constant to 'char*'
:info:build g++ -c -pipe  -I../support/openal/linux/include -I../support/openal/include `/opt/local/bin/sdl-config --cflags` -DUSE_SDL `/opt/local/bin/smpeg-config --cflags` -O2 -DOLD_OPENAL -DAUDIO_OPENAL -D_REENTRANT -I../support/include -I../support/glpng/include -I/usr/X11R6/include -o AudioOpenAL.o AudioOpenAL.cpp
:info:build In file included from AudioOpenAL.h:18,
:info:build                  from AudioOpenAL.cpp:10:
:info:build ../support/openal/include/AL/al.h:91: error: '<anonymous>' has incomplete type
:info:build ../support/openal/include/AL/al.h:91: error: invalid use of 'ALvoid'
:info:build In file included from AudioOpenAL.cpp:32:
:info:build ../support/openal/include/AL/alc.h:37: error: '<anonymous>' has incomplete type
:info:build ../support/openal/include/AL/alc.h:37: error: invalid use of 'ALvoid'
:info:build ../support/openal/include/AL/alc.h:41: error: '<anonymous>' has incomplete type
:info:build ../support/openal/include/AL/alc.h:41: error: invalid use of 'ALvoid'
:info:build In file included from AudioOpenAL.cpp:33:
:info:build ../support/openal/include/AL/alut.h:24: error: '<anonymous>' has incomplete type
:info:build ../support/openal/include/AL/alut.h:24: error: invalid use of 'ALvoid'
:info:build ../support/openal/include/AL/al.h: In member function 'void AudioOpenAL::checkError(const char*)':
:info:build ../support/openal/include/AL/al.h:91: error: too few arguments to function 'ALenum alGetError(<type error>)'
:info:build AudioOpenAL.cpp:502: error: at this point in file
:info:build make[1]: *** [AudioOpenAL.o] Error 1
:info:build make: *** [src] Error 2
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/work/Chromium-0.9" && /usr/bin/make all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for chromium): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for chromium is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_games_chromium/main.log

[jmroot (Joshua Root)]

Please remember to preview and use WikiFormatting (or better, use an attachment for lengthy output).

[ryandesign (Ryan Carsten Schmidt)]

The chromium port has been replaced by the chromium-bsu port version 0.9.14.1 and hopefully no longer has this error, though it has others.