gnupg mirror ftp.gnupg.org not available via HTTP

[nsowatsk@…]

sudo port install libgpg-error 
--->  Computing dependencies for libgpg-error
--->  Verifying checksum(s) for libgpg-error
Error: Checksum (md5) mismatch for libgpg-error-1.10.tar.bz2
Error: Checksum (sha1) mismatch for libgpg-error-1.10.tar.bz2
Error: Checksum (rmd160) mismatch for libgpg-error-1.10.tar.bz2
***
The non-matching file appears to be HTML. See this page for possible reasons
for the checksum mismatch:
<http://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file checksums
Log for libgpg-error is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libgpg-error/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

[neverpanic (Clemens Lang)]

Please delete ${PREFIX}/var/macports/distfiles/libgpg-error/libgpg-error-1.10.tar.bz2 and run sudo port -d checksum libgpg-error, reopen this bug and paste it's output if it fails again. Please also read MisbehavingServers and check the problem is not caused by one of the first three bullet points.

[neverpanic (Clemens Lang)]

Instead of deleting the file manually, please use sudo port clean --dist libgpg-error. Sorry for the misinformation.

[nsowatsk@…]

Replying to cal@…:

Instead of deleting the file manually, please use sudo port clean --dist libgpg-error. Sorry for the misinformation.

Ah, should have read all my emails ...

I did the manual thing first, then saw the second comment :-(

sudo port clean --dist libgpg-error
Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
To report a bug, see <http://guide.macports.org/#project.tickets>

Any ideas of how to sort this one out?

Thanks

Nathan

[neverpanic (Clemens Lang)]

I doesn't matter, just ignore the error when cleaning and proceed to sudo port -d checksum libgpg-error.

[nsowatsk@…]

OK, this is what I get:

sudo port -d checksum libgpg-errorPassword:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
    while executing
"cd $portpath"
    (procedure "mportopen" line 31)
    invoked from within
"mportopen $porturl [array get options] [array get requested_variations]"
Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
To report a bug, see <http://guide.macports.org/#project.tickets>
dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ sudo port clean --dist libgpg-errorError: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
To report a bug, see <http://guide.macports.org/#project.tickets>
dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ sudo port -d checksum libgpg-errorDEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
    while executing
"cd $portpath"
    (procedure "mportopen" line 31)
    invoked from within
"mportopen $porturl [array get options] [array get requested_variations]"
Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error": no such file or directory
To report a bug, see <http://guide.macports.org/#project.tickets>
dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ 

[jmroot (Joshua Root)]

Apparently you deleted the port directory and not just the distfile. Selfupdate to get it back.

[nsowatsk@…]

sudo port -d checksum libgpg-errorDEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libgpg-error/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error/work
DEBUG: Starting logging for libgpg-error
DEBUG: Executing org.macports.main (libgpg-error)
--->  Fetching libgpg-error
DEBUG: fetch phase started at Wed May 18 14:52:13 CEST 2011
DEBUG: Executing org.macports.fetch (libgpg-error)
--->  libgpg-error-1.10.tar.bz2 doesn't seem to exist in /opt/local/var/macports/distfiles/libgpg-error
DEBUG: Pinging gd.tuwien.ac.at...
DEBUG: Pinging ftp.freenet.de...
DEBUG: Pinging ftp.jyu.fi...
DEBUG: Pinging www.ring.gr.jp...
DEBUG: Pinging ftp.gnupg.org...
DEBUG: Pinging distfiles.macports.org...
DEBUG: Pinging aarnet.au.distfiles.macports.org...
DEBUG: Pinging cjj.kr.distfiles.macports.org...
DEBUG: Pinging lil.fr.distfiles.macports.org...
DEBUG: Pinging sea.us.distfiles.macports.org...
DEBUG: Pinging ykf.ca.distfiles.macports.org...
DEBUG: gd.tuwien.ac.at ping time is 69.123
DEBUG: ftp.freenet.de ping time is 49.476
DEBUG: ftp.jyu.fi ping time is 82.630
DEBUG: www.ring.gr.jp ping time is 332.885
DEBUG: ftp.gnupg.org ping time is 46.066
DEBUG: distfiles.macports.org ping time is 195.020
DEBUG: aarnet.au.distfiles.macports.org ping time is 364.810
DEBUG: cjj.kr.distfiles.macports.org ping time is 10000
DEBUG: lil.fr.distfiles.macports.org ping time is 53.224
DEBUG: sea.us.distfiles.macports.org ping time is 10000
DEBUG: ykf.ca.distfiles.macports.org ping time is 139.698
--->  Attempting to fetch libgpg-error-1.10.tar.bz2 from http://ftp.gnupg.org/gcrypt/libgpg-error
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   151    0   151    0     0    774      0 --:--:-- --:--:-- --:--:--  2359
--->  Verifying checksum(s) for libgpg-error
DEBUG: checksum phase started at Wed May 18 14:52:16 CEST 2011
DEBUG: Executing org.macports.checksum (libgpg-error)
--->  Checksumming libgpg-error-1.10.tar.bz2
Error: Checksum (md5) mismatch for libgpg-error-1.10.tar.bz2
Portfile checksum: libgpg-error-1.10.tar.bz2 md5 736a03daa9dc5873047d4eb4a9c22a16
Distfile checksum: libgpg-error-1.10.tar.bz2 md5 22095249612f80b74ccb0820b902ec19
Error: Checksum (sha1) mismatch for libgpg-error-1.10.tar.bz2
Portfile checksum: libgpg-error-1.10.tar.bz2 sha1 95b324359627fbcb762487ab6091afbe59823b29
Distfile checksum: libgpg-error-1.10.tar.bz2 sha1 616b0cb40c9e17a7c4969da52b0956bb25af2c91
Error: Checksum (rmd160) mismatch for libgpg-error-1.10.tar.bz2
Portfile checksum: libgpg-error-1.10.tar.bz2 rmd160 435fcf1c748ae6877b5de7f133a741cd55dc1140
Distfile checksum: libgpg-error-1.10.tar.bz2 rmd160 348e6554664ec43ab4aa04b6b0e198a5643adc55
The correct checksum line may be:
checksums           md5     22095249612f80b74ccb0820b902ec19 \
                    sha1    616b0cb40c9e17a7c4969da52b0956bb25af2c91 \
                    rmd160  348e6554664ec43ab4aa04b6b0e198a5643adc55
***
The non-matching file appears to be HTML. See this page for possible reasons
for the checksum mismatch:
<http://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file checksums
DEBUG: Backtrace: Unable to verify file checksums
    while executing
"$procedure $targetname"
Warning: the following items did not execute (for libgpg-error): org.macports.checksum
Log for libgpg-error is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libgpg-error/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ 

[neverpanic (Clemens Lang)]

The problem is caused by

• you being behind a proxy that serves HTML instead of a proper error (with the corresponding error code) when it can't connect to ​http://ftp.gnupg.org/, which would cause macports to try the next mirror.
• ftp.gnupg.org not being available via HTTP.

We should probably remove the corresponding entry from _resources/port1.0/fetch/mirror_sites.tcl. Patch attached.

[nsowatsk@…]

Applied patch, problem fixed.

Many thanks! :-)

Nathan

[neverpanic (Clemens Lang)]

Fixed in r78715.