ffmpeg @0.7.1 (multimedia) build failed from MacPorts 2.0.1

[ohoneman@…]

I have keep failing,

sudo port upgrade outdated

even I tried, $ sudo port selfupdate $ sudo port clean --dist ffmpeg $ sudo port install ffmpeg

thank you for mac port project. :) MacPorts 2.0.1

my computer information

Model Name: MacBook Pro Model Identifier: MacBookPro1,2 Processor Name: Intel Core Duo Processor Speed: 2.16 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 2 GB Bus Speed: 667 MHz Boot ROM Version: MBP12.0061.B03

Version: 4.0 (4A304a)

Location: /Developer Applications: Xcode: 4.0 (99) Instruments: 4.0 (3536) Dashcode: 3.0.2 (333) SDKs: Mac OS X: 10.6: (4A304a) iPhone OS: 4.3: (8F190)

I put in log as below cheong-hun-kims-computer:~ cheonghunkim$ sudo port install ffmpeg Password: ---> Computing dependencies for ffmpeg ---> Building ffmpeg Error: Target org.macports.build returned: shell command failed (see log for details) Log for ffmpeg is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>

---

version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.26_0 exists in the ports tree :debug:main pkgconfig 0.26_0 is the latest installed :debug:main pkgconfig 0.26_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main glib2 2.28.8_0 exists in the ports tree :debug:main glib2 2.28.8_0 is the latest installed :debug:main glib2 2.28.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.13.1_0 exists in the ports tree :debug:main libiconv 1.13.1_0 is the latest installed :debug:main libiconv 1.13.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 is the latest installed :debug:main expat 2.0.1_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 is the latest installed :debug:main zlib 1.2.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.3_1 exists in the ports tree :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed :debug:main perl5 5.12.3_1 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_1 exists in the ports tree :debug:main perl5.12 5.12.3_1 is the latest installed :debug:main perl5.12 5.12.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gmake 3.82_0 exists in the ports tree :debug:main gmake 3.82_0 is the latest installed :debug:main gmake 3.82_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gmake 3.82_0 >= gmake 3.82_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main texi2html 5.0_0 exists in the ports tree :debug:main texi2html 5.0_0 is the latest installed :debug:main texi2html 5.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texi2html :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! texi2html 5.0_0 >= texi2html 5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main lame 3.98.4_0 exists in the ports tree :debug:main lame 3.98.4_0 is the latest installed :debug:main lame 3.98.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! lame 3.98.4_0 >= lame 3.98.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libvorbis 1.3.2_0 exists in the ports tree :debug:main libvorbis 1.3.2_0 is the latest installed :debug:main libvorbis 1.3.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libvorbis 1.3.2_0 >= libvorbis 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libogg 1.2.2_0 exists in the ports tree :debug:main libogg 1.2.2_0 is the latest installed :debug:main libogg 1.2.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libogg 1.2.2_0 >= libogg 1.2.2_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main libtheora 1.1.1_0 exists in the ports tree :debug:main libtheora 1.1.1_0 is the latest installed :debug:main libtheora 1.1.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtheora 1.1.1_0 >= libtheora 1.1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main dirac 1.0.2_1 exists in the ports tree :debug:main dirac 1.0.2_1 is the latest installed :debug:main dirac 1.0.2_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! dirac 1.0.2_1 >= dirac 1.0.2_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main cppunit 1.12.1_0 exists in the ports tree :debug:main cppunit 1.12.1_0 is the latest installed :debug:main cppunit 1.12.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main schroedinger 1.0.10_1 exists in the ports tree :debug:main schroedinger 1.0.10_1 is the latest installed :debug:main schroedinger 1.0.10_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! schroedinger 1.0.10_1 >= schroedinger 1.0.10_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main orc 0.4.14_0 exists in the ports tree :debug:main orc 0.4.14_0 is the latest installed :debug:main orc 0.4.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orc :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! orc 0.4.14_0 >= orc 0.4.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main faac 1.28_2 exists in the ports tree :debug:main faac 1.28_2 is the latest installed :debug:main faac 1.28_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! faac 1.28_2 >= faac 1.28_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main faad2 2.7_0 exists in the ports tree :debug:main faad2 2.7_0 is the latest installed :debug:main faad2 2.7_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! faad2 2.7_0 >= faad2 2.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main speex 1.2rc1_0 exists in the ports tree :debug:main speex 1.2rc1_0 is the latest installed :debug:main speex 1.2rc1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/speex :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! speex 1.2rc1_0 >= speex 1.2rc1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main XviD 1.3.2_0 exists in the ports tree :debug:main XviD 1.3.2_0 is the latest installed :debug:main XviD 1.3.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! XviD 1.3.2_0 >= XviD 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main x264 20110628_0 exists in the ports tree :debug:main x264 20110628_0 is the latest installed :debug:main x264 20110628_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! x264 20110628_0 >= x264 20110628_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libvpx 0.9.6_1 exists in the ports tree :debug:main libvpx 0.9.6_1 is the latest installed :debug:main libvpx 0.9.6_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libvpx :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libvpx 0.9.6_1 >= libvpx 0.9.6_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libsdl 1.2.14_9 exists in the ports tree :debug:main libsdl 1.2.14_9 +x11 is the latest installed :debug:main libsdl 1.2.14_9 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main adding the default universal variant :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! libsdl 1.2.14_9 >= libsdl 1.2.14_9 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXext 1.3.0_0 exists in the ports tree :debug:main xorg-libXext 1.3.0_0 is the latest installed :debug:main xorg-libXext 1.3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.4.4_0 exists in the ports tree :debug:main xorg-libX11 1.4.4_0 is the latest installed :debug:main xorg-libX11 1.4.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed :debug:main xorg-libXdmcp 1.1.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree :debug:main xorg-libXau 1.0.6_0 is the latest installed :debug:main xorg-libXau 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.22_0 exists in the ports tree :debug:main xorg-xproto 7.0.22_0 is the latest installed :debug:main xorg-xproto 7.0.22_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libxcb 1.7_0 exists in the ports tree :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed :debug:main xorg-libxcb 1.7_0 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed :debug:main xorg-xcb-proto 1.6_0 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.7.8_0 exists in the ports tree :debug:main libxml2 2.7.8_0 is the latest installed :debug:main libxml2 2.7.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.2_0 exists in the ports tree :debug:main python27 2.7.2_0 is the latest installed :debug:main python27 2.7.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python27 2.7.2_0 >= python27 2.7.2_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0d_0 exists in the ports tree :debug:main openssl 1.0.0d_0 is the latest installed :debug:main openssl 1.0.0d_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.7.1_0 exists in the ports tree :debug:main sqlite3 3.7.7.1_0 is the latest installed :debug:main sqlite3 3.7.7.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.7.1_0 >= sqlite3 3.7.7.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 is the latest installed :debug:main readline 6.2.000_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant java provides java :debug:main Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even though installed variants "" do not match "+java". :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.8.3_3 exists in the ports tree :debug:main gdbm 1.8.3_3 is the latest installed :debug:main gdbm 1.8.3_3 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed :debug:main xorg-libpthread-stubs 0.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree :debug:main xorg-kbproto 1.0.5_0 is the latest installed :debug:main xorg-kbproto 1.0.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree :debug:main xorg-xextproto 7.2.0_0 is the latest installed :debug:main xorg-xextproto 7.2.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree :debug:main xorg-libXrandr 1.3.2_0 is the latest installed :debug:main xorg-libXrandr 1.3.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xrender 0.9.6_0 exists in the ports tree :debug:main xrender 0.9.6_0 is the latest installed :debug:main xrender 0.9.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree :debug:main xorg-renderproto 0.11.1_0 is the latest installed :debug:main xorg-renderproto 0.11.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree :debug:main xorg-randrproto 1.3.2_0 is the latest installed :debug:main xorg-randrproto 1.3.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0 :msg:main ---> Computing dependencies for ffmpeg:info:main .:debug:main Checking for conflicts against ffmpeg :debug:main Searching for dependency: ffmpeg-devel :debug:main Didn't find receipt, going to depspec regex for: ffmpeg-devel :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: gmake :debug:main Found Dependency: receipt exists for gmake :debug:main Searching for dependency: texi2html :debug:main Found Dependency: receipt exists for texi2html :debug:main Searching for dependency: lame :debug:main Found Dependency: receipt exists for lame :debug:main Searching for dependency: libvorbis :debug:main Found Dependency: receipt exists for libvorbis :debug:main Searching for dependency: libogg :debug:main Found Dependency: receipt exists for libogg :debug:main Searching for dependency: libtheora :debug:main Found Dependency: receipt exists for libtheora :debug:main Searching for dependency: dirac :debug:main Found Dependency: receipt exists for dirac :debug:main Searching for dependency: schroedinger :debug:main Found Dependency: receipt exists for schroedinger :debug:main Searching for dependency: faac :debug:main Found Dependency: receipt exists for faac :debug:main Searching for dependency: faad2 :debug:main Found Dependency: receipt exists for faad2 :debug:main Searching for dependency: speex :debug:main Found Dependency: receipt exists for speex :debug:main Searching for dependency: XviD :debug:main Found Dependency: receipt exists for XviD :debug:main Searching for dependency: x264 :debug:main Found Dependency: receipt exists for x264 :debug:main Searching for dependency: libvpx :debug:main Found Dependency: receipt exists for libvpx :debug:main Searching for dependency: libsdl :debug:main Found Dependency: receipt exists for libsdl :debug:main Searching for dependency: bzip2 :debug:main Found Dependency: receipt exists for bzip2 :debug:main Searching for dependency: zlib :debug:main Found Dependency: receipt exists for zlib :msg:main :debug:main Executing org.macports.main (ffmpeg) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 503 :debug:main euid changed to: 503 :debug:main Skipping completed org.macports.archivefetch (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (ffmpeg) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Aug 4 09:11:35 EDT 2011 :notice:build ---> Building ffmpeg :debug:build Executing org.macports.build (ffmpeg) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' V='1' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" && /opt/local/bin/gmake -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" && /opt/local/bin/gmake -j2 -w all :info:build gmake: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1' :info:build /Developer/usr/bin/clang -I. -I"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" -I/opt/local/include -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DPIC -DHAVE_AV_CONFIG_H -pipe -O2 -DHAVE_LRINTF -I/opt/local/include -arch i386 -std=c99 -fomit-frame-pointer -fPIC -I/opt/local/include/dirac -I/opt/local/include/schroedinger-1.0 -I/opt/local/include/orc-0.4 -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/local/include/SDL -g -Wdeclaration-after-statement -Wall -Wno-parentheses -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -Wtype-limits -Wundef -Wmissing-prototypes -Wno-pointer-to-int-cast -O3 -fno-math-errno -fno-signed-zeros -mllvm -stack-alignment=16 -Qunused-arguments -MMD -c -o libavcodec/h264_cabac.o libavcodec/h264_cabac.c :info:build /Developer/usr/bin/clang -I. -I"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" -I/opt/local/include -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DPIC -DHAVE_AV_CONFIG_H -pipe -O2 -DHAVE_LRINTF -I/opt/local/include -arch i386 -std=c99 -fomit-frame-pointer -fPIC -I/opt/local/include/dirac -I/opt/local/include/schroedinger-1.0 -I/opt/local/include/orc-0.4 -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/local/include/SDL -g -Wdeclaration-after-statement -Wall -Wno-parentheses -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -Wtype-limits -Wundef -Wmissing-prototypes -Wno-pointer-to-int-cast -O3 -fno-math-errno -fno-signed-zeros -mllvm -stack-alignment=16 -Qunused-arguments -MMD -c -o libavcodec/huffman.o libavcodec/huffman.c :info:build /Developer/usr/bin/clang -I. -I"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" -I/opt/local/include -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DPIC -DHAVE_AV_CONFIG_H -pipe -O2 -DHAVE_LRINTF -I/opt/local/include -arch i386 -std=c99 -fomit-frame-pointer -fPIC -I/opt/local/include/dirac -I/opt/local/include/schroedinger-1.0 -I/opt/local/include/orc-0.4 -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/local/include/SDL -g -Wdeclaration-after-statement -Wall -Wno-parentheses -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -Wtype-limits -Wundef -Wmissing-prototypes -Wno-pointer-to-int-cast -O3 -fno-math-errno -fno-signed-zeros -mllvm -stack-alignment=16 -Qunused-arguments -MMD -c -o libavcodec/huffyuv.o libavcodec/huffyuv.c :info:build /Developer/usr/bin/clang -I. -I"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" -I/opt/local/include -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DPIC -DHAVE_AV_CONFIG_H -pipe -O2 -DHAVE_LRINTF -I/opt/local/include -arch i386 -std=c99 -fomit-frame-pointer -fPIC -I/opt/local/include/dirac -I/opt/local/include/schroedinger-1.0 -I/opt/local/include/orc-0.4 -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/local/include/SDL -g -Wdeclaration-after-statement -Wall -Wno-parentheses -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -Wtype-limits -Wundef -Wmissing-prototypes -Wno-pointer-to-int-cast -O3 -fno-math-errno -fno-signed-zeros -mllvm -stack-alignment=16 -Qunused-arguments -MMD -c -o libavcodec/idcinvideo.o libavcodec/idcinvideo.c :info:build libavcodec/idcinvideo.c:217:5: warning: 'AVPaletteControl' is deprecated [-Wdeprecated-declarations] :info:build AVPaletteControl *palette_control = avctx->palctrl; :info:build <sup>:info:build 1 warning generated. :info:build /Developer/usr/bin/clang -I. -I"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" -I/opt/local/include -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DPIC -DHAVE_AV_CONFIG_H -pipe -O2 -DHAVE_LRINTF -I/opt/local/include -arch i386 -std=c99 -fomit-frame-pointer -fPIC -I/opt/local/include/dirac -I/opt/local/include/schroedinger-1.0 -I/opt/local/include/orc-0.4 -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/local/include/SDL -g -Wdeclaration-after-statement -Wall -Wno-parentheses -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -Wtype-limits -Wundef -Wmissing-prototypes -Wno-pointer-to-int-cast -O3 -fno-math-errno -fno-signed-zeros -mllvm -stack-alignment=16 -Qunused-arguments -MMD -c -o libavcodec/iff.o libavcodec/iff.c :info:build fatal error: error in backend: Ran out of registers during register allocation! :info:build gmake: * [libavcodec/h264_cabac.o] Error 1 :info:build gmake: * Waiting for unfinished jobs.... :info:build gmake: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/work/ffmpeg-0.7.1" && /opt/local/bin/gmake -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details)</sup>

while executing

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: the following items did not execute (for ffmpeg): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for ffmpeg is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_ffmpeg/ffmpeg/main.log