Qtiplot installation problem

[jimmymisc@…]

I cannot install qtiplot. Python ver is 2.7.2 (enthought). Any suggestions ?

Port command started with PID 60421
Fetching archive for gdbm
Error: Target org.macports.archivefetch returned: could not set effective gid to 0
Error: Unable to upgrade port: could not set effective gid to 0
Error: Unable to execute port: upgrade pkgconfig failed
To report a bug, see <http://guide.macports.org/#project.tickets>
Executing: /opt/local/bin/port install qtiplot +python27

[jimmymisc@…]

Cc Me!

[ryandesign (Ryan Carsten Schmidt)]

It seems actually it's pkgconfig that failed to build, which is rather unusual and almost certainly indicates a problem on your system, since thousands of people would be complaining if pkgconfig were truly broken since it's a dependency of nearly everything else.

Please clean pkgconfig, selfupdate, and try again. If it fails again, attach the main.log file.

[jimmymisc@…]

Interesting...now installed packages disappeared from Porticus after selfupdate, and installing pkgconfig does not work either...please help..

port repair privileges PortRunner: helper application is not setuid root... PortRunner: repairing privileges on helper application PortRunner: privileges repaired successfully

port install gromacs +gcc44 Port command started with PID 34179 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs +gcc44

port install gromacs Port command started with PID 36240 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs

port install gromacs-double Port command started with PID 38311 ---> Computing dependencies for gromacs-double ---> Fetching gromacs-double ---> Verifying checksum(s) for gromacs-double ---> Extracting gromacs-double ---> Configuring gromacs-double Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs-double is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs-double/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs-double

port install gcc44 Port command started with PID 42702 ---> Computing dependencies for gcc44 ---> Cleaning gcc44 ---> Executing: /opt/local/bin/port install gcc44

port install gromacs Port command started with PID 42709 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>

port install gromacs Port command started with PID 44769 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs

port install gnuplot Port command started with PID 46877 ---> Computing dependencies for gnuplot ---> Dependencies to be installed: aquaterm fontconfig freetype zlib gd2 autoconf help2man p5-locale-gettext perl5 perl5.12 m4 automake jpeg libpng libtool xpm xorg-libXext xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb python27 bzip2 db46 gdbm openssl readline sqlite3 xorg-libpthread-stubs xorg-xcb-proto libxml2 xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-libXt xorg-libsm xorg-libice pdflib ---> Fetching aquaterm ---> Attempting to fetch aquaterm_src.1.0.1.tar.gz from ​http://voxel.dl.sourceforge.net/aquaterm ---> Verifying checksum(s) for aquaterm ---> Extracting aquaterm ---> Applying patches to aquaterm ---> Configuring aquaterm ---> Building aquaterm ---> Staging aquaterm into destroot ---> Installing aquaterm @1.0.1_5 ---> Activating aquaterm @1.0.1_5 ---> Cleaning aquaterm ---> Fetching zlib ---> Attempting to fetch zlib-1.2.5.tar.bz2 from ​http://www.zlib.net/ ---> Verifying checksum(s) for zlib ---> Extracting zlib ---> Applying patches to zlib ---> Configuring zlib ---> Building zlib ---> Staging zlib into destroot ---> Installing zlib @1.2.5_0 ---> Activating zlib @1.2.5_0 ---> Cleaning zlib ---> Fetching freetype ---> Attempting to fetch freetype-2.4.4.tar.bz2 from ​http://download.savannah.gnu.org/releases/freetype/ ---> Attempting to fetch freetype-doc-2.4.4.tar.bz2 from ​http://download.savannah.gnu.org/releases/freetype/ ---> Verifying checksum(s) for freetype ---> Extracting freetype ---> Applying patches to freetype ---> Configuring freetype ---> Building freetype ---> Staging freetype into destroot ---> Installing freetype @2.4.4_0 ---> Activating freetype @2.4.4_0 ---> Cleaning freetype ---> Fetching fontconfig ---> Attempting to fetch fontconfig-2.8.0.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/fontconfig ---> Verifying checksum(s) for fontconfig ---> Extracting fontconfig ---> Applying patches to fontconfig ---> Configuring fontconfig ---> Building fontconfig ---> Staging fontconfig into destroot ---> Installing fontconfig @2.8.0_0 ---> Activating fontconfig @2.8.0_0 ---> Cleaning fontconfig ---> Fetching perl5.12 ---> Attempting to fetch perl-5.12.3.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/perl5.12 ---> Verifying checksum(s) for perl5.12 ---> Extracting perl5.12 ---> Applying patches to perl5.12 ---> Configuring perl5.12 ---> Building perl5.12 ---> Staging perl5.12 into destroot ---> Installing perl5.12 @5.12.3_1 ---> Activating perl5.12 @5.12.3_1 ---> Cleaning perl5.12 ---> Fetching perl5 ---> Verifying checksum(s) for perl5 ---> Extracting perl5 ---> Configuring perl5 ---> Building perl5 ---> Staging perl5 into destroot ---> Installing perl5 @5.12.3_1+perl5_12 ---> Activating perl5 @5.12.3_1+perl5_12 ---> Cleaning perl5 ---> Fetching p5-locale-gettext ---> Attempting to fetch gettext-1.05.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/CPAN/modules/by-module/Locale ---> Verifying checksum(s) for p5-locale-gettext ---> Extracting p5-locale-gettext ---> Applying patches to p5-locale-gettext ---> Configuring p5-locale-gettext ---> Building p5-locale-gettext ---> Staging p5-locale-gettext into destroot ---> Installing p5-locale-gettext @1.05_5 ---> Activating p5-locale-gettext @1.05_5 ---> Cleaning p5-locale-gettext ---> Fetching help2man ---> Attempting to fetch help2man-1.39.2.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/help2man ---> Verifying checksum(s) for help2man ---> Extracting help2man ---> Configuring help2man ---> Building help2man ---> Staging help2man into destroot ---> Installing help2man @1.39.2_0 ---> Activating help2man @1.39.2_0 ---> Cleaning help2man ---> Fetching m4 ---> Attempting to fetch m4-1.4.16.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/m4 ---> Verifying checksum(s) for m4 ---> Extracting m4 ---> Configuring m4 ---> Building m4 ---> Staging m4 into destroot ---> Installing m4 @1.4.16_0 ---> Activating m4 @1.4.16_0 ---> Cleaning m4 ---> Fetching autoconf ---> Attempting to fetch autoconf-2.68.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/autoconf ---> Verifying checksum(s) for autoconf ---> Extracting autoconf ---> Configuring autoconf ---> Building autoconf ---> Staging autoconf into destroot ---> Installing autoconf @2.68_2 ---> Activating autoconf @2.68_2 ---> Cleaning autoconf ---> Fetching automake ---> Attempting to fetch automake-1.11.1.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/automake ---> Verifying checksum(s) for automake ---> Extracting automake ---> Configuring automake ---> Building automake ---> Staging automake into destroot ---> Installing automake @1.11.1_0 ---> Activating automake @1.11.1_0 ---> Cleaning automake ---> Fetching jpeg ---> Attempting to fetch jpegsrc.v8c.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/jpeg ---> Verifying checksum(s) for jpeg ---> Extracting jpeg ---> Configuring jpeg ---> Building jpeg ---> Staging jpeg into destroot ---> Installing jpeg @8c_0 ---> Activating jpeg @8c_0 ---> Cleaning jpeg ---> Fetching libpng ---> Attempting to fetch libpng-1.4.5.tar.bz2 from ​http://voxel.dl.sourceforge.net/libpng ---> Verifying checksum(s) for libpng ---> Extracting libpng ---> Configuring libpng ---> Building libpng ---> Staging libpng into destroot ---> Installing libpng @1.4.5_0 ---> Activating libpng @1.4.5_0 ---> Cleaning libpng ---> Fetching libtool ---> Attempting to fetch libtool-2.4.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Configuring libtool ---> Building libtool ---> Staging libtool into destroot ---> Installing libtool @2.4_0 ---> Activating libtool @2.4_0 ---> Cleaning libtool ---> Fetching xorg-bigreqsproto ---> Attempting to fetch bigreqsproto-1.1.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-bigreqsproto ---> Verifying checksum(s) for xorg-bigreqsproto ---> Extracting xorg-bigreqsproto ---> Configuring xorg-bigreqsproto ---> Building xorg-bigreqsproto ---> Staging xorg-bigreqsproto into destroot ---> Installing xorg-bigreqsproto @1.1.1_0 ---> Activating xorg-bigreqsproto @1.1.1_0 ---> Cleaning xorg-bigreqsproto ---> Fetching xorg-inputproto ---> Attempting to fetch inputproto-2.0.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-inputproto ---> Verifying checksum(s) for xorg-inputproto ---> Extracting xorg-inputproto ---> Configuring xorg-inputproto ---> Building xorg-inputproto ---> Staging xorg-inputproto into destroot ---> Installing xorg-inputproto @2.0.1_0 ---> Activating xorg-inputproto @2.0.1_0 ---> Cleaning xorg-inputproto ---> Fetching xorg-kbproto ---> Attempting to fetch kbproto-1.0.5.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-kbproto ---> Verifying checksum(s) for xorg-kbproto ---> Extracting xorg-kbproto ---> Configuring xorg-kbproto ---> Building xorg-kbproto ---> Staging xorg-kbproto into destroot ---> Installing xorg-kbproto @1.0.5_0 ---> Activating xorg-kbproto @1.0.5_0 ---> Cleaning xorg-kbproto ---> Fetching xorg-xproto ---> Attempting to fetch xproto-7.0.21.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xproto ---> Verifying checksum(s) for xorg-xproto ---> Extracting xorg-xproto ---> Configuring xorg-xproto ---> Building xorg-xproto ---> Staging xorg-xproto into destroot ---> Installing xorg-xproto @7.0.21_0 ---> Activating xorg-xproto @7.0.21_0 ---> Cleaning xorg-xproto ---> Fetching xorg-libXau ---> Attempting to fetch libXau-1.0.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXau ---> Verifying checksum(s) for xorg-libXau ---> Extracting xorg-libXau ---> Configuring xorg-libXau ---> Building xorg-libXau ---> Staging xorg-libXau into destroot ---> Installing xorg-libXau @1.0.6_0 ---> Activating xorg-libXau @1.0.6_0 ---> Cleaning xorg-libXau ---> Fetching xorg-libXdmcp ---> Attempting to fetch libXdmcp-1.1.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXdmcp ---> Verifying checksum(s) for xorg-libXdmcp ---> Extracting xorg-libXdmcp ---> Configuring xorg-libXdmcp ---> Building xorg-libXdmcp ---> Staging xorg-libXdmcp into destroot ---> Installing xorg-libXdmcp @1.1.0_0 ---> Activating xorg-libXdmcp @1.1.0_0 ---> Cleaning xorg-libXdmcp ---> Fetching bzip2 ---> Attempting to fetch bzip2-1.0.6.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/bzip2 ---> Verifying checksum(s) for bzip2 ---> Extracting bzip2 ---> Applying patches to bzip2 ---> Configuring bzip2 ---> Building bzip2 ---> Staging bzip2 into destroot ---> Installing bzip2 @1.0.6_0 ---> Activating bzip2 @1.0.6_0 ---> Cleaning bzip2 ---> Fetching db46 ---> Attempting to fetch patch.4.6.21.1 from ​http://download.oracle.com/berkeley-db/patches/db/4.6.21/ ---> Attempting to fetch patch.4.6.21.2 from ​http://download.oracle.com/berkeley-db/patches/db/4.6.21/ ---> Attempting to fetch patch.4.6.21.3 from ​http://download.oracle.com/berkeley-db/patches/db/4.6.21/ ---> Attempting to fetch patch.4.6.21.4 from ​http://download.oracle.com/berkeley-db/patches/db/4.6.21/ ---> Attempting to fetch db-4.6.21.tar.gz from ​http://download-east.oracle.com/berkeley-db/ ---> Verifying checksum(s) for db46 ---> Extracting db46 ---> Applying patches to db46 ---> Configuring db46 ---> Building db46 ---> Staging db46 into destroot ---> Installing db46 @4.6.21_6 ---> Activating db46 @4.6.21_6 ---> Cleaning db46 ---> Fetching gdbm ---> Attempting to fetch gdbm-1.8.3.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gdbm ---> Verifying checksum(s) for gdbm ---> Extracting gdbm ---> Configuring gdbm ---> Building gdbm ---> Staging gdbm into destroot ---> Installing gdbm @1.8.3_3 ---> Activating gdbm @1.8.3_3 ---> Cleaning gdbm ---> Fetching openssl ---> Attempting to fetch openssl-1.0.0d.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/openssl ---> Verifying checksum(s) for openssl ---> Extracting openssl ---> Applying patches to openssl ---> Configuring openssl ---> Building openssl ---> Staging openssl into destroot ---> Installing openssl @1.0.0d_0 ---> Activating openssl @1.0.0d_0 ---> Cleaning openssl ---> Fetching readline ---> Attempting to fetch readline-6.2.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/readline ---> Verifying checksum(s) for readline ---> Extracting readline ---> Applying patches to readline ---> Configuring readline ---> Building readline ---> Staging readline into destroot ---> Installing readline @6.2.000_0 ---> Activating readline @6.2.000_0 ---> Cleaning readline ---> Fetching sqlite3 ---> Attempting to fetch sqlite-autoconf-3070600.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/sqlite3 ---> Verifying checksum(s) for sqlite3 ---> Extracting sqlite3 ---> Applying patches to sqlite3 ---> Configuring sqlite3 ---> Building sqlite3 ---> Staging sqlite3 into destroot ---> Installing sqlite3 @3.7.6_0 ---> Activating sqlite3 @3.7.6_0 ---> Cleaning sqlite3 ---> Fetching python27 ---> Attempting to fetch Python-2.7.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python27 ---> Verifying checksum(s) for python27 ---> Extracting python27 ---> Applying patches to python27 ---> Configuring python27 ---> Building python27 ---> Staging python27 into destroot ---> Installing python27 @2.7.1_1 ---> Activating python27 @2.7.1_1 To fully complete your installation and make python 2.7 the default, please run:

sudo port install python_select sudo python_select python27

---> Cleaning python27 ---> Fetching xorg-libpthread-stubs ---> Attempting to fetch libpthread-stubs-0.3.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libpthread-stubs ---> Verifying checksum(s) for xorg-libpthread-stubs ---> Extracting xorg-libpthread-stubs ---> Configuring xorg-libpthread-stubs ---> Building xorg-libpthread-stubs ---> Staging xorg-libpthread-stubs into destroot ---> Installing xorg-libpthread-stubs @0.3_0 ---> Activating xorg-libpthread-stubs @0.3_0 ---> Cleaning xorg-libpthread-stubs ---> Fetching libxml2 ---> Attempting to fetch libxml2-2.7.8.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libxml2 ---> Verifying checksum(s) for libxml2 ---> Extracting libxml2 ---> Configuring libxml2 ---> Building libxml2 ---> Staging libxml2 into destroot ---> Installing libxml2 @2.7.8_0 ---> Activating libxml2 @2.7.8_0 ---> Cleaning libxml2 ---> Fetching xorg-xcb-proto ---> Attempting to fetch xcb-proto-1.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xcb-proto ---> Verifying checksum(s) for xorg-xcb-proto ---> Extracting xorg-xcb-proto ---> Configuring xorg-xcb-proto ---> Building xorg-xcb-proto ---> Staging xorg-xcb-proto into destroot ---> Installing xorg-xcb-proto @1.6_0+python27 ---> Activating xorg-xcb-proto @1.6_0+python27 ---> Cleaning xorg-xcb-proto ---> Fetching xorg-libxcb ---> Attempting to fetch libxcb-1.7.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libxcb ---> Verifying checksum(s) for xorg-libxcb ---> Extracting xorg-libxcb ---> Configuring xorg-libxcb ---> Building xorg-libxcb ---> Staging xorg-libxcb into destroot ---> Installing xorg-libxcb @1.7_0+python27 ---> Activating xorg-libxcb @1.7_0+python27 ---> Cleaning xorg-libxcb ---> Fetching xorg-util-macros ---> Attempting to fetch util-macros-1.13.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-util-macros ---> Verifying checksum(s) for xorg-util-macros ---> Extracting xorg-util-macros ---> Configuring xorg-util-macros ---> Building xorg-util-macros ---> Staging xorg-util-macros into destroot ---> Installing xorg-util-macros @1.13.0_0 ---> Activating xorg-util-macros @1.13.0_0 ---> Cleaning xorg-util-macros ---> Fetching xorg-xcmiscproto ---> Attempting to fetch xcmiscproto-1.2.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xcmiscproto ---> Verifying checksum(s) for xorg-xcmiscproto ---> Extracting xorg-xcmiscproto ---> Configuring xorg-xcmiscproto ---> Building xorg-xcmiscproto ---> Staging xorg-xcmiscproto into destroot ---> Installing xorg-xcmiscproto @1.2.1_0 ---> Activating xorg-xcmiscproto @1.2.1_0 ---> Cleaning xorg-xcmiscproto ---> Fetching xorg-xextproto ---> Attempting to fetch xextproto-7.2.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xextproto ---> Verifying checksum(s) for xorg-xextproto ---> Extracting xorg-xextproto ---> Configuring xorg-xextproto ---> Building xorg-xextproto ---> Staging xorg-xextproto into destroot ---> Installing xorg-xextproto @7.2.0_0 ---> Activating xorg-xextproto @7.2.0_0 ---> Cleaning xorg-xextproto ---> Fetching xorg-xf86bigfontproto ---> Attempting to fetch xf86bigfontproto-1.2.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xf86bigfontproto ---> Verifying checksum(s) for xorg-xf86bigfontproto ---> Extracting xorg-xf86bigfontproto ---> Configuring xorg-xf86bigfontproto ---> Building xorg-xf86bigfontproto ---> Staging xorg-xf86bigfontproto into destroot ---> Installing xorg-xf86bigfontproto @1.2.0_0 ---> Activating xorg-xf86bigfontproto @1.2.0_0 ---> Cleaning xorg-xf86bigfontproto ---> Fetching xorg-xtrans ---> Attempting to fetch xtrans-1.2.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xtrans ---> Verifying checksum(s) for xorg-xtrans ---> Extracting xorg-xtrans ---> Configuring xorg-xtrans ---> Building xorg-xtrans ---> Staging xorg-xtrans into destroot ---> Installing xorg-xtrans @1.2.6_0 ---> Activating xorg-xtrans @1.2.6_0 ---> Cleaning xorg-xtrans ---> Fetching xorg-libX11 ---> Attempting to fetch libX11-1.4.3.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libX11 ---> Verifying checksum(s) for xorg-libX11 ---> Extracting xorg-libX11 ---> Configuring xorg-libX11 ---> Building xorg-libX11 ---> Staging xorg-libX11 into destroot ---> Installing xorg-libX11 @1.4.3_0 ---> Activating xorg-libX11 @1.4.3_0 ---> Cleaning xorg-libX11 ---> Fetching xorg-libXext ---> Attempting to fetch libXext-1.2.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXext ---> Verifying checksum(s) for xorg-libXext ---> Extracting xorg-libXext ---> Configuring xorg-libXext ---> Building xorg-libXext ---> Staging xorg-libXext into destroot ---> Installing xorg-libXext @1.2.0_0 ---> Activating xorg-libXext @1.2.0_0 ---> Cleaning xorg-libXext ---> Fetching xorg-libice ---> Attempting to fetch libICE-1.0.7.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libice ---> Verifying checksum(s) for xorg-libice ---> Extracting xorg-libice ---> Configuring xorg-libice ---> Building xorg-libice ---> Staging xorg-libice into destroot ---> Installing xorg-libice @1.0.7_0 ---> Activating xorg-libice @1.0.7_0 ---> Cleaning xorg-libice ---> Fetching xorg-libsm ---> Attempting to fetch libSM-1.2.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libsm ---> Verifying checksum(s) for xorg-libsm ---> Extracting xorg-libsm ---> Configuring xorg-libsm ---> Building xorg-libsm ---> Staging xorg-libsm into destroot ---> Installing xorg-libsm @1.2.0_0 ---> Activating xorg-libsm @1.2.0_0 ---> Cleaning xorg-libsm ---> Fetching xorg-libXt ---> Attempting to fetch libXt-1.1.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXt ---> Verifying checksum(s) for xorg-libXt ---> Extracting xorg-libXt ---> Configuring xorg-libXt ---> Building xorg-libXt ---> Staging xorg-libXt into destroot ---> Installing xorg-libXt @1.1.1_0 ---> Activating xorg-libXt @1.1.1_0 ---> Cleaning xorg-libXt ---> Fetching xpm ---> Attempting to fetch libXpm-3.5.9.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xpm ---> Verifying checksum(s) for xpm ---> Extracting xpm ---> Configuring xpm ---> Building xpm ---> Staging xpm into destroot ---> Installing xpm @3.5.9_0 ---> Activating xpm @3.5.9_0 ---> Cleaning xpm ---> Fetching gd2 ---> Attempting to fetch gd-2.0.35.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/gd2 ---> Verifying checksum(s) for gd2 ---> Extracting gd2 ---> Applying patches to gd2 ---> Configuring gd2 ---> Building gd2 ---> Staging gd2 into destroot ---> Installing gd2 @2.0.35_9 ---> Activating gd2 @2.0.35_9 ---> Cleaning gd2 ---> Fetching pdflib ---> Attempting to fetch PDFlib-Lite-7.0.5.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/pdflib ---> Verifying checksum(s) for pdflib ---> Extracting pdflib ---> Applying patches to pdflib ---> Configuring pdflib ---> Building pdflib ---> Staging pdflib into destroot ---> Installing pdflib @7.0.5_1 ---> Activating pdflib @7.0.5_1 ---> Cleaning pdflib ---> Fetching gnuplot ---> Attempting to fetch gnuplot-4.4.3.tar.gz from ​http://downloads.sourceforge.net/gnuplot ---> Attempting to fetch gnuplot.pdf from ​http://sourceforge.net/projects/gnuplot/files/gnuplot/4.4.3/ ---> Verifying checksum(s) for gnuplot ---> Extracting gnuplot ---> Applying patches to gnuplot ---> Configuring gnuplot ---> Building gnuplot ---> Staging gnuplot into destroot ---> Installing gnuplot @4.4.3_0 ---> Activating gnuplot @4.4.3_0 ---> Cleaning gnuplot ---> Executing: /opt/local/bin/port install gnuplot

port install fftw-3 Port command started with PID 15403 ---> Fetching fftw-3 ---> Attempting to fetch fftw-3.2.2.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/fftw-3 ---> Verifying checksum(s) for fftw-3 ---> Extracting fftw-3 ---> Configuring fftw-3 ---> Building fftw-3 ---> Staging fftw-3 into destroot ---> Installing fftw-3 @3.2.2_0 ---> Activating fftw-3 @3.2.2_0 ---> Cleaning fftw-3 ---> Executing: /opt/local/bin/port install fftw-3

port install gromacs Port command started with PID 47035 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs

port install fftw-3-long Port command started with PID 49168 ---> Computing dependencies for fftw-3-long ---> Fetching fftw-3-long ---> Verifying checksum(s) for fftw-3-long ---> Extracting fftw-3-long ---> Configuring fftw-3-long ---> Building fftw-3-long ---> Staging fftw-3-long into destroot ---> Installing fftw-3-long @3.2.2_0 ---> Activating fftw-3-long @3.2.2_0 ---> Cleaning fftw-3-long ---> Executing: /opt/local/bin/port install fftw-3-long

port install gromacs Port command started with PID 73581 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>

port install gromacs +gcc44 Port command started with PID 75658 ---> Computing dependencies for gromacs ---> Configuring gromacs Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for gromacs is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_gromacs/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install gromacs +gcc44

port install gromacs-double Port command started with PID 77772 ---> Computing dependencies for gromacs-double ---> Configuring gromacs-double ---> Building gromacs-double ---> Staging gromacs-double into destroot ---> Installing gromacs-double @4.5.1_1+gcc44 ---> Activating gromacs-double @4.5.1_1+gcc44 ---> Cleaning gromacs-double ---> Executing: /opt/local/bin/port install gromacs-double

port install fftw-3-single Port command started with PID 78073 ---> Computing dependencies for fftw-3-single ---> Fetching fftw-3-single ---> Verifying checksum(s) for fftw-3-single ---> Extracting fftw-3-single ---> Configuring fftw-3-single ---> Building fftw-3-single ---> Staging fftw-3-single into destroot ---> Installing fftw-3-single @3.2.2_0 ---> Activating fftw-3-single @3.2.2_0 ---> Cleaning fftw-3-single ---> Executing: /opt/local/bin/port install fftw-3-single

port install gromacs +gcc44 Port command started with PID 9851 ---> Computing dependencies for gromacs ---> Configuring gromacs ---> Building gromacs ---> Staging gromacs into destroot ---> Installing gromacs @4.5.1_1+gcc44 ---> Activating gromacs @4.5.1_1+gcc44 ---> Cleaning gromacs ---> Executing: /opt/local/bin/port install gromacs +gcc44

port activate gromacs@4.5.1_1+gcc44 Port command started with PID 7574 ---> Computing dependencies for gromacs ---> Cleaning gromacs ---> Executing: /opt/local/bin/port activate gromacs@4.5.1_1+gcc44

port activate gromacs@4.5.1_1+gcc44 Port command started with PID 7594 ---> Computing dependencies for gromacs ---> Cleaning gromacs ---> Executing: /opt/local/bin/port activate gromacs@4.5.1_1+gcc44

port deactivate gromacs-double@4.5.1_1+gcc44 Port command started with PID 7666 ---> Deactivating gromacs-double @4.5.1_1+gcc44 ---> Cleaning gromacs-double ---> Executing: /opt/local/bin/port deactivate gromacs-double@4.5.1_1+gcc44

port uninstall gromacs-double@4.5.1_1+gcc44 Port command started with PID 7671 ---> Uninstalling gromacs-double @4.5.1_1+gcc44 ---> Cleaning gromacs-double ---> Executing: /opt/local/bin/port uninstall gromacs-double@4.5.1_1+gcc44

port activate gromacs@4.5.1_1+gcc44 Port command started with PID 7677 ---> Computing dependencies for gromacs ---> Cleaning gromacs ---> Executing: /opt/local/bin/port activate gromacs@4.5.1_1+gcc44

port install grace Port command started with PID 9845 ---> Computing dependencies for grace ---> Dependencies to be installed: openmotif Xft2 xrender xorg-renderproto xbitmaps xorg-libXmu xorg-libXp xorg-printproto ---> Fetching xorg-renderproto ---> Attempting to fetch renderproto-0.11.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-renderproto ---> Verifying checksum(s) for xorg-renderproto ---> Extracting xorg-renderproto ---> Configuring xorg-renderproto ---> Building xorg-renderproto ---> Staging xorg-renderproto into destroot ---> Installing xorg-renderproto @0.11.1_0 ---> Activating xorg-renderproto @0.11.1_0 ---> Cleaning xorg-renderproto ---> Fetching xrender ---> Attempting to fetch libXrender-0.9.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xrender ---> Verifying checksum(s) for xrender ---> Extracting xrender ---> Configuring xrender ---> Building xrender ---> Staging xrender into destroot ---> Installing xrender @0.9.6_0 ---> Activating xrender @0.9.6_0 ---> Cleaning xrender ---> Fetching Xft2 ---> Attempting to fetch libXft-2.2.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/Xft2 ---> Verifying checksum(s) for Xft2 ---> Extracting Xft2 ---> Configuring Xft2 ---> Building Xft2 ---> Staging Xft2 into destroot ---> Installing Xft2 @2.2.0_0 ---> Activating Xft2 @2.2.0_0 ---> Cleaning Xft2 ---> Fetching xbitmaps ---> Attempting to fetch xbitmaps-1.1.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xbitmaps ---> Verifying checksum(s) for xbitmaps ---> Extracting xbitmaps ---> Configuring xbitmaps ---> Building xbitmaps ---> Staging xbitmaps into destroot ---> Installing xbitmaps @1.1.1_0 ---> Activating xbitmaps @1.1.1_0 ---> Cleaning xbitmaps ---> Fetching xorg-libXmu ---> Attempting to fetch libXmu-1.1.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXmu ---> Verifying checksum(s) for xorg-libXmu ---> Extracting xorg-libXmu ---> Configuring xorg-libXmu ---> Building xorg-libXmu ---> Staging xorg-libXmu into destroot ---> Installing xorg-libXmu @1.1.0_0 ---> Activating xorg-libXmu @1.1.0_0 ---> Cleaning xorg-libXmu ---> Fetching xorg-printproto ---> Attempting to fetch printproto-1.0.5.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-printproto ---> Verifying checksum(s) for xorg-printproto ---> Extracting xorg-printproto ---> Configuring xorg-printproto ---> Building xorg-printproto ---> Staging xorg-printproto into destroot ---> Installing xorg-printproto @1.0.5_0 ---> Activating xorg-printproto @1.0.5_0 ---> Cleaning xorg-printproto ---> Fetching xorg-libXp ---> Attempting to fetch libXp-1.0.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXp ---> Verifying checksum(s) for xorg-libXp ---> Extracting xorg-libXp ---> Configuring xorg-libXp ---> Building xorg-libXp ---> Staging xorg-libXp into destroot ---> Installing xorg-libXp @1.0.1_0 ---> Activating xorg-libXp @1.0.1_0 ---> Cleaning xorg-libXp ---> Fetching openmotif ---> Attempting to fetch openmotif-2.3.2.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/openmotif ---> Verifying checksum(s) for openmotif ---> Extracting openmotif ---> Applying patches to openmotif ---> Configuring openmotif ---> Building openmotif ---> Staging openmotif into destroot ---> Installing openmotif @2.3.2_3 ---> Activating openmotif @2.3.2_3 ---> Cleaning openmotif ---> Fetching grace ---> Attempting to fetch grace-5.1.22.tar.gz from ​ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for grace ---> Extracting grace ---> Applying patches to grace ---> Configuring grace ---> Building grace ---> Staging grace into destroot ---> Installing grace @5.1.22_6 ---> Activating grace @5.1.22_6 ---> Cleaning grace ---> Executing: /opt/local/bin/port install grace

port activate grace@5.1.22_6 Port command started with PID 35138 ---> Computing dependencies for grace ---> Cleaning grace ---> Executing: /opt/local/bin/port activate grace@5.1.22_6

port activate gnuplot@4.4.3_0 Port command started with PID 32306 ---> Computing dependencies for gnuplot ---> Cleaning gnuplot ---> Executing: /opt/local/bin/port activate gnuplot@4.4.3_0

port install bkchem Port command started with PID 34060 ---> Computing dependencies for bkchem ---> Dependencies to be installed: python25 tk tcl xorg-libXScrnSaver xorg-scrnsaverproto ---> Fetching tcl ---> Attempting to fetch tcl8.5.9-src.tar.gz from ​http://voxel.dl.sourceforge.net/tcl

Cancel 'port cancel' with PID 34060

port install kst Port command started with PID 62610 Warning: port definitions are more than two weeks old, consider using selfupdate ---> Computing dependencies for kst ---> Dependencies to be installed: gsl texinfo kdebase4 automoc cmake libidn qt4-mac dbus libmng lcms tiff kdebase4-runtime bison exiv2 hicolor-icon-theme kdelibs4 aspell aspell-dict-en attica phonon glib2 avahi dbus-python26 dbus-glib gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl gnome-doc-utils intltool gnome-common p5-getopt-long p5-pathtools p5-scalar-list-utils p5-xml-parser iso-codes libxslt py27-libxml2 rarian getopt py26-gobject libffi python26 libdaemon libglade2 gtk2 atk gdk-pixbuf2 jasper pango cairo libpixman shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto py26-gtk py26-cairo py26-numpy atlas gzip py26-nose py26-distribute py26-py cyrus-sasl2 dbusmenu-qt git-core curl curl-ca-bundle p5-error rsync popt qjson enchant hunspell flex giflib gmake grantlee kerberos5 gnupg libusb-compat libusb libart_lgpl liblzma openexr ilmbase gsed pcre qca shared-desktop-ontologies soprano clucene libiodbc redland raptor rasqal strigi virtuoso gawk libssh openslp oxygen-icons qimageblitz kdepimlibs4 akonadi boost icu mysql5-server mysql5 gpgme libassuan libgpg-error pth libical openldap ---> Fetching texinfo ---> Attempting to fetch texinfo-4.13.tar.lzma from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/texinfo ---> Verifying checksum(s) for texinfo ---> Extracting texinfo ---> Configuring texinfo ---> Building texinfo ---> Staging texinfo into destroot ---> Installing texinfo @4.13_2 ---> Activating texinfo @4.13_2 ---> Cleaning texinfo ---> Fetching gsl ---> Attempting to fetch gsl-1.14.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gsl ---> Verifying checksum(s) for gsl ---> Extracting gsl ---> Configuring gsl ---> Building gsl ---> Staging gsl into destroot ---> Installing gsl @1.14_0 ---> Activating gsl @1.14_0 ---> Cleaning gsl ---> Fetching libidn ---> Attempting to fetch libidn-1.20.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/libidn ---> Verifying checksum(s) for libidn ---> Extracting libidn ---> Configuring libidn ---> Building libidn ---> Staging libidn into destroot ---> Installing libidn @1.20_0 ---> Activating libidn @1.20_0 ---> Cleaning libidn ---> Fetching cmake ---> Attempting to fetch cmake-2.8.4.tar.gz from ​http://www.cmake.org/files/v2.8/ ---> Verifying checksum(s) for cmake ---> Extracting cmake ---> Applying patches to cmake ---> Configuring cmake ---> Building cmake ---> Staging cmake into destroot ---> Installing cmake @2.8.4_0 ---> Activating cmake @2.8.4_0 ---> Cleaning cmake ---> Fetching dbus ---> Attempting to fetch dbus-1.2.24.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/dbus ---> Verifying checksum(s) for dbus ---> Extracting dbus ---> Applying patches to dbus ---> Configuring dbus ---> Building dbus ---> Staging dbus into destroot ---> Installing dbus @1.2.24_1 ---> Activating dbus @1.2.24_1 ############################################################################ # Startup items have been generated that will aid in # starting dbus with launchd. They are disabled # by default. Execute the following command to start them, # and to cause them to launch at startup: # # sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist ############################################################################ ---> Cleaning dbus ---> Fetching tiff ---> Attempting to fetch tiff-3.9.4.tar.gz from ​ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for tiff ---> Extracting tiff ---> Configuring tiff ---> Building tiff ---> Staging tiff into destroot ---> Installing tiff @3.9.4_0 ---> Activating tiff @3.9.4_0 ---> Cleaning tiff ---> Fetching lcms ---> Attempting to fetch lcms-1.19.tar.gz from ​http://downloads.sourceforge.net/lcms ---> Verifying checksum(s) for lcms ---> Extracting lcms ---> Configuring lcms ---> Building lcms ---> Staging lcms into destroot ---> Installing lcms @1.19_2 ---> Activating lcms @1.19_2 ---> Cleaning lcms ---> Fetching libmng ---> Attempting to fetch libmng-1.0.10.tar.gz from ​http://downloads.sourceforge.net/libmng ---> Verifying checksum(s) for libmng ---> Extracting libmng ---> Configuring libmng ---> Building libmng ---> Staging libmng into destroot ---> Installing libmng @1.0.10_2 ---> Activating libmng @1.0.10_2 ---> Cleaning libmng ---> Fetching qt4-mac ---> Attempting to fetch qt-everywhere-opensource-src-4.7.2.tar.gz from ​http://get.qt.nokia.com/qt/source/ ---> Verifying checksum(s) for qt4-mac ---> Extracting qt4-mac ---> Applying patches to qt4-mac ---> Configuring qt4-mac ---> Building qt4-mac ---> Staging qt4-mac into destroot ---> Installing qt4-mac @4.7.2_1+quartz ---> Activating qt4-mac @4.7.2_1+quartz ---> Cleaning qt4-mac ---> Fetching automoc ---> Attempting to fetch automoc4-0.9.88.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/automoc4/0.9.88/ ---> Verifying checksum(s) for automoc ---> Extracting automoc ---> Configuring automoc ---> Building automoc ---> Staging automoc into destroot ---> Installing automoc @0.9.88_3 ---> Activating automoc @0.9.88_3 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning automoc ---> Fetching bison ---> Attempting to fetch bison-2.4.3.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/bison ---> Verifying checksum(s) for bison ---> Extracting bison ---> Configuring bison ---> Building bison ---> Staging bison into destroot ---> Installing bison @2.4.3_0 ---> Activating bison @2.4.3_0 ---> Cleaning bison ---> Fetching exiv2 ---> Attempting to fetch exiv2-0.21.1.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/exiv2 ---> Verifying checksum(s) for exiv2 ---> Extracting exiv2 ---> Configuring exiv2 ---> Building exiv2 ---> Staging exiv2 into destroot ---> Installing exiv2 @0.21.1_0 ---> Activating exiv2 @0.21.1_0 ---> Cleaning exiv2 ---> Fetching hicolor-icon-theme ---> Attempting to fetch hicolor-icon-theme-0.12.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/hicolor-icon-theme ---> Verifying checksum(s) for hicolor-icon-theme ---> Extracting hicolor-icon-theme ---> Configuring hicolor-icon-theme ---> Building hicolor-icon-theme ---> Staging hicolor-icon-theme into destroot ---> Installing hicolor-icon-theme @0.12_0 ---> Activating hicolor-icon-theme @0.12_0 ---> Cleaning hicolor-icon-theme ---> Fetching aspell ---> Attempting to fetch aspell-0.60.6.tar.gz from ​ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for aspell ---> Extracting aspell ---> Applying patches to aspell ---> Configuring aspell ---> Building aspell ---> Staging aspell into destroot ---> Installing aspell @0.60.6_4+nonls ---> Activating aspell @0.60.6_4+nonls You must install (at least) one of the language dictionaries after installing this port in order for it to work. ---> Cleaning aspell ---> Fetching aspell-dict-en ---> Attempting to fetch aspell6-en-7.1-0.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/aspell/dict/en ---> Verifying checksum(s) for aspell-dict-en ---> Extracting aspell-dict-en ---> Configuring aspell-dict-en ---> Building aspell-dict-en ---> Staging aspell-dict-en into destroot ---> Installing aspell-dict-en @7.1_0 ---> Activating aspell-dict-en @7.1_0 ---> Cleaning aspell-dict-en ---> Fetching glib2 ---> Attempting to fetch glib-2.28.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/glib2 ---> Verifying checksum(s) for glib2 ---> Extracting glib2 ---> Applying patches to glib2 ---> Configuring glib2 ---> Building glib2 ---> Staging glib2 into destroot ---> Installing glib2 @2.28.6_0 ---> Activating glib2 @2.28.6_0 ---> Cleaning glib2 ---> Fetching phonon ---> Attempting to fetch phonon-4.4.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/phonon/4.4.2/ ---> Verifying checksum(s) for phonon ---> Extracting phonon ---> Applying patches to phonon ---> Configuring phonon ---> Building phonon ---> Staging phonon into destroot ---> Installing phonon @4.4.2_3 ---> Activating phonon @4.4.2_3 ---> Cleaning phonon ---> Fetching attica ---> Attempting to fetch attica-0.2.0.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/attica ---> Verifying checksum(s) for attica ---> Extracting attica ---> Configuring attica ---> Building attica ---> Staging attica into destroot ---> Installing attica @0.2.0_1 ---> Activating attica @0.2.0_1 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning attica ---> Fetching xmlcatmgr ---> Attempting to fetch xmlcatmgr-2.2.tar.gz from ​ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for xmlcatmgr ---> Extracting xmlcatmgr ---> Configuring xmlcatmgr ---> Building xmlcatmgr ---> Staging xmlcatmgr into destroot ---> Installing xmlcatmgr @2.2_1 ---> Activating xmlcatmgr @2.2_1 ---> Cleaning xmlcatmgr ---> Fetching docbook-xml-4.1.2 ---> Attempting to fetch docbkx412.zip from ​http://www.oasis-open.org/docbook/xml/4.1.2/ ---> Verifying checksum(s) for docbook-xml-4.1.2 ---> Extracting docbook-xml-4.1.2 ---> Configuring docbook-xml-4.1.2 ---> Building docbook-xml-4.1.2 ---> Staging docbook-xml-4.1.2 into destroot ---> Installing docbook-xml-4.1.2 @4.1.2_1 ---> Activating docbook-xml-4.1.2 @4.1.2_1 ---> Cleaning docbook-xml-4.1.2 ---> Fetching docbook-xml-4.2 ---> Attempting to fetch docbook-xml-4.2.zip from ​http://www.oasis-open.org/docbook/xml/4.2/ ---> Verifying checksum(s) for docbook-xml-4.2 ---> Extracting docbook-xml-4.2 ---> Configuring docbook-xml-4.2 ---> Building docbook-xml-4.2 ---> Staging docbook-xml-4.2 into destroot ---> Installing docbook-xml-4.2 @4.2_0 ---> Activating docbook-xml-4.2 @4.2_0 ---> Cleaning docbook-xml-4.2 ---> Fetching docbook-xml-4.3 ---> Attempting to fetch docbook-xml-4.3.zip from ​http://www.oasis-open.org/docbook/xml/4.3/ ---> Verifying checksum(s) for docbook-xml-4.3 ---> Extracting docbook-xml-4.3 ---> Configuring docbook-xml-4.3 ---> Building docbook-xml-4.3 ---> Staging docbook-xml-4.3 into destroot ---> Installing docbook-xml-4.3 @4.3_0 ---> Activating docbook-xml-4.3 @4.3_0 ---> Cleaning docbook-xml-4.3 ---> Fetching docbook-xml-4.4 ---> Attempting to fetch docbook-xml-4.4.zip from ​http://www.oasis-open.org/docbook/xml/4.4/ ---> Verifying checksum(s) for docbook-xml-4.4 ---> Extracting docbook-xml-4.4 ---> Configuring docbook-xml-4.4 ---> Building docbook-xml-4.4 ---> Staging docbook-xml-4.4 into destroot ---> Installing docbook-xml-4.4 @4.4_0 ---> Activating docbook-xml-4.4 @4.4_0 ---> Cleaning docbook-xml-4.4 ---> Fetching docbook-xml-4.5 ---> Attempting to fetch docbook-xml-4.5.zip from ​http://www.oasis-open.org/docbook/xml/4.5/ ---> Verifying checksum(s) for docbook-xml-4.5 ---> Extracting docbook-xml-4.5 ---> Configuring docbook-xml-4.5 ---> Building docbook-xml-4.5 ---> Staging docbook-xml-4.5 into destroot ---> Installing docbook-xml-4.5 @4.5_0 ---> Activating docbook-xml-4.5 @4.5_0 ---> Cleaning docbook-xml-4.5 ---> Fetching docbook-xml-5.0 ---> Attempting to fetch docbook-5.0.zip from ​http://www.docbook.org/xml/5.0/ ---> Verifying checksum(s) for docbook-xml-5.0 ---> Extracting docbook-xml-5.0 ---> Configuring docbook-xml-5.0 ---> Building docbook-xml-5.0 ---> Staging docbook-xml-5.0 into destroot ---> Installing docbook-xml-5.0 @5.0_0 ---> Activating docbook-xml-5.0 @5.0_0 ---> Cleaning docbook-xml-5.0 ---> Fetching docbook-xml ---> Verifying checksum(s) for docbook-xml ---> Extracting docbook-xml ---> Configuring docbook-xml ---> Building docbook-xml ---> Staging docbook-xml into destroot ---> Installing docbook-xml @5.0_0 ---> Activating docbook-xml @5.0_0 ---> Cleaning docbook-xml ---> Fetching docbook-xsl ---> Attempting to fetch docbook-xsl-1.76.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/docbook-xsl ---> Attempting to fetch docbook-xsl-doc-1.76.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/docbook-xsl ---> Verifying checksum(s) for docbook-xsl ---> Extracting docbook-xsl ---> Configuring docbook-xsl ---> Building docbook-xsl ---> Staging docbook-xsl into destroot ---> Installing docbook-xsl @1.76.1_0 ---> Activating docbook-xsl @1.76.1_0 ---> Cleaning docbook-xsl ---> Fetching gnome-common ---> Attempting to fetch gnome-common-2.28.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/gnome-common ---> Verifying checksum(s) for gnome-common ---> Extracting gnome-common ---> Applying patches to gnome-common ---> Configuring gnome-common ---> Building gnome-common ---> Staging gnome-common into destroot ---> Installing gnome-common @2.28.0_0 ---> Activating gnome-common @2.28.0_0 ---> Cleaning gnome-common ---> Fetching p5-getopt-long ---> Attempting to fetch Getopt-Long-2.38.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/CPAN/modules/by-module/Getopt ---> Verifying checksum(s) for p5-getopt-long ---> Extracting p5-getopt-long ---> Configuring p5-getopt-long ---> Building p5-getopt-long ---> Staging p5-getopt-long into destroot ---> Installing p5-getopt-long @2.38_1 ---> Activating p5-getopt-long @2.38_1 ---> Cleaning p5-getopt-long ---> Fetching p5-pathtools ---> Attempting to fetch PathTools-3.33.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/CPAN/modules/by-module/../../authors/id/S/SM/SMUELLER/ ---> Verifying checksum(s) for p5-pathtools ---> Extracting p5-pathtools ---> Configuring p5-pathtools ---> Building p5-pathtools ---> Staging p5-pathtools into destroot ---> Installing p5-pathtools @3.33_1 ---> Activating p5-pathtools @3.33_1 ---> Cleaning p5-pathtools ---> Fetching p5-scalar-list-utils ---> Attempting to fetch Scalar-List-Utils-1.23.tar.gz from ​ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Scalar ---> Verifying checksum(s) for p5-scalar-list-utils ---> Extracting p5-scalar-list-utils ---> Configuring p5-scalar-list-utils ---> Building p5-scalar-list-utils ---> Staging p5-scalar-list-utils into destroot ---> Installing p5-scalar-list-utils @1.23_1 ---> Activating p5-scalar-list-utils @1.23_1 ---> Cleaning p5-scalar-list-utils ---> Fetching p5-xml-parser ---> Attempting to fetch XML-Parser-2.40.tar.gz from ​ftp://ftp.cpan.org/pub/CPAN/modules/by-module/XML ---> Verifying checksum(s) for p5-xml-parser ---> Extracting p5-xml-parser ---> Configuring p5-xml-parser ---> Building p5-xml-parser ---> Staging p5-xml-parser into destroot ---> Installing p5-xml-parser @2.40_1 ---> Activating p5-xml-parser @2.40_1 ---> Cleaning p5-xml-parser ---> Fetching intltool ---> Attempting to fetch intltool-0.40.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/intltool ---> Verifying checksum(s) for intltool ---> Extracting intltool ---> Configuring intltool ---> Building intltool ---> Staging intltool into destroot ---> Installing intltool @0.40.6_0 ---> Activating intltool @0.40.6_0 ---> Cleaning intltool ---> Fetching iso-codes ---> Attempting to fetch iso-codes_3.25.orig.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/iso-codes ---> Verifying checksum(s) for iso-codes ---> Extracting iso-codes ---> Configuring iso-codes ---> Building iso-codes ---> Staging iso-codes into destroot ---> Installing iso-codes @3.25_0 ---> Activating iso-codes @3.25_0 ---> Cleaning iso-codes ---> Fetching libxslt ---> Attempting to fetch libxslt-1.1.26.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libxslt ---> Verifying checksum(s) for libxslt ---> Extracting libxslt ---> Configuring libxslt ---> Building libxslt ---> Staging libxslt into destroot ---> Installing libxslt @1.1.26_0 ---> Activating libxslt @1.1.26_0 ---> Cleaning libxslt ---> Fetching py27-libxml2 ---> Attempting to fetch libxml2-python-2.6.21.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python ---> Verifying checksum(s) for py27-libxml2 ---> Extracting py27-libxml2 ---> Applying patches to py27-libxml2 ---> Configuring py27-libxml2 ---> Building py27-libxml2 ---> Staging py27-libxml2 into destroot ---> Installing py27-libxml2 @2.6.21_0 ---> Activating py27-libxml2 @2.6.21_0 ---> Cleaning py27-libxml2 ---> Fetching getopt ---> Attempting to fetch getopt-1.1.4.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/getopt ---> Verifying checksum(s) for getopt ---> Extracting getopt ---> Applying patches to getopt ---> Configuring getopt ---> Building getopt ---> Staging getopt into destroot ---> Installing getopt @1.1.4_1 ---> Activating getopt @1.1.4_1 ---> Cleaning getopt ---> Fetching rarian ---> Attempting to fetch rarian-0.8.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/rarian ---> Verifying checksum(s) for rarian ---> Extracting rarian ---> Configuring rarian ---> Building rarian ---> Staging rarian into destroot ---> Installing rarian @0.8.1_0 ---> Activating rarian @0.8.1_0 ---> Cleaning rarian ---> Fetching gnome-doc-utils ---> Attempting to fetch gnome-doc-utils-0.20.5.tar.bz2 from ​http://lil.fr.distfiles.macports.org/gnome-doc-utils ---> Verifying checksum(s) for gnome-doc-utils ---> Extracting gnome-doc-utils ---> Configuring gnome-doc-utils ---> Building gnome-doc-utils ---> Staging gnome-doc-utils into destroot ---> Installing gnome-doc-utils @0.20.5_0+python27 ---> Activating gnome-doc-utils @0.20.5_0+python27 ---> Cleaning gnome-doc-utils ---> Fetching gtk-doc ---> Attempting to fetch gtk-doc-1.17.tar.bz2 from ​ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/gtk-doc/1.17/ ---> Verifying checksum(s) for gtk-doc ---> Extracting gtk-doc ---> Configuring gtk-doc ---> Building gtk-doc ---> Staging gtk-doc into destroot ---> Installing gtk-doc @1.17_0+python27 ---> Activating gtk-doc @1.17_0+python27 ---> Cleaning gtk-doc ---> Fetching dbus-glib ---> Attempting to fetch dbus-glib-0.92.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/dbus-glib ---> Verifying checksum(s) for dbus-glib ---> Extracting dbus-glib ---> Configuring dbus-glib ---> Building dbus-glib ---> Staging dbus-glib into destroot ---> Installing dbus-glib @0.92_0 ---> Activating dbus-glib @0.92_0 ---> Cleaning dbus-glib ---> Fetching libffi ---> Attempting to fetch libffi-3.0.9.tar.gz from ​http://lil.fr.distfiles.macports.org/libffi ---> Verifying checksum(s) for libffi ---> Extracting libffi ---> Applying patches to libffi ---> Configuring libffi ---> Building libffi ---> Staging libffi into destroot ---> Installing libffi @3.0.9_0 ---> Activating libffi @3.0.9_0 ---> Cleaning libffi ---> Fetching python26 ---> Attempting to fetch Python-2.6.6.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python26 ---> Verifying checksum(s) for python26 ---> Extracting python26 ---> Applying patches to python26 ---> Configuring python26 ---> Building python26 ---> Staging python26 into destroot ---> Installing python26 @2.6.6_1 ---> Activating python26 @2.6.6_1 To fully complete your installation and make python 2.6 the default, please run:

sudo port install python_select sudo python_select python26

---> Cleaning python26 ---> Fetching py26-gobject ---> Attempting to fetch pygobject-2.26.0.tar.bz2 from ​ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/pygobject/2.26/ ---> Verifying checksum(s) for py26-gobject ---> Extracting py26-gobject ---> Applying patches to py26-gobject ---> Configuring py26-gobject ---> Building py26-gobject ---> Staging py26-gobject into destroot ---> Installing py26-gobject @2.26.0_1 ---> Activating py26-gobject @2.26.0_1 ---> Cleaning py26-gobject ---> Fetching dbus-python26 ---> Attempting to fetch dbus-python-0.83.2.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/dbus-python26 ---> Verifying checksum(s) for dbus-python26 ---> Extracting dbus-python26 ---> Configuring dbus-python26 ---> Building dbus-python26 ---> Staging dbus-python26 into destroot ---> Installing dbus-python26 @0.83.2_0 ---> Activating dbus-python26 @0.83.2_0 ---> Cleaning dbus-python26 ---> Fetching libdaemon ---> Attempting to fetch libdaemon-0.14.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libdaemon ---> Verifying checksum(s) for libdaemon ---> Extracting libdaemon ---> Configuring libdaemon ---> Building libdaemon ---> Staging libdaemon into destroot ---> Installing libdaemon @0.14_0 ---> Activating libdaemon @0.14_0 ---> Cleaning libdaemon ---> Fetching atk ---> Attempting to fetch atk-1.32.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/atk ---> Verifying checksum(s) for atk ---> Extracting atk ---> Configuring atk ---> Building atk ---> Staging atk into destroot ---> Installing atk @1.32.0_0 ---> Activating atk @1.32.0_0 ---> Cleaning atk ---> Fetching jasper ---> Attempting to fetch jasper-1.900.1.zip from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/jasper ---> Verifying checksum(s) for jasper ---> Extracting jasper ---> Applying patches to jasper ---> Configuring jasper ---> Building jasper ---> Staging jasper into destroot ---> Installing jasper @1.900.1_7 ---> Activating jasper @1.900.1_7 ---> Cleaning jasper ---> Fetching gdk-pixbuf2 ---> Attempting to fetch gdk-pixbuf-2.22.1.tar.bz2 from ​ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/gdk-pixbuf/2.22/ ---> Verifying checksum(s) for gdk-pixbuf2 ---> Extracting gdk-pixbuf2 ---> Configuring gdk-pixbuf2 ---> Building gdk-pixbuf2 ---> Staging gdk-pixbuf2 into destroot ---> Installing gdk-pixbuf2 @2.22.1_1 ---> Activating gdk-pixbuf2 @2.22.1_1 ---> Cleaning gdk-pixbuf2 ---> Fetching libpixman ---> Attempting to fetch pixman-0.20.2.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libpixman ---> Verifying checksum(s) for libpixman ---> Extracting libpixman ---> Configuring libpixman ---> Building libpixman ---> Staging libpixman into destroot ---> Installing libpixman @0.20.2_0 ---> Activating libpixman @0.20.2_0 ---> Cleaning libpixman ---> Fetching cairo ---> Attempting to fetch cairo-1.10.2.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/cairo ---> Verifying checksum(s) for cairo ---> Extracting cairo ---> Configuring cairo ---> Building cairo ---> Staging cairo into destroot ---> Installing cairo @1.10.2_2 ---> Activating cairo @1.10.2_2 ---> Cleaning cairo ---> Fetching pango ---> Attempting to fetch pango-1.28.4.tar.bz2 from ​http://distfiles.macports.org/pango ---> Verifying checksum(s) for pango ---> Extracting pango ---> Applying patches to pango ---> Configuring pango ---> Building pango ---> Staging pango into destroot ---> Installing pango @1.28.4_0 ---> Activating pango @1.28.4_0 ---> Cleaning pango ---> Fetching shared-mime-info ---> Attempting to fetch shared-mime-info-0.90.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/shared-mime-info ---> Verifying checksum(s) for shared-mime-info ---> Extracting shared-mime-info ---> Configuring shared-mime-info ---> Building shared-mime-info ---> Staging shared-mime-info into destroot ---> Installing shared-mime-info @0.90_0 ---> Activating shared-mime-info @0.90_0 ---> Cleaning shared-mime-info ---> Fetching xorg-compositeproto ---> Attempting to fetch compositeproto-0.4.2.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-compositeproto ---> Verifying checksum(s) for xorg-compositeproto ---> Extracting xorg-compositeproto ---> Configuring xorg-compositeproto ---> Building xorg-compositeproto ---> Staging xorg-compositeproto into destroot ---> Installing xorg-compositeproto @0.4.2_0 ---> Activating xorg-compositeproto @0.4.2_0 ---> Cleaning xorg-compositeproto ---> Fetching xorg-fixesproto ---> Attempting to fetch fixesproto-5.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-fixesproto ---> Verifying checksum(s) for xorg-fixesproto ---> Extracting xorg-fixesproto ---> Configuring xorg-fixesproto ---> Building xorg-fixesproto ---> Staging xorg-fixesproto into destroot ---> Installing xorg-fixesproto @5.0_0 ---> Activating xorg-fixesproto @5.0_0 ---> Cleaning xorg-fixesproto ---> Fetching xorg-libXfixes ---> Attempting to fetch libXfixes-5.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXfixes ---> Verifying checksum(s) for xorg-libXfixes ---> Extracting xorg-libXfixes ---> Configuring xorg-libXfixes ---> Building xorg-libXfixes ---> Staging xorg-libXfixes into destroot ---> Installing xorg-libXfixes @5.0_0 ---> Activating xorg-libXfixes @5.0_0 ---> Cleaning xorg-libXfixes ---> Fetching xorg-libXcomposite ---> Attempting to fetch libXcomposite-0.4.3.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXcomposite ---> Verifying checksum(s) for xorg-libXcomposite ---> Extracting xorg-libXcomposite ---> Configuring xorg-libXcomposite ---> Building xorg-libXcomposite ---> Staging xorg-libXcomposite into destroot ---> Installing xorg-libXcomposite @0.4.3_0 ---> Activating xorg-libXcomposite @0.4.3_0 ---> Cleaning xorg-libXcomposite ---> Fetching xorg-libXcursor ---> Attempting to fetch libXcursor-1.1.11.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXcursor ---> Verifying checksum(s) for xorg-libXcursor ---> Extracting xorg-libXcursor ---> Configuring xorg-libXcursor ---> Building xorg-libXcursor ---> Staging xorg-libXcursor into destroot ---> Installing xorg-libXcursor @1.1.11_0 ---> Activating xorg-libXcursor @1.1.11_0 ---> Cleaning xorg-libXcursor ---> Fetching xorg-damageproto ---> Attempting to fetch damageproto-1.2.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-damageproto ---> Verifying checksum(s) for xorg-damageproto ---> Extracting xorg-damageproto ---> Configuring xorg-damageproto ---> Building xorg-damageproto ---> Staging xorg-damageproto into destroot ---> Installing xorg-damageproto @1.2.1_0 ---> Activating xorg-damageproto @1.2.1_0 ---> Cleaning xorg-damageproto ---> Fetching xorg-libXdamage ---> Attempting to fetch libXdamage-1.1.3.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXdamage ---> Verifying checksum(s) for xorg-libXdamage ---> Extracting xorg-libXdamage ---> Configuring xorg-libXdamage ---> Building xorg-libXdamage ---> Staging xorg-libXdamage into destroot ---> Installing xorg-libXdamage @1.1.3_0 ---> Activating xorg-libXdamage @1.1.3_0 ---> Cleaning xorg-libXdamage ---> Fetching xorg-libXi ---> Attempting to fetch libXi-1.4.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXi ---> Verifying checksum(s) for xorg-libXi ---> Extracting xorg-libXi ---> Configuring xorg-libXi ---> Building xorg-libXi ---> Staging xorg-libXi into destroot ---> Installing xorg-libXi @1.4.1_0 ---> Activating xorg-libXi @1.4.1_0 ---> Cleaning xorg-libXi ---> Fetching xorg-xineramaproto ---> Attempting to fetch xineramaproto-1.2.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-xineramaproto ---> Verifying checksum(s) for xorg-xineramaproto ---> Extracting xorg-xineramaproto ---> Configuring xorg-xineramaproto ---> Building xorg-xineramaproto ---> Staging xorg-xineramaproto into destroot ---> Installing xorg-xineramaproto @1.2.1_0 ---> Activating xorg-xineramaproto @1.2.1_0 ---> Cleaning xorg-xineramaproto ---> Fetching xorg-libXinerama ---> Attempting to fetch libXinerama-1.1.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXinerama ---> Verifying checksum(s) for xorg-libXinerama ---> Extracting xorg-libXinerama ---> Configuring xorg-libXinerama ---> Building xorg-libXinerama ---> Staging xorg-libXinerama into destroot ---> Installing xorg-libXinerama @1.1.1_0 ---> Activating xorg-libXinerama @1.1.1_0 ---> Cleaning xorg-libXinerama ---> Fetching xorg-randrproto ---> Attempting to fetch randrproto-1.3.2.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-randrproto ---> Verifying checksum(s) for xorg-randrproto ---> Extracting xorg-randrproto ---> Configuring xorg-randrproto ---> Building xorg-randrproto ---> Staging xorg-randrproto into destroot ---> Installing xorg-randrproto @1.3.2_0 ---> Activating xorg-randrproto @1.3.2_0 ---> Cleaning xorg-randrproto ---> Fetching xorg-libXrandr ---> Attempting to fetch libXrandr-1.3.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/xorg-libXrandr ---> Verifying checksum(s) for xorg-libXrandr ---> Extracting xorg-libXrandr ---> Configuring xorg-libXrandr ---> Building xorg-libXrandr ---> Staging xorg-libXrandr into destroot ---> Installing xorg-libXrandr @1.3.1_0 ---> Activating xorg-libXrandr @1.3.1_0 ---> Cleaning xorg-libXrandr ---> Fetching gtk2 ---> Attempting to fetch gtk+-2.24.4.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/gtk2 ---> Verifying checksum(s) for gtk2 ---> Extracting gtk2 ---> Applying patches to gtk2 ---> Configuring gtk2 ---> Building gtk2 ---> Staging gtk2 into destroot ---> Installing gtk2 @2.24.4_0+x11 ---> Activating gtk2 @2.24.4_0+x11 ---> Cleaning gtk2 ---> Fetching libglade2 ---> Attempting to fetch libglade-2.6.4.tar.bz2 from ​http://mirror.aarnet.edu.au/pub/gnome/sources/libglade/2.6/ ---> Verifying checksum(s) for libglade2 ---> Extracting libglade2 ---> Configuring libglade2 ---> Building libglade2 ---> Staging libglade2 into destroot ---> Installing libglade2 @2.6.4_3 ---> Activating libglade2 @2.6.4_3 ---> Cleaning libglade2 ---> Fetching gzip ---> Attempting to fetch gzip-1.4.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gzip ---> Verifying checksum(s) for gzip ---> Extracting gzip ---> Applying patches to gzip ---> Configuring gzip ---> Building gzip ---> Staging gzip into destroot ---> Installing gzip @1.4_0 ---> Activating gzip @1.4_0 ---> Cleaning gzip ---> Fetching atlas ---> Attempting to fetch atlas3.9.37.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/atlas ---> Attempting to fetch lapack-3.3.0.tgz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/atlas ---> Verifying checksum(s) for atlas ---> Extracting atlas ---> Applying patches to atlas ---> Configuring atlas ---> Building atlas ---> Staging atlas into destroot ---> Installing atlas @3.9.37_0+gcc44 ---> Activating atlas @3.9.37_0+gcc44 ---> Cleaning atlas ---> Fetching py26-distribute ---> Attempting to fetch distribute-0.6.15.zip from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python ---> Verifying checksum(s) for py26-distribute ---> Extracting py26-distribute ---> Configuring py26-distribute ---> Building py26-distribute ---> Staging py26-distribute into destroot ---> Installing py26-distribute @0.6.15_0 ---> Activating py26-distribute @0.6.15_0 ---> Cleaning py26-distribute ---> Fetching py26-nose ---> Attempting to fetch nose-1.0.0.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python ---> Verifying checksum(s) for py26-nose ---> Extracting py26-nose ---> Configuring py26-nose ---> Building py26-nose ---> Staging py26-nose into destroot ---> Installing py26-nose @1.0.0_0 ---> Activating py26-nose @1.0.0_0 ---> Cleaning py26-nose ---> Fetching py26-numpy ---> Attempting to fetch numpy-1.5.1.tar.gz from ​http://downloads.sourceforge.net/numpy ---> Verifying checksum(s) for py26-numpy ---> Extracting py26-numpy ---> Applying patches to py26-numpy ---> Configuring py26-numpy ---> Building py26-numpy ---> Staging py26-numpy into destroot ---> Installing py26-numpy @1.5.1_1+atlas+gcc44 ---> Activating py26-numpy @1.5.1_1+atlas+gcc44 ---> Cleaning py26-numpy ---> Fetching py26-py ---> Attempting to fetch py-1.1.1.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python ---> Verifying checksum(s) for py26-py ---> Extracting py26-py ---> Configuring py26-py ---> Building py26-py ---> Staging py26-py into destroot ---> Installing py26-py @1.1.1_0 ---> Activating py26-py @1.1.1_0 ---> Cleaning py26-py ---> Fetching py26-cairo ---> Attempting to fetch py2cairo-1.8.10.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/py26-cairo ---> Verifying checksum(s) for py26-cairo ---> Extracting py26-cairo ---> Configuring py26-cairo ---> Building py26-cairo ---> Staging py26-cairo into destroot ---> Installing py26-cairo @1.8.10_1 ---> Activating py26-cairo @1.8.10_1 ---> Cleaning py26-cairo ---> Fetching py26-gtk ---> Attempting to fetch pygtk-2.22.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/py26-gtk ---> Verifying checksum(s) for py26-gtk ---> Extracting py26-gtk ---> Configuring py26-gtk ---> Building py26-gtk ---> Staging py26-gtk into destroot ---> Installing py26-gtk @2.22.0_1 ---> Activating py26-gtk @2.22.0_1 ---> Cleaning py26-gtk ---> Fetching avahi ---> Attempting to fetch avahi-0.6.30.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/avahi ---> Verifying checksum(s) for avahi ---> Extracting avahi ---> Applying patches to avahi ---> Configuring avahi ---> Building avahi ---> Staging avahi into destroot ---> Installing avahi @0.6.30_0 ---> Activating avahi @0.6.30_0 ---> Cleaning avahi ---> Fetching cyrus-sasl2 ---> Attempting to fetch cyrus-sasl-2.1.23.tar.gz from ​http://ftp.andrew.cmu.edu/pub/cyrus-mail/ ---> Verifying checksum(s) for cyrus-sasl2 ---> Extracting cyrus-sasl2 ---> Applying patches to cyrus-sasl2 ---> Configuring cyrus-sasl2 ---> Building cyrus-sasl2 ---> Staging cyrus-sasl2 into destroot ---> Installing cyrus-sasl2 @2.1.23_3+kerberos ---> Activating cyrus-sasl2 @2.1.23_3+kerberos ---> Cleaning cyrus-sasl2 ---> Fetching curl-ca-bundle ---> Attempting to fetch curl-7.21.4.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Attempting to fetch certdata-1.74.txt from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Verifying checksum(s) for curl-ca-bundle ---> Extracting curl-ca-bundle ---> Applying patches to curl-ca-bundle ---> Configuring curl-ca-bundle ---> Building curl-ca-bundle ---> Staging curl-ca-bundle into destroot ---> Installing curl-ca-bundle @7.21.4_2 ---> Activating curl-ca-bundle @7.21.4_2 ---> Cleaning curl-ca-bundle ---> Fetching curl ---> Verifying checksum(s) for curl ---> Extracting curl ---> Applying patches to curl ---> Configuring curl ---> Building curl ---> Staging curl into destroot ---> Installing curl @7.21.4_0+ssl ---> Activating curl @7.21.4_0+ssl ---> Cleaning curl ---> Fetching p5-error ---> Attempting to fetch Error-0.17016.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/CPAN/modules/by-module/Error ---> Verifying checksum(s) for p5-error ---> Extracting p5-error ---> Configuring p5-error ---> Building p5-error ---> Staging p5-error into destroot ---> Installing p5-error @0.17016_1 ---> Activating p5-error @0.17016_1 ---> Cleaning p5-error ---> Fetching popt ---> Attempting to fetch popt-1.16.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/popt ---> Verifying checksum(s) for popt ---> Extracting popt ---> Configuring popt ---> Building popt ---> Staging popt into destroot ---> Installing popt @1.16_0 ---> Activating popt @1.16_0 ---> Cleaning popt ---> Fetching rsync ---> Attempting to fetch rsync-3.0.7.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/rsync ---> Verifying checksum(s) for rsync ---> Extracting rsync ---> Applying patches to rsync ---> Configuring rsync ---> Building rsync ---> Staging rsync into destroot ---> Installing rsync @3.0.7_1 ---> Activating rsync @3.0.7_1 ---> Cleaning rsync ---> Fetching git-core ---> Attempting to fetch git-1.7.4.4.tar.bz2 from ​http://lil.fr.distfiles.macports.org/git-core ---> Attempting to fetch git-manpages-1.7.4.4.tar.bz2 from ​http://lil.fr.distfiles.macports.org/git-core ---> Attempting to fetch git-htmldocs-1.7.4.4.tar.bz2 from ​http://lil.fr.distfiles.macports.org/git-core ---> Verifying checksum(s) for git-core ---> Extracting git-core ---> Applying patches to git-core ---> Configuring git-core ---> Building git-core ---> Staging git-core into destroot ---> Installing git-core @1.7.4.4_0+doc+python27 ---> Activating git-core @1.7.4.4_0+doc+python27 ---> Cleaning git-core ---> Fetching qjson ---> Verifying checksum(s) for qjson ---> Extracting qjson ---> Configuring qjson ---> Building qjson ---> Staging qjson into destroot ---> Installing qjson @0.7.1_1 ---> Activating qjson @0.7.1_1 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning qjson ---> Fetching dbusmenu-qt ---> Verifying checksum(s) for dbusmenu-qt ---> Extracting dbusmenu-qt ---> Configuring dbusmenu-qt ---> Building dbusmenu-qt ---> Staging dbusmenu-qt into destroot ---> Installing dbusmenu-qt @0.6.2_2 ---> Activating dbusmenu-qt @0.6.2_2 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning dbusmenu-qt ---> Fetching hunspell ---> Attempting to fetch hunspell-1.3.2.tar.gz from ​http://downloads.sourceforge.net/hunspell ---> Verifying checksum(s) for hunspell ---> Extracting hunspell ---> Applying patches to hunspell ---> Configuring hunspell ---> Building hunspell ---> Staging hunspell into destroot ---> Installing hunspell @1.3.2_0 ---> Activating hunspell @1.3.2_0 You must install (at least) one of the language dictionaries after installing this port in order for it to work. ---> Cleaning hunspell ---> Fetching enchant ---> Attempting to fetch enchant-1.6.0.tar.gz from ​http://distfiles.macports.org/enchant ---> Verifying checksum(s) for enchant ---> Extracting enchant ---> Configuring enchant ---> Building enchant ---> Staging enchant into destroot ---> Installing enchant @1.6.0_1 ---> Activating enchant @1.6.0_1 ---> Cleaning enchant ---> Fetching flex ---> Attempting to fetch flex-2.5.35.tar.bz2 from ​http://downloads.sourceforge.net/flex ---> Verifying checksum(s) for flex ---> Extracting flex ---> Configuring flex ---> Building flex ---> Staging flex into destroot ---> Installing flex @2.5.35_0 ---> Activating flex @2.5.35_0 ---> Cleaning flex ---> Fetching giflib ---> Attempting to fetch giflib-4.1.6.tar.bz2 from ​http://downloads.sourceforge.net/giflib ---> Verifying checksum(s) for giflib ---> Extracting giflib ---> Applying patches to giflib ---> Configuring giflib ---> Building giflib ---> Staging giflib into destroot ---> Installing giflib @4.1.6_1 ---> Activating giflib @4.1.6_1 ---> Cleaning giflib ---> Fetching gmake ---> Attempting to fetch make-3.82.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/make ---> Verifying checksum(s) for gmake ---> Extracting gmake ---> Configuring gmake ---> Building gmake ---> Staging gmake into destroot ---> Installing gmake @3.82_0 ---> Activating gmake @3.82_0 ---> Cleaning gmake ---> Fetching grantlee ---> Attempting to fetch grantlee-0.1.6.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/grantlee ---> Verifying checksum(s) for grantlee ---> Extracting grantlee ---> Configuring grantlee ---> Building grantlee ---> Staging grantlee into destroot ---> Installing grantlee @0.1.6_1 ---> Activating grantlee @0.1.6_1 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning grantlee ---> Fetching libusb ---> Attempting to fetch libusb-1.0.8.tar.bz2 from ​http://downloads.sourceforge.net/libusb ---> Verifying checksum(s) for libusb ---> Extracting libusb ---> Configuring libusb ---> Building libusb ---> Staging libusb into destroot ---> Installing libusb @1.0.8_0 ---> Activating libusb @1.0.8_0 ---> Cleaning libusb ---> Fetching libusb-compat ---> Attempting to fetch libusb-compat-0.1.3.tar.bz2 from ​http://downloads.sourceforge.net/libusb ---> Verifying checksum(s) for libusb-compat ---> Extracting libusb-compat ---> Configuring libusb-compat ---> Building libusb-compat ---> Staging libusb-compat into destroot ---> Installing libusb-compat @0.1.3_0 ---> Activating libusb-compat @0.1.3_0 ---> Cleaning libusb-compat ---> Fetching gnupg ---> Attempting to fetch gnupg-1.4.11.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/gnupg ---> Verifying checksum(s) for gnupg ---> Extracting gnupg ---> Configuring gnupg ---> Building gnupg ---> Staging gnupg into destroot ---> Installing gnupg @1.4.11_0 ---> Activating gnupg @1.4.11_0 ---> Cleaning gnupg ---> Fetching kerberos5 ---> Attempting to fetch krb5-1.7.1-signed.tar from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/kerberos5 ---> Verifying checksum(s) for kerberos5 ---> Extracting kerberos5 ---> Applying patches to kerberos5 ---> Configuring kerberos5 ---> Building kerberos5 ---> Staging kerberos5 into destroot ---> Installing kerberos5 @1.7.1_1 ---> Activating kerberos5 @1.7.1_1 ---> Cleaning kerberos5 ---> Fetching libart_lgpl ---> Attempting to fetch libart_lgpl-2.3.21.tar.bz2 from ​ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libart_lgpl/2.3/ ---> Verifying checksum(s) for libart_lgpl ---> Extracting libart_lgpl ---> Applying patches to libart_lgpl ---> Configuring libart_lgpl ---> Building libart_lgpl ---> Staging libart_lgpl into destroot ---> Installing libart_lgpl @2.3.21_0 ---> Activating libart_lgpl @2.3.21_0 ---> Cleaning libart_lgpl ---> Fetching liblzma ---> Attempting to fetch xz-5.0.2.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/liblzma ---> Verifying checksum(s) for liblzma ---> Extracting liblzma ---> Configuring liblzma ---> Building liblzma ---> Staging liblzma into destroot ---> Installing liblzma @5.0.2_0 ---> Activating liblzma @5.0.2_0 ---> Cleaning liblzma ---> Fetching gsed ---> Attempting to fetch sed-4.2.1.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/sed ---> Verifying checksum(s) for gsed ---> Extracting gsed ---> Configuring gsed ---> Building gsed ---> Staging gsed into destroot ---> Installing gsed @4.2.1_1 ---> Activating gsed @4.2.1_1 ---> Cleaning gsed ---> Fetching ilmbase ---> Attempting to fetch ilmbase-1.0.2.tar.gz from ​http://savannah.nongnu.org/download/openexr ---> Verifying checksum(s) for ilmbase ---> Extracting ilmbase ---> Applying patches to ilmbase ---> Configuring ilmbase ---> Building ilmbase ---> Staging ilmbase into destroot ---> Installing ilmbase @1.0.2_0 ---> Activating ilmbase @1.0.2_0 ---> Cleaning ilmbase ---> Fetching openexr ---> Attempting to fetch openexr-1.6.1.tar.gz from ​http://savannah.nongnu.org/download/openexr ---> Verifying checksum(s) for openexr ---> Extracting openexr ---> Applying patches to openexr ---> Configuring openexr ---> Building openexr ---> Staging openexr into destroot ---> Installing openexr @1.6.1_1 ---> Activating openexr @1.6.1_1 ---> Cleaning openexr ---> Fetching pcre ---> Attempting to fetch pcre-8.12.tar.bz2 from ​http://downloads.sourceforge.net/pcre ---> Verifying checksum(s) for pcre ---> Extracting pcre ---> Configuring pcre ---> Building pcre ---> Staging pcre into destroot ---> Installing pcre @8.12_0 ---> Activating pcre @8.12_0 ---> Cleaning pcre ---> Fetching qca ---> Attempting to fetch qca-2.0.2.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/qca ---> Verifying checksum(s) for qca ---> Extracting qca ---> Applying patches to qca ---> Configuring qca ---> Building qca ---> Staging qca into destroot ---> Installing qca @2.0.2_6 ---> Activating qca @2.0.2_6 ---> Cleaning qca ---> Fetching shared-desktop-ontologies ---> Attempting to fetch shared-desktop-ontologies-0.6.0.tar.bz2 from ​http://downloads.sourceforge.net/oscaf ---> Verifying checksum(s) for shared-desktop-ontologies ---> Extracting shared-desktop-ontologies ---> Configuring shared-desktop-ontologies ---> Building shared-desktop-ontologies ---> Staging shared-desktop-ontologies into destroot ---> Installing shared-desktop-ontologies @0.6.0_1 ---> Activating shared-desktop-ontologies @0.6.0_1 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning shared-desktop-ontologies ---> Fetching clucene ---> Attempting to fetch clucene-core-0.9.21b.tar.bz2 from ​http://downloads.sourceforge.net/clucene ---> Verifying checksum(s) for clucene ---> Extracting clucene ---> Configuring clucene ---> Building clucene ---> Staging clucene into destroot ---> Installing clucene @0.9.21b_0 ---> Activating clucene @0.9.21b_0 ---> Cleaning clucene ---> Fetching libiodbc ---> Attempting to fetch libiodbc-3.52.7.tar.gz from ​http://www.iodbc.org/downloads/iODBC ---> Verifying checksum(s) for libiodbc ---> Extracting libiodbc ---> Configuring libiodbc ---> Building libiodbc ---> Staging libiodbc into destroot ---> Installing libiodbc @3.52.7_0 ---> Activating libiodbc @3.52.7_0 ---> Cleaning libiodbc ---> Fetching raptor ---> Attempting to fetch raptor-1.4.21.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/raptor ---> Verifying checksum(s) for raptor ---> Extracting raptor ---> Configuring raptor ---> Building raptor ---> Staging raptor into destroot ---> Installing raptor @1.4.21_1 ---> Activating raptor @1.4.21_1 ---> Cleaning raptor ---> Fetching rasqal ---> Attempting to fetch rasqal-0.9.21.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/rasqal ---> Verifying checksum(s) for rasqal ---> Extracting rasqal ---> Configuring rasqal ---> Building rasqal ---> Staging rasqal into destroot ---> Installing rasqal @0.9.21_0 ---> Activating rasqal @0.9.21_0 ---> Cleaning rasqal ---> Fetching redland ---> Attempting to fetch redland-1.0.12.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/redland ---> Verifying checksum(s) for redland ---> Extracting redland ---> Configuring redland ---> Building redland ---> Staging redland into destroot ---> Installing redland @1.0.12_0+db46 ---> Activating redland @1.0.12_0+db46 ---> Cleaning redland ---> Fetching strigi ---> Attempting to fetch strigi-0.6.4.tar.bz2 from ​http://downloads.sourceforge.net/strigi ---> Verifying checksum(s) for strigi ---> Extracting strigi ---> Applying patches to strigi ---> Configuring strigi ---> Building strigi ---> Staging strigi into destroot ---> Installing strigi @0.6.4_0 ---> Activating strigi @0.6.4_0 ---> Cleaning strigi ---> Fetching gawk ---> Attempting to fetch gawk-3.1.8.tar.bz2 from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gawk ---> Verifying checksum(s) for gawk ---> Extracting gawk ---> Configuring gawk ---> Building gawk ---> Staging gawk into destroot ---> Installing gawk @3.1.8_1 ---> Activating gawk @3.1.8_1 ---> Cleaning gawk ---> Fetching virtuoso ---> Attempting to fetch virtuoso-opensource-6.1.3.tar.gz from ​http://downloads.sourceforge.net/project/virtuoso/virtuoso/6.1.3 ---> Verifying checksum(s) for virtuoso ---> Extracting virtuoso ---> Configuring virtuoso ---> Building virtuoso ---> Staging virtuoso into destroot ---> Installing virtuoso @6.1.3_0 ---> Activating virtuoso @6.1.3_0 ---> Cleaning virtuoso ---> Fetching soprano ---> Attempting to fetch soprano-2.6.0.tar.bz2 from ​http://downloads.sourceforge.net/soprano ---> Verifying checksum(s) for soprano ---> Extracting soprano ---> Configuring soprano ---> Building soprano ---> Staging soprano into destroot ---> Installing soprano @2.6.0_0 ---> Activating soprano @2.6.0_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning soprano ---> Fetching kdelibs4 ---> Attempting to fetch kdelibs-4.6.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/4.6.2/src/ ---> Verifying checksum(s) for kdelibs4 ---> Extracting kdelibs4 ---> Applying patches to kdelibs4 ---> Configuring kdelibs4 ---> Building kdelibs4 ---> Staging kdelibs4 into destroot ---> Installing kdelibs4 @4.6.2_0 ---> Activating kdelibs4 @4.6.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning kdelibs4 ---> Fetching libssh ---> Attempting to fetch libssh-0.4.7.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libssh ---> Verifying checksum(s) for libssh ---> Extracting libssh ---> Applying patches to libssh ---> Configuring libssh ---> Building libssh ---> Staging libssh into destroot ---> Installing libssh @0.4.7_0 ---> Activating libssh @0.4.7_0 ---> Cleaning libssh ---> Fetching openslp ---> Attempting to fetch openslp-1.2.1.tar.gz from ​http://voxel.dl.sourceforge.net/openslp ---> Verifying checksum(s) for openslp ---> Extracting openslp ---> Applying patches to openslp ---> Configuring openslp ---> Building openslp ---> Staging openslp into destroot ---> Installing openslp @1.2.1_2 ---> Activating openslp @1.2.1_2 ---> Cleaning openslp ---> Fetching oxygen-icons ---> Attempting to fetch oxygen-icons-4.6.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/4.6.2/src/ ---> Verifying checksum(s) for oxygen-icons ---> Extracting oxygen-icons ---> Configuring oxygen-icons ---> Building oxygen-icons ---> Staging oxygen-icons into destroot ---> Installing oxygen-icons @4.6.2_0 ---> Activating oxygen-icons @4.6.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning oxygen-icons ---> Fetching qimageblitz ---> Attempting to fetch qimageblitz-0.0.6.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/qimageblitz/ ---> Verifying checksum(s) for qimageblitz ---> Extracting qimageblitz ---> Configuring qimageblitz ---> Building qimageblitz ---> Staging qimageblitz into destroot ---> Installing qimageblitz @0.0.6_0 ---> Activating qimageblitz @0.0.6_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning qimageblitz ---> Fetching kdebase4-runtime ---> Attempting to fetch kdebase-runtime-4.6.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/4.6.2/src/ ---> Verifying checksum(s) for kdebase4-runtime ---> Extracting kdebase4-runtime ---> Configuring kdebase4-runtime ---> Building kdebase4-runtime ---> Staging kdebase4-runtime into destroot ---> Installing kdebase4-runtime @4.6.2_0 ---> Activating kdebase4-runtime @4.6.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning kdebase4-runtime ---> Fetching icu ---> Attempting to fetch icu4c-4_6_1-src.tgz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/icu ---> Verifying checksum(s) for icu ---> Extracting icu ---> Applying patches to icu ---> Configuring icu ---> Building icu ---> Staging icu into destroot ---> Installing icu @4.6.1_0 ---> Activating icu @4.6.1_0 ---> Cleaning icu ---> Fetching boost ---> Attempting to fetch boost_1_46_1.tar.bz2 from ​http://downloads.sourceforge.net/boost ---> Verifying checksum(s) for boost ---> Extracting boost ---> Applying patches to boost ---> Configuring boost ---> Building boost ---> Staging boost into destroot ---> Installing boost @1.46.1_0 ---> Activating boost @1.46.1_0 ---> Cleaning boost ---> Fetching mysql5 ---> Attempting to fetch mysql-5.1.56.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/mysql5 ---> Verifying checksum(s) for mysql5 ---> Extracting mysql5 ---> Applying patches to mysql5 ---> Configuring mysql5 ---> Building mysql5 ---> Staging mysql5 into destroot ---> Installing mysql5 @5.1.56_0 The MySQL client has been installed. If you also want a MySQL server, install the mysql5-server port. ---> Activating mysql5 @5.1.56_0 ---> Cleaning mysql5 ---> Fetching mysql5-server ---> Verifying checksum(s) for mysql5-server ---> Extracting mysql5-server ---> Configuring mysql5-server ---> Building mysql5-server ---> Staging mysql5-server into destroot ---> Creating launchd control script ########################################################### # A startup item has been generated that will aid in # starting mysql5-server with launchd. It is disabled # by default. Execute the following command to start it, # and to cause it to launch at startup: # # sudo port load mysql5-server ########################################################### ---> Installing mysql5-server @5.1.56_0

• In order to setup the database, you might want to run
• sudo -u _mysql mysql_install_db5
• if this is a new install

---> Activating mysql5-server @5.1.56_0 ---> Cleaning mysql5-server ---> Fetching akonadi ---> Attempting to fetch akonadi-1.5.2.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/akonadi ---> Verifying checksum(s) for akonadi ---> Extracting akonadi ---> Configuring akonadi ---> Building akonadi ---> Staging akonadi into destroot ---> Installing akonadi @1.5.2_0 ---> Activating akonadi @1.5.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning akonadi ---> Fetching libgpg-error ---> Attempting to fetch libgpg-error-1.10.tar.bz2 from ​http://distfiles.macports.org/libgpg-error ---> Verifying checksum(s) for libgpg-error ---> Extracting libgpg-error ---> Applying patches to libgpg-error ---> Configuring libgpg-error ---> Building libgpg-error ---> Staging libgpg-error into destroot ---> Installing libgpg-error @1.10_0 ---> Activating libgpg-error @1.10_0 ---> Cleaning libgpg-error ---> Fetching pth ---> Attempting to fetch pth-2.0.7.tar.gz from ​http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/pth ---> Verifying checksum(s) for pth ---> Extracting pth ---> Configuring pth ---> Building pth ---> Staging pth into destroot ---> Installing pth @2.0.7_0 ---> Activating pth @2.0.7_0 ---> Cleaning pth ---> Fetching libassuan ---> Attempting to fetch libassuan-2.0.1.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libassuan ---> Verifying checksum(s) for libassuan ---> Extracting libassuan ---> Applying patches to libassuan ---> Configuring libassuan ---> Building libassuan ---> Staging libassuan into destroot ---> Installing libassuan @2.0.1_1 ---> Activating libassuan @2.0.1_1 ---> Cleaning libassuan ---> Fetching gpgme ---> Attempting to fetch gpgme-1.3.0.tar.bz2 from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/gpgme ---> Verifying checksum(s) for gpgme ---> Extracting gpgme ---> Configuring gpgme ---> Building gpgme ---> Staging gpgme into destroot ---> Installing gpgme @1.3.0_0 ---> Activating gpgme @1.3.0_0 ---> Cleaning gpgme ---> Fetching libical ---> Attempting to fetch libical-0.43.tar.gz from ​http://downloads.sourceforge.net/freeassociation ---> Verifying checksum(s) for libical ---> Extracting libical ---> Applying patches to libical ---> Configuring libical ---> Building libical ---> Staging libical into destroot ---> Installing libical @0.43_1 ---> Activating libical @0.43_1 ---> Cleaning libical ---> Fetching openldap ---> Attempting to fetch openldap-2.4.21.tgz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/openldap ---> Verifying checksum(s) for openldap ---> Extracting openldap ---> Applying patches to openldap ---> Configuring openldap ---> Building openldap ---> Staging openldap into destroot ---> Creating launchd control script ########################################################### # A startup item has been generated that will aid in # starting openldap with launchd. It is disabled # by default. Execute the following command to start it, # and to cause it to launch at startup: # # sudo port load openldap ########################################################### ---> Installing openldap @2.4.21_3 ---> Activating openldap @2.4.21_3 ---> Cleaning openldap ---> Fetching kdepimlibs4 ---> Attempting to fetch kdepimlibs-4.6.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/4.6.2/src/ ---> Verifying checksum(s) for kdepimlibs4 ---> Extracting kdepimlibs4 ---> Configuring kdepimlibs4 ---> Building kdepimlibs4 ---> Staging kdepimlibs4 into destroot ---> Installing kdepimlibs4 @4.6.2_0 ---> Activating kdepimlibs4 @4.6.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning kdepimlibs4 ---> Fetching kdebase4 ---> Attempting to fetch kdebase-4.6.2.tar.bz2 from ​http://mirrors.mit.edu/kde/stable/4.6.2/src/ ---> Verifying checksum(s) for kdebase4 ---> Extracting kdebase4 ---> Configuring kdebase4 ---> Building kdebase4 ---> Staging kdebase4 into destroot ---> Installing kdebase4 @4.6.2_0 ---> Activating kdebase4 @4.6.2_0 ########################################################## # Don't forget that dbus needs to be started as the local # user (not with sudo) before any KDE programs will launch # To start it run the following command: # launchctl load /Library/LaunchAgents/org.freedesktop.dbus-session.plist ########################################################## ###################################################### # Programs will not start until you run the command # 'sudo chown -R $USER ~/Library/Preferences/KDE' # replacing $USER with your username. ###################################################### ---> Cleaning kdebase4 ---> Fetching kst ---> Attempting to fetch kst-1.7.0.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/kst ---> Verifying checksum(s) for kst ---> Extracting kst ---> Configuring kst Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for kst is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_kst/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install kst

port install qtiplot +origin Port command started with PID 8435 Warning: port definitions are more than two weeks old, consider using selfupdate ---> Computing dependencies for qtiplot ---> Dependencies to be installed: muparser treehh ---> Fetching muparser ---> Attempting to fetch muparser_v132.tar.gz from ​http://voxel.dl.sourceforge.net/muparser ---> Verifying checksum(s) for muparser ---> Extracting muparser ---> Applying patches to muparser ---> Configuring muparser ---> Building muparser ---> Staging muparser into destroot ---> Installing muparser @1.32_0 ---> Activating muparser @1.32_0 ---> Cleaning muparser ---> Fetching treehh ---> Attempting to fetch tree-2.65.tar.gz from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/treehh ---> Verifying checksum(s) for treehh ---> Extracting treehh ---> Configuring treehh ---> Building treehh ---> Staging treehh into destroot ---> Installing treehh @2.65_1 ---> Activating treehh @2.65_1 ---> Cleaning treehh ---> Fetching qtiplot ---> Attempting to fetch patch-importOPJ.cpp.diff from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/qtiplot ---> Attempting to fetch patch-importOPJ.cpp.diff from ​http://distfiles.macports.org/qtiplot ---> Attempting to fetch patch-importOPJ.cpp.diff from ​http://download.berlios.de/qtiplot/ ---> Attempting to fetch qtiplot-0.9.8.3.zip from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/qtiplot ---> Attempting to fetch QTeXEngine-0.2-opensource.zip from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/qtiplot ---> Attempting to fetch liborigin2-13092010.zip from ​http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/qtiplot ---> Verifying checksum(s) for qtiplot Error: No checksum set for patch-importOPJ.cpp.diff Error: Target org.macports.checksum returned: Unable to verify file checksums Log for qtiplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_aqua_qtiplot/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +origin

port install qtiplot Port command started with PID 9493 Warning: port definitions are more than two weeks old, consider using selfupdate Error: Requested variants "" do not match original selection "+origin". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot

port install qtiplot Port command started with PID 9495 Warning: port definitions are more than two weeks old, consider using selfupdate Error: Requested variants "" do not match original selection "+origin". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot

port install qtiplot +python26 Port command started with PID 9502 Warning: port definitions are more than two weeks old, consider using selfupdate Error: Requested variants "+python26" do not match original selection "+origin". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python26

port install qtiplot +python26 Port command started with PID 16942 Warning: No port p5.12-locale-gettext found in the index. ---> Fetching archive for gperf Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade pkgconfig failed To report a bug, see <​http://guide.macports.org/#project.tickets>

port install qtiplot +python25 Port command started with PID 16971 Error: Requested variants "+python25" do not match original selection "+python26". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python25

port install qtiplot +origin Port command started with PID 16982 Error: Requested variants "" do not match original selection "+python26". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +origin

port install qtiplot +python26 +origin Port command started with PID 28716 Error: Requested variants "+python26" do not match original selection "". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python26 +origin

port clean --all qtiplot Port command started with PID 28747 ---> Cleaning qtiplot

port install qtiplot +python26 Port command started with PID 28759 Warning: No port p5.12-locale-gettext found in the index. ---> Computing dependencies for help2man Error: Dependency 'p5.12-locale-gettext' not found. Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade pkgconfig failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python26

port install qtiplot +python26 Port command started with PID 28800 Warning: No port p5.12-locale-gettext found in the index. ---> Computing dependencies for help2man Error: Dependency 'p5.12-locale-gettext' not found. Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade pkgconfig failed To report a bug, see <​http://guide.macports.org/#project.tickets>

port install qtiplot +python26 Port command started with PID 14871 ---> Computing dependencies for qt4-mac ---> Building qt4-mac Error: Target org.macports.build returned: shell command failed (see log for details) Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade qt4-mac failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python26

port clean --work qtiplot Port command started with PID 14933 ---> Cleaning qtiplot ---> Executing: /opt/local/bin/port clean --work qtiplot

port install qtiplot +origin Port command started with PID 15135 ---> Computing dependencies for qt4-mac ---> Building qt4-mac Error: Target org.macports.build returned: shell command failed (see log for details) Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade qt4-mac failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +origin

port clean --work qtiplot Port command started with PID 15183 ---> Cleaning qtiplot ---> Executing: /opt/local/bin/port clean --work qtiplot

port install qt4-mac +universal Port command started with PID 15215 Error: Requested variants "+quartz+universal" do not match original selection "+quartz". Please use the same variants again, perform 'port clean qt4-mac' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qt4-mac +universal

port install qt4-mac Port command started with PID 15228 ---> Computing dependencies for qt4-mac ---> Building qt4-mac Error: Target org.macports.build returned: shell command failed (see log for details) Error: Unable to execute port: could not set effective gid to 0 To report a bug, see <​http://guide.macports.org/#project.tickets>

port install qtiplot +origin Port command started with PID 57635 Warning: port definitions are more than two weeks old, consider using selfupdate ---> Computing dependencies for qt4-mac ---> Fetching archive for qt4-mac Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade qt4-mac failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +origin

port selfupdate Port command started with PID 57652 Warning: port definitions are more than two weeks old, consider using selfupdate ---> Updating the ports tree ---> Updating MacPorts base sources using rsync MacPorts base version 2.0.1 installed, MacPorts base version 2.0.3 downloaded. ---> MacPorts base is outdated, installing new version 2.0.3 Installing new MacPorts release in /opt/local as Jimmy:admin; permissions 0755; Tcl-Package in /Library/Tcl The ports tree has been updated. To upgrade your installed ports, you should run

port upgrade outdated

---> Executing: /opt/local/bin/port selfupdate

port install qtiplot +python27 Port command started with PID 60382 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade pkgconfig failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python27

port install qtiplot +python27 Port command started with PID 60388 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade pkgconfig failed ---> Executing: /opt/local/bin/port install qtiplot +python27

port install qtiplot +python26 Port command started with PID 60396 Error: Requested variants "+python26" do not match original selection "+python27". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python26

port install qtiplot +python25 Port command started with PID 60398 Error: Requested variants "+python25" do not match original selection "+python27". Please use the same variants again, perform 'port clean qtiplot' or specify the force option (-f). Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python25

port clean --all qtiplot Port command started with PID 60403 ---> Cleaning qtiplot ---> Executing: /opt/local/bin/port clean --all qtiplot

port install qtiplot +python27 Port command started with PID 60421 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade pkgconfig failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install qtiplot +python27

port clean --work qtiplot Port command started with PID 63098 ---> Cleaning qtiplot ---> Executing: /opt/local/bin/port clean --work qtiplot

port install pkgconfig +universal Port command started with PID 63111 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade glib2 failed To report a bug, see <​http://guide.macports.org/#project.tickets> ---> Executing: /opt/local/bin/port install pkgconfig +universal

port clean --work pkgconfig Port command started with PID 63144 ---> Cleaning pkgconfig ---> Executing: /opt/local/bin/port clean --work pkgconfig

port selfupdate Port command started with PID 63911 ---> Updating MacPorts base sources using rsync MacPorts base version 2.0.3 installed, MacPorts base version 2.0.3 downloaded. ---> Updating the ports tree ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run

port upgrade outdated

---> Executing: /opt/local/bin/port selfupdate

port install pkgconfig +universal Port command started with PID 63938 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 ---> Executing: /opt/local/bin/port install pkgconfig +universal

port install pkgconfig +universal Port command started with PID 63943 ---> Fetching archive for gdbm Error: Target org.macports.archivefetch returned: could not set effective gid to 0 Error: Unable to upgrade port: could not set effective gid to 0 Error: Unable to execute port: upgrade glib2 failed ---> Executing: /opt/local/bin/port install pkgconfig +universal

[jimmymisc@…]

sorry, it came out as garbled, is it possible to fix this as I do not know how ?

[mf2k (Frank Schima)]

We do not support using Enthought python. You should uninstall it and use macports python. For now, you can either delete or move /usr/local/. We also do not support Porticus. Please follow up in the ​Macports-Users mailing list if you still need help. Trac is not for tech support.